Merge branch 'acmesh-official:dev' into dev

.github/FUNDING.yml

@@ -3,7 +3,7 @@
 github: # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
 patreon: # Replace with a single Patreon username
 open_collective: acmesh
-ko_fi: # Replace with a single Ko-fi username
+ko_fi: neilpang
 tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
 community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
 liberapay: # Replace with a single Liberapay username

.github/auto-comment.yml

@@ -1,40 +0,0 @@
-# Comment to a new issue.
-issuesOpened: >
-  If this is a bug report, please upgrade to the latest code and try again:
-  
-  如果有 bug, 请先更新到最新版试试:
-  
-  ```
-  acme.sh --upgrade
-  ```
-  
-  please also provide the log with `--debug 2`.
-  
-  同时请提供调试输出 `--debug 2`
-  
-  see: https://github.com/acmesh-official/acme.sh/wiki/How-to-debug-acme.sh
-  
-  Without `--debug 2` log, your issue will NEVER get replied.
-  
-  没有调试输出, 你的 issue 不会得到任何解答.
-
-
-pullRequestOpened: >
-  First, NEVER send a PR to `master` branch, it will NEVER be accepted. Please send to the `dev` branch instead.
-  
-  If this is a PR to support new DNS API or new notification API, please read this guide first:
-  https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Dev-Guide
-  
-  Please check the guide items one by one.
-  
-  Then add your usage here:
-  https://github.com/acmesh-official/acme.sh/wiki/dnsapi
-   
-  Or some other wiki pages:
-  
-  https://github.com/acmesh-official/acme.sh/wiki/deployhooks
-  
-  https://github.com/acmesh-official/acme.sh/wiki/notify
-  
-
-

.github/workflows/DNS.yml

@@ -1,211 +1,465 @@
-name: DNS
-on:
-  push:
-    paths:
-      - 'dnsapi/*.sh'
-      - '.github/workflows/DNS.yml'
-  pull_request:
-    branches:
-      - 'dev'
-    paths:
-      - 'dnsapi/*.sh'
-      - '.github/workflows/DNS.yml'
-
-
-jobs:
-  CheckToken:
-    runs-on: ubuntu-latest
-    outputs:
-      hasToken: ${{ steps.step_one.outputs.hasToken }}
-    steps:
-      - name: Set the value
-        id: step_one
-        run: |
-          if [ "${{secrets.TokenName1}}" ] ; then
-            echo "::set-output name=hasToken::true"
-          else
-            echo "::set-output name=hasToken::false"
-          fi
-      - name: Check the value
-        run: echo ${{ steps.step_one.outputs.hasToken }}
-
-  Fail:
-    runs-on: ubuntu-latest
-    needs: CheckToken
-    if: "contains(needs.CheckToken.outputs.hasToken, 'false')"
-    steps:
-    - name: "Read this:   https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Test"
-      run: |
-        echo "Read this:   https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Test"
-        if [ "${{github.actor}}" != "Neilpang" ]; then
-          false
-        fi
-
-  Docker:
-    runs-on: ubuntu-latest
-    needs: CheckToken
-    if: "contains(needs.CheckToken.outputs.hasToken, 'true')"
-    env:
-      TEST_DNS : ${{ secrets.TEST_DNS }}
-      TestingDomain: ${{ secrets.TestingDomain }}
-      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
-      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
-      CASE: le_test_dnsapi
-      TEST_LOCAL: 1
-      DEBUG: 1
-    steps:
-    - uses: actions/checkout@v2
-    - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - name: Set env file
-      run: |
-        cd ../acmetest 
-        if [ "${{ secrets.TokenName1}}" ] ; then
-          echo "${{ secrets.TokenName1}}=${{ secrets.TokenValue1}}" >> env.list
-        fi
-        if [ "${{ secrets.TokenName2}}" ] ; then
-          echo "${{ secrets.TokenName2}}=${{ secrets.TokenValue2}}" >> env.list
-        fi
-        if [ "${{ secrets.TokenName3}}" ] ; then
-          echo "${{ secrets.TokenName3}}=${{ secrets.TokenValue3}}" >> env.list
-        fi
-        if [ "${{ secrets.TokenName4}}" ] ; then
-          echo "${{ secrets.TokenName4}}=${{ secrets.TokenValue4}}" >> env.list
-        fi
-        if [ "${{ secrets.TokenName5}}" ] ; then
-          echo "${{ secrets.TokenName5}}=${{ secrets.TokenValue5}}" >> env.list
-        fi
-        echo "TEST_DNS_NO_WILDCARD" >> env.list 
-        echo "TEST_DNS_SLEEP" >> env.list
-    - name: Run acmetest
-      run: cd ../acmetest && ./rundocker.sh  testall
-
-  MacOS:
-    runs-on: macos-latest
-    needs: Docker
-    env:
-      TEST_DNS : ${{ secrets.TEST_DNS }}
-      TestingDomain: ${{ secrets.TestingDomain }}
-      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
-      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
-      CASE: le_test_dnsapi
-      TEST_LOCAL: 1
-      DEBUG: 1
-    steps:
-    - uses: actions/checkout@v2
-    - name: Install tools
-      run:  brew update && brew install socat;
-    - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - name: Run acmetest
-      run: |
-        if [ "${{ secrets.TokenName1}}" ] ; then
-          export ${{ secrets.TokenName1}}=${{ secrets.TokenValue1}}
-        fi
-        if [ "${{ secrets.TokenName2}}" ] ; then
-          export ${{ secrets.TokenName2}}=${{ secrets.TokenValue2}}
-        fi
-        if [ "${{ secrets.TokenName3}}" ] ; then
-          export ${{ secrets.TokenName3}}=${{ secrets.TokenValue3}}
-        fi
-        if [ "${{ secrets.TokenName4}}" ] ; then
-          export ${{ secrets.TokenName4}}=${{ secrets.TokenValue4}}
-        fi
-        if [ "${{ secrets.TokenName5}}" ] ; then
-          export ${{ secrets.TokenName5}}=${{ secrets.TokenValue5}}
-        fi
-        cd ../acmetest
-        ./letest.sh
-
-  Windows:
-    runs-on: windows-latest
-    needs: MacOS
-    env:
-      TEST_DNS : ${{ secrets.TEST_DNS }}
-      TestingDomain: ${{ secrets.TestingDomain }}
-      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
-      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
-      CASE: le_test_dnsapi
-      TEST_LOCAL: 1
-      DEBUG: 1
-    steps:
-    - name: Set git to use LF
-      run: |
-          git config --global core.autocrlf false
-    - uses: actions/checkout@v2
-    - name: Install cygwin base packages with chocolatey
-      run: |
-          choco config get cacheLocation
-          choco install --no-progress cygwin
-      shell: cmd
-    - name: Install cygwin additional packages
-      run: |
-          C:\tools\cygwin\cygwinsetup.exe -qgnNdO -R C:/tools/cygwin -s http://mirrors.kernel.org/sourceware/cygwin/ -P socat,curl,cron,unzip,git
-      shell: cmd
-    - name: Set ENV
-      run: |
-          echo '::set-env name=PATH::C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin'
-    - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - name: Run acmetest
-      shell: bash
-      run: |
-        if [ "${{ secrets.TokenName1}}" ] ; then
-          export ${{ secrets.TokenName1}}=${{ secrets.TokenValue1}}
-        fi
-        if [ "${{ secrets.TokenName2}}" ] ; then
-          export ${{ secrets.TokenName2}}=${{ secrets.TokenValue2}}
-        fi
-        if [ "${{ secrets.TokenName3}}" ] ; then
-          export ${{ secrets.TokenName3}}=${{ secrets.TokenValue3}}
-        fi
-        if [ "${{ secrets.TokenName4}}" ] ; then
-          export ${{ secrets.TokenName4}}=${{ secrets.TokenValue4}}
-        fi
-        if [ "${{ secrets.TokenName5}}" ] ; then
-          export ${{ secrets.TokenName5}}=${{ secrets.TokenValue5}}
-        fi
-        cd ../acmetest
-        ./letest.sh
-
-  FreeBSD:
-    runs-on: macos-latest
-    needs: Windows
-    env:
-      TEST_DNS : ${{ secrets.TEST_DNS }}
-      TestingDomain: ${{ secrets.TestingDomain }}
-      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
-      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
-      CASE: le_test_dnsapi
-      TEST_LOCAL: 1
-      DEBUG: 1
-    steps:
-    - uses: actions/checkout@v2
