Resolves: #229576

Summary: clean up template-scriptname which is derived from template-scriptname.in (comment #3,4)
Description: removing obsolete scripts:
    ds_viewlog.pl scripts/template-dsml-activate.pl
    scripts/template-migrateInstance5 scripts/template-migrateTo6
    scripts/template-migrate50to51
    scripts/template-migrateInstance6 scripts/template-migrate5to6
    scripts/template-migrateTo5

ldap/admin/src/ds_viewlog.pl

@@ -1,161 +0,0 @@
-#!/usr/bin/env perl
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-#
-
-# view the last N lines of the given file
-
-BEGIN {
-	# make stdout unbuffered for friendly CGI output
-	$| = 1;
-	# print CGI header
-	print "Content-type: text/plain\n\n";
-	# add the current directory to the beginning of the module
-	# search path (for our CGI.pm)
-	unshift @INC, '.';
-
-}
-
-my $dbfh; # debugging file handler
-sub debug {
-	# comment out the return line to enable debugging
-	return;
-
-	if (!$dbfh) {
-		$dbfh = 'mylog.txt';
-		open $dbfh, ">$dbfh" or die "Error: could not write $dbfh: $!";
-	}
-	print $dbfh "@_\n";
-}
-
-sub sigDieHandler {
-	&debug(@_, "\n");
-	print @_, "\n";
-	&debug("NMC_STATUS: ", $!+0, "\n");
-	print "NMC_STATUS: ", $!+0, "\n";
-	exit $!;
-}
-
-sub rpt_err {
-	my ($code, $value) = @_;
-	$! = $code;
-	die "Error: value $value is invalid: code $code";
-}
-
-$SIG{__DIE__} = 'sigDieHandler';
-my $DEF_SIZE = 25;
-
-# constants from dsalib.h
-my $DS_UNKNOWN_ERROR = -1;
-my $DS_NO_SERVER_ROOT = -10;
-my $DS_CANNOT_EXEC = -11;
-my $DS_CANNOT_OPEN_STAT_FILE = -12;
-my $DS_NULL_PARAMETER = -13;
-my $DS_SERVER_MUST_BE_DOWN = -14;
-my $DS_CANNOT_OPEN_BACKUP_FILE = -15;
-my $DS_NOT_A_DIRECTORY = -16;
-my $DS_CANNOT_CREATE_DIRECTORY = -17;
-my $DS_CANNOT_OPEN_LDIF_FILE = -18;
-my $DS_IS_A_DIRECTORY = -19;
-my $DS_CANNOT_CREATE_FILE = -20;
-my $DS_UNDEFINED_VARIABLE = -21;
-my $DS_NO_SUCH_FILE = -22;
-my $DS_CANNOT_DELETE_FILE = -23;
-my $DS_UNKNOWN_SNMP_COMMAND = -24;
-my $DS_NON_NUMERIC_VALUE = -25;
-my $DS_NO_LOGFILE_NAME = -26;
-my $DS_CANNOT_OPEN_LOG_FILE = -27;
-my $DS_HAS_TOBE_READONLY_MODE = -28;
-my $DS_INVALID_LDIF_FILE = -29;
-
-# process the CGI input
-use Cgi;
-
-my $num = $cgiVars{num};
-my $str = $cgiVars{str};
-my $logfile = $cgiVars{logfile};
-
-&debug("ENV:");
-foreach $item (keys %ENV) {
-	&debug("ENV $item = $ENV{$item}");
-}
-&debug("query string = ", $Cgi::QUERY_STRING);
-&debug("content = ", $CONTENT);
-&debug("cgiVars = ", %cgiVars);
-&debug("num = $num str = $str logfile = $logfile");
-
-if (! $num) {
-	$num = $DEF_SIZE;
-}
-
-if (! ($num =~ /\d+/))  {
-	&rpt_err( $DS_NON_NUMERIC_VALUE, $num );
-	return 1;
-}
-
-if (! $logfile) {
-	&rpt_err( $DS_NO_LOGFILE_NAME, "no logfile");
-}
-
-if (! -f $logfile) {
-	&rpt_err( $DS_CANNOT_OPEN_LOG_FILE, $logfile);
-}
-
-open(INP, $logfile) or &rpt_err( $DS_CANNOT_OPEN_LOG_FILE, $logfile);
-
-my $ii = 0;
-my @buf = ();
-while (<INP>) {
-	&debug("raw: $_");
-	if (!$str || /$str/i) {
-		$ii++;
-		$buf[$ii%$num] = $_;
-	}
-}
-close INP;
-
-my @tail = (@buf[ ($ii%$num + 1) .. $#buf ], 
-			@buf[  0 .. $ii%$num ]);
-&debug("tail size = ", scalar(@tail), " first line = $tail[0]");
-for (@tail) {
-	print if $_; # @tail may begin or end with undef
-	&debug($_) if $_;
-}
-
-die "Finished";

ldap/admin/src/scripts/template-dsml-activate.pl

@@ -1,260 +0,0 @@
-#{{PERL-EXEC}}
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-
-use Getopt::Std;
-use File::Copy "cp";
-use warnings;
-#use strict;
-
-sub usage {
-  print (STDERR "Arguments:\n");
-  print (STDERR " -i              - install\n");
-  print (STDERR " -u              - uninstall\n");
-  print (STDERR " -p              - optional dsml port, defaults to 8080\n\n");
-
-  exit 100;
-}
-
-# Process the command line arguments
-{
-    usage() if (!getopts('uip:'));
-    
-    $DSMLPORT=8080;
-    $DSMLPORT=$opt_p if ($opt_p);
-    my $SERVERNAME = "{{SERVER-NAME}}";
-    my $SERVERROOT = "{{DS-ROOT}}";
-    my $PATH="{{SEP}}admin-serv{{SEP}}config{{SEP}}";
-    my @FILES= ( "server.xml", "web-apps.xml", "obj.conf", "jvm12.conf" );
-
-    die "-i or -u required" if (!($opt_i || $opt_u));
-    die "-i OR -u required" if ($opt_i && $opt_u);    
-
-    if ($opt_i) {
-	if (-e "$SERVERROOT{{SEP}}clients{{SEP}}dsmlgw{{SEP}}dsmlgw.cfg" ) {
-	    print STDERR "leaving existing dsmlgw.cfg untouched.\n";
-	    } else {
-	open DSMLCFG, ">$SERVERROOT{{SEP}}clients{{SEP}}dsmlgw{{SEP}}dsmlgw.cfg";
-	select DSMLCFG;
-	print "\#properties file for the DSMLGW\n\nServerHost=${SERVERNAME}\nServerPort={{SERVER-PORT}}\nBindDN=\nBindPW=\n\n";
-	print "MinLoginPool=1\nMaxLoginPool=2\nMinPool=3\nMaxPool=15\n";
-	close DSMLCFG;
-    }
-
-	open WEB, ">$SERVERROOT{{SEP}}clients{{SEP}}dsmlgw{{SEP}}WEB-INF{{SEP}}web.xml";
-	select WEB;
-	    print <<EOF;
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<!DOCTYPE web-app SYSTEM "../web-app_2_3.dtd">
-
-<web-app>
-  <display-name>Apache-Axis</display-name>
-    
-    <listener>
-        <listener-class>org.apache.axis.transport.http.AxisHTTPSessionListener</listener-class>
-    </listener>
-    
-  <servlet>
-    <servlet-name>AxisServlet</servlet-name>
-    <display-name>Apache-Axis Servlet</display-name>
-    <servlet-class>
-        org.apache.axis.transport.http.AxisServlet
-    </servlet-class>
-  </servlet>
-
-  <servlet-mapping>
-    <servlet-name>AxisServlet</servlet-name>
-    <url-pattern>/services/*</url-pattern>
-  </servlet-mapping>
-
-    <session-config>
-        <!-- Default to 5 minute session timeouts -->
-        <session-timeout>5</session-timeout>
-    </session-config>
-
-  <mime-mapping>
-    <extension>wsdl</extension>
-    <mime-type>text/xml</mime-type>
-  </mime-mapping>
-  
-
-  <mime-mapping>
-    <extension>xsd</extension>
-    <mime-type>text/xml</mime-type>
-  </mime-mapping>
-
-  <welcome-file-list>
-    <welcome-file>index.html</welcome-file>
-    <welcome-file>index.jsp</welcome-file>
-    <welcome-file>index.jws</welcome-file>
-  </welcome-file-list>
-
-</web-app>
-
-EOF
-
-	
-	close WEB;
-    }
-
-    foreach $file (@FILES) {
-
-	if ($opt_u) {
-	    # restore from backups
-	    print STDOUT "${file}.bak -> ${file}\n";
-	    rename("${SERVERROOT}${PATH}${file}.bak","${SERVERROOT}${PATH}${file}");
-	}
-	if ($opt_i) {
-	    # make backups
-	    print STDOUT "${file} -> ${file}.bak\n";
-	    cp("${SERVERROOT}${PATH}${file}","${SERVERROOT}${PATH}${file}.bak");
-
-	    if ( $file eq "server.xml") {
-		open SERVER, "${SERVERROOT}${PATH}${file}" || die("Could not open file!");
-		@raw_data=<SERVER>;
-		close SERVER;
-
-		$i=0;
-
-		while ($line =  $raw_data[$i++]) {
-		    #if ($line =~ /CONNECTIONGROUP.*servername=\"([\w.?]+)\"/ ){
-			#$SERVERNAME = $1;
-		    #}
-
-		    if ($line =~ /\<\/LS/ ) {
-			splice @raw_data, $i++,0, 
-			("    <LS id=\"dsml-listener\" ip=\"0.0.0.0\" port=\"${DSMLPORT}\" security=\"off\" acceptorthreads=\"1\" blocking=\"no\">\n",
-			 "      <CONNECTIONGROUP id=\"dsml_default\" matchingip=\"default\" servername=\"${SERVERNAME}\" defaultvs=\"dsml-serv\"/></LS>\n" );
-			$i+=2;
-		    }
-		    
-		    if ($line =~ /\<\/VSCLASS/ ) {
-			splice @raw_data, $i, 0, 
-			("    <VSCLASS id=\"dsml\" objectfile=\"obj.conf\" rootobject=\"dsmlgw\" acceptlanguage=\"off\">\n" . 
-			 "<VARS nice=\"\" docroot=\"${SERVERROOT}{{SEP}}clients{{SEP}}dsmlgw\" webapps_file=\"web-apps.xml\" webapps_enable=\"on\"   />\n" . 
-			 "      <VS id=\"dsml-serv\" state=\"on\" connections=\"dsml_default\" urlhosts=\"${SERVERNAME}\" mime=\"mime1\" aclids=\"acl1\">\n" .
-			 "        <USERDB id=\"default\" database=\"default\"/>\n      </VS>\n    </VSCLASS>\n");
-			$i++;
-		    }
-		    
-		    
-		}
-		open SERVER, "> ${SERVERROOT}${PATH}${file}" || die("Could not open file!");
-		select SERVER;
-		print @raw_data;
-		close SERVER;
-	    }
-
-	    if ( $file eq "web-apps.xml" ) {
-		open WEBAPPS, "> ${SERVERROOT}${PATH}${file}";
-		select WEBAPPS;
-		print STDERR "adding necessary entry to $file.\n";
-		print <<EOF;
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE vs SYSTEM "file:${SERVERROOT}/bin/https/dtds/nes-webapps_6_2.dtd">
-
-<vs>
- <web-app uri="/axis" dir="${SERVERROOT}{{SEP}}clients{{SEP}}dsmlgw" enable="true"/>
-</vs>
-
-EOF
-
-                close WEBAPPS;
-		
-	    }
-
-	    if ( $file eq "obj.conf" ) {
-		open OBJ, ">> ${SERVERROOT}${PATH}${file}";
-		select OBJ;
-		print STDERR "adding necessary entry to $file.\n";
-		print <<EOF;
-<Object name="dsmlgw">
-ObjectType fn=type-by-extension
-ObjectType fn=force-type type=text/plain
-Service fn="NSServletService" type="magnus-internal/servlet"
-Service method=(GET|HEAD|POST) type=*~magnus-internal/* fn=send-file
-Error fn="admin-error" reason="server error"
-AddLog fn="admin40_flex_log" name="access"
-NameTrans fn="NSServletNameTrans" name="servlet"
-PathCheck fn=find-pathinfo
-PathCheck fn=find-index index-names="index.html,home.html"
-Service type="magnus-internal/jsp" fn="NSServletService"
-</Object>
-
-EOF
-
-               close OBJ;
-	    
-
-	    }
-
-	    if ( $file eq "jvm12.conf" ) {
-		if ($^O eq "linux") {
-		    # if setting Xbootclasspath, make sure crimson.jar is in it.
-		    $fulljvm12 = "${SERVERROOT}${PATH}${file}";
-		    $fulljvm12tmp = $fulljvm12 . ".tmp";
-		    $crimsonpath = "${SERVERROOT}/bin/https/jar/crimson.jar";
-		    $ibmpath = "${SERVERROOT}/bin/base/jre/lib/ibmpkcs.jar";
-		    open JVM, "${fulljvm12}";
-		    open JVMTMP, "> ${fulljvm12tmp}";
-		    for ($line=<JVM>; $line; $line=<JVM>) {
-			if ($line =~ /Xbootclasspath/) {
-			    if (!($line =~ /${crimsonpath}/)) {
-				$line =~ s/Xbootclasspath/Xbootclasspath:${crimsonpath}/;
-			    }
-			    if (!($line =~ /${ibmpath}/)) {
-				$line =~ s/Xbootclasspath/Xbootclasspath:${ibmpath}/;
-			    }
-			}
-			print JVMTMP $line;
-		    }
-		    close JVMTMP;
-		    close JVM;
-		    unlink("${fulljvm12}");
-		    rename("${fulljvm12tmp}", "${fulljvm12}");
-		}
-		open JVM, ">>  ${SERVERROOT}${PATH}${file}";
-		select JVM;
-		print STDERR "adding necessary entry to $file.\n";
-		print "jvm.option=-Duser.home=${SERVERROOT}{{SEP}}clients{{SEP}}dsmlgw";
-		close JVM;
-	    }
-	}
-    }
-}

ldap/admin/src/scripts/template-migrate50to51

@@ -1,2831 +0,0 @@
-#{{PERL-EXEC}}
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-#
-
-# enable the use of our bundled perldap with our bundled ldapsdk libraries
-# all of this nonsense can be omitted if the mozldapsdk and perldap are
-# installed in the operating system locations (e.g. /usr/lib /usr/lib/perl5)
-BEGIN {
-	my $sroot = "{{DS-ROOT}}";
-	push @INC, "$sroot/lib/perl/arch", "$sroot/lib/perl";
-	if ($ENV{LD_LIBRARY_PATH}) {
-		$ENV{LD_LIBRARY_PATH} .= ":";
-	}
-	$ENV{LD_LIBRARY_PATH} .= "$sroot/shared/lib";
-	# this is only needed for HP/ux PA-RISC, but it doesn't hurt other platforms
-	if ($ENV{SHLIB_PATH}) {
-		$ENV{SHLIB_PATH} .= ":";
-	}
-	$ENV{SHLIB_PATH} .= "$sroot/shared/lib";
-}
-# Migrate a 5.0 directory server to a 5.1 directory server
-
-#######################################################################################################
-# enable the use of Perldap functions
-require DynaLoader;
-
-use Getopt::Std;
-use Mozilla::LDAP::Conn;
-use Mozilla::LDAP::Entry;
-use Mozilla::LDAP::LDIF;
-use Mozilla::LDAP::Utils qw(:all);
-use Mozilla::LDAP::API qw(:api :ssl :apiv3 :constant); # Direct access to C API
-use Time::localtime;
-use File::Basename;
-use Class::Struct ; 
-
-#######################################################################################################
-
-sub usage {
-        print(STDERR "\nUsage: $0 -D rootdn { -w password | -w - | -j filename } -p port \n");
-	print(STDERR "       -o oldInstancePath -n newInstancePath [-t tracelevel] [-L logfile]\n");
-        print(STDERR "************** parameters in brackets are optionals, others are required **************\n");
-        print(STDERR " Opts: -D rootdn              - new 5.x Directory Manager\n");
-        print(STDERR "     : -w password            - new 5.x Directory Manager's password\n");
-        print(STDERR "     : -w -                   - Prompt for new 5.x Directory Manager's password\n");
-        print(STDERR "     : -j filename            - Read new 5.x Directory Manager's password from file\n");
-        print(STDERR "     : -p port                - new 5.x Directory Server port\n");
-        print(STDERR "     : -o oldInstancePath     - Path of the old instance to migrate \n");
-        print(STDERR "     : -n newInstancePath     - Path of the new 5.x instance\n");
-        print(STDERR "     : [-t tracelevel]        - specify the level of trace (0..3)\n");
-        print(STDERR "     : [-L logfile]           - specify the file to log the migration report \n");
-      }
-########################################################################################################
-
-BEGIN {
-  
-  require 'uname.lib' ;
-  $isNT = -d '\\';
-  $PATHSEP = $isNT ? "\\" : "/";
-  ${SEP} = $isNT ? ";" : ":" ; 
-  @INC = ( '.', '../../../admin/admin/bin');
-  grep { s@/@\\@g } @INC if $isNT;
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-  # NT needs quotes around some things unix doesn't
-  $quote = $isNT ? "\"" : "";
-
-  # If this variable is set, all file/directory creation will make sure the mode
-  # and ownership of the destination is the same as the source
-  $PRESERVE = 1 if (!$isNT);
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-    if ($isNT) {
-		$os = "WINNT";
-    } else {
-    	$os = &uname("-s");
-    }
-	if ($isNT) {
-		# we have to pass batch files directly to the NT command interpreter
-		$com_spec = $ENV{ComSpec};
-		if (!$com_spec) {
-			$com_spec = $ENV{COMSPEC};
-		}
-		if (!$com_spec || ! -f $com_spec) {
-			# find the first available command interpreter
-			foreach $drive (c..z) {
-				$com_spec = "$drive:\\winnt\\system32\\cmd.exe";
-				last if (-f $com_spec);
-				$com_spec = undef;
-			}
-			if (! $com_spec) {
-				# punt and pray
-				$com_spec = 'c:\winnt\system32\cmd.exe';
-			}
-		}
-	}
-    if ( $os eq "AIX" ) {
-		$dll_suffix = "_shr.a";
-    }	
-    elsif ( $os eq "HP-UX" ) {
-	$arch = &uname("-p");
-	if ( $arch eq "ia64" ) {
-		$dll_suffix = ".so";
-	} else {
-		$dll_suffix = ".sl";
-	}
-    }	
-    elsif ( $os eq "WINNT" ) {
-		$dll_suffix = ".dll";
-    }	
-    else {
-		$dll_suffix = ".so";
-    }	
-	$slapdExecName = $isNT ? 'slapd.exe' : 'ns-slapd';
-	select STDERR;
-	$| = 1;
-	select STDOUT;
-	$| = 1;
-}
-
-SWITCH: {
-	    if ($os eq "AIX") {
-		$LIB_PATH = "LIBPATH" ;
-		last SWITCH ;
-	    }
-	    if ($os eq "HP-UX") {
-		$LIB_PATH = "SHLIB_PATH" ;
-		last SWITCH ;
-	    }
-	    if ($isNT) {
-                $LIB_PATH = "PATH" ;
-	        last SWITCH ;
-            }
-            else {
-                $LIB_PATH = "LD_LIBRARY_PATH" ;
-	        last SWITCH ;
-            }
-       }  
-
-  # old parameters
-  ${oldDir}         = "" ;                
-  ${oldname}        = "" ;             
-  ${oldHome}        = "" ;   
-  ${oldConfDir}     = "" ;
-  ${oldlocaluser} ;
-  ${olduid} ;
-  ${oldgid} ;
-
-  # new parameters            
-  ${root}           = "{{DS-ROOT}}" ;               
-  ${type}           = "" ;               
-  ${newname}        = "" ; 
-  ${newport}        = "" ;                                     
-  ${rootDN}         = "" ;
-  ${rootpwd}        = "" ;
-  ${localhost}      = "" ;
-  ${LogFileReport}  = "" ;
-  ${newuid} ;
-  ${localuser} ;
-  ${newgid} ;
-  $NO_INPUT_USER     = 0  ; # by default user can give inputs during the migration process
-  ${curdir}          = getCwd();
-  ${slapdExecDir}    = "${root}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-  # in 5.1 the replica Id is setup to a static value
-  $replicaIdvalue = 65535;
-
-  # specify the level of trace
-  $TRACELEVEL=1;
-
-  $LDAP_SERVER_UNREACHABLE = 81;
-
-  # get input users
-  &getParameters() ;
-  ${oldDir}          = &normalizeDir("${oldDir}");
-  ${oldHome}         = "${oldDir}${PATHSEP}$type-$oldname" ;    
-  ${oldConfDir}      = "${oldHome}${PATHSEP}config${PATHSEP}" ;
-  ${oldSchemaDir}    = "${oldConfDir}schema${PATHSEP}";
-  ${oldDSEldif}      = "${oldConfDir}dse.ldif";        
-  ${serverHome}      = "${root}${PATHSEP}$type-$newname" ;
-  ${schemaDir}       = "$serverHome${PATHSEP}config${PATHSEP}schema${PATHSEP}";
-  ${DSEldif}         = "$serverHome${PATHSEP}config${PATHSEP}dse.ldif";
-  ${ldif_rep}        = "${oldConfDir}${PATHSEP}ldif${PATHSEP}" ; 
-  ${oldSlapdExecDir} = "${oldDir}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-  
-  open(LOGFILE, ">> $LogFileReport");
-
-  printTrace("\noldDir: $oldDir, oldHome: $oldHome, \noldConfDir: $oldConfDir, \nldif_rep: $ldif_rep, \nrootDN: $rootDN, \nPort: $newport, \nNewname: $newname\n",3);
-  printTrace("\nLIB_PATH: $LIB_PATH",4);
-
-  if (!(-d $serverHome)) {
-    printMsg("\n$serverHome doesn't exist\n");
-    exit(1);
-  }
-  if (!(-d $oldHome)) {
-    printMsg("\n$oldHome doesn't exist\n");
-    exit(1);
-  }
-
-
-%HashParametersName = ();
-
-# The following hash displays only general server parameters to migrate under cn=config
-%GeneralSrvParamToMigrate = (
-		       'nsslapd-accesscontrol'=> '\n',
-		       'nsslapd-errorlog-logging-enabled'=> '\n',
-		       'nsslapd-accesslog-logging-enabled'=> '\n',
-		       'nsslapd-auditlog-logging-enabled'=> '\n',
-		       'nsslapd-accesslog-level'=> '\n',
-		       'nsslapd-accesslog-logbuffering'=> '\n',
-		       'nsslapd-accesslog-logexpirationtime'=> '\n',
-		       'nsslapd-accesslog-logexpirationtimeunit'=> '\n',
-		       'nsslapd-accesslog-logmaxdiskspace'=> '\n',
-		       'nsslapd-accesslog-logminfreediskspace'=> '\n',
-		       'nsslapd-accesslog-logrotationtime'=> '\n',
-		       'nsslapd-accesslog-logrotationtimeunit'=> '\n',
-		       'nsslapd-accesslog-maxlogsize'=> '\n',
-		       'nsslapd-accesslog-maxLogsPerDir'=> '\n',
-		       'nsslapd-attribute-name-exceptions'=> '\n',
-		       'nsslapd-auditlog-logexpirationtime'=> '\n',
-		       'nsslapd-auditlog-logexpirationtimeunit'=> '\n',
-		       'nsslapd-auditlog-logmaxdiskspace'=> '\n',
-		       'nsslapd-auditlog-logminfreediskspace'=> '\n',
-		       'nsslapd-auditlog-logrotationtime'=> '\n',
-		       'nsslapd-auditlog-logrotationtimeunit'=> '\n',
-		       'nsslapd-auditlog-maxlogsize'=> '\n',
-		       'nsslapd-auditlog-maxLogsPerDir'=> '\n',
-		       'nsslapd-certmap-basedn'=> '\n',
-		       'nsslapd-ds4-compatible-schema'=> '\n',
-		       'nsslapd-enquote-sup-oc'=> '\n',
-		       'nsslapd-errorlog-level'=> '\n',
-		       'nsslapd-errorlog-logexpirationtime'=> '\n',
-		       'nsslapd-errorlog-logexpirationtimeunit'=> '\n',
-		       'nsslapd-errorlog-logmaxdiskspace'=> '\n',
-		       'nsslapd-errorlog-logminfreediskspace'=> '\n',
-		       'nsslapd-errorlog-logrotationtime'=> '\n',
-		       'nsslapd-errorlog-logrotationtimeunit'=> '\n',
-		       'nsslapd-errorlog-maxlogsize'=> '\n',
-		       'nsslapd-errorlog-maxlogsperdir'=> '\n',
-		       'nsslapd-groupevalnestlevel'=> '\n',
-		       'nsslapd-idletimeout'=> '\n',
-		       'nsslapd-ioblocktimeout'=> '\n',
-		       'nsslapd-lastmod'=> '\n',
-		       'nsslapd-listenhost'=> '\n',
-		       'nsslapd-maxdescriptors'=> '\n',
-		       'nsslapd-nagle'=> '\n',
-		       'nsslapd-readonly'=> '\n',
-		       'nsslapd-referralmode'=> '\n',
-		       'nsslapd-plugin-depends-on-name'=> '\n',
-		       'nsslapd-plugin-depends-on-type'=> '\n',
-		       'nsslapd-referral'=> '\n',
-		       'nsslapd-reservedescriptors'=> '\n',
-		       'nsslapd-rootpwstoragescheme'=> '\n',
-		       'nsslapd-schemacheck'=> '\n',
-		       'nsslapd-secureport'=> '\n',
-		       'nsslapd-security'=> '\n',
-		       'nsslapd-sizelimit'=> '\n',
-		       'nsslapd-ssl3ciphers'=> '\n',
-		       'nsslapd-timelimit'=> '\n',
-		       'passwordchange'=> '\n',
-		       'passwordchecksyntax'=> '\n',
-		       'passwordexp'=> '\n',
-		       'passwordhistory'=> '\n',
-		       'passwordinhistory'=> '\n',
-		       'passwordlockout'=> '\n',
-		       'passwordlockoutduration'=> '\n',
-		       'passwordmaxage'=> '\n',
-		       'passwordmaxfailure'=> '\n',
-		       'passwordminage'=> '\n',
-		       'passwordminlength'=> '\n',
-		       'passwordmustchange'=> '\n',
-		       'passwordresetfailurecount' => '\n',
-		       'passwordstoragescheme' => '\n',
-		       'passwordunlock' => '\n',
-		       'passwordwarning' => '\n'
-);
-
-# the following hash displays global parameters related to database stored under cn=config,cn=ldbm database,cn=plugins,cn=config
-%GlobalConfigLDBMparamToMigrate = (
-		       'nsslapd-allidsthreshold' => '\n',
-		       'nsslapd-lookthroughlimit' => '\n',
-		       'nsslapd-mode' => '\n',
-		       'nsslapd-dbcachesize' => '\n',
-		       'nsslapd-cache-autosize' => '\n',
-		       'nsslapd-cache-autosize-split' => '\n',
-		       'nsslapd-db-transaction-logging' => '\n',
-		       'nsslapd-import-cachesize' => '\n'
-);
-
-# the following hash displays specific parameters to each backends and  stored under cn=DBname,cn=ldbm database,cn=plugins,cn=config
-%LDBMparamToMigrate = (
-	               'nsslapd-cachesize' => '\n',
-		       'nsslapd-cachememsize' => '\n',
-		       'nsslapd-readonly' => '\n',
-		       'nsslapd-require-index' => '\n'
-);
-
-
-%ChainingConfigParams = (
-			 'nsactivechainingcomponents' => '\n',
-			 'nstransmittedcontrols' => '\n'
-			 );
-
-%ChainingDefaultInstanceConfigParams = (
-			 'nsabandonedsearchcheckinterval' => '\n',
-			 'nsbindconnectionslimit' => '\n',
-			 'nsbindtimeout' => '\n',
-			 'nsbindretrylimit' => '\n',
-			 'nshoplimit' => '\n',
-			 'nsmaxresponsedelay' => '\n',
-			 'nsmaxtestresponsedelay' => '\n',
-			 'nschecklocalaci' => '\n',
-			 'nsconcurrentbindlimit' => '\n',
-			 'nsconcurrentoperationslimit' => '\n',
-			 'nsconnectionlife' => '\n',
-			 'nsoperationconnectionslimit' => '\n',
-			 'nsproxiedauthorization' => '\n',
-			 'nsreferralonscopedsearch' => '\n',
-			 'nsslapd-sizelimit' => '\n',
-			 'nsslapd-timelimit' => '\n'
-);
-
-%changelog5params = (
-		     'nsslapd-changelogmaxage' => '\n',
-		     'nsslapd-changelogmaxentries' => '\n'
-		    );
-
-@SNMPparams = (
-	       'nssnmpenabled',
-	       'nssnmporganization', 
-	       'nssnmplocation',
-	       'nssnmpcontact',
-	       'nssnmpdescription',
-	       'nssnmpmasterhost',
-	       'nssnmpmasterport',
-	       'nssnmpenabled',
-	       'aci'
-	       );
-
-%stdIncludes = (
-		"."                        => "\n",
-		".."                       => "\n",
-		"30ns-common.ldif "        => "\n",
-		"50ns-mail.ldif "          => "\n",
-		"50ns-news.ldif"           => "\n",
-		"50iplanet-servicemgt.ldif"=> "\n",
-		"50ns-mcd-browser.ldif"    => "\n",
-		"50ns-proxy.ldif"          => "\n",
-		"00core.ldif"              => "\n",
-		"50ns-admin.ldif"          => "\n",
-		"50ns-mcd-config.ldif "    => "\n",
-		"50ns-value.ldif"          => "\n",
-		"05rfc2247.ldif"           => "\n",
-		"50ns-calendar.ldif"       => "\n",
-		"50ns-mcd-li.ldif"         => "\n",
-		"50ns-wcal.ldif"           => "\n",
-		"05rfc2927.ldif"           => "\n",
-		"50ns-certificate.ldif"    => "\n", 
-		"50ns-mcd-mail.ldif"       => "\n", 
-		"50ns-web.ldif"            => "\n",
-		"10rfc2307.ldif"           => "\n",
-		"50ns-compass.ldif"        => "\n",
-		"50ns-media.ldif"          => "\n", 
-		"20subscriber.ldif"        => "\n",
-		"50ns-delegated-admin.ldif"=> "\n", 
-		"50ns-mlm.ldif"            => "\n",
-		"25java-object.ldif"       => "\n",
-		"50ns-directory.ldif"      => "\n", 
-		"50ns-msg.ldif"            => "\n",
-		"28pilot.ldif"             => "\n",
-		"50ns-legacy.ldif"         => "\n", 
-		"50ns-netshare.ldif"       => "\n"
-);
-
-
-# Backends migrated (Backend CN attribute value)
-@BACKENDS    = () ; 
-# All pairs of suffix-backend are registered in this hashtable
-%oldBackends = () ;
-
-#store the backend instances to migrate
-@LDBM_backend_instances = ();
-
-#store the mapping tree
-@Mapping_tree_entries = ();
-
-#store the suffix and the associated chaining backend
-%oldChainingBackends = ();
-
-#store the multiplexor bind entries to migrate
-%MultiplexorBindDNEntriesToMigrate = ();
-
-#store the Replica bind DN entries to migrate
-%ReplicaBindDNEntriesToMigrate = ();
-
-# list of standard plugin's in version 4
-%stdPlugins = (
-	"7-bit check"                         =>        "\n",
-	"acl plugin"                          =>        "\n",
-	"acl preoperation"                    =>        "\n",
-	"binary syntax"                       =>        "\n",     
-	"case exact string syntax"            =>        "\n",
-	"case ignore string syntax"           =>        "\n",
-	"chaining database"                   =>        "\n",
-        "class of service"                    =>        "\n",
-        "country string syntax"               =>        "\n",
-	"distinguished name syntax"           =>        "\n",
-        "generalized time syntax"             =>        "\n",
-        "integer syntax"                      =>        "\n",
-        "internationalization plugin"         =>        "\n",
-        "ldbm database"                       =>        "\n",
-        "legacy replication plugin"           =>        "\n",
-        "multimaster replication plugin"      =>        "\n",
-        "octet string syntax"                 =>        "\n",
-        "clear"                               =>        "\n",
-        "crypt"                               =>        "\n",
-        "ns-mta-md5"                          =>        "\n",
-        "sha"                                 =>        "\n",
-        "ssha"                                =>        "\n",
-        "postal address syntax"               =>        "\n",
-        "referential integrity postoperation" =>        "\n",
-        "retro changelog plugin"              =>        "\n",
-        "roles plugin"                        =>        "\n",
-        "telephone syntax"                    =>        "\n",
-        "uid uniqueness"                      =>        "\n",
-        "uri syntax"                          =>        "\n"
-	      );
-
-# list of indexes that have disappeared from the 5.1 schema compared to 5.0
-%deniedIndexes = (
-	'dncomp' => "\n"
-);
-
-@default_indexes = ();
-@indexes = ();
-
-# list of user added Plugin's. In 5.x, they 'll need to be recompiled
-@badPlugins = () ;
-
-@pluginAttrs = (	  
-	       "objectclass",
-	       "cn",
-	       "nsslapd-pluginpath",
-	       "nsslapd-plugininitfunc",
-	       "nsslapd-plugintype",
-	       "nsslapd-pluginenabled",
-	       "nsslapd-plugin-depends-on-type",
-	       "nsslapd-pluginid",
-	       "nsslapd-pluginversion",
-	       "nsslapd-pluginvendor"
-	       );
-
-@nsds5replicaAttrs = (
-		      'objectclass',
-		      'nsDS5ReplicaRoot',
-		      'nsDS5ReplicaType',
-		      'nsDS5ReplicaLegacyConsumer',
-		      'nsDS5flags',
-		      'nsDS5ReplicaId',
-		      'nsDS5ReplicaPurgeDelay',
-		      'nsDS5ReplicaBinddn',
-		      'cn',
-		      'nsDS5ReplicaReferral'
-		      );
-
-# array of replicas to migrate
-@new51replicas = ();
-
-# array of replication agreements to migrate
-@replicationAgreements = ();
-
-# Shutdown the legacy Directory instance
-printTrace("\nShutdown the legacy Directory Server instance: ${oldHome}",0);
-&stopServer($oldDir, 'slapd-'.$oldname);
-
-# compare LDIF standard config files with standard ones
-CompareStdConfigFiles() ;
-die "\n\n The version of product you want to migrate is not a 5.x iPlanet Directory Server\n" unless ($oldVersion == 5) ;
-
-# get the hostname of the new LDAP server
-my $LDAPservername = &getLDAPservername();
-
-# get the uid and gid of the 5.1 slapd user
-($localuser, $newuid, $newgid)    = getuid_gid();
-# get the uid and gid of the 5.0 slapd user
-($oldlocaluser, $olduid, $oldgid) = getolduid_gid();
-printTrace("\n5.1 localuser: $localuser, uid: $newuid, gid: $newgid",2);
-printTrace("\n5.0 localuser: $oldlocaluser, uid: $olduid, gid: $oldgid",2);
-
-# backup 5.1 configuration files in <root_server51>/slapd-instancename/config
-printTrace("\nBackup $serverHome${PATHSEP}config on $serverHome${PATHSEP}config_backup ...",0);
-&backupConfigFiles();
-
-# migrate the schema (need to stop and start the 5.1 server)
-printTrace("\nMigrate the schema...",0);
-MigrateSchema();
-
-# start the server unless it is already started
-&startServer() unless (isDirectoryAlive());
-
-###############  Connect to the 5.1 LDAP Directory Server  ######################
-$ENV{"$LIB_PATH"} = "$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"} ;
-
-die "\n Migration aborted. Check your 5.0 and 5.1 iPlanet Directory Server are installed on the same machine \n" if ( $LDAPservername == -1 );
-$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-
-# Cconnection to 5.1 LDAP server is successful !
-printTrace("\nConnected to $Version.$Minor LDAP server",0) ;
-
-# Parse the main configuration file: dse.ldif
-printTrace("\n\nParse the old DSE ldif file: $oldDSEldif  *****",0, 1);
-printTrace("\nThis may take a while ...\n",0);
-&MigrateDSEldif();
-
-#migrate LDBM backend instances
-printTrace("\n\nMigrate LDBM backend instances...",0,1);
-&migrateLDBM_backend_instances();
-
-#migrate mapping tree entries
-printTrace("\n\nMigrate mapping tree...",0,1);
-&migrateMappingTree();
-
-#migrate default indexes
-printTrace("\n\nMigrate default indexes...",0,1);
-migrateDefaultIndexes();
-
-#migrate indexes
-printTrace("\n\nMigrate indexes...",0,1);
-migrateIndexes();
-
-#migrate replicas
-printTrace("\n\nMigrate replicas...",0,1);
-&MigrateNSDS5_replica();
-
-#migrate replication agreements
-printTrace("\n\nMigrate replication agreements...",0,1);
-&MigrateNSDS_replication_agreement();
-
-#migrate key/cert databases
-printTrace("\n\nMigrate key/cert databases...",0,1);
-&MigrateSSL(); 
-
-# migrate certmap.conf
-printTrace("\n\nMigrate Certmap.conf...",0,1);
-&MigrateCertmap() ;
-
-##################   Close the connection to 5.1 LDAP Server   #####################
-printTrace("\n\n***** Close the LDAP connection to the 5.1 Directory Server instance ***** ",0);
-$conn->close;
-
-
-################## stop the 5.x instance and Export/Import the data, restart the server ##################
-if (@BACKENDS) {
-  &stopServer($root,'slapd-'.$newname);
-  printTrace("\nData processing...\n",0,1) ;
-  # migrate data for each backend: 5.0 -> LDIF files
-  &manydb2Ldif($ldif_rep);
-  
-  # migrate LDIF data to the 5.1 database: LDIF -> 5.1
-  &manyLdif2db($ldif_rep);
-  printTrace("\n***** Migrate ReplicaBindDN entries...\n",0,1);
-  &importReplicaBindDNEntries();
-  printTrace("\n***** Migrate MultiplexorBindDN entries...\n",0,1);
-  &importMultiplexorBindDNEntries();
-  &startServer() unless (isDirectoryAlive());
-}
-else {
-  printTrace("\nINFORMATION - There are no 5.0 non-standard or non-already existing suffixes to migrate\n",0);
-  printTrace("\n***** Migrate ReplicaBindDN entries...\n",0,1);
-  &importReplicaBindDNEntries();
-  printTrace("\n***** Migrate MultiplexorBindDN entries...\n",0,1);
-  &importMultiplexorBindDNEntries();
-}
-
-printMsg("\n\n  ******   End of migration   ******\n\n");
-
-close(LOGFILE);
-
-
-###########################################################################################
-# get input users
-sub getParameters {
-  my $exit = 0 ;
-  my $i    = 0;
-  my $pwdfile= "";
-
-  while ($i <= $#ARGV) {
-    if ( "$ARGV[$i]" eq "-D" ) { # directory manager
-      if (! $rootDN) {
-	$rootDN = $ARGV[++$i] ;
-      }
-      else {
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-w") { # password
-      if (! $rootpwd) {
-	$rootpwd = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-j") { # password file 
-      if (! $pwdfile) {
-	$pwdfile = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-o") { # 4.x instance path
-       if (! $oldHome ) {
-	 $oldHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $oldHome if $isNT ;
-	 if ($oldHome =~ /[\"]?(.*)?[\"]?/) { $oldHome = $1 ; }
-	 if ($oldHome =~ m@^(.*)/([^-/]*)-([^/]*)[/]?$@) {
-	   $oldDir  = $1 ;
-	   $type    = $2 ;
-	   $oldname = $3 ;
-	   if ($isNT) {
-	     $oldDir  = lc($oldDir)     ;
-	     $type    = lc($type)       ;
-	     $oldname = lc($oldname)    ;
-	     $oldHome = lc($oldHome)    ;
-	     grep { s@/@\\@g } $oldDir  ;
-	     grep { s@/@\\@g } $oldHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe old instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-n") { # 5.x instance path
-       if (! $serverHome ) {
-	 $serverHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $root if $isNT ;
-	 grep { s@\\@/@g } $serverHome if $isNT ;
-	 if ($serverHome =~ /[\"]?(.*)?[\"]?/) { $serverHome = $1 ; }
-	 if ($serverHome =~ m@^(.*?)/?([^/-]*)-([^/]*)[/]?$@) {
-	   $root    = $1 if ($1);
-	   $type    = $2 ;
-	   $newname = $3 ;
-	   if ($isNT) {
-	     $root       = lc($root)       ;
-	     $type       = lc($type)       ;
-	     $newname    = lc($newname)    ;
-	     $serverHome = lc($serverHome) ;
-	     grep { s@/@\\@g } $root       ;
-	     grep { s@/@\\@g } $serverHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe 5.x instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-p") { # 5.x DS port 
-      if (! $newport ) {
-	$newport = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-t") { # TRACELEVEL
-      my $value = $ARGV[++$i] ;	
-      if ($value =~ /[0-3]/) {
-	$TRACELEVEL = $value ;
-      }
-      else {
-	print("\nThe tracelevel must belong to 0..3 interval");
-        &usage();
-	exit();
-      }	
-    } elsif ("$ARGV[$i]" eq "-noinput") { # no user interventions during processing
-	$NO_INPUT_USER = 1 ;
-    } elsif ("$ARGV[$i]" eq "-L") { # migration logfile
-	$LogFileReport = $ARGV[++$i] ;
-    }
-    else {
-	print("\nThe option $ARGV[$i] is not recognized");
-	&usage() ;
-	exit(1);
-    }
-    $i++;
-  }
-  if (! $rootDN) {
-    print("\nThe rootDN is missing");
-    $exit = 1;
-  }
-  if ($pwdfile ne "") {
-    # Open file and get the password
-    unless (open (RPASS, $pwfile)) {
-      die "Error, cannot open password file $passwdfile\n";
-    }
-    $rootpwd = <RPASS>;
-    chomp($rootpwd);
-    close(RPASS);
-  } elsif ($rootpwd eq "-"){
-    # Read the password from terminal
-    die "The '-w -' option requires an extension library (Term::ReadKey) which is not\n",
-    "part of the standard perl distribution. If you want to use it, you must\n",
-    "download and install the module. You can find it at\n",
-    "http://www.perl.com/CPAN/CPAN.html\n";
-    # Remove the previous line and uncomment the following 6 lines once you have installed Term::ReadKey module.
-# use Term::ReadKey; 
-#	print "Bind Password: ";
-#	ReadMode('noecho'); 
-#	$rootpwd = ReadLine(0); 
-#	chomp($rootpwd);
-#	ReadMode('normal');
-  }
-  if (! $rootpwd) {
-    print("\nThe rootpwd is missing");
-    $exit = 1 ;
-  }
-  if (! $newport) {
-    print("\nThe port is missing");
-    $exit = 1;
-  }
-  if (! $serverHome) {
-    print("\nThe new instance path is missing");
-    $exit = 1;
-  }
-  if (! $oldHome) {
-    print("\nThe old instance path is missing");
-    $exit = 1;
-  }
-  if ((! $LogFileReport) && $serverHome) {
-    ($sec, $min, $hour, $dd, $mm, $yy) = &GetTime();
-    $LogFileReport  = "${serverHome}${PATHSEP}logs${PATHSEP}Migration_${dd}${mm}${yy}_${hour}${min}${sec}.log";
-  }
-  if ($exit) {	
-	&usage() ;
-	exit(1);
-  }
-  
-}
-
-###################################################################################################
-
-sub MigrateSchema{
-  my $FilesChanged = "";
-  my $AllDiffs     = "";
-  my $NoChanges    = "" ;
-  my $lineToBegin  = 0 ;
-  opendir(SCHEMADIR, $oldSchemaDir) or
-    die "Error: could not open migrated config dir $oldSchemaDir: $!";
-  
-  foreach $file (readdir(SCHEMADIR)) {
-      if (! exists($stdIncludes{lc($file)})) {
-	  my $new51file = $schemaDir . $file;
-	  if (-f $new51file ) {
-	      # The ldif file already exists. Make a diff and warn the user if different.
-	      if (diff($new51file, $oldSchemaDir.$file)) {
-		  &stopServer($root,'slapd-'.$newname) if (isDirectoryAlive());
-		  $AllDiffs .= "\n$file";
-		  copyBinFile("$oldSchemaDir$file", $new51file);
-	      }
-	  }
-	  else {
-	      &stopServer($root,'slapd-'.$newname) if (isDirectoryAlive());
-	      $AllDiffs .= "\n$file";
-	      copyBinFile("$oldSchemaDir$file", $new51file);
-	  }
-      }
-  }
-  closedir(SCHEMADIR);
-  if ($AllDiffs) {
-      printMsg("\n\n***********************************************************************");
-      printMsg("\nThe following LDIF files have been migrated:");
-      printMsg("$AllDiffs");
-      printMsg("\n*************************************************************************\n\n");
-  } 
-  &startServer() if (! isDirectoryAlive());
-}
-
-
-###################################################################################################
-# This subroutine is used to parse the dse.ldif file and call specific routines to act with entries
-sub MigrateDSEldif {
-  printTrace("\nMigrate DSE entries...",1);
-  my $tempoAlreadyDone = 0;
-  open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-  my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-   while ($entry = readOneEntry $in) {
-     $typeOfEntry = getTypeOfEntry($entry);
-     SWITCH: {
-	 if ($typeOfEntry eq "LDBM_BACKEND_INSTANCE"){
-	     parseLDBM_backend_instance($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "MAPPING_TREE"){
-	     parseMapping_tree($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "DEFAULT_INDEX"){
-	     parseDefaultIndex($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "INDEX"){
-	     parseIndex($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "STANDARD_PLUGIN"){
-	     migrateStdPlugin($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CONFIG_NODE"){
-	     migrateConfig_Node($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CONFIG_LDBM_DATABASE"){
-	     migrateConfig_LDBM_database($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CHAINING_BACKEND_CONFIG"){
-	     migrateChainingBE_config($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CHAINING_BACKEND_INSTANCE"){
-	     migrateChainingBE_instance($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "NSDS5_REPLICA"){
-	     parseNSDS5_replica($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "NSDS_REPLICATION_AGREEMENT"){
-	     parseNSDS_replication_agreement($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CHANGELOG5"){
-	     migrateChangelog5($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "REPLICATION"){
-	     migrateReplication($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "SECURITY"){
-	     migrateSecurity($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "SNMP"){
-	     migrateSNMP($entry);
-	     last SWITCH;
-	 }
-     }
-
-   }
-   close(DSELDIF);
-}
-
-#############################################################################
-# returns the "type of an entry". If the entry is not to be migrated its type is "NOT_MIGRATED_TYPE"
-
-sub getTypeOfEntry{
-    my $entry = shift;
-    my $DN = $entry->getDN(1) ; # 1 is to normalize the returned DN 
-    if (($DN =~ /cn=ldbm database,cn=plugins,cn=config$/i) && (isObjectclass($entry,"nsBackendInstance"))) {
-	return "LDBM_BACKEND_INSTANCE";
-    }
-    if (($DN =~ /cn=mapping tree,cn=config$/i) && (isObjectclass($entry,"nsMappingTree"))) {
-	return "MAPPING_TREE";
-    }
-    if (($DN =~ /cn=default indexes,cn=config,cn=ldbm database,cn=plugins,cn=config$/i) && (isObjectclass($entry,"nsIndex"))) {
-        return "DEFAULT_INDEX";
-    }
-    if (isObjectclass($entry,"nsIndex")) {
-        return "INDEX";
-    }
-    if ((isObjectclass($entry,"nsSlapdPlugin")) && (isStdPlugin($entry))) {
-        return "STANDARD_PLUGIN";
-    }
-    if ($DN =~ /^cn=config$/i) {
-        return "CONFIG_NODE";
-    }
-    if ($DN =~ /^cn=config,cn=ldbm database,cn=plugins,cn=config$/i) {
-        return "CONFIG_LDBM_DATABASE";
-    }
-    if (($DN =~ /^cn=config,cn=chaining database,cn=plugins,cn=config$/i) || ($DN =~ /^cn=default instance config,cn=chaining database,cn=plugins,cn=config$/i)){
-        return "CHAINING_BACKEND_CONFIG";
-    }	   
-    if (($DN =~ /cn=chaining database,cn=plugins,cn=config$/i) && (isObjectclass($entry,"nsBackendInstance"))) {
-        return "CHAINING_BACKEND_INSTANCE";
-    } 
-    if (isObjectclass($entry,"nsDS5Replica")) {
-        return "NSDS5_REPLICA";
-    }
-    if (isObjectclass($entry,"nsDS5ReplicationAgreement")) {
-        return "NSDS_REPLICATION_AGREEMENT";
-    }
-    if ($DN =~ /^cn=changelog5,cn=config$/i) {
-        return "CHANGELOG5";
-    }
-    if (($DN =~ /cn=replication,cn=config$/i) && ($DN !~ /^cn=replication,cn=config$/i)) {
-        return "REPLICATION";
-    }
-    if ($DN =~ /cn=encryption,cn=config$/i) {
-        return "SECURITY";
-    }
-    if ($DN =~ /^cn=SNMP,cn=config$/i) {
-        return "SNMP";
-    }
-    return "NOT_MIGRATED_TYPE";
-}
-
-#############################################################################
-
-
-
-#############################################################################
-# returns 1 if the objectclass given in parameter is present in the objectclasses values of the entry 
-# given in parameter, 0 else
-
-sub isObjectclass {
-    my $entry       = shift;
-    my $objectclass = shift;
-    return ($entry->hasValue("objectclass",$objectclass,1));
-}
-
-#############################################################################
-
-sub isStdPlugin {
-    my $entry = shift;
-    my $CN    = $entry->{cn}[0];
-    if (isObjectclass($entry,"nsSlapdPlugin")) {
-	return 1 if ($stdPlugins{lc($CN)});
-    }
-    return 0;
-}
-
-
-#############################################################################
-
-sub alreadyExistsIn51{
-    my $entry     = shift;
-    my $mustExist = shift;
-    my $DN    = $entry->getDN(1); # 1 to normalize the DN
-    return searchEntry($DN, $mustExist);
-}
-
-#############################################################################
-sub searchEntry {
-    my $DN          = shift;
-    my $mustExist   = shift;
-    my $res         = $conn->search($DN, "base", "objectclass=*");
-    my $cpt         = 5;
-    if ($res) {
-	return $res;
-    }
-    else {
-	my $errorCode = $conn->getErrorCode();
-	while (($errorCode eq $LDAP_SERVER_UNREACHABLE) && cpt && (! $res)) {
-	    printMsg("\ntry to reconnect to search $DN");
-	    $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	    $res  = $conn->search($DN, "base", "objectclass=*");
-	    $errorCode = $conn->getErrorCode();	 
-	    $cpt--;
-	}
-	if ($res){
-	    return $res ;   
-	}
-	elsif (($errorCode eq $LDAP_SERVER_UNREACHABLE) || ($mustExist)) {  
-	    my $msg = $conn->getErrorString();
-	    printMsg("\n\n*** Failed to search: $DN");
-	    printMsg("\n*** Error Msg: $msg, Error code: $errorCode");
-	}
-	return 0;
-    }
-}
-
-
-#############################################################################
-
-sub addEntryTo51{
-    my $entry          = shift;
-    my $typeOfEntry = shift;
-    my $trace          = shift;
-    my $res            = $conn->add($entry);
-    my $DN             = $entry->getDN(1);
-    my $cpt            = 5;
-    if ($res) {
-	printTrace("\n$typeOfEntry - Add successfull: $DN",$trace);
-	return 1;
-    }
-    else {
-	my $errorCode = $conn->getErrorCode();
-	while (($errorCode eq $LDAP_SERVER_UNREACHABLE) && cpt && (! $res)) {
-	    printMsg("\ntry to reconnect to add $DN");
-	    $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	    $res  = $conn->add($entry);
-	    $errorCode = $conn->getErrorCode();	 
-	    $cpt--;
-	}
-	if ($res){
-	    printTrace("\n$typeOfEntry - Add successfull: $DN",$trace);
-	    return 1;   
-	}
-	else {  
-	    my $msg = $conn->getErrorString();
-	    printMsg("\n\n*** $typeOfEntry: Add Failed: $DN");
-	    printMsg("\n*** Error Msg: $msg, Error code: $errorCode");
-	    return 0;
-	}
-    }
-}
-
-#############################################################################
-
-sub updateEntry{
-    my $entry       = shift;
-    my $typeOfEntry = shift;
-    my $CHECK       = shift;
-    my $trace       = shift;
-    my $cpt         = 5;
-    if ($CHECK) {
-	if (! hasChanged($entry, $typeOfEntry)) {
-	    return 1;
-	}
-    }
-    my $res = $conn->update($entry);
-    my $DN  = $entry->getDN(1);
-    if ($res) {
-	printTrace("\n$typeOfEntry - Update successfull: $DN",$trace);
-	return 1 ;
-    }
-    else {
-	my $errorCode = $conn->getErrorCode();
-	while (($errorCode eq $LDAP_SERVER_UNREACHABLE) && cpt && (! $res)) {
-	    printMsg("\ntry to reconnect to update $DN");
-	    $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	    $res  = $conn->update($entry);
-	    $errorCode = $conn->getErrorCode();	 
-	    $cpt--;
-	}
-	if ($res){
-	    printTrace("\n$typeOfEntry - Update successfull: $DN",$trace);
-	    return 1;   
-	}
-	else {  
-	    my $msg = $conn->getErrorString();
-	    printMsg("\n\n*** $typeOfEntry - Update Failed: $DN");
-	    printMsg("\n*** Error Msg: $msg, Error code: $errorCode");
-	    return 0;
-	}
-    }
-}
-	
-
-#############################################################################
-# returns 1 if the entry to migrate and the current entry are different one another
-
-sub hasChanged {
-    my $entry       = shift;
-    my $typeOfEntry = shift;
-    my $DN          = $entry->getDN(1);
-    my $new51entry  = searchEntry($DN,1);
-    return 1 if (! $new51entry); # we shoudn't be in that case ...
-    # do the stuff to check wether the entry has changed or not given its type
-    if (($typeOfEntry eq "DEFAULT_INDEX") || ($typeOfEntry eq "INDEX")){
-	my @indexTypes           = $entry->getValues("nsIndexType");
-	my @new51indexTypes      = $new51entry->getValues("nsIndexType");
-	my @nsmatchingrules      = $entry->getValues("nsmatchingrule");
-	my @new51nsmatchingrules = $new51entry->getValues("nsmatchingrule");
-	return 1 if (Diffs(\@indexTypes, \@new51indexTypes));
-	return 1 if (Diffs(\@nsmatchingrules,\@new51nsmatchingrules));
-	return 0;
-    }
-    if ($typeOfEntry eq "CHANGELOG5"){
-	printTrace("\nCheck wether changelog has changed or not",3);
-	my @params = keys(%changelog5params);
-	foreach $param (@params){
-	    my @values      = $entry->getValues($param);
-	    my @new51values = $new51entry->getValues($param);
-	    return 1 if (Diffs(\@values,\@new51values));   
-	}
-	return 0;
-    }
-    if ($typeOfEntry eq "SNMP"){
-	foreach $param (@SNMPparams){
-	    my @values      = $entry->getValues($param);
-	    my @new51values = $new51entry->getValues($param);
-	    return 1 if (Diffs(\@values,\@new51values));   
-	}
-	return 0;
-    }
-    # we don't know how to compare such type of entry => just return 1
-    return 1 ;
-}
-
-sub isAsystemIndex {
-    my $index = shift;
-    return ($index->hasValue("nsSystemIndex","true",1));
-}
-
-
-sub updatePathInPluginArgs {
-    my $plugin       = shift;
-    my $argNum       = 0;
-    my $argPrefix    = "nsslapd-pluginarg";
-    my $cont         = 1;
-    my $Unix_oldDir  = ${oldDir} ;
-    my $Unix_root    = ${root} ;
-    grep { s@\\@/@g } $Unix_oldDir if $isNT;
-    grep { s@\\@/@g } $Unix_root   if $isNT;
-    while ($cont) {
-	my $arg = $argPrefix . $argNum ;
-	if ($plugin->exists($arg)) {
-	    $_ = $plugin->{$arg}[0] ;
-	    s@$Unix_oldDir@$Unix_root@ig ;
-	    s/$type-$oldname/$type-$newname/ig ;
-	    $plugin->setValues($arg, $_) ;
-	}
-	else {
-	    $cont = 0 ;
-	}
-	$argNum++;
-    }
-    return $plugin;
-} 
-
-
-sub Diffs {
-    my $valuesToMigrate = shift;
-    my $currentValues   = shift;
-    return 1 if (getDiff(\@{$valuesToMigrate},\@{$currentValues}));
-    return 1 if (getDiff(\@{$currentValues},\@{$valuesToMigrate}));
-    return 0 ;
-}
-
-sub getDiff {
-    # we get references to arrays
-    my $elements = shift ; 
-    my $existing_elements = shift ;
-    my %count   = () ;
-    my %countEE = () ;
-    @diff       = () ;
-    foreach $e (@{$elements}, @{$existing_elements}) { $count{$e}++ ;}
-    foreach $e (@{existing_elements}) { $countEE{$e}++ ;}
-    foreach $e (@{$elements}) {
-	# if $e is only present in @$elements, we push it to the diff array
-	if (($count{$e} == 1) && ($countEE{$e} == 0)) {
-	    push @diff, $e ;
-	}
-    }
-    return @diff ;
-}
-
-sub registerSuffix_Backend {
-    my $ldbmDatabase      = shift;
-    my $CN                = $ldbmDatabase->{cn}[0];
-    my $suffixArg         = "nsslapd-suffix";
-    my $suffix            = $ldbmDatabase->{$suffixArg}[0];
-    $oldBackends{$suffix} = $CN;
-}
-
-
-#############################################################################
-#                                                                           #
-#                                                                           #
-#                                                                           #
-#############################################################################
-sub migrateLDBM_backend_instances {
-    foreach $entry (@LDBM_backend_instances) {
-	my $DN    = $entry->getDN(1); # 1 is to normalize the DN
-	my $CN    = $entry->{cn}[0];
-	if ($DN =~/cn=netscaperoot,cn=ldbm database/i){
-	    printTrace("\n\n*** INFORMATION - NetscapeRoot is NOT migrated",0);
-	}
-	else {
-	    if(alreadyExistsIn51($entry)){
-		printMsg("\n\n*** LDBM_BACKEND_INSTANCE - $DN already exists");
-		printMsg("\n*** Migration will not update it");
-	    }
-	    else {
-		printTrace("\nWe should add the backend instance $DN",3);
-		my $suffixarg = "nsslapd-suffix" ;
-		my $suffixname= $entry->{$suffixarg}[0] ;
-		my $new51entry = $conn->newEntry() ;
-		$new51entry->setDN($DN);
-		$new51entry->setValues("objectclass", "top", "extensibleObject", "nsBackendInstance" );
-		$new51entry->setValues("cn", $CN );
-		$new51entry->setValues($suffixarg, $suffixname);
-		my @params = keys(%LDBMparamToMigrate);
-		foreach $param (@params) {
-		    my @values = $entry->getValues($param);
-		    $new51entry->setValues($param, @values) if (@values);
-		}
-		if (addEntryTo51($new51entry,  "LDBM_BACKEND_INSTANCE",1)) {
-		    push @BACKENDS, $CN;
-		}
-	    }
-	}       
-    }
-}
-
-sub parseLDBM_backend_instance {
-    my $entry = shift;
-    &registerSuffix_Backend($entry);
-    push @LDBM_backend_instances, $entry;
-}
-
-#############################################################################
-sub migrateMappingTree {
-    foreach $entry (@Mapping_tree_entries) {
-	my $DN    = $entry->getDN(1); # 1 si to normalize the DN
-	if ($DN =~/cn=\"o=netscaperoot\",cn=mapping tree,cn=config/i){
-	    # DO NOTHING
-	}
-	else {
-	    if(alreadyExistsIn51($entry)){
-		printMsg("\n\n*** MAPPING_TREE - $DN already exists");
-		printMsg("\n*** Migration will not update it");
-	    }
-	    else {
