Resolves: #476096

Summary: move perl on solaris to a <TBD> path
Description: Changing Solaris perl path (perlexec) from /opt/perl5x/bin/perl to /usr/lib/sparcv9/dirsrv/perl5x/bin/perl.

Makefile.in

@@ -935,6 +935,7 @@ PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 SOLARIS_FALSE = @SOLARIS_FALSE@

aclocal.m4

@@ -1578,10 +1578,27 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # find out which ABI we are using
+  libsuff=
+  case "$host_cpu" in
+  x86_64*|s390x*|powerpc64*)
+    echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+    if AC_TRY_EVAL(ac_compile); then
+      case `/usr/bin/file conftest.$ac_objext` in
+      *64-bit*)
+        libsuff=64
+        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
+        ;;
+      esac
+    fi
+    rm -rf conftest*
+    ;;
+  esac
+
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -4288,6 +4305,9 @@ CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
 # Is the compiler the GNU C compiler?
 with_gcc=$_LT_AC_TAGVAR(GCC, $1)
 
+gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\`
+gcc_ver=\`gcc -dumpversion\`
+
 # An ERE matcher.
 EGREP=$lt_EGREP
 
@@ -4421,11 +4441,11 @@ striplib=$lt_striplib
 
 # Dependencies to place before the objects being linked to create a
 # shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+predep_objects=\`echo $lt_[]_LT_AC_TAGVAR(predep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
 
 # Dependencies to place after the objects being linked to create a
 # shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+postdep_objects=\`echo $lt_[]_LT_AC_TAGVAR(postdep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
 
 # Dependencies to place before the objects being linked to create a
 # shared library.
@@ -4437,7 +4457,7 @@ postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
 
 # The library search path used internally by the compiler when linking
 # a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+compiler_lib_search_path=\`echo $lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
 
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
@@ -4517,7 +4537,7 @@ variables_saved_for_relink="$variables_saved_for_relink"
 link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
 
 # Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
 
 # Run-time system search path for libraries
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
@@ -6353,6 +6373,7 @@ do
     done
   done
 done
+IFS=$as_save_IFS
 lt_ac_max=0
 lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
@@ -6385,6 +6406,7 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
 done
 ])
 SED=$lt_cv_path_SED
+AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
 ])
 

configure.ac

@@ -388,7 +388,7 @@ dnl Cstd and Crun are required to link any C++ related code
     AC_SUBST([LIBCRUN], [$LIBCRUN])
     platform="solaris"
     # assume 64 bit
-    perlexec='/opt/perl5x/bin/perl'
+    perlexec='/usr/lib/sparcv9/dirsrv/perl5x/bin/perl'
     # relative to sysconfdir
     initdir=/init.d
     ;;

ltmain.sh

@@ -46,10 +46,16 @@ PACKAGE=libtool
 VERSION=1.5.22
 TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
 
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
 fi
 
 # Check that we have a working $echo.
@@ -105,12 +111,14 @@ esac
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
 # We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
+for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+         save_$lt_var=\$$lt_var
+         $lt_var=C
+         export $lt_var
+       fi"
+done
 
 # Make sure IFS has a sensible default
 lt_nl='
@@ -136,6 +144,8 @@ duplicate_deps=no
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
 #####################################
 # Shell function definitions:
@@ -327,7 +337,17 @@ func_extract_archives ()
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xdir="$my_gentop/$my_xlib"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+       *" $my_xlib_u "*)
+         extracted_serial=`expr $extracted_serial + 1`
+         my_xlib_u=lt$extracted_serial-$my_xlib ;;
+       *) break ;;
+       esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
 
       $show "${rm}r $my_xdir"
       $run ${rm}r "$my_xdir"
@@ -758,6 +778,7 @@ if test -z "$show_help"; then
     *.f90) xform=f90 ;;
     *.for) xform=for ;;
     *.java) xform=java ;;
+    *.obj) xform=obj ;;
     esac
 