-    - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - uses: vmactions/[email protected]
-      with:
-        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
-        prepare: pkg install -y socat curl
-        usesh: true
-        run: |
-          if [ "${{ secrets.TokenName1}}" ] ; then
-            export ${{ secrets.TokenName1}}=${{ secrets.TokenValue1}}
-          fi
-          if [ "${{ secrets.TokenName2}}" ] ; then
-            export ${{ secrets.TokenName2}}=${{ secrets.TokenValue2}}
-          fi
-          if [ "${{ secrets.TokenName3}}" ] ; then
-            export ${{ secrets.TokenName3}}=${{ secrets.TokenValue3}}
-          fi
-          if [ "${{ secrets.TokenName4}}" ] ; then
-            export ${{ secrets.TokenName4}}=${{ secrets.TokenValue4}}
-          fi
-          if [ "${{ secrets.TokenName5}}" ] ; then
-            export ${{ secrets.TokenName5}}=${{ secrets.TokenValue5}}
-          fi
-          cd ../acmetest
-          ./letest.sh
-
-
-        
+name: DNS
+on:
+  push:
+    paths:
+      - 'dnsapi/*.sh'
+      - '.github/workflows/DNS.yml'
+  pull_request:
+    branches:
+      - 'dev'
+    paths:
+      - 'dnsapi/*.sh'
+      - '.github/workflows/DNS.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  CheckToken:
+    runs-on: ubuntu-latest
+    outputs:
+      hasToken: ${{ steps.step_one.outputs.hasToken }}
+    steps:
+      - name: Set the value
+        id: step_one
+        run: |
+          if [ "${{secrets.TokenName1}}" ] ; then
+            echo "::set-output name=hasToken::true"
+          else
+            echo "::set-output name=hasToken::false"
+          fi
+      - name: Check the value
+        run: echo ${{ steps.step_one.outputs.hasToken }}
+
+  Fail:
+    runs-on: ubuntu-latest
+    needs: CheckToken
+    if: "contains(needs.CheckToken.outputs.hasToken, 'false')"
+    steps:
+    - name: "Read this:   https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Test"
+      run: |
+        echo "Read this:   https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Test"
+        if [ "${{github.repository_owner}}" != "acmesh-official" ]; then
+          false
+        fi
+
+  Docker:
+    runs-on: ubuntu-latest
+    needs: CheckToken
+    if: "contains(needs.CheckToken.outputs.hasToken, 'true')"
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - name: Set env file
+      run: |
+        cd ../acmetest
+        if [ "${{ secrets.TokenName1}}" ] ; then
+          echo "${{ secrets.TokenName1}}=${{ secrets.TokenValue1}}" >> docker.env
+        fi
+        if [ "${{ secrets.TokenName2}}" ] ; then
+          echo "${{ secrets.TokenName2}}=${{ secrets.TokenValue2}}" >> docker.env
+        fi
+        if [ "${{ secrets.TokenName3}}" ] ; then
+          echo "${{ secrets.TokenName3}}=${{ secrets.TokenValue3}}" >> docker.env
+        fi
+        if [ "${{ secrets.TokenName4}}" ] ; then
+          echo "${{ secrets.TokenName4}}=${{ secrets.TokenValue4}}" >> docker.env
+        fi
+        if [ "${{ secrets.TokenName5}}" ] ; then
+          echo "${{ secrets.TokenName5}}=${{ secrets.TokenValue5}}" >> docker.env
+        fi
+
+    - name: Run acmetest
+      run: cd ../acmetest && ./rundocker.sh  testall
+
+
+
+
+  MacOS:
+    runs-on: macos-latest
+    needs: Docker
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Install tools
+      run:  brew install socat
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      run: |
+        if [ "${{ secrets.TokenName1}}" ] ; then
+          export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+        fi
+        if [ "${{ secrets.TokenName2}}" ] ; then
+          export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+        fi
+        if [ "${{ secrets.TokenName3}}" ] ; then
+          export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+        fi
+        if [ "${{ secrets.TokenName4}}" ] ; then
+          export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+        fi
+        if [ "${{ secrets.TokenName5}}" ] ; then
+          export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+        fi
+        cd ../acmetest
+        ./letest.sh
+
+
+
+
+  Windows:
+    runs-on: windows-latest
+    needs: MacOS
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - name: Set git to use LF
+      run: |
+          git config --global core.autocrlf false
+    - uses: actions/checkout@v3
+    - name: Install cygwin base packages with chocolatey
+      run: |
+          choco config get cacheLocation
+          choco install --no-progress cygwin
+      shell: cmd
+    - name: Install cygwin additional packages
+      run: |
+          C:\tools\cygwin\cygwinsetup.exe -qgnNdO -R C:/tools/cygwin -s https://mirrors.kernel.org/sourceware/cygwin/ -P socat,curl,cron,unzip,git
+      shell: cmd
+    - name: Set ENV
+      shell: cmd
+      run: |
+          echo PATH=C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin >> %GITHUB_ENV%
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      shell: bash
+      run: |
+        if [ "${{ secrets.TokenName1}}" ] ; then
+          export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+        fi
+        if [ "${{ secrets.TokenName2}}" ] ; then
+          export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+        fi
+        if [ "${{ secrets.TokenName3}}" ] ; then
+          export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+        fi
+        if [ "${{ secrets.TokenName4}}" ] ; then
+          export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+        fi
+        if [ "${{ secrets.TokenName5}}" ] ; then
+          export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+        fi
+        cd ../acmetest
+        ./letest.sh
+
+
+
+  FreeBSD:
+    runs-on: macos-12
+    needs: Windows
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/freebsd-vm@v0
+      with:
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        prepare: pkg install -y socat curl
+        usesh: true
+        copyback: false
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+
+
+
+
+  OpenBSD:
+    runs-on: macos-12
+    needs: FreeBSD
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/openbsd-vm@v0
+      with:
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        prepare: pkg_add socat curl
+        usesh: true
+        copyback: false
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+
+
+
+
+  NetBSD:
+    runs-on: macos-12
+    needs: OpenBSD
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/netbsd-vm@v0
+      with:
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        prepare: |
+          pkg_add curl socat
+        usesh: true
+        copyback: false
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+
+
+
+
+  DragonFlyBSD:
+    runs-on: macos-12
+    needs: NetBSD
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/dragonflybsd-vm@v0
+      with:
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        prepare: |
+          pkg install -y curl socat
+        usesh: true
+        copyback: false
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+
+
+
+
+
+
+
+  Solaris:
+    runs-on: macos-12
+    needs: DragonFlyBSD
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      HTTPS_INSECURE: 1 # always set to 1 to ignore https error, since Solaris doesn't accept the expired ISRG X1 root
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/solaris-vm@v0
+      with:
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        copyback: false
+        prepare: pkgutil -y -i socat
+        run: |
+          pkg set-mediator -v -I [email protected] openssl
+          export PATH=/usr/gnu/bin:$PATH
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+
+