-		addEntryTo51($entry, "MAPPING_TREE",1);
-	    }
-	}
-    }
-}
-
-	    
-sub parseMapping_tree{
-    my $entry = shift;
-    push @Mapping_tree_entries, $entry;
-}
-
-#############################################################################
-sub migrateDefaultIndexes {
-    foreach $index (@default_indexes) {
-	my $CN    = $index->{cn}[0];
-	my $new51index ;
-	if ((! isAsystemIndex($index)) && (! $deniedIndexes{lc($CN)})) {
-	    if ($new51index = alreadyExistsIn51($index)) {
-		if (! isAsystemIndex($new51index)) {
-		    updateEntry($index, "DEFAULT_INDEX", 1, 2);
-		}
-	    }
-	    else {
-		addEntryTo51($index, "DEFAULT_INDEX", 2);
-	    }
-	}
-    }
-}
-
-
-sub parseDefaultIndex{
-    my $index = shift;
-    push @default_indexes, $index;
-}
-
-#############################################################################
-
-sub migrateIndexes {
-    foreach $index (@indexes) {
-	my $CN    = $index->{cn}[0];
-	my $new51index;
-	if ((! isAsystemIndex($index)) && (! $deniedIndexes{lc($CN)}) && (DN !~ /cn=netscaperoot,cn=index/i)){
-	    if ($new51index = alreadyExistsIn51($index)) {
-		if (! isAsystemIndex($new51index)) {
-		    updateEntry($index, "INDEX", 1, 2);
-		}
-	    }
-	    else {
-		addEntryTo51($index, "INDEX", 2);
-	    }
-	}
-    }
-}
-
-sub parseIndex{
-    my $index = shift;
-    push @indexes, $index;
-}
-
-#############################################################################
-
-sub newLDIFplugin {
-    my $current51plugin = shift;
-    my $DN              = $current51plugin->getDN(1);
-    my $new51plugin     = $conn->newEntry() ;
-    $new51plugin->setDN($DN);
-    foreach $Attr (@pluginAttrs) {
-    	my @values = $current51plugin->getValues($Attr);
-       	$new51plugin->setValues($Attr, @values) if (@values);
-    }
-    return $new51plugin;
-}
-
-sub migrateStdPlugin{
-    my $plugin           = shift;
-    my $DN               = $plugin->getDN(1);
-    my $pluginEnable     = "nsslapd-pluginEnabled";
-    my $argNum           = 0;
-    my $argPrefix        = "nsslapd-pluginarg";
-    my $current51plugin ;
-    if ($current51plugin = alreadyExistsIn51($plugin, 1)) {
-	$plugin                 = updatePathInPluginArgs($plugin);
-	my $pluginEnableValue   = $plugin->{$pluginEnable}[0];
-	my $cont                = 1;
-	my $pluginHasChanged    = 0;
-	my $new51plugin         = &newLDIFplugin($current51plugin);
-	if (! $current51plugin->hasValue($pluginEnable,$pluginEnableValue,1)){
-	    $new51plugin->setValues($pluginEnable, $pluginEnableValue);
-	    $pluginHasChanged = 1 unless ($pluginHasChanged);
-	}
-	while($cont){
-	     my $arg = $argPrefix . $argNum ;
-	     if ($plugin->exists($arg)) {
-		 my @values = $plugin->getValues($arg);
-		 my $value  = $values[0] ;
-		 $new51plugin->setValues($arg, $value) if (@values);
-		 if ($current51plugin->exists($arg)) {
-		     if (! $current51plugin->hasValue($arg,$value,1)) {
-			 $pluginHasChanged = 1 unless ($pluginHasChanged);
-		     }
-		 }
-		 else {
-		     $pluginHasChanged = 1 unless ($pluginHasChanged);
-		 }
-	     }
-	     else {
-		 if ($current51plugin->exists($arg)) {
-		     # Just Warn the user. Do nothing. 
-		     printTrace("\nCompared to 5.0, the current 5.1 plugin $DN belongs this attribute: $arg",2);
-		 }
-		 else {
-		     $cont = 0 ;
-		 }
-	     }
-	     $argNum++;
-	}
-	updateEntry($new51plugin, "STANDARD_PLUGIN", 0, 1) if ($pluginHasChanged);
-    }
-}
-
-#############################################################################
-	
-sub migrateConfig_Node{
-    my $config_node = shift;
-    my @params      = keys(%GeneralSrvParamToMigrate);
-    my $hasChanged  = 0;  
-    my $new51config_node;
-    if ($new51config_node = alreadyExistsIn51($config_node, 1)){	
-	foreach $param (@params) {
-	    if ($config_node->exists($param)){
-		my @valuesToMigrate = $config_node->getValues($param);
-		if (@valuesToMigrate){
-		    if ($new51config_node->exists($param)){
-			my @currentValues   = $new51config_node->getValues($param); 
-			if (Diffs(\@valuesToMigrate, \@currentValues)) {
-			    $new51config_node->setValues($param, @valuesToMigrate);
-			    $hasChanged = 1 unless ($hasChanged);
-			    printTrace("\nParam to update: $param with value @valuesToMigrate",3);
-			}
-		    }
-		    else {
-			$new51config_node->setValues($param, @valuesToMigrate);
-			$hasChanged = 1 unless ($hasChanged);
-			printTrace("\nParam to update: $param with value @valuesToMigrate",3);
-		    }
-		}
-	    }
-	}
-	updateEntry($new51config_node, "CONFIG_NODE", 0, 1) if ($hasChanged); 
-    }
-}
-
-#############################################################################
-
-sub migrateConfig_LDBM_database{
-    my $config_ldbm = shift;
-    my @params      = keys(%GlobalConfigLDBMparamToMigrate);
-    my $hasChanged  = 0;
-    my $new51config_ldbm ;
-    if ($new51config_ldbm = alreadyExistsIn51($config_ldbm, 1)) {
-	foreach $param (@params) {
-	    if ($config_ldbm->exists($param)){
-		my @valuesToMigrate = $config_ldbm->getValues($param);
-		if (@valuesToMigrate){
-		    if ($new51config_ldbm->exists($param)){
-			my @currentValues   = $new51config_ldbm->getValues($param); 
-			if (Diffs(\@valuesToMigrate, \@currentValues)) {
-			    $new51config_ldbm->setValues($param, @valuesToMigrate);
-			    $hasChanged = 1 unless ($hasChanged);
-			}
-		    }
-		    else {
-			$new51config_ldbm->setValues($param, @valuesToMigrate);
-			$hasChanged = 1 unless ($hasChanged);
-		    }
-		}
-	    }
-	}
-	updateEntry($new51config_ldbm, "CONFIG_LDBM_DATABASE", 0, 1) if ($hasChanged); 
-    }
-}
-
-#############################################################################
-
-sub migrateChainingBE_config{
-    my $chaining_config = shift;
-    my $DN              = $chaining_config->getDN(1);
-    my @params          = ();
-    my $hasChanged      = 0;
-    my $new51chaining_config;
-    if ($DN =~ /^cn=config,cn=chaining database,cn=plugins,cn=config$/i){
-	$new51chaining_config = searchEntry("cn=config,cn=chaining database,cn=plugins,cn=config");
-	@params = keys(%ChainingConfigParams);
-    }
-    if ($DN =~ /^cn=default instance config,cn=chaining database,cn=plugins,cn=config$/i){
-	$new51chaining_config = searchEntry("cn=default instance config,cn=chaining database,cn=plugins,cn=config");
-	@params = keys(%ChainingDefaultInstanceConfigParams);
-    }
-    foreach $param (@params) {
-	if ($chaining_config->exists($param)){
-	    my @valuesToMigrate = $chaining_config->getValues($param);
-	    if (@valuesToMigrate){
-		printTrace("\nParam: $param values To migrate: @valuesToMigrate",3);
-		if ($new51chaining_config->exists($param)){
-		    my @currentValues   = $new51chaining_config->getValues($param); 
-		    printTrace("\nParam: $param 51 current values: @currentValues",3);
-		    if (Diffs(\@valuesToMigrate, \@currentValues)) {
-			$new51chaining_config->setValues($param, @valuesToMigrate);
-			$hasChanged = 1 unless ($hasChanged);
-		    }
-		}
-		else {
-		    $new51chaining_config->setValues($param, @valuesToMigrate);
-		    $hasChanged = 1 unless ($hasChanged);
-		}
-	    }
-	}
-    }
-    updateEntry($new51chaining_config, "CHAINING_BACKEND_CONFIG", 0, 1) if ($hasChanged);
-}
-
-#############################################################################
-
-sub registerSuffix_ChainingBE {
-    my $ldbmDatabase      = shift;
-    my $CN                = $ldbmDatabase->{cn}[0];
-    my $suffixArg         = "nsslapd-suffix";
-    my $suffix            = $ldbmDatabase->{$suffixArg}[0];
-    $oldChainingBackends{$suffix} = $CN;
-}
-
-sub storeMultiplexorBindDN {
-    my $chaining_instance = shift;
-    my $DN      = $chaining_instance->getDN(1);
-    if ($chaining_instance->exists("nsMultiplexorBindDN")){
-	my $bindDN   = $chaining_instance->{nsMultiplexorBindDN}[0];
-	my $new51bindDN = searchEntry($bindDN);
-	if (! $new51bindDN){
-	    # the bindDN entry doesn't yet exist in 5.1 => it will have to be migrated
-	    $MultiplexorBindDNEntriesToMigrate{$bindDN}="\n" ;
-	    printTrace("\nThe bindDN: $bindDN need to be migrated",3);
-	}
-	else {
-	    # do nothing as the entry already exists in 5.1
-	}
-    }
-    
-}
-
-sub importMultiplexorBindDNEntries {
-    # import all entries present in @MultiplexorBindDNEntriesToMigrate in 5.1
-    my @MultiplexorBindDNs = keys (%MultiplexorBindDNEntriesToMigrate);
-    my $ldif_dir       = $ldif_rep;
-    foreach $bindDN (@MultiplexorBindDNs) {
-	printTrace("\nimportMultiplexorBindDNEntries: bindDN to migrate: $bindDN",3);
-	# get the backend in which is stored the bind DN entry
-	my $backendtoExportFrom = getBackendtoExportFrom($bindDN);
-	printTrace("\nbackendtoExportFrom is: $backendtoExportFrom",3);
-	# check wether the backend has been imported in 5.1 or not
-	if (! alreadyMigrated($backendtoExportFrom)) {
-	    if ($backendtoExportFrom ne $NULL) {
-                # if not imported => we need to import the binf DN entry
-		&startServer() unless (isDirectoryAlive());
-		$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 	
-		&ExportAndAddEntry($bindDN, $backendtoExportFrom, $ldif_dir);
-	    }
-	    else {
-		# do nothing
-	    }
-	}
-    }
-    # remove the empty ldif directory 
-    rmdir($ldif_dir) if (-d $ldif_dir);
-    # close the LDAP connection to 5.1
-    $conn->close if ($conn);
-}
-
-sub migrateChainingBE_instance{
-    my $chaining_instance   = shift;
-    my $DN                  = $chaining_instance->getDN(1);
-    &registerSuffix_ChainingBE($chaining_instance);
-    if (alreadyExistsIn51($chaining_instance)) {
-	# already exists
-	printMsg("\n\n*** CHAINING_BACKEND_INSTANCE - $DN already exists");
-	printMsg("\n*** Migration will not update it");
-    }
-    else {
-	&migrate_credential($chaining_instance, "nsmultiplexorcredentials");
-	addEntryTo51($chaining_instance, "CHAINING_BACKEND_INSTANCE", 1);
-	storeMultiplexorBindDN($chaining_instance);
-    }
-}
-
-#############################################################################
-	  
-# create a new LDIF representation of a 5.1 replica consumer 
-sub newLDIFreplica {
-    my $replica               = shift;
-    my $DN                    = $replica->getDN(1);
-    my $new51replica          = $conn->newEntry() ;
-    my $MASTER_OR_MULTIMASTER = "3" ;
-    $new51replica->setDN($DN);
-    foreach $Attr (@nsds5replicaAttrs) {
-    	my @values = $replica->getValues($Attr);
-       	$new51replica->setValues($Attr, @values) if (@values);
-    }
-    my $replicaType = $replica->{nsDS5ReplicaType}[0];
-    if ($replicaType eq $MASTER_OR_MULTIMASTER) {
-	my @nsState    = $replica->getValues("nsState");
-	$new51replica->setValues("nsState", @nsState);
-    }
-    else {
-	$new51replica->setValues("nsDS5ReplicaId", $replicaIdvalue);
-    }
-    return $new51replica;
-}
-
-sub MigrateNSDS5_replica{
-    foreach $replica (@new51replicas) {
-	my $DN = $replica->getDN(1);
-	my $new51replica;
-	if (alreadyExistsIn51($replica)) {
-	    # replica already exists
-	    printMsg("\n\n*** NSDS5_REPLICA - $DN already exists");
-	    printMsg("\n*** Migration will not update it");
-	}
-	else {
-	    $new51replica = &newLDIFreplica($replica);
-	    addEntryTo51($new51replica, "NSDS5_REPLICA", 1);
-	    storeReplicaBindDN($replica);
-	}
-    }
-}
-
-sub parseNSDS5_replica{
-    my $replica               = shift;
-    push @new51replicas, $replica;
-}
-
-sub storeReplicaBindDN {
-    my $replica = shift;
-    my $DN      = $replica->getDN(1);
-    if ($replica->exists("nsDS5ReplicaBindDN")){
-	my $bindDN   = $replica->{nsDS5ReplicaBindDN}[0];
-	my $new51bindDN = searchEntry($bindDN);
-	if (! $new51bindDN){
-	    # the bindDN entry doesn't yet exist in 5.1 => it will have to be migrated
-	    $ReplicaBindDNEntriesToMigrate{$bindDN}="\n" ;
-	    printTrace("\nThe bindDN: $bindDN need to be migrated",3);
-	}
-	else {
-	    # do nothing as the entry already exists in 5.1
-	}
-    }
-}
-
-
-sub importReplicaBindDNEntries {
-    # import all entries present in @ReplicaBindDNEntriesToMigrate in 5.1
-    my @ReplicaBindDNs = keys (%ReplicaBindDNEntriesToMigrate);
-    my $ldif_dir       = $ldif_rep;
-    foreach $bindDN (@ReplicaBindDNs) {
-	printTrace("\nimportReplicaBindDNEntries: bindDN to migrate: $bindDN",3);
-	# get the backend in which is stored the bind DN entry
-	my $backendtoExportFrom = getBackendtoExportFrom($bindDN);
-	printTrace("\nbackendtoExportFrom is: $backendtoExportFrom",3);
-	# check wether the backend has been imported in 5.1 or not
-	if (! alreadyMigrated($backendtoExportFrom)) {
-	    if ($backendtoExportFrom ne $NULL) {
-                # if not imported => we need to import the binf DN entry
-		&startServer() unless (isDirectoryAlive());
-		$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 	
-		&ExportAndAddEntry($bindDN, $backendtoExportFrom, $ldif_dir);
-	    }
-	    else {
-		# do nothing
-	    }
-	}
-    }
-    # remove the empty ldif directory 
-    rmdir($ldif_dir) if (-d $ldif_dir);
-    # close the LDAP connection to 5.1
-    $conn->close if ($conn);
-}
-
-sub alreadyMigrated {
-    my $backendToCheck = shift;
-    foreach $backend (@BACKENDS) {
-	return 1 if ($backend eq $backendToCheck);
-    }
-    return 0 ;
-}
-
-sub belongsSuffix {
-    my $suffix = shift;
-    my $bindDN = shift;
-    return ($bindDN =~ /$suffix\s*$/i);
-}
-
-sub length {
-    my $suffix = shift;
-    my $count = 0;
-    while ($suffix =~ /./g) {
-	$count++;
-    }
-    return $count ;
-}
-
-sub getBackendtoExportFrom {
-    my $bindDN              = shift ;
-    my $sizeOfSuffix        = 0 ;
-    my $NULL                = "";
-    my @oldSuffixes         = keys(%oldBackends);
-    my @oldChainingSuffixes = keys(%oldChainingBackends);
-    my $bindDN_backend      = $NULL;
-    foreach $suffix (@oldSuffixes){
-	printTrace("\ngetBackendtoExportFrom: suffix to compare with is: $suffix",3);
-	if ((belongsSuffix($suffix,$bindDN)) && (length($suffix) > $sizeOfSuffix)) {
-	    $sizeOfSuffix   = length($suffix);
-	    $bindDN_backend = $oldBackends{$suffix}; 
-	    printTrace("\ngetBackendtoExportFrom: bindDN_backend: $bindDN_backend, sizeOfSuffix: $sizeOfSuffix",3);
-	}
-    }
-    foreach $suffix (@oldChainingSuffixes){
-	printTrace("\ngetBackendtoExportFrom: suffix to compare with is a chained suffix: $suffix",3);
-	if ((belongsSuffix($suffix,$bindDN)) && (length($suffix) > $sizeOfSuffix)) {
-	    printMsg("\n\n*** Entry stored on a remote backend - $bindDN");
-	    printMsg("\n*** We don't migrate it");
-	    return $NULL;
-	}
-    }
-    return $bindDN_backend ;
-}
-
-
-sub getBackendtoImportTo {
-    my $bindDN         = shift;
-    my $sizeOfSuffix   = 0;
-    my $NULL           = "";
-    my $suffixArg      = "nsslapd-suffix"; 
-    my $bindDN_backend = $NULL;
-    open( DSELDIF, "< $DSEldif" ) || die "Can't open $DSEldif: $!: ";
-    my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-    while ($entry = readOneEntry $in) {
-	$typeOfEntry = getTypeOfEntry($entry);
-	if ($typeOfEntry eq "LDBM_BACKEND_INSTANCE"){
-	    my $suffix = $entry->{$suffixArg}[0];
-	    if ((belongsSuffix($suffix,$bindDN)) && (length($suffix) > $sizeOfSuffix)) {
-		$sizeOfSuffix   = length($suffix);
-		$bindDN_backend = $entry->{cn}[0]; 
-	    }
-	}
-    }
-    close(DSELDIF);
-    return $bindDN_backend ;
-}
-
-
-sub ExportAndAddEntry {
-    my $DN                   = shift;
-    my $backendtoExportFrom  = shift;
-    my $ldif_dir             = shift;
-    my $ldif                 = "$ldif_dir${PATHSEP}$backendtoExportFrom.ldif" ;
-    # first: export entry pointed out by the $DN to $ldif file
-    $ENV{"$LIB_PATH"}="$oldDir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-    if (! $ldif_dir) { $ldif_dir = $ldif_rep ;}
-    if  (!(-d $ldif_dir)) {
-	mkdir($ldif_dir,0777) or die "\ncan't create $ldif_dir to store temporary ldif files\n";
-    }
-    chdir($oldSlapdExecDir) or die "\nCould not change directory to $oldSlapdExecDir: $!\n";
-    &db2Ldif($ldif, $backendtoExportFrom, $DN);
-    chdir($curdir)  or die "\nCould not change directory to $curdir: $!\n";   
-
-    # then: Add it to 5.1
-    if (! $conn) {
-	$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-    }
-    open( BINDDNLDIF, "< $ldif" ) || die "\nCan't open $ldif: $!: \n";
-    my $in = new Mozilla::LDAP::LDIF(*BINDDNLDIF) ;
-    while ($entry = readOneEntry $in) {
-	my $entryDN = $entry->getDN(1);
-	if ($DN eq $entryDN) {
-	    addEntryTo51($entry, "nsds5ReplicaBindDN", 0);
-	}
-    }
-    close(BINDDNLDIF);
-    # remove the ldif file after the import
-    unlink($ldif) ;
-}
-
-#############################################################################
-sub MigrateNSDS_replication_agreement {
-    foreach $replicationAgreement (@replicationAgreements) {
-	my $DN = $replicationAgreement->getDN(1);
-	if (alreadyExistsIn51($replicationAgreement)){
-	    # replication agreement already exists
-	    printMsg("\n\n*** NSDS_REPLICATION_AGREEMENT - $DN already exists");
-	    printMsg("\n*** Migration will not update it");
-	}
-	else {
-		&migrate_credential($replicationAgreement, "nsDS5ReplicaCredentials");
-	    addEntryTo51($replicationAgreement, "NSDS_REPLICATION_AGREEMENT", 1);
-	}
-    }
-}
-
-
-sub parseNSDS_replication_agreement{
-    my $replicationAgreement = shift;
-    push @replicationAgreements, $replicationAgreement ;
-}
-
-#############################################################################
-	  
-sub migrateChangelog5{
-    my $changelog    = shift;
-    my $DN           = $changelog->getDN(1);
-    my $changelogdir = "nsslapd-changelogdir";
-    if (alreadyExistsIn51($changelog)){
-	# cn=changelog5,cn=config already exists in 5.1
-	my $new51changelog   = searchEntry($DN);
-	my @new51changelodir = $new51changelog->getValues($changelogdir);
-	$changelog->setValues($changelogdir, @new51changelogdir);
-	updateEntry($changelog, "CHANGELOG5", 0, 1);
-    }
-    else {
-	# cn=changelog5,cn=config need to be created in 5.1. 
-	# the changelogdir value must be setup to <root_server51>/slapd-instance/changelogdb
-	$changelog->setValues($changelogdir,"${serverHome}${PATHSEP}changelogdb");
-	addEntryTo51($changelog, "CHANGELOG5", 1);
-    }
-}
-
-#############################################################################
-
-sub migrateReplication{
-    my $replication   = shift;
-    my $DN            = $replication->getDN(1);
-    if (alreadyExistsIn51($replication)){
-	# replication agreement already exists
-	printMsg("\n\n*** $DN already exists");
-	printMsg("\n*** Migration will not update it");
-    }
-    else {
-	addEntryTo51($replication, "REPLICATION", 1);
-    }
-}
-
-#############################################################################
-
-sub migrateSecurity{
-    my $security   = shift;
-    if (alreadyExistsIn51($security)){
-	# already exists in 5.1
-	updateEntry($security, "SECURITY", 0, 1);
-    }
-    else {
-	addEntryTo51($security, "SECURITY", 1);
-    }
-}
-
-#############################################################################
-	     
-sub migrateSNMP{
-    my $snmp   = shift;
-    if (alreadyExistsIn51($snmp)){
-	# already exists in 5.1
-	updateEntry($snmp, "SNMP", 0, 1);
-    }
-    else {
-	addEntryTo51($snmp, "SNMP", 1);
-    }
-}
-
-#############################################################################
-# printMsg print message to the user standard output.  
-
-sub printMsg {
-
-  my $TypeMsg = shift ;
-  my $Msg     = shift ;
-  my $LineNb  = shift ;
-  if ($LineNb) {
-    printTrace("Line: $LineNb, $TypeMsg, $Msg");
-  }
-  else {
-    printTrace("$TypeMsg $Msg");
-  }
-}
-
-#############################################################################
-#  print message error to the user standard output.  
-
-sub printTrace {
-
-  my $Msg     = shift ;
-  my $level   = shift ;
-  my $sep     = shift ;
-
-  if ($sep) {
-      print "\n-------------------------------------------------------------------------";
-      print LOGFILE "\n-------------------------------------------------------------------------";
-  }
-  
-  if ($level <= $TRACELEVEL) {
-    print($Msg);    
-    print LOGFILE $Msg ;
-  }
-}  
-
-#############################################################################
-# this subroutine implements a very stupid version of diff
-
-sub diff {
-	my $f1              = shift;
-	my $f2              = shift;
-	my $lineToBeginWith = shift;
-	my $NULL            = "" ;
-	my $diff_f1         = $NULL ;
-	my $diff_f2         = $NULL ;
-	my $retval          = $NULL ;
-	my $ret;
-	open(F1, "$f1") or die "Could not open file $f1";
-	open(F2, "$f2") or close(F1), die "Could not open file $f2";
-
-	while (defined($l1 = <F1>)) {
-	    if ($lineToBeginWith){
-		$lineToBeginWith -- ;
-		next ;
-	    }
-	    next if ($l1 =~ /^\#/);
-	    $ret = defined($l2 = <F2>);
-	    if ($ret) {
-		$ret = defined($l2 = <F2>) while ($ret && ($l2 =~ /^\#/)) ;
-		if ($ret) {
-		    if (!($l1 eq $l2)) {
-			
-			# ignore whitespace
-			$l1_clean = $l1 ;
-			$l2_clean = $l2 ;
-			$l1_clean =~ s/\s//g;
-			$l2_clean =~ s/\s//g;
-						  
-			if (!($l1_clean eq $l2_clean)) {
-			    $diff_f1 .= "${l1}" unless ($l1_clean eq $NULL);
-			    $diff_f2 .= "${l2}" unless ($l2_clean eq $NULL);
-			}
-		    }
-		}
-		else {
-		   next if ($l1 =~ /^\s*$/) ;
-		   $diff_f1 .= "${l1}";
-		}
-	    }
-	    else {
-		next if ($l1 =~ /^\s*$/) ;
-		$diff_f1 .= "${l1}";
-	    }
-	}
-	
-	while (defined($l2 = <F2>)) {
-	    	if (($l2 =~ /^\#/) || ($l2 =~ /^\s*$/)) { 
-		    next ;
-		}
-		else {
-		    $diff_f2 .= "${l2}" ;
-		}
-	}
-
-	close(F1);
-	close(F2);
-
-	$retval .= "- differences present in your config file but not in standard file:\n\n". "$diff_f1\n" if ($diff_f1) ;
-	$retval .= "- differences present in standard file but not in your config file:\n\n" . "$diff_f2"  if ($diff_f2) ;
-	return $retval ;
-}
-
-sub CompareStdConfigFiles {
-  # Compare each configuration file against its default version.  If it has changed,
-  # notify the user that the file has changed and will need to be checked by the
-  # user.  This should be safe to do because there should be no path information
-  # stored in these conf files, which are just schema stuff.
-  # printTrace("\nCheck if standard configuration files have changed",3);
-
-  # get the version of the DS to migrate
-  ($oldVersion, $oldMinor) = &getVersion($oldDir);
-  # get the version of the new DS
-  ($Version, $Minor) = &getVersion($root);
-
-  my $origFilePath = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}install${PATHSEP}schema${PATHSEP}" ;
-  my $FilesChanged = "";
-  my $AllDiffs     = "***********************************************************************";
-  my $NoChanges    = "" ;
-  my $lineToBegin  = 0 ;
-  opendir(CONFDIR, $oldSchemaDir) or
-    die "Error: could not open migrated config dir $oldConfDir: $!";
-  
-  foreach $file (readdir(CONFDIR)) {
-       $origFile   = $origFilePath . $file ;
-       $configFile = $oldSchemaDir . $file ;
-      if (( exists($stdIncludes{lc($file)})) && (-f $origFile)) {
-	  $diffs = &diff($configFile, $origFile, $lineToBegin);
-	  $lineToBegin = 0 if $lineToBegin ;
-	  if ($diffs) {
-	      $FilesChanged .= "\n$configFile";
-	      $AllDiffs     .= "\n$configFile  is different than the standard configuration file" ;
-	      $AllDiffs     .= "\nYou will need to check this file and make sure its changes are compatible ";
-	      $AllDiffs     .= "with the new directory server\nHere are the differences:\n";
-	      $AllDiffs     .= "$diffs \n\n";
-	      $AllDiffs     .= "***********************************************************************";
-	  } 
-	  else {
-  	      $NoChanges .= "\n$configFile";
-	  }
-      }
-   }
-  closedir(CONFDIR);
-
-if ($FilesChanged) {
-    printTrace("\nNo changes to old configuration files:$NoChanges",3) ;
-    printTrace("\n***********************************************************************",3) ;
-    printMsg("\nThe following standard files have been modified: $FilesChanged");
-    if ($NO_INPUT_USER) {
-	# do nothing
-    }
-    else {
-	printMsg("\nDo you want to see the differences Yes/No [No] ?") ;
-	my $answer = <STDIN> ;
-	if ($answer =~ /y|yes/i) {
-	    printMsg("$AllDiffs");
-	}
-	printMsg("\nDo you want to continue the migration Yes/No [No] ?");
-	$answer = <STDIN> ;
-	if (! ($answer =~ /y|yes/i)) {
-	    exit(1);
-	}
-    }
-  }
-}
-
-
-
-#############################################################################
-
-# this is used to run the system() call, capture exit and signal codes,
-# and die() upon badness; the first argument is a directory to change
-# dir to, if any, and the rest are passed to system()
-sub mySystem {
-    my $rc = &mySystemNoDie(@_);
-    my ($dir, @args) = @_;
-    if ($rc == 0) {
-# success
-    } elsif ($rc == 0xff00) {
-		die "Error executing @args: error code $rc: $!";
-    } elsif ($rc > 0x80) {
-        $rc >>= 8;
-		die "Error executing @args: error code $rc: $!";
-    } else {
-        if ($rc &   0x80) {
-            $rc &= ~0x80;
-        } 
-		die "Error executing @args: received signal $rc: $!";
-    }
-
-	# usually won't get return value
-	return $rc;
-}
-
-# This version does not die but just returns the error code
-sub mySystemNoDie {
-	my ($dir, @args) = @_;
-	if ($dir && ($dir ne "")) {
-		chdir($dir) or die "Could not change directory to $dir: $!";
-	}
-	my $cmd = $args[0];
-	# the system {$cmd} avoids some NT shell quoting problems if the $cmd
-	# needs to be quoted e.g. contains spaces; the map puts double quotes
-	# around the arguments on NT which are stripped by the command
-	# interpreter cmd.exe; but don't quote things which are already quoted
-	my @fixargs = map { /^[\"].*[\"]$/ ? $_ : $quote . $_ . $quote } @args;
-	my $rc = 0;
-	if ($cmd =~ /[.](bat|cmd)$/) {
-		# we have to pass batch files directly to the NT command interpreter
-		$cmd = $com_spec;
-#		print "system $cmd /c \"@fixargs\"\n";
-		$rc = 0xffff & system {$cmd} '/c', "\"@fixargs\"";
-	} else {
-#		print "system $cmd @fixargs\n";
-        $rc = 0xffff & system {$cmd} @fixargs;
-        }
-	chdir(${curdir})  or die "Could not change directory to $curdir: $!";
-	return $rc;
-}
-
-###########################################################################################
-#                                                                                         #
-#                    Export/Import of the backends in @BACKENDS                           #
-#                                                                                         #
-###########################################################################################
-
-sub manydb2Ldif {
-  my $ldif_dir = shift;  
-  $ENV{"$LIB_PATH"}="$oldDir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-  if (! $ldif_dir) { $ldif_dir = $ldif_rep ;}
-  if  (!(-d $ldif_dir)) {
-      mkdir($ldif_dir,0777) or die "can't create $ldif_dir to store temporary ldif files";
-  }
-  chdir($oldSlapdExecDir)  or die "Could not change directory to $oldSlapdExecDir: $!";
-  foreach $backend (@BACKENDS) {
-    my $ldif = "${ldif_dir}$backend.ldif" ;
-    &db2Ldif($ldif, $backend);
-  }
-  print "  Done.\n";
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";   
-}
-
-sub db2Ldif {
-  my $ldif            = shift ;
-  my $backend         = shift ;
-  my $include_suffix  = shift ;
-  my $db2ldif_param ;
-  if ($include_suffix) {
-      $db2ldif_param   = "db2ldif -D $oldHome -n $backend -a $ldif -s \"$include_suffix\"";
-  }
-  else {
-      $db2ldif_param   = "db2ldif -D $oldHome -n $backend -a $ldif";
-  }
-  open(DB2LDIF, "${quote}${quote}$slapdExecName${quote} $db2ldif_param${quote} 2>&1 |") or die "Could not run ns-slapd program $ldif2db_exe\n";
-  sleep(1); # allow some data to accumulate in the pipe
-  my $ii = 0;
-  while (<DB2LDIF>) {
-      ++$ii;
-      if (($ii % 250) == 0) {
-	printMsg("  Processing...\n");
-      }
-      printMsg($_);
-  }
-  close(DB2LDIF);
-  # set the ownership of the ldif file; should be the same as the 5.x slapd user id
-  if ((! $isNt) && ($oldlocaluser ne $localuser)) {
-      if (-f $ldif) {
-	  chown( $newuid, $newgid, $ldif) or printMsg("\nUnable to change the ownership of $ldif to $localuser") ;
-      }
-  }   
-}
-
-sub manyLdif2db {
-  my $ldif_dir = shift;
-  $ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-  chdir($slapdExecDir)  or die "Could not change directory to $slapdExecDir: $!";
-  foreach $backend (@BACKENDS) {
-    my $ldif = "${ldif_dir}$backend.ldif" ;
-    &Ldif2db($ldif, $backend);
-  }
-  # remove the empty ldif directory 
-  rmdir($ldif_dir);
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";
-}
-
-
-sub Ldif2db {
-  my $ldif    = shift ;
-  my $backend = shift ;
-  my $ldif2db_param = "ldif2db -D $serverHome -n $backend -i $ldif";
-  open(LDIF2DB, "${quote}${quote}$slapdExecName${quote} $ldif2db_param${quote} 2>&1 |") or die "Could not run ns-slapd program $ldif2db_exe\n";
-  sleep(1); # allow some data to accumulate in the pipe
-  while (<LDIF2DB>) {
-      printMsg($_);
-  }
-  close(LDIF2DB);
-  # remove the ldif file after the import
-  unlink($ldif) ;
-}
-
-
-###########################################################################################
-#                                                                                         #
-#                    Running/Stopping the Server                                          #
-#                                                                                         #
-###########################################################################################
-
-
-
-sub isDirectoryAlive {
-    die "\n Migration aborted. Check your 5.0 and 5.1 iPlanet Directory Server are installed on the same machine \n" if ( $LDAPservername == -1 );
-    my $test_conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd);
-    if ($test_conn) {
-	$test_conn->close();
-	return 1;
-    }
-    else {
-	return 0 ;
-    }
-}
-
-
-sub startServer {
-  my $instanceDir = ${serverHome} ;
-  my $errLog = $instanceDir . $PATHSEP . 'logs' . $PATHSEP . 'errors';
-  # emulate tail -f
-  # if the last line we see does not contain "slapd started", try again
-  my $done = 0;
-  my $started = 0;
-  my $code = 0;
-  my $lastLine = "";
-  my $timeout = time + 240;	# 4 minutes
-  $ENV{"$LIB_PATH"}="${root}${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-
-  my $startCmd = $instanceDir . $PATHSEP . 'start' . $script_suffix;
-  if (! -f $startCmd) {
-    $startCmd = $instanceDir . $PATHSEP . 'start-slapd' . $script_suffix;
-  }
-  $code = &mySystem($instanceDir,$startCmd);
-  open(IN, $errLog) or die "Could not open error log $errLog: $!";
-  my $pos = tell(IN);
-  while (($done == 0) && (time < $timeout)) {
-    for (; ($done == 0) && ($_ = <IN>); $pos = tell(IN)) {
-      $lastLine = $_;
-      #			print;
-      # the server has already been started and shutdown once . . .
-      if (/slapd started\./) {
-	$started++;
-	if ($started == 2) {
-	  $done = 1;
-	}
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/Initialization Failed/) {
-	#				print "Server failed to start: $_";
-	$code = &mySystem($instanceDir, $startCmd);
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/exiting\./) {
-	#				print "Server failed to start: $_";
-	#$code = &mySystem($startCmd);	
-	$code = &mySystem($instanceDir, $startCmd);
-      }
-    }
-    if ($lastLine =~ /PR_Bind/) {
-      # server port conflicts with another one, just report and punt
-      print $lastLine;
-      print "This server cannot be started until the other server on this\n";
-      print "port is shutdown.\n";
-      $done = 1;
-    }
-    if ($done == 0) {
-      # rest a bit, then . . .
-      sleep(2);
-      # . . . reset the EOF status of the file desc
-      seek(IN, $pos, 0);
-    }
-  }
-  close(IN);
-  
-  sleep(5);
-  die "\nUnable to start the $Version.$Minor iPlanet Directory Server\n" unless (isDirectoryAlive());
- 
-  return 0;
-}
-
-sub stopServer {
-	my $root = shift;
-	my $name = shift;
-	$maxStopIterations = 5;
-	print "\nShutting down server $name . . .\n";
-	$ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop' . $script_suffix . $quote;
-	if (! -f $stopCmd) {
-		$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop-slapd' . $script_suffix . $quote;
-	}
-
-	if (! -f $stopCmd) {
-		# no stop command, probably a 1.X system; for NT, we'll try net stop
-		# for unix, we'll get the pid and kill it
-		if ($isNT) {
-			$stopCmd = 'net stop ' . $name;
-		} else {
-			# see if there is a pid file
-			$pidfile = $root . $PATHSEP . $name . $PATHSEP . 'logs' .
-				$PATHSEP . 'pid';
-			if (open(PIDFILE, $pidfile)) {
-				chomp($pid = <PIDFILE>);
-				close(PIDFILE);
-				while ($maxStopIterations-- && !$exitCode) {
-					$exitCode = kill(15, $pid);
-				}
-				$stopCmd = undef;
-			}
-		}
-	}
-
-	# keep looping until the stop cmd returns an error code, which usually
-	# means that what ever we want to stop is stopped, or some other error
-	# occurred e.g. permission, or no such service
-	$exitCode = &runAndIgnoreOutput($stopCmd);
-#	print "stopServer: exitCode=$exitCode\n";
-	while ($stopCmd && $maxStopIterations-- && $exitCode) {
-		$exitCode = &runAndIgnoreOutput($stopCmd);
-#		print "stopServer: exitCode=$exitCode\n";
-	}
-
-	if (!$maxStopIterations) {
-		print "Warning: could not shutdown the server: $!\n";
-	}
-	sleep(10) ;
-	$exitCode = 0;
-}
-
-
-sub runAndIgnoreOutput {
-	my $cmd = shift;
-	printMsg(".");
-	open(RUNCMD, "${quote}$cmd${quote} 2>&1 |") or die "Error: could not run $cmd: $!";
-	printMsg(".");
-	sleep(1); # allow pipe to fill with data
-	printMsg(".");
-	while (<RUNCMD>) {
-#		print;
-	}
-	my $code = close(RUNCMD);
-#	print "runAndIgnore: code=$code status=$?\n";
-	return $?;
-}
-
-#############################################################################
-# migrate SSL info
-
-sub MigrateSSL {
-  my $secPwd = 'bidon' ;
-  # copy the SSL directory
-  &copyDir("$oldHome${PATHSEP}ssl","$serverHome${PATHSEP}ssl") if (-d "$oldHome${PATHSEP}ssl");
-  # copy the cert db and key files
-  if ( -d "$oldDir${PATHSEP}alias") {
-    $aliasDir = "$root${PATHSEP}alias";
-    if (! -d $aliasDir) {
-      mkdir($aliasDir, 0750);
-    }
-    my $keydb         = "$aliasDir${PATHSEP}slapd-$newname-key3.db"  ;
-    my $certdb        = "$aliasDir${PATHSEP}slapd-$newname-cert7.db" ;
-    my $old_keydb     = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-key3.db" ;
-    my $old_certdb    = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-cert7.db"; 
-    my $keydb_backup  = "$aliasDir${PATHSEP}slapd-$newname-key3.db_backup"  ;
-    my $certdb_backup = "$aliasDir${PATHSEP}slapd-$newname-cert7.db_backup" ;
-    if (-f $old_keydb) {
-    	if (-f $keydb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$keydb already exists. backup in $keydb_backup ...");
-		&copyBinFile($keydb,$keydb_backup);
-		&copyBinFile($old_keydb,$keydb);
-	    }
-	    else {
-		print("\n\n$keydb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    &copyBinFile($old_keydb,$keydb);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_keydb,$keydb);
-	}
-    }
-    if (-f $old_certdb) {
-	if (-f $certdb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$certdb already exists. backup in $certdb_backup ...");
-		&copyBinFile($certdb,$certdb_backup);
-		&copyBinFile($old_certdb,$certdb);
-	    }
-	    else {
-		print("\n\n$certdb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    &copyBinFile($old_certdb,$certdb);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_certdb,$certdb);
-	}
-    }
-    # copy the old password file
-    if (-f "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt") {
-      &copyBinFile(
-		   "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt",
-		   "$aliasDir${PATHSEP}$type-$newname-pin.txt"
-		  );
-    }
-  }
-
-}
-
-sub DisableSSL {
-  my $entry      = $conn->search("cn=config","base","objectclass=*");
-  my $LDAPparam =  "nsslapd-security" ;
-  my $Value     = "off" ;
-  if ($entry->{$LDAPparam}[0] ne $Value) { 
-    printTrace("\nDisable SSL...",1);
-    $entry->setValues($LDAPparam, $Value);
-  }
-  my $res = $conn->update($entry);
-  if ($res) {
-    printTrace("\nSSL disabled",2);
-  }
-  else {
-    printMsg("\nCan't disabled SSL. The server may have problems to start");
-  }
-}
-
-# enable the migration of client authentication informations
-sub MigrateCertmap {
-  # backup the old certmap.conf and replace it with the new one
-  my $oldCertmap = "$oldDir${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf";
-  my $newCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf"  ;
-  my $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-  if (-f $oldCertmap) {
-      if ($NO_INPUT_USER) {
-	  printMsg("\n$newCertmap has been backup in $backupCertmap"); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-      else {
-	  my $Ask = 1 ;  
-	  while ($Ask) {
-	      printMsg("\n\nWhere do you want to back up the file $newCertmap [$backupCertmap] ?") ;
-	      my $Answer = <STDIN> ;
-	      $backupCertmap = $Answer if ($Answer ne "\n");
-	      chomp($backupCertmap);
-	      printTrace("\nDest: .$backupCertmap.",4);
-	      if (-e $backupCertmap) {
-		  printMsg("\n\n$backupCertmap already exists. Do you want to overwrite it Yes/No [No] ?") ;
-		  if (<STDIN> =~ /yes|y/i) {
-		      $Ask = 0 ;
-		  }
-		  else {
-		      $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-		  }
-	      }
-	      else {
-		  $Ask = 0 ;
-	      }
-	  }
-	  printTrace("\nBackup file: $newCertmap in $backupCertmap",4); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-  }
-  else {
-  }
-}
-
-sub hasChangedoldCertmap {
-    my $certmapfile = shift ;
-    my @reference = ("certmap default         default",
-		     "default:DNComps",
-		     "default:FilterComps     e") ;
-    my $cpt = 0 ;
-    printTrace("\nhasChangedoldCertmap",3);
-    open(CERTMAP,"< $certmapfile");
-    while (<CERTMAP>) {
-	if ((! /^\s*#/) && (! /^\s*$/)) {
-	    my $ref = $reference[$cpt] ;
-	    printTrace("\nValue: $_, ref: $ref",4);
-	    if (! /^\s*$ref\s*$/) {
-		return 1 ;
-	    }
-	    else {
-		$cpt++ ;
-	    }
-	}
-    }
-    close (CERTMAP);
-    printTrace("\ncpt: $cpt",4);
-    if ($cpt < $#reference) {
-	return 1 ;
-    }
-    else {
-        return 0 ;
-    }	
-}
-
-
-###########################################################################################
-#                                                                                         #
-#                    Copy directory and files functions                                   #
-#                                                                                         #
-###########################################################################################
-
-
-sub copyDir {
-    my	$src = shift;
-    my	$dest = shift;
-	my  $exclude = shift;
-
-    opendir( SRC, $src ) or die "Can't open directory $src: $!: ";
-	my $mode;
-	my $uid;
-	my $gid;
-    mkdir ( $dest , 0755 ) or die "\nCan't create directory $dest. \nPlease check you have enough rights to create it and/or check that your parent directory exists.\n" if !( -e $dest );
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    local ( @files ) = readdir ( SRC );
-    closedir( SRC );
-    for ( @files ) {
-		if ( $_ eq "." || $_ eq ".." ) {
-			next;
-		} elsif ( $exclude && /$exclude/ ) {
-			next;
-		} elsif( -d "$src${PATHSEP}$_")  {
-			&copyDir ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_" ); 
-		} else {
-			&copyBinFile ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_");
-		}
-    }
-}
-
-sub copyBinFile {
-    my	$src = shift;
-    my	$dest = shift;
-    my  $buf = "";
-    my  $bufsize = 8192;
-
-    open( SRC, $src ) || die "Can't open $src: $!\n";
-	# if we are given a directory destination instead of a file, extract the
-	# filename portion of the source to use as the destination filename
-	if (-d $dest) {
-		$dest = $dest . $PATHSEP . &basename($src);
-	}
-    open( DEST, ">$dest" ) || die "Can't create $dest: $!\n";
-    binmode SRC;
-    binmode DEST;
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    while (read(SRC, $buf, $bufsize)) {
-		print DEST $buf;
-    }
-    close( SRC );
-    close( DEST );
-}
-
-#############################################################################################################
-# backup 5.x configuration files                                                                            #
-# backup the directory <root_server5>/slapd-instance/config dans <root_server5>/slapd-instance/BackupConfig #                           #
-#                                                                                                           #
-#############################################################################################################
-
-
-sub backupConfigFiles {
-  # backup the 5.x config files
-  my $src = "$serverHome${PATHSEP}config" ;
-  my $dest = "$serverHome${PATHSEP}config_backup" ;
-  if ($NO_INPUT_USER) {
-      printMsg("\n$src has been backup in $dest"); 
-      &copyDir($src,$dest);
-  }
-  else {
-      my $Ask = 1 ;  
-      while ($Ask) {
-	  printMsg("\n\nWhere do you want to back up your configuration directory [$dest] ?") ;
-	  my $Answer = <STDIN> ;
-	  $dest = $Answer if ($Answer ne "\n");
-	  chomp($dest);
-	  printTrace("\nDest: .$dest.",4);
-	  if (-e $dest) {
-	      printMsg("\n\n$dest already exists. Do you want to overwrite it Yes/No [No] ?") ;
-	      if (<STDIN> =~ /yes|y/i) {
-		  $Ask = 0 ;
-	      }
-	      else {
-		  $dest = "$serverHome${PATHSEP}config_backup" ;
-	      }
-	  }
-	  else {
-	      $Ask = 0 ;
-	  }
-      }
-      printTrace("\nBackup Directory: $src in $dest",4); 
-      &copyDir($src,$dest);
-  }
-}
-#############################################################################
-
-sub getLDAPservername {
-    my $oldLDAPservername;
-    my $LDAPservername;
-    my $localhost = "nsslapd-localhost";
-    open(OLDDSELDIF, "< $oldDSEldif") or die "\nError: could not open old config file $oldDSEldif \n";
-    my $in = new Mozilla::LDAP::LDIF(*OLDDSELDIF) ;
-    while ($entry = readOneEntry $in) {
-        my $DN = $entry->getDN(1) ;
-	if ($DN =~ /^cn=config$/i) {
-	    my @values = $entry->getValues($localhost);
-	    if ($entry->size($localhost)) {
-		$oldLDAPservername = $values[0];
-		printTrace("\nName of the old LDAP server: $oldLDAPservername",3);
-	    }
-	    break;
-	}	
-    } 
-    close(OLDSELDIF);
-
-    open( DSELDIF, "< $DSEldif" ) || die "\nCan't open $DSEldif \n";
-    my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-    while ($entry = readOneEntry $in) {
-        my $DN = $entry->getDN(1) ;
-	if ($DN =~ /^cn=config$/i) {
-	    my @values = $entry->getValues($localhost);
-	    if ($entry->size($localhost)) {
-		$LDAPservername = $values[0];
-		printTrace("\nName of the new LDAP server: $LDAPservername",3);
-	    }
-	    break;
-	}	
-    } 
-    close(DSELDIF);
-    # check ol and new Directory Instance are installed on the same physical machine.
-    if (lc($oldLDAPservername) ne lc($LDAPservername)) {
- 	 # warn the user he tries to migrate a 4.x server installed on a different machine from the 5.x one
-       	 printMsg("\n\nYour old instance is on $oldLDAPservername, whereas your new instance is on $LDAPservername. Migration on different machines is not supported. Do you want to continue ? Yes/No [No]:") ;
-       	 if (! (<STDIN> =~ /yes|y/i)) {
-       	     return -1;
-       	 }
-     }
-     return $LDAPservername ;       
-}
-
-#############################################################################
-
-sub getVersion {
-	my $dir      = shift;
-	my $version     = 0;
-	my $minor       = 0;
-	my $buildNumber = 0;
-	my $progDir     = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-	my $progDir2    = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}";
-
-	# find the slapd executable
-	$prog = $dir . $progDir . $slapdExecName;
-	if (! -f $prog) {
-	    $prog = $dir . $progDir2 . $slapdExecName;
-	    if (-f $prog && $isNT) {
-	       	# if slapd is in bin/slapd and we're on NT, just assume version 1;
-	       	# apparently, slapd.exe doesn't like the -v argument . . .
-	       	return ( '1', $minor );
-	    }
-	    else{
-		die "Could not run slapd program $prog: $!";
-	    }
-	}
-	else {
-	    chdir($dir . $progDir) or die "Could not change directory to $dir$progDir: $!";;
-	}
-	$ENV{"$LIB_PATH"}="$dir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	# read the old version from the old slapd program
-
-	open(F, "${quote}${quote}$prog${quote} -v${quote} 2>&1 |") or
-		die "Could not run slapd program $prog: $!";
-	sleep(1); # allow some data to accumulate in the pipe
-#	print "Output from $prog -v:\n";
-	while (<F>) {
-		#print;
-		if (/^Netscape-Directory\/(\d+)\.(\d+)\s+(\S+)/) {
-			$version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-		elsif (/^Netscape-Directory\(restrict?ed-mode\)\/(\d+)\.(\d+)\s+(\S+)/) { # we can have restricted-mode or restriced-mode ...
-		        $version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-		elsif (/^iPlanet-Directory\/(\d+)\.(\d+)\s+(\S+)/i) {
-			$version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-	}
-	$code = close(F);
-#	print "$prog returned code=$code status=$?\n";
-	$ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	
-	if ($version == 0) {
-	    die "\nCould not determine version of the directory server in $dir: \n";
-	}
-
-	# distinguish the 4.1 and the 4.11 thanks to the buildNumber
-	if (($version == 4) && ($minor == 1)){
-	    if (! ($buildNumber =~ /^B99\.16/)) {
-		# it's not a 4.1 Netscape Directory Server => it's a 4.11
-		$minor = 11 ;
-	    }
-	}
-	chdir($curdir) or die "Could not change directory to $curdir: $!" ;
-	return ( $version, $minor );
-}
-
-
-###############################################################################################
-sub normalizeDir {
-    my $dir = shift ;
-    my $dir_prec = "" ;
-    while ($dir_prec ne $dir) {
-	$dir_prec = $dir ;
-	if ($isNT) {
-	    grep { s@\\\\@\\@g } $dir ;
-        }
-        else {
-	    grep { s@//@/@g } $dir ;
-        }
-    }
-    return $dir ;
-}
-
-
-###############################################################################################
-
-sub GetTime {
-    my $tm = localtime;
-    (my $sec, my $min, my $hour, my $dd, my $mm, my $yy) = ($tm->sec, $tm->min, $tm->hour, $tm->mday, ($tm->mon)+1, ($tm->year)+1900);
-    $sec  = "0$sec"  unless $sec > 9  ;
-    $min  = "0$min"  unless $min > 9  ;
-    $hour = "0$hour" unless $hour > 9 ;
-    $dd   = "0$dd"   unless $dd > 9   ;
-    $mm   = "0$mm"   unless $mm > 9   ;
-    return ($sec, $min, $hour, $dd, $mm, $yy);
-}
-
-###############################################################################################
-# get uid and group id of the 5.x slapd server.
-# The uid is done through the nsslapd-localuser attribute
-
-sub getuid_gid {
-    my $newuid ;
-    my $newgid ;
-    my $localuser ;
-    my $localuser_attr = "nsslapd-localuser" ;
-    if (! $isNT) {
-	&startServer() unless (isDirectoryAlive());
-	my $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Can't contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	my $entry = $conn->search("cn=config ", "base","objectclass=*", 0, ($localuser_attr)) ;
-	# Tests wether we succeed to get the entry cn=config
-	die "\nCan't get the entry cn=config \n" unless ($entry);     
-	my @values = $entry->getValues($localuser_attr);
-	$conn->close();
-	if ($#values == -1 || ($values[0] eq "") ) { # tests wether the nsslapd-localuser attribute has a value
-	    printMsg("\nNo localuser has been found in the configuration of the directory. ");
-	    if ($NO_INPUT_USER) {
-		printMsg("\nWe considered nobody as the localuser");
-		$localuser = "nobody" ;
-	    }
-	    else {
-		my $Ask = 1 ;  
-		while ($Ask) {
-		    printMsg("\nUnder what user does your $Version.$Minor directory server run [nobody] ? ") ;
-		    $localuser = <STDIN> ;
-		    chomp($localuser);
-		    $localuser = "nobody" if ($localuser eq "");
-		    ($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ;
-		    if ($newuid) {
-			$Ask = 0 ;
-		    }
-		    else {
-			printMsg("\nError: $localuser is unknown from the system ");
-		    }
-		}
-	    }	
-	}
-	else {
-	    $localuser = $values[0]; # returns the first value (we should only have one localuser)
-	    my $size = $#values ;
-	}
-	($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ; 
-	return ($localuser, $newuid, $newgid) ;
-    }
-    else {
-	return () ;
-    }
-}
-
-sub getolduid_gid {
-    my $oldlocaluser ;
-    my $localuserAttr = "nsslapd-localuser";
-    my $entry ;
-    if (! $isNT) {
-	open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-	my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-	while ($entry = readOneEntry $in) {
-	    $typeOfEntry = getTypeOfEntry($entry);
-	    if ($typeOfEntry eq "CONFIG_NODE") {
-		$oldlocaluser = $entry->{$localuserAttr}[0] if ($entry->exists($localuserAttr));
-		break ;
-	    }
-       	}
-       	close(DSE);
-	($olduid, $oldgid) = (getpwnam("$oldlocaluser"))[2..3] ; 
-	return ($oldlocaluser, $olduid, $oldgid) ; 
-    }
-    else {
-	return ();
-    } 
-}
-###############################################################################################
-# get current directory
-
-sub getCwd {
-        my $command = $isNT ? "cd" : "/bin/pwd";
-        open(PWDCMD, "$command 2>&1 |") or
-                die "Error: could not execute $command: $!";
-        # without the following sleep, reading from the pipe will
-        # return nothing; I guess it gives the pwd command time
-        # to get some data to read . . .
-        sleep(1);
-        my $currentdir;
-        while (<PWDCMD>) {
-                if (!$currentdir) {
-                        chomp($currentdir = $_);
-                }
-        }
-        my $code = close(PWDCMD);
-#       if ($code || $?) {
-#               print "$command returned code=$code status=$? dir=$curdir\n";
-#       }
-#       print "getCwd curdir=\[$curdir\]\n";
-        return $currentdir;
-}
-
-################################
-#	Need to migrate the credential.
-#	If the credential can not be migrated, leave it at it is
-################################
-sub migrate_credential{
-	my $entry_to_modify = shift;
-	my $credentials_attr = shift;
-	my @old_value = $entry_to_modify->getValues($credentials_attr); 
-	my $migratecredExecName = 'migratecred';
- 
-    my @new_cred   = `${quote}${quote}$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}admin${PATHSEP}bin${PATHSEP}$migratecredExecName${quote} -o $oldHome -n $serverHome -c @old_value`;
-
- 	if ( $? == 0 ) 
-	{
- 		$entry_to_modify->setValues($credentials_attr, @new_cred);
-	}
-}
-

