ApqPublish/Debug/net8.0/Apq.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>Apq</name>
    </assembly>
    <members>
        <member name="T:Apq.ApqMath.Bytes8">
            <summary>
            8字节数值
            </summary>
        </member>
        <member name="M:Apq.ApqMath.Ext_MathRange.CopyRangeList``1(System.Collections.Generic.IEnumerable{Apq.ApqMath.MathRange{``0}})">
            <summary>
            复制列表(及其中每一项)
            </summary>
        </member>
        <member name="M:Apq.ApqMath.Ext_MathRange.ExcludeValues``1(System.Collections.Generic.IEnumerable{Apq.ApqMath.MathRange{``0}},``0[])">
            <summary>
            从范围列表中排除一个或多个值
            </summary>
        </member>
        <member name="T:Apq.ApqMath.MathRange`1">
            <summary>
            数值范围。默认：[Min, Max)
            </summary>
        </member>
        <member name="P:Apq.ApqMath.MathRange`1.Is最多一个值">
            <summary>
            范围内是否最多一个值(即:最多包含边界或边界都不包含)
            </summary>
        </member>
        <member name="M:Apq.ApqMath.MathRange`1.ExcludeValue(`0)">
            <summary>
            从范围中排除一个值，最多返回两个新的范围
            </summary>
        </member>
        <member name="M:Apq.ApqMath.MathRange`1.ExcludeValues(System.Collections.Generic.IEnumerable{`0})">
            <summary>
            从范围中排除多个值，返回新的范围列表
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomInt(System.Int32,System.Int32)">
            <summary>
            返回[Min,Max)范围内的随机整数
            </summary>
            <param name="Min">最小值</param>
            <param name="Max">不包含该最大值</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomLong(System.Int64,System.Int64)">
            <summary>
            返回[Min,Max)范围内的随机整数
            </summary>
            <param name="Min">最小值</param>
            <param name="Max">不包含该最大值</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomFloat(System.Single,System.Single)">
            <summary>
            返回[Min,Max)范围内的随机浮点数
            </summary>
            <param name="Min">最小值</param>
            <param name="Max">不包含该最大值</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomDouble(System.Double,System.Double)">
            <summary>
            返回[Min,Max)范围内的随机浮点数
            </summary>
            <param name="Min">最小值</param>
            <param name="Max">不包含该最大值</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomDecimal(System.Decimal,System.Decimal)">
            <summary>
            返回[Min,Max)范围内的随机decimal值
            </summary>
            <param name="Min">最小值</param>
            <param name="Max">不包含该最大值</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomInt(Apq.ApqMath.MathRange{System.Int32})">
            <summary>
            返回范围内的随机整数
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomLong(Apq.ApqMath.MathRange{System.Int64})">
            <summary>
            返回范围内的随机整数
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomFloat(Apq.ApqMath.MathRange{System.Single})">
            <summary>
            返回范围内的随机浮点数
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomDouble(Apq.ApqMath.MathRange{System.Double})">
            <summary>
            返回范围内的随机浮点数
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomDecimal(Apq.ApqMath.MathRange{System.Decimal})">
            <summary>
            返回范围内的随机decimal值
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomInt(Apq.ApqMath.MathRange{System.Int32},System.Collections.Generic.IEnumerable{System.Int32})">
            <summary>
            返回范围内的随机整数(排除值之后)
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomLong(Apq.ApqMath.MathRange{System.Int64},System.Collections.Generic.IEnumerable{System.Int64})">
            <summary>
            返回范围内的随机整数(排除值之后)
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomFloat(Apq.ApqMath.MathRange{System.Single},System.Collections.Generic.IEnumerable{System.Single})">
            <summary>
            返回范围内的随机浮点数(排除值之后)
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomDouble(Apq.ApqMath.MathRange{System.Double},System.Collections.Generic.IEnumerable{System.Double})">
            <summary>
            返回范围内的随机浮点数(排除值之后)
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomNum.RandomDecimal(Apq.ApqMath.MathRange{System.Decimal},System.Collections.Generic.IEnumerable{System.Decimal})">
            <summary>
            返回范围内的随机decimal值(排除值之后)
            </summary>
        </member>
        <member name="T:Apq.ApqMath.RandomWithWeighting`1">
            <summary>
            加权随机算法
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomWithWeighting`1.GenList(System.Collections.Generic.IList{`0},System.Collections.Generic.IList{System.Int32},System.Int32)">
            <summary>
            按对应位置生成加权随机范围
            </summary>
        </member>
        <member name="M:Apq.ApqMath.RandomWithWeighting`1.GetOne(System.Collections.Generic.IEnumerable{Apq.ApqMath.WeightingItem{`0}},System.Func{Apq.ApqMath.WeightingItem{`0},System.Boolean})">
            <summary>
            按权重随机取一条
            </summary>
            <param name="predicate">随机的范围。</param>
        </member>
        <member name="M:Apq.ApqMath.RandomWithWeighting`1.GetMulti(System.Collections.Generic.IEnumerable{Apq.ApqMath.WeightingItem{`0}},System.Int32,System.Func{Apq.ApqMath.WeightingItem{`0},System.Boolean})">
            <summary>
            按权重随机取多条
            </summary>
            <param name="count">随机结果需要多少条</param>
            <param name="predicate">每次随机的范围。可通过该参数使产生的随机结果中没有重复项</param>
            <remarks>如果范围内已无法随机出结果,就会停止。因此不一定能返回指定的条数</remarks>
        </member>
        <member name="T:Apq.ApqMath.WeightingItem">
            <summary>
            加权项
            </summary>
        </member>
        <member name="P:Apq.ApqMath.WeightingItem.Weighting">
            <summary>
            权重
            </summary>
        </member>
        <member name="P:Apq.ApqMath.WeightingItem.GotTimes">
            <summary>
            已随机到的次数
            </summary>
        </member>
        <member name="T:Apq.ApqMath.WeightingItem`1">
            <summary>
            加权项
            </summary>
            <typeparam name="T">该加权项代表的实例的类型</typeparam>
        </member>
        <member name="P:Apq.ApqMath.WeightingItem`1.Value">
            <summary>
            代表的实例项
            </summary>
        </member>
        <member name="M:Apq.AssemblyLoadContextHelper.SetProbeDirs(System.Runtime.Loader.AssemblyLoadContext,System.String)">
            <summary>
            设置探测目录:加载dll时查找哪些文件夹
            </summary>
            <param name="probeDirs">分号分隔(;)</param>
        </member>
        <member name="T:Apq.Cast">
            <summary>
            通用类型转换。
            </summary>
        </member>
        <member name="M:Apq.Cast.ChangeTypeT``1(System.Object)">
            <summary>
            通用类型转换,失败时返回 default(T)
            </summary>
            <typeparam name="T">输出类型</typeparam>
            <param name="obj">原始对象</param>
        </member>
        <member name="M:Apq.Cast.ChangeTypeT``1(System.Object,``0)">
            <summary>
            通用类型转换,失败时返回 fValue
            </summary>
            <typeparam name="T">输出类型</typeparam>
            <param name="obj">原始对象</param>
            <param name="fValue">转换失败时返回的值</param>
        </member>
        <member name="M:Apq.Cast.ChangeType(System.Object,System.Type,System.Object)">
            <summary>
            通用类型转换,失败时返回失败值。
            </summary>
        </member>
        <member name="M:Apq.Cast.TryChangeTypeT``1(System.Object)">
            <summary>
            通用类型转换,失败时返回 default(T)
            </summary>
            <typeparam name="T">输出类型</typeparam>
            <param name="obj">原始对象</param>
        </member>
        <member name="M:Apq.Cast.TryChangeTypeT``1(System.Object,``0)">
            <summary>
            通用类型转换,失败时返回 fValue
            </summary>
            <typeparam name="T">输出类型</typeparam>
            <param name="obj">原始对象</param>
            <param name="fValue">转换失败时返回的值</param>
        </member>
        <member name="M:Apq.Cast.TryChangeType(System.Object,System.Type,System.Object)">
            <summary>
            通用类型转换,失败时返回失败值。
            </summary>
        </member>
        <member name="M:Apq.Cast.ToExcelObject(System.Object)">
            <summary>
            任意值转换到 Excel 能接受的值
            </summary>
        </member>
        <member name="M:Apq.Cast.BytesToHexString(System.Collections.Generic.ICollection{System.Byte})">
            <summary>
            将字节串转换为16进制字符串
            </summary>
        </member>
        <member name="M:Apq.Cast.HexStringToBytes(System.String)">
            <summary>
            将16进制字符串转换为字节串
            </summary>
        </member>
        <member name="M:Apq.Cast.HexStringToBytesList(System.String)">
            <summary>
            将16进制字符串转换为字节串
            </summary>
        </member>
        <member name="T:Apq.Char">
            <summary>
            Apq.Char
            </summary>
        </member>
        <member name="M:Apq.Char.Random(System.Char[])">
            <summary>
            获取随机字符
            </summary>
            <param name="All">字符集</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Char.Random(System.String)">
            <summary>
            获取随机字符
            </summary>
            <param name="All">字符集</param>
            <returns></returns>
        </member>
        <member name="T:Apq.Collections.Dictionary`3">
            <summary>
            一键2值字典(映射)(典型应用:从Excel中导入指定的列到DataTable中对应的列)
            </summary>
            <typeparam name="TKey"></typeparam>
            <typeparam name="TValue1"></typeparam>
            <typeparam name="TValue2"></typeparam>
        </member>
        <member name="F:Apq.Collections.Dictionary`3.m_lst">
            <summary>
            映射列表
            </summary>
        </member>
        <member name="P:Apq.Collections.Dictionary`3.Item(`0)">
            <summary>
            获取或设置映射
            </summary>
            <param name="key"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.GetValue1(`0)">
            <summary>
            获取Value1
            </summary>
            <param name="key"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.GetValue2(`0)">
            <summary>
            获取Value2
            </summary>
            <param name="key"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.SetValue1(`0,`1)">
            <summary>
            设置Value1
            </summary>
            <returns></returns>
        </member>
        <member name="P:Apq.Collections.Dictionary`3.Keys">
            <summary>
            [只读]
            </summary>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.SetValue2(`0,`2)">
            <summary>
            设置Value2
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.IndexOf(`0)">
            <summary>
            返回指定Key在列表中的位置,-1表示不存在
            </summary>
            <param name="key"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.Add(`0,`1,`2)">
            <summary>
            添加映射
            </summary>
            <param name="key"></param>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.Clear">
            <summary>
            清除所有映射
            </summary>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.ContainsKey(`0)">
            <summary>
            检测是否已包含指定Key
            </summary>
            <param name="key"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Collections.Dictionary`3.Remove(`0)">
            <summary>
            移除指定键的映射
            </summary>
            <param name="key"></param>
            <returns></returns>
        </member>
        <member name="T:Apq.Collections.KeyValuePair`3">
            <summary>
            单条 一键2值 数据
            </summary>
            <typeparam name="TKey"></typeparam>
            <typeparam name="TValue1"></typeparam>
            <typeparam name="TValue2"></typeparam>
        </member>
        <member name="F:Apq.Collections.KeyValuePair`3.Key">
            <summary>
            键
            </summary>
        </member>
        <member name="F:Apq.Collections.KeyValuePair`3.Value1">
            <summary>
            值1
            </summary>
        </member>
        <member name="F:Apq.Collections.KeyValuePair`3.Value2">
            <summary>
            值2
            </summary>
        </member>
        <member name="T:Apq.Collections.ListChangedEventHandler`1">
            <summary>
            集合已更改(单项)
            </summary>
        </member>
        <member name="T:Apq.Collections.EventArgsListChanged`1">
            <summary>
            集合已更改的数据(单项)
            </summary>
        </member>
        <member name="P:Apq.Collections.EventArgsListChanged`1.Item">
            <summary>
            获取或设置被操作的子项
            </summary>
        </member>
        <member name="M:Apq.Collections.EventArgsListChanged`1.#ctor(`0,System.ComponentModel.ListChangedType,System.Int32)">
            <summary>
            集合已更改的数据(单项)
            </summary>
        </member>
        <member name="M:Apq.Collections.EventArgsListChanged`1.#ctor(`0,System.ComponentModel.ListChangedType,System.Int32,System.Int32)">
            <summary>
            集合已更改的数据(单项)
            </summary>
        </member>
        <member name="T:Apq.Collections.Ext_IList">
            <summary>
            IList&lt;T&gt;扩展
            </summary>
        </member>
        <member name="M:Apq.Collections.Ext_IList.Reset``2(System.Collections.IList,System.Collections.IEnumerable,System.Func{``1,``0})">
            <summary>
            用另一个集合重置当前集合。
            </summary>
            <typeparam name="T">目标类型(子项)</typeparam>
            <typeparam name="TSrc">来源类型(子项)</typeparam>
            <param name="lst">当前集合</param>
            <param name="list">来源集合</param>
            <param name="create">提供创建目标类型对象的方法</param>
        </member>
        <member name="T:Apq.Collections.HisQueue`1">
            <summary>
            历史队列
            </summary>
        </member>
        <member name="M:Apq.Collections.HisQueue`1.ReserveLately(System.Int32)">
            <summary>
            保留最近的行数(删除多出的更早的行)
            </summary>
            <returns>删除的行</returns>
        </member>
        <member name="M:Apq.Collections.HisQueue`1.Add(`0[])">
            <summary>
            添加行
            </summary>
            <returns>最后一个添加的Key(从1开始,失败则返回-1)</returns>
        </member>
        <member name="M:Apq.Collections.HisQueue`1.Early(System.Int32)">
            <summary>
            获取最早的行(默认一行)
            </summary>
        </member>
        <member name="M:Apq.Collections.HisQueue`1.Lately(System.Int32)">
            <summary>
            获取最近的行(默认一行)
            </summary>
        </member>
        <member name="T:Apq.Collections.IListWapper">
            <summary>
            IList封装
            </summary>
        </member>
        <member name="F:Apq.Collections.IListWapper.m_List">
            <summary>
            System.Collections.IList
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper.#ctor(System.Collections.IList)">
            <summary>
            装饰
            </summary>
            <param name="List"></param>
        </member>
        <member name="M:Apq.Collections.IListWapper.#ctor">
            <summary>
            新建列表并装饰
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper.IsFixedSize">
            <summary>
            获取一个值，该值指示 System.Collections.IList 是否具有固定大小。
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper.IsReadOnly">
            <summary>
            获取一个值，该值指示 System.Collections.IList 是否为只读。
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper.Item(System.Int32)">
            <summary>
            获取或设置指定索引处的元素。
            </summary>
            <param name="index">要获得或设置的元素从零开始的索引。</param>
            <returns>指定索引处的元素。</returns>
        </member>
        <member name="M:Apq.Collections.IListWapper.Add(System.Object)">
            <summary>
            将某项添加到 System.Collections.IList 中。
            </summary>
            <param name="value">要添加到 System.Collections.IList 的 System.Object。</param>
            <returns>新元素的插入位置。</returns>
        </member>
        <member name="M:Apq.Collections.IListWapper.Clear">
            <summary>
            从 System.Collections.IList 中移除所有项。
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper.Contains(System.Object)">
            <summary>
            确定 System.Collections.IList 是否包含特定值。
            </summary>
            <param name="value">要在 System.Collections.IList 中查找的 System.Object。</param>
            <returns>如果在 System.Collections.IList 中找到 System.Object，则为 true；否则为 false。</returns>
        </member>
        <member name="M:Apq.Collections.IListWapper.IndexOf(System.Object)">
            <summary>
            确定 System.Collections.IList 中特定项的索引。
            </summary>
            <param name="value">要在 System.Collections.IList 中查找的 System.Object。</param>
            <returns>如果在列表中找到，则为 value 的索引；否则为 -1。</returns>
        </member>
        <member name="M:Apq.Collections.IListWapper.Insert(System.Int32,System.Object)">
            <summary>
            将一个项插入指定索引处的 System.Collections.IList。
            </summary>
            <param name="index">从零开始的索引，应在该位置插入 value。</param>
            <param name="value">要插入 System.Collections.IList 中的 System.Object。</param>
        </member>
        <member name="M:Apq.Collections.IListWapper.Remove(System.Object)">
            <summary>
            从 System.Collections.IList 中移除特定对象的第一个匹配项。
            </summary>
            <param name="value">要从 System.Collections.IList 移除的 System.Object。</param>
        </member>
        <member name="M:Apq.Collections.IListWapper.RemoveAt(System.Int32)">
            <summary>
            移除指定索引处的 System.Collections.IList 项。
            </summary>
            <param name="index">从零开始的索引（属于要移除的项）。</param>
        </member>
        <member name="P:Apq.Collections.IListWapper.Count">
            <summary>
            获取 System.Collections.ICollection 中包含的元素数。
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper.IsSynchronized">
            <summary>
            获取一个值，该值指示是否同步对 System.Collections.ICollection 的访问（线程安全）。
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper.SyncRoot">
            <summary>
            获取可用于同步 System.Collections.ICollection 访问的对象。
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper.CopyTo(System.Array,System.Int32)">
            <summary>
            从特定的 System.Array 索引处开始，将 System.Collections.ICollection 的元素复制到一个 System.Array 中。
            </summary>
            <param name="array">作为从 System.Collections.ICollection 复制的元素的目标位置的一维 System.Array。System.Array 必须具有从零开始的索引。</param>
            <param name="index">array 中从零开始的索引，从此处开始复制。</param>
        </member>
        <member name="M:Apq.Collections.IListWapper.GetEnumerator">
            <summary>
            返回一个循环访问集合的枚举数。
            </summary>
            <returns>可用于循环访问集合的 System.Collections.IEnumerator 对象。</returns>
        </member>
        <member name="E:Apq.Collections.IListWapper.ListChanged">
            <summary>
            ListChanged 事件
            </summary>
        </member>
        <member name="F:Apq.Collections.IListWapper.MayListChanged">
            <summary>
            是否启用 ListChanged
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper.OnListChanged(System.ComponentModel.ListChangedEventArgs)">
            <summary>
            引发 ListChanged
            </summary>
            <param name="e"></param>
        </member>
        <member name="M:Apq.Collections.IListWapper.Contains(System.Collections.IList,System.Object)">
            <summary>
            返回列表中是否包含指定项(支持null)
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper.AddUnique(System.Object)">
            <summary>
            将某项添加到 System.Collections.Generic.IList 中，该项唯一。
            </summary>
            <returns>新项的插入位置。</returns>
        </member>
        <member name="M:Apq.Collections.IListWapper.Reset(System.Collections.IEnumerable)">
            <summary>
            用另一个集合重置当前集合
            </summary>
        </member>
        <member name="T:Apq.Collections.IListWapper`1">
            <summary>
            IList&lt;T&gt;封装
            </summary>
        </member>
        <member name="F:Apq.Collections.IListWapper`1.m_List">
            <summary>
            System.Collections.Generic.IList
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.#ctor(System.Collections.Generic.IList{`0})">
            <summary>
            装饰
            </summary>
            <param name="List"></param>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.#ctor">
            <summary>
            新建列表并装饰
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.IndexOf(`0)">
            <summary>
            返回项在列表中的索引位置
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.Insert(System.Int32,`0)">
            <summary>
            将一个项插入指定索引处
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.RemoveAt(System.Int32)">
            <summary>
            移除指定索引处的元素
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper`1.Item(System.Int32)">
            <summary>
            获取或设置指定索引处的元素
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.Add(`0)">
            <summary>
            将某项添加到列表中
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.Clear">
            <summary>
            移除所有项
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.Contains(`0)">
            <summary>
            确定列表是否包含特定项
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.CopyTo(`0[],System.Int32)">
            <summary>
            将列表的所有项复制到数组指定索引处
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper`1.Count">
            <summary>
            获取列表中包含的元素数
            </summary>
        </member>
        <member name="P:Apq.Collections.IListWapper`1.IsReadOnly">
            <summary>
            列表是否只读
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.Remove(`0)">
            <summary>
            移除子项。没有找到 item，该方法也会返回 false
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.GetEnumerator">
            <summary>
            返回一个循环访问列表的枚举器
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.System#Collections#IEnumerable#GetEnumerator">
            <summary>
            返回一个循环访问列表的枚举器
            </summary>
        </member>
        <member name="E:Apq.Collections.IListWapper`1.ListChanged">
            <summary>
            ListChanged 事件
            </summary>
        </member>
        <member name="F:Apq.Collections.IListWapper`1.MayListChanged">
            <summary>
            是否启用 ListChanged
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.OnListChanged(Apq.Collections.EventArgsListChanged{`0})">
            <summary>
            引发 ListChanged
            </summary>
            <param name="e"></param>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.Contains(System.Collections.Generic.IList{`0},`0)">
            <summary>
            返回列表中是否包含指定项(支持null)
            </summary>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.AddUnique(`0)">
            <summary>
            将某项添加到 System.Collections.Generic.IList 中，该项唯一。
            </summary>
            <returns>新项的插入位置。</returns>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.AddRange(Apq.Collections.IListWapper{`0})">
            <summary>
            添加列表
            </summary>
            <param name="values"></param>
        </member>
        <member name="M:Apq.Collections.IListWapper`1.Reset(System.Collections.Generic.IEnumerable{`0})">
            <summary>
            用另一个集合重置当前集合
            </summary>
        </member>
        <member name="T:Apq.Configs">
            <summary>
            配置缓存(配置文件名不能重复,即使是位于不同目录)
            </summary>
        </member>
        <member name="M:Apq.Configs.Init">
            <summary>
            对新创建的实例进行初始化
            </summary>
        </member>
        <member name="M:Apq.Configs.GetConfig(System.String,System.String)">
            <summary>
            获取配置,缓存中不存在时,自动查找Json配置文件并加入缓存
            </summary>
        </member>
        <member name="P:Apq.Configs.Item(System.String,System.String)">
            <summary>
            配置文件名不能重复,即使是位于不同目录
            </summary>
        </member>
        <member name="P:Apq.Configs.AppSettings">
            <summary>
            appsettings.json
            </summary>
        </member>
        <member name="P:Apq.Configs.AppConfig">
            <summary>
            AppConfig.json
            </summary>
        </member>
        <member name="T:Apq.Configuration.ConfigBase">
            <summary>
            配置基类
            </summary>
        </member>
        <member name="P:Apq.Configuration.ConfigBase.FilePath">
            <summary>
            配置文件路径(或文件名、或接口地址)
            </summary>
        </member>
        <member name="P:Apq.Configuration.ConfigBase.ConfigName">
            <summary>
            配置命名
            </summary>
        </member>
        <member name="M:Apq.Configuration.ConfigBase.Load(System.Boolean)">
            <summary>
            加载配置
            </summary>
        </member>
        <member name="M:Apq.Configuration.ConfigBase.Get(System.String)">
            <summary>
            获取配置值
            </summary>
        </member>
        <member name="M:Apq.Configuration.ConfigBase.Set(System.String,System.String)">
            <summary>
            设置配置值
            </summary>
        </member>
        <member name="M:Apq.Configuration.ConfigBase.Get``1(System.String)">
            <summary>
            获取配置值
            </summary>
        </member>
        <member name="T:Apq.Configuration.FileConfig">
            <summary>
            通过文件保存的配置(先加载DefaultConfig目录,再加载Config目录下的同名文件)
            </summary>
        </member>
        <member name="P:Apq.Configuration.FileConfig.Configuration_m">
            <summary>
            从文件加载出来的配置
            </summary>
        </member>
        <member name="P:Apq.Configuration.FileConfig.DefaultFilePath_m">
            <summary>
            默认配置文件名
            </summary>
        </member>
        <member name="P:Apq.Configuration.FileConfig.UserFilePath_m">
            <summary>
            用户配置文件名
            </summary>
        </member>
        <member name="P:Apq.Configuration.FileConfig.ConfigName">
            <summary>
            配置命名
            </summary>
        </member>
        <member name="M:Apq.Configuration.FileConfig.Get(System.String)">
            <summary>
            获取配置值
            </summary>
        </member>
        <member name="M:Apq.Configuration.FileConfig.Set(System.String,System.String)">
            <summary>
            设置配置值
            </summary>
            <remarks>由派生类实现保存到文件</remarks>
        </member>
        <member name="T:Apq.Configuration.JsonConfig">