.github/workflows/DragonFlyBSD.yml

@@ -0,0 +1,71 @@
+name: DragonFlyBSD
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/DragonFlyBSD.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/DragonFlyBSD.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+
+jobs:
+  DragonFlyBSD:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_EMAIL: "[email protected]"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: macos-12
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+    steps:
+    - uses: actions/checkout@v3
+    - uses: vmactions/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/dragonflybsd-vm@v0
+      with:
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN'
+        copyback: "false"
+        nat: |
+          "8080": "80"
+        prepare: |
+          pkg install -y curl socat
+        usesh: true
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+
+

.github/workflows/FreeBSD.yml

@@ -0,0 +1,76 @@
+name: FreeBSD
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/FreeBSD.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/FreeBSD.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  FreeBSD:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+           ACME_USE_WGET: 1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_EMAIL: "[email protected]"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: macos-12
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v3
+    - uses: vmactions/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/freebsd-vm@v0
+      with:
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: pkg install -y socat curl wget
+        usesh: true
+        copyback: false
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+
+

.github/workflows/LetsEncrypt.yml

@@ -1,116 +0,0 @@
-name: LetsEncrypt
-on:
-  push:
-    branches:
-      - '*'
-    paths:
-      - '**.sh'
-      - '**.yml'
-  pull_request:
-    branches:
-      - dev
-    paths:
-      - '**.sh'
-      - '**.yml'
-
-
-jobs:
-  CheckToken:
-    runs-on: ubuntu-latest
-    outputs:
-      hasToken: ${{ steps.step_one.outputs.hasToken }}
-    env: 
-      NGROK_TOKEN : ${{ secrets.NGROK_TOKEN }}
-    steps:
-      - name: Set the value
-        id: step_one
-        run: |
-          if [ "$NGROK_TOKEN" ] ; then
-            echo "::set-output name=hasToken::true"
-          else
-            echo "::set-output name=hasToken::false"
-          fi
-      - name: Check the value
-        run: echo ${{ steps.step_one.outputs.hasToken }}
-
-  Ubuntu:
-    runs-on: ubuntu-latest
-    needs: CheckToken
-    if: "contains(needs.CheckToken.outputs.hasToken, 'true')"
-    env:
-      NGROK_TOKEN : ${{ secrets.NGROK_TOKEN }}
-      TEST_LOCAL: 1
-    steps:
-    - uses: actions/checkout@v2
-    - name: Install tools
-      run: sudo apt-get install -y socat
-    - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - name: Run acmetest
-      run: cd ../acmetest && sudo --preserve-env ./letest.sh
-
-  MacOS:
-    runs-on: macos-latest
-    needs: Ubuntu
-    env:
-      NGROK_TOKEN : ${{ secrets.NGROK_TOKEN }}
-      TEST_LOCAL: 1
-    steps:
-    - uses: actions/checkout@v2
-    - name: Install tools
-      run:  brew update && brew install socat;
-    - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - name: Run acmetest
-      run: cd ../acmetest && sudo --preserve-env ./letest.sh
-
-  Windows:
-    runs-on: windows-latest
-    needs: MacOS
-    env:
-      NGROK_TOKEN : ${{ secrets.NGROK_TOKEN }}
-      TEST_LOCAL: 1
-      #The 80 port is used by Windows server, we have to use a custom port, ngrok will also use this port.
-      Le_HTTPPort: 8888
-    steps:
-    - name: Set git to use LF
-      run: |
-          git config --global core.autocrlf false
-    - uses: actions/checkout@v2
-    - name: Install cygwin base packages with chocolatey
-      run: |
-          choco config get cacheLocation
-          choco install --no-progress cygwin
-      shell: cmd
-    - name: Install cygwin additional packages
-      run: |
-          C:\tools\cygwin\cygwinsetup.exe -qgnNdO -R C:/tools/cygwin -s http://mirrors.kernel.org/sourceware/cygwin/ -P socat,curl,cron,unzip,git
-      shell: cmd
-    - name: Set ENV
-      run: |
-          echo '::set-env name=PATH::C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin'
-    - name: Clone acmetest
-      shell: cmd
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - name: Run acmetest
-      shell: cmd
-      run: cd ../acmetest && bash.exe -c ./letest.sh
-
-  FreeBSD:
-    runs-on: macos-latest
-    needs: Windows
-    env:
-      NGROK_TOKEN : ${{ secrets.NGROK_TOKEN }}
-      TEST_LOCAL: 1
-    steps:
-    - uses: actions/checkout@v2
-    - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - uses: vmactions/[email protected]
-      with:
-        envs: 'NGROK_TOKEN TEST_LOCAL'
-        prepare: pkg install -y socat curl
-        usesh: true
-        run: |
-          cd ../acmetest && ./letest.sh
-

.github/workflows/Linux.yml

@@ -0,0 +1,48 @@
+name: Linux
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/Linux.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Linux.yml'
+
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+
+jobs:
+  Linux:
+    strategy:
+      matrix:
+        os: ["ubuntu:latest", "debian:latest", "almalinux:latest", "fedora:latest", "centos:7", "opensuse/leap:latest", "alpine:latest", "oraclelinux:8", "kalilinux/kali", "archlinux:latest", "mageia", "gentoo/stage3"]
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+      TEST_ACME_Server: "LetsEncrypt.org_test"
+    steps:
+    - uses: actions/checkout@v3
+    - name: Clone acmetest
+      run: |
+          cd .. \
+          && git clone --depth=1 https://github.com/acmesh-official/acmetest.git \
+          && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      run: |
+          cd ../acmetest \
+          && ./rundocker.sh  testplat ${{ matrix.os }}
+
+
+

.github/workflows/MacOS.yml

@@ -0,0 +1,60 @@
+name: MacOS
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/MacOS.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/MacOS.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  MacOS:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_EMAIL: "[email protected]"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: macos-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Install tools
+      run:  brew install socat
+    - name: Clone acmetest
+      run: |
+          cd .. \
+          && git clone --depth=1 https://github.com/acmesh-official/acmetest.git \
+          && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      run: |
+          cd ../acmetest \
+          && sudo --preserve-env ./letest.sh
+
+

.github/workflows/NetBSD.yml

@@ -0,0 +1,71 @@
+name: NetBSD
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/NetBSD.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/NetBSD.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+
+jobs:
+  NetBSD:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_EMAIL: "[email protected]"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: macos-12
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+    steps:
+    - uses: actions/checkout@v3
+    - uses: vmactions/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/netbsd-vm@v0
+      with:
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN'
+        nat: |
+          "8080": "80"
+        prepare: |
+          pkg_add curl socat
+        usesh: true
+        copyback: false
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+
+

.github/workflows/OpenBSD.yml

@@ -0,0 +1,76 @@
+name: OpenBSD
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/OpenBSD.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/OpenBSD.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  OpenBSD:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+           ACME_USE_WGET: 1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_EMAIL: "[email protected]"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: macos-12
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v3
+    - uses: vmactions/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/openbsd-vm@v0
+      with:
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: pkg_add socat curl wget
+        usesh: true
+        copyback: false
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+
+

.github/workflows/PebbleStrict.yml

@@ -4,14 +4,21 @@ on:
     branches:
       - '*'
     paths:
-      - '**.sh'
-      - '**.yml'
+      - '*.sh'
+      - '.github/workflows/PebbleStrict.yml'
   pull_request:
     branches:
       - dev
     paths:
-      - '**.sh'
-      - '**.yml'
+      - '*.sh'
+      - '.github/workflows/PebbleStrict.yml'
+
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
 
 jobs:
   PebbleStrict:
@@ -19,14 +26,14 @@ jobs:
     env:
       TestingDomain: example.com
       TestingAltDomains: www.example.com
-      ACME_DIRECTORY: https://localhost:14000/dir
+      TEST_ACME_Server: https://localhost:14000/dir
       HTTPS_INSECURE: 1
       Le_HTTPPort: 5002
       TEST_LOCAL: 1
       TEST_CA: "Pebble Intermediate CA"
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
     - name: Install tools
       run: sudo apt-get install -y socat
     - name: Run Pebble
@@ -34,6 +41,32 @@ jobs:
     - name: Set up Pebble
       run: curl --request POST --data '{"ip":"10.30.50.1"}' http://localhost:8055/set-default-ipv4
     - name: Clone acmetest
-      run: cd .. && git clone https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      run: cd ../acmetest && ./letest.sh
+
+  PebbleStrict_IPCert:
+    runs-on: ubuntu-latest
+    env:
+      TestingDomain: 1.23.45.67
+      TEST_ACME_Server: https://localhost:14000/dir
+      HTTPS_INSECURE: 1
+      Le_HTTPPort: 5002
+      Le_TLSPort: 5001
+      TEST_LOCAL: 1
+      TEST_CA: "Pebble Intermediate CA"
+      TEST_IPCERT: 1
+
+    steps:
+    - uses: actions/checkout@v3
+    - name: Install tools
+      run: sudo apt-get install -y socat
+    - name: Run Pebble
+      run: |
+        docker run --rm -itd --name=pebble \
+        -e PEBBLE_VA_ALWAYS_VALID=1 \
+        -p 14000:14000 -p 15000:15000   letsencrypt/pebble:latest pebble -config /test/config/pebble-config.json -strict
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - name: Run acmetest
       run: cd ../acmetest && ./letest.sh

.github/workflows/Solaris.yml

@@ -0,0 +1,74 @@
+name: Solaris
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/Solaris.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Solaris.yml'
+
+
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  Solaris:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+           ACME_USE_WGET: 1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_EMAIL: "[email protected]"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: macos-12
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v3
+    - uses: vmactions/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/solaris-vm@v0
+      with:
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        copyback: "false"
+        nat: |
+          "8080": "80"
+        prepare: pkgutil -y -i socat curl wget
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+

.github/workflows/Ubuntu.yml

@@ -0,0 +1,103 @@
+name: Ubuntu
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/Ubuntu.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Ubuntu.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  Ubuntu:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+           ACME_USE_WGET: 1
+         - TEST_ACME_Server: "ZeroSSL.com"
+           CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+           CA: "ZeroSSL RSA Domain Secure Site CA"
+           CA_EMAIL: "[email protected]"
+           TEST_PREFERRED_CHAIN: ""
+         - TEST_ACME_Server: "https://localhost:9000/acme/acme/directory"
+           CA_ECDSA: "Smallstep Intermediate CA"
+           CA: "Smallstep Intermediate CA"
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: ""
+           NO_REVOKE: 1
+         - TEST_ACME_Server: "https://localhost:9000/acme/acme/directory"
+           CA_ECDSA: "Smallstep Intermediate CA"
+           CA: "Smallstep Intermediate CA"
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: ""
+           NO_REVOKE: 1
+           TEST_IPCERT: 1
+           TestingDomain: "172.17.0.1"
+
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      NO_ECC_384: ${{ matrix.NO_ECC_384 }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      NO_REVOKE: ${{ matrix.NO_REVOKE }}
+      TEST_IPCERT: ${{ matrix.TEST_IPCERT }}
+      TestingDomain: ${{ matrix.TestingDomain }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v3
+    - name: Install tools
+      run: sudo apt-get install -y socat wget
+    - name: Start StepCA
+      if: ${{ matrix.TEST_ACME_Server=='https://localhost:9000/acme/acme/directory' }}
+      run: |
+           docker run --rm -d \
+            -p 9000:9000 \
+            -e "DOCKER_STEPCA_INIT_NAME=Smallstep" \
+            -e "DOCKER_STEPCA_INIT_DNS_NAMES=localhost,$(hostname -f)" \
+            -e "DOCKER_STEPCA_INIT_REMOTE_MANAGEMENT=true" \
+            -e "DOCKER_STEPCA_INIT_PASSWORD=test" \
+            --name stepca \
+            smallstep/step-ca:0.23.1
+
+            sleep 5
+            docker exec  stepca bash -c "echo test >test" \
+            && docker exec stepca step ca provisioner add acme --type ACME --admin-subject  step --admin-password-file=/home/step/test \
+            && docker exec  stepca kill -1 1 \
+            && docker exec  stepca cat /home/step/certs/root_ca.crt | sudo bash -c "cat - >>/etc/ssl/certs/ca-certificates.crt"
+    - name: Clone acmetest
+      run: |
+          cd .. \
+          && git clone --depth=1 https://github.com/acmesh-official/acmetest.git \
+          && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      run: |
+          cd ../acmetest \
+          && sudo --preserve-env ./letest.sh
+
+