ldap/admin/src/scripts/template-migrate5to6

@@ -1,3091 +0,0 @@
-#{{PERL-EXEC}}
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-#
-
-# enable the use of our bundled perldap with our bundled ldapsdk libraries
-# all of this nonsense can be omitted if the mozldapsdk and perldap are
-# installed in the operating system locations (e.g. /usr/lib /usr/lib/perl5)
-BEGIN {
-	my $sroot = "{{DS-ROOT}}";
-	push @INC, "$sroot/lib/perl/arch", "$sroot/lib/perl";
-	if ($ENV{LD_LIBRARY_PATH}) {
-		$ENV{LD_LIBRARY_PATH} .= ":";
-	}
-	$ENV{LD_LIBRARY_PATH} .= "$sroot/shared/lib";
-	# this is only needed for HP/ux PA-RISC, but it doesn't hurt other platforms
-	if ($ENV{SHLIB_PATH}) {
-		$ENV{SHLIB_PATH} .= ":";
-	}
-	$ENV{SHLIB_PATH} .= "$sroot/shared/lib";
-}
-# Migrate a 5.x directory server to a 6.2 directory server
-
-#######################################################################################################
-# enable the use of Perldap functions
-require DynaLoader;
-
-use Getopt::Std;
-use Mozilla::LDAP::Conn;
-use Mozilla::LDAP::Entry;
-use Mozilla::LDAP::LDIF;
-use Mozilla::LDAP::Utils qw(:all);
-use Mozilla::LDAP::API qw(:api :ssl :apiv3 :constant); # Direct access to C API
-use Time::localtime;
-use File::Basename;
-use Class::Struct ; 
-
-#######################################################################################################
-
-sub usage {
-        print(STDERR "\nUsage: $0 -D rootdn { -w password | -w - | -j filename } -p port \n");
-	print(STDERR "       -o oldInstancePath -n newInstancePath [-t tracelevel] [-L logfile]\n");
-        print(STDERR "************** parameters in brackets are optionals, others are required **************\n");
-        print(STDERR " Opts: -D rootdn              - new 6.2 Directory Manager\n");
-        print(STDERR "     : -w password            - new 6.2 Directory Manager's password\n");
-        print(STDERR "     : -w -                   - Prompt for new 6.2 Directory Manager's password\n");
-        print(STDERR "     : -j filename            - Read new 6.2 Directory Manager's password from file\n");
-        print(STDERR "     : -p port                - new 6.2 Directory Server port\n");
-        print(STDERR "     : -o oldInstancePath     - Path of the old instance to migrate \n");
-        print(STDERR "     : -n newInstancePath     - Path of the new 6.2 instance\n");
-        print(STDERR "     : [-d dataPath]          - Path to directory containing data files to import into new instance\n");
-        print(STDERR "     : [-v oldVersion]        - Version of old instance (obtained by running $slapdExecName -v\n");
-        print(STDERR "     : [-t tracelevel]        - (optional) specify the level of trace (0..3)\n");
-        print(STDERR "     : [-L logfile]           - (optional) specify the file to log the migration report \n");
-      }
-########################################################################################################
-
-BEGIN {
-  
-  require 'uname.lib' ;
-  $isNT = -d '\\';
-  $PATHSEP = $isNT ? "\\" : "/";
-  ${SEP} = $isNT ? ";" : ":" ; 
-  @INC = ( '.', '../../../admin/admin/bin');
-  grep { s@/@\\@g } @INC if $isNT;
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-  # NT needs quotes around some things unix doesn't
-  $quote = $isNT ? "\"" : "";
-
-  # If this variable is set, all file/directory creation will make sure the mode
-  # and ownership of the destination is the same as the source
-  $PRESERVE = 1 if (!$isNT);
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-    if ($isNT) {
-		$os = "WINNT";
-    } else {
-    	$os = &uname("-s");
-    }
-	if ($isNT) {
-		# we have to pass batch files directly to the NT command interpreter
-		$com_spec = $ENV{ComSpec};
-		if (!$com_spec) {
-			$com_spec = $ENV{COMSPEC};
-		}
-		if (!$com_spec || ! -f $com_spec) {
-			# find the first available command interpreter
-			foreach $drive (c..z) {
-				$com_spec = "$drive:\\winnt\\system32\\cmd.exe";
-				last if (-f $com_spec);
-				$com_spec = undef;
-			}
-			if (! $com_spec) {
-				# punt and pray
-				$com_spec = 'c:\winnt\system32\cmd.exe';
-			}
-		}
-	}
-    if ( $os eq "AIX" ) {
-		$dll_suffix = "_shr.a";
-    }	
-    elsif ( $os eq "HP-UX" ) {
-		$dll_suffix = ".sl";
-    }	
-    elsif ( $os eq "WINNT" ) {
-		$dll_suffix = ".dll";
-    }	
-    else {
-		$dll_suffix = ".so";
-    }	
-	$slapdExecName = $isNT ? 'slapd.exe' : './ns-slapd';
-	select STDERR;
-	$| = 1;
-	select STDOUT;
-	$| = 1;
-}
-
-SWITCH: {
-	    if ($os eq "AIX") {
-		$LIB_PATH = "LIBPATH" ;
-		last SWITCH ;
-	    }
-	    if ($os eq "HP-UX") {
-		$LIB_PATH = "SHLIB_PATH" ;
-		last SWITCH ;
-	    }
-	    if ($isNT) {
-                $LIB_PATH = "PATH" ;
-	        last SWITCH ;
-            }
-            else {
-                $LIB_PATH = "LD_LIBRARY_PATH" ;
-	        last SWITCH ;
-            }
-       }  
-
-  # old parameters
-  ${oldDir}         = "" ;                
-  ${oldname}        = "" ;             
-  ${oldHome}        = "" ;   
-  ${oldConfDir}     = "" ;
-  ${oldlocaluser} ;
-  ${olduid} ;
-  ${oldgid} ;
-
-  # new parameters            
-  ${root}           = "{{DS-ROOT}}" ;               
-  ${type}           = "" ;               
-  ${newname}        = "" ; 
-  ${newport}        = "" ;                                     
-  ${rootDN}         = "" ;
-  ${rootpwd}        = "" ;
-  ${localhost}      = "" ;
-  ${LogFileReport}  = "" ;
-  ${newuid} ;
-  ${localuser} ;
-  ${newgid} ;
-  $NO_INPUT_USER     = 0  ; # by default user can give inputs during the migration process
-  ${curdir}          = getCwd();
-  ${slapdExecDir}    = "${root}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-  # in 6.2 the replica Id is setup to a static value
-  $replicaIdvalue = 65535;
-
-  # specify the level of trace
-  $TRACELEVEL=1;
-
-  $LDAP_SERVER_UNREACHABLE = 81;
-
-  # get input users
-  &getParameters() ;
-  ${oldDir}          = &normalizeDir("${oldDir}");
-  ${oldHome}         = "${oldDir}${PATHSEP}$type-$oldname" ;    
-  ${oldConfDir}      = "${oldHome}${PATHSEP}config${PATHSEP}" ;
-  ${oldSchemaDir}    = "${oldConfDir}schema${PATHSEP}";
-  ${oldDSEldif}      = "${oldConfDir}dse.ldif";        
-  ${serverHome}      = "${root}${PATHSEP}$type-$newname" ;
-  ${schemaDir}       = "$serverHome${PATHSEP}config${PATHSEP}schema${PATHSEP}";
-  ${DSEldif}         = "$serverHome${PATHSEP}config${PATHSEP}dse.ldif";
-  ${ldif_rep}        = "${oldConfDir}ldif${PATHSEP}" ; 
-  ${oldSlapdExecDir} = "${oldDir}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-  
-  open(LOGFILE, ">> $LogFileReport");
-
-  printTrace("\noldDir: $oldDir, oldHome: $oldHome, \noldConfDir: $oldConfDir, \nldif_rep: $ldif_rep, \nrootDN: $rootDN, \nPort: $newport, \nNewname: $newname\n",3);
-  printTrace("\nLIB_PATH: $LIB_PATH",4);
-
-  if (!(-d $serverHome)) {
-    printMsg("\n$serverHome doesn't exist\n");
-    exit(1);
-  }
-  if (!(-d $oldHome)) {
-    printMsg("\n$oldHome doesn't exist\n");
-    exit(1);
-  }
-
-  if ($olddatadir && !(-d $olddatadir)) {
-    print("\n$olddatadir doesn't exist\n");
-    exit(1);
-  }
-
-
-%HashParametersName = ();
-
-# The following hash displays only general server parameters to migrate under cn=config
-%GeneralSrvParamToMigrate = (
-		       'nsslapd-accesscontrol'=> '\n',
-		       'nsslapd-errorlog-logging-enabled'=> '\n',
-		       'nsslapd-accesslog-logging-enabled'=> '\n',
-		       'nsslapd-auditlog-logging-enabled'=> '\n',
-		       'nsslapd-accesslog-level'=> '\n',
-		       'nsslapd-accesslog-logbuffering'=> '\n',
-		       'nsslapd-accesslog-logexpirationtime'=> '\n',
-		       'nsslapd-accesslog-logexpirationtimeunit'=> '\n',
-		       'nsslapd-accesslog-logmaxdiskspace'=> '\n',
-		       'nsslapd-accesslog-logminfreediskspace'=> '\n',
-		       'nsslapd-accesslog-logrotationtime'=> '\n',
-		       'nsslapd-accesslog-logrotationtimeunit'=> '\n',
-		       'nsslapd-accesslog-maxlogsize'=> '\n',
-		       'nsslapd-accesslog-maxLogsPerDir'=> '\n',
-		       'nsslapd-attribute-name-exceptions'=> '\n',
-		       'nsslapd-auditlog-logexpirationtime'=> '\n',
-		       'nsslapd-auditlog-logexpirationtimeunit'=> '\n',
-		       'nsslapd-auditlog-logmaxdiskspace'=> '\n',
-		       'nsslapd-auditlog-logminfreediskspace'=> '\n',
-		       'nsslapd-auditlog-logrotationtime'=> '\n',
-		       'nsslapd-auditlog-logrotationtimeunit'=> '\n',
-		       'nsslapd-auditlog-maxlogsize'=> '\n',
-		       'nsslapd-auditlog-maxLogsPerDir'=> '\n',
-		       'nsslapd-certmap-basedn'=> '\n',
-		       'nsslapd-ds4-compatible-schema'=> '\n',
-		       'nsslapd-enquote-sup-oc'=> '\n',
-		       'nsslapd-errorlog-level'=> '\n',
-		       'nsslapd-errorlog-logexpirationtime'=> '\n',
-		       'nsslapd-errorlog-logexpirationtimeunit'=> '\n',
-		       'nsslapd-errorlog-logmaxdiskspace'=> '\n',
-		       'nsslapd-errorlog-logminfreediskspace'=> '\n',
-		       'nsslapd-errorlog-logrotationtime'=> '\n',
-		       'nsslapd-errorlog-logrotationtimeunit'=> '\n',
-		       'nsslapd-errorlog-maxlogsize'=> '\n',
-		       'nsslapd-errorlog-maxlogsperdir'=> '\n',
-		       'nsslapd-groupevalnestlevel'=> '\n',
-		       'nsslapd-idletimeout'=> '\n',
-		       'nsslapd-ioblocktimeout'=> '\n',
-		       'nsslapd-lastmod'=> '\n',
-		       'nsslapd-listenhost'=> '\n',
-		       'nsslapd-maxdescriptors'=> '\n',
-		       'nsslapd-nagle'=> '\n',
-		       'nsslapd-readonly'=> '\n',
-		       'nsslapd-referralmode'=> '\n',
-		       'nsslapd-plugin-depends-on-name'=> '\n',
-		       'nsslapd-plugin-depends-on-type'=> '\n',
-		       'nsslapd-referral'=> '\n',
-		       'nsslapd-reservedescriptors'=> '\n',
-		       'nsslapd-rootpwstoragescheme'=> '\n',
-		       'nsslapd-schemacheck'=> '\n',
-		       'nsslapd-secureport'=> '\n',
-		       'nsslapd-security'=> '\n',
-		       'nsslapd-sizelimit'=> '\n',
-		       'nsslapd-ssl3ciphers'=> '\n',
-		       'nsslapd-timelimit'=> '\n',
-		       'passwordchange'=> '\n',
-		       'passwordchecksyntax'=> '\n',
-		       'passwordexp'=> '\n',
-		       'passwordhistory'=> '\n',
-		       'passwordinhistory'=> '\n',
-		       'passwordlockout'=> '\n',
-		       'passwordlockoutduration'=> '\n',
-		       'passwordmaxage'=> '\n',
-		       'passwordmaxfailure'=> '\n',
-		       'passwordminage'=> '\n',
-		       'passwordminlength'=> '\n',
-		       'passwordmustchange'=> '\n',
-		       'passwordresetfailurecount' => '\n',
-		       'passwordstoragescheme' => '\n',
-		       'passwordunlock' => '\n',
-		       'passwordwarning' => '\n'
-);
-
-# the following hash displays global parameters related to database stored under cn=config,cn=ldbm database,cn=plugins,cn=config
-%GlobalConfigLDBMparamToMigrate = (
-		       'nsslapd-allidsthreshold' => '\n',
-		       'nsslapd-lookthroughlimit' => '\n',
-		       'nsslapd-mode' => '\n',
-		       'nsslapd-dbcachesize' => '\n',
-		       'nsslapd-cache-autosize' => '\n',
-		       'nsslapd-cache-autosize-split' => '\n',
-		       'nsslapd-db-transaction-logging' => '\n',
-		       'nsslapd-import-cachesize' => '\n'
-);
-
-# the following hash displays specific parameters to each backends and  stored under cn=DBname,cn=ldbm database,cn=plugins,cn=config
-%LDBMparamToMigrate = (
-	           'nsslapd-cachesize' => '\n',
-		       'nsslapd-cachememsize' => '\n',
-		       'nsslapd-readonly' => '\n',
-		       'nsslapd-require-index' => '\n'
-);
-
-
-%ChainingConfigParams = (
-			 'nsactivechainingcomponents' => '\n',
-			 'nstransmittedcontrols' => '\n'
-			 );
-
-%ChainingDefaultInstanceConfigParams = (
-			 'nsabandonedsearchcheckinterval' => '\n',
-			 'nsbindconnectionslimit' => '\n',
-			 'nsbindtimeout' => '\n',
-			 'nsbindretrylimit' => '\n',
-			 'nshoplimit' => '\n',
-			 'nsmaxresponsedelay' => '\n',
-			 'nsmaxtestresponsedelay' => '\n',
-			 'nschecklocalaci' => '\n',
-			 'nsconcurrentbindlimit' => '\n',
-			 'nsconcurrentoperationslimit' => '\n',
-			 'nsconnectionlife' => '\n',
-			 'nsoperationconnectionslimit' => '\n',
-			 'nsproxiedauthorization' => '\n',
-			 'nsreferralonscopedsearch' => '\n',
-			 'nsslapd-sizelimit' => '\n',
-			 'nsslapd-timelimit' => '\n'
-);
-
-%changelog5params = (
-		     'nsslapd-changelogmaxage' => '\n',
-		     'nsslapd-changelogmaxentries' => '\n'
-		    );
-
-@SNMPparams = (
-	       'nssnmpenabled',
-	       'nssnmporganization', 
-	       'nssnmplocation',
-	       'nssnmpcontact',
-	       'nssnmpdescription',
-	       'nssnmpmasterhost',
-	       'nssnmpmasterport',
-	       'nssnmpenabled',
-	       'aci'
-	       );
-
-%stdIncludes = (
-		"."                        => "\n",
-		".."                       => "\n",
-		"30ns-common.ldif "        => "\n",
-		"50ns-mail.ldif "          => "\n",
-		"50ns-news.ldif"           => "\n",
-		"50iplanet-servicemgt.ldif"=> "\n",
-		"50netscape-servicemgt.ldif"=> "\n",
-		"50ns-mcd-browser.ldif"    => "\n",
-		"50ns-proxy.ldif"          => "\n",
-		"00core.ldif"              => "\n",
-		"50ns-admin.ldif"          => "\n",
-		"50ns-mcd-config.ldif "    => "\n",
-		"50ns-value.ldif"          => "\n",
-		"05rfc2247.ldif"           => "\n",
-		"50ns-calendar.ldif"       => "\n",
-		"50ns-mcd-li.ldif"         => "\n",
-		"50ns-wcal.ldif"           => "\n",
-		"05rfc2927.ldif"           => "\n",
-		"50ns-certificate.ldif"    => "\n", 
-		"50ns-mcd-mail.ldif"       => "\n", 
-		"50ns-web.ldif"            => "\n",
-		"10rfc2307.ldif"           => "\n",
-		"50ns-compass.ldif"        => "\n",
-		"50ns-media.ldif"          => "\n", 
-		"20subscriber.ldif"        => "\n",
-		"50ns-delegated-admin.ldif"=> "\n", 
-		"50ns-mlm.ldif"            => "\n",
-		"25java-object.ldif"       => "\n",
-		"50ns-directory.ldif"      => "\n", 
-		"50ns-msg.ldif"            => "\n",
-		"28pilot.ldif"             => "\n",
-		"50ns-legacy.ldif"         => "\n", 
-		"50ns-netshare.ldif"       => "\n"
-);
-
-
-# Backends migrated (Backend CN attribute value)
-@BACKENDS    = () ; 
-# All pairs of suffix-backend are registered in this hashtable
-%oldBackends = () ;
-
-#store the backend instances to migrate
-@LDBM_backend_instances = ();
-
-#store the mapping tree
-@Mapping_tree_entries = ();
-
-#store the suffix and the associated chaining backend
-%oldChainingBackends = ();
-
-#store the multiplexor bind entries to migrate
-%MultiplexorBindDNEntriesToMigrate = ();
-
-#store the Replica bind DN entries to migrate
-%ReplicaBindDNEntriesToMigrate = ();
-
-# list of standard plugins
-%stdPlugins = (
-	"7-bit check"                         =>        "\n",
-	"acl plugin"                          =>        "\n",
-	"acl preoperation"                    =>        "\n",
-	"binary syntax"                       =>        "\n",     
-	"case exact string syntax"            =>        "\n",
-	"case ignore string syntax"           =>        "\n",
-	"chaining database"                   =>        "\n",
-        "class of service"                    =>        "\n",
-        "country string syntax"               =>        "\n",
-	"distinguished name syntax"           =>        "\n",
-        "generalized time syntax"             =>        "\n",
-        "integer syntax"                      =>        "\n",
-        "internationalization plugin"         =>        "\n",
-        "ldbm database"                       =>        "\n",
-        "legacy replication plugin"           =>        "\n",
-        "multimaster replication plugin"      =>        "\n",
-        "octet string syntax"                 =>        "\n",
-        "clear"                               =>        "\n",
-        "crypt"                               =>        "\n",
-        "ns-mta-md5"                          =>        "\n",
-        "sha"                                 =>        "\n",
-        "ssha"                                =>        "\n",
-        "postal address syntax"               =>        "\n",
-        "referential integrity postoperation" =>        "\n",
-        "retro changelog plugin"              =>        "\n",
-        "roles plugin"                        =>        "\n",
-        "telephone syntax"                    =>        "\n",
-        "uid uniqueness"                      =>        "\n",
-        "uri syntax"                          =>        "\n"
-	      );
-
-# list of indexes that have disappeared from the new schema compared to 5.0
-%deniedIndexes = (
-	'dncomp' => "\n"
-);
-
-@default_indexes = ();
-@indexes = ();
-
-# list of user added Plugin's. In 6.2, they 'll need to be recompiled
-@badPlugins = () ;
-
-@pluginAttrs = (	  
-	       "objectclass",
-	       "cn",
-	       "nsslapd-pluginpath",
-	       "nsslapd-plugininitfunc",
-	       "nsslapd-plugintype",
-	       "nsslapd-pluginenabled",
-	       "nsslapd-plugin-depends-on-type",
-	       "nsslapd-pluginid",
-	       "nsslapd-pluginversion",
-	       "nsslapd-pluginvendor"
-	       );
-
-@nsds5replicaAttrs = (
-		      'objectclass',
-		      'nsDS5ReplicaRoot',
-		      'nsDS5ReplicaType',
-		      'nsDS5ReplicaLegacyConsumer',
-		      'nsDS5flags',
-		      'nsDS5ReplicaId',
-		      'nsDS5ReplicaPurgeDelay',
-		      'nsDS5ReplicaBinddn',
-		      'cn',
-		      'nsDS5ReplicaReferral'
-		      );
-
-# array of replicas to migrate
-@new6replicas = ();
-
-# array of replication agreements to migrate
-@replicationAgreements = ();
-
-# compare LDIF standard config files with standard ones
-CompareStdConfigFiles() ;
-die "\n\n The version of product you want to migrate is not a 5.x Directory Server\n" unless ($oldVersion == 5) ;
-
-# Shutdown the legacy Directory instance
-printTrace("\nShutdown the legacy Directory Server instance: ${oldHome}",0);
-&stopServer($oldDir, 'slapd-'.$oldname);
-
-# get the hostname of the new LDAP server
-my $LDAPservername = &getLDAPservername();
-
-# get the uid and gid of the 6.2 slapd user
-($localuser, $newuid, $newgid)    = getuid_gid();
-# get the uid and gid of the 5.x slapd user
-($oldlocaluser, $olduid, $oldgid) = getolduid_gid();
-printTrace("\n6.2 localuser: $localuser, uid: $newuid, gid: $newgid",2);
-printTrace("\n5.x localuser: $oldlocaluser, uid: $olduid, gid: $oldgid",2);
-
-# backup 6.2 configuration files in <6server_root>/slapd-instancename/config
-printTrace("\nBackup $serverHome${PATHSEP}config on $serverHome${PATHSEP}config_backup ...",0);
-&backupConfigFiles();
-
-# migrate the schema (need to stop and start the 6.2 server)
-printTrace("\nMigrate the schema...",0);
-MigrateSchema();
-
-# start the server unless it is already started
-&startServer() unless (isDirectoryAlive());
-
-###############  Connect to the 6.2 LDAP Directory Server  ######################
-$ENV{"$LIB_PATH"} = $new_libpath;
-
-die "\n Migration aborted. Make sure your old and new Directory Server are installed on the same machine \n" if ( $LDAPservername == -1 );
-$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-
-# Cconnection to 6.2 LDAP server is successful !
-printTrace("\nConnected to $Version.$Minor LDAP server",0) ;
-
-# Parse the main configuration file: dse.ldif
-printTrace("\n\nParse the old DSE ldif file: $oldDSEldif  *****",0, 1);
-printTrace("\nThis may take a while ...\n",0);
-&MigrateDSEldif();
-
-#migrate LDBM backend instances
-printTrace("\n\nMigrate LDBM backend instances...",0,1);
-&migrateLDBM_backend_instances();
-
-#migrate mapping tree entries
-printTrace("\n\nMigrate mapping tree...",0,1);
-&migrateMappingTree();
-
-#migrate default indexes
-printTrace("\n\nMigrate default indexes...",0,1);
-migrateDefaultIndexes();
-
-#migrate indexes
-printTrace("\n\nMigrate indexes...",0,1);
-migrateIndexes();
-
-#migrate replicas
-printTrace("\n\nMigrate replicas...",0,1);
-&MigrateNSDS5_replica();
-
-#migrate replication agreements
-printTrace("\n\nMigrate replication agreements...",0,1);
-&MigrateNSDS_replication_agreement();
-
-#migrate key/cert databases
-printTrace("\n\nMigrate key/cert databases...",0,1);
-&MigrateSSL(); 
-
-# migrate certmap.conf
-printTrace("\n\nMigrate Certmap.conf...",0,1);
-&MigrateCertmap() ;
-
-##################   Close the connection to 6.2 LDAP Server   #####################
-printTrace("\n\n***** Close the LDAP connection to the new Directory Server instance ***** ",0);
-$conn->close;
-
-
-################## stop the new instance and Export/Import the data, restart the server ##################
-if (@BACKENDS) {
-  &stopServer($root,'slapd-'.$newname);
-  if ($olddatadir) {
-	printTrace("\nData already contained in $olddatadir...\n",0,1) ;
-	$ldif_rep = "$olddatadir${PATHSEP}";
-  } else {
-	printTrace("\nData processing...\n",0,1) ;
-	# migrate data for each backend: 5.x -> LDIF files
-	&manydb2Ldif($ldif_rep);
-  }
-  
-  # migrate LDIF data to the new database: LDIF -> New
-  &manyLdif2db($ldif_rep);
-  &migrateChangelog();
-  printTrace("\n***** Migrate ReplicaBindDN entries...\n",0,1);
-  &importReplicaBindDNEntries();
-  printTrace("\n***** Migrate MultiplexorBindDN entries...\n",0,1);
-  &importMultiplexorBindDNEntries();
-  &startServer() unless (isDirectoryAlive());
-}
-else {
-  printTrace("\nINFORMATION - There are no non-standard or non-already existing suffixes to migrate\n",0);
-  &migrateChangelog();
-  printTrace("\n***** Migrate ReplicaBindDN entries...\n",0,1);
-  &importReplicaBindDNEntries();
-  printTrace("\n***** Migrate MultiplexorBindDN entries...\n",0,1);
-  &importMultiplexorBindDNEntries();
-}
-
-printMsg("\n\n  ******   End of migration   ******\n\n");
-
-close(LOGFILE);
-
-
-###########################################################################################
-# get input users
-sub getParameters {
-  my $exit = 0 ;
-  my $i    = 0;
-  my $pwdfile= "";
-
-  while ($i <= $#ARGV) {
-    if ( "$ARGV[$i]" eq "-D" ) { # directory manager
-      if (! $rootDN) {
-	$rootDN = $ARGV[++$i] ;
-      }
-      else {
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-w") { # password
-      if (! $rootpwd) {
-	$rootpwd = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-j") { # password file 
-      if (! $pwdfile) {
-	$pwdfile = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-o") { # old instance path
-       if (! $oldHome ) {
-	 $oldHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $oldHome if $isNT ;
-	 if ($oldHome =~ /[\"]?(.*)?[\"]?/) { $oldHome = $1 ; }
-	 if ($oldHome =~ m@^(.*)/([^-/]*)-([^/]*)[/]?$@) {
-	   $oldDir  = $1 ;
-	   $type    = $2 ;
-	   $oldname = $3 ;
-	   if ($isNT) {
-	     $oldDir  = lc($oldDir)     ;
-	     $type    = lc($type)       ;
-	     $oldname = lc($oldname)    ;
-	     $oldHome = lc($oldHome)    ;
-	     grep { s@/@\\@g } $oldDir  ;
-	     grep { s@/@\\@g } $oldHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe old instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-n") { # new instance path
-       if (! $serverHome ) {
-	 $serverHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $root if $isNT ;
-	 grep { s@\\@/@g } $serverHome if $isNT ;
-	 if ($serverHome =~ /[\"]?(.*)?[\"]?/) { $serverHome = $1 ; }
-	 if ($serverHome =~ m@^(.*?)/?([^/-]*)-([^/]*)[/]?$@) {
-	   $root    = $1 if ($1);
-	   $type    = $2 ;
-	   $newname = $3 ;
-	   if ($isNT) {
-	     $root       = lc($root)       ;
-	     $type       = lc($type)       ;
-	     $newname    = lc($newname)    ;
-	     $serverHome = lc($serverHome) ;
-	     grep { s@/@\\@g } $root       ;
-	     grep { s@/@\\@g } $serverHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe new instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-p") { # new DS port 
-      if (! $newport ) {
-	$newport = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-d") { # old instance LDIF data dir
-      if (! $olddatadir ) {
-	$olddatadir = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-v") { # old version
-      if (! $oldversionstr ) {
-	$oldversionstr = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-t") { # TRACELEVEL
-      my $value = $ARGV[++$i] ;	
-      if ($value =~ /[0-3]/) {
-	$TRACELEVEL = $value ;
-      }
-      else {
-	print("\nThe tracelevel must belong to 0..3 interval");
-        &usage();
-	exit();
-      }	
-    } elsif ("$ARGV[$i]" eq "-noinput") { # no user interventions during processing
-	$NO_INPUT_USER = 1 ;
-    } elsif ("$ARGV[$i]" eq "-L") { # migration logfile
-	$LogFileReport = $ARGV[++$i] ;
-    }
-    else {
-	print("\nThe option $ARGV[$i] is not recognized");
-	&usage() ;
-	exit(1);
-    }
-    $i++;
-  }
-  if (! $rootDN) {
-    print("\nThe rootDN is missing");
-    $exit = 1;
-  }
-  if ($pwdfile ne "") {
-    # Open file and get the password
-    unless (open (RPASS, $pwfile)) {
-      die "Error, cannot open password file $passwdfile\n";
-    }
-    $rootpwd = <RPASS>;
-    chomp($rootpwd);
-    close(RPASS);
-  } elsif ($rootpwd eq "-"){
-    # Read the password from terminal
-    die "The '-w -' option requires an extension library (Term::ReadKey) which is not\n",
-    "part of the standard perl distribution. If you want to use it, you must\n",
-    "download and install the module. You can find it at\n",
-    "http://www.perl.com/CPAN/CPAN.html\n";
-    # Remove the previous line and uncomment the following 6 lines once you have installed Term::ReadKey module.
-# use Term::ReadKey; 
-#	print "Bind Password: ";
-#	ReadMode('noecho'); 
-#	$rootpwd = ReadLine(0); 
-#	chomp($rootpwd);
-#	ReadMode('normal');
-  }
-  if (! $rootpwd) {
-    print("\nThe rootpwd is missing");
-    $exit = 1 ;
-  }
-  if (! $newport) {
-    print("\nThe port is missing");
-    $exit = 1;
-  }
-  if (! $serverHome) {
-    print("\nThe new instance path is missing");
-    $exit = 1;
-  }
-  if (! $oldHome) {
-    print("\nThe old instance path is missing");
-    $exit = 1;
-  }
-  if ((! $LogFileReport) && $serverHome) {
-    ($sec, $min, $hour, $dd, $mm, $yy) = &GetTime();
-    $LogFileReport  = "${serverHome}${PATHSEP}logs${PATHSEP}Migration_${dd}${mm}${yy}_${hour}${min}${sec}.log";
-  }
-  if ($exit) {	
-	&usage() ;
-	exit(1);
-  }
-  
-}
-
-###################################################################################################
-
-sub MigrateSchema{
-  my $FilesChanged = "";
-  my $AllDiffs     = "";
-  my $NoChanges    = "" ;
-  my $lineToBegin  = 0 ;
-  opendir(SCHEMADIR, $oldSchemaDir) or
-    die "Error: could not open migrated config dir $oldSchemaDir: $!";
-  
-  foreach $file (readdir(SCHEMADIR)) {
-      if (! exists($stdIncludes{lc($file)})) {
-	  my $newSchemaFile = $schemaDir . $file;
-	  if (-f $newSchemaFile ) {
-	      # The ldif file already exists. Make a diff and warn the user if different.
-	      if (diff($newSchemaFile, $oldSchemaDir.$file)) {
-		  &stopServer($root,'slapd-'.$newname) if (isDirectoryAlive());
-		  $AllDiffs .= "\n$file";
-		  copyBinFile("$oldSchemaDir$file", $newSchemaFile);
-	      }
-	  }
-	  else {
-	      &stopServer($root,'slapd-'.$newname) if (isDirectoryAlive());
-	      $AllDiffs .= "\n$file";
-	      copyBinFile("$oldSchemaDir$file", $newSchemaFile);
-	  }
-      }
-  }
-  closedir(SCHEMADIR);
-  if ($AllDiffs) {
-      printMsg("\n\n***********************************************************************");
-      printMsg("\nThe following LDIF files have been migrated:");
-      printMsg("$AllDiffs");
-      printMsg("\n*************************************************************************\n\n");
-  } 
-  &startServer() if (! isDirectoryAlive());
-}
-
-
-###################################################################################################
-# This subroutine is used to parse the dse.ldif file and call specific routines to act with entries
-sub MigrateDSEldif {
-  printTrace("\nMigrate DSE entries...",1);
-  my $tempoAlreadyDone = 0;
-  open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-  my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-   while ($entry = readOneEntry $in) {
-     $typeOfEntry = getTypeOfEntry($entry);
-     SWITCH: {
-	 if ($typeOfEntry eq "LDBM_BACKEND_INSTANCE"){
-	     parseLDBM_backend_instance($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "MAPPING_TREE"){
-	     parseMapping_tree($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "DEFAULT_INDEX"){
-	     parseDefaultIndex($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "INDEX"){
-	     parseIndex($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "STANDARD_PLUGIN"){
-	     migrateStdPlugin($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CONFIG_NODE"){
-	     migrateConfig_Node($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CONFIG_LDBM_DATABASE"){
-	     migrateConfig_LDBM_database($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CHAINING_BACKEND_CONFIG"){
-	     migrateChainingBE_config($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CHAINING_BACKEND_INSTANCE"){
-	     migrateChainingBE_instance($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "NSDS5_REPLICA"){
-	     parseNSDS5_replica($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "NSDS_REPLICATION_AGREEMENT"){
-	     parseNSDS_replication_agreement($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "CHANGELOG5"){
-	     migrateChangelog5($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "REPLICATION"){
-	     migrateReplication($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "SECURITY"){
-	     migrateSecurity($entry);
-	     last SWITCH;
-	 }
-	 if ($typeOfEntry eq "SNMP"){
-	     migrateSNMP($entry);
-	     last SWITCH;
-	 }
-     }
-
-   }
-   close(DSELDIF);
-}
-
-#############################################################################
-# returns the "type of an entry". If the entry is not to be migrated its type is "NOT_MIGRATED_TYPE"
-
-sub getTypeOfEntry{
-    my $entry = shift;
-    my $DN = $entry->getDN(1) ; # 1 is to normalize the returned DN 
-    if (($DN =~ /cn=ldbm database,cn=plugins,cn=config$/i) && (isObjectclass($entry,"nsBackendInstance"))) {
-	return "LDBM_BACKEND_INSTANCE";
-    }
-    if (($DN =~ /cn=mapping tree,cn=config$/i) && (isObjectclass($entry,"nsMappingTree"))) {
-	return "MAPPING_TREE";
-    }
-    if (($DN =~ /cn=default indexes,cn=config,cn=ldbm database,cn=plugins,cn=config$/i) && (isObjectclass($entry,"nsIndex"))) {
-        return "DEFAULT_INDEX";
-    }
-    if (isObjectclass($entry,"nsIndex")) {
-        return "INDEX";
-    }
-    if ((isObjectclass($entry,"nsSlapdPlugin")) && (isStdPlugin($entry))) {
-        return "STANDARD_PLUGIN";
-    }
-    if ($DN =~ /^cn=config$/i) {
-        return "CONFIG_NODE";
-    }
-    if ($DN =~ /^cn=config,cn=ldbm database,cn=plugins,cn=config$/i) {
-        return "CONFIG_LDBM_DATABASE";
-    }
-    if (($DN =~ /^cn=config,cn=chaining database,cn=plugins,cn=config$/i) || ($DN =~ /^cn=default instance config,cn=chaining database,cn=plugins,cn=config$/i)){
-        return "CHAINING_BACKEND_CONFIG";
-    }	   
-    if (($DN =~ /cn=chaining database,cn=plugins,cn=config$/i) && (isObjectclass($entry,"nsBackendInstance"))) {
-        return "CHAINING_BACKEND_INSTANCE";
-    } 
-    if (isObjectclass($entry,"nsDS5Replica")) {
-        return "NSDS5_REPLICA";
-    }
-    if (isObjectclass($entry,"nsDS5ReplicationAgreement")) {
-        return "NSDS_REPLICATION_AGREEMENT";
-    }
-    if ($DN =~ /^cn=changelog5,cn=config$/i) {
-        return "CHANGELOG5";
-    }
-    if (($DN =~ /cn=replication,cn=config$/i) && ($DN !~ /^cn=replication,cn=config$/i)) {
-        return "REPLICATION";
-    }
-    if ($DN =~ /cn=encryption,cn=config$/i) {
-        return "SECURITY";
-    }
-    if ($DN =~ /^cn=SNMP,cn=config$/i) {
-        return "SNMP";
-    }
-    return "NOT_MIGRATED_TYPE";
-}
-
-#############################################################################
-
-
-
-#############################################################################
-# returns 1 if the objectclass given in parameter is present in the objectclasses values of the entry 
-# given in parameter, 0 else
-
-sub isObjectclass {
-    my $entry       = shift;
-    my $objectclass = shift;
-    return ($entry->hasValue("objectclass",$objectclass,1));
-}
-
-#############################################################################
-
-sub isStdPlugin {
-    my $entry = shift;
-    my $CN    = $entry->{cn}[0];
-    if (isObjectclass($entry,"nsSlapdPlugin")) {
-	return 1 if ($stdPlugins{lc($CN)});
-    }
-    return 0;
-}
-
-
-#############################################################################
-
-sub alreadyExistsInNew{
-    my $entry     = shift;
-    my $mustExist = shift;
-    my $DN    = $entry->getDN(1); # 1 to normalize the DN
-    # We have a name change of "uid uniqueness" plugin in DS6.x
-    # to "attribute uniqueness"
-    $DN =~ s/uid\ uniqueness/attribute\ uniqueness/ if ($DN =~ /uid\ uniqueness/);
-    return searchEntry($DN, $mustExist);
-}
-
-#############################################################################
-sub searchEntry {
-    my $DN          = shift;
-    my $mustExist   = shift;
-    my $res         = $conn->search($DN, "base", "objectclass=*");
-    my $cpt         = 5;
-    if ($res) {
-	return $res;
-    }
-    else {
-	my $errorCode = $conn->getErrorCode();
-	while (($errorCode eq $LDAP_SERVER_UNREACHABLE) && cpt && (! $res)) {
-	    printMsg("\ntry to reconnect to search $DN");
-	    $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	    $res  = $conn->search($DN, "base", "objectclass=*");
-	    $errorCode = $conn->getErrorCode();	 
-	    $cpt--;
-	}
-	if ($res){
-	    return $res ;   
-	}
-	elsif (($errorCode eq $LDAP_SERVER_UNREACHABLE) || ($mustExist)) {  
-	    my $msg = $conn->getErrorString();
-	    printMsg("\n\n*** Failed to search: $DN");
-	    printMsg("\n*** Error Msg: $msg, Error code: $errorCode");
-	}
-	return 0;
-    }
-}
-
-
-#############################################################################
-
-sub addEntryToNew{
-    my $entry          = shift;
-    my $typeOfEntry = shift;
-    my $trace          = shift;
-    my $res            = $conn->add($entry);
-    my $DN             = $entry->getDN(1);
-    my $cpt            = 5;
-    if ($res) {
-	printTrace("\n$typeOfEntry - Add successfull: $DN",$trace);
-	return 1;
-    }
-    else {
-	my $errorCode = $conn->getErrorCode();
-	while (($errorCode eq $LDAP_SERVER_UNREACHABLE) && cpt && (! $res)) {
-	    printMsg("\ntry to reconnect to add $DN");
-	    $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	    $res  = $conn->add($entry);
-	    $errorCode = $conn->getErrorCode();	 
-	    $cpt--;
-	}
-	if ($res){
-	    printTrace("\n$typeOfEntry - Add successfull: $DN",$trace);
-	    return 1;   
-	}
-	else {  
-	    my $msg = $conn->getErrorString();
-	    printMsg("\n\n*** $typeOfEntry: Add Failed: $DN");
-	    printMsg("\n*** Error Msg: $msg, Error code: $errorCode");
-	    return 0;
-	}
-    }
-}
-
-#############################################################################
-
-sub updateEntry{
-    my $entry       = shift;
-    my $typeOfEntry = shift;
-    my $CHECK       = shift;
-    my $trace       = shift;
-    my $cpt         = 5;
-    if ($CHECK) {
-	if (! hasChanged($entry, $typeOfEntry)) {
-	    return 1;
-	}
-    }
-    my $res = $conn->update($entry);
-    my $DN  = $entry->getDN(1);
-    if ($res) {
-	printTrace("\n$typeOfEntry - Update successfull: $DN",$trace);
-	return 1 ;
-    }
-    else {
-	my $errorCode = $conn->getErrorCode();
-	while (($errorCode eq $LDAP_SERVER_UNREACHABLE) && cpt && (! $res)) {
-	    printMsg("\ntry to reconnect to update $DN");
-	    $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	    $res  = $conn->update($entry);
-	    $errorCode = $conn->getErrorCode();	 
-	    $cpt--;
-	}
-	if ($res){
-	    printTrace("\n$typeOfEntry - Update successfull: $DN",$trace);
-	    return 1;   
-	}
-	else {  
-	    my $msg = $conn->getErrorString();
-	    printMsg("\n\n*** $typeOfEntry - Update Failed: $DN");
-	    printMsg("\n*** Error Msg: $msg, Error code: $errorCode");
-	    return 0;
-	}
-    }
-}
-	
-
-#############################################################################
-# returns 1 if the entry to migrate and the current entry are different one another
-
-sub hasChanged {
-    my $entry       = shift;
-    my $typeOfEntry = shift;
-    my $DN          = $entry->getDN(1);
-    my $newEntry  = searchEntry($DN,1);
-    return 1 if (! $newEntry); # we shoudn't be in that case ...
-    # do the stuff to check wether the entry has changed or not given its type
-    if (($typeOfEntry eq "DEFAULT_INDEX") || ($typeOfEntry eq "INDEX")){
-	my @indexTypes           = $entry->getValues("nsIndexType");
-	my @newIndexTypes      = $newEntry->getValues("nsIndexType");
-	my @nsmatchingrules      = $entry->getValues("nsmatchingrule");
-	my @newMatchingRules = $newEntry->getValues("nsmatchingrule");
-	return 1 if (Diffs(\@indexTypes, \@newIndexTypes));
-	return 1 if (Diffs(\@nsmatchingrules,\@newMatchingRules));
-	return 0;
-    }
-    if ($typeOfEntry eq "CHANGELOG5"){
-	printTrace("\nCheck wether changelog has changed or not",3);
-	my @params = keys(%changelog5params);
-	foreach $param (@params){
-	    my @values      = $entry->getValues($param);
-	    my @newValues = $newEntry->getValues($param);
-	    return 1 if (Diffs(\@values,\@newValues));   
-	}
-	return 0;
-    }
-    if ($typeOfEntry eq "SNMP"){
-	foreach $param (@SNMPparams){
-	    my @values      = $entry->getValues($param);
-	    my @newValues = $newEntry->getValues($param);
-	    return 1 if (Diffs(\@values,\@newValues));   
-	}
-	return 0;
-    }
-    # we don't know how to compare such type of entry => just return 1
-    return 1 ;
-}
-
-sub isAsystemIndex {
-    my $index = shift;
-    return ($index->hasValue("nsSystemIndex","true",1));
-}
-
-
-sub updatePathInPluginArgs {
-    my $plugin       = shift;
-    my $argNum       = 0;
-    my $argPrefix    = "nsslapd-pluginarg";
-    my $cont         = 1;
-    my $Unix_oldDir  = ${oldDir} ;
-    my $Unix_root    = ${root} ;
-    grep { s@\\@/@g } $Unix_oldDir if $isNT;
-    grep { s@\\@/@g } $Unix_root   if $isNT;
-    while ($cont) {
-	my $arg = $argPrefix . $argNum ;
-	if ($plugin->exists($arg)) {
-	    $_ = $plugin->{$arg}[0] ;
-	    s@$Unix_oldDir@$Unix_root@ig ;
-	    s/$type-$oldname/$type-$newname/ig ;
-	    $plugin->setValues($arg, $_) ;
-	}
-	else {
-	    $cont = 0 ;
-	}
-	$argNum++;
-    }
-    return $plugin;
-} 
-
-
-sub Diffs {
-    my $valuesToMigrate = shift;
-    my $currentValues   = shift;
-    return 1 if (getDiff(\@{$valuesToMigrate},\@{$currentValues}));
-    return 1 if (getDiff(\@{$currentValues},\@{$valuesToMigrate}));
-    return 0 ;
-}
-
-sub getDiff {
-    # we get references to arrays
-    my $elements = shift ; 
-    my $existing_elements = shift ;
-    my %count   = () ;
-    my %countEE = () ;
-    @diff       = () ;
-    foreach $e (@{$elements}, @{$existing_elements}) { $count{$e}++ ;}
-    foreach $e (@{existing_elements}) { $countEE{$e}++ ;}
-    foreach $e (@{$elements}) {
-	# if $e is only present in @$elements, we push it to the diff array
-	if (($count{$e} == 1) && ($countEE{$e} == 0)) {
-	    push @diff, $e ;
-	}
-    }
-    return @diff ;
-}
-
-sub registerSuffix_Backend {
-    my $ldbmDatabase      = shift;
-    my $CN                = $ldbmDatabase->{cn}[0];
-    my $suffixArg         = "nsslapd-suffix";
-    my $suffix            = $ldbmDatabase->{$suffixArg}[0];
-    $oldBackends{$suffix} = $CN;
-}
-
-
-#############################################################################
-#                                                                           #
-#                                                                           #
-#                                                                           #
-#############################################################################
-sub migrateLDBM_backend_instances {
-    foreach $entry (@LDBM_backend_instances) {
-	my $DN    = $entry->getDN(1); # 1 is to normalize the DN
-	my $CN    = $entry->{cn}[0];
-	my $expLdif;
-	my $confirm = "No";
-	my $dest = "$serverHome${PATHSEP}db_backup" ;
-	my $newSlapdExecDir = "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server";
-
-	if ($DN =~/cn=netscaperoot,cn=ldbm database/i){
-	    printTrace("\n\n*** INFORMATION - NetscapeRoot is NOT migrated",0);
-	}
-	else {
-	    if(alreadyExistsInNew($entry)){
-		printMsg("\n\n*** LDBM_BACKEND_INSTANCE - $DN already exists");
-		printMsg("\n*** Migration will overwrite existing database");
-		printMsg("\nDo you want to continue Yes/No [No] ?") ;
-		my $answer = <STDIN> ;
-		if ($answer =~ /y|yes/i) {
-			printMsg("Do you want to export the existing data Yes/No [Yes] ?");
-			my $answer = <STDIN> ;
-			if (!($answer =~ /n|no/i)) {
-				mkdir $dest, 0700 unless (-d $dest);
-				$expLdif = "$dest${PATHSEP}$CN.ldif";
-				while (!($confirm =~ /y|yes/i)) {
-					printMsg("\nEnter the full pathname of the file [$expLdif]:") ;
-					$answer = <STDIN> ;
-					chomp($expLdif = $answer) unless ($answer eq "\n");
-					printMsg("\nExisting data will be exported under $expLdif");
-					printMsg("\nContinue Yes/No [No] ?");
-					$confirm = <STDIN>;
-				}
-				$ENV{"$LIB_PATH"}=$new_libpath;
-				chdir($newSlapdExecDir) or die "\nCould not change directory to $newSlapdExecDir: $!\n";
-				printTrace("\nNow backing up database $CN in $expLdif\n",0);
-				&stopServer($root,'slapd-'.$newname);
-				&db2Ldif($expLdif, $CN, $serverHome);
-				&startServer() unless (isDirectoryAlive());
-				}
-				push @BACKENDS, $CN;
-		} else {
-		printMsg("\n*** Migration will not update it");
-		break;
-	    }
-	    } else {
-		printTrace("\nWe should add the backend instance $DN",3);
-		my $suffixarg = "nsslapd-suffix" ;
-		my $suffixname= $entry->{$suffixarg}[0] ;
-		my $newEntry = $conn->newEntry() ;
-		$newEntry->setDN($DN);
-		$newEntry->setValues("objectclass", "top", "extensibleObject", "nsBackendInstance" );
-		$newEntry->setValues("cn", $CN );
-		$newEntry->setValues($suffixarg, $suffixname);
-		my @params = keys(%LDBMparamToMigrate);
-		foreach $param (@params) {
-		    my @values = $entry->getValues($param);
-		    $newEntry->setValues($param, @values) if (@values);
-		}
-		if (addEntryToNew($newEntry,  "LDBM_BACKEND_INSTANCE",1)) {
-		    push @BACKENDS, $CN;
-		}
-	    }
-	}       
-    }
-}
-
-sub parseLDBM_backend_instance {
-    my $entry = shift;
-    &registerSuffix_Backend($entry);
-    push @LDBM_backend_instances, $entry;
-}
-
-#############################################################################
-sub migrateMappingTree {
-    foreach $entry (@Mapping_tree_entries) {
-	my $DN    = $entry->getDN(1); # 1 si to normalize the DN
-	if ($DN =~/cn=\"o=netscaperoot\",cn=mapping tree,cn=config/i){
-	    # DO NOTHING
-	}
-	else {
-	    if(alreadyExistsInNew($entry)){
-		printMsg("\n\n*** MAPPING_TREE - $DN already exists");
-		printMsg("\n*** Migration will not add the suffix");
-	    }
-	    else {
-		addEntryToNew($entry, "MAPPING_TREE",1);
-	    }
-	}
-    }
-}
-
-	    
-sub parseMapping_tree{
-    my $entry = shift;
-    push @Mapping_tree_entries, $entry;
-}
-
-#############################################################################
-sub migrateDefaultIndexes {
-    foreach $index (@default_indexes) {
-	my $CN    = $index->{cn}[0];
-	my $newIndex ;
-	if ((! isAsystemIndex($index)) && (! $deniedIndexes{lc($CN)})) {
-	    if ($newIndex = alreadyExistsInNew($index)) {
-		if (! isAsystemIndex($newIndex)) {
-		    updateEntry($index, "DEFAULT_INDEX", 1, 2);
-		}
-	    }
-	    else {
-		addEntryToNew($index, "DEFAULT_INDEX", 2);
-	    }
-	}
-    }
-}
-
-
-sub parseDefaultIndex{
-    my $index = shift;
-    push @default_indexes, $index;
-}
-
-#############################################################################
-
-sub migrateIndexes {
-    foreach $index (@indexes) {
-	my $CN    = $index->{cn}[0];
-	my $newIndex;
-	if ((! isAsystemIndex($index)) && (! $deniedIndexes{lc($CN)}) && (DN !~ /cn=netscaperoot,cn=index/i)){
-	    if ($newIndex = alreadyExistsInNew($index)) {
-		if (! isAsystemIndex($newIndex)) {
-		    updateEntry($index, "INDEX", 1, 2);
-		}
-	    }
-	    else {
-		addEntryToNew($index, "INDEX", 2);
-	    }
-	}
-    }
-}
-
-sub parseIndex{
-    my $index = shift;
-    push @indexes, $index;
-}
-
-#############################################################################
-
-sub newLDIFplugin {
-    my $currentPlugin = shift;
-    my $DN              = $currentPlugin->getDN(1);
-    my $newPlugin     = $conn->newEntry() ;
-    $newPlugin->setDN($DN);
-    foreach $Attr (@pluginAttrs) {
-    	my @values = $currentPlugin->getValues($Attr);
-       	$newPlugin->setValues($Attr, @values) if (@values);
-    }
-    return $newPlugin;
-}
-
-sub migrateStdPlugin{
-    my $plugin           = shift;
-    my $DN               = $plugin->getDN(1);
-    my $pluginEnable     = "nsslapd-pluginEnabled";
-    my $argNum           = 0;
-    my $argPrefix        = "nsslapd-pluginarg";
-    my $currentPlugin ;
-    if ($currentPlugin = alreadyExistsInNew($plugin, 1)) {
-	$plugin                 = updatePathInPluginArgs($plugin);
-	my $pluginEnableValue   = $plugin->{$pluginEnable}[0];
-	my $cont                = 1;
-	my $pluginHasChanged    = 0;
-	my $newPlugin         = &newLDIFplugin($currentPlugin);
-	if (! $currentPlugin->hasValue($pluginEnable,$pluginEnableValue,1)){
-	    $newPlugin->setValues($pluginEnable, $pluginEnableValue);
-	    $pluginHasChanged = 1 unless ($pluginHasChanged);
-	}
-	while($cont){
-	     my $arg = $argPrefix . $argNum ;
-	     if ($plugin->exists($arg)) {
-		 my @values = $plugin->getValues($arg);
-		 my $value  = $values[0] ;
-		 $newPlugin->setValues($arg, $value) if (@values);
-		 if ($currentPlugin->exists($arg)) {
-		     if (! $currentPlugin->hasValue($arg,$value,1)) {
-			 $pluginHasChanged = 1 unless ($pluginHasChanged);
-		     }
-		 }
-		 else {
-		     $pluginHasChanged = 1 unless ($pluginHasChanged);
-		 }
-	     }
-	     else {
-		 if ($currentPlugin->exists($arg)) {
-		     # Just Warn the user. Do nothing. 
-		     printTrace("\nCompared to the old instance, the current new plugin $DN belongs this attribute: $arg",2);
-		 }
-		 else {
-		     $cont = 0 ;
-		 }
-	     }
-	     $argNum++;
-	}
-	updateEntry($newPlugin, "STANDARD_PLUGIN", 0, 1) if ($pluginHasChanged);
-    }
-}
-
-#############################################################################
-	
-sub migrateConfig_Node{
-    my $config_node = shift;
-    my @params      = keys(%GeneralSrvParamToMigrate);
-    my $hasChanged  = 0;  
-    my $newConfigNode;
-    if ($newConfigNode = alreadyExistsInNew($config_node, 1)){	
-	foreach $param (@params) {
-	    if ($config_node->exists($param)){
-		my @valuesToMigrate = $config_node->getValues($param);
-		if (@valuesToMigrate){
-		    if ($newConfigNode->exists($param)){
-			my @currentValues   = $newConfigNode->getValues($param); 
-			if (Diffs(\@valuesToMigrate, \@currentValues)) {
-			    $newConfigNode->setValues($param, @valuesToMigrate);
-			    $hasChanged = 1 unless ($hasChanged);
-			    printTrace("\nParam to update: $param with value @valuesToMigrate",3);
-			}
-		    }
-		    else {
-			$newConfigNode->setValues($param, @valuesToMigrate);
-			$hasChanged = 1 unless ($hasChanged);
-			printTrace("\nParam to update: $param with value @valuesToMigrate",3);
-		    }
-		}
-	    }
-	}
-	updateEntry($newConfigNode, "CONFIG_NODE", 0, 1) if ($hasChanged); 
-    }
-}
-
-#############################################################################
-
-sub migrateConfig_LDBM_database{
-    my $config_ldbm = shift;
-    my @params      = keys(%GlobalConfigLDBMparamToMigrate);
-    my $hasChanged  = 0;
-    my $newConfigLdbm ;
-    if ($newConfigLdbm = alreadyExistsInNew($config_ldbm, 1)) {
-	foreach $param (@params) {
-	    if ($config_ldbm->exists($param)){
-		my @valuesToMigrate = $config_ldbm->getValues($param);
-		if (@valuesToMigrate){
-		    if ($newConfigLdbm->exists($param)){
-			my @currentValues   = $newConfigLdbm->getValues($param); 
-			if (Diffs(\@valuesToMigrate, \@currentValues)) {
-			    $newConfigLdbm->setValues($param, @valuesToMigrate);
-			    $hasChanged = 1 unless ($hasChanged);
-			}
-		    }
-		    else {
-			$newConfigLdbm->setValues($param, @valuesToMigrate);
-			$hasChanged = 1 unless ($hasChanged);
-		    }
-		}
-	    }
-	}
-	updateEntry($newConfigLdbm, "CONFIG_LDBM_DATABASE", 0, 1) if ($hasChanged); 
-    }
-}
-
-#############################################################################
-
-sub migrateChainingBE_config{
-    my $chaining_config = shift;
-    my $DN              = $chaining_config->getDN(1);
-    my @params          = ();
-    my $hasChanged      = 0;
-    my $newChainingConfig;
-    if ($DN =~ /^cn=config,cn=chaining database,cn=plugins,cn=config$/i){
-	$newChainingConfig = searchEntry("cn=config,cn=chaining database,cn=plugins,cn=config");
-	@params = keys(%ChainingConfigParams);
-    }
-    if ($DN =~ /^cn=default instance config,cn=chaining database,cn=plugins,cn=config$/i){
-	$newChainingConfig = searchEntry("cn=default instance config,cn=chaining database,cn=plugins,cn=config");
-	@params = keys(%ChainingDefaultInstanceConfigParams);
-    }
-    foreach $param (@params) {
-	if ($chaining_config->exists($param)){
-	    my @valuesToMigrate = $chaining_config->getValues($param);
-	    if (@valuesToMigrate){
-		printTrace("\nParam: $param values To migrate: @valuesToMigrate",3);
-		if ($newChainingConfig->exists($param)){
-		    my @currentValues   = $newChainingConfig->getValues($param); 
-		    printTrace("\nParam: $param new current values: @currentValues",3);
-		    if (Diffs(\@valuesToMigrate, \@currentValues)) {
-			$newChainingConfig->setValues($param, @valuesToMigrate);
-			$hasChanged = 1 unless ($hasChanged);
-		    }
-		}
-		else {
-		    $newChainingConfig->setValues($param, @valuesToMigrate);
-		    $hasChanged = 1 unless ($hasChanged);
-		}
-	    }
-	}
-    }
-    updateEntry($newChainingConfig, "CHAINING_BACKEND_CONFIG", 0, 1) if ($hasChanged);
-}
-
-#############################################################################
-
-sub registerSuffix_ChainingBE {
-    my $ldbmDatabase      = shift;
-    my $CN                = $ldbmDatabase->{cn}[0];
-    my $suffixArg         = "nsslapd-suffix";
-    my $suffix            = $ldbmDatabase->{$suffixArg}[0];
-    $oldChainingBackends{$suffix} = $CN;
-}
-
-sub storeMultiplexorBindDN {
-    my $chaining_instance = shift;
-    my $DN      = $chaining_instance->getDN(1);
-    if ($chaining_instance->exists("nsMultiplexorBindDN")){
-	my $bindDN   = $chaining_instance->{nsMultiplexorBindDN}[0];
-	my $newBindDN = searchEntry($bindDN);
-	if (! $newBindDN){
-	    # the bindDN entry doesn't yet exist in new => it will have to be migrated
-	    $MultiplexorBindDNEntriesToMigrate{$bindDN}="\n" ;
-	    printTrace("\nThe bindDN: $bindDN need to be migrated",3);
-	}
-	else {
-	    # do nothing as the entry already exists in new
-	}
-    }
-    
-}
-
-sub importMultiplexorBindDNEntries {
-    # import all entries present in @MultiplexorBindDNEntriesToMigrate in new
-    my @MultiplexorBindDNs = keys (%MultiplexorBindDNEntriesToMigrate);
-    my $ldif_dir       = $ldif_rep;
-    foreach $bindDN (@MultiplexorBindDNs) {
-	printTrace("\nimportMultiplexorBindDNEntries: bindDN to migrate: $bindDN",3);
-	# get the backend in which is stored the bind DN entry
-	my $backendtoExportFrom = getBackendtoExportFrom($bindDN);
-	printTrace("\nbackendtoExportFrom is: $backendtoExportFrom",3);
-	# check wether the backend has been imported in new or not
-	if (! alreadyMigrated($backendtoExportFrom)) {
-	    if ($backendtoExportFrom ne $NULL) {
-                # if not imported => we need to import the binf DN entry
-		&startServer() unless (isDirectoryAlive());
-		$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 	
-		&ExportAndAddEntry($bindDN, $backendtoExportFrom, $ldif_dir);
-	    }
-	    else {
-		# do nothing
-	    }
-	}
-    }
-    # remove the empty ldif directory 
-    rmdir($ldif_dir) if (-d $ldif_dir);
-    # close the LDAP connection to new
-    $conn->close if ($conn);
-}
-
-sub migrateChainingBE_instance{
-    my $chaining_instance   = shift;
-    my $DN                  = $chaining_instance->getDN(1);
-    &registerSuffix_ChainingBE($chaining_instance);
-    if (alreadyExistsInNew($chaining_instance)) {
-	# already exists
-	printMsg("\n\n*** CHAINING_BACKEND_INSTANCE - $DN already exists");
-	printMsg("\n*** Migration will not update it");
-    }
-    else {
-	&migrate_credential($chaining_instance, "nsmultiplexorcredentials");
-	addEntryToNew($chaining_instance, "CHAINING_BACKEND_INSTANCE", 1);
-	storeMultiplexorBindDN($chaining_instance);
-    }
-}
-
-#############################################################################
-	  
-# create a new LDIF representation of a new replica consumer 
-sub newLDIFreplica {
-    my $replica               = shift;
-    my $DN                    = $replica->getDN(1);
-    my $newReplica          = $conn->newEntry() ;
-    my $MASTER_OR_MULTIMASTER = "3" ;
-    $newReplica->setDN($DN);
-    foreach $Attr (@nsds5replicaAttrs) {
-    	my @values = $replica->getValues($Attr);
-       	$newReplica->setValues($Attr, @values) if (@values);
-    }
-    my $replicaType = $replica->{nsDS5ReplicaType}[0];
-    if ($replicaType eq $MASTER_OR_MULTIMASTER) {
-	my @nsState    = $replica->getValues("nsState");
-	$newReplica->setValues("nsState", @nsState);
-    }
-    else {
-	$newReplica->setValues("nsDS5ReplicaId", $replicaIdvalue);
-    }
-    return $newReplica;
-}
-
-sub MigrateNSDS5_replica{
-    foreach $replica (@new6replicas) {
-	my $DN = $replica->getDN(1);
-	my $newReplica;
-        my @removeAttrs   = qw(nsstate nsds5replicaname nsds5replicachangecount);
-        for (@removeAttrs) {
-            $replica->remove($_);
-        }
-	if (alreadyExistsInNew($replica)) {
-	    # replica already exists
-	    printMsg("\n\n*** NSDS5_REPLICA - $DN already exists");
-	    printMsg("\n*** Migration will not update it");
-	}
-	else {
-	    $newReplica = &newLDIFreplica($replica);
-	    addEntryToNew($newReplica, "NSDS5_REPLICA", 1);
-	}
-	storeReplicaBindDN($replica);
-    }
-}
-
-sub parseNSDS5_replica{
-    my $replica               = shift;
-    push @new6replicas, $replica;
-}
-
-sub storeReplicaBindDN {
-    my $replica = shift;
-    my $DN      = $replica->getDN(1);
-    if ($replica->exists("nsDS5ReplicaBindDN")){
-	my $bindDN   = $replica->{nsDS5ReplicaBindDN}[0];
-	my $newBindDN = searchEntry($bindDN);
-	if (! $newBindDN){
-	    # the bindDN entry doesn't yet exist in new => it will have to be migrated
-	    $ReplicaBindDNEntriesToMigrate{$bindDN}="\n" ;
-	    printTrace("\nThe bindDN: $bindDN need to be migrated",3);
-	}
-	else {
-	    # do nothing as the entry already exists in new
-	}
-    }
-}
-
-
-sub importReplicaBindDNEntries {
-    # import all entries present in @ReplicaBindDNEntriesToMigrate in new
-    my @ReplicaBindDNs = keys (%ReplicaBindDNEntriesToMigrate);
-    my $ldif_dir       = $ldif_rep;
-    my $replBind_entry   = "";
-    my @bindDN_elements  = "";
-    my $bindDN_parent    = "";
-    my $parentBind_entry = "";
-    foreach $bindDN (@ReplicaBindDNs) {
-	printTrace("\nimportReplicaBindDNEntries: bindDN to migrate: $bindDN",3);
-	# get the backend in which is stored the bind DN entry
-	my $backendtoExportFrom = getBackendtoExportFrom($bindDN);
-	printTrace("\nbackendtoExportFrom is: $backendtoExportFrom",3);
-        # If backend is from config, read the entry from dse.ldif and add to new - NGK
-        if ($backendtoExportFrom eq "cn=config") {
-            my $norm_bindDN = normalizeDN($bindDN);
-            @bindDN_elements = ldap_explode_dn($norm_bindDN, 0);
-#            @bindDN_elements = split(/,/,$norm_bindDN);
-            my $junk = shift(@bindDN_elements);
-            if ($#bindDN_elements >= 1) {
-                $bindDN_parent = normalizeDN(join(",", @bindDN_elements));
-            }
-            printTrace("\nOpening DSE.ldif",3);
-            open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-            my $in = new Mozilla::LDAP::LDIF(*DSELDIF);
-            while ($entry = readOneEntry $in) {
-                my $DN = $entry->getDN(1);
-                if ($DN eq $norm_bindDN) {
-                    $replBind_entry = $entry;
-                }
-                if ($bindDN_parent ne "") {
-                    if ($DN eq $bindDN_parent) {
-                        $parentBind_entry = $entry;
-                    }
-                }
-            }
-            close(DSELDIF);
-            &startServer() unless (isDirectoryAlive());
-            $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n";
-            if ($bindDN_parent ne "") {
-                addEntryToNew($parentBind_entry, BINDDN_PARENT, 0);
-            }
-            printTrace("\nAdding BindDN with addEntryToNew",3);
-            addEntryToNew($replBind_entry, BINDDN, 0);
-        } else {
-	    # check wether the backend has been imported in new or not
-	    if (! alreadyMigrated($backendtoExportFrom)) {
-	        if ($backendtoExportFrom ne $NULL) {
-                    # if not imported => we need to import the bind DN entry
-		    &startServer() unless (isDirectoryAlive());
-		    $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 	
-		    &ExportAndAddEntry($bindDN, $backendtoExportFrom, $ldif_dir);
-	        }
-	        else {
-		    # do nothing
-                }
-	    }
-	}
-    }
-    # remove the empty ldif directory 
-    rmdir($ldif_dir) if (-d $ldif_dir);
-    # close the LDAP connection to new
-    $conn->close if ($conn);
-}
-
-sub alreadyMigrated {
-    my $backendToCheck = shift;
-    foreach $backend (@BACKENDS) {
-	return 1 if ($backend eq $backendToCheck);
-    }
-    return 0 ;
-}
-
-sub belongsSuffix {
-    my $suffix = shift;
-    my $bindDN = shift;
-    return ($bindDN =~ /$suffix\s*$/i);
-}
-
-sub length {
-    my $suffix = shift;
-    my $count = 0;
-    while ($suffix =~ /./g) {
-	$count++;
-    }
-    return $count ;
-}
-
-sub getBackendtoExportFrom {
-    my $bindDN              = shift ;
-    my $sizeOfSuffix        = 0 ;
-    my $NULL                = "";
-    my @oldSuffixes         = keys(%oldBackends);
-    my @oldChainingSuffixes = keys(%oldChainingBackends);
-    my $bindDN_backend      = $NULL;
-    my $config              = "cn=config";
-
-    my $norm_bindDN = normalizeDN($bindDN);
-    # Check if bindDN exists in cn=config - NGK
-    if (belongsSuffix($config,$norm_bindDN)) {
-        $bindDN_backend = $config;
-        printTrace("\ngetBackendtoExportFrom: bindDN_backend: $bindDN_backend",3);
-    } else {
-        foreach $suffix (@oldSuffixes){
-	    printTrace("\ngetBackendtoExportFrom: suffix to compare with is: $suffix",3);
-	    if ((belongsSuffix($suffix,$norm_bindDN)) && (length($suffix) > $sizeOfSuffix)) {
-	        $sizeOfSuffix   = length($suffix);
-	        $bindDN_backend = $oldBackends{$suffix}; 
-	        printTrace("\ngetBackendtoExportFrom: bindDN_backend: $bindDN_backend, sizeOfSuffix: $sizeOfSuffix",3);
-	    }
-        }
-        foreach $suffix (@oldChainingSuffixes){
-	    printTrace("\ngetBackendtoExportFrom: suffix to compare with is a chained suffix: $suffix",3);
-	    if ((belongsSuffix($suffix,$norm_bindDN)) && (length($suffix) > $sizeOfSuffix)) {
-	        printMsg("\n\n*** Entry stored on a remote backend - $norm_bindDN");
-	        printMsg("\n*** We don't migrate it");
-	        return $NULL;
-	    }
-        }
-    }
-    return $bindDN_backend;
-}
-
-
-sub getBackendtoImportTo {
-    my $bindDN         = shift;
-    my $sizeOfSuffix   = 0;
-    my $NULL           = "";
-    my $suffixArg      = "nsslapd-suffix"; 
-    my $bindDN_backend = $NULL;
-    open( DSELDIF, "< $DSEldif" ) || die "Can't open $DSEldif: $!: ";
-    my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-    while ($entry = readOneEntry $in) {
-	$typeOfEntry = getTypeOfEntry($entry);
-	if ($typeOfEntry eq "LDBM_BACKEND_INSTANCE"){
-	    my $suffix = $entry->{$suffixArg}[0];
-	    if ((belongsSuffix($suffix,$bindDN)) && (length($suffix) > $sizeOfSuffix)) {
-		$sizeOfSuffix   = length($suffix);
-		$bindDN_backend = $entry->{cn}[0]; 
-	    }
-	}
-    }
-    close(DSELDIF);
-    return $bindDN_backend ;
-}
-
-
-sub ExportAndAddEntry {
-    my $DN                   = shift;
-    my $backendtoExportFrom  = shift;
-    my $ldif_dir             = shift;
-    my $ldif                 = "$ldif_dir${PATHSEP}$backendtoExportFrom.ldif" ;
-    # first: export entry pointed out by the $DN to $ldif file
-    $ENV{"$LIB_PATH"}=$old_libpath;
-    if (! $ldif_dir) { $ldif_dir = $ldif_rep ;}
-    if  (!(-d $ldif_dir)) {
-	mkdir($ldif_dir,0777) or die "\ncan't create $ldif_dir to store temporary ldif files\n";
-    }
-    chdir($oldSlapdExecDir) or die "\nCould not change directory to $oldSlapdExecDir: $!\n";
-    &db2Ldif($ldif, $backendtoExportFrom, $oldHome, $DN);
-    chdir($curdir)  or die "\nCould not change directory to $curdir: $!\n";   
-
-    # then: Add it to new
-    if (! $conn) {
-	$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-    }
-    open( BINDDNLDIF, "< $ldif" ) || die "\nCan't open $ldif: $!: \n";
-    my $in = new Mozilla::LDAP::LDIF(*BINDDNLDIF) ;
-    while ($entry = readOneEntry $in) {
-	my $entryDN = $entry->getDN(1);
-	if ($DN eq $entryDN) {
-	    addEntryToNew($entry, "nsds5ReplicaBindDN", 0);
-	}
-    }
-    close(BINDDNLDIF);
-    # remove the ldif file after the import
-    unlink($ldif) ;
-}
-
-#############################################################################
-sub MigrateNSDS_replication_agreement {
-    foreach $replicationAgreement (@replicationAgreements) {
-	my $DN = $replicationAgreement->getDN(1);
-	if (alreadyExistsInNew($replicationAgreement)){
-	    # replication agreement already exists
-	    printMsg("\n\n*** NSDS_REPLICATION_AGREEMENT - $DN already exists");
-	    printMsg("\n*** Migration will not update it");
-	}
-	else {
-		&migrate_credential($replicationAgreement, "nsDS5ReplicaCredentials");
-	    addEntryToNew($replicationAgreement, "NSDS_REPLICATION_AGREEMENT", 1);
-	}
-    }
-}
-
-
-sub parseNSDS_replication_agreement{
-    my $replicationAgreement = shift;
-    push @replicationAgreements, $replicationAgreement ;
-}
-
-#############################################################################
-	  
-sub migrateChangelog5{
-    my $changelog    = shift;
-    my $DN           = $changelog->getDN(1);
-    my $changelogdir = "nsslapd-changelogdir";
-    if (alreadyExistsInNew($changelog)){
-	# cn=changelog5,cn=config already exists in new
-	my $newChangelog   = searchEntry($DN);
-	my @newChangelogdir = $newChangelog->getValues($changelogdir);
-	$changelog->setValues($changelogdir, @newChangelogdir);
-	updateEntry($changelog, "CHANGELOG5", 0, 1);
-    }
-    else {
-	# cn=changelog5,cn=config need to be created in new. 
-	# the changelogdir value must be setup to <new_root_server>/slapd-instance/changelogdb
-	$changelog->setValues($changelogdir,"${serverHome}${PATHSEP}changelogdb");
-	addEntryToNew($changelog, "CHANGELOG5", 1);
-    }
-}
-
-
-sub migrateChangelog {
-    my $oldchangelogdir = "";
-    my $newchangelogdir = "";
-    my $changelogdir    = "nsslapd-changelogdir";
-    my $CL5DN           = "cn=changelog5,cn=config";
-    printTrace("\n\n***** Migrate Changelog...",0,1);
-    open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-    my $in = new Mozilla::LDAP::LDIF(*DSELDIF);
-    while ($entry = readOneEntry $in) {
-        $typeOfEntry = getTypeOfEntry($entry);
-        if ($typeOfEntry eq "CHANGELOG5"){
-            $oldchangelogdir = ($entry->getValues($changelogdir))[0];
-        }
-    }
-    close(DSELDIF);
-    if ($oldchangelogdir) {
-        # If using olddatadir to migrate from, the path of the changelogdb
-        # from the dse.ldif may not match the path where the old server
-        # root was archived.  We may need to modify oldchangelogdir so the
-        # copy of the changelog files succeeds.
-        unless(-e $oldchangelogdir) {
-            if($olddatadir) {
-                my @cldbpath = split(/\//,$oldchangelogdir);
-                until($cldbpath[0] =~/^slapd-/) {
-                    shift(@cldbpath);
-                }
-                my $tmpcldbpath = join(${PATHSEP}, @cldbpath);
-                $oldchangelogdir = "$oldDir${PATHSEP}$tmpcldbpath";
-            }
-            # If oldchangelogdir still looks to be wrong, prompt for the
-            # location instead of just failing on the copydir operation
-            # and bombing out of the migration.
-            unless(-e $oldchangelogdir) {
-                print("\n\nThe old changelog directory \"$oldchangelogdir\" doesn't exist.  Please enter the correct path: ");
-                $oldchangelogdir = <STDIN>;
-            }
-        }
-        &startServer() unless (isDirectoryAlive());
-        $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n";
-        my $newChangelog   = searchEntry($CL5DN);
-        $newchangelogdir = ($newChangelog->getValues($changelogdir))[0];
-        stopServer($root,'slapd-'.$newname);
-        printTrace("\ncopying $oldchangelogdir${PATHSEP}* to $newchangelogdir",3);
-        copyDir("$oldchangelogdir","$newchangelogdir");
-
-	# We need to modify the DBVERSION file for a new verision of the db
-	open(DBVERSION,">$newchangelogdir${PATHSEP}DBVERSION") || die "Can't overwrite $newchangelogdir${PATHSEP}DBVERSION: $! ";
-	print DBVERSION "Changelog5/NSMMReplicationPlugin/3.0";
-	close(DBVERSION);
-
-        &startServer() unless (isDirectoryAlive());
-    }
-}
-
-#############################################################################
-
-sub migrateReplication{
-    my $replication   = shift;
-    my $DN            = $replication->getDN(1);
-    if (alreadyExistsInNew($replication)){
-	# replication agreement already exists
-	printMsg("\n\n*** $DN already exists");
-	printMsg("\n*** Migration will not update it");
-    }
-    else {
-	addEntryToNew($replication, "REPLICATION", 1);
-    }
-}
-
-#############################################################################
-
-sub migrateSecurity{
-    my $security   = shift;
-    if ($entry->hasValue("objectClass", "nsEncryptionConfig")) {
-        my $certfile = "alias/slapd-" . $newname . "-cert8.db";
-        my $keyfile = "alias/slapd-" . $newname. "-key3.db";
-        $entry->setValues("nsCertfile",$certfile) if ! $entry->hasValue("nsCertfile",$certfile);
-        $entry->setValues("nsKeyfile",$keyfile) if ! $entry->hasValue("nsKeyfile",$keyfile);
-    }
-    if (alreadyExistsInNew($security)){
-	# already exists in new
-	updateEntry($security, "SECURITY", 0, 1);
-    }
-    else {
-	addEntryToNew($security, "SECURITY", 1);
-    }
-}
-
-#############################################################################
-	     
-sub migrateSNMP{
-    my $snmp   = shift;
-    if (alreadyExistsInNew($snmp)){
-	# already exists in new
-	updateEntry($snmp, "SNMP", 0, 1);
-    }
-    else {
-	addEntryToNew($snmp, "SNMP", 1);
-    }
-}
-
-#############################################################################
-# printMsg print message to the user standard output.  
-
-sub printMsg {
-
-  my $TypeMsg = shift ;
-  my $Msg     = shift ;
-  my $LineNb  = shift ;
-  if ($LineNb) {
-    printTrace("Line: $LineNb, $TypeMsg, $Msg");
-  }
-  else {
-    printTrace("$TypeMsg $Msg");
-  }
-}
-
-#############################################################################
-#  print message error to the user standard output.  
-
-sub printTrace {
-
-  my $Msg     = shift ;
-  my $level   = shift ;
-  my $sep     = shift ;
-
-  if ($sep) {
-      print "\n-------------------------------------------------------------------------";
-      print LOGFILE "\n-------------------------------------------------------------------------";
-  }
-  
-  if ($level <= $TRACELEVEL) {
-    print($Msg);    
-    print LOGFILE $Msg ;
-  }
-}  
-
-#############################################################################
-# this subroutine implements a very stupid version of diff
-
-sub diff {
-	my $f1              = shift;
-	my $f2              = shift;
-	my $lineToBeginWith = shift;
-	my $NULL            = "" ;
-	my $diff_f1         = $NULL ;
-	my $diff_f2         = $NULL ;
-	my $retval          = $NULL ;
-	my $ret;
-	open(F1, "$f1") or die "Could not open file $f1";
-	open(F2, "$f2") or close(F1), die "Could not open file $f2";
-
-	while (defined($l1 = <F1>)) {
-	    if ($lineToBeginWith){
-		$lineToBeginWith -- ;
-		next ;
-	    }
-	    next if ($l1 =~ /^\#/);
-	    $ret = defined($l2 = <F2>);
-	    if ($ret) {
-		$ret = defined($l2 = <F2>) while ($ret && ($l2 =~ /^\#/)) ;
-		if ($ret) {
-		    if (!($l1 eq $l2)) {
-			
-			# ignore whitespace
-			$l1_clean = $l1 ;
-			$l2_clean = $l2 ;
-			$l1_clean =~ s/\s//g;
-			$l2_clean =~ s/\s//g;
-						  
-			if (!($l1_clean eq $l2_clean)) {
-			    $diff_f1 .= "${l1}" unless ($l1_clean eq $NULL);
-			    $diff_f2 .= "${l2}" unless ($l2_clean eq $NULL);
-			}
-		    }
-		}
-		else {
-		   next if ($l1 =~ /^\s*$/) ;
-		   $diff_f1 .= "${l1}";
-		}
-	    }
-	    else {
-		next if ($l1 =~ /^\s*$/) ;
-		$diff_f1 .= "${l1}";
-	    }
-	}
-	
-	while (defined($l2 = <F2>)) {
-	    	if (($l2 =~ /^\#/) || ($l2 =~ /^\s*$/)) { 
-		    next ;
-		}
-		else {
-		    $diff_f2 .= "${l2}" ;
-		}
-	}
-
-	close(F1);
-	close(F2);
-
-	$retval .= "- differences present in your config file but not in standard file:\n\n". "$diff_f1\n" if ($diff_f1) ;
-	$retval .= "- differences present in standard file but not in your config file:\n\n" . "$diff_f2"  if ($diff_f2) ;
-	return $retval ;
-}
-
-sub CompareStdConfigFiles {
-  # Compare each configuration file against its default version.  If it has changed,
-  # notify the user that the file has changed and will need to be checked by the
-  # user.  This should be safe to do because there should be no path information
-  # stored in these conf files, which are just schema stuff.
-  # printTrace("\nCheck if standard configuration files have changed",3);
-
-  # get the version of the DS to migrate
-  ($oldVersion, $oldMinor) = &getVersion($oldDir, $oldversionstr);
-  # get the version of the new DS
-  ($Version, $Minor) = &getVersion($root);
-
-  # get old LIB_PATH
-  $old_libpath = &getLibPath($oldDir, $oldVersion, $oldMinor);
-  # get new LIB_PATH
-  $new_libpath = &getLibPath($root, $Version, $Minor);
-
-  my $origFilePath = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}install${PATHSEP}schema${PATHSEP}" ;
-  my $FilesChanged = "";
-  my $AllDiffs     = "***********************************************************************";
-  my $NoChanges    = "" ;
-  my $lineToBegin  = 0 ;
-  opendir(CONFDIR, $oldSchemaDir) or
-    die "Error: could not open migrated config dir $oldConfDir: $!";
-  
-  foreach $file (readdir(CONFDIR)) {
-       $origFile   = $origFilePath . $file ;
-       $configFile = $oldSchemaDir . $file ;
-      if (( exists($stdIncludes{lc($file)})) && (-f $origFile)) {
-	  $diffs = &diff($configFile, $origFile, $lineToBegin);
-	  $lineToBegin = 0 if $lineToBegin ;
-	  if ($diffs) {
-	      $FilesChanged .= "\n$configFile";
-	      $AllDiffs     .= "\n$configFile  is different than the standard configuration file" ;
-	      $AllDiffs     .= "\nYou will need to check this file and make sure its changes are compatible ";
-	      $AllDiffs     .= "with the new directory server\nHere are the differences:\n";
-	      $AllDiffs     .= "$diffs \n\n";
-	      $AllDiffs     .= "***********************************************************************";
-	  } 
-	  else {
-  	      $NoChanges .= "\n$configFile";
-	  }
-      }
-   }
-  closedir(CONFDIR);
-
-if ($FilesChanged) {
-    printTrace("\nNo changes to old configuration files:$NoChanges",3) ;
-    printTrace("\n***********************************************************************",3) ;
-    printMsg("\nThe following standard files have been modified: $FilesChanged");
-    if ($NO_INPUT_USER) {
-	# do nothing
-    }
-    else {
-	printMsg("\nDo you want to see the differences Yes/No [No] ?") ;
-	my $answer = <STDIN> ;
-	if ($answer =~ /y|yes/i) {
-	    printMsg("$AllDiffs");
-	}
-	printMsg("\nDo you want to continue the migration Yes/No [No] ?");
-	$answer = <STDIN> ;
-	if (! ($answer =~ /y|yes/i)) {
-	    exit(1);
-	}
-    }
-  }
-}
-
-
-
-#############################################################################
-
-# this is used to run the system() call, capture exit and signal codes,
-# and die() upon badness; the first argument is a directory to change
-# dir to, if any, and the rest are passed to system()
-sub mySystem {
-    my $rc = &mySystemNoDie(@_);
-    my ($dir, @args) = @_;
-    if ($rc == 0) {
-# success
-    } elsif ($rc == 0xff00) {
-		die "Error executing @args: error code $rc: $!";
-    } elsif ($rc > 0x80) {
-        $rc >>= 8;
-		die "Error executing @args: error code $rc: $!";
-    } else {
-        if ($rc &   0x80) {
-            $rc &= ~0x80;
-        } 
-		die "Error executing @args: received signal $rc: $!";
-    }
-
-	# usually won't get return value
-	return $rc;
-}
-
-# This version does not die but just returns the error code
-sub mySystemNoDie {
-	my ($dir, @args) = @_;
-	if ($dir && ($dir ne "")) {
-		chdir($dir) or die "Could not change directory to $dir: $!";
-	}
-	my $cmd = $args[0];
-	# the system {$cmd} avoids some NT shell quoting problems if the $cmd
-	# needs to be quoted e.g. contains spaces; the map puts double quotes
-	# around the arguments on NT which are stripped by the command
-	# interpreter cmd.exe; but don't quote things which are already quoted
-	my @fixargs = map { /^[\"].*[\"]$/ ? $_ : $quote . $_ . $quote } @args;
-	my $rc = 0;
-	if ($cmd =~ /[.](bat|cmd)$/) {
-		# we have to pass batch files directly to the NT command interpreter
-		$cmd = $com_spec;
-#		print "system $cmd /c \"@fixargs\"\n";
-		$rc = 0xffff & system {$cmd} '/c', "\"@fixargs\"";
-	} else {
-#		print "system $cmd @fixargs\n";
-        $rc = 0xffff & system {$cmd} @fixargs;
-        }
-	chdir(${curdir})  or die "Could not change directory to $curdir: $!";
-	return $rc;
-}
-
-###########################################################################################
-#                                                                                         #
-#                    Export/Import of the backends in @BACKENDS                           #
-#                                                                                         #
-###########################################################################################
-
-sub manydb2Ldif {
-  my $ldif_dir = shift;  
-  $ENV{"$LIB_PATH"}=$old_libpath;
-  if (! $ldif_dir) { $ldif_dir = $ldif_rep ;}
-  if  (!(-d $ldif_dir)) {
-      mkdir($ldif_dir,0777) or die "can't create $ldif_dir to store temporary ldif files";
-  }
-  chdir($oldSlapdExecDir)  or die "Could not change directory to $oldSlapdExecDir: $!";
-  foreach $backend (@BACKENDS) {
-    my $ldif = "${ldif_dir}$backend.ldif" ;
-    &db2Ldif($ldif, $backend, $oldHome);
-  }
-  print "  Done.\n";
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";   
-}
-
-sub db2Ldif {
-  my $ldif            = shift ;
-  my $backend         = shift ;
-  my $home            = shift ;
-  my $include_suffix  = shift ;
-  my $db2ldif_param ;
-  if ($include_suffix) {
-      $db2ldif_param   = "db2ldif -r -D $home -n $backend -a $ldif -s \"$include_suffix\"";
-  }
-  else {
-      $db2ldif_param   = "db2ldif -r -D $home -n $backend -a $ldif";
-  }
-  open(DB2LDIF, "${quote}${quote}$slapdExecName${quote} $db2ldif_param${quote} 2>&1 |") or die "Could not run ns-slapd program $ldif2db_exe\n";
-  sleep(1); # allow some data to accumulate in the pipe
-  my $ii = 0;
-  while (<DB2LDIF>) {
-      ++$ii;
-      if (($ii % 250) == 0) {
-	printMsg("  Processing...\n");
-      }
-      printMsg($_);
-  }
-  close(DB2LDIF);
-  # set the ownership of the ldif file; should be the same as the 5.x slapd user id
-  if ((! $isNt) && ($oldlocaluser ne $localuser)) {
-      if (-f $ldif) {
-	  chown( $newuid, $newgid, $ldif) or printMsg("\nUnable to change the ownership of $ldif to $localuser") ;
-      }
-  }   
-}
-
-sub manyLdif2db {
-  my $ldif_dir = shift;
-  $ENV{"$LIB_PATH"}=$new_libpath;
-  chdir($slapdExecDir)  or die "Could not change directory to $slapdExecDir: $!";
-  foreach $backend (@BACKENDS) {
-    my $ldif = "${ldif_dir}$backend.ldif" ;
-    &Ldif2db($ldif, $backend);
-  }
-  # remove the empty ldif directory 
-  # but not if using the data dir
-  if (!$olddatadir) {
-	rmdir($ldif_dir);
-  }
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";
-}
-
-
-sub Ldif2db {
-  my $ldif    = shift ;
-  my $backend = shift ;
-  my $ldif2db_param = "ldif2db -D $serverHome -n $backend -i $ldif";
-  open(LDIF2DB, "${quote}${quote}$slapdExecName${quote} $ldif2db_param${quote} 2>&1 |") or die "Could not run ns-slapd program $ldif2db_exe\n";
-  sleep(1); # allow some data to accumulate in the pipe
-  while (<LDIF2DB>) {
-      printMsg($_);
-  }
-  close(LDIF2DB);
-  # remove the ldif file after the import
-  # but not if using the data dir
-  if (!$olddatadir) {
-	unlink($ldif) ;
-  }
-}
-
-
-###########################################################################################
-#                                                                                         #
-#                    Running/Stopping the Server                                          #
-#                                                                                         #
-###########################################################################################
-
-
-
-sub isDirectoryAlive {
-    die "\n Migration aborted. Make sure your old and new Directory Servers are installed on the same machine \n" if ( $LDAPservername == -1 );
-    my $test_conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd);
-    if ($test_conn) {
-	$test_conn->close();
-	return 1;
-    }
-    else {
-	return 0 ;
-    }
-}
-
-
-sub startServer {
-  my $instanceDir = ${serverHome} ;
-  my $errLog = $instanceDir . $PATHSEP . 'logs' . $PATHSEP . 'errors';
-  # emulate tail -f
-  # if the last line we see does not contain "slapd started", try again
-  my $done = 0;
-  my $started = 0;
-  my $code = 0;
-  my $lastLine = "";
-  my $timeout = time + 240;	# 4 minutes
-  $ENV{"$LIB_PATH"}=$new_libpath;
-
-  my $startCmd = $instanceDir . $PATHSEP . 'start' . $script_suffix;
-  if (! -f $startCmd) {
-    $startCmd = $instanceDir . $PATHSEP . 'start-slapd' . $script_suffix;
-  }
-  $code = &mySystem($instanceDir,$startCmd);
-  open(IN, $errLog) or die "Could not open error log $errLog: $!";
-  my $pos = tell(IN);
-  while (($done == 0) && (time < $timeout)) {
-    for (; ($done == 0) && ($_ = <IN>); $pos = tell(IN)) {
-      $lastLine = $_;
-      #			print;
-      # the server has already been started and shutdown once . . .
-      if (/slapd started\./) {
-	$started++;
-	if ($started == 2) {
-	  $done = 1;
-	}
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/Initialization Failed/) {
-	#				print "Server failed to start: $_";
-	$code = &mySystem($instanceDir, $startCmd);
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/exiting\./) {
-	#				print "Server failed to start: $_";
-	#$code = &mySystem($startCmd);	
-	$code = &mySystem($instanceDir, $startCmd);
-      }
-    }
-    if ($lastLine =~ /PR_Bind/) {
-      # server port conflicts with another one, just report and punt
-      print $lastLine;
-      print "This server cannot be started until the other server on this\n";
-      print "port is shutdown.\n";
-      $done = 1;
-    }
-    if ($done == 0) {
-      # rest a bit, then . . .
-      sleep(2);
-      # . . . reset the EOF status of the file desc
-      seek(IN, $pos, 0);
-    }
-  }
-  close(IN);
-  
-  sleep(5);
-  die "\nUnable to start the $Version.$Minor Directory Server\n" unless (isDirectoryAlive());
- 
-  return 0;
-}
-
-sub stopServer {
-	my $root = shift;
-	my $name = shift;
-	$maxStopIterations = 5;
-	print "\nShutting down server $name . . .\n";
-	$ENV{"$LIB_PATH"}=$new_libpath;
-	$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop' . $script_suffix . $quote;
-	if (! -f $stopCmd) {
-		$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop-slapd' . $script_suffix . $quote;
-	}
-
-	if (! -f $stopCmd) {
-		# no stop command, probably a 1.X system; for NT, we'll try net stop
-		# for unix, we'll get the pid and kill it
-		if ($isNT) {
-			$stopCmd = 'net stop ' . $name;
-		} else {
-			# see if there is a pid file
-			$pidfile = $root . $PATHSEP . $name . $PATHSEP . 'logs' .
-				$PATHSEP . 'pid';
-			if (open(PIDFILE, $pidfile)) {
-				chomp($pid = <PIDFILE>);
-				close(PIDFILE);
-				while ($maxStopIterations-- && !$exitCode) {
-					$exitCode = kill(15, $pid);
-				}
-				$stopCmd = undef;
-			}
-		}
-	}
-
-	# keep looping until the stop cmd returns an error code, which usually
-	# means that what ever we want to stop is stopped, or some other error
-	# occurred e.g. permission, or no such service
-	$exitCode = &runAndIgnoreOutput($stopCmd);
-#	print "stopServer: exitCode=$exitCode\n";
-	while ($stopCmd && $maxStopIterations-- && $exitCode) {
-		$exitCode = &runAndIgnoreOutput($stopCmd);
-#		print "stopServer: exitCode=$exitCode\n";
-	}
-
-	if (!$maxStopIterations) {
-		print "Warning: could not shutdown the server: $!\n";
-	}
-	sleep(10) ;
-	$exitCode = 0;
-}
-
-
-sub runAndIgnoreOutput {
-	my $cmd = shift;
-	printMsg(".");
-	open(RUNCMD, "${quote}$cmd${quote} 2>&1 |") or die "Error: could not run $cmd: $!";
-	printMsg(".");
-	sleep(1); # allow pipe to fill with data
-	printMsg(".");
-	while (<RUNCMD>) {
-#		print;
-	}
-	my $code = close(RUNCMD);
-#	print "runAndIgnore: code=$code status=$?\n";
-	return $?;
-}
-
-#############################################################################
-# migrate SSL info
-
-sub MigrateSSL {
-  my $secPwd = 'bidon' ;
-  # copy the SSL directory
-  &copyDir("$oldHome${PATHSEP}ssl","$serverHome${PATHSEP}ssl") if (-d "$oldHome${PATHSEP}ssl");
-  # copy the cert db and key files
-  if ( -d "$oldDir${PATHSEP}alias") {
-    $aliasDir = "$root${PATHSEP}alias";
-    if (! -d $aliasDir) {
-      mkdir($aliasDir, 0750);
-    }
-    &stopServer($root,'slapd-'.$newname);
-    my $keydb         = "$aliasDir${PATHSEP}slapd-$newname-key3.db"  ;
-    my $certdb        = "$aliasDir${PATHSEP}slapd-$newname-cert8.db" ;
-    my $certdb7       = "$aliasDir${PATHSEP}slapd-$newname-cert7.db" ;
-    my $old_keydb     = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-key3.db" ;
-    my $old_certdb    = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-cert7.db"; 
-    my $keydb_backup  = "$aliasDir${PATHSEP}slapd-$newname-key3.db_backup"  ;
-    my $certdb_backup = "$aliasDir${PATHSEP}slapd-$newname-cert7.db_backup" ;
-    if (-f $old_keydb) {
-    	if (-f $keydb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$keydb already exists. backup in $keydb_backup ...");
-		&copyBinFile($keydb,$keydb_backup);
-		&copyBinFile($old_keydb,$keydb);
-	    }
-	    else {
-		print("\n\n$keydb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    &copyBinFile($old_keydb,$keydb);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_keydb,$keydb);
-	}
-    }
-    if (-f $old_certdb) {
-	$mode = (stat($old_certdb))[2] if $PRESERVE;
-	if (-f $certdb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$certdb already exists. backup in $certdb_backup ...");
-		&copyBinFile($certdb,$certdb_backup);
-		unlink($certdb) || print "Couldn't delete $certdb : $!\n";
-		&copyBinFile($old_certdb,$certdb7);
-	    }
-	    else {
-		print("\n\n$certdb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    unlink($certdb) || print "Couldn't delete $certdb : $!\n";
-		    &copyBinFile($old_certdb,$certdb7);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_certdb,$certdb7);
-	}
-    }
-    # copy the old password file
-    if (-f "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt") {
-      &copyBinFile(
-		   "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt",
-		   "$aliasDir${PATHSEP}$type-$newname-pin.txt"
-		  );
-    }
-    &startServer();
-    if ($PRESERVE) {
-	chown($newuid,$newgid,$certdb) || print "Failed to set uid $newuid gid $newgid on $certdb : $!\n";
-	chmod($mode,$certdb) || print "Failed to set mode $mode on $certdb : $!\n";
-    }
-  }
-
-}
-
-sub DisableSSL {
-  my $entry      = $conn->search("cn=config","base","objectclass=*");
-  my $LDAPparam =  "nsslapd-security" ;
-  my $Value     = "off" ;
-  if ($entry->{$LDAPparam}[0] ne $Value) { 
-    printTrace("\nDisable SSL...",1);
-    $entry->setValues($LDAPparam, $Value);
-  }
-  my $res = $conn->update($entry);
-  if ($res) {
-    printTrace("\nSSL disabled",2);
-  }
-  else {
-    printMsg("\nCan't disabled SSL. The server may have problems to start");
-  }
-}
-
-# enable the migration of client authentication informations
-sub MigrateCertmap {
-  # backup the old certmap.conf and replace it with the new one
-  my $oldCertmap = "$oldDir${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf";
-  my $newCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf"  ;
-  my $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-  if (-f $oldCertmap) {
-      if ($NO_INPUT_USER) {
-	  printMsg("\n$newCertmap has been backup in $backupCertmap"); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-      else {
-	  my $Ask = 1 ;  
-	  while ($Ask) {
-	      printMsg("\n\nWhere do you want to back up the file $newCertmap [$backupCertmap] ?") ;
-	      my $Answer = <STDIN> ;
-	      $backupCertmap = $Answer if ($Answer ne "\n");
-	      chomp($backupCertmap);
-	      printTrace("\nDest: .$backupCertmap.",4);
-	      if (-e $backupCertmap) {
-		  printMsg("\n\n$backupCertmap already exists. Do you want to overwrite it Yes/No [No] ?") ;
-		  if (<STDIN> =~ /yes|y/i) {
-		      $Ask = 0 ;
-		  }
-		  else {
-		      $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-		  }
-	      }
-	      else {
-		  $Ask = 0 ;
-	      }
-	  }
-	  printTrace("\nBackup file: $newCertmap in $backupCertmap",4); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-  }
-  else {
-  }
-}
-
-sub hasChangedoldCertmap {
-    my $certmapfile = shift ;
-    my @reference = ("certmap default         default",
-		     "default:DNComps",
-		     "default:FilterComps     e") ;
-    my $cpt = 0 ;
-    printTrace("\nhasChangedoldCertmap",3);
-    open(CERTMAP,"< $certmapfile");
-    while (<CERTMAP>) {
-	if ((! /^\s*#/) && (! /^\s*$/)) {
-	    my $ref = $reference[$cpt] ;
-	    printTrace("\nValue: $_, ref: $ref",4);
-	    if (! /^\s*$ref\s*$/) {
-		return 1 ;
-	    }
-	    else {
-		$cpt++ ;
-	    }
-	}
-    }
-    close (CERTMAP);
-    printTrace("\ncpt: $cpt",4);
-    if ($cpt < $#reference) {
-	return 1 ;
-    }
-    else {
-        return 0 ;
-    }	
-}
-
-
-###########################################################################################
-#                                                                                         #
-#                    Copy directory and files functions                                   #
-#                                                                                         #
-###########################################################################################
-
-
-sub copyDir {
-    my	$src = shift;
-    my	$dest = shift;
-	my  $exclude = shift;
-
-    opendir( SRC, $src ) or die "Can't open directory $src: $!: ";
-	my $mode;
-	my $uid;
-	my $gid;
-    mkdir ( $dest , 0755 ) or die "\nCan't create directory $dest. \nPlease check you have enough rights to create it and/or check that your parent directory exists.\n" if !( -e $dest );
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    local ( @files ) = readdir ( SRC );
-    closedir( SRC );
-    for ( @files ) {
-		if ( $_ eq "." || $_ eq ".." ) {
-			next;
-		} elsif ( $exclude && /$exclude/ ) {
-			next;
-		} elsif( -d "$src${PATHSEP}$_")  {
-			&copyDir ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_" ); 
-		} else {
-			&copyBinFile ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_");
-		}
-    }
-}
-
-sub copyBinFile {
-    my	$src = shift;
-    my	$dest = shift;
-    my  $buf = "";
-    my  $bufsize = 8192;
-
-    open( SRC, $src ) || die "Can't open $src: $!\n";
-	# if we are given a directory destination instead of a file, extract the
-	# filename portion of the source to use as the destination filename
-	if (-d $dest) {
-		$dest = $dest . $PATHSEP . &basename($src);
-	}
-    open( DEST, ">$dest" ) || die "Can't create $dest: $!\n";
-    binmode SRC;
-    binmode DEST;
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    while (read(SRC, $buf, $bufsize)) {
-		print DEST $buf;
-    }
-    close( SRC );
-    close( DEST );
-}
-
-#############################################################################################################
-# backup 5.x configuration files                                                                            #
-# backup the directory <root_server5>/slapd-instance/config dans <root_server5>/slapd-instance/BackupConfig #                           #
-#                                                                                                           #
-#############################################################################################################
-
-
-sub backupConfigFiles {
-  # backup the 5.x config files
-  my $src = "$serverHome${PATHSEP}config" ;
-  my $dest = "$serverHome${PATHSEP}config_backup" ;
-  if ($NO_INPUT_USER) {
-      printMsg("\n$src has been backup in $dest"); 
-      &copyDir($src,$dest);
-  }
-  else {
-      my $Ask = 1 ;  
-      while ($Ask) {
-	  printMsg("\n\nWhere do you want to back up your configuration directory [$dest] ?") ;
-	  my $Answer = <STDIN> ;
-	  $dest = $Answer if ($Answer ne "\n");
-	  chomp($dest);
-	  printTrace("\nDest: .$dest.",4);
-	  if (-e $dest) {
-	      printMsg("\n\n$dest already exists. Do you want to overwrite it Yes/No [No] ?") ;
-	      if (<STDIN> =~ /yes|y/i) {
-		  $Ask = 0 ;
-	      }
-	      else {
-		  $dest = "$serverHome${PATHSEP}config_backup" ;
-	      }
-	  }
-	  else {
-	      $Ask = 0 ;
-	  }
-      }
-      printTrace("\nBackup Directory: $src in $dest",4); 
-      &copyDir($src,$dest);
-  }
-}
-#############################################################################
-
-sub getLDAPservername {
-    my $oldLDAPservername;
-    my $LDAPservername;
-    my $localhost = "nsslapd-localhost";
-    open(OLDDSELDIF, "< $oldDSEldif") or die "\nError: could not open old config file $oldDSEldif \n";
-    my $in = new Mozilla::LDAP::LDIF(*OLDDSELDIF) ;
-    while ($entry = readOneEntry $in) {
-        my $DN = $entry->getDN(1) ;
-	if ($DN =~ /^cn=config$/i) {
-	    my @values = $entry->getValues($localhost);
-	    if ($entry->size($localhost)) {
-		$oldLDAPservername = $values[0];
-		printTrace("\nName of the old LDAP server: $oldLDAPservername",3);
-	    }
-	    break;
-	}	
-    } 
-    close(OLDSELDIF);
-
-    open( DSELDIF, "< $DSEldif" ) || die "\nCan't open $DSEldif \n";
-    my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-    while ($entry = readOneEntry $in) {
-        my $DN = $entry->getDN(1) ;
-	if ($DN =~ /^cn=config$/i) {
-	    my @values = $entry->getValues($localhost);
-	    if ($entry->size($localhost)) {
-		$LDAPservername = $values[0];
-		printTrace("\nName of the new LDAP server: $LDAPservername",3);
-	    }
-	    break;
-	}	
-    } 
-    close(DSELDIF);
-    # check ol and new Directory Instance are installed on the same physical machine.
-    if (lc($oldLDAPservername) ne lc($LDAPservername)) {
- 	 # warn the user he tries to migrate a 4.x server installed on a different machine from the 5.x one
-       	 printMsg("\n\nYour old instance is on $oldLDAPservername, whereas your new instance is on $LDAPservername. Migration on different machines is not supported. Do you want to continue ? Yes/No [No]:") ;
-       	 if (! (<STDIN> =~ /yes|y/i)) {
-       	     return -1;
-       	 }
-     }
-     return $LDAPservername ;       
-}
-
-#############################################################################
-
-sub getLibPath {
-        my $myDir       = shift;
-        my $myVersion   = shift;
-        my $myMinor     = shift;
-
-	if ($isNT) {
-		return $ENV{"$LIB_PATH"};
-	}
-        if (($myVersion >= 6) && ($myMinor >= 2)) {
-                return
-                "$myDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}lib${SEP}".
-                "$myDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${SEP}".
-                $ENV{"$LIB_PATH"};
-        } else {
-                return  "$myDir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-        }
-}
-
-#############################################################################
-
-sub getVersion {
-	my $dir         = shift;
-	my $versionstr  = shift;
-	my $version     = 0;
-	my $minor       = 0;
-	my $buildNumber = 0;
-	my $progDir     = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-	my $progDir2    = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}";
-
-	# find the slapd executable
-	if (!$versionstr) { # version not specified on cmd line - find it
-		$prog = $dir . $progDir . $slapdExecName;
-		if (! -f $prog) {
-			$prog = $dir . $progDir2 . $slapdExecName;
-			if (-f $prog && $isNT) {
-				# if slapd is in bin/slapd and we're on NT, just assume version 1;
-				# apparently, slapd.exe doesn't like the -v argument . . .
-				return ( '1', $minor );
-			}
-			else{
-				die "Could not run slapd program $prog: $!";
-			}
-		}
-		else {
-			chdir($dir . $progDir);
-		}
-	$cur_libpath=$ENV{"$LIB_PATH"};
-        $ENV{"$LIB_PATH"}=
-        	"$dir${PATHSEP}lib${SEP}".
-        	"$dir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}lib${SEP}".
-        	"$dir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${SEP}".
-        	$ENV{"$LIB_PATH"};
-		# read the old version from the old slapd program
-
-		open(F, "${quote}${quote}$prog${quote} -v${quote} 2>&1 |") or
-			die "Could not run slapd program $prog: $!";
-		sleep(1); # allow some data to accumulate in the pipe
-#	print "Output from $prog -v:\n";
-		while (<F>) {
-			if (/^Netscape-Directory/ || /^iPlanet-Directory/i) {
-				$versionstr = $_;
-				last;
-			}
-		}
-		$code = close(F);
-		#	print "$prog returned code=$code status=$?\n";
-		$ENV{"$LIB_PATH"}=$cur_libpath;
-	}
-
-	if ($versionstr =~ /^Netscape-Directory\/(\d+)\.(\d+)(?:b\d)*\s+(\S+)/) {
-		$version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	}
-	elsif ($versionstr =~ /^Netscape-Directory\(restrict?ed-mode\)\/(\d+)\.(\d+)\s+(\S+)/) { # we can have restricted-mode or restriced-mode ...
-        $version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	}
-	elsif ($versionstr =~ /^iPlanet-Directory\/(\d+)\.(\d+)\s+(\S+)/i) {
-		$version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	} elsif ($versionstr =~ /(\d+)\.(\d+)/) {
-		$version     = $1;
-		$minor       = $2;
-	}
-
-	if ($version == 0) {
-	    die "\nCould not determine version of the directory server in $dir: \n";
-	}
-
-	# distinguish the 4.1 and the 4.11 thanks to the buildNumber
-	if (($version == 4) && ($minor == 1)){
-	    if (! ($buildNumber =~ /^B99\.16/)) {
-		# it's not a 4.1 Netscape Directory Server => it's a 4.11
-		$minor = 11 ;
-	    }
-	}
-	chdir($curdir) or die "Could not change directory to $curdir: $!" ;
-	return ( $version, $minor );
-}
-
-###############################################################################################
-sub normalizeDir {
-    my $dir = shift ;
-    my $dir_prec = "" ;
-    while ($dir_prec ne $dir) {
-	$dir_prec = $dir ;
-	if ($isNT) {
-	    grep { s@\\\\@\\@g } $dir ;
-        }
-        else {
-	    grep { s@//@/@g } $dir ;
-        }
-    }
-    return $dir ;
-}
-
-
-###############################################################################################
-
-sub GetTime {
-    my $tm = localtime;
-    (my $sec, my $min, my $hour, my $dd, my $mm, my $yy) = ($tm->sec, $tm->min, $tm->hour, $tm->mday, ($tm->mon)+1, ($tm->year)+1900);
-    $sec  = "0$sec"  unless $sec > 9  ;
-    $min  = "0$min"  unless $min > 9  ;
-    $hour = "0$hour" unless $hour > 9 ;
-    $dd   = "0$dd"   unless $dd > 9   ;
-    $mm   = "0$mm"   unless $mm > 9   ;
-    return ($sec, $min, $hour, $dd, $mm, $yy);
-}
-
-###############################################################################################
-# get uid and group id of the 5.x slapd server.
-# The uid is done through the nsslapd-localuser attribute
-
-sub getuid_gid {
-    my $newuid ;
-    my $newgid ;
-    my $localuser ;
-    my $localuser_attr = "nsslapd-localuser" ;
-    if (! $isNT) {
-	&startServer() unless (isDirectoryAlive());
-	my $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Can't contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-	my $entry = $conn->search("cn=config ", "base","objectclass=*", 0, ($localuser_attr)) ;
-	# Tests wether we succeed to get the entry cn=config
-	die "\nCan't get the entry cn=config \n" unless ($entry);     
-	my @values = $entry->getValues($localuser_attr);
-	$conn->close();
-	if ($#values == -1 || ($values[0] eq "") ) { # tests wether the nsslapd-localuser attribute has a value
-	    printMsg("\nNo localuser has been found in the configuration of the directory. ");
-	    if ($NO_INPUT_USER) {
-		printMsg("\nWe considered nobody as the localuser");
-		$localuser = "nobody" ;
-	    }
-	    else {
-		my $Ask = 1 ;  
-		while ($Ask) {
-		    printMsg("\nUnder what user does your $Version.$Minor directory server run [nobody] ? ") ;
-		    $localuser = <STDIN> ;
-		    chomp($localuser);
-		    $localuser = "nobody" if ($localuser eq "");
-		    ($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ;
-		    if ($newuid) {
-			$Ask = 0 ;
-		    }
-		    else {
-			printMsg("\nError: $localuser is unknown from the system ");
-		    }
-		}
-	    }	
-	}
-	else {
-	    $localuser = $values[0]; # returns the first value (we should only have one localuser)
-	    my $size = $#values ;
-	}
-	($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ; 
-	return ($localuser, $newuid, $newgid) ;
-    }
-    else {
-	return () ;
-    }
-}
-
-sub getolduid_gid {
-    my $oldlocaluser ;
-    my $localuserAttr = "nsslapd-localuser";
-    my $entry ;
-    if (! $isNT) {
-	open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-	my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-	while ($entry = readOneEntry $in) {
-	    $typeOfEntry = getTypeOfEntry($entry);
-	    if ($typeOfEntry eq "CONFIG_NODE") {
-		$oldlocaluser = $entry->{$localuserAttr}[0] if ($entry->exists($localuserAttr));
-		break ;
-	    }
-       	}
-       	close(DSE);
-	($olduid, $oldgid) = (getpwnam("$oldlocaluser"))[2..3] ; 
-	return ($oldlocaluser, $olduid, $oldgid) ; 
-    }
-    else {
-	return ();
-    } 
-}
-###############################################################################################
-# get current directory
-
-sub getCwd {
-        my $command = $isNT ? "cd" : "/bin/pwd";
-        open(PWDCMD, "$command 2>&1 |") or
-                die "Error: could not execute $command: $!";
-        # without the following sleep, reading from the pipe will
-        # return nothing; I guess it gives the pwd command time
-        # to get some data to read . . .
-        sleep(1);
-        my $currentdir;
-        while (<PWDCMD>) {
-                if (!$currentdir) {
-                        chomp($currentdir = $_);
-                }
-        }
-        my $code = close(PWDCMD);
-#       if ($code || $?) {
-#               print "$command returned code=$code status=$? dir=$curdir\n";
-#       }
-#       print "getCwd curdir=\[$curdir\]\n";
-        return $currentdir;
-}
-
-################################
-#	Need to migrate the credential.
-#	If the credential can not be migrated, leave it at it is
-################################
-sub migrate_credential{
-	my $entry_to_modify = shift;
-	my $credentials_attr = shift;
-	my @old_value = $entry_to_modify->getValues($credentials_attr); 
-	my $migratecredExecName = 'migratecred';
-	my $credOldHome = $oldHome;
-	my $credServerHome = $serverHome;
-
-	if ($isNT) {
-		# oldHome may be pointing to the archived copy of the
-		# instance dir which may be different than the path that
-		# the instance was originally installed as on Windows.  If
-		# this path is not the original install path, then the 
-		# credential will not be migrated correctly.  We should
-		# prompt the user on Windows for the correct path.
-		
-		print "\n\nThe old instance path must be the same as where it was";
-		print "\ninitially installed, not where it was archived in order";
-		print "\nfor this step to succeed.  Please verify that the path";
-		print "\nis correct.  Note that case sensitivity is important here.";
-		print "\n\nOld Instance Directory: $credOldHome";
-		print "\nIs this correct? (y/n): ";
-		chomp(my $answer = <STDIN>);
-		if (!($answer =~ /y|yes/i)) {
-			print "\nPlease enter the correct path for the old instance directory: ";
-			chomp($credOldHome = <STDIN>);	
-		}
-
-		print "\n\nThe new instance path must also be correct for this step";
-		print "\nto succeed.  Please verify that the path is correct.  Note";
-		print "\nthat case sensitivity is important here.";
-		print "\n\nNew Instance Directory: $credServerHome";
-		print "\nIs this correct? (y/n): ";
-		chomp(my $answer = <STDIN>);
-                if (!($answer =~ /y|yes/i)) {
-                        print "\nPlease enter the correct path for the new instance directory: ";
-			chomp($credServerHome = <STDIN>);
-		}
-	}
-# print "\nMigratecred command is: ${quote}$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}$migratecredExecName${quote} -o $credOldHome -n $credServerHome -c @old_value\n";
- 
-	my @new_cred   = `${quote}$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}$migratecredExecName${quote} -o $credOldHome -n $credServerHome -c @old_value`;
-
- 	if ( $? == 0 ) 
-	{
- 		$entry_to_modify->setValues($credentials_attr, @new_cred);
-	}
-}
-