            <summary>
            .json配置文件链
            </summary>
        </member>
        <member name="M:Apq.Configuration.JsonConfig.Load(System.Boolean)">
            <summary>
            加载配置
            </summary>
        </member>
        <member name="M:Apq.Configuration.JsonConfig.Set(System.String,System.String)">
            <summary>
            设置配置值
            </summary>
        </member>
        <member name="T:Apq.Configuration.XmlConfig">
            <summary>
            .xml配置文件链
            </summary>
        </member>
        <member name="M:Apq.Configuration.XmlConfig.Load(System.Boolean)">
            <summary>
            加载配置
            </summary>
        </member>
        <member name="T:Apq.ConnectionStrings.Access2007.OleDbConnection">
            <summary>
            OLEDB 连接字符串[可能不对]
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Access2007.OleDbConnection.ConnectionStringFormat">
            <summary>
            带格式的连接字符串
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Access2007.OleDbConnection.ConnectionStringDBPwdFormat">
            <summary>
            文件密码部分
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Access2007.OleDbConnection.GetConnectionString(System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource">文件地址</param>
            <param name="UserName">用户名</param>
            <param name="pwd">用户密码</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.Access2007.OleDbConnection.GetConnectionString(System.String,System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource">文件地址</param>
            <param name="UserName">用户名</param>
            <param name="pwd">用户密码</param>
            <param name="dbpwd">文件密码</param>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.Access.OleDbConnection">
            <summary>
            OLEDB 连接字符串[可能不对]
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Access.OleDbConnection.ConnectionStringFormat">
            <summary>
            带格式的连接字符串
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Access.OleDbConnection.ConnectionStringDBPwdFormat">
            <summary>
            文件密码部分
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Access.OleDbConnection.GetConnectionString(System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource">文件地址</param>
            <param name="UserName">用户名</param>
            <param name="pwd">用户密码</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.Access.OleDbConnection.GetConnectionString(System.String,System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource">文件地址</param>
            <param name="UserName">用户名</param>
            <param name="pwd">用户密码</param>
            <param name="dbpwd">文件密码</param>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.Common">
            <summary>
            连接字符串公用类
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Common.GetConnectionString(Apq.ConnectionStrings.DBProduct,System.String,System.Int32,System.String,System.String,System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
        </member>
        <member name="T:Apq.ConnectionStrings.DBProduct">
            <summary>
            数据库产品
            </summary>
        </member>
        <member name="F:Apq.ConnectionStrings.DBProduct.MsSql">
            <summary>
            MsSql
            </summary>
        </member>
        <member name="F:Apq.ConnectionStrings.DBProduct.MySql">
            <summary>
            MySql
            </summary>
        </member>
        <member name="F:Apq.ConnectionStrings.DBProduct.Oracle">
            <summary>
            Oracle
            </summary>
        </member>
        <member name="F:Apq.ConnectionStrings.DBProduct.Redis">
            <summary>
            Redis
            </summary>
        </member>
        <member name="T:Apq.ConnectionStrings.EF6.EntryConnection">
            <summary>
            EF6的 连接字符串
            实例使用方法:通过属性设置各项值(resName,provider,provider connection string,MultipleActiveResultSets),最后调用GetConnectionString方法获取
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.EF6.EntryConnection.GetConnectionString(System.String,System.String,System.String,System.Boolean)">
            <summary>
            获取连接字符串
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.EF6.EntryConnection.ResName">
            <summary>
            ResName
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.EF6.EntryConnection.DBConnectionString">
            <summary>
            DBConnectionString
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.EF6.EntryConnection.DBProvider">
            <summary>
            DBProvider
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.EF6.EntryConnection.MultipleActiveResultSets">
            <summary>
            DBName
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.EF6.EntryConnection.GetConnectionString">
            <summary>
            获取连接字符串
            </summary>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.Excel2007.OleDbConnection">
            <summary>
            OLEDB 连接字符串
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Excel2007.OleDbConnection.ConnectionStringFormat">
            <summary>
            带格式的连接字符串
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Excel2007.OleDbConnection.GetConnectionString(System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.Excel2007.OleDbConnection.GetConnectionString(System.String,System.String,System.String,System.Boolean)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource"></param>
            <param name="HDR">首行是否为列名["Yes"]</param>
            <param name="IMEX">是否全以文本格式读取["0"]</param>
            <param name="IsXml">是否为Xml文件</param>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.Excel.OleDbConnection">
            <summary>
            OLEDB 连接字符串
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Excel.OleDbConnection.ConnectionStringFormat">
            <summary>
            带格式的连接字符串
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Excel.OleDbConnection.GetConnectionString(System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.Excel.OleDbConnection.GetConnectionString(System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource"></param>
            <param name="HDR">首行是否为列名["Yes"]</param>
            <param name="IMEX">是否全以文本格式读取["1"]</param>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.MySql.MySqlConnection">
            <summary>
            MySql 连接字符串
            实例使用方法:通过属性设置各项值(IP,Uid,Pwd必选),最后调用GetConnectionString方法获取
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.MySql.MySqlConnection.CreateConnection(System.String,System.Int32,System.String,System.String,System.String,System.String)">
            <summary>
            创建MsSql连接对象
            </summary>
            <param name="Server"></param>
            <param name="Port"></param>
            <param name="Uid"></param>
            <param name="Pwd"></param>
            <param name="dbName"></param>
            <param name="Option"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.MySql.MySqlConnection.GetConnectionString(System.String,System.Int32,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="Uid">用户名</param>
            <param name="Pwd">密码</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.MySql.MySqlConnection.GetConnectionString(System.String,System.Int32,System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="Uid">用户名</param>
            <param name="Pwd">密码</param>
            <param name="dbName">默认数据库名</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.MySql.MySqlConnection.GetConnectionString(System.String,System.Int32,System.String,System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="Uid">用户名</param>
            <param name="Pwd">密码</param>
            <param name="dbName">默认数据库名</param>
            <param name="Option">其余选项</param>
            <returns></returns>
        </member>
        <member name="P:Apq.ConnectionStrings.MySql.MySqlConnection.IP">
            <summary>
            IP
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.MySql.MySqlConnection.Port">
            <summary>
            Port
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.MySql.MySqlConnection.Uid">
            <summary>
            Uid
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.MySql.MySqlConnection.DBName">
            <summary>
            DBName
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.MySql.MySqlConnection.Pwd">
            <summary>
            密码
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.MySql.MySqlConnection.Option">
            <summary>
            其余选项(直接添加到连接字符串后面)
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.MySql.MySqlConnection.GetConnectionString">
            <summary>
            获取连接字符串
            </summary>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.Oracle.OracleConnection">
            <summary>
            OracleConnection 连接字符串,使用tns
            实例使用方法:通过属性设置各项值(UserId,Pwd必选),最后调用GetConnectionString方法获取
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Oracle.OracleConnection.GetConnectionString(System.String,System.Int32,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="Uid">用户名</param>
            <param name="Pwd">密码</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.Oracle.OracleConnection.GetConnectionString(System.String,System.Int32,System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="Uid">用户名</param>
            <param name="Pwd">密码</param>
            <param name="dbName">默认数据库名</param>
            <returns></returns>
        </member>
        <member name="P:Apq.ConnectionStrings.Oracle.OracleConnection.IP">
            <summary>
            IP
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Oracle.OracleConnection.Port">
            <summary>
            Port
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Oracle.OracleConnection.Uid">
            <summary>
            Uid
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Oracle.OracleConnection.DBName">
            <summary>
            DBName
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Oracle.OracleConnection.Pwd">
            <summary>
            密码
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Oracle.OracleConnection.GetConnectionString">
            <summary>
            获取连接字符串
            </summary>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.SQLite.SQLiteConnection">
            <summary>
            SQLite 连接字符串
            实例使用方法:通过属性设置各项值(FilePath必选),最后调用GetConnectionString方法获取
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLite.SQLiteConnection.GetConnectionString(System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="FilePath">文件路径(最好是绝对路径)</param>
            <param name="Pwd">密码</param>
            <returns></returns>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLite.SQLiteConnection.FilePath">
            <summary>
            文件路径(最好是绝对路径)
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLite.SQLiteConnection.Pwd">
            <summary>
            密码
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLite.SQLiteConnection.GetConnectionString">
            <summary>
            获取连接字符串
            </summary>
            <returns></returns>
        </member>
        <member name="T:Apq.ConnectionStrings.SQLServer.SqlConnection">
            <summary>
            SqlConnection 连接字符串
            实例使用方法:通过属性设置各项值(IP,Port,UserId,Pwd必选),最后调用GetConnectionString方法获取
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLServer.SqlConnection.GetConnectionString(System.String,System.Int32,System.String,System.String,System.String,System.Boolean,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="UserId">用户名</param>
            <param name="Pwd">密码</param>
            <param name="dbName">默认数据库名</param>
            <param name="Async">是否允许异步</param>
            <param name="AppName">客户端程序名称</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLServer.SqlConnection.GetConnectionString(System.String,System.Int32,System.String,System.String,System.Boolean,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="UserId">用户名</param>
            <param name="Pwd">密码</param>
            <param name="Async">是否允许异步</param>
            <param name="AppName">客户端程序名称</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLServer.SqlConnection.GetConnectionString(System.String,System.Int32,System.String,System.String,System.String,System.String,System.Boolean,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="UserId">用户名</param>
            <param name="Pwd">密码</param>
            <param name="dbName">默认数据库名</param>
            <param name="Option">其余选项</param>
            <param name="Async">是否允许异步</param>
            <param name="AppName">客户端程序名称</param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLServer.SqlConnection.GetConnectionString(System.String,System.Int32,System.String,System.String,System.String,System.String,System.String,System.Boolean,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="IP">服务器地址</param>
            <param name="Port">端口</param>
            <param name="UserId">用户名</param>
            <param name="Pwd">密码</param>
            <param name="dbName">默认数据库名</param>
            <param name="Mirror">镜像地址(IP,Port)</param>
            <param name="Option">其余选项</param>
            <param name="Async">是否允许异步</param>
            <param name="AppName">客户端程序名称</param>
            <returns></returns>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.IP">
            <summary>
            IP
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.Port">
            <summary>
            Port
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.UserId">
            <summary>
            UserId
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.DBName">
            <summary>
            DBName
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.AppName">
            <summary>
            客户端程序名称
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.Mirror">
            <summary>
            镜像IP
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.Pwd">
            <summary>
            密码
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.UseTrusted">
            <summary>
            使用信任连接(winodws登录)
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.Async">
            <summary>
            是否允许异步
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.SQLServer.SqlConnection.Option">
            <summary>
            其余选项(直接添加到连接字符串后面)
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLServer.SqlConnection.GetConnectionString">
            <summary>
            获取连接字符串
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.SQLServer.SqlConnection.TestAvailable(System.Boolean)">
            <summary>
            测试连接可用性
            </summary>
            <param name="ThrowException">连接失败时是否抛出异常</param>
        </member>
        <member name="T:Apq.ConnectionStrings.Textfile.OleDbConnection">
            <summary>
            OLEDB 连接字符串
            </summary>
        </member>
        <member name="P:Apq.ConnectionStrings.Textfile.OleDbConnection.ConnectionStringFormat">
            <summary>
            带格式的连接字符串
            </summary>
        </member>
        <member name="M:Apq.ConnectionStrings.Textfile.OleDbConnection.GetConnectionString(System.String)">
            <summary>
            Excel 带格式的连接字符串
            </summary>
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.ConnectionStrings.Textfile.OleDbConnection.GetConnectionString(System.String,System.String,System.String)">
            <summary>
            获取连接字符串
            </summary>
            <param name="dataSource"></param>
            <param name="HDR">首行是否为列名["Yes"]</param>
            <param name="FMT">指定分隔符或指明文本等宽{Fixed:等宽,TabDelimited:Tab分隔,Delimited(,):以括号内容分隔}</param>
            <returns></returns>
        </member>
        <member name="T:Apq.CSMember">
            <summary>
            表示C#编程中某个对象具有某个名称的成员
            </summary>
            <remarks>
            表示C#编程中某个对象具有某个名称的成员
            </remarks>
        </member>
        <member name="M:Apq.CSMember.#ctor(System.Object,System.String)">
            <summary>
            表示C#编程中某个对象具有某个名称的成员
            </summary>
            <remarks>
            表示C#编程中某个对象具有某个名称的成员
            </remarks>
        </member>
        <member name="P:Apq.CSMember.Obj">
            <summary>
            获取或设置对象
            </summary>
        </member>
        <member name="P:Apq.CSMember.MemberName">
            <summary>
            获取或设置成员名
            </summary>
        </member>
        <member name="M:Apq.CSMember.Equals(Apq.CSMember)">
            <summary>
            相等比较
            </summary>
        </member>
        <member name="M:Apq.CSMember.GetHashCode">
            <summary>
            获取哈希值
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.CSMember.Equals(System.Object)">
            <summary>
            相等比较
            </summary>
        </member>
        <member name="M:Apq.CSMember.op_Equality(Apq.CSMember,Apq.CSMember)">
            <summary>
            ==运算符
            </summary>
        </member>
        <member name="M:Apq.CSMember.op_Inequality(Apq.CSMember,Apq.CSMember)">
            <summary>
            !=运算符
            </summary>
        </member>
        <member name="T:Apq.DB.DBAdapterBase">
            <summary>
            数据库适配器基类
            </summary>
        </member>
        <member name="P:Apq.DB.DBAdapterBase.DBAdapter">
            <summary>
            获取或设置内部数据库适配器(设置时自动检测列映射和CRUD命令，如果缺失，自动添加)
            </summary>
        </member>
        <member name="T:Apq.DB.DbParameterCollectionHelper">
            <summary>
            DbParameterCollectionHelper
            </summary>
            <param name="Parameters"></param>
        </member>
        <member name="M:Apq.DB.DbParameterCollectionHelper.#ctor(System.Data.Common.DbParameterCollection)">
            <summary>
            DbParameterCollectionHelper
            </summary>
            <param name="Parameters"></param>
        </member>
        <member name="P:Apq.DB.DbParameterCollectionHelper.Parameters">
            <summary>
            获取参数集合
            </summary>
        </member>
        <member name="P:Apq.DB.DbParameterCollectionHelper.Item(System.String)">
            <summary>
            获取或设置指定参数名的参数
            </summary>
            <param name="ParameterName">参数名</param>
            <returns></returns>
        </member>
        <member name="T:Apq.DB.MsSql.CommSQL">
            <summary>
            常用的MsSql查询语句
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.CommSQL.ProductMajorVersion">
            <summary>
            主版本号
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.CommSQL.ProductMinorVersion">
            <summary>
            次版本号
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.CommSQL.ExistsTable">
            <summary>
            是否存在指定的表
            输入参数：@TableName
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.CommSQL.Apq_NewID">
            <summary>
            获取自增值(通过序列或配置表，根据版本自动选择)
            输入参数：@soName, @Count
            输出参数：@First, @Last, @Inc, @Time
            依赖项: Apq_NewIDBySO, Apq_NewIDByRow, Apq_CreateSO, Apq_CreateTable_Apq_ID, Apq_ProductMajorVersion
            </summary>
        </member>
        <member name="T:Apq.DB.MsSql.MsSqlType">
            <summary>
            MsSql数据库类型枚举
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.bigint">
            <summary>
            BigInt
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.binary">
            <summary>
            binary
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.bit">
            <summary>
            bit
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.char">
            <summary>
            char
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.date">
            <summary>
            date
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.datetime">
            <summary>
            datetime
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.datetime2">
            <summary>
            datetime2
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.datetimeoffset">
            <summary>
            datetimeoffset
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.decimal">
            <summary>
            decimal
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.float">
            <summary>
            float
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.geography">
            <summary>
            geography
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.geometry">
            <summary>
            geometry
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.hierarchyid">
            <summary>
            hierarchyid
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.image">
            <summary>
            image
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.int">
            <summary>
            int
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.money">
            <summary>
            money
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.nchar">
            <summary>
            nchar
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.ntext">
            <summary>
            ntext
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.numeric">
            <summary>
            numeric == decimal
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.nvarchar">
            <summary>
            nvarchar
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.real">
            <summary>
            real == float(24)
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.smalldatetime">
            <summary>
            smalldatetime
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.smallint">
            <summary>
            smallint
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.smallmoney">
            <summary>
            smallmoney
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.sql_variant">
            <summary>
            sql_variant
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.sysname">
            <summary>
            sysname
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.text">
            <summary>
            text
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.time">
            <summary>
            time
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.timestamp">
            <summary>
            timestamp
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.tinyint">
            <summary>
            tinyint
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.uniqueidentifier">
            <summary>
            uniqueidentifier
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.varbinary">
            <summary>
            varbinary
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.varchar">
            <summary>
            varchar
            </summary>
        </member>
        <member name="F:Apq.DB.MsSql.MsSqlType.xml">
            <summary>
            xml
            </summary>
        </member>
        <member name="T:Apq.DB.MsSql.MsSqlColumn">
            <summary>
            表示MsSql的列定义
            </summary>
        </member>
        <member name="P:Apq.DB.MsSql.MsSqlColumn.ColumnName">
            <summary>
            列名
            </summary>
        </member>
        <member name="P:Apq.DB.MsSql.MsSqlColumn.Caption">
            <summary>
            标题(一般是指中文标题)
            </summary>
        </member>
        <member name="P:Apq.DB.MsSql.MsSqlColumn.Description">
            <summary>
            说明(描述)
            </summary>
        </member>
        <member name="P:Apq.DB.MsSql.MsSqlColumn.MsSqlType">
            <summary>
            类型
            </summary>
        </member>
        <member name="P:Apq.DB.MsSql.MsSqlColumn.Length">
            <summary>
            长度或精度
            </summary>
        </member>
        <member name="P:Apq.DB.MsSql.MsSqlColumn.Scale">
            <summary>
            小数位数
            </summary>
        </member>
        <member name="P:Apq.DB.MsSql.MsSqlColumn.TypeFrom">
            <summary>
            类型是根据什么解析出来的{0:未定义,1:Sql列类型,2:C#变量类型,3:默认类型(nvarchar)}
            </summary>
        </member>
        <member name="M:Apq.DB.MsSql.MsSqlColumn.GetMsSqlTypeString">
            <summary>
            获取MsSqlType定义的字符串表示。默认为nvarchar(max)
            </summary>
        </member>
        <member name="M:Apq.DB.MsSql.MsSqlColumn.GetColumnDefineString">
            <summary>
            获取MsSql的列定义语句
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.DB.MsSql.MsSqlTypeParser.FromName(System.String)">
            <summary>
            根据枚举名称字符串解析出枚举实例
            </summary>
            <returns>MsSqlType:枚举实例,
            TypeFrom:类型是根据什么解析出来的{0:未定义,1:Sql列类型,2:C#变量类型}</returns>
        </member>
        <member name="M:Apq.DB.SQLite.Meta.CreateDBIfNotExists(System.String)">
            <summary>
            若数据库文件不存在,则创建数据库文件
            </summary>
            <returns>执行了创建文件时返回true</returns>
        </member>
        <member name="M:Apq.DB.SQLite.Meta.CreateTableIfNotExists(System.String,System.String,System.String,System.String)">
            <summary>
            建表(可选参数:初始数据)
            </summary>
        </member>
        <member name="T:Apq.Delegates">
            <summary>
            代理及其示例方法
            </summary>
        </member>
        <member name="T:Apq.Delegates.SetProperty">
            <summary>
            设置 obj 的 PropertyName 属性值为 Value
            </summary>
            <param name="obj">对象</param>
            <param name="PropertyName">属性名</param>
            <param name="Value">值</param>
        </member>
        <member name="M:Apq.Delegates.SetProperty_M(System.Object,System.String,System.Object)">
            <summary>
            [反射]设置对象属性
            </summary>
            <param name="obj">对象</param>
            <param name="PropertyName">属性名</param>
            <param name="Value">值</param>
        </member>
        <member name="T:Apq.Easer">
            <summary>
            缓动器(进度转换：时间进度=>插值进度)
            </summary>
        </member>
        <member name="F:Apq.EaseType.Linear">
            <summary>
            线性缓动，匀速运动
            </summary>
        </member>
        <member name="F:Apq.EaseType.InSine">
            <summary>
            正弦加速缓动，开始缓慢，后来加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutSine">
            <summary>
            正弦减速缓动，开始快速，后来减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutSine">
            <summary>
            正弦波缓动，先加速后减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InQuad">
            <summary>
            二次方加速缓动，开始缓慢，后来加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutQuad">