.github/workflows/Windows.yml

@@ -0,0 +1,78 @@
+name: Windows
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/Windows.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Windows.yml'
+
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+jobs:
+  Windows:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
+         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_EMAIL: "[email protected]"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: windows-latest
+    env:
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_LOCAL: 1
+      #The 80 port is used by Windows server, we have to use a custom port, tunnel will also use this port.
+      Le_HTTPPort: 8888
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+    steps:
+    - name: Set git to use LF
+      run: |
+          git config --global core.autocrlf false
+    - uses: actions/checkout@v3
+    - name: Install cygwin base packages with chocolatey
+      run: |
+          choco config get cacheLocation
+          choco install --no-progress cygwin
+      shell: cmd
+    - name: Install cygwin additional packages
+      run: |
+          C:\tools\cygwin\cygwinsetup.exe -qgnNdO -R C:/tools/cygwin -s https://mirrors.kernel.org/sourceware/cygwin/ -P socat,curl,cron,unzip,git,xxd
+      shell: cmd
+    - name: Set ENV
+      shell: cmd
+      run: |
+          echo PATH=C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin;%PATH% >> %GITHUB_ENV%
+    - name: Check ENV
+      shell: cmd
+      run: |
+          echo "PATH=%PATH%"
+    - name: Clone acmetest
+      shell: cmd
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      shell: cmd
+      run: cd ../acmetest && bash.exe -c ./letest.sh
+
+
+

.github/workflows/dockerhub.yml

@@ -6,7 +6,16 @@ on:
       - '*'
     tags:
       - '*'
-    
+    paths:
+      - '**.sh'
+      - "Dockerfile"
+      - '.github/workflows/dockerhub.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
 jobs:
   CheckToken:
     runs-on: ubuntu-latest
@@ -19,9 +28,9 @@ jobs:
         id: step_one
         run: |
           if [ "$DOCKER_PASSWORD" ] ; then
-            echo "::set-output name=hasToken::true"
+            echo "hasToken=true" >>$GITHUB_OUTPUT
           else
-            echo "::set-output name=hasToken::false"
+            echo "hasToken=false" >>$GITHUB_OUTPUT
           fi
       - name: Check the value
         run: echo ${{ steps.step_one.outputs.hasToken }}
@@ -32,13 +41,11 @@ jobs:
     if: "contains(needs.CheckToken.outputs.hasToken, 'true')"
     steps:
       - name: checkout code
-        uses: actions/checkout@v2
-      - name: install buildx
-        id: buildx
-        uses: crazy-max/ghaction-docker-buildx@v3
-        with:
-          buildx-version: latest
-          qemu-version: latest
+        uses: actions/checkout@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
       - name: login to docker hub
         run: |
           echo "${{ secrets.DOCKER_PASSWORD }}" | docker login -u "${{ secrets.DOCKER_USERNAME }}" --password-stdin
@@ -63,4 +70,4 @@ jobs:
             --tag ${DOCKER_IMAGE}:${DOCKER_IMAGE_TAG} \
             --output "type=image,push=true" \
             --build-arg AUTO_UPGRADE=${AUTO_UPGRADE} \
-            --platform linux/arm64/v8,linux/amd64,linux/arm/v6,linux/arm/v7,linux/386 .
+            --platform linux/arm64/v8,linux/amd64,linux/arm/v6,linux/arm/v7,linux/386,linux/ppc64le,linux/s390x .

.github/workflows/issue.yml

@@ -0,0 +1,19 @@
+name: "Update issues"
+on:
+  issues:
+    types: [opened]
+
+jobs:
+  comment:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            github.rest.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: "Please upgrade to the latest code and try again first. Maybe it's already fixed.              ```acme.sh --upgrade```              If it's still not working, please provide the log with `--debug 2`, otherwise, nobody can help you."
+              
+            })

.github/workflows/pr_dns.yml

@@ -0,0 +1,30 @@
+name: Check dns api
+
+on:
+  pull_request_target:
+    types:
+      - opened
+    branches:
+      - 'dev'
+    paths:
+      - 'dnsapi/*.sh'
+
+
+jobs:
+  welcome:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            await github.rest.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: `**Welcome**
+                Please make sure you're read our [DNS API Dev Guide](../wiki/DNS-API-Dev-Guide) and [DNS-API-Test](../wiki/DNS-API-Test).
+                Then reply on this message, otherwise, your code will not be reviewed or merged.
+                We look forward to reviewing your Pull request shortly ✨
+                `
+            })
+

.github/workflows/pr_notify.yml

@@ -0,0 +1,30 @@
+name: Check dns api
+
+on:
+  pull_request_target:
+    types:
+      - opened
+    branches:
+      - 'dev'
+    paths:
+      - 'notify/*.sh'
+
+
+jobs:
+  welcome:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            await github.rest.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: `**Welcome**
+                Please make sure you're read our [Code-of-conduct](../wiki/Code-of-conduct) and  add the usage here: [notify](../wiki/notify).
+                Then reply on this message, otherwise, your code will not be reviewed or merged.
+                We look forward to reviewing your Pull request shortly ✨
+                `
+            })
+

.github/workflows/shellcheck.yml

@@ -5,28 +5,33 @@ on:
       - '*'
     paths:
       - '**.sh'
-      - '**.yml'
+      - '.github/workflows/shellcheck.yml'
   pull_request:
     branches:
       - dev
     paths:
       - '**.sh'
-      - '**.yml'
+      - '.github/workflows/shellcheck.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
 
 jobs:
   ShellCheck:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
     - name: Install Shellcheck
       run: sudo apt-get install -y shellcheck
     - name: DoShellcheck
-      run: shellcheck -V  && shellcheck -e SC2181 **/*.sh && echo "shellcheck OK"
+      run: shellcheck -V  && shellcheck -e SC2181 -e SC2089 **/*.sh && echo "shellcheck OK"
 
   shfmt:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
     - name: Install shfmt
       run: curl -sSL https://github.com/mvdan/sh/releases/download/v3.1.2/shfmt_v3.1.2_linux_amd64 -o ~/shfmt && chmod +x ~/shfmt
     - name: shfmt

Dockerfile

@@ -1,17 +1,19 @@
-FROM alpine:3.12
+FROM alpine:3.17
 
-RUN apk update -f \
-  && apk --no-cache add -f \
+RUN apk --no-cache add -f \
   openssl \
   openssh-client \
   coreutils \
   bind-tools \
   curl \
+  sed \
   socat \
   tzdata \
   oath-toolkit-oathtool \
   tar \
-  && rm -rf /var/cache/apk/*
+  libidn \
+  jq \
+  cronie
 
 ENV LE_CONFIG_HOME /acme.sh
 
@@ -20,11 +22,11 @@ ARG AUTO_UPGRADE=1
 ENV AUTO_UPGRADE $AUTO_UPGRADE
 
 #Install
-ADD ./ /install_acme.sh/
+COPY ./ /install_acme.sh/
 RUN cd /install_acme.sh && ([ -f /install_acme.sh/acme.sh ] && /install_acme.sh/acme.sh --install || curl https://get.acme.sh | sh) && rm -rf /install_acme.sh/
 
 
-RUN ln -s  /root/.acme.sh/acme.sh  /usr/local/bin/acme.sh && crontab -l | grep acme.sh | sed 's#> /dev/null##' | crontab -
+RUN ln -s /root/.acme.sh/acme.sh /usr/local/bin/acme.sh && crontab -l | grep acme.sh | sed 's#> /dev/null#> /proc/1/fd/1 2>/proc/1/fd/2#' | crontab -
 
 RUN for verb in help \
   version \
@@ -40,6 +42,7 @@ RUN for verb in help \
   revoke \
   remove \
   list \
+  info \
   showcsr \
   install-cronjob \
   uninstall-cronjob \
@@ -55,17 +58,17 @@ RUN for verb in help \
   deactivate-account \
   set-notify \
   set-default-ca \
+  set-default-chain \
   ; do \
     printf -- "%b" "#!/usr/bin/env sh\n/root/.acme.sh/acme.sh --${verb} --config-home /acme.sh \"\$@\"" >/usr/local/bin/--${verb} && chmod +x /usr/local/bin/--${verb} \
   ; done
 