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -1138,8 +1159,9 @@ EOF
     for arg
     do
       case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
+      -all-static | -static | -static-libtool-libs)
+    case $arg in
+    -all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
 	  fi
@@ -1147,12 +1169,20 @@ EOF
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
-	else
+	  ;;
+    -static)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built
-	fi
+	  ;;
+    -static-libtool-libs)
+      if test -z "$pic_flag" && test -n "$link_static_flag"; then
+        dlopen_self=$dlopen_self_static
+      fi
+      prefer_static_libs=yes
+      ;;
+    esac
 	build_libtool_libs=no
 	build_old_libs=yes
 	break
@@ -1712,7 +1742,7 @@ EOF
 	continue
 	;;
 
-      -static)
+      -static | -static-libtool-libs)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
@@ -2490,7 +2520,9 @@ EOF
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+         { { test "$prefer_static_libs" = no ||
+             test "$prefer_static_libs,$installed" = "built,yes"; } ||
+           test -z "$old_library"; }; then
 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
@@ -3186,7 +3218,7 @@ EOF
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
-	  darwin|linux|osf|windows)
+	  darwin|linux|osf|windows|none)
 	    current=`expr $number_major + $number_minor`
 	    age="$number_minor"
 	    revision="$number_revision"
@@ -3410,11 +3442,11 @@ EOF
       fi
 
       # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-      done
+#      for path in $notinst_path; do
+#	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+#	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+#	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+#      done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -3515,13 +3547,12 @@ EOF
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
+      if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
 	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" -ne "0"; then
+              if test "$name" != "" && test "$name" != "0"; then
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -3560,9 +3591,7 @@ EOF
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		$LTCC $LTCFLAGS -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
@@ -3594,7 +3623,7 @@ EOF
 		  droppeddeps=yes
 		  $echo
 		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
+		  $echo "*** make it link in!  You will probably need to install it or some"
 		  $echo "*** library that it depends on before this library will be fully"
 		  $echo "*** functional.  Installing it before continuing would be even better."
 		fi
@@ -4239,12 +4268,14 @@ EOF
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
       wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+      reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -4692,16 +4723,16 @@ static const void *lt_preloaded_setup() {
           case $host in
           *cygwin* | *mingw* )
             if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
             else
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
              fi
             ;;
           * )
-            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
             ;;
           esac
 	  ;;
@@ -4716,13 +4747,13 @@ static const void *lt_preloaded_setup() {
 	# really was required.
 
 	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
       fi
 
       if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
@@ -4809,7 +4840,7 @@ static const void *lt_preloaded_setup() {
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -4846,7 +4877,7 @@ static const void *lt_preloaded_setup() {
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
       fi
 
       # Quote $echo for shipping.
@@ -5253,6 +5284,18 @@ EOF
 Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
@@ -5395,7 +5438,7 @@ else
 	  ;;
 	esac
 	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      \$echo \"\$0: cannot exec \$program \$*\"
       exit $EXIT_FAILURE
     fi
   else
@@ -5581,7 +5624,7 @@ fi\
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -5926,9 +5969,9 @@ relink_command=\"$relink_command\""
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
 	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
 	  fi
 
 	  $echo "$modename: warning: relinking \`$file'" 1>&2
@@ -6137,7 +6180,7 @@ relink_command=\"$relink_command\""
 	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
 
 	      $show "$relink_command"
 	      if $run eval "$relink_command"; then :
@@ -6413,12 +6456,15 @@ relink_command=\"$relink_command\""
       fi
 
       # Restore saved environment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
+      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+       eval "if test \"\${save_$lt_var+set}\" = set; then
+               $lt_var=\$save_$lt_var; export $lt_var
+             else
+               $lt_unset $lt_var
+             fi"
+      done
+
 
       # Now prepare to actually exec the command.
       exec_cmd="\$cmd$args"
@@ -6775,9 +6821,9 @@ The following components of LINK-COMMAND are treated specially:
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
+                    try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
+                    try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
@@ -6791,9 +6837,11 @@ The following components of LINK-COMMAND are treated specially:
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
+                    specify library version info [each variable defaults to 0]
 
 All other options (arguments beginning with \`-') are ignored.