            <summary>
            二次方减速缓动，开始快速，后来减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutQuad">
            <summary>
            二次方波缓动，先加速后减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InCubic">
            <summary>
            三次方加速缓动，开始缓慢，后来加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutCubic">
            <summary>
            三次方减速缓动，开始快速，后来减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutCubic">
            <summary>
            三次方波缓动，先加速后减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InQuart">
            <summary>
            四次方加速缓动，开始缓慢，后来加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutQuart">
            <summary>
            四次方减速缓动，开始快速，后来减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutQuart">
            <summary>
            四次方波缓动，先加速后减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InQuint">
            <summary>
            五次方加速缓动，开始缓慢，后来加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutQuint">
            <summary>
            五次方减速缓动，开始快速，后来减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutQuint">
            <summary>
            五次方波缓动，先加速后减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InExpo">
            <summary>
            指数加速缓动，开始缓慢，后来加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutExpo">
            <summary>
            指数减速缓动，开始快速，后来减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutExpo">
            <summary>
            指数波缓动，先加速后减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InCirc">
            <summary>
            圆形加速缓动，开始缓慢，后来加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutCirc">
            <summary>
            圆形减速缓动，开始快速，后来减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutCirc">
            <summary>
            圆形波缓动，先加速后减速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutBack">
            <summary>
            先正弦减速后正弦加速缓动，开始快速，后来减速，再加速
            </summary>
        </member>
        <member name="F:Apq.EaseType.InBack">
            <summary>
            回退加速（类似弹簧），开始缓慢，后来加速并回退一定距离，然后减速回弹
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutBack">
            <summary>
            回退减速（类似弹簧），开始快速，后来减速并回退一定距离，然后加速回弹
            </summary>
        </member>
        <member name="F:Apq.EaseType.InBounce">
            <summary>
            弹跳加速缓动，开始缓慢，后来加速并反弹
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutBounce">
            <summary>
            弹跳减速缓动，开始快速，后来减速并反弹
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutBounce">
            <summary>
            弹跳波缓动，先加速后减速并反弹
            (有可能是死循环，==测试后没问题再去掉这行注释)
            </summary>
        </member>
        <member name="F:Apq.EaseType.InElastic">
            <summary>
            弹性加速缓动，开始缓慢，后来加速并弹性拉伸
            </summary>
        </member>
        <member name="F:Apq.EaseType.OutElastic">
            <summary>
            弹性减速缓动，开始快速，后来减速并弹性拉伸
            </summary>
        </member>
        <member name="F:Apq.EaseType.InOutElastic">
            <summary>
            弹性波缓动，先加速后减速并弹性拉伸
            </summary>
        </member>
        <member name="T:Apq.EF.LoggerProvider">
            <summary>
            将EF的日志写入到 EFRolling日志器
            </summary>
        </member>
        <member name="M:Apq.EF.LoggerProvider.Dispose(System.Boolean)">
            <param name="disposing">指定释放类型{true:托管对象,false:未托管对象}</param>
        </member>
        <member name="T:Apq.EF.SqlLogger">
            <summary>
            将EF的日志写入到 EFRolling日志器
            </summary>
            <param name="categoryName">日志所属类别</param>
        </member>
        <member name="M:Apq.EF.SqlLogger.#ctor(System.String)">
            <summary>
            将EF的日志写入到 EFRolling日志器
            </summary>
            <param name="categoryName">日志所属类别</param>
        </member>
        <member name="T:Apq.EnumRow">
            <summary>
            表示枚举的一个值
            </summary>
        </member>
        <member name="P:Apq.EnumRow.Name">
            <summary>
            枚举名
            </summary>
        </member>
        <member name="P:Apq.EnumRow.Value">
            <summary>
            枚举值
            </summary>
        </member>
        <member name="P:Apq.EnumRow.Description">
            <summary>
            附加描述
            </summary>
        </member>
        <member name="T:Apq.EnumVisitor`1">
            <summary>
            枚举遍历器
            </summary>
            <typeparam name="T">枚举类型</typeparam>
        </member>
        <member name="M:Apq.EnumVisitor`1.AsEnumerable">
            <summary>
            返回类型为 IEnumerable&lt;T&gt; 的输入。
            </summary>
            <returns>类型为 IEnumerable&lt;T&gt; 的序列。</returns>
        </member>
        <member name="M:Apq.EnumVisitor`1.GetEnumerator">
            <summary>
            返回一个循环访问集合的枚举数。
            </summary>
            <returns>可用于循环访问集合的 IEnumerator 。</returns>
        </member>
        <member name="M:Apq.EnumVisitor`1.System#Collections#IEnumerable#GetEnumerator">
            <summary>
            返回一个循环访问集合的枚举数。
            </summary>
            <returns>可用于循环访问集合的 IEnumerator 。</returns>
        </member>
        <member name="M:Apq.EnumVisitor`1.ToDataTable">
            <summary>
            以三列DataTable(Name,Value{long},Description)输出枚举的所有值
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.EnumVisitor`1.ToList">
            <summary>
            以EnumRow(Name,Value{long},Description)的列表输出枚举的所有值
            </summary>
            <returns></returns>
        </member>
        <member name="T:Apq.EventArgsBase">
            <summary>
            事件参数基础类
            </summary>
        </member>
        <member name="P:Apq.EventArgsBase.PIns">
            <summary>
            输出参数列表
            </summary>
        </member>
        <member name="M:Apq.EventArgsBase.SetItem(System.Int32,System.Object)">
            <summary>
            设置指定索引位置的值
            </summary>
        </member>
        <member name="T:Apq.EventArgsText">
            <summary>
            事件参数第一项为字符串
            </summary>
        </member>
        <member name="P:Apq.EventArgsText.Text">
            <summary>
            获取或设置事件关联的字符串
            </summary>
        </member>
        <member name="T:Apq.EventArgsIndex">
            <summary>
            事件参数第一项为索引位置，第二项指示是否选中
            </summary>
        </member>
        <member name="P:Apq.EventArgsIndex.Index">
            <summary>
            获取或设置事件关联的索引位置(-2表示未初始化)
            </summary>
        </member>
        <member name="T:Apq.ExceptionWraper">
            <summary>
            异常封装
            </summary>
        </member>
        <member name="M:Apq.ExceptionWraper.#ctor(System.Exception)">
            <summary>
            异常封装
            </summary>
        </member>
        <member name="M:Apq.ExceptionWraper.GetOriginalException(System.Exception)">
            <summary>
            获取原始异常
            </summary>
            <param name="ex"></param>
        </member>
        <member name="M:Apq.ExceptionWraper.GetMessageList(System.Exception,System.Boolean)">
            <summary>
            获取信息列表
            </summary>
            <param name="ex"></param>
            <param name="ContainsStack">是否在异常信息后附上调用堆栈</param>
        </member>
        <member name="P:Apq.ExceptionWraper.Ex">
            <summary>
            获取异常对象
            </summary>
        </member>
        <member name="P:Apq.ExceptionWraper.Level">
            <summary>
            获取或设置异常级别
            </summary>
        </member>
        <member name="P:Apq.ExceptionWraper.OriginalException">
            <summary>
            获取原始异常
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.ExceptionWraper.GetMessageList(System.Boolean)">
            <summary>
            获取信息列表
            </summary>
            <param name="ContainsStack">是否在异常信息后附上调用堆栈</param>
        </member>
        <member name="M:Apq.Extension.Ext_Crontab.GetPreOccurrence(NCrontab.CrontabSchedule,System.Nullable{System.DateTime},System.Nullable{System.DateTime})">
            <summary>
            获取&lt;dt前的最近一次调度时间
            </summary>
            <param name="me"></param>
            <param name="dtEnd">指定时间或当前时间</param>
            <param name="dtBegin">调度区间的起点时间.默认向前推一年.</param>
            <returns>最近一次调度时间,是否成功</returns>
        </member>
        <member name="T:Apq.Extension.Ext_DataSet">
            <summary>
            System.Data中类的基本扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetDataSetColNames(System.Data.Common.DataColumnMappingCollection)">
            <summary>
            获取 DataSet 列名集合
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetSourceColNames(System.Data.Common.DataColumnMappingCollection)">
            <summary>
            获取 Source 列名集合
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.LikeDBNull(System.Data.DataRow)">
            <summary>
            返回一行是否全与 DBNull 具有相似意义
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.EqualsTo(System.Data.DataRow,System.Data.DataRow,System.Boolean)">
            <summary>
            [反射]判断两行是否相等
            </summary>
            <param name="dr1"></param>
            <param name="dr2"></param>
            <param name="ContainsAutoID">是否比较自增列的值</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ToDynamic(System.Data.DataRow,System.Boolean,System.Boolean)">
            <summary>
            转为动态类型(没有进行深复制,多用于实体转换)
            </summary>
            <remarks>
            浅复制，无类型转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetPrimaryValues(System.Data.DataRow)">
            <summary>
            获取主键值
            </summary>
            <param name="dr"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.SetValues(System.Data.DataRow,System.Object[])">
            <summary>
            按顺序给行赋值
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.CopytoNonPrimary(System.Data.DataRow,System.Data.DataRow,System.Collections.Generic.IList{System.String})">
            <summary>
            从另一行中“粘贴”数据到当前行(不复制主键) 对每一列,优先使用Clone方法,不支持则直接赋值
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.Copyto(System.Data.DataRow,System.Data.DataRow,System.Collections.Generic.IList{System.String})">
            <summary>
            复制表中的行 对每一列,优先使用Clone方法,不支持则直接赋值
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.WritePropertiesToDR(System.Object,System.Data.DataRow)">
            <summary>
            [反射]将可读属性写入到DataRow中已存在的对应列
            </summary>
            <remarks>
            浅复制，无类型转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ReadPropertiesFromDR(System.Object,System.Data.DataRow)">
            <summary>
            [反射]从DataRow中加载存在的可写属性
            </summary>
            <remarks>
            浅复制，通用类型转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.WriteToXE(System.Data.DataRow,System.Collections.Generic.IList{System.String},System.Xml.XmlElement)">
            <summary>
            将行写入Xml节点的(属性)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ReadFromXE(System.Data.DataRow,System.Collections.Generic.IList{System.String},System.Xml.XmlElement)">
            <summary>
            从 XmlElement 加载行
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ToXmlString(System.Data.DataRow)">
            <summary>
            将行转换为Xml字符串
            </summary>
            <param name="dr"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetColNames(System.Data.DataTable)">
            <summary>
            获取所有列名
            </summary>
            <param name="dt">表</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetColNamesPrimary(System.Data.DataTable)">
            <summary>
            获取主键列名
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetColNamesNonPrimary(System.Data.DataTable)">
            <summary>
            获取非主键列
            </summary>
            <param name="dt"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.SetDist(System.Data.DataTable,System.Int32,System.String)">
            <summary>
            用给定值设置每一行的分布式结果列(按需自动添加分布式结果列）
            </summary>
            <remarks>
            多用于分布式查询结果集的第一步处理
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.CreateDefaultTableMapping(System.Data.DataTable)">
            <summary>
            生成默认映射表
            </summary>
            <param name="dt">表</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetDistinct(System.Data.DataTable,System.String[])">
            <summary>
            获取不重复列表
            </summary>
            <param name="dv">源表</param>
            <param name="Columns">列名列表</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.CloneToStringTable(System.Data.DataTable)">
            <summary>
            创建一个与源表 列名相同，列类型为字符串 的空表
            </summary>
            <param name="dtSrc">源表</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ExportToText(System.Data.DataTable,System.String,System.String,System.String,System.Boolean)">
            <summary>
            导出到文本文件
            </summary>
            <param name="dt">表</param>
            <param name="FileName"></param>
            <param name="strColSpliter">列分隔符</param>
            <param name="strRowSpliter">行分隔符</param>
            <param name="ContainsColName">是否包含列名</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ToDynamicObservableCollection(System.Data.DataTable)">
            <summary>
            转换为ObservableCollection,子项为dynamic类型
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ToObservableCollection``1(System.Data.DataTable)">
            <summary>  
            [反射]转换为ObservableCollection
            </summary>  
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.MergeObservableCollection``1(System.Data.DataTable,System.Collections.ObjectModel.ObservableCollection{``0})">
            <summary>
            将ObservableCollection合并到表中
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.MergeBoth(System.Data.DataTable,System.Data.DataTable)">
            <summary>
            双向合并(表名相同)
            同名列合并,缺失列设为DBNull
            </summary>
            <returns>合并结果表</returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ContainsRow(System.Data.DataTable,System.Data.DataRow,System.Data.DataRow@,System.Boolean)">
            <summary>
            返回表里是否已包含具有指定行值的行。包含时输出找到的等值行。
            </summary>
            <param name="dt"></param>
            <param name="dr"></param>
            <param name="drFind">输出等值行,不包含时输出为null</param>
            <param name="CompareAutoID">是否比较自增列</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetRootRows(System.Data.DataTable,System.String,System.String)">
            <summary>
            获取根行
            </summary>
            <param name="dt">表</param>
            <param name="Key">主键列名(单列)</param>
            <param name="Parent">上级列名(单列)</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.WriteToTreeXE(System.Data.DataTable,System.Collections.Generic.IList{System.String},System.String,System.String,System.Xml.XmlElement,System.String,System.String)">
            <summary>
            写入到 XmlElement(树)
            </summary>
            <param name="dt">表</param>
            <param name="Columns">需要的列名列表</param>
            <param name="Key">主键列名(单列)</param>
            <param name="Parent">上级列名(单列)</param>
            <param name="xnVRoot">xnVRoot</param>
            <param name="tag">结点名</param>
            <param name="RootsFilter">根行筛选</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ReadFromTreeXE(System.Data.DataTable,System.Collections.Generic.IList{System.String},System.String,System.String,System.Xml.XmlElement)">
            <summary>
            从 XmlElement(树) 加载表
            </summary>
            <param name="dt">表</param>
            <param name="Columns">需要的列名列表</param>
            <param name="Key">主键列名(一列)</param>
            <param name="Parent">上级列名(一列)</param>
            <param name="xeVRoot">xnVRoot</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.CreateDefaultMapping(System.Data.DataSet)">
            <summary>
            创建默认表列映射
            </summary>
            <param name="ds"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.BuildupTabelForMaxrow(System.Data.DataSet,System.Int32)">
            <summary>
            按最大行数限制组织表(新建表,转移数据,新表名为原表名+"-"+编号)
            </summary>
            <param name="ds"></param>
            <param name="Maxrow">每个表最大行数</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ExportToText(System.Data.DataSet,System.String,System.String,System.String,System.Boolean)">
            <summary>
            [追加]导出指定表到文本文件
            </summary>
            <param name="ds"></param>
            <param name="FileName"></param>
            <param name="strColSpliter">列分隔符</param>
            <param name="strRowSpliter">行分隔符</param>
            <param name="ContainsColName">是否包含列名</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.MergeBoth(System.Data.DataSet,System.Data.DataSet)">
            <summary>
            双向合并
            同名表进行合并,不存在则复制到输出中
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetColNames(System.Data.DataView)">
            <summary>
            获取所有列名
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetColNamesPrimary(System.Data.DataView)">
            <summary>
            获取主键列名
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetColNamesNonPrimary(System.Data.DataView)">
            <summary>
            获取非主键列
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.SetDist(System.Data.DataView,System.Int32,System.String)">
            <summary>
            用给定值设置每一行的分布式结果列(按需自动添加分布式结果列）
            </summary>
            <remarks>
            多用于分布式查询结果集的第一步处理
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.GetDistinct(System.Data.DataView,System.String[])">
            <summary>
            获取不重复列表
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.CloneToStringTable(System.Data.DataView)">
            <summary>
            创建一个与源表 列名相同，列类型为字符串 的空表
            </summary>
            <param name="dv">源表</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ExportToText(System.Data.DataView,System.String,System.String,System.String,System.Boolean)">
            <summary>
            导出到文本文件
            </summary>
            <param name="dv">表</param>
            <param name="FileName"></param>
            <param name="strColSpliter">列分隔符</param>
            <param name="strRowSpliter">行分隔符</param>
            <param name="ContainsColName">是否包含列名</param>
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.ToObservableCollection``1(System.Data.DataView)">
            <summary>  
            [反射]转换为ObservableCollection
            </summary>  
        </member>
        <member name="M:Apq.Extension.Ext_DataSet.FindRows(System.Data.DataView,System.String)">
            <summary>
            返回满足条件的行列表(在DataView上再次过滤)
            </summary>
        </member>
        <member name="T:Apq.Extension.Ext_DateTime">
            <summary>
            DateTime扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DateTime.GetCppDateTime(System.DateTime,System.TimeZoneInfo)">
            <summary>
            获取对应的C++时间(数值)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DateTime.ToDateTimeFromCppDateTime(System.Double,System.TimeZoneInfo)">
            <summary>
            按C++时间(数值)获取对应的C#时间(DateTime)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToCSType(System.Data.DbType)">
            <summary>
            其中：DbType ==&gt; CS
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToDbType(System.Type)">
            <summary>
            其中：CS ==&gt; DbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.Reg_NL">
            <remarks>
            Pattern:<br/>
            <code>\\r|\\n</code><br/>
            Options:<br/>
            <code>RegexOptions.IgnoreCase | RegexOptions.Compiled</code><br/>
            Explanation:<br/>
            <code>
            ○ Match a character in the set [\n\r].<br/>
            </code>
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DB.Reg_s">
            <remarks>
            Pattern:<br/>
            <code>\\s+</code><br/>
            Options:<br/>
            <code>RegexOptions.IgnoreCase | RegexOptions.Compiled</code><br/>
            Explanation:<br/>
            <code>
            ○ Match a whitespace character atomically at least once.<br/>
            </code>
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DB.Reg_GO">
            <remarks>
            Pattern:<br/>
            <code>^GO$</code><br/>
            Options:<br/>
            <code>RegexOptions.IgnoreCase | RegexOptions.Multiline | RegexOptions.Compiled</code><br/>
            Explanation:<br/>
            <code>
            ○ Match if at the beginning of a line.<br/>
            ○ Match a character in the set [Gg].<br/>
            ○ Match a character in the set [Oo].<br/>
            ○ Match if at the end of a line.<br/>
            </code>
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DB.Reg_GONL">
            <remarks>
            Pattern:<br/>
            <code>(\\\\r|\\\\n|;)GO(;|\\\\r|\\\\n)</code><br/>
            Options:<br/>
            <code>RegexOptions.IgnoreCase | RegexOptions.Compiled</code><br/>
            Explanation:<br/>
            <code>
            ○ 1st capture group.<br/>
                ○ Match with 2 alternative expressions.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match '\\'.<br/>
                        ○ Match a character in the set [NRnr].<br/>
                    ○ Match ';'.<br/>
            ○ Match a character in the set [Gg].<br/>
            ○ Match a character in the set [Oo].<br/>
            ○ 2nd capture group.<br/>
                ○ Match with 2 alternative expressions, atomically.<br/>
                    ○ Match ';'.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match '\\'.<br/>
                        ○ Match a character in the set [NRnr].<br/>
            </code>
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DB.MaybeSqlInjection(System.String)">
            <summary>
            判断SQL注入的可能性
            </summary>
            <param name="me">应该是从不可信任来源传入的字符串(比如：客户端)</param>
        </member>
        <member name="M:Apq.Extension.Ext_DB.EraseSqlInjection(System.String,System.Boolean,System.Boolean)">
            <summary>
            去掉可能是SQL注入的字符
            </summary>
            <param name="me">应该是从不可信任来源传入的字符串(比如：客户端)</param>
            <param name="RemoveNewLine">是否移除换行(\r和\n)</param>
            <param name="RemoveWhiteSpaces">是否移除所有空白字符</param>
            <remarks>默认替换字符串中的'为两个''、去掉单行GO、去掉分号</remarks>
        </member>
        <member name="M:Apq.Extension.Ext_DB.AsNameInMsSql(System.String)">
            <summary>
            防注入并转为MsSql的合法名称(替换字符串中的'为两个''、去掉单行GO、去掉分号、去掉回车换行、去掉空)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToSqlON(System.ValueType,System.Data.DbType)">
            <summary>
            转换为SqlON串
            </summary>
            <param name="DbT">已支持类型受限于下级方法实现</param>
            <param name="me"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToSqlON(System.Data.DataRow)">
            <summary>
            转换为SqlON串
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToSqlON(System.String,System.Data.DbType)">
            <summary>
            转换为SqlON串
            </summary>
            <param name="DbT">{Char,DateTime,NChar,NText,NVarChar,SmallDateTime,Text,UniqueIdentifier,VarChar}</param>
            <param name="me"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToSqlON(System.Object)">
            <summary>
            转换为SqlON串
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToSqlON(System.Object,System.Data.DbType)">
            <summary>
            转换为SqlON串
            </summary>
            <param name="DbT">已支持类型受限于下级方法实现</param>
            <param name="me"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ConvertToSqlON(System.Data.DbType,System.Byte[])">
            <summary>
            转换为SqlON串
            </summary>
            <param name="DbT">{Binary,Bit,Image,Variant,UniqueIdentifier}</param>
            <param name="ary"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DB.GuessDbType(System.String)">
            <summary>
            根据SqlON串,解析出对应的DbType(猜测)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.TryParseSqlON(System.String,System.Object@)">
            <summary>
            解析 SqlON 对象
            </summary>
            <param name="rtn">解析出来的结果</param>
            <param name="me">来源 SqlON 字符串</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ExportSql(System.Object[])">
            <summary>
            导出行语句(不含括号)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ExportSql(System.Data.DataRow)">
            <summary>
            导出行语句(不含括号)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ExportSql(System.Data.DataTable,System.String,System.Boolean)">
            <summary>
            导出行语句(含括号)
            </summary>
            <param name="me"></param>
            <param name="Insert">给定“INSERT INTO table_name(colList) VALUES”</param>
            <param name="IsBatch">输出语句是否为批量添加(速度快)</param>
        </member>
        <member name="M:Apq.Extension.Ext_DB.AddParameter(System.Data.Common.DbCommand,System.Data.Common.DbParameter)">
            <summary>
            [覆盖添加]添加参数
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.AddParameter(System.Data.Common.DbCommand,System.String,System.Object)">
            <summary>
            [覆盖添加]添加参数
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.AddParameter(System.Data.Common.DbCommand,System.String,System.Object,System.Data.DbType)">
            <summary>
            [覆盖添加]添加参数
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.AddParameter(System.Data.Common.DbCommand,System.String,System.Object,System.Data.DbType,System.Int32)">
            <summary>
            [覆盖添加]添加参数
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.Open_Ensure(System.Data.Common.DbConnection)">
            <summary>
            [可重入]打开连接
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.Close_Ensure(System.Data.Common.DbConnection)">
            <summary>
            [可重入]关闭连接
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.CreateAdapter(System.Data.Common.DbConnection,System.String)">
            <summary>
            [反射]创建 DataAdapter
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.ExecuteCount(System.Data.Common.DbConnection,System.String,System.String)">
            <summary>
            从数据库查询单表总条数
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.CreateCommand(System.Data.Common.DbDataAdapter,System.String)">
            <summary>
            [反射]创建 DbCommand
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_DB.AddParameter(System.Data.Common.DbCommand,System.Boolean,System.String,System.String,System.Data.DataRowVersion,System.Data.DbType,System.Data.ParameterDirection,System.Int32,System.Byte,System.Byte)">