 RUN printf "%b" '#!'"/usr/bin/env sh\n \
 if [ \"\$1\" = \"daemon\" ];  then \n \
- trap \"echo stop && killall crond && exit 0\" SIGTERM SIGINT \n \
- crond && while true; do sleep 1; done;\n \
+ exec crond -n -s -m off \n \
 else \n \
  exec -- \"\$@\"\n \
-fi" >/entry.sh && chmod +x /entry.sh
+fi\n" >/entry.sh && chmod +x /entry.sh
 
 VOLUME /acme.sh
 

README.md

@@ -1,6 +1,15 @@
 # An ACME Shell script: acme.sh 
 
-![LetsEncrypt](https://github.com/acmesh-official/acme.sh/workflows/LetsEncrypt/badge.svg)
+[![FreeBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml)
+[![OpenBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml)
+[![NetBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml)
+[![MacOS](https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml)
+[![Ubuntu](https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml)
+[![Windows](https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml)
+[![Solaris](https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml)
+[![DragonFlyBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml)
+
+
 ![Shellcheck](https://github.com/acmesh-official/acme.sh/workflows/Shellcheck/badge.svg)
 ![PebbleStrict](https://github.com/acmesh-official/acme.sh/workflows/PebbleStrict/badge.svg)
 ![DockerHub](https://github.com/acmesh-official/acme.sh/workflows/Build%20DockerHub/badge.svg)
@@ -15,18 +24,18 @@
 
 - An ACME protocol client written purely in Shell (Unix shell) language.
 - Full ACME protocol implementation.
-- Support ACME v1 and ACME v2
-- Support ACME v2 wildcard certs
+- Support ECDSA certs
+- Support SAN and wildcard certs
 - Simple, powerful and very easy to use. You only need 3 minutes to learn it.
 - Bash, dash and sh compatible.
-- Purely written in Shell with no dependencies on python or the official Let's Encrypt client.
+- Purely written in Shell with no dependencies on python.
 - Just one script to issue, renew and install your certificates automatically.
 - DOES NOT require `root/sudoer` access.
-- Docker friendly
-- IPv6 support
+- Docker ready
+- IPv6 ready
 - Cron job notifications for renewal or error etc.
 
-It's probably the `easiest & smartest` shell script to automatically issue & renew the free certificates from Let's Encrypt.
+It's probably the `easiest & smartest` shell script to automatically issue & renew the free certificates.
 
 Wiki: https://github.com/acmesh-official/acme.sh/wiki
 
@@ -42,14 +51,12 @@ Twitter: [@neilpangxa](https://twitter.com/neilpangxa)
 - [ruby-china.org](https://ruby-china.org/topics/31983)
 - [Proxmox](https://pve.proxmox.com/wiki/Certificate_Management)
 - [pfsense](https://github.com/pfsense/FreeBSD-ports/pull/89)
-- [webfaction](https://community.webfaction.com/questions/19988/using-letsencrypt)
 - [Loadbalancer.org](https://www.loadbalancer.org/blog/loadbalancer-org-with-lets-encrypt-quick-and-dirty)
 - [discourse.org](https://meta.discourse.org/t/setting-up-lets-encrypt/40709)
 - [Centminmod](https://centminmod.com/letsencrypt-acmetool-https.html)
 - [splynx](https://forum.splynx.com/t/free-ssl-cert-for-splynx-lets-encrypt/297)
-- [archlinux](https://www.archlinux.org/packages/community/any/acme.sh)
 - [opnsense.org](https://github.com/opnsense/plugins/tree/master/security/acme-client/src/opnsense/scripts/OPNsense/AcmeClient)
-- [CentOS Web Panel](http://centos-webpanel.com/)
+- [CentOS Web Panel](https://control-webpanel.com)
 - [lnmp.org](https://lnmp.org/)
 - [more...](https://github.com/acmesh-official/acme.sh/wiki/Blogs-and-tutorials)
 
@@ -57,38 +64,44 @@ Twitter: [@neilpangxa](https://twitter.com/neilpangxa)
 
 | NO | Status| Platform|
 |----|-------|---------|
-|1|[![MacOS](https://github.com/acmesh-official/acme.sh/workflows/LetsEncrypt/badge.svg)](https://github.com/acmesh-official/acme.sh/actions?query=workflow%3ALetsEncrypt)|Mac OSX
-|2|[![Windows](https://github.com/acmesh-official/acme.sh/workflows/LetsEncrypt/badge.svg)](https://github.com/acmesh-official/acme.sh/actions?query=workflow%3ALetsEncrypt)|Windows (cygwin with curl, openssl and crontab included)
-|3|[![FreeBSD](https://github.com/acmesh-official/acme.sh/workflows/LetsEncrypt/badge.svg)](https://github.com/acmesh-official/acme.sh/actions?query=workflow%3ALetsEncrypt)|FreeBSD
-|4|[![Ubuntu](https://github.com/acmesh-official/acme.sh/workflows/LetsEncrypt/badge.svg)](https://github.com/acmesh-official/acme.sh/actions?query=workflow%3ALetsEncrypt)| Ubuntu
-|5|[![](https://acmesh-official.github.io/acmetest/status/pfsense.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|pfsense
-|6|[![](https://acmesh-official.github.io/acmetest/status/openbsd.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|OpenBSD
-|7|[![](https://acmesh-official.github.io/acmetest/status/solaris.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|SunOS/Solaris
-|8|[![](https://acmesh-official.github.io/acmetest/status/debian-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)| Debian
-|9|[![](https://acmesh-official.github.io/acmetest/status/centos-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|CentOS
-|10|[![](https://acmesh-official.github.io/acmetest/status/opensuse-leap-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|openSUSE
-|11|[![](https://acmesh-official.github.io/acmetest/status/alpine-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|Alpine Linux (with curl)
-|12|[![](https://acmesh-official.github.io/acmetest/status/archlinux-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|Archlinux
-|13|[![](https://acmesh-official.github.io/acmetest/status/fedora-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|fedora
-|14|[![](https://acmesh-official.github.io/acmetest/status/kalilinux-kali.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|Kali Linux
-|15|[![](https://acmesh-official.github.io/acmetest/status/oraclelinux-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|Oracle Linux
-|16|[![](https://acmesh-official.github.io/acmetest/status/proxmox.svg)](https://github.com/acmesh-official/letest#here-are-the-latest-status)| Proxmox: See Proxmox VE Wiki. Version [4.x, 5.0, 5.1](https://pve.proxmox.com/wiki/HTTPS_Certificate_Configuration_(Version_4.x,_5.0_and_5.1)#Let.27s_Encrypt_using_acme.sh), version [5.2 and up](https://pve.proxmox.com/wiki/Certificate_Management)
-|17|-----| Cloud Linux  https://github.com/acmesh-official/acme.sh/issues/111
-|18|[![](https://acmesh-official.github.io/acmetest/status/mageia.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|Mageia
-|19|-----| OpenWRT: Tested and working. See [wiki page](https://github.com/acmesh-official/acme.sh/wiki/How-to-run-on-OpenWRT)
-|20|[![](https://acmesh-official.github.io/acmetest/status/gentoo-stage3-amd64.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|Gentoo Linux
-|21|[![](https://acmesh-official.github.io/acmetest/status/clearlinux-latest.svg)](https://github.com/acmesh-official/acmetest#here-are-the-latest-status)|ClearLinux
-
-For all build statuses, check our [weekly build project](https://github.com/acmesh-official/acmetest):
+|1|[![MacOS](https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml)|Mac OSX
+|2|[![Windows](https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml)|Windows (cygwin with curl, openssl and crontab included)
+|3|[![FreeBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml)|FreeBSD
+|4|[![Solaris](https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml)|Solaris
+|5|[![Ubuntu](https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml)| Ubuntu
+|6|NA|pfsense
+|7|[![OpenBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml)|OpenBSD
+|8|[![NetBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml)|NetBSD
+|9|[![DragonFlyBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml)|DragonFlyBSD
+|10|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)| Debian
+|11|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|CentOS
+|12|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|openSUSE
+|13|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Alpine Linux (with curl)
+|14|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Archlinux
+|15|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|fedora
+|16|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Kali Linux
+|17|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Oracle Linux
+|18|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Mageia
+|19|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Gentoo Linux
+|10|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|ClearLinux
+|11|-----| Cloud Linux  https://github.com/acmesh-official/acme.sh/issues/111
+|22|-----| OpenWRT: Tested and working. See [wiki page](https://github.com/acmesh-official/acme.sh/wiki/How-to-run-on-OpenWRT)
+|23|[![](https://acmesh-official.github.io/acmetest/status/proxmox.svg)](https://github.com/acmesh-official/letest#here-are-the-latest-status)| Proxmox: See Proxmox VE Wiki. Version [4.x, 5.0, 5.1](https://pve.proxmox.com/wiki/HTTPS_Certificate_Configuration_(Version_4.x,_5.0_and_5.1)#Let.27s_Encrypt_using_acme.sh), version [5.2 and up](https://pve.proxmox.com/wiki/Certificate_Management)
+
+
+Check our [testing project](https://github.com/acmesh-official/acmetest):
 
 https://github.com/acmesh-official/acmetest
 
 # Supported CA
 
-- Letsencrypt.org CA(default)
-- [ZeroSSL.com CA](https://github.com/acmesh-official/acme.sh/wiki/ZeroSSL.com-CA)
+- [ZeroSSL.com CA](https://github.com/acmesh-official/acme.sh/wiki/ZeroSSL.com-CA)(default)
+- Letsencrypt.org CA
 - [BuyPass.com CA](https://github.com/acmesh-official/acme.sh/wiki/BuyPass.com-CA)
+- [SSL.com CA](https://github.com/acmesh-official/acme.sh/wiki/SSL.com-CA)
+- [Google.com Public CA](https://github.com/acmesh-official/acme.sh/wiki/Google-Public-CA)
 - [Pebble strict Mode](https://github.com/letsencrypt/pebble)
+- Any other [RFC8555](https://tools.ietf.org/html/rfc8555)-compliant CA
 