ldap/admin/src/scripts/template-migrateInstance5

@@ -1,540 +0,0 @@
-#{{PERL-EXEC}}
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-#
-use Time::localtime;
-
-BEGIN {
-	require 'uname.lib';
-	$| = 1;
-	$isNT = -d '\\';
-	$PATHSEP = $isNT ? "\\" : "/";
-        $SEP = $isNT ? ";" : ":" ;
-	$exitCode = 0;
-	@INC = ( '.', '../../../admin/admin/bin');
-	grep { s@/@\\@g } @INC if $isNT;
-	$script_suffix = $isNT ? ".bat" : "";
-	$exe_suffix = $isNT ? ".exe" : "";
-	# NT needs quotes around some things unix doesn't
-	$quote = $isNT ? "\"" : "";
-	if ($isNT) {
-		# we have to pass batch files directly to the NT command interpreter
-		$com_spec = $ENV{ComSpec};
-		if (!$com_spec) {
-			$com_spec = $ENV{COMSPEC};
-		}
-		if (!$com_spec || ! -f $com_spec) {
-			# find the first available command interpreter
-			foreach $drive (c..z) {
-				$com_spec = "$drive:\\winnt\\system32\\cmd.exe";
-				last if (-f $com_spec);
-				$com_spec = undef;
-			}
-			if (! $com_spec) {
-				# punt and pray
-				$com_spec = 'c:\winnt\system32\cmd.exe';
-			}
-		}
-		$os = "WINNT";
-	} else {
-		$os = &uname("-s");
-		if ($os eq "SunOS") {
-			$isSolaris9 = ( &uname("-r") eq "5.9" );
-		}
-	}
- 
-	if ( ($os eq "AIX") || ($os eq "HP-UX") ) {
-		$sigChildHandler = 'sigChildHandler';
-	}
-	SWITCH: {
-	    if ($os eq "AIX") {
-		$LIB_PATH = "LIBPATH" ;
-		last SWITCH ;
-	    }
-	    if ($os eq "HP-UX") {
-		$LIB_PATH = "SHLIB_PATH" ;
-		last SWITCH ;
-	    }
-	    if ($isNT) {
-                $LIB_PATH = "PATH" ;
-	        last SWITCH ;
-            }
-            else {
-                $LIB_PATH = "LD_LIBRARY_PATH" ;
-	        last SWITCH ;
-            }
-       }
-	$slapdExecName = $isNT ? 'slapd.exe' : 'ns-slapd';
-	select STDERR;
-	$| = 1;
-	select STDOUT;
-	$| = 1;
-}
-
-
-
-$TRACELEVEL = 0;
-${root}           = "{{DS-ROOT}}" ;   
-${type}           = "" ;               
-${newname}        = "" ; 
-${newport}        = "" ;                                     
-${rootDN}         = "" ;
-${rootpwd}        = "" ;
-${localhost}      = "" ;
-${LogFileReport}  = "" ;
-
-# get input users
-&getParameters() ;  
-
-
-${oldHome}         = "${oldDir}${PATHSEP}$type-$oldname" ;    
-${oldConfDir}      = "${oldHome}${PATHSEP}config${PATHSEP}" ; 
-${oldSlapdConf}    = "${oldConfDir}slapd.conf" ;              
-${serverHome}      = "${root}${PATHSEP}$type-$newname" ;      
-${ldif_rep}        = "${oldConfDir}${PATHSEP}ldif${PATHSEP}" ;
-${curdir}          = getCwd();
-
-
-if (!(-d $serverHome)) {
-    print("\n$serverHome doesn't exist\n");
-    exit(1);
-  }
-  if (!(-d $oldHome)) {
-    print("\n$oldHome doesn't exist\n");
-    exit(1);
-  }
-$ENV{"$LIB_PATH"} = "$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"} ;
-
-# get the version of the DS to migrate
-($oldVersion, $oldMinor) = &getVersion($oldDir);
-# get the version of the new DS
-($Version, $Minor) = &getVersion($root);
-
-if ($Version >= 5) {
-    if ($oldVersion == 4) {
-	$myscript = "migrateTo5" ;
-	printMsg("\n******* Migration from $oldVersion.$oldMinor Netscape Directory Server to $Version.$Minor iPlanet Directory Server *********\n");
-    }
-    elsif ($oldVersion == 5 ) {
-	printMsg("\nWarning. You may experiment some problems considering the version of directory server you want to migrate is not a 5.0") if ($oldMinor != 0);
-	if ($oldMinor > $Minor) {
-	    die "The migration from a version to an oldest one is not supported\nMigration aborted\n";
-	}
-	$myscript = "migrate50to51" ;
-	printMsg("\n******* Migration from $oldVersion.$oldMinor to $Version.$Minor iPlanet Directory Server *********\n");
-    }
-    else {
-	die "We don't support the version of directory server you want to migrate";
-    }
-}
-else {
-    die "\n\nThe version of directory you want to upgrade is not a 5.x product\nMigration aborted\n";
-}
-
-
-
-my $start_time = gmtime ;
-@args = ($, $myscript, @ARGV, '-L', $LogFileReport);
-$exitCode = &mySystem(@args);
-#die "Error: @args: $!" if ($exitCode != 0);
-
-open(LOGFILE,">> $LogFileReport") or die "\nCan't write to $LogFileReport\n$!\n";
-if (! $exitCode) {
-  my $end_time = gmtime ;
-  printMsg("->  Migration started at $start_time\n");
-  printMsg("->  Migration ended at $end_time\n\n");
-}
-printMsg("***********************************************\n\n");
-print("-> The migration report file is available at: $LogFileReport\n\n");
-
-close(LOGFILE);
-
-#######################################################################################################################
-sub usage {
-        print(STDERR "\nUsage: $0 -D rootdn { -w password | -w - | -j filename } -p port \n");
-	print(STDERR "        -o oldInstancePath -n newInstancePath [-t tracelevel] \n");
-	print(STDERR "        [-L logfile] [-noinput]\n");
-        print(STDERR "************** parameters in brackets are optionals, others are required **************\n");
-        print(STDERR " Opts: -D rootdn              - new 5.x Directory Manager\n");
-        print(STDERR "     : -w password            - new 5.x Directory Manager's password\n");
-        print(STDERR "     : -w -                   - Prompt for new 5.x Directory Manager's password\n");
-        print(STDERR "     : -j filename            - Read new 5.x Directory Manager's password from file\n");
-        print(STDERR "     : -p port                - new 5.x Directory Server port\n");
-        print(STDERR "     : -o oldInstancePath     - Path of the old instance to migrate \n");
-        print(STDERR "     : -n newInstancePath     - Path of the new 5.x instance\n");
-        print(STDERR "     : [-t tracelevel]        - specify the level of trace (0..3) by default setup to 1\n");
-        print(STDERR "     : [-L logfile]           - specify the file to log the migration report \n");
-        print(STDERR "     : [-noinput]             - no user interventions during migration processing to solve conflicts\n");
-       
-      }
-
-
-#######################################################################################################################
-# get input users
-
-sub getParameters {
-  my $exit = 0 ;
-  my $i    = 0;
-  my $pwdfile= "";
-
-  while ($i <= $#ARGV) {
-    if ( "$ARGV[$i]" eq "-D" ) { # directory manager
-      if (! $rootDN) {
-	$rootDN = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-w") { # password
-      if (! $rootpwd) {
-	$rootpwd = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-j") { # password file 
-      if (! $pwdfile) {
-	$pwdfile = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-o") { # old instance path
-       if (! $oldHome ) {
-	 $oldHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $oldHome if $isNT ;
-	 if ($oldHome =~ /[\"]?(.*)?[\"]?/) { $oldHome = $1 ; }
-	 if ($oldHome =~ m@^(.*)/([^-/]*)-([^/]*)[/]?$@) {
-	   $oldDir  = $1 ;
-	   $type    = $2 ;
-	   $oldname = $3 ;
-	   if ($isNT) {
-	     $oldDir  = lc($oldDir)     ;
-	     $type    = lc($type)       ;
-	     $oldname = lc($oldname)    ;
-	     $oldHome = lc($oldHome)    ;
-	     grep { s@/@\\@g } $oldDir  ;
-	     grep { s@/@\\@g } $oldHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe old instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-n") { # 5.x instance path
-       if (! $serverHome ) {
-	 $serverHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $root if $isNT ;
-	 grep { s@\\@/@g } $serverHome if $isNT ;
-	 if ($serverHome =~ /[\"]?(.*)?[\"]?/) { $serverHome = $1 ; }
-	 if ($serverHome =~ m@^(.*?)/?([^/-]*)-([^/]*)[/]?$@) {
-	   $root    = $1 if ($1);
-	   $type    = $2 ;
-	   $newname = $3 ;
-	   if ($isNT) {
-	     $root       = lc($root)       ;
-	     $type       = lc($type)       ;
-	     $newname    = lc($newname)    ;
-	     $serverHome = lc($serverHome) ;
-	     grep { s@/@\\@g } $root       ;
-	     grep { s@/@\\@g } $serverHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe 5.x instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-p") { # 5.x DS port 
-      if (! $newport ) {
-	$newport = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-t") { # TRACELEVEL
-      my $value = $ARGV[++$i] ;	
-      if ($value =~ /[0-3]/) {
-	$TRACELEVEL = $value ;
-      }
-      else {
-	print("\nThe tracelevel must belong to 0..3 interval");
-        &usage();
-	exit();
-      }	
-    } elsif ("$ARGV[$i]" eq "-noinput") { # no user interventions during processing
-    } elsif ("$ARGV[$i]" eq "-L") { # user defined logfile for the migration
-	$LogFileReport = $ARGV[++$i];
-    }
-    else {
-      &usage() ;
-      exit(1);
-    }
-    $i++;
-  }
-
-  if (! $rootDN) {
-    print("\nThe rootDN is missing");
-    $exit = 1;
-  }
-  if ($pwdfile ne "") {
-    # Open file and get the password
-    unless (open (RPASS, $pwfile)) {
-      die "Error, cannot open password file $passwdfile\n";
-    }
-    $rootpwd = <RPASS>;
-    chomp($rootpwd);
-    close(RPASS);
-  } elsif ($rootpwd eq "-"){
-    # Read the password from terminal
-    die "The '-w -' option requires an extension library (Term::ReadKey) which is not\n",
-    "part of the standard perl distribution. If you want to use it, you must\n",
-    "download and install the module. You can find it at\n",
-    "http://www.perl.com/CPAN/CPAN.html\n";
-    # Remove the previous line and uncomment the following 6 lines once you have installed Term::ReadKey module.
-# use Term::ReadKey; 
-#	print "Bind Password: ";
-#	ReadMode('noecho'); 
-#	$rootpwd = ReadLine(0); 
-#	chomp($rootpwd);
-#	ReadMode('normal');
-  }
-  if (! $rootpwd) {
-    print("\nThe rootpwd is missing");
-    $exit = 1 ;
-  }
-  if (! $newport) {
-    print("\nThe port is missing");
-    $exit = 1;
-  }
-  if (! $serverHome) {
-    print("\nThe new instance path is missing");
-    $exit = 1;
-  }
-  if (! $oldHome) {
-    print("\nThe old instance path is missing");
-    $exit = 1;
-  }
-  if ((! $LogFileReport) && $serverHome) {
-    ($sec, $min, $hour, $dd, $mm, $yy) = &GetTime();
-    $LogFileReport  = "${serverHome}${PATHSEP}logs${PATHSEP}Migration_${dd}${mm}${yy}_${hour}${min}${sec}.log";
-  }
-  if ($exit) {	
-    &usage() ;
-    exit(1);
-  }
-  
-}
-
-#############################################################################
-# printMsg print message to the user standard output.  
-
-sub printMsg {
-
-  my $TypeMsg = shift ;
-  my $Msg     = shift ;
-  my $LineNb  = shift ;
-  if ($LineNb) {
-      printTrace("Line: $LineNb, $TypeMsg, $Msg");
-  }
-  else {
-      printTrace("$TypeMsg $Msg");
-  }
-}
-
-#############################################################################
-#  print message error to the user standard output.  
-
-sub printTrace {
-
-  my $Msg = shift ;
-  my $level     = shift ;
-  if ($level <= $TRACELEVEL) {
-      print($Msg);
-      print LOGFILE $Msg;
-  }
-
-}  
-
-#############################################################################
-sub mySystem {
-	my $cmd = $_[0];
-	# the system {$cmd} avoids some NT shell quoting problems if the $cmd
-	# needs to be quoted e.g. contains spaces; the map puts double quotes
-	# around the arguments on NT which are stripped by the command
-	# interpreter cmd.exe; but don't quote things which are already quoted
-	my @fixargs = map { /^[\"].*[\"]$/ ? $_ : $quote . $_ . $quote } @_;
-	my $rc = 0;
-	if ($cmd =~ /[.](bat|cmd)$/) {
-		# we have to pass batch files directly to the NT command interpreter
-		$cmd = $com_spec;
-#		print "system $cmd /c \"@fixargs\"\n";
-		$rc = system {$cmd} '/c', "\"@fixargs\"";
-	} else {
-#		print "system $cmd \"@fixargs\"\n";
-		$rc = system {$cmd} @fixargs;
-	}
-
-	return $rc;
-}
-
-#############################################################################
-
-sub GetTime {
-    my $tm = localtime;
-    (my $sec, my $min, my $hour, my $dd, my $mm, my $yy) = ($tm->sec, $tm->min, $tm->hour, $tm->mday, ($tm->mon)+1, ($tm->year)+1900);
-    $sec  = "0$sec"  unless $sec > 9  ;
-    $min  = "0$min"  unless $min > 9  ;
-    $hour = "0$hour" unless $hour > 9 ;
-    $dd   = "0$dd"   unless $dd > 9   ;
-    $mm   = "0$mm"   unless $mm > 9   ;
-    return ($sec, $min, $hour, $dd, $mm, $yy);
-}
-
-#############################################################################
-
-sub getVersion {
-	my $dir         = shift;
-	my $version     = 0;
-	my $minor       = 0;
-	my $buildNumber = 0;
-	my $progDir     = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-	my $progDir2    = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}";
-
-	# find the slapd executable
-	$prog = $dir . $progDir . $slapdExecName;
-	if (! -f $prog) {
-	    $prog = $dir . $progDir2 . $slapdExecName;
-	    if (-f $prog && $isNT) {
-	       	# if slapd is in bin/slapd and we're on NT, just assume version 1;
-	       	# apparently, slapd.exe doesn't like the -v argument . . .
-	       	return ( '1', $minor );
-	    }
-	    else{
-		die "Could not run slapd program $prog: $!";
-	    }
-	}
-	else {
-	    chdir($dir . $progDir);
-	}
-	$ENV{"$LIB_PATH"}="$dir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	# read the old version from the old slapd program
-
-	open(F, "${quote}${quote}$prog${quote} -v${quote} 2>&1 |") or
-		die "Could not run slapd program $prog: $!";
-	sleep(1); # allow some data to accumulate in the pipe
-#	print "Output from $prog -v:\n";
-	while (<F>) {
-		if (/^Netscape-Directory\/(\d+)\.(\d+)\s+(\S+)/) {
-			$version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-		elsif (/^Netscape-Directory\(restrict?ed-mode\)\/(\d+)\.(\d+)\s+(\S+)/) { # we can have restricted-mode or restriced-mode ...
-		        $version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-		elsif (/^iPlanet-Directory\/(\d+)\.(\d+)\s+(\S+)/i) {
-			$version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-	}
-	$code = close(F);
-#	print "$prog returned code=$code status=$?\n";
-	$ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	
-	if ($version == 0) {
-	    die "\nCould not determine version of the directory server in $dir: \n";
-	}
-
-	# distinguish the 4.1 and the 4.11 thanks to the buildNumber
-	if (($version == 4) && ($minor == 1)){
-	    if (! ($buildNumber =~ /^B99\.16/)) {
-		# it's not a 4.1 Netscape Directory Server => it's a 4.11
-		$minor = 11 ;
-	    }
-	}
-	chdir($curdir) or die "Could not change directory to $curdir: $!" ;
-	return ( $version, $minor );
-}
-
-###############################################################################################
-# get current directory
-
-sub getCwd {
-        my $command = $isNT ? "cd" : "/bin/pwd";
-        open(PWDCMD, "$command 2>&1 |") or
-                die "Error: could not execute $command: $!";
-        # without the following sleep, reading from the pipe will
-        # return nothing; I guess it gives the pwd command time
-        # to get some data to read . . .
-        sleep(1);
-        my $currentdir;
-        while (<PWDCMD>) {
-                if (!$currentdir) {
-                        chomp($currentdir = $_);
-                }
-        }
-        my $code = close(PWDCMD);
-#       if ($code || $?) {
-#               print "$command returned code=$code status=$? dir=$curdir\n";
-#       }
-#       print "getCwd curdir=\[$curdir\]\n";
-        return $currentdir;
-}

ldap/admin/src/scripts/template-migrateInstance6

@@ -1,572 +0,0 @@
-#{{PERL-EXEC}}
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-#
-use Time::localtime;
-
-BEGIN {
-	require 'uname.lib';
-	$| = 1;
-	$isNT = -d '\\';
-	$PATHSEP = $isNT ? "\\" : "/";
-        $SEP = $isNT ? ";" : ":" ;
-	$exitCode = 0;
-	@INC = ( '.', '../../../admin/admin/bin');
-	grep { s@/@\\@g } @INC if $isNT;
-	$script_suffix = $isNT ? ".bat" : "";
-	$exe_suffix = $isNT ? ".exe" : "";
-	# NT needs quotes around some things unix doesn't
-	$quote = $isNT ? "\"" : "";
-	if ($isNT) {
-		# we have to pass batch files directly to the NT command interpreter
-		$com_spec = $ENV{ComSpec};
-		if (!$com_spec) {
-			$com_spec = $ENV{COMSPEC};
-		}
-		if (!$com_spec || ! -f $com_spec) {
-			# find the first available command interpreter
-			foreach $drive (c..z) {
-				$com_spec = "$drive:\\winnt\\system32\\cmd.exe";
-				last if (-f $com_spec);
-				$com_spec = undef;
-			}
-			if (! $com_spec) {
-				# punt and pray
-				$com_spec = 'c:\winnt\system32\cmd.exe';
-			}
-		}
-		$os = "WINNT";
-	} else {
-		$os = &uname("-s");
-		if ($os eq "SunOS") {
-			$isSolaris9 = ( &uname("-r") eq "5.9" );
-		}
-	}
- 
-	if ( ($os eq "AIX") || ($os eq "HP-UX") ) {
-		$sigChildHandler = 'sigChildHandler';
-	}
-	SWITCH: {
-	    if ($os eq "AIX") {
-		$LIB_PATH = "LIBPATH" ;
-		last SWITCH ;
-	    }
-	    if ($os eq "HP-UX") {
-		$LIB_PATH = "SHLIB_PATH" ;
-		last SWITCH ;
-	    }
-	    if ($isNT) {
-                $LIB_PATH = "PATH" ;
-	        last SWITCH ;
-            }
-            else {
-                $LIB_PATH = "LD_LIBRARY_PATH" ;
-	        last SWITCH ;
-            }
-       }
-	$slapdExecName = $isNT ? 'slapd.exe' : 'ns-slapd';
-	select STDERR;
-	$| = 1;
-	select STDOUT;
-	$| = 1;
-}
-
-
-
-$TRACELEVEL = 0;
-${root}           = "{{DS-ROOT}}" ;   
-${type}           = "" ;               
-${newname}        = "" ; 
-${newport}        = "" ;                                     
-${rootDN}         = "" ;
-${rootpwd}        = "" ;
-${localhost}      = "" ;
-${LogFileReport}  = "" ;
-
-# get input users
-&getParameters() ;  
-
-
-${oldHome}         = "${oldDir}${PATHSEP}$type-$oldname" ;    
-${oldConfDir}      = "${oldHome}${PATHSEP}config${PATHSEP}" ; 
-${oldSlapdConf}    = "${oldConfDir}slapd.conf" ;              
-${serverHome}      = "${root}${PATHSEP}$type-$newname" ;      
-${ldif_rep}        = "${oldConfDir}ldif${PATHSEP}" ;
-${curdir}          = getCwd();
-
-
-if (!(-d $serverHome)) {
-    print("\n$serverHome doesn't exist\n");
-    exit(1);
-  }
-  if (!(-d $oldHome)) {
-    print("\n$oldHome doesn't exist\n");
-    exit(1);
-  }
-if ($olddatadir && !(-d $olddatadir)) {
-    print("\n$olddatadir doesn't exist\n");
-    exit(1);
-  }
-$ENV{"$LIB_PATH"} = "$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"} ;
-
-# get the version of the DS to migrate
-($oldVersion, $oldMinor) = &getVersion($oldDir, $oldversionstr);
-# get the version of the new DS
-($Version, $Minor) = &getVersion($root);
-
-if ($Version >= 6) {
-  if ($oldVersion == 4) {
-	$myscript = "migrateTo6" ;
-	printMsg("\n******* Migration from $oldVersion.$oldMinor to $Version.$Minor Directory Server *********\n");
-  }
-  elsif ($oldVersion == 5 ) {
-	printMsg("\nWarning. You may experience some problems if the version of directory server you want to migrate is not a 5.0 or 5.1") if ($oldMinor > 1);
-	$myscript = "migrate5to6" ;
-	printMsg("\n******* Migration from $oldVersion.$oldMinor to $Version.$Minor Directory Server *********\n");
-  } else {
-	die "We don't support the version of directory server you want to migrate";
-  }
-}
-else {
-  die "\n\nThe version of directory you want to upgrade is not a 6.x product\nMigration aborted\n";
-}
-
-my $start_time = gmtime ;
-@args = ($^X, $myscript, @ARGV, '-L', $LogFileReport);
-$exitCode = &mySystem(@args);
-#die "Error: @args: $!" if ($exitCode != 0);
-
-open(LOGFILE,">> $LogFileReport") or die "\nCan't write to $LogFileReport\n$!\n";
-if (! $exitCode) {
-  my $end_time = gmtime ;
-  printMsg("->  Migration started at $start_time\n");
-  printMsg("->  Migration ended at $end_time\n\n");
-}
-printMsg("***********************************************\n\n");
-print("-> The migration report file is available at: $LogFileReport\n\n");
-
-close(LOGFILE);
-
-#######################################################################################################################
-sub usage {
-        print(STDERR "\nUsage: $0 -D rootdn { -w password | -w - | -j filename } -p port \n");
-	print(STDERR "        -o oldInstancePath -n newInstancePath [-t tracelevel] \n");
-	print(STDERR "        [-L logfile] [-noinput]\n");
-        print(STDERR "************** parameters in brackets are optionals, others are required **************\n");
-        print(STDERR " Opts: -D rootdn              - new Directory Manager\n");
-        print(STDERR "     : -w password            - new Directory Manager's password\n");
-        print(STDERR "     : -w -                   - Prompt for new Directory Manager's password\n");
-        print(STDERR "     : -j filename            - Read new Directory Manager's password from file\n");
-        print(STDERR "     : -p port                - new Directory Server port\n");
-        print(STDERR "     : -o oldInstancePath     - Path of the old instance to migrate \n");
-        print(STDERR "     : -n newInstancePath     - Path of the new instance\n");
-        print(STDERR "     : [-d dataPath]          - Path to directory containing data files to import into new instance\n");
-        print(STDERR "     : [-v oldVersion]        - Version of old instance (obtained by running $slapdExecName -v\n");
-        print(STDERR "     : [-t tracelevel]        - specify the level of trace (0..3) by default setup to 1\n");
-        print(STDERR "     : [-L logfile]           - specify the file to log the migration report \n");
-        print(STDERR "     : [-noinput]             - no user interventions during migration processing to solve conflicts\n");
-       
-      }
-
-
-#######################################################################################################################
-# get input users
-
-sub getParameters {
-  my $exit = 0 ;
-  my $i    = 0;
-  my $pwdfile= "";
-
-  while ($i <= $#ARGV) {
-    if ( "$ARGV[$i]" eq "-D" ) { # directory manager
-      if (! $rootDN) {
-	$rootDN = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-w") { # password
-      if (! $rootpwd) {
-	$rootpwd = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-j") { # password file 
-      if (! $pwdfile) {
-	$pwdfile = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-o") { # old instance path
-       if (! $oldHome ) {
-	 $oldHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $oldHome if $isNT ;
-	 if ($oldHome =~ /[\"]?(.*)?[\"]?/) { $oldHome = $1 ; }
-	 if ($oldHome =~ m@^(.*)/([^-/]*)-([^/]*)[/]?$@) {
-	   $oldDir  = $1 ;
-	   $type    = $2 ;
-	   $oldname = $3 ;
-	   if ($isNT) {
-	     $oldDir  = lc($oldDir)     ;
-	     $type    = lc($type)       ;
-	     $oldname = lc($oldname)    ;
-	     $oldHome = lc($oldHome)    ;
-	     grep { s@/@\\@g } $oldDir  ;
-	     grep { s@/@\\@g } $oldHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe old instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-n") { # 5.x instance path
-       if (! $serverHome ) {
-	 $serverHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $root if $isNT ;
-	 grep { s@\\@/@g } $serverHome if $isNT ;
-	 if ($serverHome =~ /[\"]?(.*)?[\"]?/) { $serverHome = $1 ; }
-	 if ($serverHome =~ m@^(.*?)/?([^/-]*)-([^/]*)[/]?$@) {
-	   $root    = $1 if ($1);
-	   $type    = $2 ;
-	   $newname = $3 ;
-	   if ($isNT) {
-	     $root       = lc($root)       ;
-	     $type       = lc($type)       ;
-	     $newname    = lc($newname)    ;
-	     $serverHome = lc($serverHome) ;
-	     grep { s@/@\\@g } $root       ;
-	     grep { s@/@\\@g } $serverHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe new instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-p") { # 5.x DS port 
-      if (! $newport ) {
-	$newport = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-d") { # old instance LDIF data dir
-      if (! $olddatadir ) {
-	$olddatadir = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-v") { # old version
-      if (! $oldversionstr ) {
-	$oldversionstr = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-t") { # TRACELEVEL
-      my $value = $ARGV[++$i] ;	
-      if ($value =~ /[0-3]/) {
-	$TRACELEVEL = $value ;
-      }
-      else {
-	print("\nThe tracelevel must belong to 0..3 interval");
-        &usage();
-	exit();
-      }	
-    } elsif ("$ARGV[$i]" eq "-noinput") { # no user interventions during processing
-    } elsif ("$ARGV[$i]" eq "-L") { # user defined logfile for the migration
-	$LogFileReport = $ARGV[++$i];
-    }
-    else {
-      &usage() ;
-      exit(1);
-    }
-    $i++;
-  }
-
-  if (! $rootDN) {
-    print("\nThe rootDN is missing");
-    $exit = 1;
-  }
-  if ($pwdfile ne "") {
-    # Open file and get the password
-    unless (open (RPASS, $pwfile)) {
-      die "Error, cannot open password file $passwdfile\n";
-    }
-    $rootpwd = <RPASS>;
-    chomp($rootpwd);
-    close(RPASS);
-  } elsif ($rootpwd eq "-"){
-    # Read the password from terminal
-    die "The '-w -' option requires an extension library (Term::ReadKey) which is not\n",
-    "part of the standard perl distribution. If you want to use it, you must\n",
-    "download and install the module. You can find it at\n",
-    "http://www.perl.com/CPAN/CPAN.html\n";
-    # Remove the previous line and uncomment the following 6 lines once you have installed Term::ReadKey module.
-# use Term::ReadKey; 
-#	print "Bind Password: ";
-#	ReadMode('noecho'); 
-#	$rootpwd = ReadLine(0); 
-#	chomp($rootpwd);
-#	ReadMode('normal');
-  }
-  if (! $rootpwd) {
-    print("\nThe rootpwd is missing");
-    $exit = 1 ;
-  }
-  if (! $newport) {
-    print("\nThe port is missing");
-    $exit = 1;
-  }
-  if (! $serverHome) {
-    print("\nThe new instance path is missing");
-    $exit = 1;
-  }
-  if (! $oldHome) {
-    print("\nThe old instance path is missing");
-    $exit = 1;
-  }
-  if ((! $LogFileReport) && $serverHome) {
-    ($sec, $min, $hour, $dd, $mm, $yy) = &GetTime();
-    $LogFileReport  = "${serverHome}${PATHSEP}logs${PATHSEP}Migration_${dd}${mm}${yy}_${hour}${min}${sec}.log";
-  }
-  if ($exit) {	
-    &usage() ;
-    exit(1);
-  }
-  
-}
-
-#############################################################################
-# printMsg print message to the user standard output.  
-
-sub printMsg {
-
-  my $TypeMsg = shift ;
-  my $Msg     = shift ;
-  my $LineNb  = shift ;
-  if ($LineNb) {
-      printTrace("Line: $LineNb, $TypeMsg, $Msg");
-  }
-  else {
-      printTrace("$TypeMsg $Msg");
-  }
-}
-
-#############################################################################
-#  print message error to the user standard output.  
-
-sub printTrace {
-
-  my $Msg = shift ;
-  my $level     = shift ;
-  if ($level <= $TRACELEVEL) {
-      print($Msg);
-      print LOGFILE $Msg;
-  }
-
-}  
-
-#############################################################################
-sub mySystem {
-	my $cmd = $_[0];
-	# the system {$cmd} avoids some NT shell quoting problems if the $cmd
-	# needs to be quoted e.g. contains spaces; the map puts double quotes
-	# around the arguments on NT which are stripped by the command
-	# interpreter cmd.exe; but don't quote things which are already quoted
-	my @fixargs = map { /^[\"].*[\"]$/ ? $_ : $quote . $_ . $quote } @_;
-	my $rc = 0;
-	if ($cmd =~ /[.](bat|cmd)$/) {
-		# we have to pass batch files directly to the NT command interpreter
-		$cmd = $com_spec;
-#		print "system $cmd /c \"@fixargs\"\n";
-		$rc = system {$cmd} '/c', "\"@fixargs\"";
-	} else {
-#		print "system $cmd \"@fixargs\"\n";
-		if($isNT) {
-			$rc = system "\"@fixargs\"";
-		} else {
-			$rc = system @fixargs;
-		}
-	}
-
-	return $rc;
-}
-
-#############################################################################
-
-sub GetTime {
-    my $tm = localtime;
-    (my $sec, my $min, my $hour, my $dd, my $mm, my $yy) = ($tm->sec, $tm->min, $tm->hour, $tm->mday, ($tm->mon)+1, ($tm->year)+1900);
-    $sec  = "0$sec"  unless $sec > 9  ;
-    $min  = "0$min"  unless $min > 9  ;
-    $hour = "0$hour" unless $hour > 9 ;
-    $dd   = "0$dd"   unless $dd > 9   ;
-    $mm   = "0$mm"   unless $mm > 9   ;
-    return ($sec, $min, $hour, $dd, $mm, $yy);
-}
-
-#############################################################################
-
-sub getVersion {
-	my $dir         = shift;
-	my $versionstr  = shift;
-	my $version     = 0;
-	my $minor       = 0;
-	my $buildNumber = 0;
-	my $progDir     = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-	my $progDir2    = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}";
-
-	# find the slapd executable
-	if (!$versionstr) { # version not specified on cmd line - find it
-		$prog = $dir . $progDir . $slapdExecName;
-		if (! -f $prog) {
-			$prog = $dir . $progDir2 . $slapdExecName;
-			if (-f $prog && $isNT) {
-				# if slapd is in bin/slapd and we're on NT, just assume version 1;
-				# apparently, slapd.exe doesn't like the -v argument . . .
-				return ( '1', $minor );
-			}
-			else{
-				die "Could not run slapd program $prog: $!";
-			}
-		}
-		else {
-			chdir($dir . $progDir);
-		}
- 		$ENV{"$LIB_PATH"}=
- 			"$dir${PATHSEP}lib${SEP}".
- 			"$dir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}lib${SEP}".
- 			"$dir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${SEP}".
- 			$ENV{"$LIB_PATH"};
-		# read the old version from the old slapd program
-
-		open(F, "${quote}${quote}$prog${quote} -v${quote} 2>&1 |") or
-			die "Could not run slapd program $prog: $!";
-		sleep(1); # allow some data to accumulate in the pipe
-#	print "Output from $prog -v:\n";
-		while (<F>) {
-			if (/^Netscape-Directory/ || /^iPlanet-Directory/i) {
-				$versionstr = $_;
-				last;
-			}
-		}
-		$code = close(F);
-		#	print "$prog returned code=$code status=$?\n";
-		$ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	}
-
-	if ($versionstr =~ /^Netscape-Directory\/(\d+)\.(\d+)(?:b\d)*\s+(\S+)/) {
-		$version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	}
-	elsif ($versionstr =~ /^Netscape-Directory\(restrict?ed-mode\)\/(\d+)\.(\d+)\s+(\S+)/) { # we can have restricted-mode or restriced-mode ...
-        $version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	}
-	elsif ($versionstr =~ /^iPlanet-Directory\/(\d+)\.(\d+)\s+(\S+)/i) {
-		$version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	} elsif ($versionstr =~ /(\d+)\.(\d+)/) {
-		$version     = $1;
-		$minor       = $2;
-	}
-
-	if ($version == 0) {
-	    die "\nCould not determine version of the directory server in $dir: \n";
-	}
-
-	# distinguish the 4.1 and the 4.11 thanks to the buildNumber
-	if (($version == 4) && ($minor == 1)){
-	    if (! ($buildNumber =~ /^B99\.16/)) {
-		# it's not a 4.1 Netscape Directory Server => it's a 4.11
-		$minor = 11 ;
-	    }
-	}
-	chdir($curdir) or die "Could not change directory to $curdir: $!" ;
-	return ( $version, $minor );
-}
-
-###############################################################################################
-# get current directory
-
-sub getCwd {
-        my $command = $isNT ? "cd" : "/bin/pwd";
-        open(PWDCMD, "$command 2>&1 |") or
-                die "Error: could not execute $command: $!";
-        # without the following sleep, reading from the pipe will
-        # return nothing; I guess it gives the pwd command time
-        # to get some data to read . . .
-        sleep(1);
-        my $currentdir;
-        while (<PWDCMD>) {
-                if (!$currentdir) {
-                        chomp($currentdir = $_);
-                }
-        }
-        my $code = close(PWDCMD);
-#       if ($code || $?) {
-#               print "$command returned code=$code status=$? dir=$curdir\n";
-#       }
-#       print "getCwd curdir=\[$curdir\]\n";
-        return $currentdir;
-}