            <summary>
            给DbCommand添加参数
            </summary>
            <param name="me"></param>
            <param name="SourceColumnNullMapping">数据库是否允许为空</param>
            <param name="ParameterName">参数名</param>
            <param name="SourceColumn">对应的DataTable中的列名</param>
            <param name="SourceVersion">从DataRow中取值时，取哪个版本的值</param>
            <param name="DbType">数据库中的数据类型</param>
            <param name="Size">数据库中数据类型的大小(长度)</param>
            <param name="Precision">数据库中数据类型的精度</param>
            <param name="Scale">数据库中数据类型的小数位数</param>
            <param name="Direction">参数方向(Input/Output)</param>
        </member>
        <member name="P:Apq.Extension.DBBase.NonSupportedInType">
            <summary>
            对于不支持的来源类型返回的默认值
            </summary>
        </member>
        <member name="P:Apq.Extension.DBBase.NonSupportedOutType">
            <summary>
            对于不支持的目标类型返回的默认值
            </summary>
        </member>
        <member name="P:Apq.Extension.DBBase.htDbToCS">
            <summary>
            获取数据库类型与C#类型的对应表
            </summary>
        </member>
        <member name="M:Apq.Extension.DBBase.GetCSType(System.Data.DbType)">
            <summary>
            获取数据库类型对应的C#类型
            </summary>
            <param name="sdt"></param>
            <returns></returns>
        </member>
        <member name="P:Apq.Extension.DBBase.htCSToDb">
            <summary>
            获取C#类型与数据库类型的对应表
            </summary>
        </member>
        <member name="M:Apq.Extension.DBBase.GetDbType(System.Type)">
            <summary>
            获取C#类型对应的数据库类型
            </summary>
            <param name="t"></param>
            <returns></returns>
        </member>
        <member name="T:Apq.Extension.Ext_Delegate">
            <summary>
            在全局变量中保存已暂停的代理，可用于触发事件前判断。
            并不能改变代理和事件的默认功能。需要在事件处理代理中进行判断，已暂停则不处理了。
            </summary>
        </member>
        <member name="F:Apq.Extension.Ext_Delegate.m_EventSuspend">
            <summary>
            表示已暂停处理的代理
            </summary>
        </member>
        <member name="T:Apq.Extension.Ext_EF">
            <summary>
            EF的扩展方法
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_EF.ExecuteSqlCommand(System.Data.Entity.Database,System.Collections.Generic.IList{System.Tuple{System.String,System.Data.Common.DbParameter[]}})">
            <summary>
            执行多条sql语句
            </summary>
        </member>
        <member name="T:Apq.Extension.Ext_Enum">
            <summary>
            枚举扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Enum.GetName(System.Enum)">
            <summary>
            获取枚举名称
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Enum.ParseName``1(System.String)">
            <summary>
            根据名称获取指定类型的枚举实例
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Enum.GetValue(System.String,System.String,System.Reflection.Assembly)">
            <summary>
            根据枚举类型和枚举名称获取指定类型的枚举值
            </summary>
            <returns>返回null表示未找到枚举名称</returns>
        </member>
        <member name="M:Apq.Extension.Ext_Enum.GetDescription(System.Enum,System.Boolean)">
            <summary>
            获取枚举描述(DescriptionAttribute)
            </summary>
            <param name="eff">枚举值</param>
            <param name="orName">未定义描述时使用名称代替</param>
        </member>
        <member name="T:Apq.Extension.Ext_EventSuspend">
            <summary>
            EventSuspend扩展
            </summary>
        </member>
        <member name="P:Apq.Extension.Ext_EventSuspend.EventSuspend">
            <summary>
            保存已暂停的事件(用对象和成员名称指定)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_EventSuspend.Contains(Apq.Collections.IListWapper{Apq.CSMember},System.Object,System.String)">
            <summary>
            此扩展将包含判断扩展为两次,1 按指定名称 2 使用空名称,只要有一次判断为true,则返回true,否则为false
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_EventSuspend.Add(Apq.Collections.IListWapper{Apq.CSMember},System.Object,System.String)">
            <summary>
            添加
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_EventSuspend.Remove(Apq.Collections.IListWapper{Apq.CSMember},System.Object,System.String)">
            <summary>
            移除子项。没有找到 item，该方法也会返回 false
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_ExpandoObject.ContainsInTree(System.Dynamic.ExpandoObject,System.String)">
            <summary>
            ExpandoObject树结构中是否存在指定属性
            </summary>
            <param name="expando"></param>
            <param name="propertyName">属性名。可以包含"."进行下层访问。</param>
            <returns>如果包含"."，则必须所有层级的属性都存在才是true</returns>
        </member>
        <member name="M:Apq.Extension.Ext_ExpandoObject.GetInTree(System.Dynamic.ExpandoObject,System.String)">
            <summary>
            从ExpandoObject树结构中读取属性值
            </summary>
            <param name="expando"></param>
            <param name="propertyName">属性名。可以包含"."进行下层访问。</param>
            <returns>不存在此属性时返回null</returns>
        </member>
        <member name="M:Apq.Extension.Ext_ExpandoObject.SetInTree(System.Dynamic.ExpandoObject,System.String,System.Object)">
            <summary>
            在ExpandoObject树结构中设置属性值
            </summary>
            <param name="expando"></param>
            <param name="propertyName">属性名。可以包含"."进行下层访问。</param>
            <param name="value">属性值</param>
        </member>
        <member name="T:Apq.Extension.Ext_ICollection">
            <summary>
            ICollection&lt;T&gt;扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_ICollection.Reset``2(System.Collections.Generic.ICollection{``0},System.Collections.Generic.IEnumerable{``1},System.Func{``1,``0})">
            <summary>
            用另一个集合重置当前集合。
            </summary>
            <typeparam name="T">目标类型</typeparam>
            <typeparam name="TSrc">来源类型</typeparam>
            <param name="lst">当前集合</param>
            <param name="list">来源集合</param>
            <param name="create">提供创建目标类型对象的方法</param>
        </member>
        <member name="T:Apq.Extension.Ext_IEnumerable">
            <summary>
            IEnumerable扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_IEnumerable.Contains(System.Collections.IEnumerable,System.Object)">
            <summary>
            返回列表中是否包含指定项(支持null)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_IEnumerable.GetRootItemType(System.Collections.IEnumerable)">
            <summary>
            获取所有子项(item)的根类(可以使用该类型引用指向任一子项)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_IEnumerable.CopyToDataTable(System.Collections.IEnumerable,System.Data.DataTable)">
            <summary>
            复制数据到DataTable中(仅添加,会自动补全所有可读属性的列)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_IEnumerable.ConvertToDataTable(System.Collections.IEnumerable)">
            <summary>
            转换为DataTable
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_IEnumerable.ToFixedList``1(System.Collections.Generic.IEnumerable{``0},System.Int32)">
            <summary>
            转为指定长度的倍数长度的列表,长度不足时尾部补默认值
            </summary>
            <remarks>主要用于字节数组</remarks>
        </member>
        <member name="M:Apq.Extension.Ext_IEnumerable.Map``2(System.Collections.Generic.IEnumerable{``0},System.Converter{``0,``1})">
            <summary>
            用指定类型转换方法，对每一项进行类型转换，返回新的列表(模仿jQuery,不包含转换结果为null的项)
            </summary>
        </member>
        <member name="T:Apq.Extension.Ext_IList">
            <summary>
            List类基本扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_IList.AddUnique(System.Collections.IList,System.Object)">
            <summary>
            将某项添加到 System.Collections.Generic.IList 中，该项唯一。
            </summary>
            <returns>新项的插入位置。</returns>
        </member>
        <member name="M:Apq.Extension.Ext_IList.IndexOf_ByCycle``1(System.Collections.Generic.IList{``0},System.Int32)">
            <summary>
            按循环索引获取子项
            </summary>
        </member>
        <member name="T:Apq.Extension.Ext_Json">
            <summary>
            Json串的扩展方法
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Json.ToJsonStr(System.Object)">
            <summary>
            转为json字符串
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Json.FromJsonStr(System.String)">
            <summary>
            json字符串转为C#对象(字典、列表、值)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Json.ToJList(Newtonsoft.Json.Linq.JArray)">
            <summary>
            转为列表
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Json.ToJDic(Newtonsoft.Json.Linq.JObject)">
            <summary>
            转为字典
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Json.DeepCloneByJson``1(``0)">
            <summary>
            基于Json互转的深复制
            </summary>
        </member>
        <member name="T:Apq.Extension.Ext_MsSql">
            <summary>
            用于MsSql的扩展方法
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToSqlDbType(System.Data.DbType)">
            <summary>
            DbType ==&gt; SqlDbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToDbType(System.Data.SqlDbType)">
            <summary>
            SqlDbType ==&gt; DbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToCSType(System.Data.SqlDbType)">
            <summary>
            SqlDbType ==&gt; CS
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToSqlDbType(System.Type)">
            <summary>
            CS ==&gt; SqlDbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToMsSqlON(System.ValueType,System.Data.SqlDbType)">
            <summary>
            转换为SqlON串
            </summary>
            <param name="sdt">已支持类型受限于下级方法实现</param>
            <param name="me"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToMsSqlON(System.Data.DataRow)">
            <summary>
            转换为SqlON串
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToMsSqlON(System.String,System.Data.SqlDbType)">
            <summary>
            转换为SqlON串
            </summary>
            <param name="sdt">{Char,DateTime,NChar,NText,NVarChar,SmallDateTime,Text,UniqueIdentifier,VarChar}</param>
            <param name="me"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToMsSqlON(System.Object)">
            <summary>
            转换为SqlON串
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToMsSqlON(System.Object,System.Data.SqlDbType)">
            <summary>
            转换为SqlON串
            </summary>
            <param name="sdt">已支持类型受限于下级方法实现</param>
            <param name="me"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.ConvertToMsSqlON(System.Data.SqlDbType,System.Byte[])">
            <summary>
            转换为SqlON串
            </summary>
            <param name="sdt">{Binary,Bit,Image,Variant,UniqueIdentifier}</param>
            <param name="ary"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.GuessSqlDbType(System.String)">
            <summary>
            根据SqlON串,解析出对应的SqlDbType(猜测)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.TryParseMsSqlON(System.String,System.Object@)">
            <summary>
            解析 SqlON 对象
            </summary>
            <param name="rtn">解析出来的结果</param>
            <param name="me">来源 SqlON 字符串</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_MsSql.CreateMsSqlConnection(System.String,System.Int32,System.String,System.String,System.String,System.String,System.String)">
            <summary>
            创建MsSql连接对象
            </summary>
            <param name="Server"></param>
            <param name="Port"></param>
            <param name="Uid"></param>
            <param name="Pwd"></param>
            <param name="dbName"></param>
            <param name="Option"></param>
            <param name="AppName">客户端程序名称</param>
            <returns></returns>
        </member>
        <member name="P:Apq.Extension.DB_MsSql.htSqlToDb">
            <summary>
            获取SqlDbType ==&gt; DbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MsSql.GetDbType(System.Data.SqlDbType)">
            <summary>
            获取获取SqlDbType对应的DbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MsSql.htDbToSql">
            <summary>
            获取DbType ==&gt; SqlDbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MsSql.GetSqlDbType(System.Data.DbType)">
            <summary>
            获取DbType对应的SqlDbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MsSql.htSqlToCS">
            <summary>
            获取SqlDbType ==&gt; C#类型 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MsSql.GetCSType(System.Data.SqlDbType)">
            <summary>
            获取SqlDbType对应的C#类型
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MsSql.htCSToSql">
            <summary>
            获取C#类型 ==&gt; SqlDbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MsSql.GetSqlDbType(System.Type)">
            <summary>
            获取C#类型对应的SqlDbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MsSql.htMsSqlToCS">
            <summary>
            获取SqlDbType ==&gt; C#类型 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MsSql.GetCSType(Apq.DB.MsSql.MsSqlType)">
            <summary>
            获取MsSqlType对应的C#类型
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MsSql.htCSToMsSql">
            <summary>
            获取C#类型 ==&gt; MsSqlType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MsSql.GetMsSqlType(System.Type)">
            <summary>
            获取C#类型对应的MsSqlType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MySql.ConvertToMySqlDbType(System.Data.DbType)">
            <summary>
            DbType ==&gt; MySqlDbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MySql.ConvertToDbType(MySql.Data.MySqlClient.MySqlDbType)">
            <summary>
            MySqlDbType ==&gt; DbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MySql.ConvertToCSType(MySql.Data.MySqlClient.MySqlDbType)">
            <summary>
            MySqlDbType ==&gt; CS
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_MySql.ConvertToMySqlDbType(System.Type)">
            <summary>
            CS ==&gt; MySqlDbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MySql.htMySqlToDb">
            <summary>
            获取MySqlDbType ==&gt; DbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MySql.GetDbType(MySql.Data.MySqlClient.MySqlDbType)">
            <summary>
            获取获取MySqlDbType对应的DbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MySql.htDbToMySql">
            <summary>
            获取DbType ==&gt; MySqlDbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MySql.GetMySqlDbType(System.Data.DbType)">
            <summary>
            获取DbType对应的MySqlDbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_MySql.htMySqlToCS">
            <summary>
            获取MySql数据库类型与C#类型的对应表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MySql.GetCSType(MySql.Data.MySqlClient.MySqlDbType)">
            <summary>
            获取数据库类型对应的C#类型
            </summary>
            <param name="mdt"></param>
            <returns></returns>
        </member>
        <member name="P:Apq.Extension.DB_MySql.htCSToMySql">
            <summary>
            获取C#类型与MySql数据库类型的对应表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_MySql.GetMySqlDbType(System.Type)">
            <summary>
            获取C#类型对应的MySql数据库类型
            </summary>
            <param name="t"></param>
            <returns></returns>
        </member>
        <member name="T:Apq.Extension.Ext_NameValueCollection">
            <summary>
            NameValueCollection扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_NameValueCollection.ToDynamic(System.Collections.Specialized.NameValueCollection,System.Boolean,System.Boolean)">
            <summary>
            转为动态类型
            </summary>
            <remarks>
            浅复制，无类型转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_NameValueCollection.ToPostContent(System.Collections.Specialized.NameValueCollection,System.Boolean,System.Boolean,System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String})">
            <summary>
            转为字节数组(用于Post)
            </summary>
            <param name="encoding"></param>
            <param name="encodeQuery">提供编码或解码算法。默认使用 Encoder.UrlEncode</param>
        </member>
        <member name="T:Apq.Extension.Ext_Object">
            <summary>
            [反射]System.Object的基础扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Object.GetOriginValueInNullable(System.Object)">
            <summary>
            取出可空类型的原始值与类型
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Object.LikeDBNull(System.Object)">
            <summary>
            返回指定对象是否与 DBNull 具有相似意义[仿JScrip]{null,DBNull,string.Empty}
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_Object.IsNull(System.Object)">
            <summary>
            返回指定对象是否为null{null,DBNull}
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_Object.IsNull_Cast(System.Object,System.Type)">
            <summary>
            返回指定对象转换为目标类型时是否应视为null{null,DBNull}
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_Object.HasMean(System.Object)">
            <summary>
            返回指定对象是否有意义,不为{null,DBNull,string.Empty,false}
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_Object.SetPropertyValue(System.Object,System.String,System.Object)">
            <summary>
            [反射]设置对象中指定属性的值
            </summary>
            <remarks>
            浅复制，无类型转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_Object.GetPropertyValue(System.Object,System.String)">
            <summary>
            [反射]获取对象中指定属性的值
            </summary>
            <remarks>
            浅复制，无类型转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_Object.GetPropertyValues(System.Object,System.Collections.Generic.IList{System.String})">
            <summary>
            [反射]获取对象中指定属性的值(数组)
            </summary>
            <remarks>
            浅复制，无类型转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_Object.ToDic(System.Object,System.Boolean,System.Boolean)">
            <summary>
            [递归]转为字典类型[Dictionary&lt;string, object?&gt;](只取可读属性和字段,浅复制,无类型转换)
            </summary>
            <remarks>
            主要用于匿名实例和EF查询里的实体转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_Object.FromDic(System.Object,System.Collections.Generic.IDictionary{System.String,System.Object})">
            <summary>
            [递归]从字典中加载可写属性和字段值
            </summary>
            <param name="dic"></param>
        </member>
        <member name="M:Apq.Extension.Ext_Object.ToDynamic(System.Object,System.Boolean,System.Boolean)">
            <summary>
            [递归]转为动态类型[ExpandoObject](只取可读属性和字段,浅复制,无类型转换)
            </summary>
            <remarks>
            主要用于匿名实例和EF查询里的实体转换
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_Object.FromDynamic(System.Object,System.Dynamic.ExpandoObject)">
            <summary>
            [递归]从动态类型[ExpandoObject]中加载可写属性和字段值
            </summary>
            <param name="dic"></param>
        </member>
        <member name="M:Apq.Extension.Ext_Object.ToString_Fast(System.Object,System.String)">
            <summary>
            快速转换为字符串（支持类型有限）
            </summary>
            <param name="obj">原始对象</param>
            <param name="failedString">转换失败时返回此参数值</param>
        </member>
        <member name="T:Apq.Extension.Ext_ObservableCollection">
            <summary>
            ObservableCollection泛型集合基本扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_ObservableCollection.Sort``1(System.Collections.ObjectModel.ObservableCollection{``0})">
            <summary>
            默认排序
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_ObservableCollection.Sort``1(System.Collections.ObjectModel.ObservableCollection{``0},System.Collections.Generic.IComparer{``0})">
            <summary>
            按指定比较方法排序
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Oracle.ConvertToOracleDbType(System.Data.DbType)">
            <summary>
            DbType ==&gt; OracleDbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Oracle.ConvertToDbType(Oracle.ManagedDataAccess.Client.OracleDbType)">
            <summary>
            OracleDbType ==&gt; DbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Oracle.ConvertToCSType(Oracle.ManagedDataAccess.Client.OracleDbType)">
            <summary>
            OracleDbType ==&gt; CS
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Oracle.ConvertToOracleDbType(System.Type)">
            <summary>
            CS ==&gt; OracleDbType
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Oracle.CreateOracleConnection(System.String,System.Int32,System.String,System.String,System.String)">
            <summary>
            创建Oracle连接对象
            </summary>
            <param name="Server"></param>
            <param name="Port"></param>
            <param name="Uid"></param>
            <param name="Pwd"></param>
            <param name="dbName"></param>
            <returns></returns>
        </member>
        <member name="P:Apq.Extension.DB_Oracle.htOracleToDb">
            <summary>
            OracleDbType ==&gt; DbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_Oracle.GetDbType(Oracle.ManagedDataAccess.Client.OracleDbType)">
            <summary>
            获取获取OracleDbType对应的DbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_Oracle.htDbToOracle">
            <summary>
            获取DbType ==&gt; OracleDbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_Oracle.GetOracleDbType(System.Data.DbType)">
            <summary>
            获取DbType对应的OracleDbType
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_Oracle.htOracleToCS">
            <summary>
            获取OracleDbType ==&gt; C#类型 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_Oracle.GetCSType(Oracle.ManagedDataAccess.Client.OracleDbType)">
            <summary>
            获取OracleDbType对应的C#类型
            </summary>
        </member>
        <member name="P:Apq.Extension.DB_Oracle.htCSToOracle">
            <summary>
            获取C#类型 ==&gt; OracleDbType 的映射表
            </summary>
        </member>
        <member name="M:Apq.Extension.DB_Oracle.GetOracleDbType(System.Type)">
            <summary>
            获取C#类型对应的OracleDbType
            </summary>
        </member>
        <member name="T:Apq.Extension.Ext_Reflection">
            <summary>
            反射扩展
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.IsNullable(System.Type)">
            <summary>
            是否为可空类型
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.IsAnonymous(System.Reflection.MemberInfo)">
            <summary>
            是否为匿名代码(如:匿名类、Lambda块)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetFriendlyName(System.Reflection.MemberInfo)">
            <summary>
            获取友好名称
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.IsCompilerGenerated(System.Type)">
            <summary>
            是否由编译器自动生成
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetClassDeclare(System.Type)">
            <summary>
            获取类的定义
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetNameSpace(System.Type)">
            <summary>
            获取类的命名空间
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetClassNameSelf(System.Type)">
            <summary>
            获取类自己的名称(不含嵌套类的上级类名)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetClassName(System.Type)">
            <summary>
            获取类名(嵌套类包含上级类名)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.IsAsync(System.Reflection.MethodBase)">
            <summary>
            是否为异步方法
            </summary>
            <remarks>感觉不准</remarks>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.IsCompilerGenerated(System.Reflection.MethodBase)">
            <summary>
            是否由编译器自动生成
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetMethodNameDeclare(System.Reflection.MethodBase)">
            <summary>
            获取方法定义所在的类和方法名(不含泛型的形参列表)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetMethodName(System.Reflection.MethodBase)">
            <summary>
            获取方法定义所在的命名空间、类名和方法名
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetDelegateReturnType(System.Type)">
            <summary>
            获取委托的返回类型
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetDelegateParameterTypes(System.Type)">
            <summary>
            获取委托的参数类型列表
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.FomatNameForCSV(System.String)">
            <summary>
            将名称中的英文逗号换为中文逗号
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetAllFields(System.Type,System.Reflection.BindingFlags,System.Collections.Generic.IEnumerable{System.String})">
            <summary>
            获取继承层次中的所有字段
            </summary>
            <param name="me">当前类型</param>
            <param name="flags">标志</param>
            <param name="names">字段名范围</param>
        </member>
        <member name="M:Apq.Extension.Ext_Reflection.GetAllProperties(System.Type,System.Reflection.BindingFlags,System.Collections.Generic.IEnumerable{System.String})">
            <summary>
            获取继承层次中的所有属性
            </summary>
            <param name="me">当前类型</param>
            <param name="flags">标志</param>
            <param name="names">字段名范围</param>
        </member>
        <member name="M:Apq.Extension.Ext_Stream.SaveToFile(System.IO.Stream,System.String)">
            <summary>
            将流写成文件(如何文件已存在,则覆盖)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.RemoveWhiteSpaces(System.String)">
            <summary>
            移除所有空白或不可见字符
            </summary>
            <param name="me"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Extension.Ext_String.IndexOf(System.String,System.Collections.Generic.IEnumerable{System.String})">
            <summary>
            查找所有子串出现的位置
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.Repeate(System.String,System.Int32)">
            <summary>
            字符串重复count次(0次就是string.Empty)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.GetRange(System.String,System.Int32,System.Int32)">
            <summary>
            按索引范围取子串[idxBegin,idxEnd)
            </summary>
            <returns>尽量按范围取(范围无效时返回string.Empty)</returns>
        </member>
        <member name="M:Apq.Extension.Ext_String.IsInt(System.String)">
            <summary>
            字符串是否为十进制整数(可包含正负号[开头允许有一个],小数点[仅结尾可有])(不是使用正则表达式)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.IsNum(System.String)">
            <summary>
            字符串是否为十进制数值(可包含正负号[开头允许有一个],小数点[最多一个])(不是使用正则表达式)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.GetFirstMeaningfulString(System.String[])">
            <summary>
            模仿??操作符，取列表中第一个有意义的字符串，全无意则取最后一个值。（无意义：null, 空白字符串[Empty,WhiteSpace]）
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.MaybeSqlInjection(System.String)">