 # Supported modes
 
@@ -109,13 +122,13 @@ https://github.com/acmesh-official/acmetest
 Check this project: https://github.com/acmesh-official/get.acme.sh
 
 ```bash
-curl https://get.acme.sh | sh
+curl https://get.acme.sh | sh -s [email protected]
 ```
 
 Or:
 
 ```bash
-wget -O -  https://get.acme.sh | sh
+wget -O -  https://get.acme.sh | sh -s [email protected]
 ```
 
 
@@ -126,7 +139,7 @@ Clone this project and launch installation:
 ```bash
 git clone https://github.com/acmesh-official/acme.sh.git
 cd ./acme.sh
-./acme.sh --install
+./acme.sh --install -m [email protected]
 ```
 
 You `don't have to be root` then, although `it is recommended`.
@@ -346,10 +359,6 @@ Ok, it's done.
 
 # 10. Issue ECC certificates
 
-`Let's Encrypt` can now issue **ECDSA** certificates.
-
-And we support them too!
-
 Just set the `keylength` parameter with a prefix `ec-`.
 
 For example:
@@ -370,10 +379,12 @@ Please look at the `keylength` parameter above.
 
 Valid values are:
 
-1. **ec-256 (prime256v1, "ECDSA P-256")**
+1. **ec-256 (prime256v1, "ECDSA P-256", which is the default key type)**
 2. **ec-384 (secp384r1,  "ECDSA P-384")**
 3. **ec-521 (secp521r1,  "ECDSA P-521", which is not supported by Let's Encrypt yet.)**
-
+4. **2048   (RSA2048)**
+5. **3072   (RSA3072)**
+6. **4096   (RSA4096)**
 
 
 # 11. Issue Wildcard certificates
@@ -468,7 +479,7 @@ TODO:
 
 ### Code Contributors
 
-This project exists thanks to all the people who contribute. [[Contribute](CONTRIBUTING.md)].
+This project exists thanks to all the people who contribute.
 <a href="https://github.com/acmesh-official/acme.sh/graphs/contributors"><img src="https://opencollective.com/acmesh/contributors.svg?width=890&button=false" /></a>
 
 ### Financial Contributors
@@ -494,6 +505,12 @@ Support this project with your organization. Your logo will show up here with a
 <a href="https://opencollective.com/acmesh/organization/8/website"><img src="https://opencollective.com/acmesh/organization/8/avatar.svg"></a>
 <a href="https://opencollective.com/acmesh/organization/9/website"><img src="https://opencollective.com/acmesh/organization/9/avatar.svg"></a>
 
+
+#### Sponsors
+
+[![quantumca-acmesh-logo](https://user-images.githubusercontent.com/8305679/183255712-634ee1db-bb61-4c03-bca0-bacce99e078c.svg)](https://www.quantumca.com.cn/?__utm_source=acmesh-donation)
+
+
 # 19. License & Others
 
 License is GPLv3

deploy/cleverreach.sh

@@ -0,0 +1,92 @@
+#!/usr/bin/env sh
+# Here is the script to deploy the cert to your CleverReach Account using the CleverReach REST API.
+# Your OAuth needs the right scope, please contact CleverReach support for that.
+#
+# Written by Jan-Philipp Benecke <[email protected]>
+# Public domain, 2020
+#
+# Following environment variables must be set:
+#
+#export DEPLOY_CLEVERREACH_CLIENT_ID=myid
+#export DEPLOY_CLEVERREACH_CLIENT_SECRET=mysecret
+
+cleverreach_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _rest_endpoint="https://rest.cleverreach.com"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  _getdeployconf DEPLOY_CLEVERREACH_CLIENT_ID
+  _getdeployconf DEPLOY_CLEVERREACH_CLIENT_SECRET
+  _getdeployconf DEPLOY_CLEVERREACH_SUBCLIENT_ID
+
+  if [ -z "${DEPLOY_CLEVERREACH_CLIENT_ID}" ]; then
+    _err "CleverReach Client ID is not found, please define DEPLOY_CLEVERREACH_CLIENT_ID."
+    return 1
+  fi
+  if [ -z "${DEPLOY_CLEVERREACH_CLIENT_SECRET}" ]; then
+    _err "CleverReach client secret is not found, please define DEPLOY_CLEVERREACH_CLIENT_SECRET."
+    return 1
+  fi
+
+  _savedeployconf DEPLOY_CLEVERREACH_CLIENT_ID "${DEPLOY_CLEVERREACH_CLIENT_ID}"
+  _savedeployconf DEPLOY_CLEVERREACH_CLIENT_SECRET "${DEPLOY_CLEVERREACH_CLIENT_SECRET}"
+  _savedeployconf DEPLOY_CLEVERREACH_SUBCLIENT_ID "${DEPLOY_CLEVERREACH_SUBCLIENT_ID}"
+
+  _info "Obtaining a CleverReach access token"
+
+  _data="{\"grant_type\": \"client_credentials\", \"client_id\": \"${DEPLOY_CLEVERREACH_CLIENT_ID}\", \"client_secret\": \"${DEPLOY_CLEVERREACH_CLIENT_SECRET}\"}"
+  _auth_result="$(_post "$_data" "$_rest_endpoint/oauth/token.php" "" "POST" "application/json")"
+
+  _debug _data "$_data"
+  _debug _auth_result "$_auth_result"
+
+  _regex=".*\"access_token\":\"\([-._0-9A-Za-z]*\)\".*$"
+  _debug _regex "$_regex"
+  _access_token=$(echo "$_auth_result" | _json_decode | sed -n "s/$_regex/\1/p")
+
+  _debug _subclient "${DEPLOY_CLEVERREACH_SUBCLIENT_ID}"
+
+  if [ -n "${DEPLOY_CLEVERREACH_SUBCLIENT_ID}" ]; then
+    _info "Obtaining token for sub-client ${DEPLOY_CLEVERREACH_SUBCLIENT_ID}"
+    export _H1="Authorization: Bearer ${_access_token}"
+    _subclient_token_result="$(_get "$_rest_endpoint/v3/clients/$DEPLOY_CLEVERREACH_SUBCLIENT_ID/token")"
+    _access_token=$(echo "$_subclient_token_result" | sed -n "s/\"//p")
+
+    _debug _subclient_token_result "$_access_token"
+
+    _info "Destroying parent token at CleverReach, as it not needed anymore"
+    _destroy_result="$(_post "" "$_rest_endpoint/v3/oauth/token.json" "" "DELETE" "application/json")"
+    _debug _destroy_result "$_destroy_result"
+  fi
+
+  _info "Uploading certificate and key to CleverReach"
+
+  _certData="{\"cert\":\"$(_json_encode <"$_cfullchain")\", \"key\":\"$(_json_encode <"$_ckey")\"}"
+  export _H1="Authorization: Bearer ${_access_token}"
+  _add_cert_result="$(_post "$_certData" "$_rest_endpoint/v3/ssl" "" "POST" "application/json")"
+
+  if [ -z "${DEPLOY_CLEVERREACH_SUBCLIENT_ID}" ]; then
+    _info "Destroying token at CleverReach, as it not needed anymore"
+    _destroy_result="$(_post "" "$_rest_endpoint/v3/oauth/token.json" "" "DELETE" "application/json")"
+    _debug _destroy_result "$_destroy_result"
+  fi
+
+  if ! echo "$_add_cert_result" | grep '"error":' >/dev/null; then
+    _info "Uploaded certificate successfully"
+    return 0
+  else
+    _debug _add_cert_result "$_add_cert_result"
+    _err "Unable to update certificate"
+    return 1
+  fi
+}