ldap/admin/src/scripts/template-migrateTo5

@@ -1,3147 +0,0 @@
-#{{PERL-EXEC}}
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-#
-
-# enable the use of our bundled perldap with our bundled ldapsdk libraries
-# all of this nonsense can be omitted if the mozldapsdk and perldap are
-# installed in the operating system locations (e.g. /usr/lib /usr/lib/perl5)
-BEGIN {
-	my $sroot = "{{DS-ROOT}}";
-	push @INC, "$sroot/lib/perl/arch", "$sroot/lib/perl";
-	if ($ENV{LD_LIBRARY_PATH}) {
-		$ENV{LD_LIBRARY_PATH} .= ":";
-	}
-	$ENV{LD_LIBRARY_PATH} .= "$sroot/shared/lib";
-	# this is only needed for HP/ux PA-RISC, but it doesn't hurt other platforms
-	if ($ENV{SHLIB_PATH}) {
-		$ENV{SHLIB_PATH} .= ":";
-	}
-	$ENV{SHLIB_PATH} .= "$sroot/shared/lib";
-}
-# Migrate a 4.0 directory server to a 5.x directory server
-
-########################################################################################################
-# enable the use of Perldap functions
-require DynaLoader;
-
-use Getopt::Std;
-use Mozilla::LDAP::Conn;
-use Mozilla::LDAP::Entry;
-use Mozilla::LDAP::LDIF;
-use Mozilla::LDAP::Utils qw(:all);
-use Mozilla::LDAP::API qw(:api :ssl :apiv3 :constant); # Direct access to C API
-use Time::localtime;
-
-########################################################################################################
-use Class::Struct ; # load struct-building module
-
-struct S_index => {
-    names    => '@' ,
-    types    => '@' ,
-    oids     => '@' ,
-    specific => '$'    
-		  };
-
-
-struct S_plugin => {
-    name     => '$' ,
-    type     => '$' ,
-    enable   => '$' ,
-    args     => '@' 
-                  };
-#####################################################################################################
-
-sub usage {
-        print(STDERR "\nUsage: $0 -D rootdn { -w password | -w - | -j filename } -p port \n");
-	print(STDERR "       -o 4.xInstancePath -n 5.xInstancePath [-t tracelevel] [-L logfile]\n");
-        print(STDERR "************** parameters in brackets are optionals, others are required **************\n");
-        print(STDERR " Opts: -D rootdn              - 5.x Directory Manager\n");
-        print(STDERR "     : -w password            - 5.x Directory Manager's password\n");
-        print(STDERR "     : -w -                   - Prompt for 5.x Directory Manager's password\n");
-        print(STDERR "     : -j filename            - Read 5.x Directory Manager's password from file\n");
-        print(STDERR "     : -p port                - 5.x Directory Server port\n");
-        print(STDERR "     : -o 4.xInstancePath     - Path of the 4.x instance to migrate \n");
-        print(STDERR "     : -n 5.xInstancePath     - Path of the new 5.x instance\n");
-        print(STDERR "     : [-t tracelevel]        - specify the level of trace (0..3)\n");
-        print(STDERR "     : [-L logfile]           - specify the file to log the migration report \n");
-	
-       
-      }
-
-
-
-#############
-BEGIN {
-  
-  require 'uname.lib' ;
-  $isNT = -d '\\';
-  $PATHSEP = $isNT ? "\\" : "/";
-  ${SEP} = $isNT ? ";" : ":" ; 
-  @INC = ( '.', '../../../admin/admin/bin');
-  grep { s@/@\\@g } @INC if $isNT;
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-  # NT needs quotes around some things unix doesn't
-  $quote = $isNT ? "\"" : "";
-
-  # If this variable is set, all file/directory creation will make sure the mode
-  # and ownership of the destination is the same as the source
-  $PRESERVE = 1 if (!$isNT);
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-    if ($isNT) {
-		$os = "WINNT";
-    } else {
-    	$os = &uname("-s");
-    }
-	if ($isNT) {
-		# we have to pass batch files directly to the NT command interpreter
-		$com_spec = $ENV{ComSpec};
-		if (!$com_spec) {
-			$com_spec = $ENV{COMSPEC};
-		}
-		if (!$com_spec || ! -f $com_spec) {
-			# find the first available command interpreter
-			foreach $drive (c..z) {
-				$com_spec = "$drive:\\winnt\\system32\\cmd.exe";
-				last if (-f $com_spec);
-				$com_spec = undef;
-			}
-			if (! $com_spec) {
-				# punt and pray
-				$com_spec = 'c:\winnt\system32\cmd.exe';
-			}
-		}
-	}
-    if ( $os eq "AIX" ) {
-		$dll_suffix = "_shr.a";
-    }	
-    elsif ( $os eq "HP-UX" ) {
-	$arch = &uname("-p");
-	if ( $arch eq "ia64" ) {
-		$dll_suffix = ".so";
-	} else {
-		$dll_suffix = ".sl";
-	}
-    }	
-    elsif ( $os eq "WINNT" ) {
-		$dll_suffix = ".dll";
-    }	
-    else {
-		$dll_suffix = ".so";
-    }	
-	$slapdExecName = $isNT ? 'slapd.exe' : 'ns-slapd';
-	# if this flag is set, we will migrate the 4.x database
-	# by doing a db2ldif -> ldif2db; 
-	$convertToLDIF = 1;
-	select STDERR;
-	$| = 1;
-	select STDOUT;
-	$| = 1;
-	# if the old value for dbcachesize is less than this, make it this
-	$MIN_DBCACHESIZE = '500000';
-}
-
-SWITCH: {
-	    if ($os eq "AIX") {
-		$LIB_PATH = "LIBPATH" ;
-		last SWITCH ;
-	    }
-	    if ($os eq "HP-UX") {
-		$LIB_PATH = "SHLIB_PATH" ;
-		last SWITCH ;
-	    }
-	    if ($isNT) {
-                $LIB_PATH = "PATH" ;
-	        last SWITCH ;
-            }
-            else {
-                $LIB_PATH = "LD_LIBRARY_PATH" ;
-	        last SWITCH ;
-            }
-       }  
-
-  # 4.x parameters
-  ${oldDir}         = "" ;                
-  ${oldname}        = "" ;             
-  ${oldHome}        = "" ;   
-  ${oldConfDir}     = "" ;
-  ${oldlocaluser} ;
-  ${olduid} ;
-  ${oldgid} ;
-
-  # 5.x parameters            
-  ${root}           = "{{DS-ROOT}}" ;               
-  ${type}           = "" ;               
-  ${newname}        = "" ; 
-  ${newport}        = "" ;                                     
-  ${rootDN}         = "" ;
-  ${rootpwd}        = "" ;
-  ${localhost}      = "" ;
-  ${LogFileReport}  = "" ;
-  ${newuid} ;
-  ${localuser} ;
-  ${newgid} ;
-  $NO_INPUT_USER    = 0  ; # by default user can give inputs during the migration process
-  ${curdir}          = getCwd();
-  ${slapdExecDir}    = "${root}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-
-  # specify the level of trace
-  $TRACELEVEL=1;
-
-  # get input users
-  &getParameters() ;
-  ${oldDir}          = &normalizeDir("${oldDir}");
-  ${oldHome}         = "${oldDir}${PATHSEP}$type-$oldname" ;    
-  ${oldConfDir}      = "${oldHome}${PATHSEP}config${PATHSEP}" ; 
-  ${oldSlapdConf}    = "${oldConfDir}slapd.conf" ;
-  ${oldDSEldif}      = "${oldConfDir}dse.ldif" ;        
-  ${serverHome}      = "${root}${PATHSEP}$type-$newname" ;
-  ${DSEldif}         = "$serverHome${PATHSEP}config${PATHSEP}dse.ldif";
-  ${ldif_rep}        = "${oldConfDir}${PATHSEP}ldif${PATHSEP}" ; 
-  ${oldSlapdExecDir} = "${oldDir}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-  
- 
-  
-  
-  open(LOGFILE, ">> $LogFileReport");
-
-  printTrace("\noldDir: $oldDir, oldHome: $oldHome, \noldConfDir: $oldConfDir, \noldSlapdConf: $oldSlapdConf, \nldif_rep: $ldif_rep, \nrootDN: $rootDN, \nPwd: ******, \nPort: $newport, \nNewname: $newname\n",3);
-  printTrace("\nLIB_PATH: $LIB_PATH",4);
-
-  if (!(-d $serverHome)) {
-    printMsg("\n$serverHome doesn't exist\n");
-    exit(1);
-  }
-  if (!(-d $oldHome)) {
-    printMsg("\n$oldHome doesn't exist\n");
-    exit(1);
-  }
-
-#define CONFIG_DATABASE_DIRECTIVE       "database"
-#define CONFIG_DATABASE_ATTRIBUTE       "nsslapd-database"
-#define CONFIG_PLUGIN_DIRECTIVE         "plugin"
-#define CONFIG_PLUGIN_ATTRIBUTE         "nsslapd-plugin"
-#define CONFIG_SIZELIMIT_DIRECTIVE      "sizelimit"
-#define CONFIG_SIZELIMIT_ATTRIBUTE      "nsslapd-sizelimit"
-#define CONFIG_ORCAUTO_DIRECTIVE        "orcauto"
-#define CONFIG_ORCAUTO_ATTRIBUTE        "nsslapd-orcauto"
-#define CONFIG_TIMELIMIT_DIRECTIVE      "timelimit"
-#define CONFIG_TIMELIMIT_ATTRIBUTE      "nsslapd-timelimit"
-#define CONFIG_SUFFIX_DIRECTIVE         "suffix"
-#define CONFIG_SUFFIX_ATTRIBUTE         "nsslapd-suffix"
-#define CONFIG_READONLY_DIRECTIVE       "readonly"
-#define CONFIG_READONLY_ATTRIBUTE       "nsslapd-readonly"
-#define CONFIG_REFERRAL_DIRECTIVE       "referral"
-#define CONFIG_REFERRAL_ATTRIBUTE       "nsslapd-referral"
-#define CONFIG_OBJECTCLASS_DIRECTIVE    "objectclass"
-#define CONFIG_OBJECTCLASS_ATTRIBUTE    "nsslapd-objectclass"
-#define CONFIG_ATTRIBUTE_DIRECTIVE      "attribute"
-#define CONFIG_ATTRIBUTE_ATTRIBUTE      "nsslapd-attribute"
-#define CONFIG_SCHEMACHECK_DIRECTIVE    "schemacheck"
-#define CONFIG_SCHEMACHECK_ATTRIBUTE    "nsslapd-schemacheck"
-#define CONFIG_LOGLEVEL_DIRECTIVE       "loglevel"
-#define CONFIG_LOGLEVEL_ATTRIBUTE       "nsslapd-errorlog-level"
-#define CONFIG_ACCESSLOGLEVEL_DIRECTIVE "accessloglevel"
-#define CONFIG_ACCESSLOGLEVEL_ATTRIBUTE "nsslapd-accesslog-level"
-#define CONFIG_ACCESSLOG_MAXNUMOFLOGSPERDIR_DIRECTIVE "accesslog-maxNumOfLogsPerDir"
-#define CONFIG_ACCESSLOG_MAXNUMOFLOGSPERDIR_ATTRIBUTE "nsslapd-accesslog-maxlogsperdir"
-#define CONFIG_ERRORLOG_MAXNUMOFLOGSPERDIR_DIRECTIVE  "errorlog-maxNumOfLogsPerDir"
-#define CONFIG_ERRORLOG_MAXNUMOFLOGSPERDIR_ATTRIBUTE  "nsslapd-errorlog-maxlogsperdir"
-#define CONFIG_AUDITLOG_MAXNUMOFLOGSPERDIR_DIRECTIVE  "auditlog-maxNumOfLogsPerDir"
-#define CONFIG_AUDITLOG_MAXNUMOFLOGSPERDIR_ATTRIBUTE  "nsslapd-auditlog-maxlogsperdir"
-#define CONFIG_ACCESSLOG_MAXLOGSIZE_DIRECTIVE "accesslog-maxlogsize"
-#define CONFIG_ACCESSLOG_MAXLOGSIZE_ATTRIBUTE "nsslapd-accesslog-maxlogsize"
-#define CONFIG_ERRORLOG_MAXLOGSIZE_DIRECTIVE "errorlog-maxlogsize"
-#define CONFIG_ERRORLOG_MAXLOGSIZE_ATTRIBUTE "nsslapd-errorlog-maxlogsize"
-#define CONFIG_AUDITLOG_MAXLOGSIZE_DIRECTIVE "auditlog-maxlogsize"
-#define CONFIG_AUDITLOG_MAXLOGSIZE_ATTRIBUTE "nsslapd-auditlog-maxlogsize"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIME_DIRECTIVE "accesslog-logrotationtime"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIME_ATTRIBUTE "nsslapd-accesslog-logrotationtime"
-#define CONFIG_ERRORLOG_LOGROTATIONTIME_DIRECTIVE "errorlog-logrotationtime"
-#define CONFIG_ERRORLOG_LOGROTATIONTIME_ATTRIBUTE "nsslapd-errorlog-logrotationtime"
-#define CONFIG_AUDITLOG_LOGROTATIONTIME_DIRECTIVE "auditlog-logrotationtime"
-#define CONFIG_AUDITLOG_LOGROTATIONTIME_ATTRIBUTE "nsslapd-auditlog-logrotationtime"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIMEUNIT_DIRECTIVE "accesslog-logrotationtimeunit"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIMEUNIT_ATTRIBUTE "nsslapd-accesslog-logrotationtimeunit"
-#define CONFIG_ERRORLOG_LOGROTATIONTIMEUNIT_DIRECTIVE "errorlog-logrotationtimeunit"
-#define CONFIG_ERRORLOG_LOGROTATIONTIMEUNIT_ATTRIBUTE "nsslapd-errorlog-logrotationtimeunit"
-#define CONFIG_AUDITLOG_LOGROTATIONTIMEUNIT_DIRECTIVE "auditlog-logrotationtimeunit"
-#define CONFIG_AUDITLOG_LOGROTATIONTIMEUNIT_ATTRIBUTE "nsslapd-auditlog-logrotationtimeunit"
-#define CONFIG_ACCESSLOG_MAXLOGDISKSPACE_DIRECTIVE "accesslog-maxlogdiskspace"
-#define CONFIG_ACCESSLOG_MAXLOGDISKSPACE_ATTRIBUTE "nsslapd-accesslog-logmaxdiskspace"
-#define CONFIG_ERRORLOG_MAXLOGDISKSPACE_DIRECTIVE "errorlog-maxlogdiskspace"
-#define CONFIG_ERRORLOG_MAXLOGDISKSPACE_ATTRIBUTE "nsslapd-errorlog-logmaxdiskspace"
-#define CONFIG_AUDITLOG_MAXLOGDISKSPACE_DIRECTIVE "auditlog-maxlogdiskspace"
-#define CONFIG_AUDITLOG_MAXLOGDISKSPACE_ATTRIBUTE "nsslapd-auditlog-logmaxdiskspace"
-#define CONFIG_ACCESSLOG_MINFREEDISKSPACE_DIRECTIVE "accesslog-minfreediskspace"
-#define CONFIG_ACCESSLOG_MINFREEDISKSPACE_ATTRIBUTE "nsslapd-accesslog-logminfreediskspace"
-#define CONFIG_ERRORLOG_MINFREEDISKSPACE_DIRECTIVE "errorlog-minfreediskspace"
-#define CONFIG_ERRORLOG_MINFREEDISKSPACE_ATTRIBUTE "nsslapd-errorlog-logminfreediskspace"
-#define CONFIG_AUDITLOG_MINFREEDISKSPACE_DIRECTIVE "auditlog-minfreediskspace"
-#define CONFIG_AUDITLOG_MINFREEDISKSPACE_ATTRIBUTE "nsslapd-auditlog-logminfreediskspace"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIME_DIRECTIVE "accesslog-logexpirationtime"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIME_ATTRIBUTE "nsslapd-accesslog-logexpirationtime"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIME_DIRECTIVE "errorlog-logexpirationtime"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIME_ATTRIBUTE "nsslapd-errorlog-logexpirationtime"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIME_DIRECTIVE "auditlog-logexpirationtime"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIME_ATTRIBUTE "nsslapd-auditlog-logexpirationtime"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIMEUNIT_DIRECTIVE "accesslog-logexpirationtimeunit"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIMEUNIT_ATTRIBUTE "nsslapd-accesslog-logexpirationtimeunit"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIMEUNIT_DIRECTIVE "errorlog-logexpirationtimeunit"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIMEUNIT_ATTRIBUTE "nsslapd-errorlog-logexpirationtimeunit"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIMEUNIT_DIRECTIVE "auditlog-logexpirationtimeunit"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIMEUNIT_ATTRIBUTE "nsslapd-auditlog-logexpirationtimeunit"
-#define CONFIG_ACCESSLOG_LOGGING_ENABLED_DIRECTIVE "accesslog-logging-enabled"
-#define CONFIG_ACCESSLOG_LOGGING_ENABLED_ATTRIBUTE "nsslapd-accesslog-logging-enabled"
-#define CONFIG_ERRORLOG_LOGGING_ENABLED_DIRECTIVE "errorlog-logging-enabled"
-#define CONFIG_ERRORLOG_LOGGING_ENABLED_ATTRIBUTE "nsslapd-errorlog-logging-enabled"
-#define CONFIG_AUDITLOG_LOGGING_ENABLED_DIRECTIVE "auditlog-logging-enabled"
-#define CONFIG_AUDITLOG_LOGGING_ENABLED_ATTRIBUTE "nsslapd-auditlog-logging-enabled"
-#define CONFIG_ROOTDN_DIRECTIVE "rootdn"
-#define CONFIG_ROOTDN_ATTRIBUTE "nsslapd-rootdn"
-#define CONFIG_ROOTPW_DIRECTIVE "rootpw"
-#define CONFIG_ROOTPW_ATTRIBUTE "nsslapd-rootpw"
-#define CONFIG_ROOTPWSTORAGESCHEME_DIRECTIVE "rootpwstoragescheme"
-#define CONFIG_ROOTPWSTORAGESCHEME_ATTRIBUTE "nsslapd-rootpwstoragescheme"
-#define CONFIG_UPDATEDN_DIRECTIVE "updatedn"
-#define CONFIG_UPDATEDN_ATTRIBUTE "nsslapd-updatedn"
-#define CONFIG_UPDATEPW_DIRECTIVE "updatepw"
-#define CONFIG_UPDATEPW_ATTRIBUTE "nsslapd-updatepw"
-#define CONFIG_UPDATESSLCLIENT_DIRECTIVE "updateSSLclient"
-#define CONFIG_UPDATESSLCLIENT_ATTRIBUTE "nsslapd-updateSSLclient"
-#define CONFIG_AUDITFILE_DIRECTIVE "auditfile"
-#define CONFIG_AUDITFILE_ATTRIBUTE "nsslapd-auditlog"
-#define CONFIG_LASTMOD_DIRECTIVE   "lastmod"
-#define CONFIG_LASTMOD_ATTRIBUTE   "nsslapd-lastmod"
-#define CONFIG_INCLUDE_DIRECTIVE   "include"
-#define CONFIG_INCLUDE_ATTRIBUTE   "nsslapd-include"
-#define CONFIG_DYNAMICCONF_DIRECTIVE "dynamicconf"
-#define CONFIG_DYNAMICCONF_ATTRIBUTE "nsslapd-dynamicconf"
-#define CONFIG_USEROC_DIRECTIVE "useroc"
-#define CONFIG_USEROC_ATTRIBUTE "nsslapd-useroc"
-#define CONFIG_USERAT_DIRECTIVE "userat"
-#define CONFIG_USERAT_ATTRIBUTE "nsslapd-userat"
-#define CONFIG_SVRTAB_DIRECTIVE "svrtab"
-#define CONFIG_SVRTAB_ATTRIBUTE "nsslapd-svrtab"
-#ifndef _WIN32
-#define CONFIG_LOCALUSER_DIRECTIVE "localuser"
-#define CONFIG_LOCALUSER_ATTRIBUTE "nsslapd-localuser"
-#endif /* !_WIN32 */
-#define CONFIG_LOCALHOST_DIRECTIVE "localhost"
-#define CONFIG_LOCALHOST_ATTRIBUTE "nsslapd-localhost"
-#define CONFIG_PORT_DIRECTIVE "port"
-#define CONFIG_PORT_ATTRIBUTE "nsslapd-port"
-#define CONFIG_LISTENHOST_DIRECTIVE "listenhost"
-#define CONFIG_LISTENHOST_ATTRIBUTE "nsslapd-listenhost"
-#define CONFIG_SECURITY_DIRECTIVE "security"
-#define CONFIG_SECURITY_ATTRIBUTE "nsslapd-security"
-#define CONFIG_SSL3CIPHERS_DIRECTIVE "SSL3ciphers"
-#define CONFIG_SSL3CIPHERS_ATTRIBUTE "nsslapd-SSL3ciphers"
-#define CONFIG_ACCESSLOG_DIRECTIVE "accesslog"
-#define CONFIG_ACCESSLOG_ATTRIBUTE "nsslapd-accesslog"
-#define CONFIG_ERRORLOG_DIRECTIVE "errorlog"
-#define CONFIG_ERRORLOG_ATTRIBUTE "nsslapd-errorlog"
-#define CONFIG_INSTANCEDIR_DIRECTIVE "instancedir"
-#define CONFIG_INSTANCEDIR_ATTRIBUTE "nsslapd-instancedir"
-#define CONFIG_SECUREPORT_DIRECTIVE "secure-port"
-#define CONFIG_SECUREPORT_ATTRIBUTE "nsslapd-securePort"
-#define CONFIG_SECURELISTENHOST_DIRECTIVE "secure-listenhost"
-#define CONFIG_SECURELISTENHOST_ATTRIBUTE "nsslapd-securelistenhost"
-#define CONFIG_THREADNUMBER_DIRECTIVE "threadnumber"
-#define CONFIG_THREADNUMBER_ATTRIBUTE "nsslapd-threadnumber"
-#define CONFIG_MAXTHREADSPERCONN_DIRECTIVE "maxthreadsperconn"
-#define CONFIG_MAXTHREADSPERCONN_ATTRIBUTE "nsslapd-maxthreadsperconn"
-#if !defined(_WIN32) && !defined(AIX)
-#define CONFIG_MAXDESCRIPTORS_DIRECTIVE "maxdescriptors"
-#define CONFIG_MAXDESCRIPTORS_ATTRIBUTE "nsslapd-maxdescriptors"
-#endif /* !_WIN32 && ! AIX */
-#define CONFIG_RESERVEDESCRIPTORS_DIRECTIVE "reservedescriptors"
-#define CONFIG_RESERVEDESCRIPTORS_ATTRIBUTE "nsslapd-reservedescriptors"
-#define CONFIG_IDLETIMEOUT_DIRECTIVE "idletimeout"
-#define CONFIG_IDLETIMEOUT_ATTRIBUTE "nsslapd-idletimeout"
-#define CONFIG_IOBLOCKTIMEOUT_DIRECTIVE "ioblocktimeout"
-#define CONFIG_IOBLOCKTIMEOUT_ATTRIBUTE "nsslapd-ioblocktimeout"
-#define CONFIG_NTSYNCH_DIRECTIVE "ntsynch"
-#define CONFIG_NTSYNCH_ATTRIBUTE "nsslapd-NTSynch"
-#define CONFIG_NTSYNCHUSESSL_DIRECTIVE "ntsynchusessl"
-#define CONFIG_NTSYNCHUSESSL_ATTRIBUTE "nsslapd-NTSynch-SSL"
-#define CONFIG_NTSYNCHPORT_DIRECTIVE "ntsynch-port"
-#define CONFIG_NTSYNCHPORT_ATTRIBUTE "nsslapd-NTSynch-port"
-#define CONFIG_ACCESSCONTROL_DIRECTIVE "accesscontrol"
-#define CONFIG_ACCESSCONTROL_ATTRIBUTE "nsslapd-accesscontrol"
-#define CONFIG_GROUPEVALNESTLEVEL_DIRECTIVE "groupevalnestlevel" 
-#define CONFIG_GROUPEVALNESTLEVEL_ATTRIBUTE "nsslapd-groupevalnestlevel"
-#define CONFIG_NAGLE_DIRECTIVE "nagle"
-#define CONFIG_NAGLE_ATTRIBUTE "nsslapd-nagle"
-#define CONFIG_PW_CHANGE_DIRECTIVE "pw_change"
-#define CONFIG_PW_CHANGE_ATTRIBUTE "passwordChange"
-#define CONFIG_PW_MUSTCHANGE_DIRECTIVE "pw_must_change"
-#define CONFIG_PW_MUSTCHANGE_ATTRIBUTE "passwordMustChange"
-#define CONFIG_PW_SYNTAX_DIRECTIVE "pw_syntax"
-#define CONFIG_PW_SYNTAX_ATTRIBUTE "passwordCheckSyntax"
-#define CONFIG_PW_MINLENGTH_DIRECTIVE "pw_minlength"
-#define CONFIG_PW_MINLENGTH_ATTRIBUTE "passwordMinLength"
-#define CONFIG_PW_EXP_DIRECTIVE "pw_exp"
-#define CONFIG_PW_EXP_ATTRIBUTE "passwordExp"
-#define CONFIG_PW_MAXAGE_DIRECTIVE "pw_maxage"
-#define CONFIG_PW_MAXAGE_ATTRIBUTE "passwordMaxAge"
-#define CONFIG_PW_MINAGE_DIRECTIVE "pw_minage"
-#define CONFIG_PW_MINAGE_ATTRIBUTE "passwordMinAge"
-#define CONFIG_PW_WARNING_DIRECTIVE "pw_warning"
-#define CONFIG_PW_WARNING_ATTRIBUTE "passwordWarning"
-#define CONFIG_PW_HISTORY_DIRECTIVE "pw_history"
-#define CONFIG_PW_HISTORY_ATTRIBUTE "passwordHistory"
-#define CONFIG_PW_INHISTORY_DIRECTIVE "pw_inhistory"
-#define CONFIG_PW_INHISTORY_ATTRIBUTE "passwordInHistory"
-#define CONFIG_PW_LOCKOUT_DIRECTIVE "pw_lockout"
-#define CONFIG_PW_LOCKOUT_ATTRIBUTE "passwordLockout"
-#define CONFIG_PW_STORAGESCHEME_DIRECTIVE "pw_storagescheme"
-#define CONFIG_PW_STORAGESCHEME_ATTRIBUTE "passwordStorageScheme"
-#define CONFIG_PW_MAXFAILURE_DIRECTIVE "pw_maxfailure"
-#define CONFIG_PW_MAXFAILURE_ATTRIBUTE "passwordMaxFailure"
-#define CONFIG_PW_UNLOCK_DIRECTIVE "pw_unlock"
-#define CONFIG_PW_UNLOCK_ATTRIBUTE "passwordUnlock"
-#define CONFIG_PW_LOCKDURATION_DIRECTIVE "pw_lockduration"
-#define CONFIG_PW_LOCKDURATION_ATTRIBUTE "passwordLockoutDuration"
-#define CONFIG_PW_RESETFAILURECOUNT_DIRECTIVE "pw_resetfailurecount"
-#define CONFIG_PW_RESETFAILURECOUNT_ATTRIBUTE "passwordResetFailureCount"
-#define CONFIG_ACCESSLOG_BUFFERING_DIRECTIVE "logbuffering"
-#define CONFIG_ACCESSLOG_BUFFERING_ATTRIBUTE "nsslapd-accesslog-logbuffering"
-#define CONFIG_CHANGELOG_DIR_DIRECTIVE        "changelogdir"
-#define CONFIG_CHANGELOG_DIR_ATTRIBUTE        "nsslapd-changelogdir"
-#define CONFIG_CHANGELOG_SUFFIX_DIRECTIVE     "changelogsuffix"
-#define CONFIG_CHANGELOG_SUFFIX_ATTRIBUTE     "nsslapd-changelogsuffix"
-#define CONFIG_CHANGELOG_MAXENTRIES_DIRECTIVE "changelogmaxextries"
-#define CONFIG_CHANGELOG_MAXENTRIES_ATTRIBUTE  "nsslapd-changelogmaxentries"
-#define CONFIG_CHANGELOG_MAXAGE_DIRECTIVE     "changelogmaxage"
-#define CONFIG_CHANGELOG_MAXAGE_ATTRIBUTE     "nsslapd-changelogmaxage"
-#define CONFIG_RETURN_EXACT_CASE_DIRECTIVE "return_exact_case"
-#define CONFIG_RESULT_TWEAK_DIRECTIVE "result_tweak"
-#define CONFIG_REFERRAL_MODE_DIRECTIVE		"referralmode"
-#define CONFIG_ATTRIBUTE_NAME_EXCEPTION_DIRECTIVE "attribute_name_exceptions"
-#define CONFIG_MAXBERSIZE_DIRECTIVE "maxbersize"
-#define CONFIG_VERSIONSTRING_DIRECTIVE "versionstring"
-#define CONFIG_ENQUOTE_SUP_OC_DIRECTIVE "enquote_sup_oc"
-#define CONFIG_ENQUOTE_SUP_OC_ATTRIBUTE "nsslapd-enquote_sup_oc"
-#define CONFIG_BASEDN_DIRECTIVE "certmap-basedn"
-#define CONFIG_BASEDN_ATTRIBUTE "nsslapd-certmap-basedn"
-
-%HashParametersName = ();
-
-# The following hash displays only general server parameters to migrate under cn=config
-%GeneralSrvParamToMigrate = (
-		       'accesscontrol'                   => 'nsslapd-accesscontrol',
-		       'errorlog-logging-enabled'        => 'nsslapd-errorlog-logging-enabled',
-		       'accesslog-logging-enabled'       => 'nsslapd-accesslog-logging-enabled',
-		       'auditlog-logging-enabled'        => 'nsslapd-auditlog-logging-enabled',
-		       'logbuffering'                    => 'nsslapd-accesslog-logbuffering',
-		       'accesslog-logexpirationtime'     => 'nsslapd-accesslog-logexpirationtime',
-		       'accesslog-logexpirationtimeunit' => 'nsslapd-accesslog-logexpirationtimeunit',
-		       'accesslog-maxlogdiskspace'       => 'nsslapd-accesslog-logmaxdiskspace',
-		       'accesslog-minfreediskspace'      => 'nsslapd-accesslog-logminfreediskspace',
-		       'accesslog-logrotationtime'       => 'nsslapd-accesslog-logrotationtime',
-		       'accesslog-logrotationtimeunit'   => 'nsslapd-accesslog-logrotationtimeunit',
-		       'accesslog-maxlogsize'            => 'nsslapd-accesslog-maxlogsize',
-		       'accesslog-maxnumoflogsperdir'    => 'nsslapd-accesslog-maxLogsPerDir',
-		       'auditlog-logexpirationtime'      => 'nsslapd-auditlog-logexpirationtime',
-		       'auditlog-logexpirationtimeunit'  => 'nsslapd-auditlog-logexpirationtimeunit',
-		       'auditlog-maxlogdiskspace'        => 'nsslapd-auditlog-logmaxdiskspace',
-		       'auditlog-minfreediskspace'       => 'nsslapd-auditlog-logminfreediskspace',
-		       'auditlog-logrotationtime'        => 'nsslapd-auditlog-logrotationtime',
-		       'auditlog-logrotationtimeunit'    => 'nsslapd-auditlog-logrotationtimeunit',
-		       'auditlog-maxlogsize'             => 'nsslapd-auditlog-maxlogsize',
-		       'auditlog-maxnumoflogsperdir'     => 'nsslapd-auditlog-maxLogsPerDir',
-		       'certmap-basedn'                  => 'nsslapd-certmap-basedn',
-		       'enquote_sup_oc'                  => 'nsslapd-enquote-sup-oc',
-		       'loglevel'                        => 'nsslapd-errorlog-level',
-		       'errorlog-logexpirationtime'      => 'nsslapd-errorlog-logexpirationtime',
-		       'errorlog-logexpirationtimeunit'  => 'nsslapd-errorlog-logexpirationtimeunit',
-		       'errorlog-maxlogdiskspace'        => 'nsslapd-errorlog-logmaxdiskspace',
-		       'errorlog-minfreediskspace'       => 'nsslapd-errorlog-logminfreediskspace',
-		       'errorlog-logrotationtime'        => 'nsslapd-errorlog-logrotationtime',
-		       'errorlog-logrotationtimeunit'    => 'nsslapd-errorlog-logrotationtimeunit',
-		       'errorlog-maxlogsize'             => 'nsslapd-errorlog-maxlogsize',
-		       'errorlog-maxnumoflogsperdir'     => 'nsslapd-errorlog-maxlogsperdir',
-		       'idletimeout'                     => 'nsslapd-idletimeout',
-		       'ioblocktimeout'                  => 'nsslapd-ioblocktimeout',
-		       'lastmod'                         => 'nsslapd-lastmod',
-		       'listenhost'                      => 'nsslapd-listenhost',
-		       'maxdescriptors'                  => 'nsslapd-maxdescriptors',
-		       'referral'                        => 'nsslapd-referral',
-		       'reservedescriptors'              => 'nsslapd-reservedescriptors',
-		       'rootpwstoragescheme'             => 'nsslapd-rootpwstoragescheme',
-		       'schemacheck'                     => 'nsslapd-schemacheck',
-		       'secure-port'                     => 'nsslapd-securePort',
-		       'security'                        => 'nsslapd-security',
-		       'sizelimit'                       => 'nsslapd-sizelimit',
-		       'SSL3ciphers'                     => 'nsslapd-SSL3ciphers',
-		       'timelimit'                       => 'nsslapd-timelimit',
-		       'pw_change'                       => 'passwordChange',
-		       'pw_syntax'                       => 'passwordCheckSyntax',
-		       'pw_exp'                          => 'passwordExp',
-		       'pw_history'                      => 'passwordHistory',
-		       'pw_inhistory'                    => 'passwordInHistory',
-		       'pw_lockout'                      => 'passwordLockout',
-		       'pw_lockduration'                 => 'passwordLockoutDuration',
-		       'pw_maxage'                       => 'passwordMaxAge',
-		       'pw_maxfailure'                   => 'passwordMaxFailure',
-		       'pw_minage'                       => 'passwordMinAge',
-		       'pw_minlength'                    => 'passwordMinLength',
-		       'pw_must_change'                  => 'passwordMustChange',
-		       'pw_resetfailurecount'            => 'passwordResetFailureCount',
-		       'pw_storagescheme'                => 'passwordStorageScheme',
-		       'pw_unlock'                       => 'passwordUnlock',
-		       'pw_warning'                      => 'passwordWarning'
-);
-
-# the following hash displays global parameters related to database stored under cn=config,cn=ldbm database,cn=plugins,cn=config
-%GlobalConfigLDBMparamToMigrate = (
-		       'allidsthreshold'                 => 'nsslapd-allidsthreshold',
-		       'lookthroughlimit'                => 'nsslapd-lookthroughlimit',
-		       'mode'                            => 'nsslapd-mode',
-		       'dbcachesize'                     => 'nsslapd-dbcachesize'
-);
-
-# the following hash displays specific parameters to each backends and  stored under cn=DBname,cn=ldbm database,cn=plugins,cn=config
-%LDBMparamToMigrate = (
-		       'cachesize'                       => 'nsslapd-cachesize',
-		       'readonly'                        => 'nsslapd-readonly'
-);
-
-%stdIncludes = (
-		"${oldConfDir}slapd.at.conf", "\n",
-		"${oldConfDir}slapd.oc.conf", "\n",
-		"${oldConfDir}java-object-schema.conf", "\n",
-		"${oldConfDir}ns-admin-schema.conf", "\n",
-		"${oldConfDir}ns-calendar-schema.conf", "\n",
-		"${oldConfDir}ns-certificate-schema.conf", "\n",
-		"${oldConfDir}ns-common-schema.conf", "\n",
-		"${oldConfDir}ns-compass-schema.conf", "\n",
-		"${oldConfDir}ns-delegated-admin-schema.conf", "\n",
-		"${oldConfDir}ns-directory-schema.conf", "\n",
-		"${oldConfDir}ns-legacy-schema.conf", "\n",
-		"${oldConfDir}ns-mail-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-browser-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-config-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-li-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-mail-schema.conf", "\n",
-		"${oldConfDir}ns-media-schema.conf", "\n",
-		"${oldConfDir}ns-mlm-schema.conf", "\n",
-		"${oldConfDir}ns-msg-schema.conf", "\n",
-		"${oldConfDir}ns-netshare-schema.conf", "\n",
-		"${oldConfDir}ns-news-schema.conf", "\n",
-		"${oldConfDir}ns-proxy-schema.conf", "\n",
-		"${oldConfDir}ns-value-schema.conf", "\n",
-		"${oldConfDir}ns-wcal-schema.conf", "\n",
-		"${oldConfDir}ns-cos-schema.conf", "\n",
-		"${oldConfDir}ns-web-schema.conf", "\n"
-);
-
-%userDefinedConfigFiles = (
-		"slapd.conf", "\n",
-                "slapd.ldbm.conf", "\n",
-                "slapd.user_at.conf", "\n",
-                "slapd.user_oc.conf", "\n",
-                "ns-schema.conf", "\n"
-		     );
-
-$CIS_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.15" ;
-$TELEPHONE_SYNTAX_OID = "1.3.6.1.4.1.1466.115.121.1.50" ;
-$DN_SYNTAX_OID        = "1.3.6.1.4.1.1466.115.121.1.12" ;
-$CES_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.26" ;
-$INT_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.27" ;
-$BIN_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.5"  ;
-
-%allowedPlugins  = (
-		    "cis", $CIS_SYNTAX_OID,
-		    "tel", $TELEPHONE_SYNTAX_OID,
-		    "dn",  $DN_SYNTAX_OID,
-		    "ces", $CES_SYNTAX_OID,
-		    "int", $INT_SYNTAX_OID,
-		    "bin", $BIN_SYNTAX_OID
-		    );
-
-%allowedModifiers = (
-		    "single", "SINGLE-VALUE"
-		    );
-# "override" is not supported anymore and "operational" cannot be used in user defined attribute.
-
-@oldSuffixes = () ; # array of 4.x suffixes (with "o=netscaperoot" if presents)
-
-# link beetwen the name of the suffix and its associated DBname
-%DBNAMES  = () ; 
-%DBDirectory = () ;
-
-%oldhash  = () ; 
-
-# list of standard plugin's in version 4
-%stdPlugins = (
-	"7-bit check"                         =>        "\n",
-	"binary syntax"                       =>        "\n",     
-	"case exact string syntax"            =>        "\n",
-	"case ignore string syntax"           =>        "\n",
-	"distinguished name syntax"           =>        "\n",
-        "integer syntax"                      =>        "\n",
-        "internationalization plugin"         =>        "\n",
-        "referential integrity postoperation" =>        "\n",
-        "telephone syntax"                    =>        "\n",
-        "uid uniqueness"                      =>        "\n"
-        
-	      );
-
-# list of standard indexes configured out of the box in version 4
-%stdIndex = (
-	'aci',                   "\n",
-	'changenumber',          "\n",
-	'copiedfrom',            "\n",
-	'dncomp',                "\n",
-	'entrydn',               "\n",
-	'numsubordinates',       "\n",  
-	'objectclass',           "\n",
-	'parentid',              "\n"
-);
-
-# list of user added Plugin's. In 5.x, they 'll need to be recompiled
-@badPlugins = () ;
-
-%newIndex = () ;
-
-%User_oc = () ;
-# push objectnames as they are encountered in config files.
-@User_oc_names = () ;
-
-%User_at = () ;
-
-
-
-#Usage parameters
-$USER_OC_FILE_MODIFIED = 0 ; # 0 if user don't want to modify LDIF objectclasses before processing, 1 else
-$USER_AT_FILE_MODIFIED = 0 ;
-$INDEX_FILE_MODIFIED = 0 ;
-
-# Shutdown the legacy Directory instance
-printTrace("\nShutdown the legacy Directory Server instance: ${oldHome}",0);
-&stopServer($oldDir, 'slapd-'.$oldname);
-
-# compare configuration files with the standard ones
-CompareStdConfigFiles() ;
-die "\n\n The version of the product you want to migrate is not a 4.x Netscape Directory Server\n" unless ($oldVersion == 4) ;
-
-FillHashParametersName() ;
-
-###############  Connect to the 5.x LDAP Directory Server  ######################
-$ENV{"$LIB_PATH"} = "$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"} ;
-my $LDAPservername = &getLDAPservername();
-die "\n Migration aborted. Check your 4.x and 5.x Netscape Directory Server are installed on the same machine \n" if ( $LDAPservername == -1 );
-$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Can't contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-
-# continue if the connection to 5.x LDAP server is successful !
-printTrace("\nConnected to $Version.$Minor LDAP server\n",0) ;
-
-# get the uid and gid of the 5.x slapd user
-($localuser, $newuid, $newgid)    = getuid_gid();
-# get the uid and gid of the 4.x slapd user
-($oldlocaluser, $olduid, $oldgid) = getolduid_gid();
-
-# backup 5.x configuration files in <root_server5>/slapd-instancename/config
-printTrace("\nBackup $serverHome${PATHSEP}config on $serverHome${PATHSEP}config_backup ...",0);
-&backupConfigFiles();
-
-# Parse the main configuration file: slapd.conf
-printTrace("\nParse the configuration file: $oldSlapdConf...",0);
-ParseSlapdConf("< ${oldSlapdConf}");
-
-#migrate key/cert databases
-printTrace("\nMigrate key/cert databases...",0);
-&MigrateSSL(); 
-
-# Update parameters : general server parameters, global LDBM parameter, specific backend parameters
-printTrace("\nUpdate general server parameters...",0);
-AddGeneralParameters();
-printTrace("\nUpdate global LDBM parameters...",0);
-AddGeneralLDBMParameters();
-printTrace("\nUpdate specific backend parameters...",0);
-AddSpecificLDBMParameters();
-
-##### FOR TESTING PURPOSE ONLY ########
-#
-#testIndexUpdating();
-#
-#######################################
-
-# Migrate some entries contained in the old dse.ldif, and migrate certmap.conf
-&MigrateDSE() ;
-&MigrateCertmap() ;
-
-# update 5.x attribute definitions
-LDAPmodify_User_at();
-
-# update 5.x object classes definitions
-LDAPmodify_User_oc();
-
-# add new indexes to each backends
-LDAPmodify_Indexes();
-
-# migrate Plug'ins parameters (enable attribute, and arguments)
-LDAPmodify_stdPlugin();
-
-##################   Close the connection to 5.x LDAP Server   #####################
-$conn->close;
-
-
-################## stop the 5.x instance and Export/Import the data, restart the server ##################
-if (%DBNAMES) {
-  &stopServer($root,'slapd-'.$newname);
-  printTrace("\ndata processing...",0) ;
-  # migrate data for each suffix: 4.x -> LDIF files
-  &db2ldif($oldSlapdConf);
-  
-  # migrate LDIF data to the 5.x database: LDIF -> 5.x
-  &manyLdif2db();
-  &startServer();
-}
-else {
-  printTrace("\nThere no 4.x non-standard suffixes to migrate",0);
-}
-
-printMsg("\n\n  ******   End of migration   ******\n\n");
-
-close(LOGFILE);
-
-
-###########################################################################################
-# get input users
-sub getParameters {
-  my $exit = 0 ;
-  my $i    = 0;
-  my $pwdfile= "";
-  while ($i <= $#ARGV) {
-    if ( "$ARGV[$i]" eq "-D" ) { # directory manager
-      if (! $rootDN) {
-	$rootDN = $ARGV[++$i] ;
-      }
-      else {
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-w") { # password
-      if (! $rootpwd) {
-	$rootpwd = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-j") { # password file 
-      if (! $pwdfile) {
-	$pwdfile = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-o") { # 4.x instance path
-       if (! $oldHome ) {
-	 $oldHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $oldHome if $isNT ;
-	 if ($oldHome =~ /[\"]?(.*)?[\"]?/) { $oldHome = $1 ; }
-	 if ($oldHome =~ m@^(.*)/([^-/]*)-([^/]*)[/]?$@) {
-	   $oldDir  = $1 ;
-	   $type    = $2 ;
-	   $oldname = $3 ;
-	   if ($isNT) {
-	     $oldDir  = lc($oldDir)     ;
-	     $type    = lc($type)       ;
-	     $oldname = lc($oldname)    ;
-	     $oldHome = lc($oldHome)    ;
-	     grep { s@/@\\@g } $oldDir  ;
-	     grep { s@/@\\@g } $oldHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe 4.x instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-n") { # 5.x instance path
-       if (! $serverHome ) {
-	 $serverHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $root if $isNT ;
-	 grep { s@\\@/@g } $serverHome if $isNT ;
-	 if ($serverHome =~ /[\"]?(.*)?[\"]?/) { $serverHome = $1 ; }
-	 if ($serverHome =~ m@^(.*?)/?([^/-]*)-([^/]*)[/]?$@) {
-	   $root    = $1 if ($1);
-	   $type    = $2 ;
-	   $newname = $3 ;
-	   if ($isNT) {
-	     $root       = lc($root)       ;
-	     $type       = lc($type)       ;
-	     $newname    = lc($newname)    ;
-	     $serverHome = lc($serverHome) ;
-	     grep { s@/@\\@g } $root       ;
-	     grep { s@/@\\@g } $serverHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe 5.x instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-p") { # 5.x DS port 
-      if (! $newport ) {
-	$newport = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-t") { # TRACELEVEL
-      my $value = $ARGV[++$i] ;	
-      if ($value =~ /[0-3]/) {
-	$TRACELEVEL = $value ;
-      }
-      else {
-	print("\nThe tracelevel must belong to 0..3 interval");
-        &usage();
-	exit();
-      }	
-    } elsif ("$ARGV[$i]" eq "-noinput") { # no user interventions during processing
-	$NO_INPUT_USER = 1 ;
-    } elsif ("$ARGV[$i]" eq "-L") { # migration logfile
-	$LogFileReport = $ARGV[++$i] ;
-    }
-    else {
-	print("\nThe option $ARGV[$i] is not recognized");
-	&usage() ;
-	exit(1);
-    }
-    $i++;
-  }
-  if (! $rootDN) {
-    print("\nThe rootDN is missing");
-    $exit = 1;
-  }
-  if ($pwdfile ne "") {
-    # Open file and get the password
-    unless (open (RPASS, $pwfile)) {
-      die "Error, cannot open password file $passwdfile\n";
-    }
-    $rootpwd = <RPASS>;
-    chomp($rootpwd);
-    close(RPASS);
-  } elsif ($rootpwd eq "-"){
-    # Read the password from terminal
-    die "The '-w -' option requires an extension library (Term::ReadKey) which is not\n",
-    "part of the standard perl distribution. If you want to use it, you must\n",
-    "download and install the module. You can find it at\n",
-    "http://www.perl.com/CPAN/CPAN.html\n";
-    # Remove the previous line and uncomment the following 6 lines once you have installed Term::ReadKey module.
-# use Term::ReadKey; 
-#	print "Bind Password: ";
-#	ReadMode('noecho'); 
-#	$rootpwd = ReadLine(0); 
-#	chomp($rootpwd);
-#	ReadMode('normal');
-  }
-  if (! $rootpwd) {
-    print("\nThe rootpwd is missing");
-    $exit = 1 ;
-  }
-  if (! $newport) {
-    print("\nThe port is missing");
-    $exit = 1;
-  }
-  if (! $serverHome) {
-    print("\nThe 5.x instance path is missing");
-    $exit = 1;
-  }
-  if (! $oldHome) {
-    print("\nThe 4.x instance path is missing");
-    $exit = 1;
-  }
-  if ((! $LogFileReport) && $serverHome) {
-    ($sec, $min, $hour, $dd, $mm, $yy) = &GetTime();
-    $LogFileReport  = "${serverHome}${PATHSEP}logs${PATHSEP}Migration_${dd}${mm}${yy}_${hour}${min}${sec}.log";
-  }
-
-  if ($exit) {	
-	&usage() ;
-	exit(1);
-  }
-  
-}
-
-
-###############################################################################
-# This subroutine is used to parse the slapd.conf configuration file and migrate specific parameters contained in it 
-
-
-sub ParseSlapdConf {
-    my	$oldsrc = shift;
-    my  $NumLine = 0 ;
-	# read the old conf file into a hash table
-    open( OLDSRC, $oldsrc ) || die "Can't open $oldsrc: $!: ";
-	LINE: while ( <OLDSRC> ) {
-	        $NumLine++ ;
-	        printTrace("\nLine: $_",4) ;
-		if (/^\s*\#/) { # skip comments
-		        printTrace("\n# ",4) ;
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-		        printTrace("\nBLANK LINE",4);
-			next LINE;
-		}  elsif (/^suffix\s+/i) {
-		        chomp($_) ;
-			CheckSuffix($_);
-		} elsif (/^plugin/i) {
-		        printTrace("\nPLUGIN",4);
-			chomp($_);
-			if (! &isAStandardPlugin($_)) {
-			   push @badPlugins, $_;
-			 }
-			else {
-			  my $Plugin = $_ ;
-			  if (! &ParsePlugin($_,$NumLine)) {
-			    printMsg("\nLine $NumLine, syntax error of the plugin:\n$Plugin");
-			   }
-			}
-		} elsif (/^include\s+[\"]?(.*?)[\"]?\s*$/i) {
-			# strip leading and trailing "
-			my $include_file = $1 ;
-		        grep { s@/@\\@g } $include_file if $isNT;
-			if (! &isAStandardInclude($include_file)) {
-			   printTrace("\nFILE: $1 NOT STANDARD",4) ;
-			   &ParseConfigurationFile($include_file);
-			   printTrace("\nEXIT ParseConfigurationFile: $include_file",4) ;
-			}
-		} elsif (/^userat\s+[\"]?(.*?)[\"]?\s*$/i) {
-		        printTrace("\nuserat: $1",4);
-			my $at_file = $1 ;
-		        grep { s@/@\\@g } $at_file if $isNT;
-		        # Parse user defined attributes
-		        &ParseAttributesFile($at_file);
-		} elsif (/^useroc\s+[\"]?(.*?)[\"]?\s*$/i) {
-		        printTrace("\nuseroc: $1",4);
-			my $oc_file = $1 ;
-		        grep { s@/@\\@g } $oc_file if $isNT;
-		        # Parse user defined object classes
-		        &ParseObjectClassesFile($oc_file);
-		} elsif (/^dynamicconf\s+[\"]?(.*?)[\"]?\s*$/i){
-		        printTrace("\ndynamicconf: $1",4);
-			my $dynamiconf_file = $1 ;
-		        grep { s@/@\\@g } $dynamiconf_file if $isNT;
-		        # Parse dynamic configuration file (e-g slapd.ldbm.conf)
-		        &ParseConfigurationFile($dynamiconf_file);
-		} elsif (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/) { 
-		        printTrace("\nParseParameters: $1",4);
-		        # Parse parameters and record the associated value in %oldhash
-		        &ParseParameters($1,$2,$NumLine);
-		} else {
-		        printTrace("\nUnknown format of configuration data: $_",0); }
-	}
-	close(OLDSRC);
-
-  }
-
-
-
-#############################################################################
-# return 1 if the suffix already exists, 0 else
-sub existSuffix {
-  my $suffixname = shift ;
-  my $entry = $conn->search("cn=\"$suffixname\",cn=mapping tree,cn=config ", "base","objectclass=*") ;
-  return 1 if ($entry) ;
-  return 0 ;
-}
-
-# return the name of the backend if it has been successfully created, 0 else
-sub createBackend {
-  my $suffixname = shift ;
-  my $backend = "MigratedDB_0" ;
-  my $NbRetry = 1 ;
-  my $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-  while ($entry) {
-    # try to find another name for the backend
-    $backend = "MigratedDB_$NbRetry" ;
-    $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-    $NbRetry++;
-  }
-  # normally I should have a unique name for the backend
-  my $suffixarg = "nsslapd-suffix" ;
-  $entry = $conn->newEntry() ;
-  $entry->setDN("cn=$backend,cn=ldbm database,cn=plugins,cn=config");
-  $entry->setValues("objectclass", "top", "extensibleObject", "nsBackendInstance" );
-  $entry->setValues("cn", $backend );
-  $entry->setValues($suffixarg, $suffixname );
-  my $res = $conn->add($entry) ;
-  if ($res) {
-    return $backend ;
-  }
-  else {
-    return 0 ;
-  }
-}
-
-# return 1, if add the new entry in the mapping tree, else 0
-sub AddEntryInMappingTree {
-  my $backend = shift ;
-  my $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-  if ($entry) {
-    printTrace("\nAddEntry in progress ...",4) ;
-    my $suffixarg =  "nsslapd-suffix" ;
-    my $statearg  =  "nsslapd-state"  ;
-    my $backendarg=  "nsslapd-backend"; 
-    my $suffixname = $entry->{$suffixarg}[0];
-    $entry = $conn->newEntry() ;
-    $entry->setDN("cn=\"$suffixname\",cn=mapping tree,cn=config") ;
-    $entry->setValues("objectclass", "top", "extensibleObject", "nsMappingTree" );
-    $entry->setValues("cn", "\"$suffixname\"");
-    $entry->setValues($statearg, "backend");
-    $entry->setValues($backendarg, $backend);
-    return $conn->add($entry);
-  }
-  else {
-    printTrace("\nNo AddEntry processed for $backend",4);
-    return 0 ;
-  }
-}
-
-
-# Treat the case where the suffix is "o=NetscapeRoot"
-sub CheckSuffix {
-  my $suffix = shift ;
-  my $suffixname ;
-  if (!(/^suffix\s+\"?(.*?)\"?\s*$/i)) {
-    printMsg("Syntax error of the suffix: $suffix");
-    return 0 ;
-  }
-  else {
-    $suffixname = $1 ;
-  }
-  if (/^suffix\s+\"?\s*o=netscaperoot\s*\"?\s*$/i) {
-    printTrace("\nFor the suffix o=NetscapeRoot, we do nothing",1);
-    # treat the case where the suffix is "o=NetscapeRoot"
-  }
-  else {
-    push @oldSuffixes, $_;
-    # check if the suffix already exists in the 5.x DS target
-    if (! existSuffix($suffixname)) {
-      printTrace("\nSuffix $suffixname doesn't exist",1) ;
-      # create a new backend with the name of the suffix preceded by MigratedDB_
-      my $backend = createBackend($suffixname) ;
-      if ($backend) {
-	printTrace("\nBackend: $backend has been created !!!",1);
-	# if the creation of the backend is ok, we add a new entry in the mapping tree
-	if (AddEntryInMappingTree($backend)) {
-	  # We add the association dbname->suffix in the hash %DBNAMES
-	  $DBNAMES{$suffixname} = $backend ;
-	  # get the db filename
-	  $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-	  my $dirarg = "nsslapd-directory";
-	  $DBDirectory{$backend} = $entry->{$dirarg}[0];
-	  printTrace("\nThe relation $backend->$suffixname has been added to the mapping tree",2);
-	}
-	else {
-	  printMsg("\nCOULD NOT ADD ENTRY: $backend->$suffixname IN MAPPINGTREE");
-	}
-      }
-      else {
-	  printMsg("\nCOULD NOT CREATE BACKEND: $backend");
-      }
-    }
-    else {
-      printTrace("\nSuffix: $suffixname already exists",1);
-      # the suffix already exists in the 5.x DS
-    }
-  }
-  return 1 ;
-}
-
-#############################################################################
-# Usefull to know the standard configuration
-sub isAStandardPlugin {
-	my $line = shift;
-	chomp($line);
-	printTrace("\nStdPlugin?: $line",4);
-	if ($line =~ /^plugin\s+(database|extendop|preoperation|postoperation|matchingrule|syntax)\s+(on|off)\s+\"(.*?)\"\s+\"(.*?)\"\s+(\S+)(.*)$/i) {
-	  # $1 = <type>, $2 = <on|off>, $3 = <name>, $4 = <pathname>, $5 = <init_function>, $6 = [<arg>]*
-	  printTrace("\nName: $3, pathname: $4, init_function: $5",4);
-	  
-	  my $LC_line = lc($3);
-	  my $Value = $stdPlugins{$LC_line} ;
-	  if ($Value) {
-	     printTrace("\nIS A STANDARD PLUGIN",4);
-	  }
-	  else {
-	     printTrace("\nNOT A STANDARD PLUGIN",4);
-	  }
-	  return $stdPlugins{$LC_line} ;
-	}
-	else {
-	  printTrace("\nSYNTAX ERROR PLUGIN",4);
-	  return 0 ;
-	}
-}
-
-sub isAStandardIndex {
-	my $line = shift ;
-	chomp($line);
-	if ($line =~ /^index\s+(\S+).*/i) {
-	  my $LC_line = lc($1);
-	  my $Value = $stdIndex{$LC_line} ;
-	  printTrace("\nInclude: $LC_line \nValue: $Value", 4);
-	  return $stdIndex{$LC_line};
-	}
-	else {
-	  return 0 ;
-	}
-}
-
-
-sub isAStandardInclude {
-	my $line = shift;
-
-	chomp($line);
-	if ($isNT){
-	  return $stdIncludes{lc($line)}; 
-	}
-	else {
-   	  return $stdIncludes{$line} ;
-	}
-}
-
-#############################################################################
-# 
-# Execute a Perldap command to update plugins definition in the 5.x schema 
-
-sub LDAPmodify_stdPlugin {
-  my $Filename = shift ;
-  my @pluginames = keys(%stdPlugins);
-  if (! $STDPLUGINS_FILE_MODIFIED) {
-    printTrace("\nLDAPmodify_plugin",4);
-    printTrace("\nMigrate plugin's...",1);
-    foreach $pluginame ( @pluginames ) {
-      my $update_plugin = 0 ;
-      my $ref_plugin = $stdPlugins{$pluginame};
-      if ($ref_plugin ne "\n") {
-	my $name       = $ref_plugin->name    ;
-	my $entry = $conn->search("cn=$name,cn=plugins,cn=config", "base","objectclass=nsSlapdPlugin") ;
-	if ($entry) {
-	  my $pluginenabled="nsslapd-pluginenabled" ;
-	  if (($entry->{$pluginenabled}[0]) ne $ref_plugin->enable) {
-	    $update_plugin = 1 ; 
-	    my $enable =  $ref_plugin->enable ;
-	    printTrace("\n$pluginame, plugin-enable: $enable",3) ;
-	    $entry->setValues($pluginenabled, $enable );
-	  }
-	  my $ArgNum = 0 ;
-	  foreach $ArgValue (@{$ref_plugin->args}) {
-	    my $Arg="nsslapd-pluginarg$ArgNum";
-	    printTrace("\n$Arg: $ArgValue",3) ;
-	    if ($entry->{$Arg}[0] ne $ArgValue) {
-	      printTrace("\n$pluginame, $Arg: $ArgValue",3) ;
-	      $update_plugin = 1 ; 
-	      $entry->setValues($Arg, $ArgValue) ;
-	    }
-	    $ArgNum++ ;
-	  }
-	  if ($update_plugin) {
-	    printTrace("\n$pluginame is being updated...",2);
-	    my $res = $conn->update($entry) ;
-	    if ($res) {
-	      printTrace("\nupdated !",2);
-	    }
-	    else {
-	      printMsg("\nError during update of plugin: $pluginame") ;
-	      $MigrationErrors .= "\nError during update of plugin: $pluginame";
-	    }
-	  }
-	  else {
-	    printTrace("\n$pluginame has not changed",4);
-	  }
-	}
-	else {
-	    printMsg("\ncan't access the plugin: cn=$name,cn=plugins,cn=config");
-	}
-      }
-      else {
-	printTrace("\nPLUGIN NOT RECORDED: $pluginame",4) ;
-      }
-     }
-    }
-    else {
-    # treat the case where the user wants to look at these plugins before processing
-  }
-}
-
-#############################################################################
-# Execute Perldap command to add new indexes to the migrated instances
-
-sub LDAPmodify_Indexes {   
-  my $Filename = shift ;
-  my @indexnames = keys(%newIndex);
-  my @suffixnames = keys(%DBNAMES);
-  if ((! $INDEX_FILE_MODIFIED) && (%DBNAMES)) {
-    # we update indexes only if there is at least one backend to migrate
-    printTrace("\nLDAPmodify_indexes",4);
-    printTrace("\nMigrate indexes...",1);
-    foreach $indexname ( @indexnames ) {
-      printTrace("\nIndexName: $indexname",4);
-      printTrace("\nIndexTypes: .@{$newIndex{$indexname}->types}.", 4) ;
-      printTrace("\nIndexOIDS: .@{$newIndex{$indexname}->oids}.", 4) ;
-      foreach $suffixname ( @suffixnames ) {
-	# check if the index already exists !
-	printTrace("\nsearch for cn=$indexname,cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config...", 3);
-	my $entry = $conn->search("cn=$indexname,cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config","base","objectclass=nsIndex");
-	if (! $entry) {
-	  # create a new index
-	  printTrace("index $indexname is being created under cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config...",2);
-	  my $entry = $conn->newEntry();
-	  $entry->setDN("cn=$indexname,cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config");
-	  $entry->setValues("objectclass",  "top", "nsIndex" ) ;
-	  $entry->setValues("cn", $indexname) ;
-	  $entry->setValues("nssystemindex", "false") ;
-          my @types = @{$newIndex{$indexname}->types} ;
-	  my @oids  = @{$newIndex{$indexname}->oids}  ;
-	  $entry->setValues("nsindextype", @types) if (@types) ; 
-	  $entry->setValues("nsmatchingrule", @oids ) if (@oids);
-	  my $res = $conn->add($entry) ;
-	  if ($res) {
-	    printTrace("\nAdd index successfully: $indexname for backend: $DBNAMES{$suffixname}",2);
-	  }
-	  else {
-	    printMsg("\n Failed to add the index: $indexname to backend: $DBNAMES{$suffixname}");
-	    $MigrationErrors .= "\n Failed to add the index: $indexname to backend: $DBNAMES{$suffixname}" ;
-	  }
-	}
-	elsif ($entry->{nssystemindex}[0] eq "false") {
-	  # if the index is not a system index, we update it
-	  printTrace("\nindex $indexname is being processed under cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config...",2);
-          my @types          = @{$newIndex{$indexname}->types} ; printTrace("\ntypes: .@types.",2) ;
-	  my @oids           = @{$newIndex{$indexname}->oids}  ; printTrace("\noids: .@oids.",2) ;
-	  my @existing_types = $entry->getValues("nsindextype");
-	  my @existing_oids  = $entry->getValues("nsmatchingrule");
-	  # get the elements present in @types and not present in @existing_types
-	  my @typesToAdd     = &getDiff(\@types, \@existing_types);
-	  # same for matchingrules
-	  my @oidsToAdd      = &getDiff(\@oids, \@existing_oids);
-	  foreach $newtype (@typesToAdd) {
-	      $entry->addValue("nsindextype", $newtype); printTrace("\nnewtype: $newtype",2); 
-	  }
-	  foreach $newoid (@oidsToAdd) {
-	      $entry->addValue("nsmatchingrule", $newoid);  
-	  }
-	  if (@typesToAdd ||  @oidsToAdd) {
-	      my $res = $conn->update($entry) ;
-	      if ($res) {
-		  printTrace("\nUpdate index successfully: $indexname for backend: $DBNAMES{$suffixname}",2);
-	      }
-	      else {
-		  printMsg("\n Failed to update the index: $indexname to backend: $DBNAMES{$suffixname}");
-		  $MigrationErrors .= "\n Failed to update the index: $indexname to backend: $DBNAMES{$suffixname}" ;
-	      }
-	  }
-	  else {
-	      printTrace("\nNothing to update",2);
-	  }
-	}
-	else {
-	  printTrace("\nThe index: $indexname is a system index. It can't be updated",2);
-	}
-      }
-    }
-    
-  }
-  else {
-    # treat the case where the user wants to look at these indexes before processing
-  }
-        
-}
-
-#############################################################################
-# 
-# Execute a Perldap command to add all user defined object classes in the 5.x schema 
-
-sub LDAPmodify_User_oc {
-  my $Filename = shift ;
-  if (! $USER_OC_FILE_MODIFIED) {
-    printTrace("\nLDAPmodify_User_oc",4);
-    printTrace("\nMigrate objectclasses...",1);
-    foreach $objectname ( @User_oc_names ) {
-      my $entry = $conn->search("cn=schema", "base","objectclass=*") ;
-      die "\ncan't connect to object: cn=schema\n" unless ($entry);
-      printTrace("\nObjectName: $objectname\nValue: $User_oc{$objectname}",3);
-      next if ($entry->hasValue("objectclasses",$User_oc{$objectname},1)) ;
-      $entry->addValue("objectclasses",$User_oc{$objectname},"1") ;
-      my $res = $conn->update($entry) ;
-      if (! $res) { 
-	printMsg("\nCan\'t add objectclass to the schema: $User_oc{$objectname}");
-	my $msg = $conn->getErrorString();
-	printMsg("\nMsg: $msg");
-	$MigrationErrors .= "\nCan\'t add objectclass to the schema: $User_oc{$objectname}" ;
-      }
-      else {
-	printTrace("\nobjectclass: $User_oc{$objectname} added",2);
-      }
-    }
-  }
-  else {
-    # treat the case where the user wants to look at these objectclasses before processing
-  }
-}
-
-#############################################################################
-# 
-# Execute a Perldap command to add all user defined attributes in the 5.x schema 
-
-sub LDAPmodify_User_at {
-  my $Filename = shift ;
-  my @attributenames = keys(%User_at);
-  if (! $USER_AT_FILE_MODIFIED) {
-    
-    printTrace("\nLDAPmodify_User_at",4);
-    printTrace("\nMigrate attributes...",1);
-    foreach $attributename ( @attributenames ) {
-      my $entry = $conn->search("cn=schema", "base","objectclass=*") ;
-      printTrace("\nAtributeName: $attributename, Value: $User_at{$attributename}",3);
-	die "\nentry not found cn=schema\n" unless $entry ;
-      next if ($entry->hasValue("attributetypes",$User_at{$attributename},1) ) ;	
-      my $res = $entry->addValue("attributetypes",$User_at{$attributename},"1") ;
-      if (! $res) { 
-	printMsg("\nCan\'t add attribute to the schema: $User_at{$attributename}");
-	$MigrationErrors .= "\nCan\'t add attribute to the schema: $User_at{$attributename}" ;
-      }
-      my $res = $conn->update($entry) ;
-      if ($res) {
-	printTrace("\nattribute: $attributename added",2);
-      }
-      else {
-	printMsg("\nCan\'t add attribute to the schema: $User_at{$attributename}");
-	my $msg = $conn->getErrorString();
-	printMsg("\nMsg: $msg");
-	$MigrationErrors .= "\nCan\'t add attribute to the schema: $User_at{$attributename}" ;
-      }
-    }
-  }
-  else {
-    # treat the case where the user wants to look at these attributes before processing
-  }
-}
-
-#############################################################################
-# Add an object class to the user_oc hash and reset the object !!!
-sub AddObjectClass {
-  my $ObjectClass     = shift ;
-  my $ObjectName      = $ObjectClass->{'ObjectName'} ;
-  my $Object_oid      = $ObjectClass->{'Object_oid'} ;
-  my $Object_superior = $ObjectClass->{'Object_superior'} ;
-  my $Object_requires = $ObjectClass->{'Object_requires'} ;
-  my $Object_allows   = $ObjectClass->{'Object_allows'} ;  
-  my $ObjectClassDef  = "( $Object_oid NAME \'$ObjectName\' DESC \'\' SUP $Object_superior STRUCTURAL MUST ($Object_requires) MAY ($Object_allows) X-ORIGIN \'user defined\' )";
-  if ( (!($ObjectName =~ /^top$/i)) && ( ! $User_oc{$ObjectName} )) {
-      $User_oc{$ObjectName} = $ObjectClassDef ;
-      push @User_oc_names, $ObjectName ;
-      printTrace("ObjectName: $ObjectName \nObject_oid: $Object_oid \nObject_superior:$Object_superior \nObject_requires: $Object_requires \nObject_allows: $Object_allows \nObjectClassDefinition: $User_oc{$ObjectName}\n",4);
-  }
-  elsif ( ($User_oc{$ObjectName}) && ($User_oc{$ObjectName} ne $ObjectClassDef) ) {