            <summary>
            判断字符串是否可能是SQL注入(包含以下字符:";","'","--","/*","*/","xp_")
            </summary>
            <param name="me">应该是从不可信任来源传入的字符串(比如：客户端)</param>
        </member>
        <member name="M:Apq.Extension.Ext_String.Regex_Cn">
            <remarks>
            Pattern:<br/>
            <code>[\\u4E00-\\u9FFF]+</code><br/>
            Options:<br/>
            <code>RegexOptions.IgnoreCase</code><br/>
            Explanation:<br/>
            <code>
            ○ Match a character in the set [\u4E00-\u9FFF] atomically at least once.<br/>
            </code>
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_String.GetChineseWord(System.String)">
            <summary>
            提取中文(连在一起)
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.Regex_IP4">
            <remarks>
            Pattern:<br/>
            <code>^(25[0-5]|2[0-4]\\d|[0-1]\\d{2}|[1-9]?\\d)\\.(25[0-5]|2[0-4]\\d|[0-1]\\d{2}|[1-9]?\\d)\\.(25[0-5]|2[0-4]\\d|[0-1]\\d{2}|[1-9]?\\d)\\.(25[0-5]|2[0-4]\\d|[0-1]\\d{2}|[1-9]?\\d)$</code><br/>
            Explanation:<br/>
            <code>
            ○ Match if at the beginning of the string.<br/>
            ○ 1st capture group.<br/>
                ○ Match with 3 alternative expressions.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match '2'.<br/>
                        ○ Match with 2 alternative expressions.<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match '5'.<br/>
                                ○ Match a character in the set [0-5].<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match a character in the set [0-4].<br/>
                                ○ Match a Unicode digit.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [01].<br/>
                        ○ Match a Unicode digit exactly 2 times.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [1-9] greedily, optionally.<br/>
                        ○ Match a Unicode digit.<br/>
            ○ Match '.'.<br/>
            ○ 2nd capture group.<br/>
                ○ Match with 3 alternative expressions.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match '2'.<br/>
                        ○ Match with 2 alternative expressions.<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match '5'.<br/>
                                ○ Match a character in the set [0-5].<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match a character in the set [0-4].<br/>
                                ○ Match a Unicode digit.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [01].<br/>
                        ○ Match a Unicode digit exactly 2 times.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [1-9] greedily, optionally.<br/>
                        ○ Match a Unicode digit.<br/>
            ○ Match '.'.<br/>
            ○ 3rd capture group.<br/>
                ○ Match with 3 alternative expressions.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match '2'.<br/>
                        ○ Match with 2 alternative expressions.<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match '5'.<br/>
                                ○ Match a character in the set [0-5].<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match a character in the set [0-4].<br/>
                                ○ Match a Unicode digit.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [01].<br/>
                        ○ Match a Unicode digit exactly 2 times.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [1-9] greedily, optionally.<br/>
                        ○ Match a Unicode digit.<br/>
            ○ Match '.'.<br/>
            ○ 4th capture group.<br/>
                ○ Match with 3 alternative expressions.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match '2'.<br/>
                        ○ Match with 2 alternative expressions.<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match '5'.<br/>
                                ○ Match a character in the set [0-5].<br/>
                            ○ Match a sequence of expressions.<br/>
                                ○ Match a character in the set [0-4].<br/>
                                ○ Match a Unicode digit.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [01].<br/>
                        ○ Match a Unicode digit exactly 2 times.<br/>
                    ○ Match a sequence of expressions.<br/>
                        ○ Match a character in the set [1-9] greedily, optionally.<br/>
                        ○ Match a Unicode digit.<br/>
            ○ Match if at the end of the string or if before an ending newline.<br/>
            </code>
            </remarks>
        </member>
        <member name="M:Apq.Extension.Ext_String.IsIP4(System.String)">
            <summary>
            判断字符串是否为IP4
            </summary>
        </member>
        <member name="M:Apq.Extension.Ext_String.DivestNum``1(System.String,System.Collections.Generic.List{``0}@,System.Collections.Generic.List{System.String}@,System.String[],System.StringSplitOptions)">
            <summary>
            从字符串中剥离数字。按拆分点提取为 字符串列表 与 数字串(转为数值)列表
            </summary>
        </member>
        <member name="T:Apq.GlobalObject">
            <summary>
            全局对象
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.TheAssembly">
            <summary>
            该程序集
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.TheProcess">
            <summary>
            当前进程
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.EntryFolder">
            <summary>
            当前程序的入口目录。入口程序集(dll或exe)所在目录(以"\"结尾的绝对路径)
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.DllFolder">
            <summary>
            本程序集(dll或exe)所在目录(以"\"结尾的绝对路径)
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.DefaultConfigFolder">
            <summary>
            DefaultConfig目录(以"\"结尾)
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.ConfigFolder">
            <summary>
            Config目录(以"\"结尾)
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.LogFolder">
            <summary>
            日志目录(以"\"结尾)
            </summary>
        </member>
        <member name="P:Apq.GlobalObject.NamedInstances">
            <summary>
            命名实例集合
            </summary>
        </member>
        <member name="M:Apq.GlobalObject.GetOrAddSingleton``1(System.Func{``0})">
            <summary>
            获取或添加单态实例
            </summary>
            <param name="factory">提供创建实例的方法</param>
            <remarks>创建实例后立即自动调用初始化方法(Init)</remarks>
        </member>
        <member name="T:Apq.ISingleton`1">
            <summary>
            表示单态模式(注意实现静态成员)
            </summary>
            <typeparam name="T"></typeparam>
        </member>
        <member name="P:Apq.ISingleton`1.Instance">
            <summary>
            获取单态实例
            </summary>
        </member>
        <member name="M:Apq.ISingleton`1.Init">
            <summary>
            对新创建的实例进行初始化(可以为空方法,实现类应在创建单态实例后立即调用)
            </summary>
        </member>
        <member name="T:Apq.JsonPocoBase">
            <summary>
            Json简单类的抽象基类(用于解析Json结构的类应继承此类)
            </summary>
        </member>
        <!-- Badly formed XML comment ignored for member "T:Apq.log4netHelper" -->
        <member name="M:Apq.log4netHelper.UseConfigFile(System.String)">
            <summary>
            log4net使用自定义配置文件(如果没有同名的用户配置文件,则使用默认配置文件)
            </summary>
            <param name="fileName">配置文件名</param>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="P:Apq.log4netHelper.RollingLoggerName">
            <summary>
            获取或设置滚动日志器名称(配置文件中应使用该名称)
            </summary>
        </member>
        <member name="P:Apq.log4netHelper.MsSqlLoggerName">
            <summary>
            获取或设置MsSql日志器名称(配置文件中应使用该名称)
            </summary>
        </member>
        <member name="P:Apq.log4netHelper.EFRollingLoggerName">
            <summary>
            获取或设置EF滚动日志器名称(配置文件中应使用该名称)
            </summary>
        </member>
        <member name="M:Apq.log4netHelper.Log(log4net.ILog,log4net.Core.Level,System.Object,System.Exception)">
            <summary>
            记录日志
            </summary>
            <param name="me">日志器</param>
            <param name="level">日志级别(有效级别为 Debug Info Warn Error Fatal)</param>
            <param name="message">信息</param>
            <param name="exception">异常对象</param>
            <remarks>该方法未捕获异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.LogToRollingFile(log4net.Core.Level,System.Object,System.Exception)">
            <summary>
            记录日志到滚动文件
            </summary>
            <param name="level">日志级别(有效级别为 Debug Info Warn Error Fatal)</param>
            <param name="message">信息</param>
            <param name="exception">异常对象</param>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.LogToRollingFileAsync(log4net.Core.Level,System.Object,System.Exception)">
            <summary>
            [异步]记录日志到滚动文件
            </summary>
            <param name="level">日志级别(有效级别为 Debug Info Warn Error Fatal)</param>
            <param name="message">信息</param>
            <param name="exception">异常对象</param>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.LogToMsSql(log4net.Core.Level,System.Object,System.Exception)">
            <summary>
            记录日志到数据库
            </summary>
            <param name="level">日志级别(有效级别为 Debug Info Warn Error Fatal)</param>
            <param name="message">信息</param>
            <param name="exception">异常对象</param>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.LogToMsSqlAsync(log4net.Core.Level,System.Object,System.Exception)">
            <summary>
            [异步]记录日志到数据库
            </summary>
            <param name="level">日志级别(有效级别为 Debug Info Warn Error Fatal)</param>
            <param name="message">信息</param>
            <param name="exception">异常对象</param>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.DataBase_Log(System.String)">
            <summary>
            用法:将DbContext.Database.Log的值设置为该方法
            </summary>
        </member>
        <member name="M:Apq.log4netHelper.LogToEFRollingFile(log4net.Core.Level,System.String)">
            <summary>
            记录EF生成的SQL语句到EF滚动文件
            </summary>
            <param name="level">日志级别(有效级别为 Debug Info Warn Error Fatal)</param>
            <param name="sql">SQL语句</param>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.LogToEFRollingFileAsync(log4net.Core.Level,System.String)">
            <summary>
            [异步]记录EF生成的SQL语句到EF滚动文件
            </summary>
            <param name="level">日志级别(有效级别为 Debug Info Warn Error Fatal)</param>
            <param name="sql">SQL语句</param>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.WriteLog(log4net.Core.Level,System.String,System.String,System.Exception)">
            <summary>
            [异步]记录日志到滚动文件(与LogToRollingFileAsync相同)
            </summary>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="M:Apq.log4netHelper.WriteException(System.Exception,System.String,System.String)">
            <summary>
            [异步]记录异常到滚动文件(自动展开下层异常)
            </summary>
            <remarks>该方法不会产生异常</remarks>
        </member>
        <member name="T:Apq.Net.FleckWebSocketServer">
            <summary>
            代表一个已连接到客户端的长连接(服务端)
            </summary>
            <remarks>WebSocket</remarks>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.#ctor(Fleck.IWebSocketConnection)">
            <summary>
            代表一个已连接到客户端的长连接(服务端)
            </summary>
            <remarks>WebSocket</remarks>
        </member>
        <member name="P:Apq.Net.FleckWebSocketServer.WebSocket">
            <summary>
            WebSocket
            </summary>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.BindClientEvents">
            <summary>
            设置Client相关事件的处理
            </summary>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.UnBindClientEvents">
            <summary>
            取消Client相关事件的处理
            </summary>
        </member>
        <member name="P:Apq.Net.FleckWebSocketServer.Connected">
            <summary>
            是否已连接
            </summary>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.CloseClient">
            <summary>
            调用Client的关闭方法
            </summary>
        </member>
        <member name="P:Apq.Net.FleckWebSocketServer.ShouldClose">
            <summary>
            连接是否应该关闭(已空闲过久)
            </summary>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.DoTask_Close(System.String)">
            <summary>
            关闭长连接(实现)
            </summary>
            <returns>是否关闭成功</returns>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.DoTask_Send(System.Collections.Generic.IList{System.Byte},System.Threading.CancellationToken)">
            <summary>
            发送数据到客户端(实现)
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.DoTask_Send(System.String,System.Threading.CancellationToken)">
            <summary>
            发送消息到客户端(实现)
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.FleckWebSocketServer.DoTask_Receive(System.Threading.CancellationToken)">
            <summary>
            任务实现:接收
            </summary>
        </member>
        <member name="T:Apq.Net.HttpClientHelper">
            <summary>
            使用HttpClient进行Http访问
            </summary>
        </member>
        <member name="M:Apq.Net.HttpClientHelper.PostJson(System.String,System.String,System.Collections.Generic.ICollection{System.Collections.Generic.KeyValuePair{System.String,System.String}},System.Text.Encoding,System.Threading.CancellationToken)">
            <summary>
            将json作为Form内容,POST到指定url
            </summary>
            <param name="url"></param>
            <param name="json">参数</param>
            <param name="headers">请求头</param>
            <param name="encodingForm">Form的编码格式</param>
            <param name="cancellationToken"></param>
            <returns>响应串，是否成功</returns>
        </member>
        <member name="M:Apq.Net.HttpClientHelper.GetResponseString(System.String,System.Net.Http.HttpMethod,System.Collections.Generic.ICollection{System.Collections.Generic.KeyValuePair{System.String,System.String}},System.Collections.Generic.ICollection{System.Collections.Generic.KeyValuePair{System.String,System.String}},System.String,System.Boolean,System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String},System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String},System.Threading.CancellationToken)">
            <summary>
            Get请求时,整合参数到url再访问,返回响应串
            </summary>
            <param name="url"></param>
            <param name="method">Get或Post</param>
            <param name="ps">参数</param>
            <param name="headers">请求头</param>
            <param name="contentType">设置内容的ContentType</param>
            <param name="disableCache">是否禁用缓存</param>
            <param name="encodingQuery">Query的编码格式</param>
            <param name="encodeQuery">提供Query的编码或解码算法。默认使用 Encoder.UrlEncode</param>
            <param name="encodingForm">Form的编码格式</param>
            <param name="encodeForm">提供Form的编码或解码算法。默认使用 Encoder.UrlEncode</param>
            <param name="cancellationToken"></param>
            <returns>响应串，是否成功</returns>
        </member>
        <member name="M:Apq.Net.HttpClientHelper.MultipartPostFile(System.String,System.String,System.Byte[],System.Collections.Generic.ICollection{System.Collections.Generic.KeyValuePair{System.String,System.String}},System.Collections.Generic.ICollection{System.Collections.Generic.KeyValuePair{System.String,System.String}},System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String},System.Threading.CancellationToken)">
            <summary>
            上传文件
            </summary>
            <param name="url">上传地址</param>
            <param name="uploadName">文件名</param>
            <param name="fileContent">文件内容</param>
            <param name="ps">参数</param>
            <param name="headers">请求头</param>
            <param name="encodingForm">Form的编码格式</param>
            <param name="encodeForm">提供Form的编码或解码算法。默认使用 Encoder.UrlEncode</param>
            <param name="cancellationToken"></param>
            <returns>响应串，是否成功</returns>
        </member>
        <member name="T:Apq.Net.HttpClientor">
            <summary>
            HttpClient的单态封装
            </summary>
        </member>
        <member name="M:Apq.Net.HttpClientor.Init">
            <summary>
            对新创建的实例进行初始化(可以为空方法,实现类应在创建单态实例后立即调用)
            </summary>
        </member>
        <member name="F:Apq.Net.HttpClientor._lazyClient">
            <summary>
            用于延迟创建对象(延迟到首次使用其Value属性时)
            </summary>
        </member>
        <member name="P:Apq.Net.HttpClientor.CacheDisabled">
            <summary>
            是否禁用缓存
            </summary>
        </member>
        <member name="T:Apq.Net.JsonParams.CloseParam">
            <summary>
            明确关闭连接
            </summary>
        </member>
        <member name="P:Apq.Net.JsonParams.CloseParam.Cmd">
            <summary>
            命令
            </summary>
        </member>
        <member name="P:Apq.Net.JsonParams.ParamBase.Cmd">
            <summary>
            命令
            </summary>
        </member>
        <member name="T:Apq.Net.Local">
            <summary>
            本机功能
            </summary>
        </member>
        <member name="M:Apq.Net.Local.GetIdelPort(System.Int32,System.Int32,System.Int32)">
            <summary>
            获取范围内[Min, Max]的一个空闲的端口(随机)
            </summary>
            <param name="PortType">类型{1:TCP, 2:UDP, ...}</param>
            <param name="Min">最小值(含)</param>
            <param name="Max">最大值(含)</param>
        </member>
        <member name="T:Apq.Net.PersistentClient">
            <summary>
            代表一个连接到服务端的长连接(客户端)
            </summary>
            <param name="provider_NewClient">提供创建新连接的方法</param>
        </member>
        <member name="M:Apq.Net.PersistentClient.#ctor(System.Func{System.Object})">
            <summary>
            代表一个连接到服务端的长连接(客户端)
            </summary>
            <param name="provider_NewClient">提供创建新连接的方法</param>
        </member>
        <member name="P:Apq.Net.PersistentClient.Server">
            <summary>
            域名/IP/Url
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.Port">
            <summary>
            端口
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.SessionID">
            <summary>
            由服务端分配的会话ID(客户端标识)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.Client">
            <summary>
            客户端
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.CTS_Connect">
            <summary>
            任务的取消令牌:连接、接收、心跳、[发送]
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.CTS_PreConnect">
            <summary>
            任务的取消令牌:上一次连接
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.Provider_NewClient">
            <summary>
            提供:创建新连接实例的方法。连接时使用
            </summary>
            <returns>基础TcpClient实例(或WebSocket等)</returns>
        </member>
        <member name="M:Apq.Net.PersistentClient.Dispose(System.Boolean)">
            <param name="disposing">指定释放类型{true:托管对象,false:未托管对象}</param>
        </member>
        <member name="M:Apq.Net.PersistentClient.BindClientEvents">
            <summary>
            设置Client相关事件的处理
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.UnBindClientEvents">
            <summary>
            取消Client相关事件的处理
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.Connected">
            <summary>
            是否已连接
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.TryTimes">
            <summary>
            已尝试连接的次数
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.MaxTryTimes">
            <summary>
            手动连接时的最大重连的次数(&lt;0表示不限)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.LastConnectTime">
            <summary>
            最后发起连接的时间
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.Connect(System.Threading.CancellationToken)">
            <summary>
            连接到服务器(最多自动重连MaxTryTimes次)
            </summary>
            <returns>是否成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentClient.TryConnect(System.Int32,System.Threading.CancellationToken)">
            <summary>
            连接到服务器(最多重连指定次数)
            </summary>
            <returns>是否成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentClient.TryConnectOnce(System.Threading.CancellationToken)">
            <summary>
            尝试连接到服务器(一次)
            </summary>
            <returns>是否成功, 是否超时</returns>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_Connect(System.Threading.CancellationToken)">
            <summary>
            Client发起连接
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.WaitConnectedWithTimeout(System.Single,System.Threading.CancellationToken)">
            <summary>
            超时前是否连接成功
            </summary>
            <param name="timeout">超时时长(秒)</param>
            <param name="token"></param>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterConnectTimeoutOnce">
            <summary>
            连接超时事件(一次连接)
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterConnectTimeout">
            <summary>
            连接超时事件
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterConnectError">
            <summary>
            连接过程中发生异常时
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterConnected">
            <summary>
            连接成功事件
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.OnAfterConnected">
            <summary>
            连接成功后的处理
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.CloseClient">
            <summary>
            调用Client的关闭方法
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.CloseReason">
            <summary>
            关闭原因
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.IsCloseBySelf">
            <summary>
            是否主动关闭
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.BeforeClose">
            <summary>
            连接关闭前
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterClose">
            <summary>
            连接关闭后
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.CloseAsync(System.String,System.Boolean)">
            <summary>
            异步关闭长连接
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_Close(System.String)">
            <summary>
            任务实现:关闭长连接
            </summary>
            <returns>是否关闭成功</returns>
        </member>
        <member name="P:Apq.Net.PersistentClient.UseSendQueue">
            <summary>
            是否使用发送队列。不使用时，发到队列的数据也是立即发送
            </summary>
        </member>
        <member name="F:Apq.Net.PersistentClient.SendQueue">
            <summary>
            待发送的数据队列
            </summary>
        </member>
        <member name="F:Apq.Net.PersistentClient.SendMsgQueue">
            <summary>
            待发送的消息队列
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.SuspendSendQueue">
            <summary>
            是否暂停发送队列
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.StartSend(System.Threading.CancellationToken)">
            <summary>
            启动发送任务
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_SendQueue(System.Threading.CancellationToken)">
            <summary>
            任务实现:发送
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_SendMsgQueue(System.Threading.CancellationToken)">
            <summary>
            任务实现:发送消息
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.Enqueue(System.Collections.Generic.IList{System.Byte})">
            <summary>
            发送数据入队
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.Enqueue(System.String)">
            <summary>
            发送消息入队
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.Send(System.Collections.Generic.IList{System.Byte},System.Threading.CancellationToken)">
            <summary>
            发送数据到服务端
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_Send(System.Collections.Generic.IList{System.Byte},System.Threading.CancellationToken)">
            <summary>
            发送数据到服务端(实现)
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentClient.Send(System.String,System.Threading.CancellationToken)">
            <summary>
            发送消息到服务端
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_Send(System.String,System.Threading.CancellationToken)">
            <summary>
            发送消息到服务端(实现)
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="E:Apq.Net.PersistentClient.BeforeSend">
            <summary>
            发送前
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterSend">
            <summary>
            发送后
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.BeforeSendMsg">
            <summary>
            发送前(文本)
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterSendMsg">
            <summary>
            发送后(文本)
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.StartReceive(System.Threading.CancellationToken)">
            <summary>
            启动接收任务
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_Receive(System.Threading.CancellationToken)">
            <summary>
            任务实现:接收
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterReceiveMsg">
            <summary>
            接收到服务端发送的消息后
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterReceiveData">
            <summary>
            接收到服务端发送的数据后
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.LastActiveTime">
            <summary>
            最后心跳时间
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.ShouldClose">
            <summary>
            连接是否应该关闭(已空闲过久)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.Provider_HeartBeatMsg">
            <summary>
            提供心跳消息(返回不为空就发)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.Provider_HeartBeatData">
            <summary>
            提供心跳数据(返回不为空就发)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.ReconnectWhenInterrupted">
            <summary>
            是否开启断线重连
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.MaxTryTimesWhenInterrupted">
            <summary>
            断线重连时的最大重连次数(&lt;0:无限重连, 0:不重连, &gt;0:最大重连次数)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentClient.CTS_ReconnectWhenInterrupted">
            <summary>
            任务的取消令牌:断线重连
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.StartHeartBeat(System.Threading.CancellationToken)">
            <summary>
            启动心跳任务
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoTask_HeartBeat(System.Double,System.Threading.CancellationToken)">
            <summary>
            任务实现:心跳检测
            </summary>
            <param name="interval">间隔(秒)</param>
        </member>
        <member name="E:Apq.Net.PersistentClient.AfterHeartBeatTimeout">
            <summary>
            心跳超时后
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.OnAfterHeartBeatTimeout">
            <summary>