deploy/consul.sh

@@ -0,0 +1,98 @@
+#!/usr/bin/env sh
+
+# Here is a script to deploy cert to hashicorp consul using curl
+# (https://www.consul.io/)
+#
+# it requires following environment variables:
+#
+# CONSUL_PREFIX - this contains the prefix path in consul
+# CONSUL_HTTP_ADDR - consul requires this to find your consul server
+#
+# additionally, you need to ensure that CONSUL_HTTP_TOKEN is available
+# to access the consul server
+
+#returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+consul_deploy() {
+
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  # validate required env vars
+  _getdeployconf CONSUL_PREFIX
+  if [ -z "$CONSUL_PREFIX" ]; then
+    _err "CONSUL_PREFIX needs to be defined (contains prefix path in vault)"
+    return 1
+  fi
+  _savedeployconf CONSUL_PREFIX "$CONSUL_PREFIX"
+
+  _getdeployconf CONSUL_HTTP_ADDR
+  if [ -z "$CONSUL_HTTP_ADDR" ]; then
+    _err "CONSUL_HTTP_ADDR needs to be defined (contains consul connection address)"
+    return 1
+  fi
+  _savedeployconf CONSUL_HTTP_ADDR "$CONSUL_HTTP_ADDR"
+
+  CONSUL_CMD=$(command -v consul)
+
+  # force CLI, but the binary does not exist => error
+  if [ -n "$USE_CLI" ] && [ -z "$CONSUL_CMD" ]; then
+    _err "Cannot find the consul binary!"
+    return 1
+  fi
+
+  # use the CLI first
+  if [ -n "$USE_CLI" ] || [ -n "$CONSUL_CMD" ]; then
+    _info "Found consul binary, deploying with CLI"
+    consul_deploy_cli "$CONSUL_CMD" "$CONSUL_PREFIX"
+  else
+    _info "Did not find consul binary, deploying with API"
+    consul_deploy_api "$CONSUL_HTTP_ADDR" "$CONSUL_PREFIX" "$CONSUL_HTTP_TOKEN"
+  fi
+}
+
+consul_deploy_api() {
+  CONSUL_HTTP_ADDR="$1"
+  CONSUL_PREFIX="$2"
+  CONSUL_HTTP_TOKEN="$3"
+
+  URL="$CONSUL_HTTP_ADDR/v1/kv/$CONSUL_PREFIX"
+  export _H1="X-Consul-Token: $CONSUL_HTTP_TOKEN"
+
+  if [ -n "$FABIO" ]; then
+    _post "$(cat "$_cfullchain")" "$URL/${_cdomain}-cert.pem" '' "PUT" || return 1
+    _post "$(cat "$_ckey")" "$URL/${_cdomain}-key.pem" '' "PUT" || return 1
+  else
+    _post "$(cat "$_ccert")" "$URL/${_cdomain}/cert.pem" '' "PUT" || return 1
+    _post "$(cat "$_ckey")" "$URL/${_cdomain}/cert.key" '' "PUT" || return 1
+    _post "$(cat "$_cca")" "$URL/${_cdomain}/chain.pem" '' "PUT" || return 1
+    _post "$(cat "$_cfullchain")" "$URL/${_cdomain}/fullchain.pem" '' "PUT" || return 1
+  fi
+}
+
+consul_deploy_cli() {
+  CONSUL_CMD="$1"
+  CONSUL_PREFIX="$2"
+
+  if [ -n "$FABIO" ]; then
+    $CONSUL_CMD kv put "${CONSUL_PREFIX}/${_cdomain}-cert.pem" @"$_cfullchain" || return 1
+    $CONSUL_CMD kv put "${CONSUL_PREFIX}/${_cdomain}-key.pem" @"$_ckey" || return 1
+  else
+    $CONSUL_CMD kv put "${CONSUL_PREFIX}/${_cdomain}/cert.pem" value=@"$_ccert" || return 1
+    $CONSUL_CMD kv put "${CONSUL_PREFIX}/${_cdomain}/cert.key" value=@"$_ckey" || return 1
+    $CONSUL_CMD kv put "${CONSUL_PREFIX}/${_cdomain}/chain.pem" value=@"$_cca" || return 1
+    $CONSUL_CMD kv put "${CONSUL_PREFIX}/${_cdomain}/fullchain.pem" value=@"$_cfullchain" || return 1
+  fi
+}

deploy/cpanel_uapi.sh

@@ -3,18 +3,29 @@
 # Uses command line uapi.  --user option is needed only if run as root.
 # Returns 0 when success.
 #
+# Configure DEPLOY_CPANEL_AUTO_<...> options to enable or restrict automatic
+# detection of deployment targets through UAPI (if not set, defaults below are used.)
+# - ENABLED : 'true' for multi-site / wildcard capability; otherwise single-site mode.
+# - NOMATCH : 'true' to allow deployment to sites that do not match the certificate.
+# - INCLUDE : Comma-separated list - sites must match this field.
+# - EXCLUDE : Comma-separated list - sites must NOT match this field.
+# INCLUDE/EXCLUDE both support non-lexical, glob-style matches using '*'
+#
 # Please note that I am no longer using Github. If you want to report an issue
 # or contact me, visit https://forum.webseodesigners.com/web-design-seo-and-hosting-f16/
 #
 # Written by Santeri Kannisto <[email protected]>
 # Public domain, 2017-2018
-
-#export DEPLOY_CPANEL_USER=myusername
+#
+# export DEPLOY_CPANEL_USER=myusername
+# export DEPLOY_CPANEL_AUTO_ENABLED='true'
+# export DEPLOY_CPANEL_AUTO_NOMATCH='false'
+# export DEPLOY_CPANEL_AUTO_INCLUDE='*'
+# export DEPLOY_CPANEL_AUTO_EXCLUDE=''
 
 ########  Public functions #####################
 
 #domain keyfile certfile cafile fullchain
-
 cpanel_uapi_deploy() {
   _cdomain="$1"
   _ckey="$2"
@@ -22,6 +33,9 @@ cpanel_uapi_deploy() {
   _cca="$4"
   _cfullchain="$5"
 
+  # re-declare vars inherited from acme.sh but not passed to make ShellCheck happy
+  : "${Le_Alt:=""}"
+
   _debug _cdomain "$_cdomain"
   _debug _ckey "$_ckey"
   _debug _ccert "$_ccert"
@@ -32,31 +46,166 @@ cpanel_uapi_deploy() {
     _err "The command uapi is not found."
     return 1
   fi
+
+  # declare useful constants
+  uapi_error_response='status: 0'
+
   # read cert and key files and urlencode both
   _cert=$(_url_encode <"$_ccert")
   _key=$(_url_encode <"$_ckey")
 
-  _debug _cert "$_cert"
-  _debug _key "$_key"
+  _debug2 _cert "$_cert"
+  _debug2 _key "$_key"
 