-      printMsg("\nAttempt to redifine the objectclass: $ObjectName previously defined in your configuration file. Operation not allowed  ");
-  }
-  else {
-      printMsg("\nAttempt to redifine the objectclass: top. Operation not allowed");
-  }
-  resetObjectClass($ObjectClass);
-}
-
-#############################################################################
-# Build an LDIF attribute and add it to the user_at hash
-sub AddAttribute {
-  my $Attr                  = shift ;
-  my $AttributeName         = $Attr->{'AttributeName'};
-  my $Attribute_oid         = $Attr->{'Attribute_oid'};
-  my $Attribute_aliases     = $Attr->{'Attribute_aliases'};
-  my $Attribute_syntax      = $Attr->{'Attribute_syntax'};
-  my $Attribute_single      = $Attr->{'Attribute_single'};
-  my $AttributeDef          = "( $Attribute_oid NAME ( \'$AttributeName\' $Attribute_aliases) DESC \'User Defined Attribute\' SYNTAX $Attribute_syntax $Attribute_single X-ORIGIN 'user defined' )" ;
-  printTrace("\nAttributeDef: $AttributeDef",4);
-  $User_at{$AttributeName} = $AttributeDef ;
-}
-#############################################################################
-# add the index structure to the newIndex hash
-sub AddIndex {
-  my $ref_index = shift ;
-  my $state     = shift ;
-  printTrace("\nAddIndex, last state: $state",4) ;
-  if ($state == 1) {
-    $ref_index->specific("ALL") ;
-    return 1 ;
-  }
-  elsif ($state == 6) {
-    $ref_index->specific("NONE") ;
-    return 1 ;
-  }
-  if (($state == 1) || ($state == 3) || ($state == 5) || ($state == 6)) {
-    foreach $name (@{$ref_index->names}) {
-      $newIndex{$name} = $ref_index ; # record the ref to the index struct in the newIndex hash
-    }
-    return 1 ;
-  }
-  else {
-    return 0 ; 
-  }
-}
-
-#############################################################################
-# add the plugin structure to the stdPlugin hash
-
-sub AddPlugin {
-  my $ref_plugin = shift ;
-  printTrace("\nAddPlugin",4) ;
-  $stdPlugins{lc($ref_plugin->name)} = $ref_plugin ;
-  my $name   = $ref_plugin->name    ;
-  my $type   = $ref_plugin->type    ;
-  my $enable = $ref_plugin->enable  ;
-
-  printTrace("\nPluginName: $name",4);
-  printTrace("\nPluginType: $type",4);
-  printTrace("\nPluginEnable: $enable",4);
-  printTrace("\nPluginArgs: @{$ref_plugin->args}",4);
-  return 1 ;
-}
-
-
-#############################################################################
-# parse a plugin definition and call the addindex
-
-sub ParsePlugin {
-  my $Plugin   = shift ;
-  my $NumLine  = shift ;
-  my $state = 0 ;
-  my $ErrorMsg = "Syntax error of a plugin definition. \n line parsed:";
-  my $ref_plugin = S_plugin->new();
-  printTrace("\nParsePlugin: $_",4);
-  if (/^plugin\s+(database|extendop|preoperation|postoperation|matchingrule|syntax)\s+(on|off)\s+\"(.*?)\"\s+\"(.*?)\"\s+(\S+)(.*)$/i) {
-    # $1 = <type>, $2 = <on|off>, $3 = <name>, $4 = <pathname>, $5 = <init_function>, $6 = [<arg>]*
-    $ref_plugin->name($3);
-    $ref_plugin->type($1);
-    $ref_plugin->enable($2);
-    $_ = $6 ;
-    my $ArgNb = 0 ;
-    my $prec ;
-    my $arg ;
-    my $Unix_oldDir = $oldDir ;
-    my $Unix_root   = $root ;
-    grep { s@\\@/@g } $Unix_oldDir if $isNT;
-    grep { s@\\@/@g } $Unix_root   if $isNT;
-    while (!(/^\s*$/)) {
-      if (/^\s*\".*?\"/) {
-        s/^\s*\"(.*?)\"(.*)/$2/i ;
-        $arg = $1 ;
-      }
-      elsif (/^\s*[^\"\s]+/) {
-        s/^\s*([^\"\s]+)(.*)/$2/i ;
-        $arg = $1 ;
-      }
-      $prec = $_ ;
-      $_ = $arg ;
-      
-      s@$Unix_oldDir@$Unix_root@ig ;
-      s/$type-$oldname/$type-$newname/ig ;
-      @{$ref_plugin->args}[$ArgNb++] = $_ ;
-      $_ = $prec ;
-    }
-    if (/^\s*$/) {
-      return AddPlugin($ref_plugin);
-    }
-    else {
-      return 0 ;
-    }
-  }
-  return 0 ;
-}
-
-#############################################################################
-# parse an index definition and call the addindex
-
-sub ParseIndex {		  
-  my $index   = shift ;
-  my $NumLine = shift ;
-  my $ref_index = S_index->new() ;
-  my $Value ;
-  my $state = 0 ;
-  my $ErrorMsg  = "Syntax error of an index definition.\nline parsed:";
-  printTrace("\nParseIndex: $_",4) ;
-  s/,/, /g ;
-  s/\s+,/,/g ;
-  s/^index\s+//i ; # substitute the token index
-  while (!(/^\s*$/)) {
-    s/^\s*(\S+)(.*)$/$2/ ;
-    $Value = $1 ;
-    printTrace("\nValue: $Value",4);
-    printTrace("\nState: $state",4) ;
-    SWITCH: {
-	if ($state == 0) {
-	  if ($Value =~ /[^\.]/) {
-	    if ($Value =~ /(\S+),$/) {
-	      push @{$ref_index->names}, $1 ;
-	    }
-	    else { 
-	      $state = 1 ;
-	      push @{$ref_index->names}, $Value ;
-	    }
-	  }
-	  else { 
-	    return 0 ;
-	  }
-	  last SWITCH ;
-	}
-	if ($state == 1) {
-	  if ($Value =~ /^none$/i) {
-	    $state = 6 ; # end of the index definition
-	  }
-	  elsif ($Value =~ /^\"\"$/) {
-	    $state = 4 ; # we expect to have at least one OID
-	  }
-	  elsif ($Value =~ /(\S+),$/) {
-	      $state = 2 ;
-	      push @{$ref_index->types}, $1 ;
-	    }
-	  else { 
-	      $state = 3 ;
-	      push @{$ref_index->types}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-	if ($state == 2) {
-	   if ($Value =~ /(\S+),$/) {
-	      push @{$ref_index->types}, $1 ;
-	    }
-	    else { 
-	      $state = 3 ;
-	      push @{$ref_index->types}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-	if ($state == 3) {
-	   if ($Value =~ /(\S+),$/) {
-	      $state = 4 ;
-	      push @{$ref_index->oids}, $1 ;
-	    }
-	    else { 
-	      $state = 5 ;
-	      push @{$ref_index->oids}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-	if ($state == 4) {
-	   if ($Value =~ /(\S+),$/) {
-	      push @{$ref_index->oids}, $1 ;
-	    }
-	    else { 
-	      $state = 5 ;
-	      push @{$ref_index->oids}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-      }
-  }
-return AddIndex($ref_index,$state) ;
-  
-}
-
-#############################################################################
-
-sub ParseAttribute {
-
-
-        my $Attr      = shift ;
-	my $NumLine   = shift ;
-	my $state     = 1 ;
-	my $ErrorMsg  = "Syntax error of an attribute definition.\nline parsed:";
-	my %Attribute = (
-		       'AttributeName'         => "",
-		       'Attribute_oid'         => "",
-		       'Attribute_aliases'     => "",
-		       'Attribute_syntax'      => "",
-		       'Attribute_single'      => ""
-		      );
-	my $AttributeName = " ";
-	printTrace("\nParseAttribute",4);
-	while (!(/^\s*$/)) {
-	  s/^(.*?)(\S+)\s*$/$1/ ;
-	  printTrace("\nValue: $2",4);
-	  printTrace("\nState: $state",4) ;
-	  my $Value = $2 ;
-	  SWITCH: {
-	      if ($state == 1) { 
-		  if (isAllowedModifier($Value)) {
-		      $state               = 1 ;
-		      $modifier            = lc($Value);
-		      $AttrVar             = 'Attribute_' . $modifier ;
-		      $Attribute{$AttrVar} = &getModifierValue($Value) ;
-		  }
-		  elsif (&isAllowedPlugin($Value)) {
-		      $state                         = 2 ;
-		      $Attribute{'Attribute_syntax'} = &getSyntaxOid($Value) ;
-		  }
-		  else {
-		      return 0 ;
-		  }
-		  last SWITCH ;
-	      }
-	      if ($state == 2) {
-		if ($Value =~ /[\.]|-oid$/)  {
-		  $Attribute{'Attribute_oid'} = "$Value" ;
-		  printTrace("\nAttribute-oid: $Attribute{'Attribute_oid'}",3);
-		  $state = 3 ;
-		}
-		elsif ($Value =~ /[^\.]/) {
-		  $AttributeName = $Attribute{'AttributeName'} ;
-		  if ($AttributeName) { $Attribute{'Attribute_aliases'} .= "\'$AttributeName\' " ;}
-		  $Attribute{'AttributeName'} = $Value ;
-		  $state = 4 ;
-		}
-		else {
-		  return 0 ;
-		}
-		last SWITCH ;
-	      }
-	      if ($state == 3) {
-		if ($Value =~ /[^\.]/) {
-		  $AttributeName = $Attribute{'AttributeName'} ;
-		  if ($AttributeName) { $Attribute{'Attribute_aliases'} .= "\'$AttributeName\' " ;}
-		  $Attribute{'AttributeName'} = $Value ;
-		  $state = 4 ; }
-		else {
-		  return 0 ;
-		}
-		last SWITCH ;
-		  }
-	      if ($state == 4) {
-		if ($Value =~/^attribute$/i){
-		  $state = 5;
-		}
-		elsif ($Value =~/[^\.]/i) {
-		  $AttributeName = $Attribute{'AttributeName'} ;
-		  if ($AttributeName) {  $Attribute{'Attribute_aliases'} .= "\'$AttributeName\' " ;}
-		  $Attribute{'AttributeName'} = $Value ;
-		}
-		else {
-		  return 0 ;
-		}
-		last SWITCH ;
-	      }
-	      if ($state == 5) {
-		return 0 ;
-		last SWITCH ;
-	      }
-	    } 
-	}
-	$Attribute{'Attribute_oid'} = $Attribute{'AttributeName'} . '-oid' unless ($Attribute{'Attribute_oid'}) ;
-	return AddAttribute(\%Attribute) ;
-}
-
-
-#############################################################################
-# fill in the hash HashParametersName
-
-sub FillHashParametersName {
-  my @paramnames = ( keys(%GeneralSrvParamToMigrate), keys(%GlobalConfigLDBMparamToMigrate), keys(%LDBMparamToMigrate));
-  foreach $param (@paramnames) {
-    $HashParametersName{$param} = '\n';
-  }
-}
-
-
-# Parse parameters
-sub ParseParameters {
-  my $param    = shift ;
-  my $value    = shift ;
-  my $NumLine  = shift ;
-  my $ErrorMsg = "parameter unknown, or not to be migrated: ";
-  if ($HashParametersName{lc($param)} && ($value !~ /^\s*$/)) {
-    $HashParametersName{lc($param)} = $value ;
-    printTrace("\nParam: $param is present",4);
-  }
-  else { 
-    printTrace("\n$NumLine, $ErrorMsg,$param",4); 
-  }
-  
-}
-
-# add general server parameters 
-sub AddGeneralParameters {
-  my @paramnames = keys(%GeneralSrvParamToMigrate);
-  my $entry      = $conn->search("cn=config","base","objectclass=*");
-  die "\ncan't access to object: cn=config. \nMigration stopped\n" unless ($entry);
-  printTrace("\nAddGeneralParameters",4);
-  foreach $param (@paramnames) {
-      my $LDAPparam =  $GeneralSrvParamToMigrate{$param} ;
-      my $Value     = $HashParametersName{$param} ;
-      if (($Value ne '\n') && ($entry->{$LDAPparam}[0] ne $Value)) { 
-	  printTrace("\nLDAPparam: $LDAPparam, Value: $Value",4);
-	  $entry->setValues($LDAPparam, $Value);
-	  my $res = $conn->update($entry);
-	  if ($res) {
-	      printTrace("\nUpdate successfully $LDAPparam ",0);
-	  }
-	  else {
-	      printMsg("\nCan't update parameter: $LDAPparam");
-	  }
-      }
-  }
-}
-
-
-# add general LDBM parameters
-sub AddGeneralLDBMParameters {
-  my @paramnames = keys(%GlobalConfigLDBMparamToMigrate);
-  my $entry      = $conn->search("cn=config,cn=ldbm database,cn=plugins,cn=config","base","objectclass=*");
-  die "\ncan't access to object: cn=config,cn=ldbm database,cn=plugins,cn=config. \nMigration stopped\n" unless ($entry);
-  printTrace("\nAddGeneralLDBMParameters",4);
-  foreach $param (@paramnames) {
-    my $LDAPparam = $GlobalConfigLDBMparamToMigrate{$param} ;
-    my $Value     = $HashParametersName{$param} ;
-    if (($Value ne '\n') && ($entry->{$LDAPparam}[0] ne $Value)) { 
-      printTrace("\nLDAPparam: $LDAPparam, Value: $Value",4);
-      $entry->setValues($LDAPparam, $Value);
-      my $res = $conn->update($entry);
-      if ($res) {
-	  printTrace("\nUpdate successfully $LDAPparam ",0);
-      }
-      else {
-	  printMsg("\nCan't update parameter: $LDAPparam");
-      }
-    }
-  }
-}
-
-# add specific LDBM parameters
-sub AddSpecificLDBMParameters {
-  my @paramnames = keys(%LDBMparamToMigrate);
-  my %REV_DBNAMES = reverse %DBNAMES ;
-  my @dbnames = keys(%REV_DBNAMES);
-  printTrace("\nAddSpecificLDBMParameters",4);
-  foreach $dbname (@dbnames) {
-    my $entry = $conn->search("cn=$dbname,cn=ldbm database,cn=plugins,cn=config","base","objectclass=*");
-    die "\ncan't access to object: cn=$dbname,cn=ldbm database,cn=plugins,cn=config. \nMigration stopped\n" unless ($entry);
-    foreach $param (@paramnames) {
-      my $LDAPparam = $LDBMparamToMigrate{$param} ;
-      my $Value     = $HashParametersName{$param} ;
-      if (($Value ne '\n') && ($entry->{$LDAPparam}[0] ne $Value)) { 
-	printTrace("\nLDAPparam: $LDAPparam, Value: $Value",4);
-        $entry->setValues($LDAPparam, $Value);
-	my $res = $conn->update($entry);
-	if ($res) {
-	    printTrace("\nUpdate successfully $LDAPparam",2);
-	}
-	else {
-	    printMsg("\nCan't update parameter: $LDAPparam");
-	}
-      }
-    }
-  }
-}
-
-#############################################################################
-# Parse a configuration file potentialy tuned by the user (different from slapd.user_oc.conf and slapd.user_at.conf)
-
-sub ParseConfigurationFile {
-
-      my $FileToParse = shift;
-      my $NumLine = 0;
-      my $PARSE_OBJECTCLASSES = 0 ; # 1 if there are objectclass definitions in the file 
-      printTrace("\nParseConfigurationFile: $FileToParse",4) ;
-      printTrace("\nParse $FileToParse",2);
-      # read each line of the configuration file
-      my $CONFIGFILE = "CONFIGFILE.$FileToParse" ;
-      open( $CONFIGFILE, $FileToParse ) || die "Can't open $FileToParsec: $!: ";
-	LINE: while ( <$CONFIGFILE> ) {
-	        $NumLine++ ;
-		if (/^\s*\#/) { # skip comments
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-			next LINE;
-		} elsif (/^suffix\s+/i) {
-		        chomp($_) ;
-			CheckSuffix($_) ;
-		} elsif (/^plugin/i) {
-			chomp($_);
-			if (! &isAStandardPlugin($_)) {
-			   push @badPlugins, $_; 
-			}
-			else {
-			  my $Plugin = $_ ;
-			  if (! &ParsePlugin($_,$NumLine)) {
-			    printMsg("\nLine $NumLine, syntax error of the plugin:\n$Plugin");
-			   }
-			}
-		} elsif (/^index/i) {
-			chomp($_);
-			if (! &isAStandardIndex($_)) {
-			  my $Index = $_ ;
-			  if (! &ParseIndex($_,$NumLine)) {
-			    printMsg("\nLine $NumLine, syntax error of index:\n$Index");
-			  }
-			}
-		} elsif (/^include\s+[\"]?(.*?)[\"]?\s*$/i) {
-			# strip leading and trailing "
-			my $include_file = $1 ;
-		        grep { s@/@\\@g } $include_file if $isNT;
-			if (! &isAStandardInclude($include_file)) {
-			   &ParseConfigurationFile($include_file);
-			}	
-		} elsif (/^attribute\s+\S+/i) {
-		        chomp($_);
-			my $Attrib = $_ ;
-			if (! &ParseAttribute($_,$NumLine)) {
-			  printMsg("\nLine $NumLine, syntax error of attribute:\n$Attrib");
-			}
-		} elsif (/^objectclass\s+(\S+)\s*$/i) {
-		        # At least one objectclass is present in the file
-		        $PARSE_OBJECTCLASSES = 1;
-		} elsif (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/) { 
-		        # Parse parameters and record the associated value in %Oldhash
-		        &ParseParameters($1,$2,$NumLine);
-		}
-	}
-	close($CONFIGFILE);
-        ParseObjectClassesFile($FileToParse) if ($PARSE_OBJECTCLASSES); # parse objectclass definition
-
-}
-
-#############################################################################
-# Parse the file specified in the userat attribute
-
-sub ParseAttributesFile {
-    my $userat_file=shift ;
-    my $NumLine = 0;
-    printTrace("\nParseAttributesFile: $userat_file",4);
-    printTrace("\nParse user defined attributes file: $userat_file",2);
-    # read each line of the configuration file
-    open( ATTRFILE, $userat_file ) || die "Can't open $FileToParsec: $!: ";
-	LINE: while ( <ATTRFILE> ) {
-	        $NumLine++ ;
-		if (/^\s*\#/) { # skip comments
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-			next LINE;
-		} elsif (/^attribute\s+\S+/i) {
-			chomp($_);
-			my $Attrib = $_ ;
-			if (! &ParseAttribute($_, $NumLine)) {
-			  printMsg("\nLine $NumLine, syntax error of attribute:\n$Attrib");
-			}
-		}
-	}
-	close(ATTRFILE);
-}
-
-#############################################################################
-# Parse the file specified in the useroc token
-
-sub ParseObjectClassesFile {
-    my $useroc_file = shift ;
-    my %ObjectClass = (
-		       'ObjectName'      => " ",
-		       'Object_oid'      => " ",
-		       'Object_superior' => "top",
-		       'Object_requires' => " ",
-		       'Object_allows'   => " "
-		      );
-
-    my $state    = 0;
-    my $ErrorMsg = "Syntax error of an object class definition.\nline parsed:";
-    my $LineNb   = 0 ; # Number of the current line parsed in the file
-    printTrace("ParseObjectClassesFile: $useroc_file\n",4) ;
-    # read each line of the configuration file
-    open( OBJCLASSFILE, $useroc_file ) || die "Can't open $FileToParsec: $!: ";
-    printTrace("Begin the parsing of the file: $useroc_file",4);
-	LINE: while ( <OBJCLASSFILE> ) {
-	        printTrace("Current Line: $_",4);
-	        $LineNb++ ;
-		if (/^\s*\#/) { # skip comments
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-			next LINE;
-		}
-	      SWITCH: {
-		  if ($state == 0) {  resetObjectClass(\%ObjectClass);
-		                      if (/^objectclass\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'ObjectName'} = $1;
-				      $state = 1 ;}
-				    else {} # printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		  if ($state == 1) {if (/^\s+oid\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'Object_oid'} = $1;
-				      $state = 2 ;}
-				    elsif (/^\s+superior\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'Object_superior'} = $1;
-				      $state = 3 ;
-				    }
-				    elsif (/^\s+requires\s*$/i) {
-				      $state = 4;
-				    }
-				    elsif (/^\s+allows\s*$/i) {
-				      $state = 5;
-				    }
-				    else {$state=0; printMsg($ErrorMsg,$_,$LineNb);}
-		                    last SWITCH;}
-		  if ($state == 2) {if (/^\s+superior\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'Object_superior'} = $1;
-				      $state = 3 ;}
-				    elsif (/^\s+requires\s*$/i) {
-				      $state = 4;
-				    }
-				    elsif (/^\s+allows\s*$/i) {
-				      $state = 5;
-				    }
-				    else { $state=0; printMsg($ErrorMsg,$_,$LineNb);}
-		                    last SWITCH;}
-		  if ($state == 3) {if (/^\s+requires\s*$/i)
-					{ $state = 4; }
-				    elsif (/^objectclass\s+(\S+)\s*$/i) {
-				      # run an ldap add before to continue
-				      &AddObjectClass(\%ObjectClass);
-				      $ObjectClass{'ObjectName'} = $1;
-				      $state = 1 ;}
-				    elsif (/^\s+allows\s*$/i)
-					{ $state = 5; }
-				    else {$state = 0; printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		  if ($state == 4) {if (/^\s+([^,\s]+),\s*$/i) {
-		                        $ObjectClass{'Object_requires'}.=$1." \$ "; }
-				    elsif (/^\s+([^,\s]+)\s*$/i) {
-                                        $ObjectClass{'Object_requires'}.=$1." ";
-				        $state = 6; }
-				    else {$state = 0;printMsg($ErrorMsg,$_,$LineNb);}
-		                    last SWITCH;}
-		  if ($state == 5) {if (/^\s+([^,\s]+),\s*$/i) {
-		                        $ObjectClass{'Object_allows'}.=$1." \$ "; }
-				    elsif (/^\s+([^,\s]+)\s*$/i) {
-                                        $ObjectClass{'Object_allows'}.=$1." ";
-					# run an ldap add before to continue
-				        &AddObjectClass(\%ObjectClass);
-				        $state = 0; }
-				    else {$state = 0; printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		  if ($state == 6) {if (/^objectclass\s+(\S+)\s*$/i) {
-				      # run an ldap add before to continue
-				      &AddObjectClass(\%ObjectClass);
-				      $ObjectClass{'ObjectName'} = $1;
-				      $state = 1 ;}
-				    elsif (/^\s+allows\s*$/i) {
-				      $state = 5;}
-				    else {$state = 0; printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		}
-	}
-	close(OBJCLASSFILE);
-    if (($state == 3) || ($state == 4) || ($state == 5) || ($state == 6)) {
-      &AddObjectClass(\%ObjectClass);
-    }
-    printTrace("state: $state",4);
-}
-
-#############################################################################
-# printMsg print message to the user standard output.  
-
-sub printMsg {
-
-  my $TypeMsg = shift ;
-  my $Msg     = shift ;
-  my $LineNb  = shift ;
-  if ($LineNb) {
-    printTrace("Line: $LineNb, $TypeMsg, $Msg");
-  }
-  else {
-    printTrace("$TypeMsg $Msg");
-  }
-}
-
-#############################################################################
-#  print message error to the user standard output.  
-
-sub printTrace {
-
-  my $Msg     = shift ;
-  my $level   = shift ;
-  if ($level <= $TRACELEVEL) {
-    print($Msg);    
-    print LOGFILE $Msg ;
-  }
-}  
-
-#############################################################################
-# reset an objectclass structure
-
-sub resetObjectClass {
-  my $ObjectClass = shift;
-  $ObjectClass->{'ObjectName'}      = " " ;
-  $ObjectClass->{'Object_oid'}      = " " ;
-  $ObjectClass->{'Object_superior'} = "top" ;
-  $ObjectClass->{'Object_requires'} = " " ;
-  $ObjectClass->{'Object_allows'}   = " " ;	  
-}
-
-#############################################################################
-# this subroutine implements a very stupid version of diff
-
-sub diff {
-	my $f1              = shift;
-	my $f2              = shift;
-	my $lineToBeginWith = shift;
-	my $NULL            = "" ;
-	my $diff_f1         = $NULL ;
-	my $diff_f2         = $NULL ;
-	my $retval          = $NULL ;
-	my $ret;
-	open(F1, "$f1") or die "Could not open file $f1";
-	open(F2, "$f2") or close(F1), die "Could not open file $f2";
-
-	while (defined($l1 = <F1>)) {
-	    if ($lineToBeginWith){
-		$lineToBeginWith -- ;
-		next ;
-	    }
-	    next if ($l1 =~ /^\#/);
-	    $ret = defined($l2 = <F2>);
-	    if ($ret) {
-		$ret = defined($l2 = <F2>) while ($ret && ($l2 =~ /^\#/)) ;
-		if ($ret) {
-		    if (!($l1 eq $l2)) {
-			
-			# ignore whitespace
-			$l1_clean = $l1 ;
-			$l2_clean = $l2 ;
-			$l1_clean =~ s/\s//g;
-			$l2_clean =~ s/\s//g;
-						  
-			if (!($l1_clean eq $l2_clean)) {
-			    $diff_f1 .= "${l1}" unless ($l1_clean eq $NULL);
-			    $diff_f2 .= "${l2}" unless ($l2_clean eq $NULL);
-			}
-		    }
-		}
-		else {
-		   next if ($l1 =~ /^\s*$/) ;
-		   $diff_f1 .= "${l1}";
-		}
-	    }
-	    else {
-		next if ($l1 =~ /^\s*$/) ;
-		$diff_f1 .= "${l1}";
-	    }
-	}
-	
-	while (defined($l2 = <F2>)) {
-	    	if (($l2 =~ /^\#/) || ($l2 =~ /^\s*$/)) { 
-		    next ;
-		}
-		else {
-		    $diff_f2 .= "${l2}" ;
-		}
-	}
-
-	close(F1);
-	close(F2);
-
-	$retval .= "- differences present in your config file but not in standard file:\n\n". "$diff_f1\n" if ($diff_f1) ;
-	$retval .= "- differences present in standard file but not in your config file:\n\n" . "$diff_f2"  if ($diff_f2) ;
-	return $retval ;
-}
-
-sub CompareStdConfigFiles {
-  # Compare each configuration file against its default version.  If it has changed,
-  # notify the user that the file has changed and will need to be checked by the
-  # user.  This should be safe to do because there should be no path information
-  # stored in these conf files, which are just schema stuff.
-  # printTrace("\nCheck if standard configuration files have changed",3);
-
-  # get the version of the DS to migrate
-  ($oldVersion, $oldMinor) = &getVersion($oldDir);
-  # get the version of the new DS
-  ($Version, $Minor) = &getVersion($root);
-
-  my $origFilePath = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}install${PATHSEP}config${PATHSEP}" ;
-  my $FilesChanged = "";
-  my $AllDiffs     = "***********************************************************************";
-  my $NoChanges    = "" ;
-  my $lineToBegin  = 0 ;
-  printTrace("\nVersion of the old directory server: $oldVersion.$oldMinor",0);
-  opendir(CONFDIR, $oldConfDir) or
-    die "Error: could not open migrated config dir $oldConfDir: $!";
-  
-  foreach $file (readdir(CONFDIR)) {
-       $origFile   = $origFilePath . $file ;
-       $configFile = $oldConfDir . $file ;
-      if ((! exists($userDefinedConfigFiles{lc($file)})) && (-f $origFile)) {
-	  my $lineToBegin = 1 if (lc($file) eq "slapd-collations.conf"); # we ignore the first line of slapd-collations 
-	  $diffs = &diff($configFile, $origFile, $lineToBegin);
-	  $lineToBegin = 0 if $lineToBegin ;
-	  if ($diffs) {
-	      $FilesChanged .= "\n$configFile";
-	      $AllDiffs     .= "\n$configFile  is different than the standard configuration file" ;
-	      $AllDiffs     .= "\nYou will need to check this file and make sure its changes are compatible ";
-	      $AllDiffs     .= "with the new directory server\nHere are the differences:\n";
-	      $AllDiffs     .= "$diffs \n\n";
-	      $AllDiffs     .= "***********************************************************************";
-	  } 
-	  else {
-  	      $NoChanges .= "\n$configFile";
-	  }
-      }
-   }
-  closedir(CONFDIR);
-
-if ($FilesChanged) {
-    printTrace("\nNo changes to old configuration files:$NoChanges",3) ;
-    printTrace("\n***********************************************************************",3) ;
-    printMsg("\nThe following standard files have been modified: $FilesChanged");
-    if ($NO_INPUT_USER) {
-	# do nothing
-    }
-    else {
-	printMsg("\nDo you want to see the differences Yes/No [No] ?") ;
-	my $answer = <STDIN> ;
-	if ($answer =~ /y|yes/i) {
-	    printMsg("$AllDiffs");
-	}
-	printMsg("\nDo you want to continue the migration Yes/No [No] ?");
-	$answer = <STDIN> ;
-	if (! ($answer =~ /y|yes/i)) {
-	    exit(1);
-	}
-    }
-  }
-}
-
-
-#############################################################################
-
-sub db2ldif {
-  my  ($conf, $ldif_dir) = @_;
-  $ENV{"$LIB_PATH"}="$oldDir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-  if (!$conf) {
-    $conf = "$oldHome${PATHSEP}config${PATHSEP}slapd.conf";
-  }
-  if (! $ldif_dir) { $ldif_dir = $ldif_rep ;}
-  if  (!(-d $ldif_dir)) {
-    mkdir($ldif_dir,0777) or die "can't create $ldif_rep to store temporary ldif files";
-  }
-  my $dir = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server";
-  chdir($dir) or
-    die "Error: could not change directory to $dir: $!";
-  my @suffixnames = keys(%DBNAMES) ;
-  foreach $suffixname (@suffixnames) {
-    my $ldif_file = $ldif_dir.$DBNAMES{$suffixname}.".ldif" ;
-    # If we are on NT, ${quote} is setup to "\"", else it's setup to ""
-    # As the suffix can contain some space characters, I write the suffix parameter: "\"$suffixname\"" rather than "${quote}$suffixname${quote}"
-    my @cmd =
-      ( "${quote}$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
-	"${PATHSEP}$slapdExecName${quote}", "db2ldif", '-n', '-f',
-	"${quote}$conf${quote}", '-a', "${quote}$ldif_file${quote}",
-	'-d', '1','-s',"\"$suffixname\"" );
-    open(DB2LDIF, "${quote}@cmd${quote} 2>&1|") or
-      die "Error: could not execute @cmd: $!";
-    sleep(1);			# allow pipe to fill with data
-    $ii = 0;			# counter
-    while (<DB2LDIF>) {
-      ++$ii;
-      if (($ii % 250) == 0) {
-	printMsg("  Processing...\n");
-      }
-    }
-    close(DB2LDIF);
-    # set the ownership of the ldif file; should be the same as the 5.x slapd user id
-    if ((! $isNt) && ($oldlocaluser ne $localuser)) {
-	if (-f $ldif_file) {
-	    chown( $newuid, $newgid, $ldif_file) or printMsg("\nUnable to change the ownership of $ldif_file to $localuser") ;
-	}
-    }
-  }
-  print "  Done.\n";
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";
-}
-
-#############################################################################
-
-# this is used to run the system() call, capture exit and signal codes,
-# and die() upon badness; the first argument is a directory to change
-# dir to, if any, and the rest are passed to system()
-sub mySystem {
-	my $rc = &mySystemNoDie(@_);
-	my ($dir, @args) = @_;
-    if ($rc == 0) {
-# success
-    } elsif ($rc == 0xff00) {
-		die "Error executing @args: error code $rc: $!";
-    } elsif ($rc > 0x80) {
-        $rc >>= 8;
-		die "Error executing @args: error code $rc: $!";
-    } else {
-        if ($rc &   0x80) {
-            $rc &= ~0x80;
-        } 
-		die "Error executing @args: received signal $rc: $!";
-    }
-
-	# usually won't get return value
-	return $rc;
-}
-
-# This version does not die but just returns the error code
-sub mySystemNoDie {
-	my ($dir, @args) = @_;
-	if ($dir && ($dir ne "")) {
-		chdir($dir) or die "Could not change directory to $dir: $!";
-	}
-	my $cmd = $args[0];
-	# the system {$cmd} avoids some NT shell quoting problems if the $cmd
-	# needs to be quoted e.g. contains spaces; the map puts double quotes
-	# around the arguments on NT which are stripped by the command
-	# interpreter cmd.exe; but don't quote things which are already quoted
-	my @fixargs = map { /^[\"].*[\"]$/ ? $_ : $quote . $_ . $quote } @args;
-	my $rc = 0;
-	if ($cmd =~ /[.](bat|cmd)$/) {
-		# we have to pass batch files directly to the NT command interpreter
-		$cmd = $com_spec;
-#		print "system $cmd /c \"@fixargs\"\n";
-		$rc = 0xffff & system {$cmd} '/c', "\"@fixargs\"";
-	} else {
-#		print "system $cmd @fixargs\n";
-        $rc = 0xffff & system {$cmd} @fixargs;
-        }
-	chdir(${curdir})  or die "Could not change directory to $curdir: $!";
-	return $rc;
-}
-
-#############################################################################
-sub manyLdif2db {
-  my %rev_dbnames = reverse(%DBNAMES);
-  @backends = keys(%rev_dbnames);
-  $ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-  chdir($slapdExecDir)  or die "Could not change directory to $slapdExecDir: $!";
-  foreach $backend (@backends) {
-    my $ldif = "${ldif_rep}$backend.ldif" ;
-    &Ldif2db($ldif, $backend);
-  }
-  # remove the empty ldif directory 
-  rmdir($ldif_rep);
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";
-}
-
-
-sub Ldif2db {
-  my $ldif    = shift ;
-  my $backend = shift ;
-  my $ldif2db_param = "ldif2db -D $serverHome -n $backend -i $ldif";
-  open(LDIF2DB, "${quote}${quote}$slapdExecName${quote} $ldif2db_param${quote} 2>&1 |") or die "Could not run ns-slapd program $ldif2db_exe\n";
-  sleep(1); # allow some data to accumulate in the pipe
-  while (<LDIF2DB>) {
-      printMsg($_);
-  }
-  close(LDIF2DB);
-  # remove the ldif file after the import
-  unlink($ldif) ;
-}
-
-#############################################################################
-
-#sub copyBak {
-#    opendir( OLDBAK, "$oldHome${PATHSEP}bak" ) || 
-#		die "Can't open directory $oldHome${PATHSEP}bak: $!: ";
-#    local ( @dirs ) = readdir( OLDBAK );
-#    closedir ( OLDBAK );
-#    for ( @dirs ) {
-#		if ( $_ eq "." || $_ eq ".." ) {
-#            next;
-#        } elsif ( -d "$oldHome${PATHSEP}bak${PATHSEP}$_" ) {
-#			$srcDir = "$oldHome${PATHSEP}bak${PATHSEP}$_";
-#			$destDir = "$serverHome${PATHSEP}bak${PATHSEP}$_";
-#			$srcLDIF = "$oldHome${PATHSEP}ldif${PATHSEP}bak.ldif";
-#			$destLDIF = "$serverHome${PATHSEP}ldif${PATHSEP}bak.ldif";
-#			mkdir( $destDir , 0755 ) if !( -e $destDir);
-#			# Converting database
-#			if ( !$isNT && $newuser ) {
-#				chown($newuid, $newgid, 
-#					  "$serverHome${PATHSEP}bak", $destDir);
-#			}
-#			&other_db2ldif($srcDir, $srcLDIF);
-#			if ($needAclUpg) {
-#				&mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
-#						  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
-#						  "${PATHSEP}aclupg$exe_suffix", '-d', '-i',
-#						  $srcLDIF, '-o', $destLDIF);
-#			} else {
-#				&copyBinFile($srcLDIF, $destLDIF);
-#			}
-#			&other_ldif2db($destLDIF, $destDir);
-#		}
-#	}
-#}
-#############################################################################
-
-sub startServer {
-  my $instanceDir = ${serverHome} ;
-  my $errLog = $instanceDir . $PATHSEP . 'logs' . $PATHSEP . 'errors';
-  # emulate tail -f
-  # if the last line we see does not contain "slapd started", try again
-  my $done = 0;
-  my $started = 0;
-  my $code = 0;
-  my $lastLine = "";
-  my $timeout = time + 240;	# 4 minutes
-  $ENV{"$LIB_PATH"}="${root}${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-
-  my $startCmd = $instanceDir . $PATHSEP . 'start' . $script_suffix;
-  if (! -f $startCmd) {
-    $startCmd = $instanceDir . $PATHSEP . 'start-slapd' . $script_suffix;
-  }
-  printTrace("\nInstanceDir: $instanceDir\n",4);
-  $code = &mySystem($instanceDir,$startCmd);
-  open(IN, $errLog) or die "Could not open error log $errLog: $!";
-  my $pos = tell(IN);
-  while (($done == 0) && (time < $timeout)) {
-    for (; ($done == 0) && ($_ = <IN>); $pos = tell(IN)) {
-      $lastLine = $_;
-      #			print;
-      # the server has already been started and shutdown once . . .
-      if (/slapd started\./) {
-	$started++;
-	if ($started == 2) {
-	  $done = 1;
-	}
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/Initialization Failed/) {
-	#				print "Server failed to start: $_";
-	$code = &mySystem($instanceDir, $startCmd);
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/exiting\./) {
-	#				print "Server failed to start: $_";
-	#$code = &mySystem($startCmd);
-	
-	$code = &mySystem($instanceDir, $startCmd);
-      }
-    }
-    if ($lastLine =~ /PR_Bind/) {
-      # server port conflicts with another one, just report and punt
-      print $lastLine;
-      print "This server cannot be started until the other server on this\n";
-      print "port is shutdown.\n";
-      $done = 1;
-    }
-    if ($done == 0) {
-      # rest a bit, then . . .
-      sleep(2);
-      # . . . reset the EOF status of the file desc
-      seek(IN, $pos, 0);
-    }
-  }
-  close(IN);
-
-  if ($started < 2) {
-    $! = $code;
-    #		$now = time;
-    #		if ($now > $timeout) {
-    #			print "Possible timeout: timeout=$timeout now=$now\n";
-    #		}
-    die "Error: could not start server: $!";
-  }
-
-  return 0;
-}
-
-sub stopServer {
-	my $root = shift;
-	my $name = shift;
-	$maxStopIterations = 5;
-	print "\nShutting down server $name . . .\n";
-	
-	$ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop' . $script_suffix . $quote;
-	if (! -f $stopCmd) {
-		$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop-slapd' . $script_suffix . $quote;
-	}
-
-	if (! -f $stopCmd) {
-		# no stop command, probably a 1.X system; for NT, we'll try net stop
-		# for unix, we'll get the pid and kill it
-		if ($isNT) {
-			$stopCmd = 'net stop ' . $name;
-		} else {
-			# see if there is a pid file
-			$pidfile = $root . $PATHSEP . $name . $PATHSEP . 'logs' .
-				$PATHSEP . 'pid';
-			if (open(PIDFILE, $pidfile)) {
-				chomp($pid = <PIDFILE>);
-				close(PIDFILE);
-				while ($maxStopIterations-- && !$exitCode) {
-					$exitCode = kill(15, $pid);
-				}
-				$stopCmd = undef;
-			}
-		}
-	}
-
-	# keep looping until the stop cmd returns an error code, which usually
-	# means that what ever we want to stop is stopped, or some other error
-	# occurred e.g. permission, or no such service
-	$exitCode = &runAndIgnoreOutput($stopCmd);
-#	print "stopServer: exitCode=$exitCode\n";
-	while ($stopCmd && $maxStopIterations-- && $exitCode) {
-		$exitCode = &runAndIgnoreOutput($stopCmd);
-#		print "stopServer: exitCode=$exitCode\n";
-	}
-
-	if (!$maxStopIterations) {
-		print "Warning: could not shutdown the server: $!\n";
-	}
-
-	sleep(10) ;
-
-	$exitCode = 0;
-
-}
-
-
-sub runAndIgnoreOutput {
-	my $cmd = shift;
-	printMsg(".");
-	open(RUNCMD, "${quote}$cmd${quote} 2>&1 |") or die "Error: could not run $cmd: $!";
-	printMsg(".");
-	sleep(1); # allow pipe to fill with data
-	printMsg(".");
-	while (<RUNCMD>) {
-#		print;
-	}
-	my $code = close(RUNCMD);
-#	print "runAndIgnore: code=$code status=$?\n";
-	return $?;
-}
-#############################################################################
-# migrate some of entries present in the old DSE.ldif like 
-# cn=snmp,cn=config
-# cn=encryption,cn=config
-# all the aci's
-
-sub MigrateDSE {
-  printTrace("\nMigrate DSE entries...",1);
-  open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-  my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-   while ($old_entry = readOneEntry $in) {
-        my $DN = $old_entry->getDN() ;
-	SWITCH: {
-	    # migrate the entrie: cn=snmp,cn=config
-	    if ($DN =~ /^cn=SNMP,cn=config$/i) {
-	      my $entry = $conn->search("$DN","base","objectclass=nsSNMP");
-	      if ($entry) {
-		my $res = $conn->update($old_entry);
-		if ($res) {
-		  printTrace("\n$DN updated !",2);
-		}
-		else {
-		  printMsg("\nFailed to update $DN");
-		}
-	      }
-	      else {
-		printMsg("\nUnable to get info under $DN");
-	      }
-	      last SWITCH; 
-	    }
-	    # migrate the entrie: cn=encryption,cn=config
-	    if ($DN =~ /cn=encryption,cn=config$/i) {
-	      if ($conn->search("$DN","base","objectclass=*")) {
-		my $res = $conn->update($old_entry);
-		if ($res) {
-		  printTrace("\n$DN updated !",2);
-		}
-		else {
-		  printMsg("\nFailed to update $DN");
-		}
-	      }
-	      else {
-		my $res = $conn->add($old_entry);
-		if ($res) {
-		  printTrace("\n$DN added !",2);
-		}
-		else {
-		  printMsg("\nFailed to add $DN");
-		}
-	      }
-	      last SWITCH; 
-	    }
-	    if (@{$old_entry->{aci}} && (! ($DN =~ /^cn=monitor$/i)) && (! ($DN =~ /^cn=schema$/i))) {
-	      # migrate aci's
-	      my $entry = $conn->search("$DN","base","objectclass=*");
-	      if ($entry) {
-		my $res = $conn->update($old_entry);
-		if ($res) {
-		  printTrace("\n$DN updated !",2);
-		}
-		else {
-		  printMsg("\nFailed to update $DN");
-		}
-	      }
-	      else {
-		my $res = $conn->add($old_entry);
-		if ($res) {
-		  printTrace("\n$DN added !",2);
-		}
-		else {
-		  printMsg("\nFailed to add $DN");
-		}
-	      }
-	      last SWITCH; 
-	    }
-	  }
-    }
-  close(DSELDIF);
-}
-#############################################################################
-# migrate SSL info
-
-sub MigrateSSL {
-  my $secPwd = 'bidon' ;
-  # copy the SSL directory
-  &copyDir("$oldHome${PATHSEP}ssl","$serverHome${PATHSEP}ssl");
-  # copy the cert db and key files
-  if ( -d "$oldDir${PATHSEP}alias") {
-    $aliasDir = "$root${PATHSEP}alias";
-    if (! -d $aliasDir) {
-      mkdir($aliasDir, 0750);
-    }
-    my $keydb         = "$aliasDir${PATHSEP}slapd-$newname-key3.db"  ;
-    my $certdb        = "$aliasDir${PATHSEP}slapd-$newname-cert7.db" ;
-    my $old_keydb     = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-key3.db" ;
-    my $old_certdb    = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-cert7.db"; 
-    my $keydb_backup  = "$aliasDir${PATHSEP}slapd-$newname-key3.db_backup"  ;
-    my $certdb_backup = "$aliasDir${PATHSEP}slapd-$newname-cert7.db_backup" ;
-    if (-f $old_keydb) {
-    	if (-f $keydb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$keydb already exists. backup in $keydb_backup ...");
-		&copyBinFile($keydb,$keydb_backup);
-		&copyBinFile($old_keydb,$keydb);
-	    }
-	    else {
-		print("\n\n$keydb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    &copyBinFile($old_keydb,$keydb);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_keydb,$keydb);
-	}
-    }
-    if (-f $old_certdb) {
-	if (-f $certdb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$certdb already exists. backup in $certdb_backup ...");
-		&copyBinFile($certdb,$certdb_backup);
-		&copyBinFile($old_certdb,$certdb);
-	    }
-	    else {
-		print("\n\n$certdb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    &copyBinFile($old_certdb,$certdb);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_certdb,$certdb);
-	}
-    }
-    # copy the old password file
-    if (-f "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt") {
-      &copyBinFile(
-		   "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt",
-		   "$aliasDir${PATHSEP}$type-$newname-pin.txt"
-		  );
-    }
-  }
-
-}
-
-sub DisableSSL {
-  my $entry      = $conn->search("cn=config","base","objectclass=*");
-  my $LDAPparam =  "nsslapd-security" ;
-  my $Value     = "off" ;
-  if ($entry->{$LDAPparam}[0] ne $Value) { 
-    printTrace("\nDisable SSL...",1);
-    $entry->setValues($LDAPparam, $Value);
-  }
-  my $res = $conn->update($entry);
-  if ($res) {
-    printTrace("\nSSL disabled",2);
-  }
-  else {
-    printMsg("\nCan't disabled SSL. The server may have problems to start");
-  }
-}
-
-# enable the migration of client authentication informations
-sub MigrateCertmap {
-  # backup the old 5.x certmap.conf and replace it with the 4.x certmap.conf file
-  my $oldCertmap = "$oldDir${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf";
-  my $newCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf"  ;
-  my $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-  if (&hasChangedoldCertmap($oldCertmap)) {
-      if ($NO_INPUT_USER) {
-	  printMsg("\n$newCertmap has been backup in $backupCertmap"); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-      else {
-	  my $Ask = 1 ;  
-	  while ($Ask) {
-	      printMsg("\n\nWhere do you want to back up the file $newCertmap [$backupCertmap] ?") ;
-	      my $Answer = <STDIN> ;
-	      $backupCertmap = $Answer if ($Answer ne "\n");
-	      chomp($backupCertmap);
-	      printTrace("\nDest: .$backupCertmap.",4);
-	      if (-e $backupCertmap) {
-		  printMsg("\n\n$backupCertmap already exists. Do you want to overwrite it Yes/No [No] ?") ;
-		  if (<STDIN> =~ /yes|y/i) {
-		      $Ask = 0 ;
-		  }
-		  else {
-		      $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-		  }
-	      }
-	      else {
-		  $Ask = 0 ;
-	      }
-	  }
-	  printTrace("\nBackup file: $newCertmap in $backupCertmap",4); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-  }
-  else {
-  }
-}
-
-sub hasChangedoldCertmap {
-    my $certmapfile = shift ;
-    my @reference = ("certmap default         default",
-		     "default:DNComps",
-		     "default:FilterComps     e") ;
-    my $cpt = 0 ;
-    printTrace("\nhasChangedoldCertmap",3);
-    open(CERTMAP,"< $certmapfile");
-    while (<CERTMAP>) {
-	if ((! /^\s*#/) && (! /^\s*$/)) {
-	    my $ref = $reference[$cpt] ;
-	    printTrace("\nValue: $_, ref: $ref",4);
-	    if (! /^\s*$ref\s*$/) {
-		return 1 ;
-	    }
-	    else {
-		$cpt++ ;
-	    }
-	}
-    }
-    close (CERTMAP);
-    printTrace("\ncpt: $cpt",4);
-    if ($cpt < $#reference) {
-	return 1 ;
-    }
-    else {
-        return 0 ;
-    }	
-}
-#############################################################################
-# copy a directory to another
-
-sub copyDir {
-    my	$src = shift;
-    my	$dest = shift;
-	my  $exclude = shift;
-
-    opendir( SRC, $src ) or die "Can't open directory $src: $!: ";
-	my $mode;
-	my $uid;
-	my $gid;
-    mkdir ( $dest , 0755 ) or die "\nCan't create directory $dest. \nPlease check you have enough rights to create it and/or check that your parent directory exists.\n" if !( -e $dest );
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    local ( @files ) = readdir ( SRC );
-    closedir( SRC );
-    for ( @files ) {
-		if ( $_ eq "." || $_ eq ".." ) {
-			next;
-		} elsif ( $exclude && /$exclude/ ) {
-			next;
-		} elsif( -d "$src${PATHSEP}$_")  {
-			&copyDir ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_" ); 
-		} else {
-			&copyBinFile ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_");
-		}
-    }
-}
-
-sub copyBinFile {
-    my	$src = shift;
-    my	$dest = shift;
-    my  $buf = "";
-	my  $bufsize = 8192;
-
-    open( SRC, $src ) || die "Can't open $src: $!\n";
-	# if we are given a directory destination instead of a file, extract the
-	# filename portion of the source to use as the destination filename
-	if (-d $dest) {
-		$dest = $dest . $PATHSEP . &basename($src);
-	}
-    open( DEST, ">$dest" ) || die "Can't create $dest: $!\n";
-    binmode SRC;
-    binmode DEST;
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    while (read(SRC, $buf, $bufsize)) {
-		print DEST $buf;
-    }
-    close( SRC );
-    close( DEST );
-}
-#############################################################################
-# backup 5.x configuration files
-# backup the directory <root_server5>/slapd-instance/config dans <root_server5>/slapd-instance/BackupConfig
-
-sub backupConfigFiles {
-  # backup the 5.x config files
-  my $src = "$serverHome${PATHSEP}config" ;
-  my $dest = "$serverHome${PATHSEP}config_backup" ;
-  if ($NO_INPUT_USER) {
-      printMsg("\n$src has been backup in $dest"); 
-      &copyDir($src,$dest);
-  }
-  else {
-      my $Ask = 1 ;  
-      while ($Ask) {
-	  printMsg("\n\nWhere do you want to back up your configuration directory [$dest] ?") ;
-	  my $Answer = <STDIN> ;
-	  $dest = $Answer if ($Answer ne "\n");
-	  chomp($dest);
-	  printTrace("\nDest: .$dest.",4);
-	  if (-e $dest) {
-	      printMsg("\n\n$dest already exists. Do you want to overwrite it Yes/No [No] ?") ;
-	      if (<STDIN> =~ /yes|y/i) {
-		  $Ask = 0 ;
-	      }
-	      else {
-		  $dest = "$serverHome${PATHSEP}config_backup" ;
-	      }
-	  }
-	  else {
-	      $Ask = 0 ;
-	  }
-      }
-      printTrace("\nBackup Directory: $src in $dest",4); 
-      &copyDir($src,$dest);
-  }
-}
-#############################################################################
-
-sub getLDAPservername {
-    my $oldLDAPservername;
-    my $LDAPservername;
-    open(OLDSLAPDCONF, $oldSlapdConf) or
-	die "\nError: could not open old config file $oldSlapdConf \n";
-    while(<OLDSLAPDCONF>) {
-	chop;
-	if (/^localhost\s+/i) {
-	    ($oldLDAPservername = $') =~ s/^[\"]//;;
-	    $oldLDAPservername =~ s/[\"]$//;
-	    printTrace("\nName of the old LDAP server: $oldLDAPservername",3);
-        }
-    }
-    close(OLDSLAPDCONF);
-
-    open( DSELDIF, "< $DSEldif" ) || die "\nCan't open $DSEldif \n";
-    my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-    while ($entry = readOneEntry $in) {
-        my $DN = $entry->getDN() ;
-	if ($DN =~ /^cn=config$/i) {
-	    my $localhost = "nsslapd-localhost";
-	    my @values = $entry->getValues($localhost);
-	    if ($#values != -1) {
-		$LDAPservername = $values[0];
-	    }
-	    break;
-	}	
-    } 
-    close(DSELDIF);
-    # check 4.x and 5.x are installed on the same physical machine.
-    if (lc($oldLDAPservername) ne lc($LDAPservername)) {
- 	 # warn the user he tries to migrate a 4.x server installed on a different machine from the 5.x one
-       	 printMsg("\n\nYour 4.x server is on $oldLDAPservername, and your 5.x server is on $LDAPservername. We don't support migration on different machines. Do you want to continue ? Yes/No [No]:") ;
-       	 if (! (<STDIN> =~ /yes|y/i)) {
-       	     return -1;
-       	 }
-     }
-     return $LDAPservername ;       
-}
-
-#############################################################################
-
-sub getVersion {
-	my $dir      = shift;
-	my $version     = 0;
-	my $minor       = 0;
-	my $buildNumber = 0;
-	my $progDir     = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-	my $progDir2    = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}";
-
-	# find the slapd executable
-	$prog = $dir . $progDir . $slapdExecName;
-	if (! -f $prog) {
-	    $prog = $dir . $progDir2 . $slapdExecName;
-	    if (-f $prog && $isNT) {
-	       	# if slapd is in bin/slapd and we're on NT, just assume version 1;
-	       	# apparently, slapd.exe doesn't like the -v argument . . .
-	       	return ( '1', $minor );
-	    }
-	    else{
-		die "Could not run slapd program $prog: $!";
-	    }
-	}
-	else {
-	    chdir($dir . $progDir);
-	}
-	$ENV{"$LIB_PATH"}="$dir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	# read the old version from the old slapd program
-
-	open(F, "${quote}${quote}$prog${quote} -v${quote} 2>&1 |") or
-		die "Could not run slapd program $prog: $!";
-	sleep(1); # allow some data to accumulate in the pipe
-#	print "Output from $prog -v:\n";
-	while (<F>) {
-		print;
-		if (/^Netscape-Directory\/(\d+)\.(\d+)\s+(\S+)/) {
-			$version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-		elsif (/^Netscape-Directory\(restrict?ed-mode\)\/(\d+)\.(\d+)\s+(\S+)/) { # we can have restricted-mode or restriced-mode ...
-		        $version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-		elsif (/^iPlanet-Directory\/(\d+)\.(\d+)\s+(\S+)/i) {
-			$version     = $1;
-			$minor       = $2;
-			$buildNumber = $3;
-			last;
-		}
-	}
-	$code = close(F);
-#	print "$prog returned code=$code status=$?\n";
-	$ENV{"$LIB_PATH"}="$root${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	
-	if ($version == 0) {
-	    printMsg("\nCould not determine version of the directory server in $dir: ");
-	    printMsg("\nBe careful, this script is designed to migrate only from 4.x Netscape Directory Server to 5.x. Do you want to continue ? [no]: ");
-	    my $answer = <STDIN> ;
-	    if (! ($answer =~ /y|yes/i)) {
-		exit(1);
-	    }
-	    $version = 4 ; # setup to 4 and pray ...
-	}
-
-	# distinguish the 4.1 and the 4.11 thanks to the buildNumber
-	if (($version == 4) && ($minor == 1)){
-	    if (! ($buildNumber =~ /^B99\.16/)) {
-		# it's not a 4.1 Netscape Directory Server => it's a 4.11
-		$minor = 11 ;
-	    }
-	}
-	return ( $version, $minor );
-}
-
-#############################################################################
-
-sub getDiff {
-    # we get references to arrays
-    my $elements = shift ; 
-    my $existing_elements = shift ;
-    my %count   = () ;
-    my %countEE = () ;
-    @diff       = () ;
-    foreach $e (@{$elements}, @{$existing_elements}) { $count{$e}++ ;}
-    foreach $e (@{existing_elements}) { $countEE{$e}++ ;}
-    foreach $e (@{$elements}) {
-	# if $e is only present in @$elements, we push it to the diff array
-	if (($count{$e} == 1) && ($countEE{$e} == 0)) {
-	    push @diff, $e ;
-	}
-    }
-    return @diff ;
-}
-
-###############################################################################################
-sub testIndexUpdating {
-         #my $entry = $conn->newEntry();
-	 #$entry->setDN("cn=djeattribute,cn=index,cn=MigratedDB_5,cn=ldbm database,cn=plugins,cn=config");
-         my $entry = $conn->search("cn=mail,cn=index,cn=MigratedDB_2,cn=ldbm database,cn=plugins,cn=config","base","objectclass=nsIndex");
-         my @types = ("pres", "sub", "eq") ;
-         my @existing_types = $entry->getValues("nsindextype");
-          my @typesToAdd     = &getDiff(\@types, \@existing_types);
-	  foreach $newtype (@typesToAdd) {
-	      $entry->addValue("nsindextype", $newtype); printTrace("\nnewtype: $newtype",2); 
-	  }
-	  my $res = $conn->update($entry) ;
-         if ($res) {print("\nUpdate index mail\n");}
-         else { print("\ncan't update index mail");}
-
-         $entry = $conn->search("cn=givenName,cn=index,cn=MigratedDB_2,cn=ldbm database,cn=plugins,cn=config","base","objectclass=nsIndex");
-         @types = ("pres", "sub", "eq") ;
-         @existing_types = $entry->getValues("nsindextype"); print("\ngivenName, existing_types: @existing_types");
-         @typesToAdd     = &getDiff(\@types, \@existing_types); print("\nTypesToAdd: @typesToAdd");
-	  foreach $newtype (@typesToAdd) {
-	      $entry->addValue("nsindextype", $newtype); printTrace("\nnewtype: $newtype",2); 
-	  }
-	  my $res = $conn->update($entry) ;
-         if ($res) {print("\nUpdate index givenName\n");}
-         else { print("\ncan't update index givenName");}
-     }
-
-
-###############################################################################################
-sub normalizeDir {
-    my $dir = shift ;
-    my $dir_prec = "" ;
-    while ($dir_prec ne $dir) {
-	$dir_prec = $dir ;
-	if ($isNT) {
-	    grep { s@\\\\@\\@g } $dir ;
-        }
-        else {
-	    grep { s@//@/@g } $dir ;
-        }
-    }
-    return $dir ;
-}
-
-
-###############################################################################################
-# return 1 if the value parameters is 
-sub isAllowedPlugin {
-    my $Value = lc(shift) ;
-    if ($allowedPlugins{$Value}) {
-	return 1 ;
-    }
-    else {
-	return 0 ;
-    }
-   
-}
-
-
-sub getSyntaxOid {
-    my $Value = lc(shift) ;
-    return $allowedPlugins{$Value} ;
-}
-
-###############################################################################################
-# return 1 if the value given in parameters is an allowed modifier
-sub isAllowedModifier {
-    my $Value = lc(shift) ;
-    if ($allowedModifiers{$Value}) {
-	return 1 ; 
-    }
-    else {
-	return 0 ;
-    }
-}
-
-sub getModifierValue {
-    my $Value = lc(shift) ;
-    return $allowedModifiers{$Value} ;
-}
-
-###############################################################################################
-
-sub GetTime {
-    my $tm = localtime;
-    (my $sec, my $min, my $hour, my $dd, my $mm, my $yy) = ($tm->sec, $tm->min, $tm->hour, $tm->mday, ($tm->mon)+1, ($tm->year)+1900);
-    $sec  = "0$sec"  unless $sec > 9  ;
-    $min  = "0$min"  unless $min > 9  ;
-    $hour = "0$hour" unless $hour > 9 ;
-    $dd   = "0$dd"   unless $dd > 9   ;
-    $mm   = "0$mm"   unless $mm > 9   ;
-    return ($sec, $min, $hour, $dd, $mm, $yy);
-}
-
-###############################################################################################
-# get uid and group id of the 5.x slapd server.
-# The uid is done through the nsslapd-localuser attribute
-
-sub getuid_gid {
-    my $newuid ;
-    my $newgid ;
-    my $localuser ;
-    my $localuser_attr = "nsslapd-localuser" ;
-    if (! $isNT) {
-	my $entry = $conn->search("cn=config ", "base","objectclass=*", 0, ($localuser_attr)) ;
-	# Tests wether we succeed to get the entry cn=config
-	die "\nCan't get the entry cn=config \n" unless ($entry);     
-	my @values = $entry->getValues($localuser_attr);
-	if ($#values == -1 || ($values[0] eq "") ) { # tests wether the nsslapd-localuser attribute has a value
-	    printMsg("\nNo localuser has been found in the configuration of the directory. ");
-	    if ($NO_INPUT_USER) {
-		printMsg("\nWe considered nobody as the localuser");
-		$localuser = "nobody" ;
-	    }
-	    else {
-		my $Ask = 1 ;  
-		while ($Ask) {
-		    printMsg("\nUnder what user does your $Version.$Minor directory server run [nobody] ? ") ;
-		    $localuser = <STDIN> ;
-		    chomp($localuser);
-		    $localuser = "nobody" if ($localuser eq "");
-		    ($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ;
-		    if ($newuid) {
-			$Ask = 0 ;
-		    }
-		    else {
-			printMsg("\nError: $localuser is unknown from the system ");
-		    }
-		}
-	    }	
-	}
-	else {
-	    $localuser = $values[0]; # returns the first value (we should only have one localuser)
-	    my $size = $#values ;
-	}
-	($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ; 
-	return ($localuser, $newuid, $newgid) ;
-    }
-    else {
-	return () ;
-    }
-}
-
-
-###############################################################################################
-# get uid and group id of the 4.x slapd server.
-
-sub getolduid_gid {
-    my $oldlocaluser ;
-    if (! $isNT) {
-       	open(CONF,  $oldSlapdConf) or die "\nError: cannot open $oldSlapdConf: $!\n";
-       	while (<CONF>) {
-       		if (/^localuser\s+/i) {
-       			chomp($oldlocaluser = $');
-       			last;
-       		}
-       	}
-       	close(CONF);
-	($olduid, $oldgid) = (getpwnam("$oldlocaluser"))[2..3] ; 
-	return ($oldlocaluser, $olduid, $oldgid) ; 
-    }
-    else {
-	return ();
-    }
-}
-
-###############################################################################################
-# get current directory
-
-sub getCwd {
-        my $command = $isNT ? "cd" : "/bin/pwd";
-        open(PWDCMD, "$command 2>&1 |") or
-                die "Error: could not execute $command: $!";
-        # without the following sleep, reading from the pipe will
-        # return nothing; I guess it gives the pwd command time
-        # to get some data to read . . .
-        sleep(1);
-        my $currentdir;
-        while (<PWDCMD>) {
-                if (!$currentdir) {
-                        chomp($currentdir = $_);
-                }
-        }
-        my $code = close(PWDCMD);
-#       if ($code || $?) {
-#               print "$command returned code=$code status=$? dir=$curdir\n";
-#       }
-#       print "getCwd curdir=\[$curdir\]\n";
-        return $currentdir;
-}