            心跳超时后的处理
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentClient.DoReconnectWhenInterrupted">
            <summary>
            异步开始断线重连(0.2秒后开始)
            </summary>
        </member>
        <member name="T:Apq.Net.PersistentServer">
            <summary>
            代表一个已连接到客户端的长连接(服务端)
            </summary>
            <param name="client">IWebSocketConnection或Socket</param>
        </member>
        <member name="M:Apq.Net.PersistentServer.#ctor(System.Object)">
            <summary>
            代表一个已连接到客户端的长连接(服务端)
            </summary>
            <param name="client">IWebSocketConnection或Socket</param>
        </member>
        <member name="P:Apq.Net.PersistentServer.SessionID">
            <summary>
            自动分配客户端标识(会话ID)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentServer.Client">
            <summary>
            已接受的客户端(已连接)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentServer.CTS_Work">
            <summary>
            任务的取消令牌:与连接关联的所有任务
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.Dispose(System.Boolean)">
            <param name="disposing">指定释放类型{true:托管对象,false:未托管对象}</param>
        </member>
        <member name="M:Apq.Net.PersistentServer.BindClientEvents">
            <summary>
            设置Client相关事件的处理
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.UnBindClientEvents">
            <summary>
            取消Client相关事件的处理
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentServer.Connected">
            <summary>
            是否已连接
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.CloseClient">
            <summary>
            调用Client的关闭方法
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentServer.CloseReason">
            <summary>
            关闭原因
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentServer.IsCloseBySelf">
            <summary>
            是否主动关闭
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentServer.BeforeClose">
            <summary>
            连接关闭前
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentServer.AfterClose">
            <summary>
            连接关闭后
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.CloseAsync(System.String,System.Boolean)">
            <summary>
            异步关闭长连接
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.DoTask_Close(System.String)">
            <summary>
            任务实现:关闭长连接
            </summary>
            <returns>是否关闭成功</returns>
            <remarks>基类实现了停止连接任务</remarks>
        </member>
        <member name="M:Apq.Net.PersistentServer.Send(System.Collections.Generic.IList{System.Byte},System.Threading.CancellationToken)">
            <summary>
            发送数据到客户端
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentServer.DoTask_Send(System.Collections.Generic.IList{System.Byte},System.Threading.CancellationToken)">
            <summary>
            发送数据到客户端(实现)
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentServer.Send(System.String,System.Threading.CancellationToken)">
            <summary>
            发送消息到客户端
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.PersistentServer.DoTask_Send(System.String,System.Threading.CancellationToken)">
            <summary>
            发送消息到客户端(实现)
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="E:Apq.Net.PersistentServer.BeforeSend">
            <summary>
            发送前
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentServer.AfterSend">
            <summary>
            发送后
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentServer.BeforeSendMsg">
            <summary>
            发送前(文本)
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentServer.AfterSendMsg">
            <summary>
            发送后(文本)
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.StartReceive(System.Threading.CancellationToken)">
            <summary>
            启动接收任务
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.DoTask_Receive(System.Threading.CancellationToken)">
            <summary>
            任务实现:接收
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentServer.AfterReceiveMsg">
            <summary>
            接收到客户端发送的消息后
            </summary>
        </member>
        <member name="E:Apq.Net.PersistentServer.AfterReceiveData">
            <summary>
            接收到客户端发送的数据后
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentServer.LastActiveTime">
            <summary>
            最后心跳时间(由客户端发起)
            </summary>
        </member>
        <member name="P:Apq.Net.PersistentServer.ShouldClose">
            <summary>
            连接是否应该关闭(已空闲过久)
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.StartHeartBeat(System.Threading.CancellationToken)">
            <summary>
            启动心跳任务
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.DoTask_HeartBeat(System.Int32,System.Threading.CancellationToken)">
            <summary>
            任务实现:心跳检测
            </summary>
            <param name="interval">间隔(毫秒)</param>
        </member>
        <member name="E:Apq.Net.PersistentServer.AfterHeartBeatTimeout">
            <summary>
            心跳超时后
            </summary>
        </member>
        <member name="M:Apq.Net.PersistentServer.OnAfterHeartBeatTimeout">
            <summary>
            心跳超时后的处理
            </summary>
        </member>
        <member name="T:Apq.Net.PortEndPoint">
            <summary>
            端口端点
            </summary>
        </member>
        <member name="P:Apq.Net.PortEndPoint.EndPoint">
            <summary>
            端口
            </summary>
        </member>
        <member name="P:Apq.Net.PortEndPoint.IsListen">
            <summary>
            是否为监听的端口
            </summary>
        </member>
        <member name="M:Apq.Net.PortEndPoint.Equals(Apq.Net.PortEndPoint)">
            <summary>
            相等比较
            </summary>
            <remarks>IP地址和端口都相等则为相等。注意：0地址与任意地址都相等，0端口与任意端口都相等</remarks>
        </member>
        <member name="M:Apq.Net.PortEndPoint.GetHashCode">
            <summary>
            获取哈希值
            </summary>
            <returns></returns>
        </member>
        <member name="M:Apq.Net.PortEndPoint.Equals(System.Object)">
            <summary>
            相等比较
            </summary>
        </member>
        <member name="M:Apq.Net.PortEndPoint.op_Equality(Apq.Net.PortEndPoint,Apq.Net.PortEndPoint)">
            <summary>
            ==运算符
            </summary>
        </member>
        <member name="M:Apq.Net.PortEndPoint.op_Inequality(Apq.Net.PortEndPoint,Apq.Net.PortEndPoint)">
            <summary>
            !=运算符
            </summary>
        </member>
        <member name="T:Apq.Net.PostContent">
            <summary>
            默认的 FormUrlEncodedContent 碰到超长的文本会出现 uri too long 的异常，这里自己封装一个
            或使用 StringContent，同时设置ContentType="application/x-www-form-urlencoded" 即可
            参考来自 stackoverflow
            </summary>
        </member>
        <member name="T:Apq.Net.TcClient">
            <summary>
            代表一个连接到服务端的长连接(客户端)
            </summary>
            <param name="provider_NewClient">提供创建新连接的方法</param>
        </member>
        <member name="M:Apq.Net.TcClient.#ctor(System.Func{System.Object})">
            <summary>
            代表一个连接到服务端的长连接(客户端)
            </summary>
            <param name="provider_NewClient">提供创建新连接的方法</param>
        </member>
        <member name="P:Apq.Net.TcClient.TcpClient">
            <summary>
            TcpClient
            </summary>
            <remarks>创建后才不为null</remarks>
        </member>
        <member name="M:Apq.Net.TcClient.BindClientEvents">
            <summary>
            设置Client相关事件的处理
            </summary>
        </member>
        <member name="M:Apq.Net.TcClient.UnBindClientEvents">
            <summary>
            取消Client相关事件的处理
            </summary>
        </member>
        <member name="P:Apq.Net.TcClient.Connected">
            <summary>
            是否已连接
            </summary>
        </member>
        <member name="M:Apq.Net.TcClient.DoTask_Connect(System.Threading.CancellationToken)">
            <summary>
            Client发起连接
            </summary>
        </member>
        <member name="M:Apq.Net.TcClient.CloseClient">
            <summary>
            调用Client的关闭方法
            </summary>
        </member>
        <member name="M:Apq.Net.TcClient.DoTask_Send(System.Collections.Generic.IList{System.Byte},System.Threading.CancellationToken)">
            <summary>
            发送数据到服务端(实现)
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.TcClient.DoTask_Send(System.String,System.Threading.CancellationToken)">
            <summary>
            发送消息到服务端
            </summary>
            <returns>是否发送成功</returns>
        </member>
        <member name="M:Apq.Net.TcClient.DoTask_Receive(System.Threading.CancellationToken)">
            <summary>
            任务实现:接收
            </summary>
        </member>
        <member name="M:Apq.Net.UrlHelper.GetUrlWithoutParams(System.String,System.Collections.Generic.ICollection{System.String},System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String})">
            <summary>
            获取不含参数的url
            </summary>
            <param name="url"></param>
            <param name="separators"></param>
            <param name="encoding"></param>
            <param name="encodeQuery">提供编码或解码算法。默认无</param>
        </member>
        <member name="M:Apq.Net.UrlHelper.UrlAddParams(System.String,System.Collections.Generic.ICollection{System.Collections.Generic.KeyValuePair{System.String,System.String}},System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String})">
            <summary>
            在url的QueryString里添加参数
            </summary>
            <param name="url"></param>
            <param name="ps"></param>
            <param name="encoding"></param>
            <param name="encodeQuery">提供编码或解码算法。默认无</param>
        </member>
        <member name="M:Apq.Net.UrlHelper.PickQueryString(System.String,System.String)">
            <summary>
            提取QueryString
            </summary>
            <param name="separator">分隔符(这个字符之后的子串算为QueryString)</param>
        </member>
        <member name="M:Apq.Net.UrlHelper.PickParams(System.String,System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String},System.Collections.Generic.ICollection{System.String},System.String)">
            <summary>
            从QueryString中提取参数
            </summary>
            <param name="queryString"></param>
            <param name="encoding"></param>
            <param name="encodeQuery">提供编码或解码算法。默认使用 WebUtility.UrlDecode</param>
            <param name="separator"></param>
            <param name="assignment"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Net.UrlHelper.PickParamValue``1(System.String,System.String,System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String},System.Collections.Generic.ICollection{System.String},System.String)">
            <summary>
            从QueryString中提取参数值
            </summary>
            <typeparam name="T">值的类型</typeparam>
            <param name="queryString"></param>
            <param name="key">参数名称(如果同名参数有多个,只取第一个)</param>
            <param name="encoding"></param>
            <param name="encodeFunc">提供编码或解码算法。默认无</param>
            <param name="separator"></param>
            <param name="assignment"></param>
            <returns>参数值,是否获取成功</returns>
        </member>
        <member name="M:Apq.Net.UrlHelper.BuildQueryString(System.Collections.Generic.ICollection{System.Collections.Generic.KeyValuePair{System.String,System.String}},System.Text.Encoding,System.Func{System.String,System.Text.Encoding,System.String})">
            <summary>
            构建QueryString(k=v&amp;k=v...)
            </summary>
            <param name="ps"></param>
            <param name="encoding"></param>
            <param name="encodeQuery">提供编码或解码算法。默认无</param>
            <returns></returns>
        </member>
        <member name="T:Apq.NotifyChange.ListItemChanged`1">
            <summary>
            表示列表中更改的一项(一行)
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.ListItemChanged`1.Index">
            <summary>
            在列表中的索引位置
            </summary>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeConcurrentQueue`1.ListChanging">
            <summary>
            列表即将更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeConcurrentQueue`1.OnListChanging(Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs{`0})">
            <summary>
            通知列表即将更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeConcurrentQueue`1.FireListChanging(Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs{`0})">
            <summary>
            仅触发事件
            </summary>
            <returns>是否阻止更改</returns>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeConcurrentQueue`1.ListChanged">
            <summary>
            列表已更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeConcurrentQueue`1.OnListChanged(Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs{`0})">
            <summary>
            通知列表已更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeConcurrentQueue`1.FireListChanged(Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs{`0})">
            <summary>
            仅触发事件
            </summary>
        </member>
        <member name="T:Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs`1">
            <summary>
            列表事件的参数
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs`1.#ctor(Apq.NotifyChange.NotifyChangeConcurrentQueue{`0})">
            <summary>
            列表事件的参数
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs`1.ConcurrentQueue">
            <summary>
            列表实例
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs`1.ChangeType">
            <summary>
            更改类型
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs`1.Cancel">
            <summary>
            指示是否取消(中断后续流程)
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs`1.Deleted">
            <summary>
            删除的项
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeConcurrentQueueEventArgs`1.Inserted">
            <summary>
            插入的项
            </summary>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeList`1.ListChanging">
            <summary>
            列表即将更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeList`1.OnListChanging(Apq.NotifyChange.NotifyChangeListEventArgs{`0})">
            <summary>
            通知列表即将更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeList`1.FireListChanging(Apq.NotifyChange.NotifyChangeListEventArgs{`0})">
            <summary>
            仅触发事件
            </summary>
            <returns>是否阻止更改</returns>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeList`1.ListChanged">
            <summary>
            列表已更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeList`1.OnListChanged(Apq.NotifyChange.NotifyChangeListEventArgs{`0})">
            <summary>
            通知列表已更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeList`1.FireListChanged(Apq.NotifyChange.NotifyChangeListEventArgs{`0})">
            <summary>
            仅触发事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeList`1.RemoveAll(System.Predicate{`0})">
            <summary>
            移除满足条件的所有项
            </summary>
        </member>
        <member name="T:Apq.NotifyChange.NotifyChangeListEventArgs`1">
            <summary>
            列表事件的参数
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeListEventArgs`1.#ctor(Apq.NotifyChange.NotifyChangeList{`0})">
            <summary>
            列表事件的参数
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeListEventArgs`1.List">
            <summary>
            列表实例
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeListEventArgs`1.ChangeType">
            <summary>
            更改类型
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeListEventArgs`1.Cancel">
            <summary>
            指示是否取消(中断后续流程)
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeListEventArgs`1.Deleted">
            <summary>
            删除的项
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeListEventArgs`1.Inserted">
            <summary>
            插入的项
            </summary>
        </member>
        <member name="T:Apq.NotifyChange.NotifyChangeProperty">
            <summary>
            可暂停的更改通知
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeProperty.#ctor(System.String,Apq.NotifyChange.NotifyPropertyChange)">
            <summary>
            可暂停的更改通知
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeProperty.Instance">
            <summary>
            属性所属实例
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeProperty.PropertyName">
            <summary>
            属性名称
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeProperty.ChangingSuspend">
            <summary>
            是否已暂停更改前事件
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeProperty.ChangedSuspend">
            <summary>
            是否已暂停更改后事件
            </summary>
        </member>
        <member name="T:Apq.NotifyChange.NotifyChangeProperty`1">
            <summary>
            支持更改通知的属性(可暂停)
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeProperty`1.#ctor(System.String,Apq.NotifyChange.NotifyPropertyChange)">
            <summary>
            支持更改通知的属性(可暂停)
            </summary>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeProperty`1.Changing">
            <summary>
            更改前
            </summary>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeProperty`1.Changed">
            <summary>
            更改后
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeProperty`1.Value">
            <summary>
            当前值
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeProperty`1.HasValue">
            <summary>
            属性是否有值
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeProperty`1.OnChanging(`0,`0)">
            <summary>
            更改前(派生类重写时可以直接调用Fire方法而不调用此方法)
            </summary>
            <returns>是否阻止更改</returns>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeProperty`1.OnChanged(`0,`0)">
            <summary>
            更改后(派生类重写时可以直接调用Fire方法而不调用此方法)
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeProperty`1.FireChanging(`0,`0)">
            <summary>
            仅触发事件(暂停则不触发)
            </summary>
            <returns>是否阻止更改</returns>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeProperty`1.FireChanged(`0,`0)">
            <summary>
            仅触发事件(暂停则不触发)
            </summary>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeQueue`1.ListChanging">
            <summary>
            列表即将更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeQueue`1.OnListChanging(Apq.NotifyChange.NotifyChangeQueueEventArgs{`0})">
            <summary>
            通知列表即将更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeQueue`1.FireListChanging(Apq.NotifyChange.NotifyChangeQueueEventArgs{`0})">
            <summary>
            仅触发事件
            </summary>
            <returns>是否阻止更改</returns>
        </member>
        <member name="E:Apq.NotifyChange.NotifyChangeQueue`1.ListChanged">
            <summary>
            列表已更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeQueue`1.OnListChanged(Apq.NotifyChange.NotifyChangeQueueEventArgs{`0})">
            <summary>
            通知列表已更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeQueue`1.FireListChanged(Apq.NotifyChange.NotifyChangeQueueEventArgs{`0})">
            <summary>
            仅触发事件
            </summary>
        </member>
        <member name="T:Apq.NotifyChange.NotifyChangeQueueEventArgs`1">
            <summary>
            列表事件的参数
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyChangeQueueEventArgs`1.#ctor(Apq.NotifyChange.NotifyChangeQueue{`0})">
            <summary>
            列表事件的参数
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeQueueEventArgs`1.Queue">
            <summary>
            列表实例
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeQueueEventArgs`1.ChangeType">
            <summary>
            更改类型
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeQueueEventArgs`1.Cancel">
            <summary>
            指示是否取消(中断后续流程)
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeQueueEventArgs`1.Deleted">
            <summary>
            删除的项
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.NotifyChangeQueueEventArgs`1.Inserted">
            <summary>
            插入的项
            </summary>
        </member>
        <member name="T:Apq.NotifyChange.NotifyPropertyChange">
            <summary>
            属性更改通知(可暂停)
            </summary>
            <remarks></remarks>
        </member>
        <member name="F:Apq.NotifyChange.NotifyPropertyChange.EventSuspendAnyProperty">
            <summary>
            表示用于阻止任意属性的更改事件的可用名称["All", "Any"]
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.EventSuspendList_Contains(System.Collections.Generic.List{System.String},System.String)">
            <summary>
            暂停列表中是否包含指定名称
            </summary>
            <returns>如果列表中包含了“任意属性”，则一定包含(即返回true)</returns>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.StartEventListener_PropertyChange">
            <summary>
            开始监听自己的属性更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.StopEventListener_PropertyChange">
            <summary>
            停止监听自己的属性更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.Dispose(System.Boolean)">
            <param name="disposing">指定释放类型{true:托管对象,false:未托管对象}</param>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.EventSuspend_PropertyChanging(System.String,System.Boolean)">
            <summary>
            暂停或恢复 引发属性即将更改事件
            </summary>
            <param name="propertyName">属性名("All"/"Any"表示任意属性)</param>
            <param name="Resume">是否恢复引发事件</param>
        </member>
        <member name="E:Apq.NotifyChange.NotifyPropertyChange.PropertyChanging">
            <summary>
            属性即将更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.OnPropertyChanging(System.String,System.Object,System.Object)">
            <summary>
            通知属性即将更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.FirePropertyChanging(System.String,System.Object,System.Object)">
            <summary>
            仅触发事件(暂停则不触发)
            </summary>
            <returns>是否阻止更改</returns>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.EventSuspend_PropertyChanged(System.String,System.Boolean)">
            <summary>
            暂停或恢复 引发属性已更改事件
            </summary>
            <param name="propertyName">属性名("All"/"Any"表示任意属性)</param>
            <param name="Resume">是否恢复引发事件</param>
        </member>
        <member name="E:Apq.NotifyChange.NotifyPropertyChange.PropertyChanged">
            <summary>
            属性已更改事件
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.OnPropertyChanged(System.String,System.Object,System.Object)">
            <summary>
            通知属性已更改
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.NotifyPropertyChange.FirePropertyChanged(System.String,System.Object,System.Object)">
            <summary>
            仅触发事件(暂停则不触发)
            </summary>
        </member>
        <member name="T:Apq.NotifyChange.PropertyChangeEventArgs">
            <summary>
            属性更改事件参数
            </summary>
        </member>
        <member name="M:Apq.NotifyChange.PropertyChangeEventArgs.#ctor(System.String)">
            <summary>
            属性更改事件参数
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.PropertyChangeEventArgs.PropertyName">
            <summary>
            属性名
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.PropertyChangeEventArgs.Cancel">
            <summary>
            指示是否取消(中断后续流程)
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.PropertyChangeEventArgs.OriginalValue">
            <summary>
            原值
            </summary>
        </member>
        <member name="P:Apq.NotifyChange.PropertyChangeEventArgs.NewValue">
            <summary>
            新值
            </summary>
        </member>
        <member name="T:Apq.PlAccessor.PHP.QueryStringBuilder">
            <summary>
             Helps up build a query string by converting an object into a set of named-values and making a query string out of it.
            </summary>
        </member>
        <member name="M:Apq.PlAccessor.PHP.QueryStringBuilder.BuildQueryString(System.Object,System.String)">
            <summary>
            相当于PHP中的 http_build_query
            </summary>
        </member>
        <member name="M:Apq.PlAccessor.PHP.QueryStringBuilder.GetUriString(System.String)">
            <summary>
             Convert the key-value pairs that we've collected into an actual query string.
            </summary>
        </member>
        <member name="M:Apq.PlAccessor.PHP.QueryStringBuilder.AddEntry(System.String,System.Object,System.Boolean)">
            <summary> Adds a single entry to the collection. </summary>
            <param name="prefix"> The prefix to use when generating the key of the entry. Can be null. </param>
            <param name="instance"> The instance to add.
             
             - If the instance is a dictionary, the entries determine the key and values.
             - If the instance is a collection, the keys will be the index of the entries, and the value
             will be each item in the collection.
             - If allowObjects is true, then the object's properties' names will be the keys, and the
             values of the properties will be the values.
             - Otherwise the instance is added with the given prefix to the collection of items. </param>
            <param name="allowObjects"> true to add the properties of the given instance (if the object is
             not a collection or dictionary), false to add the object as a key-value pair. </param>
        </member>
        <member name="M:Apq.PlAccessor.PHP.QueryStringBuilder.Add(System.String,System.Collections.Generic.IEnumerable{Apq.PlAccessor.PHP.QueryStringBuilder.Entry})">
            <summary> Adds the given collection of entries. </summary>
        </member>
        <member name="M:Apq.PlAccessor.PHP.QueryStringBuilder.GetObjectAdapter(System.Object)">
            <summary>
             Returns a collection of entries that represent the properties on the object.
            </summary>
        </member>
        <member name="M:Apq.PlAccessor.PHP.QueryStringBuilder.GetArrayAdapter(System.Collections.ICollection)">
            <summary>
             Returns a collection of entries that represent items in the collection.
            </summary>
        </member>
        <member name="M:Apq.PlAccessor.PHP.QueryStringBuilder.GetDictionaryAdapter(System.Collections.IDictionary)">
            <summary>
             Returns a collection of entries that represent items in the dictionary.