ldap/admin/src/scripts/template-migrateTo6

@@ -1,3316 +0,0 @@
-#{{PERL-EXEC}}
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-#
-
-# enable the use of our bundled perldap with our bundled ldapsdk libraries
-# all of this nonsense can be omitted if the mozldapsdk and perldap are
-# installed in the operating system locations (e.g. /usr/lib /usr/lib/perl5)
-BEGIN {
-	my $sroot = "{{DS-ROOT}}";
-	push @INC, "$sroot/lib/perl/arch", "$sroot/lib/perl";
-	if ($ENV{LD_LIBRARY_PATH}) {
-		$ENV{LD_LIBRARY_PATH} .= ":";
-	}
-	$ENV{LD_LIBRARY_PATH} .= "$sroot/shared/lib";
-	# this is only needed for HP/ux PA-RISC, but it doesn't hurt other platforms
-	if ($ENV{SHLIB_PATH}) {
-		$ENV{SHLIB_PATH} .= ":";
-	}
-	$ENV{SHLIB_PATH} .= "$sroot/shared/lib";
-}
-# Migrate a old directory server to a 6.2 directory server
-
-########################################################################################################
-# enable the use of Perldap functions
-require DynaLoader;
-
-use Getopt::Std;
-use Mozilla::LDAP::Conn;
-use Mozilla::LDAP::Entry;
-use Mozilla::LDAP::LDIF;
-use Mozilla::LDAP::Utils qw(:all);
-use Mozilla::LDAP::API qw(:api :ssl :apiv3 :constant); # Direct access to C API
-use Time::localtime;
-
-########################################################################################################
-use Class::Struct ; # load struct-building module
-
-struct S_index => {
-    names    => '@' ,
-    types    => '@' ,
-    oids     => '@' ,
-    specific => '$'    
-		  };
-
-
-struct S_plugin => {
-    name     => '$' ,
-    type     => '$' ,
-    enable   => '$' ,
-    args     => '@' 
-                  };
-#####################################################################################################
-
-sub usage {
-        print(STDERR "\nUsage: $0 -D rootdn { -w password | -w - | -j filename } -p port \n");
-	print(STDERR "       -o OldInstancePath -n NewInstancePath [-t tracelevel] [-L logfile]\n");
-        print(STDERR "************** parameters in brackets are optionals, others are required **************\n");
-        print(STDERR " Opts: -D rootdn              - New Directory Manager\n");
-        print(STDERR "     : -w password            - New Directory Manager's password\n");
-        print(STDERR "     : -w -                   - Prompt for New Directory Manager's password\n");
-        print(STDERR "     : -j filename            - Read New Directory Manager's password from file\n");
-        print(STDERR "     : -p port                - New Directory Server port\n");
-        print(STDERR "     : -o OldInstancePath     - Path of the Old instance to migrate \n");
-        print(STDERR "     : -n NewInstancePath     - Path of the new instance\n");
-        print(STDERR "     : [-d dataPath]          - Path to directory containing data files to import into new instance\n");
-        print(STDERR "     : [-v oldVersion]        - Old version (obtained by running $slapdExecName -v\n");
-        print(STDERR "     : [-t tracelevel]        - specify the level of trace (0..3)\n");
-        print(STDERR "     : [-L logfile]           - specify the file to log the migration report \n");
-	
-       
-      }
-
-
-
-#############
-BEGIN {
-  
-  require 'uname.lib' ;
-  $isNT = -d '\\';
-  $PATHSEP = $isNT ? "\\" : "/";
-  ${SEP} = $isNT ? ";" : ":" ; 
-  @INC = ( '.', '../../../admin/admin/bin');
-  grep { s@/@\\@g } @INC if $isNT;
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-  # NT needs quotes around some things unix doesn't
-  $quote = $isNT ? "\"" : "";
-
-  # If this variable is set, all file/directory creation will make sure the mode
-  # and ownership of the destination is the same as the source
-  $PRESERVE = 1 if (!$isNT);
-  $script_suffix = $isNT ? ".bat" : "";
-  $exe_suffix = $isNT ? ".exe" : "";
-    if ($isNT) {
-		$os = "WINNT";
-    } else {
-    	$os = &uname("-s");
-    }
-	if ($isNT) {
-		# we have to pass batch files directly to the NT command interpreter
-		$com_spec = $ENV{ComSpec};
-		if (!$com_spec) {
-			$com_spec = $ENV{COMSPEC};
-		}
-		if (!$com_spec || ! -f $com_spec) {
-			# find the first available command interpreter
-			foreach $drive (c..z) {
-				$com_spec = "$drive:\\winnt\\system32\\cmd.exe";
-				last if (-f $com_spec);
-				$com_spec = undef;
-			}
-			if (! $com_spec) {
-				# punt and pray
-				$com_spec = 'c:\winnt\system32\cmd.exe';
-			}
-		}
-	}
-    if ( $os eq "AIX" ) {
-		$dll_suffix = "_shr.a";
-    }	
-    elsif ( $os eq "HP-UX" ) {
-		$dll_suffix = ".sl";
-    }	
-    elsif ( $os eq "WINNT" ) {
-		$dll_suffix = ".dll";
-    }	
-    else {
-		$dll_suffix = ".so";
-    }	
-	$slapdExecName = $isNT ? 'slapd.exe' : './ns-slapd';
-	# if this flag is set, we will migrate the old database
-	# by doing a db2ldif -> ldif2db; 
-	$convertToLDIF = 1;
-	select STDERR;
-	$| = 1;
-	select STDOUT;
-	$| = 1;
-	# if the old value for dbcachesize is less than this, make it this
-	$MIN_DBCACHESIZE = '500000';
-}
-
-SWITCH: {
-	    if ($os eq "AIX") {
-		$LIB_PATH = "LIBPATH" ;
-		last SWITCH ;
-	    }
-	    if ($os eq "HP-UX") {
-		$LIB_PATH = "SHLIB_PATH" ;
-		last SWITCH ;
-	    }
-	    if ($isNT) {
-                $LIB_PATH = "PATH" ;
-	        last SWITCH ;
-            }
-            else {
-                $LIB_PATH = "LD_LIBRARY_PATH" ;
-	        last SWITCH ;
-            }
-       }  
-
-  # Old parameters
-  ${oldDir}         = "" ;                
-  ${oldname}        = "" ;             
-  ${oldHome}        = "" ;   
-  ${oldConfDir}     = "" ;
-  ${oldlocaluser} ;
-  ${olduid} ;
-  ${oldgid} ;
-
-  # New parameters            
-  ${root}           = "{{DS-ROOT}}" ;               
-  ${type}           = "" ;               
-  ${newname}        = "" ; 
-  ${newport}        = "" ;                                     
-  ${rootDN}         = "" ;
-  ${rootpwd}        = "" ;
-  ${localhost}      = "" ;
-  ${LogFileReport}  = "" ;
-  ${newuid} ;
-  ${localuser} ;
-  ${newgid} ;
-  $NO_INPUT_USER    = 0  ; # by default user can give inputs during the migration process
-  ${curdir}          = getCwd();
-  ${slapdExecDir}    = "${root}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-
-  # specify the level of trace
-  $TRACELEVEL=1;
-
-  $LDAP_SERVER_UNREACHABLE = 81;
-
-  # get input users
-  &getParameters() ;
-  ${oldDir}          = &normalizeDir("${oldDir}");
-  ${oldHome}         = "${oldDir}${PATHSEP}$type-$oldname" ;    
-  ${oldConfDir}      = "${oldHome}${PATHSEP}config${PATHSEP}" ; 
-  ${oldSlapdConf}    = "${oldConfDir}slapd.conf" ;
-  ${oldDSEldif}      = "${oldConfDir}dse.ldif" ;        
-  ${serverHome}      = "${root}${PATHSEP}$type-$newname" ;
-  ${DSEldif}         = "$serverHome${PATHSEP}config${PATHSEP}dse.ldif";
-  ${ldif_rep}        = "${oldConfDir}${PATHSEP}ldif${PATHSEP}" ; 
-  ${oldSlapdExecDir} = "${oldDir}${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-  
- 
-  
-  
-  open(LOGFILE, ">> $LogFileReport");
-
-  printTrace("\noldDir: $oldDir, oldHome: $oldHome, \noldConfDir: $oldConfDir, \noldSlapdConf: $oldSlapdConf, \nldif_rep: $ldif_rep, \nrootDN: $rootDN, \nPwd: ******, \nPort: $newport, \nNewname: $newname\n",3);
-  printTrace("\nLIB_PATH: $LIB_PATH",4);
-
-  if (!(-d $serverHome)) {
-    printMsg("\n$serverHome doesn't exist\n");
-    exit(1);
-  }
-  if (!(-d $oldHome)) {
-    printMsg("\n$oldHome doesn't exist\n");
-    exit(1);
-  }
-
-  if ($olddatadir && !(-d $olddatadir)) {
-    print("\n$olddatadir doesn't exist\n");
-    exit(1);
-  }
-
-#define CONFIG_DATABASE_DIRECTIVE       "database"
-#define CONFIG_DATABASE_ATTRIBUTE       "nsslapd-database"
-#define CONFIG_PLUGIN_DIRECTIVE         "plugin"
-#define CONFIG_PLUGIN_ATTRIBUTE         "nsslapd-plugin"
-#define CONFIG_SIZELIMIT_DIRECTIVE      "sizelimit"
-#define CONFIG_SIZELIMIT_ATTRIBUTE      "nsslapd-sizelimit"
-#define CONFIG_ORCAUTO_DIRECTIVE        "orcauto"
-#define CONFIG_ORCAUTO_ATTRIBUTE        "nsslapd-orcauto"
-#define CONFIG_TIMELIMIT_DIRECTIVE      "timelimit"
-#define CONFIG_TIMELIMIT_ATTRIBUTE      "nsslapd-timelimit"
-#define CONFIG_SUFFIX_DIRECTIVE         "suffix"
-#define CONFIG_SUFFIX_ATTRIBUTE         "nsslapd-suffix"
-#define CONFIG_READONLY_DIRECTIVE       "readonly"
-#define CONFIG_READONLY_ATTRIBUTE       "nsslapd-readonly"
-#define CONFIG_REFERRAL_DIRECTIVE       "referral"
-#define CONFIG_REFERRAL_ATTRIBUTE       "nsslapd-referral"
-#define CONFIG_OBJECTCLASS_DIRECTIVE    "objectclass"
-#define CONFIG_OBJECTCLASS_ATTRIBUTE    "nsslapd-objectclass"
-#define CONFIG_ATTRIBUTE_DIRECTIVE      "attribute"
-#define CONFIG_ATTRIBUTE_ATTRIBUTE      "nsslapd-attribute"
-#define CONFIG_SCHEMACHECK_DIRECTIVE    "schemacheck"
-#define CONFIG_SCHEMACHECK_ATTRIBUTE    "nsslapd-schemacheck"
-#define CONFIG_LOGLEVEL_DIRECTIVE       "loglevel"
-#define CONFIG_LOGLEVEL_ATTRIBUTE       "nsslapd-errorlog-level"
-#define CONFIG_ACCESSLOGLEVEL_DIRECTIVE "accessloglevel"
-#define CONFIG_ACCESSLOGLEVEL_ATTRIBUTE "nsslapd-accesslog-level"
-#define CONFIG_ACCESSLOG_MAXNUMOFLOGSPERDIR_DIRECTIVE "accesslog-maxNumOfLogsPerDir"
-#define CONFIG_ACCESSLOG_MAXNUMOFLOGSPERDIR_ATTRIBUTE "nsslapd-accesslog-maxlogsperdir"
-#define CONFIG_ERRORLOG_MAXNUMOFLOGSPERDIR_DIRECTIVE  "errorlog-maxNumOfLogsPerDir"
-#define CONFIG_ERRORLOG_MAXNUMOFLOGSPERDIR_ATTRIBUTE  "nsslapd-errorlog-maxlogsperdir"
-#define CONFIG_AUDITLOG_MAXNUMOFLOGSPERDIR_DIRECTIVE  "auditlog-maxNumOfLogsPerDir"
-#define CONFIG_AUDITLOG_MAXNUMOFLOGSPERDIR_ATTRIBUTE  "nsslapd-auditlog-maxlogsperdir"
-#define CONFIG_ACCESSLOG_MAXLOGSIZE_DIRECTIVE "accesslog-maxlogsize"
-#define CONFIG_ACCESSLOG_MAXLOGSIZE_ATTRIBUTE "nsslapd-accesslog-maxlogsize"
-#define CONFIG_ERRORLOG_MAXLOGSIZE_DIRECTIVE "errorlog-maxlogsize"
-#define CONFIG_ERRORLOG_MAXLOGSIZE_ATTRIBUTE "nsslapd-errorlog-maxlogsize"
-#define CONFIG_AUDITLOG_MAXLOGSIZE_DIRECTIVE "auditlog-maxlogsize"
-#define CONFIG_AUDITLOG_MAXLOGSIZE_ATTRIBUTE "nsslapd-auditlog-maxlogsize"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIME_DIRECTIVE "accesslog-logrotationtime"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIME_ATTRIBUTE "nsslapd-accesslog-logrotationtime"
-#define CONFIG_ERRORLOG_LOGROTATIONTIME_DIRECTIVE "errorlog-logrotationtime"
-#define CONFIG_ERRORLOG_LOGROTATIONTIME_ATTRIBUTE "nsslapd-errorlog-logrotationtime"
-#define CONFIG_AUDITLOG_LOGROTATIONTIME_DIRECTIVE "auditlog-logrotationtime"
-#define CONFIG_AUDITLOG_LOGROTATIONTIME_ATTRIBUTE "nsslapd-auditlog-logrotationtime"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIMEUNIT_DIRECTIVE "accesslog-logrotationtimeunit"
-#define CONFIG_ACCESSLOG_LOGROTATIONTIMEUNIT_ATTRIBUTE "nsslapd-accesslog-logrotationtimeunit"
-#define CONFIG_ERRORLOG_LOGROTATIONTIMEUNIT_DIRECTIVE "errorlog-logrotationtimeunit"
-#define CONFIG_ERRORLOG_LOGROTATIONTIMEUNIT_ATTRIBUTE "nsslapd-errorlog-logrotationtimeunit"
-#define CONFIG_AUDITLOG_LOGROTATIONTIMEUNIT_DIRECTIVE "auditlog-logrotationtimeunit"
-#define CONFIG_AUDITLOG_LOGROTATIONTIMEUNIT_ATTRIBUTE "nsslapd-auditlog-logrotationtimeunit"
-#define CONFIG_ACCESSLOG_MAXLOGDISKSPACE_DIRECTIVE "accesslog-maxlogdiskspace"
-#define CONFIG_ACCESSLOG_MAXLOGDISKSPACE_ATTRIBUTE "nsslapd-accesslog-logmaxdiskspace"
-#define CONFIG_ERRORLOG_MAXLOGDISKSPACE_DIRECTIVE "errorlog-maxlogdiskspace"
-#define CONFIG_ERRORLOG_MAXLOGDISKSPACE_ATTRIBUTE "nsslapd-errorlog-logmaxdiskspace"
-#define CONFIG_AUDITLOG_MAXLOGDISKSPACE_DIRECTIVE "auditlog-maxlogdiskspace"
-#define CONFIG_AUDITLOG_MAXLOGDISKSPACE_ATTRIBUTE "nsslapd-auditlog-logmaxdiskspace"
-#define CONFIG_ACCESSLOG_MINFREEDISKSPACE_DIRECTIVE "accesslog-minfreediskspace"
-#define CONFIG_ACCESSLOG_MINFREEDISKSPACE_ATTRIBUTE "nsslapd-accesslog-logminfreediskspace"
-#define CONFIG_ERRORLOG_MINFREEDISKSPACE_DIRECTIVE "errorlog-minfreediskspace"
-#define CONFIG_ERRORLOG_MINFREEDISKSPACE_ATTRIBUTE "nsslapd-errorlog-logminfreediskspace"
-#define CONFIG_AUDITLOG_MINFREEDISKSPACE_DIRECTIVE "auditlog-minfreediskspace"
-#define CONFIG_AUDITLOG_MINFREEDISKSPACE_ATTRIBUTE "nsslapd-auditlog-logminfreediskspace"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIME_DIRECTIVE "accesslog-logexpirationtime"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIME_ATTRIBUTE "nsslapd-accesslog-logexpirationtime"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIME_DIRECTIVE "errorlog-logexpirationtime"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIME_ATTRIBUTE "nsslapd-errorlog-logexpirationtime"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIME_DIRECTIVE "auditlog-logexpirationtime"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIME_ATTRIBUTE "nsslapd-auditlog-logexpirationtime"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIMEUNIT_DIRECTIVE "accesslog-logexpirationtimeunit"
-#define CONFIG_ACCESSLOG_LOGEXPIRATIONTIMEUNIT_ATTRIBUTE "nsslapd-accesslog-logexpirationtimeunit"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIMEUNIT_DIRECTIVE "errorlog-logexpirationtimeunit"
-#define CONFIG_ERRORLOG_LOGEXPIRATIONTIMEUNIT_ATTRIBUTE "nsslapd-errorlog-logexpirationtimeunit"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIMEUNIT_DIRECTIVE "auditlog-logexpirationtimeunit"
-#define CONFIG_AUDITLOG_LOGEXPIRATIONTIMEUNIT_ATTRIBUTE "nsslapd-auditlog-logexpirationtimeunit"
-#define CONFIG_ACCESSLOG_LOGGING_ENABLED_DIRECTIVE "accesslog-logging-enabled"
-#define CONFIG_ACCESSLOG_LOGGING_ENABLED_ATTRIBUTE "nsslapd-accesslog-logging-enabled"
-#define CONFIG_ERRORLOG_LOGGING_ENABLED_DIRECTIVE "errorlog-logging-enabled"
-#define CONFIG_ERRORLOG_LOGGING_ENABLED_ATTRIBUTE "nsslapd-errorlog-logging-enabled"
-#define CONFIG_AUDITLOG_LOGGING_ENABLED_DIRECTIVE "auditlog-logging-enabled"
-#define CONFIG_AUDITLOG_LOGGING_ENABLED_ATTRIBUTE "nsslapd-auditlog-logging-enabled"
-#define CONFIG_ROOTDN_DIRECTIVE "rootdn"
-#define CONFIG_ROOTDN_ATTRIBUTE "nsslapd-rootdn"
-#define CONFIG_ROOTPW_DIRECTIVE "rootpw"
-#define CONFIG_ROOTPW_ATTRIBUTE "nsslapd-rootpw"
-#define CONFIG_ROOTPWSTORAGESCHEME_DIRECTIVE "rootpwstoragescheme"
-#define CONFIG_ROOTPWSTORAGESCHEME_ATTRIBUTE "nsslapd-rootpwstoragescheme"
-#define CONFIG_UPDATEDN_DIRECTIVE "updatedn"
-#define CONFIG_UPDATEDN_ATTRIBUTE "nsslapd-updatedn"
-#define CONFIG_UPDATEPW_DIRECTIVE "updatepw"
-#define CONFIG_UPDATEPW_ATTRIBUTE "nsslapd-updatepw"
-#define CONFIG_UPDATESSLCLIENT_DIRECTIVE "updateSSLclient"
-#define CONFIG_UPDATESSLCLIENT_ATTRIBUTE "nsslapd-updateSSLclient"
-#define CONFIG_AUDITFILE_DIRECTIVE "auditfile"
-#define CONFIG_AUDITFILE_ATTRIBUTE "nsslapd-auditlog"
-#define CONFIG_LASTMOD_DIRECTIVE   "lastmod"
-#define CONFIG_LASTMOD_ATTRIBUTE   "nsslapd-lastmod"
-#define CONFIG_INCLUDE_DIRECTIVE   "include"
-#define CONFIG_INCLUDE_ATTRIBUTE   "nsslapd-include"
-#define CONFIG_DYNAMICCONF_DIRECTIVE "dynamicconf"
-#define CONFIG_DYNAMICCONF_ATTRIBUTE "nsslapd-dynamicconf"
-#define CONFIG_USEROC_DIRECTIVE "useroc"
-#define CONFIG_USEROC_ATTRIBUTE "nsslapd-useroc"
-#define CONFIG_USERAT_DIRECTIVE "userat"
-#define CONFIG_USERAT_ATTRIBUTE "nsslapd-userat"
-#define CONFIG_SVRTAB_DIRECTIVE "svrtab"
-#define CONFIG_SVRTAB_ATTRIBUTE "nsslapd-svrtab"
-#ifndef _WIN32
-#define CONFIG_LOCALUSER_DIRECTIVE "localuser"
-#define CONFIG_LOCALUSER_ATTRIBUTE "nsslapd-localuser"
-#endif /* !_WIN32 */
-#define CONFIG_LOCALHOST_DIRECTIVE "localhost"
-#define CONFIG_LOCALHOST_ATTRIBUTE "nsslapd-localhost"
-#define CONFIG_PORT_DIRECTIVE "port"
-#define CONFIG_PORT_ATTRIBUTE "nsslapd-port"
-#define CONFIG_LISTENHOST_DIRECTIVE "listenhost"
-#define CONFIG_LISTENHOST_ATTRIBUTE "nsslapd-listenhost"
-#define CONFIG_SECURITY_DIRECTIVE "security"
-#define CONFIG_SECURITY_ATTRIBUTE "nsslapd-security"
-#define CONFIG_SSL3CIPHERS_DIRECTIVE "SSL3ciphers"
-#define CONFIG_SSL3CIPHERS_ATTRIBUTE "nsslapd-SSL3ciphers"
-#define CONFIG_ACCESSLOG_DIRECTIVE "accesslog"
-#define CONFIG_ACCESSLOG_ATTRIBUTE "nsslapd-accesslog"
-#define CONFIG_ERRORLOG_DIRECTIVE "errorlog"
-#define CONFIG_ERRORLOG_ATTRIBUTE "nsslapd-errorlog"
-#define CONFIG_INSTANCEDIR_DIRECTIVE "instancedir"
-#define CONFIG_INSTANCEDIR_ATTRIBUTE "nsslapd-instancedir"
-#define CONFIG_SECUREPORT_DIRECTIVE "secure-port"
-#define CONFIG_SECUREPORT_ATTRIBUTE "nsslapd-securePort"
-#define CONFIG_SECURELISTENHOST_DIRECTIVE "secure-listenhost"
-#define CONFIG_SECURELISTENHOST_ATTRIBUTE "nsslapd-securelistenhost"
-#define CONFIG_THREADNUMBER_DIRECTIVE "threadnumber"
-#define CONFIG_THREADNUMBER_ATTRIBUTE "nsslapd-threadnumber"
-#define CONFIG_MAXTHREADSPERCONN_DIRECTIVE "maxthreadsperconn"
-#define CONFIG_MAXTHREADSPERCONN_ATTRIBUTE "nsslapd-maxthreadsperconn"
-#if !defined(_WIN32) && !defined(AIX)
-#define CONFIG_MAXDESCRIPTORS_DIRECTIVE "maxdescriptors"
-#define CONFIG_MAXDESCRIPTORS_ATTRIBUTE "nsslapd-maxdescriptors"
-#endif /* !_WIN32 && ! AIX */
-#define CONFIG_RESERVEDESCRIPTORS_DIRECTIVE "reservedescriptors"
-#define CONFIG_RESERVEDESCRIPTORS_ATTRIBUTE "nsslapd-reservedescriptors"
-#define CONFIG_IDLETIMEOUT_DIRECTIVE "idletimeout"
-#define CONFIG_IDLETIMEOUT_ATTRIBUTE "nsslapd-idletimeout"
-#define CONFIG_IOBLOCKTIMEOUT_DIRECTIVE "ioblocktimeout"
-#define CONFIG_IOBLOCKTIMEOUT_ATTRIBUTE "nsslapd-ioblocktimeout"
-#define CONFIG_NTSYNCH_DIRECTIVE "ntsynch"
-#define CONFIG_NTSYNCH_ATTRIBUTE "nsslapd-NTSynch"
-#define CONFIG_NTSYNCHUSESSL_DIRECTIVE "ntsynchusessl"
-#define CONFIG_NTSYNCHUSESSL_ATTRIBUTE "nsslapd-NTSynch-SSL"
-#define CONFIG_NTSYNCHPORT_DIRECTIVE "ntsynch-port"
-#define CONFIG_NTSYNCHPORT_ATTRIBUTE "nsslapd-NTSynch-port"
-#define CONFIG_ACCESSCONTROL_DIRECTIVE "accesscontrol"
-#define CONFIG_ACCESSCONTROL_ATTRIBUTE "nsslapd-accesscontrol"
-#define CONFIG_GROUPEVALNESTLEVEL_DIRECTIVE "groupevalnestlevel" 
-#define CONFIG_GROUPEVALNESTLEVEL_ATTRIBUTE "nsslapd-groupevalnestlevel"
-#define CONFIG_NAGLE_DIRECTIVE "nagle"
-#define CONFIG_NAGLE_ATTRIBUTE "nsslapd-nagle"
-#define CONFIG_PW_CHANGE_DIRECTIVE "pw_change"
-#define CONFIG_PW_CHANGE_ATTRIBUTE "passwordChange"
-#define CONFIG_PW_MUSTCHANGE_DIRECTIVE "pw_must_change"
-#define CONFIG_PW_MUSTCHANGE_ATTRIBUTE "passwordMustChange"
-#define CONFIG_PW_SYNTAX_DIRECTIVE "pw_syntax"
-#define CONFIG_PW_SYNTAX_ATTRIBUTE "passwordCheckSyntax"
-#define CONFIG_PW_MINLENGTH_DIRECTIVE "pw_minlength"
-#define CONFIG_PW_MINLENGTH_ATTRIBUTE "passwordMinLength"
-#define CONFIG_PW_EXP_DIRECTIVE "pw_exp"
-#define CONFIG_PW_EXP_ATTRIBUTE "passwordExp"
-#define CONFIG_PW_MAXAGE_DIRECTIVE "pw_maxage"
-#define CONFIG_PW_MAXAGE_ATTRIBUTE "passwordMaxAge"
-#define CONFIG_PW_MINAGE_DIRECTIVE "pw_minage"
-#define CONFIG_PW_MINAGE_ATTRIBUTE "passwordMinAge"
-#define CONFIG_PW_WARNING_DIRECTIVE "pw_warning"
-#define CONFIG_PW_WARNING_ATTRIBUTE "passwordWarning"
-#define CONFIG_PW_HISTORY_DIRECTIVE "pw_history"
-#define CONFIG_PW_HISTORY_ATTRIBUTE "passwordHistory"
-#define CONFIG_PW_INHISTORY_DIRECTIVE "pw_inhistory"
-#define CONFIG_PW_INHISTORY_ATTRIBUTE "passwordInHistory"
-#define CONFIG_PW_LOCKOUT_DIRECTIVE "pw_lockout"
-#define CONFIG_PW_LOCKOUT_ATTRIBUTE "passwordLockout"
-#define CONFIG_PW_STORAGESCHEME_DIRECTIVE "pw_storagescheme"
-#define CONFIG_PW_STORAGESCHEME_ATTRIBUTE "passwordStorageScheme"
-#define CONFIG_PW_MAXFAILURE_DIRECTIVE "pw_maxfailure"
-#define CONFIG_PW_MAXFAILURE_ATTRIBUTE "passwordMaxFailure"
-#define CONFIG_PW_UNLOCK_DIRECTIVE "pw_unlock"
-#define CONFIG_PW_UNLOCK_ATTRIBUTE "passwordUnlock"
-#define CONFIG_PW_LOCKDURATION_DIRECTIVE "pw_lockduration"
-#define CONFIG_PW_LOCKDURATION_ATTRIBUTE "passwordLockoutDuration"
-#define CONFIG_PW_RESETFAILURECOUNT_DIRECTIVE "pw_resetfailurecount"
-#define CONFIG_PW_RESETFAILURECOUNT_ATTRIBUTE "passwordResetFailureCount"
-#define CONFIG_ACCESSLOG_BUFFERING_DIRECTIVE "logbuffering"
-#define CONFIG_ACCESSLOG_BUFFERING_ATTRIBUTE "nsslapd-accesslog-logbuffering"
-#define CONFIG_CHANGELOG_DIR_DIRECTIVE        "changelogdir"
-#define CONFIG_CHANGELOG_DIR_ATTRIBUTE        "nsslapd-changelogdir"
-#define CONFIG_CHANGELOG_SUFFIX_DIRECTIVE     "changelogsuffix"
-#define CONFIG_CHANGELOG_SUFFIX_ATTRIBUTE     "nsslapd-changelogsuffix"
-#define CONFIG_CHANGELOG_MAXENTRIES_DIRECTIVE "changelogmaxextries"
-#define CONFIG_CHANGELOG_MAXENTRIES_ATTRIBUTE  "nsslapd-changelogmaxentries"
-#define CONFIG_CHANGELOG_MAXAGE_DIRECTIVE     "changelogmaxage"
-#define CONFIG_CHANGELOG_MAXAGE_ATTRIBUTE     "nsslapd-changelogmaxage"
-#define CONFIG_RETURN_EXACT_CASE_DIRECTIVE "return_exact_case"
-#define CONFIG_RESULT_TWEAK_DIRECTIVE "result_tweak"
-#define CONFIG_REFERRAL_MODE_DIRECTIVE		"referralmode"
-#define CONFIG_ATTRIBUTE_NAME_EXCEPTION_DIRECTIVE "attribute_name_exceptions"
-#define CONFIG_MAXBERSIZE_DIRECTIVE "maxbersize"
-#define CONFIG_VERSIONSTRING_DIRECTIVE "versionstring"
-#define CONFIG_ENQUOTE_SUP_OC_DIRECTIVE "enquote_sup_oc"
-#define CONFIG_ENQUOTE_SUP_OC_ATTRIBUTE "nsslapd-enquote_sup_oc"
-#define CONFIG_BASEDN_DIRECTIVE "certmap-basedn"
-#define CONFIG_BASEDN_ATTRIBUTE "nsslapd-certmap-basedn"
-
-%HashParametersName = ();
-
-# The following hash displays only general server parameters to migrate under cn=config
-%GeneralSrvParamToMigrate = (
-		       'accesscontrol'                   => 'nsslapd-accesscontrol',
-		       'errorlog-logging-enabled'        => 'nsslapd-errorlog-logging-enabled',
-		       'accesslog-logging-enabled'       => 'nsslapd-accesslog-logging-enabled',
-		       'auditlog-logging-enabled'        => 'nsslapd-auditlog-logging-enabled',
-		       'logbuffering'                    => 'nsslapd-accesslog-logbuffering',
-		       'accesslog-logexpirationtime'     => 'nsslapd-accesslog-logexpirationtime',
-		       'accesslog-logexpirationtimeunit' => 'nsslapd-accesslog-logexpirationtimeunit',
-		       'accesslog-maxlogdiskspace'       => 'nsslapd-accesslog-logmaxdiskspace',
-		       'accesslog-minfreediskspace'      => 'nsslapd-accesslog-logminfreediskspace',
-		       'accesslog-logrotationtime'       => 'nsslapd-accesslog-logrotationtime',
-		       'accesslog-logrotationtimeunit'   => 'nsslapd-accesslog-logrotationtimeunit',
-		       'accesslog-maxlogsize'            => 'nsslapd-accesslog-maxlogsize',
-		       'accesslog-maxnumoflogsperdir'    => 'nsslapd-accesslog-maxLogsPerDir',
-		       'auditlog-logexpirationtime'      => 'nsslapd-auditlog-logexpirationtime',
-		       'auditlog-logexpirationtimeunit'  => 'nsslapd-auditlog-logexpirationtimeunit',
-		       'auditlog-maxlogdiskspace'        => 'nsslapd-auditlog-logmaxdiskspace',
-		       'auditlog-minfreediskspace'       => 'nsslapd-auditlog-logminfreediskspace',
-		       'auditlog-logrotationtime'        => 'nsslapd-auditlog-logrotationtime',
-		       'auditlog-logrotationtimeunit'    => 'nsslapd-auditlog-logrotationtimeunit',
-		       'auditlog-maxlogsize'             => 'nsslapd-auditlog-maxlogsize',
-		       'auditlog-maxnumoflogsperdir'     => 'nsslapd-auditlog-maxLogsPerDir',
-		       'certmap-basedn'                  => 'nsslapd-certmap-basedn',
-		       'enquote_sup_oc'                  => 'nsslapd-enquote-sup-oc',
-		       'loglevel'                        => 'nsslapd-errorlog-level',
-		       'errorlog-logexpirationtime'      => 'nsslapd-errorlog-logexpirationtime',
-		       'errorlog-logexpirationtimeunit'  => 'nsslapd-errorlog-logexpirationtimeunit',
-		       'errorlog-maxlogdiskspace'        => 'nsslapd-errorlog-logmaxdiskspace',
-		       'errorlog-minfreediskspace'       => 'nsslapd-errorlog-logminfreediskspace',
-		       'errorlog-logrotationtime'        => 'nsslapd-errorlog-logrotationtime',
-		       'errorlog-logrotationtimeunit'    => 'nsslapd-errorlog-logrotationtimeunit',
-		       'errorlog-maxlogsize'             => 'nsslapd-errorlog-maxlogsize',
-		       'errorlog-maxnumoflogsperdir'     => 'nsslapd-errorlog-maxlogsperdir',
-		       'idletimeout'                     => 'nsslapd-idletimeout',
-		       'ioblocktimeout'                  => 'nsslapd-ioblocktimeout',
-		       'lastmod'                         => 'nsslapd-lastmod',
-		       'listenhost'                      => 'nsslapd-listenhost',
-		       'maxdescriptors'                  => 'nsslapd-maxdescriptors',
-		       'referral'                        => 'nsslapd-referral',
-		       'reservedescriptors'              => 'nsslapd-reservedescriptors',
-		       'rootpwstoragescheme'             => 'nsslapd-rootpwstoragescheme',
-		       'schemacheck'                     => 'nsslapd-schemacheck',
-		       'secure-port'                     => 'nsslapd-securePort',
-		       'security'                        => 'nsslapd-security',
-		       'sizelimit'                       => 'nsslapd-sizelimit',
-		       'SSL3ciphers'                     => 'nsslapd-SSL3ciphers',
-		       'timelimit'                       => 'nsslapd-timelimit',
-		       'pw_change'                       => 'passwordChange',
-		       'pw_syntax'                       => 'passwordCheckSyntax',
-		       'pw_exp'                          => 'passwordExp',
-		       'pw_history'                      => 'passwordHistory',
-		       'pw_inhistory'                    => 'passwordInHistory',
-		       'pw_lockout'                      => 'passwordLockout',
-		       'pw_lockduration'                 => 'passwordLockoutDuration',
-		       'pw_maxage'                       => 'passwordMaxAge',
-		       'pw_maxfailure'                   => 'passwordMaxFailure',
-		       'pw_minage'                       => 'passwordMinAge',
-		       'pw_minlength'                    => 'passwordMinLength',
-		       'pw_must_change'                  => 'passwordMustChange',
-		       'pw_resetfailurecount'            => 'passwordResetFailureCount',
-		       'pw_storagescheme'                => 'passwordStorageScheme',
-		       'pw_unlock'                       => 'passwordUnlock',
-		       'pw_warning'                      => 'passwordWarning'
-);
-
-# the following hash displays global parameters related to database stored under cn=config,cn=ldbm database,cn=plugins,cn=config
-%GlobalConfigLDBMparamToMigrate = (
-		       'allidsthreshold'                 => 'nsslapd-allidsthreshold',
-		       'lookthroughlimit'                => 'nsslapd-lookthroughlimit',
-		       'mode'                            => 'nsslapd-mode',
-		       'dbcachesize'                     => 'nsslapd-dbcachesize'
-);
-
-# the following hash displays specific parameters to each backends and  stored under cn=DBname,cn=ldbm database,cn=plugins,cn=config
-%LDBMparamToMigrate = (
-		       'cachesize'                       => 'nsslapd-cachesize',
-		       'readonly'                        => 'nsslapd-readonly'
-);
-
-%stdIncludes = (
-		"${oldConfDir}slapd.at.conf", "\n",
-		"${oldConfDir}slapd.oc.conf", "\n",
-		"${oldConfDir}java-object-schema.conf", "\n",
-		"${oldConfDir}ns-admin-schema.conf", "\n",
-		"${oldConfDir}ns-calendar-schema.conf", "\n",
-		"${oldConfDir}ns-certificate-schema.conf", "\n",
-		"${oldConfDir}ns-common-schema.conf", "\n",
-		"${oldConfDir}ns-compass-schema.conf", "\n",
-		"${oldConfDir}ns-delegated-admin-schema.conf", "\n",
-		"${oldConfDir}ns-directory-schema.conf", "\n",
-		"${oldConfDir}ns-legacy-schema.conf", "\n",
-		"${oldConfDir}ns-mail-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-browser-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-config-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-li-schema.conf", "\n",
-		"${oldConfDir}ns-mcd-mail-schema.conf", "\n",
-		"${oldConfDir}ns-media-schema.conf", "\n",
-		"${oldConfDir}ns-mlm-schema.conf", "\n",
-		"${oldConfDir}ns-msg-schema.conf", "\n",
-		"${oldConfDir}ns-netshare-schema.conf", "\n",
-		"${oldConfDir}ns-news-schema.conf", "\n",
-		"${oldConfDir}ns-proxy-schema.conf", "\n",
-		"${oldConfDir}ns-value-schema.conf", "\n",
-		"${oldConfDir}ns-wcal-schema.conf", "\n",
-		"${oldConfDir}ns-cos-schema.conf", "\n",
-		"${oldConfDir}ns-web-schema.conf", "\n"
-);
-
-%userDefinedConfigFiles = (
-		"slapd.conf", "\n",
-                "slapd.ldbm.conf", "\n",
-                "slapd.user_at.conf", "\n",
-                "slapd.user_oc.conf", "\n",
-                "ns-schema.conf", "\n"
-		     );
-
-$CIS_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.15" ;
-$TELEPHONE_SYNTAX_OID = "1.3.6.1.4.1.1466.115.121.1.50" ;
-$DN_SYNTAX_OID        = "1.3.6.1.4.1.1466.115.121.1.12" ;
-$CES_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.26" ;
-$INT_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.27" ;
-$BIN_SYNTAX_OID       = "1.3.6.1.4.1.1466.115.121.1.5"  ;
-
-%allowedPlugins  = (
-		    "cis", $CIS_SYNTAX_OID,
-		    "tel", $TELEPHONE_SYNTAX_OID,
-		    "dn",  $DN_SYNTAX_OID,
-		    "ces", $CES_SYNTAX_OID,
-		    "int", $INT_SYNTAX_OID,
-		    "bin", $BIN_SYNTAX_OID
-		    );
-
-%allowedModifiers = (
-		    "single", "SINGLE-VALUE"
-		    );
-# "override" is not supported anymore and "operational" cannot be used in user defined attribute.
-
-@oldSuffixes = () ; # array of old suffixes (with "o=netscaperoot" if presents)
-
-# link beetwen the name of the suffix and its associated DBname
-%DBNAMES  = () ; 
-%DBDirectory = () ;
-
-%oldhash  = () ; 
-
-# list of standard plugin's in version 4
-%stdPlugins = (
-	"7-bit check"                         =>        "\n",
-	"binary syntax"                       =>        "\n",     
-	"case exact string syntax"            =>        "\n",
-	"case ignore string syntax"           =>        "\n",
-	"distinguished name syntax"           =>        "\n",
-        "integer syntax"                      =>        "\n",
-        "internationalization plugin"         =>        "\n",
-        "referential integrity postoperation" =>        "\n",
-        "telephone syntax"                    =>        "\n",
-        "uid uniqueness"                      =>        "\n"
-        
-	      );
-
-# list of standard indexes configured out of the box in version 4
-%stdIndex = (
-	'aci',                   "\n",
-	'changenumber',          "\n",
-	'copiedfrom',            "\n",
-	'dncomp',                "\n",
-	'entrydn',               "\n",
-	'numsubordinates',       "\n",  
-	'objectclass',           "\n",
-	'parentid',              "\n"
-);
-
-# list of user added Plugin's. In the new version, they 'll need to be recompiled
-@badPlugins = () ;
-
-%newIndex = () ;
-
-%User_oc = () ;
-# push objectnames as they are encountered in config files.
-@User_oc_names = () ;
-
-%User_at = () ;
-
-
-
-#Usage parameters
-$USER_OC_FILE_MODIFIED = 0 ; # 0 if user don't want to modify LDIF objectclasses before processing, 1 else
-$USER_AT_FILE_MODIFIED = 0 ;
-$INDEX_FILE_MODIFIED = 0 ;
-
-# get the version of the DS to migrate
-($oldVersion, $oldMinor) = &getVersion($oldDir, $oldversionstr);
-# get the version of the new DS
-($Version, $Minor) = &getVersion($root);
-
-# get old LIB_PATH
-$old_libpath = &getLibPath($oldDir, $oldVersion, $oldMinor);
-# get new LIB_PATH
-$new_libpath = &getLibPath($root, $Version, $Minor);
-
-# Shutdown the legacy Directory instance
-printTrace("\nShutdown the legacy Directory Server instance: ${oldHome}",0);
-&stopServer($oldDir, 'slapd-'.$oldname);
-
-# compare configuration files with the standard ones
-CompareStdConfigFiles() ;
-die "\n\n The version of the product you want to migrate is not a 4.x Netscape Directory Server\n" unless ($oldVersion == 4) ;
-
-FillHashParametersName() ;
-
-###############  Connect to the New LDAP Directory Server  ######################
-$ENV{"$LIB_PATH"} = $new_libpath;
-my $LDAPservername = &getLDAPservername();
-die "\n Migration aborted. Make sure your Old and New Directory Servers are installed on the same machine \n" if ( $LDAPservername == -1 );
-$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Can't contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-
-# continue if the connection to new LDAP server is successful !
-printTrace("\nConnected to $Version.$Minor LDAP server\n",0) ;
-
-# get the uid and gid of the new slapd user
-($localuser, $newuid, $newgid)    = getuid_gid();
-# get the uid and gid of the old slapd user
-($oldlocaluser, $olduid, $oldgid) = getolduid_gid();
-
-# backup new configuration files in <new_root_server>/slapd-instancename/config
-printTrace("\nBackup $serverHome${PATHSEP}config on $serverHome${PATHSEP}config_backup ...",0);
-&backupConfigFiles();
-
-# Parse the main configuration file: slapd.conf
-printTrace("\nParse the configuration file: $oldSlapdConf...",0);
-ParseSlapdConf("< ${oldSlapdConf}");
-
-#migrate key/cert databases
-printTrace("\nMigrate key/cert databases...",0);
-&MigrateSSL(); 
-
-# Update parameters : general server parameters, global LDBM parameter, specific backend parameters
-printTrace("\nUpdate general server parameters...",0);
-$conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Can't contact the $Version.$Minor LDAP server: $LDAPservername\n"; 
-AddGeneralParameters();
-printTrace("\nUpdate global LDBM parameters...",0);
-AddGeneralLDBMParameters();
-printTrace("\nUpdate specific backend parameters...",0);
-AddSpecificLDBMParameters();
-
-##### FOR TESTING PURPOSE ONLY ########
-#
-#testIndexUpdating();
-#
-#######################################
-
-# Migrate some entries contained in the old dse.ldif, and migrate certmap.conf
-&MigrateDSE() ;
-&MigrateCertmap() ;
-
-# update new attribute definitions
-LDAPmodify_User_at();
-
-# update new object classes definitions
-LDAPmodify_User_oc();
-
-# add new indexes to each backends
-LDAPmodify_Indexes();
-
-# migrate Plug'ins parameters (enable attribute, and arguments)
-LDAPmodify_stdPlugin();
-
-##################   Close the connection to new LDAP Server   #####################
-$conn->close;
-
-
-################## stop the new instance and Export/Import the data, restart the server ##################
-if (%DBNAMES) {
-  &stopServer($root,'slapd-'.$newname);
-  if ($olddatadir) {
-	printTrace("\nold data directory $olddatadir...",0) ;
-	$ldif_rep = "$olddatadir${PATHSEP}";
-  } else {
-	printTrace("\ndata processing...",0) ;
-	# migrate data for each suffix: old -> LDIF files
-	&db2ldif($oldSlapdConf);
-  }
-  
-  # migrate LDIF data to the new database: LDIF -> new
-  &manyLdif2db();
-  &startServer();
-}
-else {
-  printTrace("\nThere no old non-standard suffixes to migrate",0);
-}
-
-printMsg("\n\n  ******   End of migration   ******\n\n");
-
-close(LOGFILE);
-
-
-###########################################################################################
-# get input users
-sub getParameters {
-  my $exit = 0 ;
-  my $i    = 0;
-  my $pwdfile= "";
-  while ($i <= $#ARGV) {
-    if ( "$ARGV[$i]" eq "-D" ) { # directory manager
-      if (! $rootDN) {
-	$rootDN = $ARGV[++$i] ;
-      }
-      else {
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-w") { # password
-      if (! $rootpwd) {
-	$rootpwd = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-j") { # password file 
-      if (! $pwdfile) {
-	$pwdfile = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-o") { # old instance path
-       if (! $oldHome ) {
-	 $oldHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $oldHome if $isNT ;
-	 if ($oldHome =~ /[\"]?(.*)?[\"]?/) { $oldHome = $1 ; }
-	 if ($oldHome =~ m@^(.*)/([^-/]*)-([^/]*)[/]?$@) {
-	   $oldDir  = $1 ;
-	   $type    = $2 ;
-	   $oldname = $3 ;
-	   if ($isNT) {
-	     $oldDir  = lc($oldDir)     ;
-	     $type    = lc($type)       ;
-	     $oldname = lc($oldname)    ;
-	     $oldHome = lc($oldHome)    ;
-	     grep { s@/@\\@g } $oldDir  ;
-	     grep { s@/@\\@g } $oldHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe old instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-n") { # new instance path
-       if (! $serverHome ) {
-	 $serverHome = $ARGV[++$i] ;
-	 grep { s@\\@/@g } $root if $isNT ;
-	 grep { s@\\@/@g } $serverHome if $isNT ;
-	 if ($serverHome =~ /[\"]?(.*)?[\"]?/) { $serverHome = $1 ; }
-	 if ($serverHome =~ m@^(.*?)/?([^/-]*)-([^/]*)[/]?$@) {
-	   $root    = $1 if ($1);
-	   $type    = $2 ;
-	   $newname = $3 ;
-	   if ($isNT) {
-	     $root       = lc($root)       ;
-	     $type       = lc($type)       ;
-	     $newname    = lc($newname)    ;
-	     $serverHome = lc($serverHome) ;
-	     grep { s@/@\\@g } $root       ;
-	     grep { s@/@\\@g } $serverHome ;
-	   }
-	 }
-	 else {
-	   print("\nThe new instance path is not correct. It must be like slapd-instancename");
-	   &usage();
-	   exit(1);
-	 }
-       }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-p") { # new DS port 
-      if (! $newport ) {
-	$newport = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-d") { # old instance LDIF data dir
-      if (! $olddatadir ) {
-	$olddatadir = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-v") { # old version
-      if (! $oldversionstr ) {
-	$oldversionstr = $ARGV[++$i] ;
-      }
-      else {	
-	&usage() ;
-	exit(1);
-      }
-    } elsif ("$ARGV[$i]" eq "-t") { # TRACELEVEL
-      my $value = $ARGV[++$i] ;	
-      if ($value =~ /[0-3]/) {
-	$TRACELEVEL = $value ;
-      }
-      else {
-	print("\nThe tracelevel must belong to 0..3 interval");
-        &usage();
-	exit();
-      }	
-    } elsif ("$ARGV[$i]" eq "-noinput") { # no user interventions during processing
-	$NO_INPUT_USER = 1 ;
-    } elsif ("$ARGV[$i]" eq "-L") { # migration logfile
-	$LogFileReport = $ARGV[++$i] ;
-    }
-    else {
-	print("\nThe option $ARGV[$i] is not recognized");
-	&usage() ;
-	exit(1);
-    }
-    $i++;
-  }
-  if (! $rootDN) {
-    print("\nThe rootDN is missing");
-    $exit = 1;
-  }
-  if ($pwdfile ne "") {
-    # Open file and get the password
-    unless (open (RPASS, $pwfile)) {
-      die "Error, cannot open password file $passwdfile\n";
-    }
-    $rootpwd = <RPASS>;
-    chomp($rootpwd);
-    close(RPASS);
-  } elsif ($rootpwd eq "-"){
-    # Read the password from terminal
-    die "The '-w -' option requires an extension library (Term::ReadKey) which is not\n",
-    "part of the standard perl distribution. If you want to use it, you must\n",
-    "download and install the module. You can find it at\n",
-    "http://www.perl.com/CPAN/CPAN.html\n";
-    # Remove the previous line and uncomment the following 6 lines once you have installed Term::ReadKey module.
-# use Term::ReadKey; 
-#	print "Bind Password: ";
-#	ReadMode('noecho'); 
-#	$rootpwd = ReadLine(0); 
-#	chomp($rootpwd);
-#	ReadMode('normal');
-  }
-  if (! $rootpwd) {
-    print("\nThe rootpwd is missing");
-    $exit = 1 ;
-  }
-  if (! $newport) {
-    print("\nThe port is missing");
-    $exit = 1;
-  }
-  if (! $serverHome) {
-    print("\nThe new instance path is missing");
-    $exit = 1;
-  }
-  if (! $oldHome) {
-    print("\nThe old instance path is missing");
-    $exit = 1;
-  }
-  if ((! $LogFileReport) && $serverHome) {
-    ($sec, $min, $hour, $dd, $mm, $yy) = &GetTime();
-    $LogFileReport  = "${serverHome}${PATHSEP}logs${PATHSEP}Migration_${dd}${mm}${yy}_${hour}${min}${sec}.log";
-  }
-
-  if ($exit) {	
-	&usage() ;
-	exit(1);
-  }
-  
-}
-
-
-###############################################################################
-# This subroutine is used to parse the slapd.conf configuration file and migrate specific parameters contained in it 
-
-
-sub ParseSlapdConf {
-    my	$oldsrc = shift;
-    my  $NumLine = 0 ;
-	# read the old conf file into a hash table
-    open( OLDSRC, $oldsrc ) || die "Can't open $oldsrc: $!: ";
-	LINE: while ( <OLDSRC> ) {
-	        $NumLine++ ;
-	        printTrace("\nLine: $_",4) ;
-		if (/^\s*\#/) { # skip comments
-		        printTrace("\n# ",4) ;
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-		        printTrace("\nBLANK LINE",4);
-			next LINE;
-		}  elsif (/^suffix\s+/i) {
-		        chomp($_) ;
-			CheckSuffix($_);
-		} elsif (/^plugin/i) {
-		        printTrace("\nPLUGIN",4);
-			chomp($_);
-			if (! &isAStandardPlugin($_)) {
-			   push @badPlugins, $_;
-			 }
-			else {
-			  my $Plugin = $_ ;
-			  if (! &ParsePlugin($_,$NumLine)) {
-			    printMsg("\nLine $NumLine, syntax error of the plugin:\n$Plugin");
-			   }
-			}
-		} elsif (/^include\s+[\"]?(.*?)[\"]?\s*$/i) {
-			# strip leading and trailing "
-			my $include_file = $1 ;
-		        grep { s@/@\\@g } $include_file if $isNT;
-			if (! &isAStandardInclude($include_file)) {
-			   printTrace("\nFILE: $1 NOT STANDARD",4) ;
-			   &ParseConfigurationFile($include_file);
-			   printTrace("\nEXIT ParseConfigurationFile: $include_file",4) ;
-			}
-		} elsif (/^userat\s+[\"]?(.*?)[\"]?\s*$/i) {
-		        printTrace("\nuserat: $1",4);
-			my $at_file = $1 ;
-		        grep { s@/@\\@g } $at_file if $isNT;
-		        # Parse user defined attributes
-		        &ParseAttributesFile($at_file);
-		} elsif (/^useroc\s+[\"]?(.*?)[\"]?\s*$/i) {
-		        printTrace("\nuseroc: $1",4);
-			my $oc_file = $1 ;
-		        grep { s@/@\\@g } $oc_file if $isNT;
-		        # Parse user defined object classes
-		        &ParseObjectClassesFile($oc_file);
-		} elsif (/^dynamicconf\s+[\"]?(.*?)[\"]?\s*$/i){
-		        printTrace("\ndynamicconf: $1",4);
-			my $dynamiconf_file = $1 ;
-		        grep { s@/@\\@g } $dynamiconf_file if $isNT;
-		        # Parse dynamic configuration file (e-g slapd.ldbm.conf)
-		        &ParseConfigurationFile($dynamiconf_file);
-		} elsif (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/) { 
-		        printTrace("\nParseParameters: $1",4);
-		        # Parse parameters and record the associated value in %oldhash
-		        &ParseParameters($1,$2,$NumLine);
-		} else {
-		        printTrace("\nUnknown format of configuration data: $_",0); }
-	}
-	close(OLDSRC);
-
-  }
-
-
-
-#############################################################################
-# return 1 if the suffix already exists, 0 else
-sub existSuffix {
-  my $suffixname = shift ;
-  my $nsuffix = normalizeDN($suffixname);
-  my $entry = $conn->search("cn=mapping tree,cn=config", "one", "(|(cn=\"$suffixname\")(cn=\"$nsuffix\"))");
-  return 1 if ($entry) ;
-  my $cpt = 5;
-  my $errorCode = $conn->getErrorCode();
-     while (($errorCode eq $LDAP_SERVER_UNREACHABLE) && $cpt && (! $entry)) {
-         printTrace("\ntry to reconnect to search cn=\"$suffixname\",cn=mapping tree,cn=config", 1);
-         $conn = new Mozilla::LDAP::Conn($LDAPservername,$newport,$rootDN,$rootpwd) or die "\n Unable to contact the $Version.$Minor LDAP server: $LDAPservername\n";
-         $entry = $conn->search("cn=mapping tree,cn=config", "one", "(|(cn=\"$suffixname\")(cn=\"$nsuffix\"))");
-         $errorCode = $conn->getErrorCode();
-         $cpt--;
-    }
-  return 1 if ($entry) ;
-  return 0 ;
-}
-
-# return the name of the backend if it has been successfully created, 0 else
-sub createBackend {
-  my $suffixname = shift ;
-  my $backend = "MigratedDB_0" ;
-  my $NbRetry = 1 ;
-  my $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-  while ($entry) {
-    # try to find another name for the backend
-    $backend = "MigratedDB_$NbRetry" ;
-    $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-    $NbRetry++;
-  }
-  # normally I should have a unique name for the backend
-  my $suffixarg = "nsslapd-suffix" ;
-  $entry = $conn->newEntry() ;
-  $entry->setDN("cn=$backend,cn=ldbm database,cn=plugins,cn=config");
-  $entry->setValues("objectclass", "top", "extensibleObject", "nsBackendInstance" );
-  $entry->setValues("cn", $backend );
-  $entry->setValues($suffixarg, $suffixname );
-  my $res = $conn->add($entry) ;
-  if ($res) {
-    return $backend ;
-  }
-  else {
-    return 0 ;
-  }
-}
-
-# return 1, if add the new entry in the mapping tree, else 0
-sub AddEntryInMappingTree {
-  my $backend = shift ;
-  my $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-  if ($entry) {
-    printTrace("\nAddEntry in progress ...",4) ;
-    my $suffixarg =  "nsslapd-suffix" ;
-    my $statearg  =  "nsslapd-state"  ;
-    my $backendarg=  "nsslapd-backend"; 
-    my $suffixname = $entry->{$suffixarg}[0];
-    $entry = $conn->newEntry() ;
-    $entry->setDN("cn=\"$suffixname\",cn=mapping tree,cn=config") ;
-    $entry->setValues("objectclass", "top", "extensibleObject", "nsMappingTree" );
-    $entry->setValues("cn", "\"$suffixname\"");
-    $entry->setValues($statearg, "backend");
-    $entry->setValues($backendarg, $backend);
-    return $conn->add($entry);
-  }
-  else {
-    printTrace("\nNo AddEntry processed for $backend",4);
-    return 0 ;
-  }
-}
-
-
-# Treat the case where the suffix is "o=NetscapeRoot"
-sub CheckSuffix {
-  my $suffix = shift ;
-  my $suffixname ;
-  my $expLdif;
-  my $confirm = "No";
-  my $dest = "$serverHome${PATHSEP}db_backup" ;  
-  my $newSlapdExecDir = "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server";
-
-  if (!(/^suffix\s+\"?(.*?)\"?\s*$/i)) {
-    printMsg("Syntax error of the suffix: $suffix");
-    return 0 ;
-  }
-  else {
-    $suffixname = $1 ;
-  }
-  if (/^suffix\s+\"?\s*o=netscaperoot\s*\"?\s*$/i) {
-    printTrace("\nFor the suffix o=NetscapeRoot, we do nothing",1);
-    # treat the case where the suffix is "o=NetscapeRoot"
-  }
-  else {
-    push @oldSuffixes, $_;
-    # check if the suffix already exists in the new DS target
-    if (! existSuffix($suffixname)) {
-      printTrace("\n\nSuffix $suffixname doesn't exist",1) ;
-      # create a new backend with the name of the suffix preceded by MigratedDB_
-      my $backend = createBackend($suffixname) ;
-      if ($backend) {
-	printTrace("\nBackend: $backend has been created !!!",1);
-	# if the creation of the backend is ok, we add a new entry in the mapping tree
-	if (AddEntryInMappingTree($backend)) {
-	  # We add the association dbname->suffix in the hash %DBNAMES
-	  $DBNAMES{$suffixname} = $backend ;
-	  # get the db filename
-	  $entry =  $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-	  my $dirarg = "nsslapd-directory";
-	  $DBDirectory{$backend} = $entry->{$dirarg}[0];
-	  printTrace("\nThe relation $backend->$suffixname has been added to the mapping tree",2);
-	}
-	else {
-	  printMsg("\nCOULD NOT ADD ENTRY: $backend->$suffixname IN MAPPINGTREE");
-	}
-      }
-      else {
-	  printMsg("\nCOULD NOT CREATE BACKEND: $backend");
-      }
-    }
-    else {
-      printMsg("\n\nSuffix: $suffixname already exists");
-      # the suffix already exists in the new DS
-      printMsg("\nMigration will overwrite existing database");
-      printMsg("\nDo you want to continue Yes/No [No] ?") ;
-      my $answer = <STDIN> ;
-      if ($answer =~ /y|yes/i) {
-          my $nsuffix = normalizeDN($suffixname);
-          my $my_entry = $conn->search("cn=mapping tree,cn=config", "one", "(|(cn=\"$suffixname\")(cn=\"$nsuffix\"))");
-          my $backend = $my_entry->{"nsslapd-backend"}[0];
-          my $backend_entry = $conn->search("cn=$backend,cn=ldbm database,cn=plugins,cn=config ", "base","objectclass=*") ;
-          printMsg("Do you want to export the existing data Yes/No [Yes] ?");
-          my $answer = <STDIN> ;
-          if (!($answer =~ /n|no/i)) {
-              mkdir $dest, 0700 unless (-d $dest);
-              $expLdif = "$dest${PATHSEP}$backend.ldif";
-              while (!($confirm =~ /y|yes/i)) {
-                  printMsg("\nEnter the full pathname of the file [$expLdif]:") ;
-                  $answer = <STDIN> ;
-                  chomp($expLdif = $answer) unless ($answer eq "\n");
-                  printMsg("\nExisting data will be exported under $expLdif");
-                  printMsg("\nContinue Yes/No [No] ?");
-                  $confirm = <STDIN>;
-              }
-              $ENV{"$LIB_PATH"}=$new_libpath;
-              chdir($newSlapdExecDir) or die "\nCould not change directory to $newSlapdExecDir: $!\n";
-              printTrace("\nNow backing up database $CN in $expLdif\n",0);
-              &stopServer($root,'slapd-'.$newname);
-              &newinst_db2ldif($expLdif, $suffixname, $serverHome);
-              &startServer();
-          }
-          # We add the association dbname->suffix in the hash %DBNAMES
-          $DBNAMES{$suffixname} = $backend ;
-          my $dirarg = "nsslapd-directory";
-          $DBDirectory{$backend} = $backend_entry->{$dirarg}[0];
-          printTrace("\nThe relation $backend->$suffixname has been added to the mapping tree",2);
-    }
-  }
-  return 1 ;
-}
-}
-
-#############################################################################
-# Usefull to know the standard configuration
-sub isAStandardPlugin {
-	my $line = shift;
-	chomp($line);
-	printTrace("\nStdPlugin?: $line",4);
-	if ($line =~ /^plugin\s+(database|extendop|preoperation|postoperation|matchingrule|syntax)\s+(on|off)\s+\"(.*?)\"\s+\"(.*?)\"\s+(\S+)(.*)$/i) {
-	  # $1 = <type>, $2 = <on|off>, $3 = <name>, $4 = <pathname>, $5 = <init_function>, $6 = [<arg>]*
-	  printTrace("\nName: $3, pathname: $4, init_function: $5",4);
-	  
-	  my $LC_line = lc($3);
-	  my $Value = $stdPlugins{$LC_line} ;
-	  if ($Value) {
-	     printTrace("\nIS A STANDARD PLUGIN",4);
-	  }
-	  else {
-	     printTrace("\nNOT A STANDARD PLUGIN",4);
-	  }
-	  return $stdPlugins{$LC_line} ;
-	}
-	else {
-	  printTrace("\nSYNTAX ERROR PLUGIN",4);
-	  return 0 ;
-	}
-}
-
-sub isAStandardIndex {
-	my $line = shift ;
-	chomp($line);
-	if ($line =~ /^index\s+(\S+).*/i) {
-	  my $LC_line = lc($1);
-	  my $Value = $stdIndex{$LC_line} ;
-	  printTrace("\nInclude: $LC_line \nValue: $Value", 4);
-	  return $stdIndex{$LC_line};
-	}
-	else {
-	  return 0 ;
-	}
-}
-
-
-sub isAStandardInclude {
-	my $line = shift;
-
-	chomp($line);
-	if ($isNT){
-	  return $stdIncludes{lc($line)}; 
-	}
-	else {
-   	  return $stdIncludes{$line} ;
-	}
-}
-
-#############################################################################
-# 
-# Execute a Perldap command to update plugins definition in the new schema 
-
-sub LDAPmodify_stdPlugin {
-  my $Filename = shift ;
-  my @pluginames = keys(%stdPlugins);
-  if (! $STDPLUGINS_FILE_MODIFIED) {
-    printTrace("\nLDAPmodify_plugin",4);
-    printTrace("\nMigrate plugin's...",1);
-    foreach $pluginame ( @pluginames ) {
-      my $update_plugin = 0 ;
-      my $ref_plugin = $stdPlugins{$pluginame};
-      if ($ref_plugin ne "\n") {
-	my $name       = $ref_plugin->name    ;
-	# We have a name change of "uid uniqueness plugin" in DS6.x
-	# to "attribute uniqueness"
-	$name = "attribute uniqueness" if ($name eq "uid uniqueness");
-	my $entry = $conn->search("cn=$name,cn=plugins,cn=config", "base","objectclass=nsSlapdPlugin") ;
-	if ($entry) {
-	  my $pluginenabled="nsslapd-pluginenabled" ;
-	  if (($entry->{$pluginenabled}[0]) ne $ref_plugin->enable) {
-	    $update_plugin = 1 ; 
-	    my $enable =  $ref_plugin->enable ;
-	    printTrace("\n$pluginame, plugin-enable: $enable",3) ;
-	    $entry->setValues($pluginenabled, $enable );
-	  }
-	  my $ArgNum = 0 ;
-	  foreach $ArgValue (@{$ref_plugin->args}) {
-	    my $Arg="nsslapd-pluginarg$ArgNum";
-	    printTrace("\n$Arg: $ArgValue",3) ;
-	    if ($entry->{$Arg}[0] ne $ArgValue) {
-	      printTrace("\n$pluginame, $Arg: $ArgValue",3) ;
-	      $update_plugin = 1 ; 
-	      $entry->setValues($Arg, $ArgValue) ;
-	    }
-	    $ArgNum++ ;
-	  }
-	  if ($update_plugin) {
-	    printTrace("\n$pluginame is being updated...",2);
-	    my $res = $conn->update($entry) ;
-	    if ($res) {
-	      printTrace("\nupdated !",2);
-	    }
-	    else {
-	      printMsg("\nError during update of plugin: $pluginame") ;
-	      $MigrationErrors .= "\nError during update of plugin: $pluginame";
-	    }
-	  }
-	  else {
-	    printTrace("\n$pluginame has not changed",4);
-	  }
-	}
-	else {
-	    printMsg("\ncan't access the plugin: cn=$name,cn=plugins,cn=config");
-	}
-      }
-      else {
-	printTrace("\nPLUGIN NOT RECORDED: $pluginame",4) ;
-      }
-     }
-    }
-    else {
-    # treat the case where the user wants to look at these plugins before processing
-  }
-}
-
-#############################################################################
-# Execute Perldap command to add new indexes to the migrated instances
-
-sub LDAPmodify_Indexes {   
-  my $Filename = shift ;
-  my @indexnames = keys(%newIndex);
-  my @suffixnames = keys(%DBNAMES);
-  if ((! $INDEX_FILE_MODIFIED) && (%DBNAMES)) {
-    # we update indexes only if there is at least one backend to migrate
-    printTrace("\nLDAPmodify_indexes",4);
-    printTrace("\nMigrate indexes...",1);
-    foreach $indexname ( @indexnames ) {
-      printTrace("\nIndexName: $indexname",4);
-      printTrace("\nIndexTypes: .@{$newIndex{$indexname}->types}.", 4) ;
-      printTrace("\nIndexOIDS: .@{$newIndex{$indexname}->oids}.", 4) ;
-      foreach $suffixname ( @suffixnames ) {
-	# check if the index already exists !
-	printTrace("\nsearch for cn=$indexname,cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config...", 3);
-	my $entry = $conn->search("cn=$indexname,cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config","base","objectclass=nsIndex");
-	if (! $entry) {
-	  # create a new index
-	  printTrace("index $indexname is being created under cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config...",2);
-	  my $entry = $conn->newEntry();
-	  $entry->setDN("cn=$indexname,cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config");
-	  $entry->setValues("objectclass",  "top", "nsIndex" ) ;
-	  $entry->setValues("cn", $indexname) ;
-	  $entry->setValues("nssystemindex", "false") ;
-          my @types = @{$newIndex{$indexname}->types} ;
-	  my @oids  = @{$newIndex{$indexname}->oids}  ;
-	  $entry->setValues("nsindextype", @types) if (@types) ; 
-	  $entry->setValues("nsmatchingrule", @oids ) if (@oids);
-	  my $res = $conn->add($entry) ;
-	  if ($res) {
-	    printTrace("\nAdd index successfully: $indexname for backend: $DBNAMES{$suffixname}",2);
-	  }
-	  else {
-	    printMsg("\n Failed to add the index: $indexname to backend: $DBNAMES{$suffixname}");
-	    $MigrationErrors .= "\n Failed to add the index: $indexname to backend: $DBNAMES{$suffixname}" ;
-	  }
-	}
-	elsif ($entry->{nssystemindex}[0] eq "false") {
-	  # if the index is not a system index, we update it
-	  printTrace("\nindex $indexname is being processed under cn=index,cn=$DBNAMES{$suffixname},cn=ldbm database,cn=plugins,cn=config...",2);
-          my @types          = @{$newIndex{$indexname}->types} ; printTrace("\ntypes: .@types.",2) ;
-	  my @oids           = @{$newIndex{$indexname}->oids}  ; printTrace("\noids: .@oids.",2) ;
-	  my @existing_types = $entry->getValues("nsindextype");
-	  my @existing_oids  = $entry->getValues("nsmatchingrule");
-	  # get the elements present in @types and not present in @existing_types
-	  my @typesToAdd     = &getDiff(\@types, \@existing_types);
-	  # same for matchingrules
-	  my @oidsToAdd      = &getDiff(\@oids, \@existing_oids);
-	  foreach $newtype (@typesToAdd) {
-	      $entry->addValue("nsindextype", $newtype); printTrace("\nnewtype: $newtype",2); 
-	  }
-	  foreach $newoid (@oidsToAdd) {
-	      $entry->addValue("nsmatchingrule", $newoid);  
-	  }
-	  if (@typesToAdd ||  @oidsToAdd) {
-	      my $res = $conn->update($entry) ;
-	      if ($res) {
-		  printTrace("\nUpdate index successfully: $indexname for backend: $DBNAMES{$suffixname}",2);
-	      }
-	      else {
-		  printMsg("\n Failed to update the index: $indexname to backend: $DBNAMES{$suffixname}");
-		  $MigrationErrors .= "\n Failed to update the index: $indexname to backend: $DBNAMES{$suffixname}" ;
-	      }
-	  }
-	  else {
-	      printTrace("\nNothing to update",2);
-	  }
-	}
-	else {
-	  printTrace("\nThe index: $indexname is a system index. It can't be updated",2);
-	}
-      }
-    }
-    
-  }
-  else {
-    # treat the case where the user wants to look at these indexes before processing
-  }
-        
-}
-
-#############################################################################
-# 
-# Execute a Perldap command to add all user defined object classes in the new schema 
-
-sub LDAPmodify_User_oc {
-  my $Filename = shift ;
-  if (! $USER_OC_FILE_MODIFIED) {
-    printTrace("\nLDAPmodify_User_oc",4);
-    printTrace("\nMigrate objectclasses...",1);
-    foreach $objectname ( @User_oc_names ) {
-      my $entry = $conn->search("cn=schema", "base","objectclass=*") ;
-      die "\ncan't connect to object: cn=schema\n" unless ($entry);
-      printTrace("\nObjectName: $objectname\nValue: $User_oc{$objectname}",3);
-      next if ($entry->hasValue("objectclasses",$User_oc{$objectname},1)) ;
-      $entry->addValue("objectclasses",$User_oc{$objectname},"1") ;
-      my $res = $conn->update($entry) ;
-      my $err = $conn->getErrorCode();
-      if ($res) { 
-	printTrace("\nobjectclass: $User_oc{$objectname} added",2);
-      } elsif ($err == 20) { # already exists
-	printTrace("\nobjectclass: $User_oc{$objectname} already exists",1);
-      } else {
-	printMsg("\nCan\'t add objectclass to the schema: $User_oc{$objectname}");
-	my $msg = $conn->getErrorString();
-	printMsg("\nMsg: $msg");
-	$MigrationErrors .= "\nCan\'t add objectclass to the schema: $User_oc{$objectname}" ;
-      }
-    }
-  }
-  else {
-    # treat the case where the user wants to look at these objectclasses before processing
-  }
-}
-
-#############################################################################
-# 
-# Execute a Perldap command to add all user defined attributes in the new schema 
-
-sub LDAPmodify_User_at {
-  my $Filename = shift ;
-  my @attributenames = keys(%User_at);
-  if (! $USER_AT_FILE_MODIFIED) {
-    
-    printTrace("\nLDAPmodify_User_at",4);
-    printTrace("\nMigrate attributes...",1);
-    foreach $attributename ( @attributenames ) {
-      my $entry = $conn->search("cn=schema", "base","objectclass=*") ;
-      printTrace("\nAtributeName: $attributename, Value: $User_at{$attributename}",3);
-	die "\nentry not found cn=schema\n" unless $entry ;
-      next if ($entry->hasValue("attributetypes",$User_at{$attributename},1) ) ;	
-      my $res = $entry->addValue("attributetypes",$User_at{$attributename},"1") ;
-      if (! $res) { 
-	printMsg("\nCan\'t add attribute to the schema: $User_at{$attributename}");
-	$MigrationErrors .= "\nCan\'t add attribute to the schema: $User_at{$attributename}" ;
-      }
-      my $res = $conn->update($entry) ;
-      my $err = $conn->getErrorCode();
-      if ($res) {
-	printTrace("\nattribute: $attributename added",2);
-      } elsif ($err == 20) { # already exists
-	printTrace("\nattribute: $attributename already exists",1);
-      }
-      else {
-	printMsg("\nCan\'t add attribute to the schema: $User_at{$attributename}");
-	my $msg = $conn->getErrorString();
-	printMsg("\nMsg: $msg");
-	$MigrationErrors .= "\nCan\'t add attribute to the schema: $User_at{$attributename}" ;
-      }
-    }
-  }
-  else {
-    # treat the case where the user wants to look at these attributes before processing
-  }
-}
-
-#############################################################################
-# Add an object class to the user_oc hash and reset the object !!!
-sub AddObjectClass {
-  my $ObjectClass     = shift ;
-  my $ObjectName      = $ObjectClass->{'ObjectName'} ;
-  my $Object_oid      = $ObjectClass->{'Object_oid'} ;
-  my $Object_superior = $ObjectClass->{'Object_superior'} ;
-  my $Object_requires = $ObjectClass->{'Object_requires'} ;
-  my $Object_allows   = $ObjectClass->{'Object_allows'} ;  