            </summary>
        </member>
        <member name="T:Apq.RandomString">
            <summary>
            随机字符串生成器
            </summary>
        </member>
        <member name="P:Apq.RandomString.SimpleChars">
            <summary>
            易于辨识的字母数字范围(10个数字+小写优先)
            </summary>
        </member>
        <member name="P:Apq.RandomString.SimpleChars2">
            <summary>
            易于辨识的字母数字范围(10个数字+大写优先)
            </summary>
        </member>
        <member name="M:Apq.RandomString.Random(System.Int32,System.Boolean,System.Char[])">
            <summary>
            生成随机字符串
            </summary>
            <param name="Length">指定长度</param>
            <param name="Repeat">是否允许重复</param>
            <param name="All">字符集</param>
            <returns></returns>
        </member>
        <member name="M:Apq.RandomString.Random(System.Int32,System.Boolean,System.String)">
            <summary>
            生成随机字符串
            </summary>
            <param name="Length">指定长度</param>
            <param name="Repeat">是否允许重复</param>
            <param name="All">字符集</param>
            <returns></returns>
        </member>
        <member name="M:Apq.RandomString.Random(System.UInt32,System.Int32,System.Boolean,System.Char[])">
            <summary>
            返回指定数量,指定长度的随机字符串
            </summary>
            <param name="Count">指定的数量</param>
            <param name="Length">指定的长度</param>
            <param name="Repeat">是否允许重复</param>
            <param name="All">字符集</param>
            <returns></returns>
        </member>
        <member name="M:Apq.RandomString.Random(System.UInt32,System.Int32,System.Boolean,System.String)">
            <summary>
            返回指定数量,指定长度的随机字符串
            </summary>
            <param name="Count">指定的数量</param>
            <param name="Length">指定的长度</param>
            <param name="Repeat">是否允许重复</param>
            <param name="All">字符集</param>
            <returns></returns>
        </member>
        <member name="T:Apq.Reflection.TypeCache">
            <summary>
            类型缓存,避免重复读取类型
            </summary>
        </member>
        <member name="M:Apq.Reflection.TypeCache.Init">
            <summary>
            对新创建的实例进行初始化
            </summary>
        </member>
        <member name="M:Apq.Reflection.TypeCache.GetAssembly(System.String)">
            <summary>
            获取程序集,缓存中不存在时,按路径加载到缓存
            </summary>
            <param name="dllPath">程序集路径</param>
        </member>
        <member name="M:Apq.Reflection.TypeCache.GetType(System.String,System.String)">
            <summary>
            获取类型,缓存中不存在时,自动寻找类型并加入缓存
            </summary>
            <param name="fullClassName">类全名</param>
            <param name="dllPath">指定在哪个程序集中寻找</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Reflection.TypeCache.AddType(System.String,System.Type,System.Boolean)">
            <summary>
            将类型添加到缓存
            </summary>
            <param name="fullClassName">类全名</param>
            <param name="type"></param>
            <param name="replace">重复添加时是否替换</param>
            <remarks>程序集加入缓存使用GetAssembly方法</remarks>
        </member>
        <member name="T:Apq.Security.Cryptography.AesHelper">
            <summary>
            AesHelper(对称加密)
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.AesHelper.FormatKey(System.Byte[])">
            <summary>
            格式化密钥
            </summary>
            <param name="aesKey">密钥</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Security.Cryptography.AesHelper.EncryptFile(System.String,System.String,System.Byte[],System.Byte[],System.Security.Cryptography.CipherMode,System.Security.Cryptography.PaddingMode)">
            <summary>
            加密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="Key">加密密钥</param>
            <param name="IV">初始向量</param>
            <param name="cipherMode">块密码模式</param>
            <param name="paddingMode">填充模式</param>
        </member>
        <member name="M:Apq.Security.Cryptography.AesHelper.DecryptFile(System.String,System.String,System.Byte[],System.Byte[],System.Security.Cryptography.CipherMode,System.Security.Cryptography.PaddingMode)">
            <summary>
            解密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="Key">解密密钥</param>
            <param name="IV">初始向量</param>
            <param name="cipherMode">块密码模式</param>
            <param name="paddingMode">填充模式</param>
        </member>
        <member name="M:Apq.Security.Cryptography.AesHelper.EncryptString(System.String,System.Byte[],System.Byte[],System.Security.Cryptography.CipherMode,System.Security.Cryptography.PaddingMode)">
            <summary>
            加密字符串
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="Key">加密密钥</param>
            <param name="IV">初始向量</param>
            <param name="cipherMode">块密码模式</param>
            <param name="paddingMode">填充模式</param>
            <returns>Base64编码后的字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.AesHelper.DecryptString(System.String,System.Byte[],System.Byte[],System.Security.Cryptography.CipherMode,System.Security.Cryptography.PaddingMode)">
            <summary>
            解密字符串
            </summary>
            <param name="CypherText">加密后的Base64字符串</param>
            <param name="Key">解密密钥</param>
            <param name="IV">初始向量</param>
            <param name="cipherMode">块密码模式</param>
            <param name="paddingMode">填充模式</param>
        </member>
        <member name="M:Apq.Security.Cryptography.AesHelper.EncryptString(System.String,System.String,System.String,System.Text.Encoding,System.Text.Encoding,System.Security.Cryptography.CipherMode,System.Security.Cryptography.PaddingMode)">
            <summary>
            加密字符串
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="Key">加密密钥</param>
            <param name="IV">初始向量</param>
            <param name="textEncoding">原始串编码</param>
            <param name="ivEncoding">初始向量编码</param>
            <param name="cipherMode">块密码模式</param>
            <param name="paddingMode">填充模式</param>
            <returns>Base64编码后的字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.AesHelper.DecryptString(System.String,System.String,System.String,System.Text.Encoding,System.Text.Encoding,System.Security.Cryptography.CipherMode,System.Security.Cryptography.PaddingMode)">
            <summary>
            解密字符串
            </summary>
            <param name="CypherText">加密后的Base64字符串</param>
            <param name="Key">解密密钥</param>
            <param name="IV">初始向量</param>
            <param name="keyEncoding">解密密钥编码</param>
            <param name="ivEncoding">初始向量编码</param>
            <param name="cipherMode">块密码模式</param>
            <param name="paddingMode">填充模式</param>
        </member>
        <member name="T:Apq.Security.Cryptography.BCRSA.RSAKEY">
            <summary>
            KEY 结构体
            </summary>
        </member>
        <member name="P:Apq.Security.Cryptography.BCRSA.RSAKEY.PublicKey">
            <summary>
            公钥
            </summary>
        </member>
        <member name="P:Apq.Security.Cryptography.BCRSA.RSAKEY.PrivateKey">
            <summary>
            私钥
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.BCRSA.EncryptByPrivateKey(System.String,System.String)">
            <summary>
            私钥加密
            </summary>
            <param name="data">加密内容</param>
            <param name="pemPrivateKey">私钥（Base64后的）</param>
            <returns>返回Base64内容</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.BCRSA.DecryptByPrivateKey(System.String,System.String)">
            <summary>
            私钥解密
            </summary>
            <param name="data">待解密的内容</param>
            <param name="pemPrivateKey">私钥（Base64编码后的）</param>
            <returns>返回明文</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.BCRSA.EncryptByPublicKey(System.String,System.String)">
            <summary>
            公钥加密
            </summary>
            <param name="data">加密内容</param>
            <param name="pemPublicKey">公钥（Base64编码后的）</param>
            <returns>返回Base64内容</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.BCRSA.DecryptByPublicKey(System.String,System.String)">
            <summary>
            公钥解密
            </summary>
            <param name="data">待解密的内容</param>
            <param name="pemPublicKey">公钥（Base64编码后的）</param>
            <returns>返回明文</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.BCRSA.SignByPrivateKey_SHA1WithRSA(System.String,System.String)">
            <summary>
            用私钥签名
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.BCRSA.VerifyByPublicKey_SHA1WithRSA(System.String,System.String,System.String)">
            <summary>
            用公钥验签
            </summary>
        </member>
        <member name="T:Apq.Security.Cryptography.DESHelper">
            <summary>
            DESHelper(对称加密,据说不太安全,应使用AES)
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.DESHelper.FormatKey(System.Byte[])">
            <summary>
            格式化密钥
            </summary>
            <param name="desKey">密钥</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Security.Cryptography.DESHelper.EncryptFile(System.String,System.String,System.Byte[],System.Byte[])">
            <summary>
            加密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="desKey">加密密钥</param>
            <param name="desIV">初始向量</param>
        </member>
        <member name="M:Apq.Security.Cryptography.DESHelper.DecryptFile(System.String,System.String,System.Byte[],System.Byte[])">
            <summary>
            解密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="desKey">解密密钥</param>
            <param name="desIV">初始向量</param>
        </member>
        <member name="M:Apq.Security.Cryptography.DESHelper.EncryptString(System.String,System.Byte[],System.Byte[])">
            <summary>
            加密字符串
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="desKey">加密密钥</param>
            <param name="desIV">初始向量</param>
            <returns>Base64编码后的字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.DESHelper.DecryptString(System.String,System.Byte[],System.Byte[])">
            <summary>
            解密字符串
            </summary>
            <param name="CypherText">加密后的Base64字符串</param>
            <param name="desKey">解密密钥</param>
            <param name="desIV">初始向量</param>
        </member>
        <member name="M:Apq.Security.Cryptography.DESHelper.EncryptString(System.String,System.String,System.String,System.Text.Encoding,System.Text.Encoding)">
            <summary>
            加密字符串
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="desKey">加密密钥</param>
            <param name="desIV">初始向量</param>
            <param name="keyEncoding">加密密钥编码</param>
            <param name="ivEncoding">初始向量编码</param>
            <returns>Base64编码后的字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.DESHelper.DecryptString(System.String,System.String,System.String,System.Text.Encoding,System.Text.Encoding)">
            <summary>
            解密字符串
            </summary>
            <param name="CypherText">加密后的Base64字符串</param>
            <param name="desKey">解密密钥</param>
            <param name="desIV">初始向量</param>
            <param name="keyEncoding">解密密钥编码</param>
            <param name="ivEncoding">初始向量编码</param>
        </member>
        <member name="T:Apq.Security.Cryptography.DSAHelper">
            <summary>
            DSA助手(数字签名)
            </summary>
        </member>
        <member name="P:Apq.Security.Cryptography.DSAHelper.FileReadStep">
            <summary>
            文件操作时单次读取的最大字节数
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.DSAHelper.CreateKey(System.Boolean)">
            <summary>
            创建密钥对(XmlString),使用者应将结果保存到文件存档
            </summary>
            <param name="ContainsPKey">是否包含私钥</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Security.Cryptography.DSAHelper.SignString(System.String,System.String,System.Text.Encoding)">
            <summary>
            DSA签名
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="xmlString">密钥(公钥私钥俱有)</param>
            <param name="textEncoding">原始串编码</param>
            <returns>Base64编码后的已签名字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.DSAHelper.VerifyString(System.String,System.String,System.String,System.Text.Encoding)">
            <summary>
            DSA验证
            </summary>
            <param name="CypherText">签名后的Base64字符串</param>
            <param name="xmlString">密钥(至少含公钥)</param>
            <param name="signString">签名串</param>
            <param name="signEncoding">签名串编码</param>
        </member>
        <member name="T:Apq.Security.Cryptography.HMACSHA1Helper">
            <summary>
            HMAC-SHA1 Helper
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.HMACSHA1Helper.EncryptString(System.String,System.String,System.Text.Encoding,System.Text.Encoding)">
            <summary>
            字符串签名
            </summary>
            <param name="text">原始字符串</param>
            <param name="key">密钥</param>
            <param name="textEncoding">原始串编码</param>
            <param name="keyEncoding">密钥编码</param>
            <returns>签名结果(16进制)</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.HMACSHA1Helper.EncryptString(System.String,System.Byte[],System.Text.Encoding)">
            <summary>
            字符串签名
            </summary>
            <param name="text">原始字符串</param>
            <param name="key">密钥</param>
            <param name="textEncoding">原始串编码</param>
            <returns>签名结果(16进制)</returns>
        </member>
        <member name="T:Apq.Security.Cryptography.MD5Helper">
            <summary>
            MD5Helper
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.MD5Helper.EncryptString(System.String,System.Text.Encoding)">
            <summary>
            加密字符串
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="textEncoding">原始串编码</param>
            <returns>MD5串(16进制)</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.MD5Helper.EncryptFile(System.String)">
            <summary>
            加密文件
            </summary>
            <param name="inName">文件地址</param>
            <returns>MD5串(16进制)</returns>
        </member>
        <member name="T:Apq.Security.Cryptography.RSAHelper">
            <summary>
            RSA助手(非对称算法)
            </summary>
        </member>
        <member name="P:Apq.Security.Cryptography.RSAHelper.FileReadStep">
            <summary>
            文件操作时单次读取的最大字节数
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.CreateKey(System.Boolean)">
            <summary>
            创建密钥对(XmlString),使用者应将结果保存到文件存档
            </summary>
            <param name="ContainsPKey">是否包含私钥</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.GetPubKey(System.String)">
            <summary>
            从私钥中提取公钥
            </summary>
            <param name="PriKey"></param>
            <returns></returns>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.EncryptFile(System.String,System.String,System.String,System.Security.Cryptography.RSAEncryptionPadding)">
            <summary>
            加密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="xmlString">密钥(至少含公钥)</param>
            <param name="rsaPadding">填充模式</param>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.DecryptFile(System.String,System.String,System.String,System.Security.Cryptography.RSAEncryptionPadding)">
            <summary>
            解密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="xmlString">密钥(公钥私钥俱有)</param>
            <param name="rsaPadding">填充模式</param>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.EncryptString(System.String,System.String,System.Text.Encoding,System.Security.Cryptography.RSAEncryptionPadding)">
            <summary>
            加密字符串
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="xmlString">公钥</param>
            <param name="textEncoding">原始串编码</param>
            <returns>Base64编码后的字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.DecryptString(System.String,System.String,System.Text.Encoding,System.Security.Cryptography.RSAEncryptionPadding)">
            <summary>
            解密字符串
            </summary>
            <param name="CypherText">加密后的Base64字符串</param>
            <param name="textEncoding">原始串编码</param>
            <param name="xmlString">私钥</param>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.SignString(System.String,System.String,System.Text.Encoding)">
            <summary>
            RSA签名(SHA1)
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="xmlString">私钥</param>
            <param name="textEncoding">原始串编码</param>
            <returns>Base64编码后的已签名字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.RSAHelper.VerifyString(System.String,System.String,System.String,System.Text.Encoding)">
            <summary>
            RSA验证(SHA1)
            </summary>
            <param name="CypherText">签名后的Base64字符串</param>
            <param name="xmlString">公钥</param>
            <param name="PlainText">原始串</param>
            <param name="textEncoding">原始串编码</param>
        </member>
        <member name="T:Apq.Security.Cryptography.SymmetricAlgorithmHelper">
            <summary>
            对称算法助手
            </summary>
        </member>
        <member name="P:Apq.Security.Cryptography.SymmetricAlgorithmHelper.FileReadStep">
            <summary>
            文件操作时单次读取的最大字节数
            </summary>
        </member>
        <member name="M:Apq.Security.Cryptography.SymmetricAlgorithmHelper.FormatKey(System.Byte[],System.Int32)">
            <summary>
            格式化密钥,跳过全0字节,不足时补入0xFF
            </summary>
            <param name="Key">密钥</param>
            <param name="keySize">返回'位'的长度(因为处理时的最小长度是字节，所以该值应是8的倍数)</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Security.Cryptography.SymmetricAlgorithmHelper.EncryptFile(System.String,System.String,System.Security.Cryptography.SymmetricAlgorithm)">
            <summary>
            加密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="Algorithm">对称算法</param>
        </member>
        <member name="M:Apq.Security.Cryptography.SymmetricAlgorithmHelper.DecryptFile(System.String,System.String,System.Security.Cryptography.SymmetricAlgorithm)">
            <summary>
            解密文件
            </summary>
            <param name="inName">来源文件</param>
            <param name="outName">输出文件</param>
            <param name="Algorithm">对称算法</param>
        </member>
        <member name="M:Apq.Security.Cryptography.SymmetricAlgorithmHelper.EncryptString(System.String,System.Security.Cryptography.SymmetricAlgorithm)">
            <summary>
            加密字符串
            </summary>
            <param name="PlainText">原始字符串</param>
            <param name="Algorithm">对称算法</param>
            <returns>Base64编码后的字符串</returns>
        </member>
        <member name="M:Apq.Security.Cryptography.SymmetricAlgorithmHelper.DecryptString(System.String,System.Security.Cryptography.SymmetricAlgorithm)">
            <summary>
            解密字符串
            </summary>
            <param name="CypherText">加密后的Base64字符串</param>
            <param name="Algorithm">对称算法</param>
            <returns>原始字符串</returns>
        </member>
        <member name="T:Apq.Tasking.CycleTask">
            <summary>
            给任务命名,并将任务和取消令牌关联起来。并提供循环任务模板给子类。
            </summary>
        </member>
        <member name="M:Apq.Tasking.CycleTask.CycleWork(System.Int32)">
            <summary>
            循环任务模板
            </summary>
            <param name="interval">循环操作的间隔时间。单位毫秒。</param>
        </member>
        <member name="M:Apq.Tasking.CycleTask.BeforeCycleWork">
            <summary>
            循环前的工作,一般是准备类工作
            </summary>
            <returns>返回false表示准备工作不成功,任务直接结束</returns>
        </member>
        <member name="E:Apq.Tasking.CycleTask.BeforeCycleWorkCompleted">
            <summary>
            通知循环前的工作完成
            </summary>
        </member>
        <member name="M:Apq.Tasking.CycleTask.CycleSubWork">
            <summary>
            单次循环的工作
            </summary>
        </member>
        <member name="M:Apq.Tasking.CycleTask.FinallyCycleWork">
            <summary>
            任务结束时的工作
            </summary>
        </member>
        <member name="P:Apq.Tasking.CycleTask.CTask">
            <summary>
            启动的任务
            </summary>
        </member>
        <member name="M:Apq.Tasking.CycleTask.Start(System.Threading.Tasks.TaskCreationOptions)">
            <summary>
            启动(未启动过或已运行结束的任务才能真正的再次启动)
            </summary>
        </member>
        <member name="M:Apq.Tasking.CycleTask.Stop">
            <summary>
            通知任务取消
            </summary>
        </member>
        <member name="M:Apq.Tasking.CycleTask.WhileDo(System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到达成停止条件
            </summary>
            <param name="stopTask">停止条件,返回值为true后停止操作</param>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="success">达成后的操作</param>
            <param name="fail">最终未达成时的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否达成</returns>
        </member>
        <member name="M:Apq.Tasking.CycleTask.WhileDo(System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到达成停止条件
            </summary>
            <param name="stopFunc">停止条件,返回值为true后停止操作</param>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="success">达成后的操作</param>
            <param name="fail">最终未达成时的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否达成</returns>
        </member>
        <member name="M:Apq.Tasking.CycleTask.WhileDo(System.Func{System.Boolean},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到达成停止条件
            </summary>
            <param name="stopFunc">停止条件,返回值为true后停止操作</param>
            <param name="doFunc">执行的操作,返回true表示执行了操作</param>
            <param name="success">达成后的操作</param>
            <param name="fail">最终未达成时的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否达成</returns>
        </member>
        <member name="M:Apq.Tasking.CycleTask.DoUntil(System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到成功或超时
            </summary>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="stopTask">返回值为true后停止操作</param>
            <param name="success">成功后的操作</param>
            <param name="fail">失败后的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否操作成功</returns>
        </member>
        <member name="M:Apq.Tasking.CycleTask.DoUntil(System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到成功或超时
            </summary>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="stopFunc">返回值为true后停止操作</param>
            <param name="success">成功后的操作</param>
            <param name="fail">失败后的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否操作成功</returns>
        </member>
        <member name="M:Apq.Tasking.CycleTask.DoUntil(System.Func{System.Boolean},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到成功或超时
            </summary>
            <param name="doFunc">执行的操作,返回true表示执行了操作</param>
            <param name="stopFunc">返回值为true后停止操作</param>
            <param name="success">成功后的操作</param>
            <param name="fail">失败后的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否操作成功</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.WaitUntil(System.Threading.CancellationToken,System.Func{System.Boolean},System.Int32,System.Int32)">
            <summary>
            等待到条件成立或超时
            </summary>
            <returns>退出时条件是否达成(没有达成的原因是超时)</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.WaitUntil(System.Threading.CancellationToken,System.Func{System.Boolean},System.Func{System.Boolean},System.Int32,System.Int32)">
            <summary>
            在满足前提时,等待到条件成立或超时
            </summary>
            <returns>退出时条件是否达成(没有达成的原因是超时或前提已不成立)</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeTask">循环前任务,返回true表示取消循环</param>
            <param name="cycleTask">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyTask">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Action,System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeTask">循环前任务,返回true表示取消循环</param>
            <param name="cycleTask">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyAction">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeTask">循环前任务,返回true表示取消循环</param>
            <param name="cycleFunc">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyTask">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Boolean},System.Action,System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeTask">循环前任务,返回true表示取消循环</param>
            <param name="cycleFunc">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyAction">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeFunc">循环前任务,返回true表示取消循环</param>
            <param name="cycleTask">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyTask">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Action,System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeFunc">循环前任务,返回true表示取消循环</param>
            <param name="cycleTask">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyAction">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Boolean},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeFunc">循环前任务,返回true表示取消循环</param>
            <param name="cycleFunc">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyTask">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoCycle(System.Threading.CancellationTokenSource,System.Func{System.Boolean},System.Func{System.Boolean},System.Action,System.Int32,System.Int32)">
            <summary>
            执行循环任务
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="beforeFunc">循环前任务,返回true表示取消循环</param>
            <param name="cycleFunc">循环任务体,返回true表示不再执行下一轮</param>
            <param name="finallyAction">结束时的任务(一定会执行)</param>
            <param name="Timeout">循环的超时时间(不包含循环前任务的耗时)。单位毫秒。0为不超时</param>
            <param name="Interval">循环的间隔时间。单位毫秒。</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.WhileDo(System.Threading.CancellationTokenSource,System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到达成停止条件
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="stopCondition">停止条件,返回值为true后停止操作</param>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="success">达成后的操作</param>
            <param name="fail">最终未达成时的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="Interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否达成</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.WhileDo(System.Threading.CancellationTokenSource,System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到达成停止条件
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="stopCondition">停止条件,返回值为true后停止操作</param>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="success">达成后的操作</param>
            <param name="fail">最终未达成时的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="Interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否达成</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.WhileDo(System.Threading.CancellationTokenSource,System.Func{System.Boolean},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到达成停止条件
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="stopCondition">停止条件,返回值为true后停止操作</param>