-  my $ObjectClassDef  = "( $Object_oid NAME \'$ObjectName\' DESC \'\' SUP $Object_superior STRUCTURAL MUST ($Object_requires) MAY ($Object_allows) X-ORIGIN \'user defined\' )";
-  if ( (!($ObjectName =~ /^top$/i)) && ( ! $User_oc{$ObjectName} )) {
-      $User_oc{$ObjectName} = $ObjectClassDef ;
-      push @User_oc_names, $ObjectName ;
-      printTrace("ObjectName: $ObjectName \nObject_oid: $Object_oid \nObject_superior:$Object_superior \nObject_requires: $Object_requires \nObject_allows: $Object_allows \nObjectClassDefinition: $User_oc{$ObjectName}\n",4);
-  }
-  elsif ( ($User_oc{$ObjectName}) && ($User_oc{$ObjectName} ne $ObjectClassDef) ) {
-      printMsg("\nAttempt to redifine the objectclass: $ObjectName previously defined in your configuration file. Operation not allowed  ");
-  }
-  else {
-      printMsg("\nAttempt to redifine the objectclass: top. Operation not allowed");
-  }
-  resetObjectClass($ObjectClass);
-}
-
-#############################################################################
-# Build an LDIF attribute and add it to the user_at hash
-sub AddAttribute {
-  my $Attr                  = shift ;
-  my $AttributeName         = $Attr->{'AttributeName'};
-  my $Attribute_oid         = $Attr->{'Attribute_oid'};
-  my $Attribute_aliases     = $Attr->{'Attribute_aliases'};
-  my $Attribute_syntax      = $Attr->{'Attribute_syntax'};
-  my $Attribute_single      = $Attr->{'Attribute_single'};
-  my $AttributeDef          = "( $Attribute_oid NAME ( \'$AttributeName\' $Attribute_aliases) DESC \'User Defined Attribute\' SYNTAX $Attribute_syntax $Attribute_single X-ORIGIN 'user defined' )" ;
-  printTrace("\nAttributeDef: $AttributeDef",4);
-  $User_at{$AttributeName} = $AttributeDef ;
-}
-#############################################################################
-# add the index structure to the newIndex hash
-sub AddIndex {
-  my $ref_index = shift ;
-  my $state     = shift ;
-  printTrace("\nAddIndex, last state: $state",4) ;
-  if ($state == 1) {
-    $ref_index->specific("ALL") ;
-    return 1 ;
-  }
-  elsif ($state == 6) {
-    $ref_index->specific("NONE") ;
-    return 1 ;
-  }
-  if (($state == 1) || ($state == 3) || ($state == 5) || ($state == 6)) {
-    foreach $name (@{$ref_index->names}) {
-      $newIndex{$name} = $ref_index ; # record the ref to the index struct in the newIndex hash
-    }
-    return 1 ;
-  }
-  else {
-    return 0 ; 
-  }
-}
-
-#############################################################################
-# add the plugin structure to the stdPlugin hash
-
-sub AddPlugin {
-  my $ref_plugin = shift ;
-  printTrace("\nAddPlugin",4) ;
-  $stdPlugins{lc($ref_plugin->name)} = $ref_plugin ;
-  my $name   = $ref_plugin->name    ;
-  my $type   = $ref_plugin->type    ;
-  my $enable = $ref_plugin->enable  ;
-
-  printTrace("\nPluginName: $name",4);
-  printTrace("\nPluginType: $type",4);
-  printTrace("\nPluginEnable: $enable",4);
-  printTrace("\nPluginArgs: @{$ref_plugin->args}",4);
-  return 1 ;
-}
-
-
-#############################################################################
-# parse a plugin definition and call the addindex
-
-sub ParsePlugin {
-  my $Plugin   = shift ;
-  my $NumLine  = shift ;
-  my $state = 0 ;
-  my $ErrorMsg = "Syntax error of a plugin definition. \n line parsed:";
-  my $ref_plugin = S_plugin->new();
-  printTrace("\nParsePlugin: $_",4);
-  if (/^plugin\s+(database|extendop|preoperation|postoperation|matchingrule|syntax)\s+(on|off)\s+\"(.*?)\"\s+\"(.*?)\"\s+(\S+)(.*)$/i) {
-    # $1 = <type>, $2 = <on|off>, $3 = <name>, $4 = <pathname>, $5 = <init_function>, $6 = [<arg>]*
-    $ref_plugin->name($3);
-    $ref_plugin->type($1);
-    $ref_plugin->enable($2);
-    $_ = $6 ;
-    my $ArgNb = 0 ;
-    my $prec ;
-    my $arg ;
-    my $Unix_oldDir = $oldDir ;
-    my $Unix_root   = $root ;
-    grep { s@\\@/@g } $Unix_oldDir if $isNT;
-    grep { s@\\@/@g } $Unix_root   if $isNT;
-    while (!(/^\s*$/)) {
-      if (/^\s*\".*?\"/) {
-        s/^\s*\"(.*?)\"(.*)/$2/i ;
-        $arg = $1 ;
-      }
-      elsif (/^\s*[^\"\s]+/) {
-        s/^\s*([^\"\s]+)(.*)/$2/i ;
-        $arg = $1 ;
-      }
-      $prec = $_ ;
-      $_ = $arg ;
-      
-      s@$Unix_oldDir@$Unix_root@ig ;
-      s/$type-$oldname/$type-$newname/ig ;
-      @{$ref_plugin->args}[$ArgNb++] = $_ ;
-      $_ = $prec ;
-    }
-    if (/^\s*$/) {
-      return AddPlugin($ref_plugin);
-    }
-    else {
-      return 0 ;
-    }
-  }
-  return 0 ;
-}
-
-#############################################################################
-# parse an index definition and call the addindex
-
-sub ParseIndex {		  
-  my $index   = shift ;
-  my $NumLine = shift ;
-  my $ref_index = S_index->new() ;
-  my $Value ;
-  my $state = 0 ;
-  my $ErrorMsg  = "Syntax error of an index definition.\nline parsed:";
-  printTrace("\nParseIndex: $_",4) ;
-  s/,/, /g ;
-  s/\s+,/,/g ;
-  s/^index\s+//i ; # substitute the token index
-  while (!(/^\s*$/)) {
-    s/^\s*(\S+)(.*)$/$2/ ;
-    $Value = $1 ;
-    printTrace("\nValue: $Value",4);
-    printTrace("\nState: $state",4) ;
-    SWITCH: {
-	if ($state == 0) {
-	  if ($Value =~ /[^\.]/) {
-	    if ($Value =~ /(\S+),$/) {
-	      push @{$ref_index->names}, $1 ;
-	    }
-	    else { 
-	      $state = 1 ;
-	      push @{$ref_index->names}, $Value ;
-	    }
-	  }
-	  else { 
-	    return 0 ;
-	  }
-	  last SWITCH ;
-	}
-	if ($state == 1) {
-	  if ($Value =~ /^none$/i) {
-	    $state = 6 ; # end of the index definition
-	  }
-	  elsif ($Value =~ /^\"\"$/) {
-	    $state = 4 ; # we expect to have at least one OID
-	  }
-	  elsif ($Value =~ /(\S+),$/) {
-	      $state = 2 ;
-	      push @{$ref_index->types}, $1 ;
-	    }
-	  else { 
-	      $state = 3 ;
-	      push @{$ref_index->types}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-	if ($state == 2) {
-	   if ($Value =~ /(\S+),$/) {
-	      push @{$ref_index->types}, $1 ;
-	    }
-	    else { 
-	      $state = 3 ;
-	      push @{$ref_index->types}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-	if ($state == 3) {
-	   if ($Value =~ /(\S+),$/) {
-	      $state = 4 ;
-	      push @{$ref_index->oids}, $1 ;
-	    }
-	    else { 
-	      $state = 5 ;
-	      push @{$ref_index->oids}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-	if ($state == 4) {
-	   if ($Value =~ /(\S+),$/) {
-	      push @{$ref_index->oids}, $1 ;
-	    }
-	    else { 
-	      $state = 5 ;
-	      push @{$ref_index->oids}, $Value ;
-	    }
-	  last SWITCH ;
-	}
-      }
-  }
-return AddIndex($ref_index,$state) ;
-  
-}
-
-#############################################################################
-
-sub ParseAttribute {
-
-
-        my $Attr      = shift ;
-	my $NumLine   = shift ;
-	my $state     = 1 ;
-	my $ErrorMsg  = "Syntax error of an attribute definition.\nline parsed:";
-	my %Attribute = (
-		       'AttributeName'         => "",
-		       'Attribute_oid'         => "",
-		       'Attribute_aliases'     => "",
-		       'Attribute_syntax'      => "",
-		       'Attribute_single'      => ""
-		      );
-	my $AttributeName = " ";
-	printTrace("\nParseAttribute",4);
-	while (!(/^\s*$/)) {
-	  s/^(.*?)(\S+)\s*$/$1/ ;
-	  printTrace("\nValue: $2",4);
-	  printTrace("\nState: $state",4) ;
-	  my $Value = $2 ;
-	  SWITCH: {
-	      if ($state == 1) { 
-		  if (isAllowedModifier($Value)) {
-		      $state               = 1 ;
-		      $modifier            = lc($Value);
-		      $AttrVar             = 'Attribute_' . $modifier ;
-		      $Attribute{$AttrVar} = &getModifierValue($Value) ;
-		  }
-		  elsif (&isAllowedPlugin($Value)) {
-		      $state                         = 2 ;
-		      $Attribute{'Attribute_syntax'} = &getSyntaxOid($Value) ;
-		  }
-		  else {
-		      return 0 ;
-		  }
-		  last SWITCH ;
-	      }
-	      if ($state == 2) {
-		if ($Value =~ /[\.]|-oid$/)  {
-		  $Attribute{'Attribute_oid'} = "$Value" ;
-		  printTrace("\nAttribute-oid: $Attribute{'Attribute_oid'}",3);
-		  $state = 3 ;
-		}
-		elsif ($Value =~ /[^\.]/) {
-		  $AttributeName = $Attribute{'AttributeName'} ;
-		  if ($AttributeName) { $Attribute{'Attribute_aliases'} .= "\'$AttributeName\' " ;}
-		  $Attribute{'AttributeName'} = $Value ;
-		  $state = 4 ;
-		}
-		else {
-		  return 0 ;
-		}
-		last SWITCH ;
-	      }
-	      if ($state == 3) {
-		if ($Value =~ /[^\.]/) {
-		  $AttributeName = $Attribute{'AttributeName'} ;
-		  if ($AttributeName) { $Attribute{'Attribute_aliases'} .= "\'$AttributeName\' " ;}
-		  $Attribute{'AttributeName'} = $Value ;
-		  $state = 4 ; }
-		else {
-		  return 0 ;
-		}
-		last SWITCH ;
-		  }
-	      if ($state == 4) {
-		if ($Value =~/^attribute$/i){
-		  $state = 5;
-		}
-		elsif ($Value =~/[^\.]/i) {
-		  $AttributeName = $Attribute{'AttributeName'} ;
-		  if ($AttributeName) {  $Attribute{'Attribute_aliases'} .= "\'$AttributeName\' " ;}
-		  $Attribute{'AttributeName'} = $Value ;
-		}
-		else {
-		  return 0 ;
-		}
-		last SWITCH ;
-	      }
-	      if ($state == 5) {
-		return 0 ;
-		last SWITCH ;
-	      }
-	    } 
-	}
-	$Attribute{'Attribute_oid'} = $Attribute{'AttributeName'} . '-oid' unless ($Attribute{'Attribute_oid'}) ;
-	return AddAttribute(\%Attribute) ;
-}
-
-
-#############################################################################
-# fill in the hash HashParametersName
-
-sub FillHashParametersName {
-  my @paramnames = ( keys(%GeneralSrvParamToMigrate), keys(%GlobalConfigLDBMparamToMigrate), keys(%LDBMparamToMigrate));
-  foreach $param (@paramnames) {
-    $HashParametersName{$param} = '\n';
-  }
-}
-
-
-# Parse parameters
-sub ParseParameters {
-  my $param    = shift ;
-  my $value    = shift ;
-  my $NumLine  = shift ;
-  my $ErrorMsg = "parameter unknown, or not to be migrated: ";
-  if ($HashParametersName{lc($param)} && ($value !~ /^\s*$/)) {
-    $HashParametersName{lc($param)} = $value ;
-    printTrace("\nParam: $param is present",4);
-  }
-  else { 
-    printTrace("\n$NumLine, $ErrorMsg,$param",4); 
-  }
-  
-}
-
-# add general server parameters 
-sub AddGeneralParameters {
-  my @paramnames = keys(%GeneralSrvParamToMigrate);
-  my $entry      = $conn->search("cn=config","base","objectclass=*");
-  die "\ncan't access to object: cn=config. \nMigration stopped\n" unless ($entry);
-  printTrace("\nAddGeneralParameters",4);
-  foreach $param (@paramnames) {
-      my $LDAPparam =  $GeneralSrvParamToMigrate{$param} ;
-      my $Value     = $HashParametersName{$param} ;
-      if (($Value ne '\n') && ($entry->{$LDAPparam}[0] ne $Value)) { 
-	  printTrace("\nLDAPparam: $LDAPparam, Value: $Value",4);
-	  $entry->setValues($LDAPparam, $Value);
-	  my $res = $conn->update($entry);
-	  if ($res) {
-	      printTrace("\nUpdate successfully $LDAPparam ",0);
-	  }
-	  else {
-	      printMsg("\nCan't update parameter: $LDAPparam");
-	  }
-      }
-  }
-}
-
-
-# add general LDBM parameters
-sub AddGeneralLDBMParameters {
-  my @paramnames = keys(%GlobalConfigLDBMparamToMigrate);
-  my $entry      = $conn->search("cn=config,cn=ldbm database,cn=plugins,cn=config","base","objectclass=*");
-  die "\ncan't access to object: cn=config,cn=ldbm database,cn=plugins,cn=config. \nMigration stopped\n" unless ($entry);
-  printTrace("\nAddGeneralLDBMParameters",4);
-  foreach $param (@paramnames) {
-    my $LDAPparam = $GlobalConfigLDBMparamToMigrate{$param} ;
-    my $Value     = $HashParametersName{$param} ;
-    if (($Value ne '\n') && ($entry->{$LDAPparam}[0] ne $Value)) { 
-      printTrace("\nLDAPparam: $LDAPparam, Value: $Value",4);
-      $entry->setValues($LDAPparam, $Value);
-      my $res = $conn->update($entry);
-      if ($res) {
-	  printTrace("\nUpdate successfully $LDAPparam ",0);
-      }
-      else {
-	  printMsg("\nCan't update parameter: $LDAPparam");
-      }
-    }
-  }
-}
-
-# add specific LDBM parameters
-sub AddSpecificLDBMParameters {
-  my @paramnames = keys(%LDBMparamToMigrate);
-  my %REV_DBNAMES = reverse %DBNAMES ;
-  my @dbnames = keys(%REV_DBNAMES);
-  printTrace("\nAddSpecificLDBMParameters",4);
-  foreach $dbname (@dbnames) {
-    my $entry = $conn->search("cn=$dbname,cn=ldbm database,cn=plugins,cn=config","base","objectclass=*");
-    die "\ncan't access to object: cn=$dbname,cn=ldbm database,cn=plugins,cn=config. \nMigration stopped\n" unless ($entry);
-    foreach $param (@paramnames) {
-      my $LDAPparam = $LDBMparamToMigrate{$param} ;
-      my $Value     = $HashParametersName{$param} ;
-      if (($Value ne '\n') && ($entry->{$LDAPparam}[0] ne $Value)) { 
-	printTrace("\nLDAPparam: $LDAPparam, Value: $Value",4);
-        $entry->setValues($LDAPparam, $Value);
-	my $res = $conn->update($entry);
-	if ($res) {
-	    printTrace("\nUpdate successfully $LDAPparam",2);
-	}
-	else {
-	    printMsg("\nCan't update parameter: $LDAPparam");
-	}
-      }
-    }
-  }
-}
-
-#############################################################################
-# Parse a configuration file potentialy tuned by the user (different from slapd.user_oc.conf and slapd.user_at.conf)
-
-sub ParseConfigurationFile {
-
-      my $FileToParse = shift;
-      my $NumLine = 0;
-      my $PARSE_OBJECTCLASSES = 0 ; # 1 if there are objectclass definitions in the file 
-      printTrace("\nParseConfigurationFile: $FileToParse",4) ;
-      printTrace("\nParse $FileToParse",2);
-      # read each line of the configuration file
-      my $CONFIGFILE = "CONFIGFILE.$FileToParse" ;
-      open( $CONFIGFILE, $FileToParse ) || die "Can't open $FileToParsec: $!: ";
-	LINE: while ( <$CONFIGFILE> ) {
-	        $NumLine++ ;
-		if (/^\s*\#/) { # skip comments
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-			next LINE;
-		} elsif (/^suffix\s+/i) {
-		        chomp($_) ;
-			CheckSuffix($_) ;
-		} elsif (/^plugin/i) {
-			chomp($_);
-			if (! &isAStandardPlugin($_)) {
-			   push @badPlugins, $_; 
-			}
-			else {
-			  my $Plugin = $_ ;
-			  if (! &ParsePlugin($_,$NumLine)) {
-			    printMsg("\nLine $NumLine, syntax error of the plugin:\n$Plugin");
-			   }
-			}
-		} elsif (/^index/i) {
-			chomp($_);
-			if (! &isAStandardIndex($_)) {
-			  my $Index = $_ ;
-			  if (! &ParseIndex($_,$NumLine)) {
-			    printMsg("\nLine $NumLine, syntax error of index:\n$Index");
-			  }
-			}
-		} elsif (/^include\s+[\"]?(.*?)[\"]?\s*$/i) {
-			# strip leading and trailing "
-			my $include_file = $1 ;
-		        grep { s@/@\\@g } $include_file if $isNT;
-			if (! &isAStandardInclude($include_file)) {
-			   &ParseConfigurationFile($include_file);
-			}	
-		} elsif (/^attribute\s+\S+/i) {
-		        chomp($_);
-			my $Attrib = $_ ;
-			if (! &ParseAttribute($_,$NumLine)) {
-			  printMsg("\nLine $NumLine, syntax error of attribute:\n$Attrib");
-			}
-		} elsif (/^objectclass\s+(\S+)\s*$/i) {
-		        # At least one objectclass is present in the file
-		        $PARSE_OBJECTCLASSES = 1;
-		} elsif (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/) { 
-		        # Parse parameters and record the associated value in %Oldhash
-		        &ParseParameters($1,$2,$NumLine);
-		}
-	}
-	close($CONFIGFILE);
-        ParseObjectClassesFile($FileToParse) if ($PARSE_OBJECTCLASSES); # parse objectclass definition
-
-}
-
-#############################################################################
-# Parse the file specified in the userat attribute
-
-sub ParseAttributesFile {
-    my $userat_file=shift ;
-    my $NumLine = 0;
-    printTrace("\nParseAttributesFile: $userat_file",4);
-    printTrace("\nParse user defined attributes file: $userat_file",2);
-    # read each line of the configuration file
-    open( ATTRFILE, $userat_file ) || die "Can't open $FileToParsec: $!: ";
-	LINE: while ( <ATTRFILE> ) {
-	        $NumLine++ ;
-		if (/^\s*\#/) { # skip comments
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-			next LINE;
-		} elsif (/^attribute\s+\S+/i) {
-			chomp($_);
-			my $Attrib = $_ ;
-			if (! &ParseAttribute($_, $NumLine)) {
-			  printMsg("\nLine $NumLine, syntax error of attribute:\n$Attrib");
-			}
-		}
-	}
-	close(ATTRFILE);
-}
-
-#############################################################################
-# Parse the file specified in the useroc token
-
-sub ParseObjectClassesFile {
-    my $useroc_file = shift ;
-    my %ObjectClass = (
-		       'ObjectName'      => " ",
-		       'Object_oid'      => " ",
-		       'Object_superior' => "top",
-		       'Object_requires' => " ",
-		       'Object_allows'   => " "
-		      );
-
-    my $state    = 0;
-    my $ErrorMsg = "Syntax error of an object class definition.\nline parsed:";
-    my $LineNb   = 0 ; # Number of the current line parsed in the file
-    printTrace("ParseObjectClassesFile: $useroc_file\n",4) ;
-    # read each line of the configuration file
-    open( OBJCLASSFILE, $useroc_file ) || die "Can't open $FileToParsec: $!: ";
-    printTrace("Begin the parsing of the file: $useroc_file",4);
-	LINE: while ( <OBJCLASSFILE> ) {
-	        printTrace("Current Line: $_",4);
-	        $LineNb++ ;
-		if (/^\s*\#/) { # skip comments
-			next LINE;
-		}
-		if (/^\s*$/) { # skip blank lines
-			next LINE;
-		}
-	      SWITCH: {
-		  if ($state == 0) {  resetObjectClass(\%ObjectClass);
-		                      if (/^objectclass\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'ObjectName'} = $1;
-				      $state = 1 ;}
-				    else {} # printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		  if ($state == 1) {if (/^\s+oid\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'Object_oid'} = $1;
-				      $state = 2 ;}
-				    elsif (/^\s+superior\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'Object_superior'} = $1;
-				      $state = 3 ;
-				    }
-				    elsif (/^\s+requires\s*$/i) {
-				      $state = 4;
-				    }
-				    elsif (/^\s+allows\s*$/i) {
-				      $state = 5;
-				    }
-				    else {$state=0; printMsg($ErrorMsg,$_,$LineNb);}
-		                    last SWITCH;}
-		  if ($state == 2) {if (/^\s+superior\s+(\S+)\s*$/i) {
-		                      $ObjectClass{'Object_superior'} = $1;
-				      $state = 3 ;}
-				    elsif (/^\s+requires\s*$/i) {
-				      $state = 4;
-				    }
-				    elsif (/^\s+allows\s*$/i) {
-				      $state = 5;
-				    }
-				    else { $state=0; printMsg($ErrorMsg,$_,$LineNb);}
-		                    last SWITCH;}
-		  if ($state == 3) {if (/^\s+requires\s*$/i)
-					{ $state = 4; }
-				    elsif (/^objectclass\s+(\S+)\s*$/i) {
-				      # run an ldap add before to continue
-				      &AddObjectClass(\%ObjectClass);
-				      $ObjectClass{'ObjectName'} = $1;
-				      $state = 1 ;}
-				    elsif (/^\s+allows\s*$/i)
-					{ $state = 5; }
-				    else {$state = 0; printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		  if ($state == 4) {if (/^\s+([^,\s]+),\s*$/i) {
-		                        $ObjectClass{'Object_requires'}.=$1." \$ "; }
-				    elsif (/^\s+([^,\s]+)\s*$/i) {
-                                        $ObjectClass{'Object_requires'}.=$1." ";
-				        $state = 6; }
-				    else {$state = 0;printMsg($ErrorMsg,$_,$LineNb);}
-		                    last SWITCH;}
-		  if ($state == 5) {if (/^\s+([^,\s]+),\s*$/i) {
-		                        $ObjectClass{'Object_allows'}.=$1." \$ "; }
-				    elsif (/^\s+([^,\s]+)\s*$/i) {
-                                        $ObjectClass{'Object_allows'}.=$1." ";
-					# run an ldap add before to continue
-				        &AddObjectClass(\%ObjectClass);
-				        $state = 0; }
-				    else {$state = 0; printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		  if ($state == 6) {if (/^objectclass\s+(\S+)\s*$/i) {
-				      # run an ldap add before to continue
-				      &AddObjectClass(\%ObjectClass);
-				      $ObjectClass{'ObjectName'} = $1;
-				      $state = 1 ;}
-				    elsif (/^\s+allows\s*$/i) {
-				      $state = 5;}
-				    else {$state = 0; printMsg($ErrorMsg,$_,$LineNb);}
-				    last SWITCH;}
-		}
-	}
-	close(OBJCLASSFILE);
-    if (($state == 3) || ($state == 4) || ($state == 5) || ($state == 6)) {
-      &AddObjectClass(\%ObjectClass);
-    }
-    printTrace("state: $state",4);
-}
-
-#############################################################################
-# printMsg print message to the user standard output.  
-
-sub printMsg {
-
-  my $TypeMsg = shift ;
-  my $Msg     = shift ;
-  my $LineNb  = shift ;
-  if ($LineNb) {
-    printTrace("Line: $LineNb, $TypeMsg, $Msg");
-  }
-  else {
-    printTrace("$TypeMsg $Msg");
-  }
-}
-
-#############################################################################
-#  print message error to the user standard output.  
-
-sub printTrace {
-
-  my $Msg     = shift ;
-  my $level   = shift ;
-  if ($level <= $TRACELEVEL) {
-    print($Msg);    
-    print LOGFILE $Msg ;
-  }
-}  
-
-#############################################################################
-# reset an objectclass structure
-
-sub resetObjectClass {
-  my $ObjectClass = shift;
-  $ObjectClass->{'ObjectName'}      = " " ;
-  $ObjectClass->{'Object_oid'}      = " " ;
-  $ObjectClass->{'Object_superior'} = "top" ;
-  $ObjectClass->{'Object_requires'} = " " ;
-  $ObjectClass->{'Object_allows'}   = " " ;	  
-}
-
-#############################################################################
-# this subroutine implements a very stupid version of diff
-
-sub diff {
-	my $f1              = shift;
-	my $f2              = shift;
-	my $lineToBeginWith = shift;
-	my $NULL            = "" ;
-	my $diff_f1         = $NULL ;
-	my $diff_f2         = $NULL ;
-	my $retval          = $NULL ;
-	my $ret;
-	open(F1, "$f1") or die "Could not open file $f1";
-	open(F2, "$f2") or close(F1), die "Could not open file $f2";
-
-	while (defined($l1 = <F1>)) {
-	    if ($lineToBeginWith){
-		$lineToBeginWith -- ;
-		next ;
-	    }
-	    next if ($l1 =~ /^\#/);
-	    $ret = defined($l2 = <F2>);
-	    if ($ret) {
-		$ret = defined($l2 = <F2>) while ($ret && ($l2 =~ /^\#/)) ;
-		if ($ret) {
-		    if (!($l1 eq $l2)) {
-			
-			# ignore whitespace
-			$l1_clean = $l1 ;
-			$l2_clean = $l2 ;
-			$l1_clean =~ s/\s//g;
-			$l2_clean =~ s/\s//g;
-						  
-			if (!($l1_clean eq $l2_clean)) {
-			    $diff_f1 .= "${l1}" unless ($l1_clean eq $NULL);
-			    $diff_f2 .= "${l2}" unless ($l2_clean eq $NULL);
-			}
-		    }
-		}
-		else {
-		   next if ($l1 =~ /^\s*$/) ;
-		   $diff_f1 .= "${l1}";
-		}
-	    }
-	    else {
-		next if ($l1 =~ /^\s*$/) ;
-		$diff_f1 .= "${l1}";
-	    }
-	}
-	
-	while (defined($l2 = <F2>)) {
-	    	if (($l2 =~ /^\#/) || ($l2 =~ /^\s*$/)) { 
-		    next ;
-		}
-		else {
-		    $diff_f2 .= "${l2}" ;
-		}
-	}
-
-	close(F1);
-	close(F2);
-
-	$retval .= "- differences present in your config file but not in standard file:\n\n". "$diff_f1\n" if ($diff_f1) ;
-	$retval .= "- differences present in standard file but not in your config file:\n\n" . "$diff_f2"  if ($diff_f2) ;
-	return $retval ;
-}
-
-sub CompareStdConfigFiles {
-  # Compare each configuration file against its default version.  If it has changed,
-  # notify the user that the file has changed and will need to be checked by the
-  # user.  This should be safe to do because there should be no path information
-  # stored in these conf files, which are just schema stuff.
-  # printTrace("\nCheck if standard configuration files have changed",3);
-
-  my $origFilePath = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}install${PATHSEP}config${PATHSEP}" ;
-  my $FilesChanged = "";
-  my $AllDiffs     = "***********************************************************************";
-  my $NoChanges    = "" ;
-  my $lineToBegin  = 0 ;
-  printTrace("\nVersion of the old directory server: $oldVersion.$oldMinor",0);
-  opendir(CONFDIR, $oldConfDir) or
-    die "Error: could not open migrated config dir $oldConfDir: $!";
-  
-  foreach $file (readdir(CONFDIR)) {
-       $origFile   = $origFilePath . $file ;
-       $configFile = $oldConfDir . $file ;
-      if ((! exists($userDefinedConfigFiles{lc($file)})) && (-f $origFile)) {
-	  my $lineToBegin = 1 if (lc($file) eq "slapd-collations.conf"); # we ignore the first line of slapd-collations 
-	  $diffs = &diff($configFile, $origFile, $lineToBegin);
-	  $lineToBegin = 0 if $lineToBegin ;
-	  if ($diffs) {
-	      $FilesChanged .= "\n$configFile";
-	      $AllDiffs     .= "\n$configFile  is different than the standard configuration file" ;
-	      $AllDiffs     .= "\nYou will need to check this file and make sure its changes are compatible ";
-	      $AllDiffs     .= "with the new directory server\nHere are the differences:\n";
-	      $AllDiffs     .= "$diffs \n\n";
-	      $AllDiffs     .= "***********************************************************************";
-	  } 
-	  else {
-  	      $NoChanges .= "\n$configFile";
-	  }
-      }
-   }
-  closedir(CONFDIR);
-
-if ($FilesChanged) {
-    printTrace("\nNo changes to old configuration files:$NoChanges",3) ;
-    printTrace("\n***********************************************************************",3) ;
-    printMsg("\nThe following standard files have been modified: $FilesChanged");
-    if ($NO_INPUT_USER) {
-	# do nothing
-    }
-    else {
-	printMsg("\nDo you want to see the differences Yes/No [No] ?") ;
-	my $answer = <STDIN> ;
-	if ($answer =~ /y|yes/i) {
-	    printMsg("$AllDiffs");
-	}
-	printMsg("\nDo you want to continue the migration Yes/No [No] ?");
-	$answer = <STDIN> ;
-	if (! ($answer =~ /y|yes/i)) {
-	    exit(1);
-	}
-    }
-  }
-}
-
-
-#############################################################################
-
-sub db2ldif {
-  my  ($conf, $ldif_dir) = @_;
-  $ENV{"$LIB_PATH"}=$old_libpath;
-  if (!$conf) {
-    $conf = "$oldHome${PATHSEP}config${PATHSEP}slapd.conf";
-  }
-  if (! $ldif_dir) { $ldif_dir = $ldif_rep ;}
-  if  (!(-d $ldif_dir)) {
-    mkdir($ldif_dir,0777) or die "can't create $ldif_rep to store temporary ldif files";
-  }
-  my $dir = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server";
-  chdir($dir) or
-    die "Error: could not change directory to $dir: $!";
-  my @suffixnames = keys(%DBNAMES) ;
-  foreach $suffixname (@suffixnames) {
-    my $ldif_file = $ldif_dir.$DBNAMES{$suffixname}.".ldif" ;
-    # If we are on NT, ${quote} is setup to "\"", else it's setup to ""
-    # As the suffix can contain some space characters, I write the suffix parameter: "\"$suffixname\"" rather than "${quote}$suffixname${quote}"
-    my @cmd =
-      ( "${quote}$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
-	"${PATHSEP}$slapdExecName${quote}", "db2ldif", '-n', '-f',
-	"${quote}$conf${quote}", '-a', "${quote}$ldif_file${quote}",
-	'-d', '1','-s',"\"$suffixname\"" );
-    open(DB2LDIF, "${quote}@cmd${quote} 2>&1|") or
-      die "Error: could not execute @cmd: $!";
-    sleep(1);			# allow pipe to fill with data
-    $ii = 0;			# counter
-    while (<DB2LDIF>) {
-      ++$ii;
-      if (($ii % 250) == 0) {
-	printMsg("  Processing...\n");
-      }
-    }
-    close(DB2LDIF);
-    # set the ownership of the ldif file; should be the same as the new slapd user id
-    if ((! $isNt) && ($oldlocaluser ne $localuser)) {
-	if (-f $ldif_file) {
-	    chown( $newuid, $newgid, $ldif_file) or printMsg("\nUnable to change the ownership of $ldif_file to $localuser") ;
-	}
-    }
-  }
-  print "  Done.\n";
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";
-}
-
-#############################################################################
-# This db2ldif is used to export database of the new instance
-
-sub newinst_db2ldif {
-  my $ldif            = shift ;
-  my $include_suffix  = shift ;
-  my $home            = shift ;
-  my $db2ldif_param   = "db2ldif -r -D $home -a $ldif -s \"$include_suffix\"";
-
-  open(DB2LDIF, "${quote}${quote}$slapdExecName${quote} $db2ldif_param${quote} 2>&1 |") or die "Could not run ns-slapd program $ldif2db_exe\n";
-  sleep(1); # allow some data to accumulate in the pipe
-  my $ii = 0;
-  while (<DB2LDIF>) {
-      ++$ii;
-      if (($ii % 250) == 0) {
-        printMsg("  Processing...\n");
-      }
-      printMsg($_);
-  }
-  close(DB2LDIF);
-  # set the ownership of the ldif file; should be the same as the 5.x slapd user id
-  if ((! $isNt) && ($oldlocaluser ne $localuser)) {
-      if (-f $ldif) {
-          chown( $newuid, $newgid, $ldif) or printMsg("\nUnable to change the ownership of $ldif to $localuser") ;
-      }
-  }
-}
-
-#############################################################################
-
-# this is used to run the system() call, capture exit and signal codes,
-# and die() upon badness; the first argument is a directory to change
-# dir to, if any, and the rest are passed to system()
-sub mySystem {
-	my $rc = &mySystemNoDie(@_);
-	my ($dir, @args) = @_;
-    if ($rc == 0) {
-# success
-    } elsif ($rc == 0xff00) {
-		die "Error executing @args: error code $rc: $!";
-    } elsif ($rc > 0x80) {
-        $rc >>= 8;
-		die "Error executing @args: error code $rc: $!";
-    } else {
-        if ($rc &   0x80) {
-            $rc &= ~0x80;
-        } 
-		die "Error executing @args: received signal $rc: $!";
-    }
-
-	# usually won't get return value
-	return $rc;
-}
-
-# This version does not die but just returns the error code
-sub mySystemNoDie {
-	my ($dir, @args) = @_;
-	if ($dir && ($dir ne "")) {
-		chdir($dir) or die "Could not change directory to $dir: $!";
-	}
-	my $cmd = $args[0];
-	# the system {$cmd} avoids some NT shell quoting problems if the $cmd
-	# needs to be quoted e.g. contains spaces; the map puts double quotes
-	# around the arguments on NT which are stripped by the command
-	# interpreter cmd.exe; but don't quote things which are already quoted
-	my @fixargs = map { /^[\"].*[\"]$/ ? $_ : $quote . $_ . $quote } @args;
-	my $rc = 0;
-	if ($cmd =~ /[.](bat|cmd)$/) {
-		# we have to pass batch files directly to the NT command interpreter
-		$cmd = $com_spec;
-#		print "system $cmd /c \"@fixargs\"\n";
-		$rc = 0xffff & system {$cmd} '/c', "\"@fixargs\"";
-	} else {
-#		print "system $cmd @fixargs\n";
-        $rc = 0xffff & system {$cmd} @fixargs;
-        }
-	chdir(${curdir})  or die "Could not change directory to $curdir: $!";
-	return $rc;
-}
-
-#############################################################################
-sub manyLdif2db {
-  my %rev_dbnames = reverse(%DBNAMES);
-  @backends = keys(%rev_dbnames);
-  $ENV{"$LIB_PATH"}=$new_libpath;
-  chdir($slapdExecDir)  or die "Could not change directory to $slapdExecDir: $!";
-  foreach $backend (@backends) {
-    my $ldif = "${ldif_rep}$backend.ldif" ;
-	if (! -f $ldif) {
-	  $ldif = ${ldif_rep}."data.ldif";
-  	}
-    &Ldif2db($ldif, $backend);
-  }
-  # remove the empty ldif directory 
-  # but not if using the data dir
-  if (!$olddatadir) {
-	rmdir($ldif_rep);
-  }
-  chdir($curdir)  or die "Could not change directory to $curdir: $!";
-}
-
-
-sub Ldif2db {
-  my $ldif    = shift ;
-  my $backend = shift ;
-  my $ldif2db_param = "ldif2db -D $serverHome -n $backend -i $ldif";
-  open(LDIF2DB, "${quote}${quote}$slapdExecName${quote} $ldif2db_param${quote} 2>&1 |") or die "Could not run ns-slapd program $ldif2db_exe\n";
-  sleep(1); # allow some data to accumulate in the pipe
-  while (<LDIF2DB>) {
-      printMsg($_);
-  }
-  close(LDIF2DB);
-  # remove the ldif file after the import
-  # but not if using the data dir
-  if (!$olddatadir) {
-	unlink($ldif) ;
-  }
-}
-
-#############################################################################
-
-#sub copyBak {
-#    opendir( OLDBAK, "$oldHome${PATHSEP}bak" ) || 
-#		die "Can't open directory $oldHome${PATHSEP}bak: $!: ";
-#    local ( @dirs ) = readdir( OLDBAK );
-#    closedir ( OLDBAK );
-#    for ( @dirs ) {
-#		if ( $_ eq "." || $_ eq ".." ) {
-#            next;
-#        } elsif ( -d "$oldHome${PATHSEP}bak${PATHSEP}$_" ) {
-#			$srcDir = "$oldHome${PATHSEP}bak${PATHSEP}$_";
-#			$destDir = "$serverHome${PATHSEP}bak${PATHSEP}$_";
-#			$srcLDIF = "$oldHome${PATHSEP}ldif${PATHSEP}bak.ldif";
-#			$destLDIF = "$serverHome${PATHSEP}ldif${PATHSEP}bak.ldif";
-#			mkdir( $destDir , 0755 ) if !( -e $destDir);
-#			# Converting database
-#			if ( !$isNT && $newuser ) {
-#				chown($newuid, $newgid, 
-#					  "$serverHome${PATHSEP}bak", $destDir);
-#			}
-#			&other_db2ldif($srcDir, $srcLDIF);
-#			if ($needAclUpg) {
-#				&mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
-#						  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
-#						  "${PATHSEP}aclupg$exe_suffix", '-d', '-i',
-#						  $srcLDIF, '-o', $destLDIF);
-#			} else {
-#				&copyBinFile($srcLDIF, $destLDIF);
-#			}
-#			&other_ldif2db($destLDIF, $destDir);
-#		}
-#	}
-#}
-#############################################################################
-
-sub startServer {
-  my $instanceDir = ${serverHome} ;
-  my $errLog = $instanceDir . $PATHSEP . 'logs' . $PATHSEP . 'errors';
-  # emulate tail -f
-  # if the last line we see does not contain "slapd started", try again
-  my $done = 0;
-  my $started = 0;
-  my $code = 0;
-  my $lastLine = "";
-  my $timeout = time + 240;	# 4 minutes
-  $ENV{"$LIB_PATH"}=$new_libpath;
-
-  my $startCmd = $instanceDir . $PATHSEP . 'start' . $script_suffix;
-  if (! -f $startCmd) {
-    $startCmd = $instanceDir . $PATHSEP . 'start-slapd' . $script_suffix;
-  }
-  printTrace("\nInstanceDir: $instanceDir\n",4);
-  $code = &mySystem($instanceDir,$startCmd);
-  open(IN, $errLog) or die "Could not open error log $errLog: $!";
-  my $pos = tell(IN);
-  while (($done == 0) && (time < $timeout)) {
-    for (; ($done == 0) && ($_ = <IN>); $pos = tell(IN)) {
-      $lastLine = $_;
-      #			print;
-      # the server has already been started and shutdown once . . .
-      if (/slapd started\./) {
-	$started++;
-	if ($started == 2) {
-	  $done = 1;
-	}
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/Initialization Failed/) {
-	#				print "Server failed to start: $_";
-	$code = &mySystem($instanceDir, $startCmd);
-	# sometimes the server will fail to come up; in that case, restart it
-      } elsif (/exiting\./) {
-	#				print "Server failed to start: $_";
-	#$code = &mySystem($startCmd);
-	
-	$code = &mySystem($instanceDir, $startCmd);
-      }
-    }
-    if ($lastLine =~ /PR_Bind/) {
-      # server port conflicts with another one, just report and punt
-      print $lastLine;
-      print "This server cannot be started until the other server on this\n";
-      print "port is shutdown.\n";
-      $done = 1;
-    }
-    if ($done == 0) {
-      # rest a bit, then . . .
-      sleep(2);
-      # . . . reset the EOF status of the file desc
-      seek(IN, $pos, 0);
-    }
-  }
-  close(IN);
-
-  if ($started < 2) {
-    $! = $code;
-    #		$now = time;
-    #		if ($now > $timeout) {
-    #			print "Possible timeout: timeout=$timeout now=$now\n";
-    #		}
-    die "Error: could not start server: $!";
-  }
-
-  return 0;
-}
-
-sub stopServer {
-	my $root = shift;
-	my $name = shift;
-	$maxStopIterations = 5;
-	print "\nShutting down server $name . . .\n";
-	
-	$ENV{"$LIB_PATH"}=$new_libpath;
-	$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop' . $script_suffix . $quote;
-	if (! -f $stopCmd) {
-		$stopCmd = $quote . $root . $PATHSEP . $name . $PATHSEP . 'stop-slapd' . $script_suffix . $quote;
-	}
-
-	if (! -f $stopCmd) {
-		# no stop command, probably a 1.X system; for NT, we'll try net stop
-		# for unix, we'll get the pid and kill it
-		if ($isNT) {
-			$stopCmd = 'net stop ' . $name;
-		} else {
-			# see if there is a pid file
-			$pidfile = $root . $PATHSEP . $name . $PATHSEP . 'logs' .
-				$PATHSEP . 'pid';
-			if (open(PIDFILE, $pidfile)) {
-				chomp($pid = <PIDFILE>);
-				close(PIDFILE);
-				while ($maxStopIterations-- && !$exitCode) {
-					$exitCode = kill(15, $pid);
-				}
-				$stopCmd = undef;
-			}
-		}
-	}
-
-	# keep looping until the stop cmd returns an error code, which usually
-	# means that what ever we want to stop is stopped, or some other error
-	# occurred e.g. permission, or no such service
-	$exitCode = &runAndIgnoreOutput($stopCmd);
-#	print "stopServer: exitCode=$exitCode\n";
-	while ($stopCmd && $maxStopIterations-- && $exitCode) {
-		$exitCode = &runAndIgnoreOutput($stopCmd);
-#		print "stopServer: exitCode=$exitCode\n";
-	}
-
-	if (!$maxStopIterations) {
-		print "Warning: could not shutdown the server: $!\n";
-	}
-
-	sleep(10) ;
-
-	$exitCode = 0;
-
-}
-
-
-sub runAndIgnoreOutput {
-	my $cmd = shift;
-	printMsg(".");
-	open(RUNCMD, "${quote}$cmd${quote} 2>&1 |") or die "Error: could not run $cmd: $!";
-	printMsg(".");
-	sleep(1); # allow pipe to fill with data
-	printMsg(".");
-	while (<RUNCMD>) {
-#		print;
-	}
-	my $code = close(RUNCMD);
-#	print "runAndIgnore: code=$code status=$?\n";
-	return $?;
-}
-#############################################################################
-# migrate some of entries present in the old DSE.ldif like 
-# cn=snmp,cn=config
-# cn=encryption,cn=config
-# all the aci's
-
-sub MigrateDSE {
-  printTrace("\nMigrate DSE entries...",1);
-  open( DSELDIF, "< $oldDSEldif" ) || die "Can't open $oldDSEldif: $!: ";
-  my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-   while ($old_entry = readOneEntry $in) {
-        my $DN = $old_entry->getDN() ;
-	SWITCH: {
-	    # migrate the entrie: cn=snmp,cn=config
-	    if ($DN =~ /^cn=SNMP,cn=config$/i) {
-	      my $entry = $conn->search("$DN","base","objectclass=nsSNMP");
-	      if ($entry) {
-		my $res = $conn->update($old_entry);
-		if ($res) {
-		  printTrace("\n$DN updated !",2);
-		}
-		else {
-		  printMsg("\nFailed to update $DN");
-		}
-	      }
-	      else {
-		printMsg("\nUnable to get info under $DN");
-	      }
-	      last SWITCH; 
-	    }
-	    # migrate the entrie: cn=encryption,cn=config
-	    if ($DN =~ /cn=encryption,cn=config$/i) {
-	      if ($conn->search("$DN","base","objectclass=*")) {
-		if ($old_entry->hasValue("objectClass", "nsEncryptionConfig")) {
-		  my $certfile = "alias/slapd-" . $newname . "-cert8.db";
-		  my $keyfile = "alias/slapd-" . $newname. "-key3.db";
-		  $old_entry->setValues("nsCertfile",$certfile) if ! $old_entry->hasValue("nsCertfile",$certfile);
-		  $old_entry->setValues("nsKeyfile",$keyfile) if ! $old_entry->hasValue("nsKeyfile",$keyfile);
-		}
-		my $res = $conn->update($old_entry);
-		if ($res) {
-		  printTrace("\n$DN updated !",2);
-		}
-		else {
-		  printMsg("\nFailed to update $DN");
-		}
-	      }
-	      else {
-		my $res = $conn->add($old_entry);
-		if ($res) {
-		  printTrace("\n$DN added !",2);
-		}
-		else {
-		  printMsg("\nFailed to add $DN");
-		}
-	      }
-	      last SWITCH; 
-	    }
-	    if (@{$old_entry->{aci}} && (! ($DN =~ /^cn=monitor$/i)) && (! ($DN =~ /^cn=schema$/i))) {
-	      # migrate aci's
-	      my $entry = $conn->search("$DN","base","objectclass=*");
-	      if ($entry) {
-		my $res = $conn->update($old_entry);
-		if ($res) {
-		  printTrace("\n$DN updated !",2);
-		}
-		else {
-		  printMsg("\nFailed to update $DN");
-		}
-	      }
-	      else {
-		my $res = $conn->add($old_entry);
-		if ($res) {
-		  printTrace("\n$DN added !",2);
-		}
-		else {
-		  printMsg("\nFailed to add $DN");
-		}
-	      }
-	      last SWITCH; 
-	    }
-	  }
-    }
-  close(DSELDIF);
-}
-#############################################################################
-# migrate SSL info
-
-sub MigrateSSL {
-  my $secPwd = 'bidon' ;
-  # copy the SSL directory
-  &copyDir("$oldHome${PATHSEP}ssl","$serverHome${PATHSEP}ssl");
-  # copy the cert db and key files
-  if ( -d "$oldDir${PATHSEP}alias") {
-    $aliasDir = "$root${PATHSEP}alias";
-    if (! -d $aliasDir) {
-      mkdir($aliasDir, 0750);
-    }
-    &stopServer($root,'slapd-'.$newname);
-    my $keydb         = "$aliasDir${PATHSEP}slapd-$newname-key3.db"  ;
-    my $certdb        = "$aliasDir${PATHSEP}slapd-$newname-cert8.db" ;
-    my $certdb7       = "$aliasDir${PATHSEP}slapd-$newname-cert7.db" ;
-    my $old_keydb     = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-key3.db" ;
-    my $old_certdb    = "$oldDir${PATHSEP}alias${PATHSEP}slapd-$oldname-cert7.db"; 
-    my $keydb_backup  = "$aliasDir${PATHSEP}slapd-$newname-key3.db_backup"  ;
-    my $certdb_backup = "$aliasDir${PATHSEP}slapd-$newname-cert7.db_backup" ;
-    if (-f $old_keydb) {
-    	if (-f $keydb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$keydb already exists. backup in $keydb_backup ...");
-		&copyBinFile($keydb,$keydb_backup);
-		&copyBinFile($old_keydb,$keydb);
-	    }
-	    else {
-		print("\n\n$keydb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    &copyBinFile($old_keydb,$keydb);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_keydb,$keydb);
-	}
-    }
-    if (-f $old_certdb) {
-	$mode = (stat($old_certdb))[2] if $PRESERVE;
-	if (-f $certdb) {
-	    if ($NO_INPUT_USER) {
-		printMsg("\n$certdb already exists. backup in $certdb_backup ...");
-		&copyBinFile($certdb,$certdb_backup);
-		unlink($certdb) || print "Couldn't delete $certdb : $!\n";
-		&copyBinFile($old_certdb,$certdb7);
-	    }
-	    else {
-		print("\n\n$certdb already exists. Do you want to overwrite it ? [no]: ");
-		my $answer = <STDIN> ;
-		if ($answer =~ /^y|yes$/i) {
-		    unlink($certdb) || print "Couldn't delete $certdb : $!\n";
-		    &copyBinFile($old_certdb,$certdb7);
-		}
-	    }
-	}
-	else {
-	    &copyBinFile($old_certdb,$certdb7);
-	}
-    }
-    # copy the old password file
-    if (-f "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt") {
-      &copyBinFile(
-		   "$oldDir${PATHSEP}alias${PATHSEP}$type-$oldname-pin.txt",
-		   "$aliasDir${PATHSEP}$type-$newname-pin.txt"
-		  );
-    }
-    &startServer();
-    if ($PRESERVE) {
-	chown($newuid,$newgid,$certdb) || print "Failed to set uid $newuid gid $newgid on $certdb : $!\n";
-	chmod($mode,$certdb) || print "Failed to set mode $mode on $certdb : $!\n";
-    }
-  }
-
-}
-
-sub DisableSSL {
-  my $entry      = $conn->search("cn=config","base","objectclass=*");
-  my $LDAPparam =  "nsslapd-security" ;
-  my $Value     = "off" ;
-  if ($entry->{$LDAPparam}[0] ne $Value) { 
-    printTrace("\nDisable SSL...",1);
-    $entry->setValues($LDAPparam, $Value);
-  }
-  my $res = $conn->update($entry);
-  if ($res) {
-    printTrace("\nSSL disabled",2);
-  }
-  else {
-    printMsg("\nCan't disable SSL, the server may have problems starting");
-  }
-}
-
-# enable the migration of client authentication informations
-sub MigrateCertmap {
-  # backup the old new certmap.conf and replace it with the old certmap.conf file
-  my $oldCertmap = "$oldDir${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf";
-  my $newCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf"  ;
-  my $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-  if (&hasChangedoldCertmap($oldCertmap)) {
-      if ($NO_INPUT_USER) {
-	  printMsg("\n$newCertmap has been backup in $backupCertmap"); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-      else {
-	  my $Ask = 1 ;  
-	  while ($Ask) {
-	      printMsg("\n\nWhere do you want to back up the file $newCertmap [$backupCertmap] ?") ;
-	      my $Answer = <STDIN> ;
-	      $backupCertmap = $Answer if ($Answer ne "\n");
-	      chomp($backupCertmap);
-	      printTrace("\nDest: .$backupCertmap.",4);
-	      if (-e $backupCertmap) {
-		  printMsg("\n\n$backupCertmap already exists. Do you want to overwrite it Yes/No [No] ?") ;
-		  if (<STDIN> =~ /yes|y/i) {
-		      $Ask = 0 ;
-		  }
-		  else {
-		      $backupCertmap = "$root${PATHSEP}shared${PATHSEP}config${PATHSEP}certmap.conf_backup" ;
-		  }
-	      }
-	      else {
-		  $Ask = 0 ;
-	      }
-	  }
-	  printTrace("\nBackup file: $newCertmap in $backupCertmap",4); 
-	  &copyBinFile($newCertmap,$backupCertmap);
-	  &copyBinFile($oldCertmap,$newCertmap);
-      }
-  }
-  else {
-  }
-}
-
-sub hasChangedoldCertmap {
-    my $certmapfile = shift ;
-    my @reference = ("certmap default         default",
-		     "default:DNComps",
-		     "default:FilterComps     e") ;
-    my $cpt = 0 ;
-    printTrace("\nhasChangedoldCertmap",3);
-    open(CERTMAP,"< $certmapfile");
-    while (<CERTMAP>) {
-	if ((! /^\s*#/) && (! /^\s*$/)) {
-	    my $ref = $reference[$cpt] ;
-	    printTrace("\nValue: $_, ref: $ref",4);
-	    if (! /^\s*$ref\s*$/) {
-		return 1 ;
-	    }
-	    else {
-		$cpt++ ;
-	    }
-	}
-    }
-    close (CERTMAP);
-    printTrace("\ncpt: $cpt",4);
-    if ($cpt < $#reference) {
-	return 1 ;
-    }
-    else {
-        return 0 ;
-    }	
-}
-#############################################################################
-# copy a directory to another
-
-sub copyDir {
-    my	$src = shift;
-    my	$dest = shift;
-	my  $exclude = shift;
-
-    opendir( SRC, $src ) or die "Can't open directory $src: $!: ";
-	my $mode;
-	my $uid;
-	my $gid;
-    mkdir ( $dest , 0755 ) or die "\nCan't create directory $dest. \nPlease check you have enough rights to create it and/or check that your parent directory exists.\n" if !( -e $dest );
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    local ( @files ) = readdir ( SRC );
-    closedir( SRC );
-    for ( @files ) {
-		if ( $_ eq "." || $_ eq ".." ) {
-			next;
-		} elsif ( $exclude && /$exclude/ ) {
-			next;
-		} elsif( -d "$src${PATHSEP}$_")  {
-			&copyDir ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_" ); 
-		} else {
-			&copyBinFile ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_");
-		}
-    }
-}
-
-sub copyBinFile {
-    my	$src = shift;
-    my	$dest = shift;
-    my  $buf = "";
-	my  $bufsize = 8192;
-
-    open( SRC, $src ) || die "Can't open $src: $!\n";
-	# if we are given a directory destination instead of a file, extract the
-	# filename portion of the source to use as the destination filename
-	if (-d $dest) {
-		$dest = $dest . $PATHSEP . &basename($src);
-	}
-    open( DEST, ">$dest" ) || die "Can't create $dest: $!\n";
-    binmode SRC;
-    binmode DEST;
-	if ($PRESERVE) {
-		$mode = (stat($src))[2];
-		($uid, $gid) = (stat(_))[4..5];
-		# Make sure files owned by the old user are owned by the
-		# new user
-		if ($uid == $olduid) {
-			$uid = $newuid;
-			$gid = $newgid;
-		}
-		chown $uid, $gid, $dest;
-		chmod $mode, $dest;
-	}
-    while (read(SRC, $buf, $bufsize)) {
-		print DEST $buf;
-    }
-    close( SRC );
-    close( DEST );
-}
-#############################################################################
-# backup new configuration files
-# backup the directory <new_root_server>/slapd-instance/config in <new_root_server>/slapd-instance/BackupConfig
-
-sub backupConfigFiles {
-  # backup the new config files
-  my $src = "$serverHome${PATHSEP}config" ;
-  my $dest = "$serverHome${PATHSEP}config_backup" ;
-  if ($NO_INPUT_USER) {
-      printMsg("\n$src has been backup in $dest"); 
-      &copyDir($src,$dest);
-  }
-  else {
-      my $Ask = 1 ;  
-      while ($Ask) {
-	  printMsg("\n\nWhere do you want to back up your configuration directory [$dest] ?") ;
-	  my $Answer = <STDIN> ;
-	  $dest = $Answer if ($Answer ne "\n");
-	  chomp($dest);
-	  printTrace("\nDest: .$dest.",4);
-	  if (-e $dest) {
-	      printMsg("\n\n$dest already exists. Do you want to overwrite it Yes/No [No] ?") ;
-	      if (<STDIN> =~ /yes|y/i) {
-		  $Ask = 0 ;
-	      }
-	      else {
-		  $dest = "$serverHome${PATHSEP}config_backup" ;
-	      }
-	  }
-	  else {
-	      $Ask = 0 ;
-	  }
-      }
-      printTrace("\nBackup Directory: $src in $dest",4); 
-      &copyDir($src,$dest);
-  }
-}
-#############################################################################
-
-sub getLDAPservername {
-    my $oldLDAPservername;
-    my $LDAPservername;
-    open(OLDSLAPDCONF, $oldSlapdConf) or
-	die "\nError: could not open old config file $oldSlapdConf \n";
-    while(<OLDSLAPDCONF>) {
-	chop;
-	if (/^localhost\s+/i) {
-	    ($oldLDAPservername = $') =~ s/^[\"]//;;
-	    $oldLDAPservername =~ s/[\"]$//;
-	    printTrace("\nName of the old LDAP server: $oldLDAPservername",3);
-        }
-    }
-    close(OLDSLAPDCONF);
-
-    open( DSELDIF, "< $DSEldif" ) || die "\nCan't open $DSEldif \n";
-    my $in = new Mozilla::LDAP::LDIF(*DSELDIF) ;
-    while ($entry = readOneEntry $in) {
-        my $DN = $entry->getDN() ;
-	if ($DN =~ /^cn=config$/i) {
-	    my $localhost = "nsslapd-localhost";
-	    my @values = $entry->getValues($localhost);
-	    if ($#values != -1) {
-		$LDAPservername = $values[0];
-	    }
-	    break;
-	}	
-    } 
-    close(DSELDIF);
-    # check old and new are installed on the same physical machine.
-    if (lc($oldLDAPservername) ne lc($LDAPservername)) {
- 	 # warn the user he tries to migrate a old server installed on a different machine from the new one
-       	 printMsg("\n\nYour old server is on $oldLDAPservername, and your new server is on $LDAPservername. We don't support migration on different machines. Do you want to continue ? Yes/No [No]:") ;
-       	 if (! (<STDIN> =~ /yes|y/i)) {
-       	     return -1;
-       	 }
-     }
-     return $LDAPservername ;       
-}
-
-############################################################################# 
-
-sub getLibPath {
-	my $myDir	= shift;
-	my $myVersion	= shift;
-	my $myMinor	= shift;
-
-	if ($isNT) {
-		return $ENV{"$LIB_PATH"};
-	}
-	if (($myVersion >= 6) && ($myMinor >= 2)) {
-		return 
-		"$myDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}lib${SEP}".
-		"$myDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${SEP}".
-		$ENV{"$LIB_PATH"};
-	} else {
-		return  "$myDir${PATHSEP}lib${SEP}".$ENV{"$LIB_PATH"};
-	}
-}
-
-#############################################################################
-
-sub getVersion {
-	my $dir         = shift;
-	my $versionstr  = shift;
-	my $version     = 0;
-	my $minor       = 0;
-	my $buildNumber = 0;
-	my $progDir     = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
-	my $progDir2    = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}";
-
-	# find the slapd executable
-	if (!$versionstr) { # version not specified on cmd line - find it
-		$prog = $dir . $progDir . $slapdExecName;
-		if (! -f $prog) {
-			$prog = $dir . $progDir2 . $slapdExecName;
-			if (-f $prog && $isNT) {
-				# if slapd is in bin/slapd and we're on NT, just assume version 1;
-				# apparently, slapd.exe doesn't like the -v argument . . .
-				return ( '1', $minor );
-			}
-			else{
-				die "Could not run slapd program $prog: $!";
-			}
-		}
-		else {
-			chdir($dir . $progDir);
-		}
-		$cur_libpath=$ENV{"$LIB_PATH"};
-		$ENV{"$LIB_PATH"}=
-			"$dir${PATHSEP}lib${SEP}".
-			"$dir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}lib${SEP}".
-			"$dir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${SEP}".
-			$ENV{"$LIB_PATH"};
-		# read the old version from the old slapd program
-
-		open(F, "${quote}${quote}$prog${quote} -v${quote} 2>&1 |") or
-			die "Could not run slapd program $prog: $!";
-		sleep(1); # allow some data to accumulate in the pipe
-#	print "Output from $prog -v:\n";
-		while (<F>) {
-			if (/^Netscape-Directory/ || /^iPlanet-Directory/i) {
-				$versionstr = $_;
-				last;
-			}
-		}
-		$code = close(F);
-		#	print "$prog returned code=$code status=$?\n";
-		$ENV{"$LIB_PATH"}=$cur_libpath;
-	}
-
-	if ($versionstr =~ /^Netscape-Directory\/(\d+)\.(\d+)(?:b\d)*\s+(\S+)/) {
-		$version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	}
-	elsif ($versionstr =~ /^Netscape-Directory\(restrict?ed-mode\)\/(\d+)\.(\d+)\s+(\S+)/) { # we can have restricted-mode or restriced-mode ...
-        $version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	}
-	elsif ($versionstr =~ /^iPlanet-Directory\/(\d+)\.(\d+)\s+(\S+)/i) {
-		$version     = $1;
-		$minor       = $2;
-		$buildNumber = $3;
-	} elsif ($versionstr =~ /(\d+)\.(\d+)/) {
-		$version     = $1;
-		$minor       = $2;
-	}
-
-	if ($version == 0) {
-	    die "\nCould not determine version of the directory server in $dir: \n";
-	}
-
-	# distinguish the 4.1 and the 4.11 thanks to the buildNumber
-	if (($version == 4) && ($minor == 1)){
-	    if (! ($buildNumber =~ /^B99\.16/)) {
-		# it's not a 4.1 Netscape Directory Server => it's a 4.11
-		$minor = 11 ;
-	    }
-	}
-	chdir($curdir) or die "Could not change directory to $curdir: $!" ;
-	return ( $version, $minor );
-}
-
-#############################################################################
-
-sub getDiff {
-    # we get references to arrays
-    my $elements = shift ; 
-    my $existing_elements = shift ;
-    my %count   = () ;
-    my %countEE = () ;
-    @diff       = () ;
-    foreach $e (@{$elements}, @{$existing_elements}) { $count{$e}++ ;}
-    foreach $e (@{existing_elements}) { $countEE{$e}++ ;}
-    foreach $e (@{$elements}) {
-	# if $e is only present in @$elements, we push it to the diff array
-	if (($count{$e} == 1) && ($countEE{$e} == 0)) {
-	    push @diff, $e ;
-	}
-    }
-    return @diff ;
-}
-
-###############################################################################################
-sub testIndexUpdating {
-         #my $entry = $conn->newEntry();
-	 #$entry->setDN("cn=djeattribute,cn=index,cn=MigratedDB_5,cn=ldbm database,cn=plugins,cn=config");
-         my $entry = $conn->search("cn=mail,cn=index,cn=MigratedDB_2,cn=ldbm database,cn=plugins,cn=config","base","objectclass=nsIndex");
-         my @types = ("pres", "sub", "eq") ;
-         my @existing_types = $entry->getValues("nsindextype");
-          my @typesToAdd     = &getDiff(\@types, \@existing_types);
-	  foreach $newtype (@typesToAdd) {
-	      $entry->addValue("nsindextype", $newtype); printTrace("\nnewtype: $newtype",2); 
-	  }
-	  my $res = $conn->update($entry) ;
-         if ($res) {print("\nUpdate index mail\n");}
-         else { print("\ncan't update index mail");}
-
-         $entry = $conn->search("cn=givenName,cn=index,cn=MigratedDB_2,cn=ldbm database,cn=plugins,cn=config","base","objectclass=nsIndex");
-         @types = ("pres", "sub", "eq") ;
-         @existing_types = $entry->getValues("nsindextype"); print("\ngivenName, existing_types: @existing_types");
-         @typesToAdd     = &getDiff(\@types, \@existing_types); print("\nTypesToAdd: @typesToAdd");
-	  foreach $newtype (@typesToAdd) {
-	      $entry->addValue("nsindextype", $newtype); printTrace("\nnewtype: $newtype",2); 
-	  }
-	  my $res = $conn->update($entry) ;
-         if ($res) {print("\nUpdate index givenName\n");}
-         else { print("\ncan't update index givenName");}
-     }
-
-
-###############################################################################################
-sub normalizeDir {
-    my $dir = shift ;
-    my $dir_prec = "" ;
-    while ($dir_prec ne $dir) {
-	$dir_prec = $dir ;
-	if ($isNT) {
-	    grep { s@\\\\@\\@g } $dir ;
-        }
-        else {
-	    grep { s@//@/@g } $dir ;
-        }
-    }
-    return $dir ;
-}
-
-
-###############################################################################################
-# return 1 if the value parameters is 
-sub isAllowedPlugin {
-    my $Value = lc(shift) ;
-    if ($allowedPlugins{$Value}) {
-	return 1 ;
-    }
-    else {
-	return 0 ;
-    }
-   
-}
-
-
-sub getSyntaxOid {
-    my $Value = lc(shift) ;
-    return $allowedPlugins{$Value} ;
-}
-
-###############################################################################################
-# return 1 if the value given in parameters is an allowed modifier
-sub isAllowedModifier {
-    my $Value = lc(shift) ;
-    if ($allowedModifiers{$Value}) {
-	return 1 ; 
-    }
-    else {
-	return 0 ;
-    }
-}
-
-sub getModifierValue {
-    my $Value = lc(shift) ;
-    return $allowedModifiers{$Value} ;
-}
-
-###############################################################################################
-
-sub GetTime {
-    my $tm = localtime;
-    (my $sec, my $min, my $hour, my $dd, my $mm, my $yy) = ($tm->sec, $tm->min, $tm->hour, $tm->mday, ($tm->mon)+1, ($tm->year)+1900);
-    $sec  = "0$sec"  unless $sec > 9  ;
-    $min  = "0$min"  unless $min > 9  ;
-    $hour = "0$hour" unless $hour > 9 ;
-    $dd   = "0$dd"   unless $dd > 9   ;
-    $mm   = "0$mm"   unless $mm > 9   ;
-    return ($sec, $min, $hour, $dd, $mm, $yy);
-}
-
-###############################################################################################
-# get uid and group id of the new slapd server.
-# The uid is done through the nsslapd-localuser attribute
-
-sub getuid_gid {
-    my $newuid ;
-    my $newgid ;
-    my $localuser ;
-    my $localuser_attr = "nsslapd-localuser" ;
-    if (! $isNT) {
-	my $entry = $conn->search("cn=config ", "base","objectclass=*", 0, ($localuser_attr)) ;
-	# Tests wether we succeed to get the entry cn=config
-	die "\nCan't get the entry cn=config \n" unless ($entry);     
-	my @values = $entry->getValues($localuser_attr);
-	if ($#values == -1 || ($values[0] eq "") ) { # tests wether the nsslapd-localuser attribute has a value
-	    printMsg("\nNo localuser has been found in the configuration of the directory. ");
-	    if ($NO_INPUT_USER) {
-		printMsg("\nWe considered nobody as the localuser");
-		$localuser = "nobody" ;
-	    }
-	    else {
-		my $Ask = 1 ;  
-		while ($Ask) {
-		    printMsg("\nUnder what user does your $Version.$Minor directory server run [nobody] ? ") ;
-		    $localuser = <STDIN> ;
-		    chomp($localuser);
-		    $localuser = "nobody" if ($localuser eq "");
-		    ($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ;
-		    if ($newuid) {
-			$Ask = 0 ;
-		    }
-		    else {
-			printMsg("\nError: $localuser is unknown from the system ");
-		    }
-		}
-	    }	
-	}
-	else {
-	    $localuser = $values[0]; # returns the first value (we should only have one localuser)
-	    my $size = $#values ;
-	}
-	($newuid, $newgid) = (getpwnam("$localuser"))[2..3] ; 
-	return ($localuser, $newuid, $newgid) ;
-    }
-    else {
-	return () ;
-    }
-}
-
-
-###############################################################################################
-# get uid and group id of the old slapd server.
-
-sub getolduid_gid {
-    my $oldlocaluser ;
-    if (! $isNT) {
-       	open(CONF,  $oldSlapdConf) or die "\nError: cannot open $oldSlapdConf: $!\n";
-       	while (<CONF>) {
-       		if (/^localuser\s+/i) {
-       			chomp($oldlocaluser = $');
-       			last;
-       		}
-       	}
-       	close(CONF);
-	($olduid, $oldgid) = (getpwnam("$oldlocaluser"))[2..3] ; 
-	return ($oldlocaluser, $olduid, $oldgid) ; 
-    }
-    else {
-	return ();
-    }
-}
-
-###############################################################################################
-# get current directory
-
-sub getCwd {
-        my $command = $isNT ? "cd" : "/bin/pwd";
-        open(PWDCMD, "$command 2>&1 |") or
-                die "Error: could not execute $command: $!";
-        # without the following sleep, reading from the pipe will
-        # return nothing; I guess it gives the pwd command time
-        # to get some data to read . . .
-        sleep(1);
-        my $currentdir;
-        while (<PWDCMD>) {
-                if (!$currentdir) {
-                        chomp($currentdir = $_);
-                }
-        }
-        my $code = close(PWDCMD);
-#       if ($code || $?) {
-#               print "$command returned code=$code status=$? dir=$curdir\n";
-#       }
-#       print "getCwd curdir=\[$curdir\]\n";
-        return $currentdir;
-}