            <param name="doFunc">执行的操作,返回true表示执行了操作</param>
            <param name="success">达成后的操作</param>
            <param name="fail">最终未达成时的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。</param>
            <param name="Interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否达成</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoUntil(System.Threading.CancellationTokenSource,System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到成功或超时
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="stopCondition">返回值为true后停止操作</param>
            <param name="success">成功后的操作</param>
            <param name="fail">失败后的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。0为不超时</param>
            <param name="Interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否操作成功</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoUntil(System.Threading.CancellationTokenSource,System.Func{System.Threading.Tasks.Task{System.Boolean}},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到成功或超时
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="doTask">执行的操作,返回true表示执行了操作</param>
            <param name="stopCondition">返回值为true后停止操作</param>
            <param name="success">成功后的操作</param>
            <param name="fail">失败后的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。0为不超时</param>
            <param name="Interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否操作成功</returns>
        </member>
        <member name="M:Apq.Tasking.TaskHelper.DoUntil(System.Threading.CancellationTokenSource,System.Func{System.Boolean},System.Func{System.Boolean},System.Func{System.Threading.Tasks.Task},System.Action{System.Boolean},System.Boolean,System.Int32,System.Int32)">
            <summary>
            重复执行指定的操作,直到成功或超时
            </summary>
            <param name="TokenSource">取消通知</param>
            <param name="doFunc">执行的操作,返回true表示执行了操作</param>
            <param name="stopCondition">返回值为true后停止操作</param>
            <param name="success">成功后的操作</param>
            <param name="fail">失败后的操作。超时时参数值为true。</param>
            <param name="knit">操作失败时是否立即重做(即:true表示不等待循环间隔)</param>
            <param name="Timeout">超时时间。单位毫秒。0为不超时</param>
            <param name="Interval">循环操作的间隔时间。单位毫秒。</param>
            <returns>是否操作成功</returns>
        </member>
        <member name="T:Apq.Tasking.TaskResult">
            <summary>
            表示任务结果
            </summary>
        </member>
        <member name="P:Apq.Tasking.TaskResult.Task">
            <summary>
            哪个任务的结果
            </summary>
        </member>
        <member name="P:Apq.Tasking.TaskResult.Success">
            <summary>
            是否成功
            </summary>
        </member>
        <member name="P:Apq.Tasking.TaskResult.Message">
            <summary>
            错误信息或输出信息
            </summary>
        </member>
        <member name="P:Apq.Tasking.TaskResult.Exception">
            <summary>
            异常
            </summary>
        </member>
        <member name="P:Apq.Text.CsvTaskResult.FullFileNameWithoutExt_Pb">
            <summary>
            Pb文件完整路径(不含后缀)
            </summary>
        </member>
        <member name="P:Apq.Text.CsvTaskResult.PbExt">
            <summary>
            Pb文件后缀(可以为空或.开头)
            </summary>
        </member>
        <member name="P:Apq.Text.CsvTaskResult.HadReadCsv">
            <summary>
            有没有读取文件进行解析(只检查读取过的文件是否成功)
            </summary>
        </member>
        <member name="P:Apq.Text.CsvTaskResult.ErrorCol">
            <summary>
            第几列出错
            </summary>
        </member>
        <member name="P:Apq.Text.CsvTaskResult.ErrorColName">
            <summary>
            出错列名
            </summary>
        </member>
        <member name="T:Apq.Text.TxtFileHelper">
            <summary>
            文本文件助手
            </summary>
        </member>
        <member name="M:Apq.Text.TxtFileHelper.DetectEncoding(Apq.Text.TxtTaskResult,System.Single)">
            <summary>
            检测指定文本文件的编码格式
            </summary>
            <param name="result">要检测的文件及检测结果</param>
            <param name="confidence">信心至少要达到该值才认为检测出了正确的文件编码</param>
        </member>
        <member name="M:Apq.Text.TxtFileHelper.ReadAllText(Apq.Text.TxtTaskResult,System.Single)">
            <summary>
            自动检测文件编码,并读取文件
            </summary>
            <param name="confidence">检测文件编码的最低信心</param>
            <returns></returns>
        </member>
        <member name="M:Apq.Text.TxtFileHelper.ConvertEncoding(Apq.Text.TxtTaskResult,System.Text.Encoding,System.Threading.CancellationToken,System.Single)">
            <summary>
            对指定的文本文件进行编码转换
            </summary>
            <param name="result">要转换的文件及转换结果</param>
            <param name="encoding">转换为该编码</param>
            <param name="token">取消令牌</param>
            <param name="confidence">信心至少要达到该值才认为检测出了正确的文件编码,并进行转换</param>
        </member>
        <member name="T:Apq.Text.TxtTaskResult">
            <summary>
            表示对文本文件进行处理的结果
            </summary>
        </member>
        <member name="P:Apq.Text.TxtTaskResult.FullFileNameWithoutExt">
            <summary>
            文本文件完整路径(不含后缀)
            </summary>
        </member>
        <member name="P:Apq.Text.TxtTaskResult.FileNameWithoutExt">
            <summary>
            不含目录和后缀的文件名
            </summary>
        </member>
        <member name="P:Apq.Text.TxtTaskResult.FileExt">
            <summary>
            文件后缀(可以为空或.开头)
            </summary>
        </member>
        <member name="P:Apq.Text.TxtTaskResult.Encoding">
            <summary>
            文件编码格式(检测或转换后有值)
            </summary>
        </member>
        <member name="P:Apq.Text.TxtTaskResult.LineCount">
            <summary>
            总行数
            </summary>
        </member>
        <member name="P:Apq.Text.TxtTaskResult.ErrorLine">
            <summary>
            第几行出错
            </summary>
        </member>
        <member name="T:Apq.TreeNode`1">
            <summary>
            树节点(没有上级就是根节点了)
            </summary>
        </member>
        <member name="P:Apq.TreeNode`1.Data">
            <summary>
            节点的数据
            </summary>
        </member>
        <member name="P:Apq.TreeNode`1.Parent">
            <summary>
            上级节点
            </summary>
        </member>
        <member name="P:Apq.TreeNode`1.Children">
            <summary>
            子级节点
            </summary>
        </member>
        <member name="P:Apq.TreeNode`1.LayerNo">
            <summary>
            当前节点算第几层
            </summary>
            <remarks>一般根节点设为第0层</remarks>
        </member>
        <member name="P:Apq.TreeNode`1.PreNode">
            <summary>
            上一节点
            </summary>
        </member>
        <member name="P:Apq.TreeNode`1.NextNode">
            <summary>
            下一节点
            </summary>
        </member>
        <member name="M:Apq.TreeNode`1.Walk_Depth(System.Action{Apq.TreeNode{`0},System.Int32})">
            <summary>
            深度优先遍历
            </summary>
            <param name="action">(节点,第几个节点)</param>
        </member>
        <member name="M:Apq.TreeNode`1.Walk_Depth_Imp(Apq.TreeNode{`0},System.Action{Apq.TreeNode{`0},System.Int32},Apq.TreeWalkWatcher)">
            <summary>
            [递归]深度优先遍历
            </summary>
            <param name="action">(节点,第几个节点)</param>
        </member>
        <member name="M:Apq.TreeNode`1.Walk_Breadth(System.Action{Apq.TreeNode{`0},System.Int32})">
            <summary>
            广度优先遍历
            </summary>
            <param name="action">(节点,第几个节点)</param>
            <remarks>先深度遍历将结果保存到Dic中,再遍历Dic</remarks>
        </member>
        <member name="M:Apq.TreeNode`1.GetLeafs">
            <summary>
            获取所有叶子节点
            </summary>
            <returns></returns>
        </member>
        <member name="T:Apq.TreeWalkWatcher">
            <summary>
            对树进行遍历时的监视者(观察者)
            </summary>
        </member>
        <member name="P:Apq.TreeWalkWatcher.Count">
            <summary>
            第几次访问节点
            </summary>
        </member>
        <member name="T:Apq.TypeParser">
            <summary>
            C#类型解析,可解析关键字及其数组用法
            </summary>
        </member>
        <member name="M:Apq.TypeParser.IsKeyword(System.String)">
            <summary>
            判断是否是C#关键字
            </summary>
        </member>
        <member name="P:Apq.TypeParser.KeywordMappings">
            <summary>
            获取所有C#关键字与类型的对应关系
            </summary>
        </member>
        <member name="M:Apq.TypeParser.TryGetType(System.String,System.Reflection.Assembly)">
            <summary>
            获取类型(含处理关键字)
            </summary>
        </member>
        <member name="M:Apq.Utils.DateTimeUtil.GetMonday(System.DateTime,System.Boolean)">
            <summary>
            获取所在周的星期一
            </summary>
            <param name="timeZero">是否将Time部分置0</param>
            <remarks>星期一为每周的第1天</remarks>
        </member>
        <member name="M:Apq.Utils.DateTimeUtil.GetSunday(System.DateTime,System.Boolean)">
            <summary>
            获取所在周的星期日
            </summary>
            <param name="timeZero">是否将Time部分置0</param>
            <remarks>星期日为每周的第7天</remarks>
        </member>
        <member name="M:Apq.Utils.DateTimeUtil.GetFirstDayOfMonth(System.DateTime,System.Boolean)">
            <summary>
            获取所在月的第1天
            </summary>
            <param name="timeZero">是否将Time部分置0</param>
            <remarks>1日为每月的第1天</remarks>
        </member>
        <member name="M:Apq.Utils.DateTimeUtil.GetLastDayOfMonth(System.DateTime,System.Boolean)">
            <summary>
            获取所在月的最后1天
            </summary>
            <param name="timeZero">是否将Time部分置0</param>
        </member>
        <member name="M:Apq.Utils.DateTimeUtil.CalcAgeByBirthday(System.DateOnly)">
            <summary>
            根据生日计算当前年龄
            </summary>
        </member>
        <member name="T:Apq.Utils.NateScarlet_HolidayCn">
            <summary>
            使用 https://github.com/NateScarlet/holiday-cn.git 进行节假日判断
            </summary>
            <remarks>https://cdn.jsdelivr.net/gh/NateScarlet/holiday-cn@master/{年份}.json
            https://fastly.jsdelivr.net/gh/NateScarlet/holiday-cn@master/{年份}.json</remarks>
        </member>
        <member name="M:Apq.Utils.NateScarlet_HolidayCn.HolidayOfWeek(System.DateTime)">
            <summary>
            通过接口判断某天是不是中国法定节假日(如果接口访问失败，默认不是)
            </summary>
            <returns>1-7:星期几，10:法定休息日，11:法定工作日</returns>
            <remarks>这个CDN是国外的,所以不定啥时间访问不了。
            改成通过作业定时下载到本地,判断时直接通过本地缓存</remarks>
        </member>
        <member name="M:Apq.Utils.NateScarlet_HolidayCn.HolidayOfWeek(System.DateTime,System.Collections.Generic.IList{System.String})">
            <summary>
            判断某天是不是中国法定节假日(如果缓存文件不存在，默认不是)
            </summary>
            <param name="jsonFiles">本地缓存的json文件的绝对路径(如 D:\2024.json)</param>
            <returns>1-7:星期几，10:法定休息日，11:法定工作日</returns>
        </member>
        <member name="P:Apq.Utils.Util.IsDebug">
            <summary>
            检查当前正在运行的主程序是否是在 Debug 配置下编译生成的。
            </summary>
        </member>
        <member name="M:Apq.Utils.Util.GetCallingMethod">
            <summary>
            获取调用者(方法)
            </summary>
            <remarks>获取当前方法使用MethodBase.GetCurrentMethod()</remarks>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.Int64,System.Int64)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.UInt64,System.UInt64)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.Int32,System.Int32)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.UInt32,System.UInt32)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.Int16,System.Int16)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.UInt16,System.UInt16)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.SByte,System.SByte)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.ExchangeValue(System.Byte,System.Byte)">
            <summary>
            值对调
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
        </member>
        <member name="M:Apq.Utils.Util.IsEquals(System.Object,System.Object)">
            <summary>
            调用Equals方法判断是否相等
            </summary>
        </member>
        <member name="T:Apq.WeekDay">
            <summary>
            按位组合的枚举:星期几
            </summary>
        </member>
        <member name="F:Apq.WeekDay.None">
            <summary>
            未定义
            </summary>
        </member>
        <member name="F:Apq.WeekDay.Monday">
            <summary>
            星期一
            </summary>
        </member>
        <member name="F:Apq.WeekDay.Tuesday">
            <summary>
            星期二
            </summary>
        </member>
        <member name="F:Apq.WeekDay.Wednesday">
            <summary>
            星期三
            </summary>
        </member>
        <member name="F:Apq.WeekDay.Thursday">
            <summary>
            星期四
            </summary>
        </member>
        <member name="F:Apq.WeekDay.Friday">
            <summary>
            星期五
            </summary>
        </member>
        <member name="F:Apq.WeekDay.Saturday">
            <summary>
            星期六
            </summary>
        </member>
        <member name="F:Apq.WeekDay.Sunday">
            <summary>
            星期日
            </summary>
        </member>
        <member name="F:Apq.WeekDay.All">
            <summary>
            星期内每天
            </summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_NL_0">
            <summary>Custom <see cref="T:System.Text.RegularExpressions.Regex"/>-derived type for the Reg_NL method.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Reg_NL_0.Instance">
            <summary>Cached, thread-safe singleton instance.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_NL_0.#ctor">
            <summary>Initializes the instance.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_NL_0.RunnerFactory">
            <summary>Provides a factory for creating <see cref="T:System.Text.RegularExpressions.RegexRunner"/> instances to be used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_NL_0.RunnerFactory.CreateInstance">
            <summary>Creates an instance of a <see cref="T:System.Text.RegularExpressions.RegexRunner"/> used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_NL_0.RunnerFactory.Runner">
            <summary>Provides the runner that contains the custom logic implementing the specified regular expression.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_NL_0.RunnerFactory.Runner.Scan(System.ReadOnlySpan{System.Char})">
            <summary>Scan the <paramref name="inputSpan"/> starting from base.runtextstart for the next match.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_NL_0.RunnerFactory.Runner.TryFindNextPossibleStartingPosition(System.ReadOnlySpan{System.Char})">
            <summary>Search <paramref name="inputSpan"/> starting from base.runtextpos for the next location a match could possibly start.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if a possible match was found; false if no more matches are possible.</returns>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_s_1">
            <summary>Custom <see cref="T:System.Text.RegularExpressions.Regex"/>-derived type for the Reg_s method.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Reg_s_1.Instance">
            <summary>Cached, thread-safe singleton instance.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_s_1.#ctor">
            <summary>Initializes the instance.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_s_1.RunnerFactory">
            <summary>Provides a factory for creating <see cref="T:System.Text.RegularExpressions.RegexRunner"/> instances to be used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_s_1.RunnerFactory.CreateInstance">
            <summary>Creates an instance of a <see cref="T:System.Text.RegularExpressions.RegexRunner"/> used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_s_1.RunnerFactory.Runner">
            <summary>Provides the runner that contains the custom logic implementing the specified regular expression.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_s_1.RunnerFactory.Runner.Scan(System.ReadOnlySpan{System.Char})">
            <summary>Scan the <paramref name="inputSpan"/> starting from base.runtextstart for the next match.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_s_1.RunnerFactory.Runner.TryFindNextPossibleStartingPosition(System.ReadOnlySpan{System.Char})">
            <summary>Search <paramref name="inputSpan"/> starting from base.runtextpos for the next location a match could possibly start.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if a possible match was found; false if no more matches are possible.</returns>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_s_1.RunnerFactory.Runner.TryMatchAtCurrentPosition(System.ReadOnlySpan{System.Char})">
            <summary>Determine whether <paramref name="inputSpan"/> at base.runtextpos is a match for the regular expression.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if the regular expression matches at the current position; otherwise, false.</returns>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_GO_2">
            <summary>Custom <see cref="T:System.Text.RegularExpressions.Regex"/>-derived type for the Reg_GO method.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Reg_GO_2.Instance">
            <summary>Cached, thread-safe singleton instance.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GO_2.#ctor">
            <summary>Initializes the instance.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_GO_2.RunnerFactory">
            <summary>Provides a factory for creating <see cref="T:System.Text.RegularExpressions.RegexRunner"/> instances to be used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GO_2.RunnerFactory.CreateInstance">
            <summary>Creates an instance of a <see cref="T:System.Text.RegularExpressions.RegexRunner"/> used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_GO_2.RunnerFactory.Runner">
            <summary>Provides the runner that contains the custom logic implementing the specified regular expression.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GO_2.RunnerFactory.Runner.Scan(System.ReadOnlySpan{System.Char})">
            <summary>Scan the <paramref name="inputSpan"/> starting from base.runtextstart for the next match.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GO_2.RunnerFactory.Runner.TryFindNextPossibleStartingPosition(System.ReadOnlySpan{System.Char})">
            <summary>Search <paramref name="inputSpan"/> starting from base.runtextpos for the next location a match could possibly start.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if a possible match was found; false if no more matches are possible.</returns>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GO_2.RunnerFactory.Runner.TryMatchAtCurrentPosition(System.ReadOnlySpan{System.Char})">
            <summary>Determine whether <paramref name="inputSpan"/> at base.runtextpos is a match for the regular expression.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if the regular expression matches at the current position; otherwise, false.</returns>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_GONL_3">
            <summary>Custom <see cref="T:System.Text.RegularExpressions.Regex"/>-derived type for the Reg_GONL method.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Reg_GONL_3.Instance">
            <summary>Cached, thread-safe singleton instance.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GONL_3.#ctor">
            <summary>Initializes the instance.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_GONL_3.RunnerFactory">
            <summary>Provides a factory for creating <see cref="T:System.Text.RegularExpressions.RegexRunner"/> instances to be used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GONL_3.RunnerFactory.CreateInstance">
            <summary>Creates an instance of a <see cref="T:System.Text.RegularExpressions.RegexRunner"/> used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Reg_GONL_3.RunnerFactory.Runner">
            <summary>Provides the runner that contains the custom logic implementing the specified regular expression.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GONL_3.RunnerFactory.Runner.Scan(System.ReadOnlySpan{System.Char})">
            <summary>Scan the <paramref name="inputSpan"/> starting from base.runtextstart for the next match.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GONL_3.RunnerFactory.Runner.TryFindNextPossibleStartingPosition(System.ReadOnlySpan{System.Char})">
            <summary>Search <paramref name="inputSpan"/> starting from base.runtextpos for the next location a match could possibly start.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if a possible match was found; false if no more matches are possible.</returns>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Reg_GONL_3.RunnerFactory.Runner.TryMatchAtCurrentPosition(System.ReadOnlySpan{System.Char})">
            <summary>Determine whether <paramref name="inputSpan"/> at base.runtextpos is a match for the regular expression.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if the regular expression matches at the current position; otherwise, false.</returns>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Regex_Cn_4">
            <summary>Custom <see cref="T:System.Text.RegularExpressions.Regex"/>-derived type for the Regex_Cn method.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Regex_Cn_4.Instance">
            <summary>Cached, thread-safe singleton instance.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_Cn_4.#ctor">
            <summary>Initializes the instance.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Regex_Cn_4.RunnerFactory">
            <summary>Provides a factory for creating <see cref="T:System.Text.RegularExpressions.RegexRunner"/> instances to be used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_Cn_4.RunnerFactory.CreateInstance">
            <summary>Creates an instance of a <see cref="T:System.Text.RegularExpressions.RegexRunner"/> used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Regex_Cn_4.RunnerFactory.Runner">
            <summary>Provides the runner that contains the custom logic implementing the specified regular expression.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_Cn_4.RunnerFactory.Runner.Scan(System.ReadOnlySpan{System.Char})">
            <summary>Scan the <paramref name="inputSpan"/> starting from base.runtextstart for the next match.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_Cn_4.RunnerFactory.Runner.TryFindNextPossibleStartingPosition(System.ReadOnlySpan{System.Char})">
            <summary>Search <paramref name="inputSpan"/> starting from base.runtextpos for the next location a match could possibly start.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if a possible match was found; false if no more matches are possible.</returns>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_Cn_4.RunnerFactory.Runner.TryMatchAtCurrentPosition(System.ReadOnlySpan{System.Char})">
            <summary>Determine whether <paramref name="inputSpan"/> at base.runtextpos is a match for the regular expression.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if the regular expression matches at the current position; otherwise, false.</returns>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Regex_IP4_5">
            <summary>Custom <see cref="T:System.Text.RegularExpressions.Regex"/>-derived type for the Regex_IP4 method.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Regex_IP4_5.Instance">
            <summary>Cached, thread-safe singleton instance.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_IP4_5.#ctor">
            <summary>Initializes the instance.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Regex_IP4_5.RunnerFactory">
            <summary>Provides a factory for creating <see cref="T:System.Text.RegularExpressions.RegexRunner"/> instances to be used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_IP4_5.RunnerFactory.CreateInstance">
            <summary>Creates an instance of a <see cref="T:System.Text.RegularExpressions.RegexRunner"/> used by methods on <see cref="T:System.Text.RegularExpressions.Regex"/>.</summary>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Regex_IP4_5.RunnerFactory.Runner">
            <summary>Provides the runner that contains the custom logic implementing the specified regular expression.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_IP4_5.RunnerFactory.Runner.Scan(System.ReadOnlySpan{System.Char})">
            <summary>Scan the <paramref name="inputSpan"/> starting from base.runtextstart for the next match.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_IP4_5.RunnerFactory.Runner.TryFindNextPossibleStartingPosition(System.ReadOnlySpan{System.Char})">
            <summary>Search <paramref name="inputSpan"/> starting from base.runtextpos for the next location a match could possibly start.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if a possible match was found; false if no more matches are possible.</returns>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Regex_IP4_5.RunnerFactory.Runner.TryMatchAtCurrentPosition(System.ReadOnlySpan{System.Char})">
            <summary>Determine whether <paramref name="inputSpan"/> at base.runtextpos is a match for the regular expression.</summary>
            <param name="inputSpan">The text being scanned by the regular expression.</param>
            <returns>true if the regular expression matches at the current position; otherwise, false.</returns>
        </member>
        <member name="T:System.Text.RegularExpressions.Generated.Utilities">
            <summary>Helper methods used by generated <see cref="T:System.Text.RegularExpressions.Regex"/>-derived implementations.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Utilities.s_defaultTimeout">
            <summary>Default timeout value set in <see cref="T:System.AppContext"/>, or <see cref="F:System.Text.RegularExpressions.Regex.InfiniteMatchTimeout"/> if none was set.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Utilities.s_hasTimeout">
            <summary>Whether <see cref="F:System.Text.RegularExpressions.Generated.Utilities.s_defaultTimeout"/> is non-infinite.</summary>
        </member>
        <member name="M:System.Text.RegularExpressions.Generated.Utilities.IndexOfAnyWhiteSpace(System.ReadOnlySpan{System.Char})">
            <summary>Finds the next index of any character that matches a whitespace character.</summary>
        </member>
        <member name="F:System.Text.RegularExpressions.Generated.Utilities.s_asciiExceptWhiteSpace">
            <summary>Supports searching for characters in or not in "\0\u0001\u0002\u0003\u0004\u0005\u0006\a\b\u000e\u000f\u0010\u0011\u0012\u0013\u0014\u0015\u0016\u0017\u0018\u0019\u001a\u001b\u001c\u001d\u001e\u001f!\"#$%&amp;'()*+,-./0123456789:;&lt;=&gt;?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~\u007f".</summary>
        </member>
    </members>
</doc>