   if [ "$(id -u)" = 0 ]; then
-    if [ -z "$DEPLOY_CPANEL_USER" ]; then
+    _getdeployconf DEPLOY_CPANEL_USER
+    # fallback to _readdomainconf for old installs
+    if [ -z "${DEPLOY_CPANEL_USER:=$(_readdomainconf DEPLOY_CPANEL_USER)}" ]; then
       _err "It seems that you are root, please define the target user name: export DEPLOY_CPANEL_USER=username"
       return 1
     fi
-    _savedomainconf DEPLOY_CPANEL_USER "$DEPLOY_CPANEL_USER"
-    _response=$(uapi --user="$DEPLOY_CPANEL_USER" SSL install_ssl domain="$_cdomain" cert="$_cert" key="$_key")
-  else
-    _response=$(uapi SSL install_ssl domain="$_cdomain" cert="$_cert" key="$_key")
+    _debug DEPLOY_CPANEL_USER "$DEPLOY_CPANEL_USER"
+    _savedeployconf DEPLOY_CPANEL_USER "$DEPLOY_CPANEL_USER"
+
+    _uapi_user="$DEPLOY_CPANEL_USER"
   fi
-  error_response="status: 0"
-  if test "${_response#*$error_response}" != "$_response"; then
-    _err "Error in deploying certificate:"
-    _err "$_response"
-    return 1
+
+  # Load all AUTO envars and set defaults - see above for usage
+  __cpanel_initautoparam ENABLED 'true'
+  __cpanel_initautoparam NOMATCH 'false'
+  __cpanel_initautoparam INCLUDE '*'
+  __cpanel_initautoparam EXCLUDE ''
+
+  # Auto mode
+  if [ "$DEPLOY_CPANEL_AUTO_ENABLED" = "true" ]; then
+    # call API for site config
+    _response=$(uapi DomainInfo list_domains)
+    # exit if error in response
+    if [ -z "$_response" ] || [ "${_response#*"$uapi_error_response"}" != "$_response" ]; then
+      _err "Error in deploying certificate - cannot retrieve sitelist:"
+      _err "\n$_response"
+      return 1
+    fi
+
+    # parse response to create site list
+    sitelist=$(__cpanel_parse_response "$_response")
+    _debug "UAPI sites found: $sitelist"
+
+    # filter sitelist using configured domains
+    # skip if NOMATCH is "true"
+    if [ "$DEPLOY_CPANEL_AUTO_NOMATCH" = "true" ]; then
+      _debug "DEPLOY_CPANEL_AUTO_NOMATCH is true"
+      _info "UAPI nomatch mode is enabled - Will not validate sites are valid for the certificate"
+    else
+      _debug "DEPLOY_CPANEL_AUTO_NOMATCH is false"
+      d="$(echo "${Le_Alt}," | sed -e "s/^$_cdomain,//" -e "s/,$_cdomain,/,/")"
+      d="$(echo "$_cdomain,$d" | tr ',' '\n' | sed -e 's/\./\\./g' -e 's/\*/\[\^\.\]\*/g')"
+      sitelist="$(echo "$sitelist" | grep -ix "$d")"
+      _debug2 "Matched UAPI sites: $sitelist"
+    fi
+
+    # filter sites that do not match $DEPLOY_CPANEL_AUTO_INCLUDE
+    _info "Applying sitelist filter DEPLOY_CPANEL_AUTO_INCLUDE: $DEPLOY_CPANEL_AUTO_INCLUDE"
+    sitelist="$(echo "$sitelist" | grep -ix "$(echo "$DEPLOY_CPANEL_AUTO_INCLUDE" | tr ',' '\n' | sed -e 's/\./\\./g' -e 's/\*/\.\*/g')")"
+    _debug2 "Remaining sites: $sitelist"
+
+    # filter sites that match $DEPLOY_CPANEL_AUTO_EXCLUDE
+    _info "Applying sitelist filter DEPLOY_CPANEL_AUTO_EXCLUDE: $DEPLOY_CPANEL_AUTO_EXCLUDE"
+    sitelist="$(echo "$sitelist" | grep -vix "$(echo "$DEPLOY_CPANEL_AUTO_EXCLUDE" | tr ',' '\n' | sed -e 's/\./\\./g' -e 's/\*/\.\*/g')")"
+    _debug2 "Remaining sites: $sitelist"
+
+    # counter for success / failure check
+    successes=0
+    if [ -n "$sitelist" ]; then
+      sitetotal="$(echo "$sitelist" | wc -l)"
+      _debug "$sitetotal sites to deploy"
+    else
+      sitetotal=0
+      _debug "No sites to deploy"
+    fi
+
+    # for each site: call uapi to publish cert and log result. Only return failure if all fail
+    for site in $sitelist; do
+      # call uapi to publish cert, check response for errors and log them.
+      if [ -n "$_uapi_user" ]; then
+        _response=$(uapi --user="$_uapi_user" SSL install_ssl domain="$site" cert="$_cert" key="$_key")
+      else
+        _response=$(uapi SSL install_ssl domain="$site" cert="$_cert" key="$_key")
+      fi
+      if [ "${_response#*"$uapi_error_response"}" != "$_response" ]; then
+        _err "Error in deploying certificate to $site:"
+        _err "$_response"
+      else
+        successes=$((successes + 1))
+        _debug "$_response"
+        _info "Succcessfully deployed to $site"
+      fi
+    done
+
+    # Raise error if all updates fail
+    if [ "$sitetotal" -gt 0 ] && [ "$successes" -eq 0 ]; then
+      _err "Could not deploy to any of $sitetotal sites via UAPI"
+      _debug "successes: $successes, sitetotal: $sitetotal"
+      return 1
+    fi
+
+    _info "Successfully deployed certificate to $successes of $sitetotal sites via UAPI"
+    return 0
+  else
+    # "classic" mode - will only try to deploy to the primary domain; will not check UAPI first
+    if [ -n "$_uapi_user" ]; then
+      _response=$(uapi --user="$_uapi_user" SSL install_ssl domain="$_cdomain" cert="$_cert" key="$_key")
+    else
+      _response=$(uapi SSL install_ssl domain="$_cdomain" cert="$_cert" key="$_key")
+    fi
+
+    if [ "${_response#*"$uapi_error_response"}" != "$_response" ]; then
+      _err "Error in deploying certificate:"
+      _err "$_response"
+      return 1
+    fi
+
+    _debug response "$_response"
+    _info "Certificate successfully deployed"
+    return 0
   fi
+}
+
+########  Private functions #####################
+
+# Internal utility to process YML from UAPI - looks at main_domain, sub_domains, addon domains and parked domains
+#[response]
+__cpanel_parse_response() {
+  if [ $# -gt 0 ]; then resp="$*"; else resp="$(cat)"; fi
+
+  echo "$resp" |
+    sed -En \
+      -e 's/\r$//' \
+      -e 's/^( *)([_.[:alnum:]]+) *: *(.*)/\1,\2,\3/p' \
+      -e 's/^( *)- (.*)/\1,-,\2/p' |
+    awk -F, '{
+      level = length($1)/2;
+      section[level] = $2;
+      for (i in section) {if (i > level) {delete section[i]}}
+      if (length($3) > 0) {
+        prefix="";
+        for (i=0; i < level; i++)
+          { prefix = (prefix)(section[i])("/") }
+        printf("%s%s=%s\n", prefix, $2, $3);
+      }
+    }' |
+    sed -En -e 's/^result\/data\/(main_domain|sub_domains\/-|addon_domains\/-|parked_domains\/-)=(.*)$/\2/p'
+}
+
+# Load parameter by prefix+name - fallback to default if not set, and save to config
+#pname pdefault
+__cpanel_initautoparam() {
+  pname="$1"
+  pdefault="$2"
+  pkey="DEPLOY_CPANEL_AUTO_$pname"
 
-  _debug response "$_response"
-  _info "Certificate successfully deployed"
-  return 0
+  _getdeployconf "$pkey"
+  [ -n "$(eval echo "\"\$$pkey\"")" ] || eval "$pkey=\"$pdefault\""
+  _debug2 "$pkey" "$(eval echo "\"\$$pkey\"")"
+  _savedeployconf "$pkey" "$(eval echo "\"\$$pkey\"")"
 }

deploy/docker.sh

@@ -273,15 +273,27 @@ _check_curl_version() {
   _minor="$(_getfield "$_cversion" 2 '.')"
   _debug2 "_minor" "$_minor"
 
-  if [ "$_major$_minor" -lt "740" ]; then
-    _err "curl v$_cversion doesn't support unit socket"
-    return 1
+  if [ "$_major" -ge "8" ]; then
+    #ok
+    return 0
   fi
-  if [ "$_major$_minor" -lt "750" ]; then
-    _debug "Use short host name"
-    export _CURL_NO_HOST=1
+  if [ "$_major" = "7" ]; then
+    if [ "$_minor" -lt "40" ]; then
+      _err "curl v$_cversion doesn't support unit socket"
+      _err "Please upgrade to curl 7.40 or later."
+      return 1
+    fi
+    if [ "$_minor" -lt "50" ]; then
+      _debug "Use short host name"
+      export _CURL_NO_HOST=1
+    else
+      export _CURL_NO_HOST=
+    fi
+    return 0
   else
-    export _CURL_NO_HOST=
+    _err "curl v$_cversion doesn't support unit socket"
+    _err "Please upgrade to curl 7.40 or later."
+    return 1
   fi
-  return 0
+
 }

deploy/fritzbox.sh

@@ -28,47 +28,59 @@ fritzbox_deploy() {
   _debug _cfullchain "$_cfullchain"
 
   if ! _exists iconv; then
-    if ! _exists perl; then
-      _err "iconv or perl not found"
-      return 1
+    if ! _exists uconv; then
+      if ! _exists perl; then
+        _err "iconv or uconv or perl not found"
+        return 1
+      fi
     fi
   fi
 
-  _fritzbox_username="${DEPLOY_FRITZBOX_USERNAME}"
-  _fritzbox_password="${DEPLOY_FRITZBOX_PASSWORD}"
-  _fritzbox_url="${DEPLOY_FRITZBOX_URL}"
+  # Clear traces of incorrectly stored values
+  _clearaccountconf DEPLOY_FRITZBOX_USERNAME
+  _clearaccountconf DEPLOY_FRITZBOX_PASSWORD
+  _clearaccountconf DEPLOY_FRITZBOX_URL
 
-  _debug _fritzbox_url "$_fritzbox_url"
-  _debug _fritzbox_username "$_fritzbox_username"
-  _secure_debug _fritzbox_password "$_fritzbox_password"
-  if [ -z "$_fritzbox_username" ]; then
+  # Read config from saved values or env
+  _getdeployconf DEPLOY_FRITZBOX_USERNAME
+  _getdeployconf DEPLOY_FRITZBOX_PASSWORD
+  _getdeployconf DEPLOY_FRITZBOX_URL
+
+  _debug DEPLOY_FRITZBOX_URL "$DEPLOY_FRITZBOX_URL"
+  _debug DEPLOY_FRITZBOX_USERNAME "$DEPLOY_FRITZBOX_USERNAME"
+  _secure_debug DEPLOY_FRITZBOX_PASSWORD "$DEPLOY_FRITZBOX_PASSWORD"
+
+  if [ -z "$DEPLOY_FRITZBOX_USERNAME" ]; then
     _err "FRITZ!Box username is not found, please define DEPLOY_FRITZBOX_USERNAME."
     return 1
   fi
-  if [ -z "$_fritzbox_password" ]; then
+  if [ -z "$DEPLOY_FRITZBOX_PASSWORD" ]; then
     _err "FRITZ!Box password is not found, please define DEPLOY_FRITZBOX_PASSWORD."
     return 1
   fi
-  if [ -z "$_fritzbox_url" ]; then
+  if [ -z "$DEPLOY_FRITZBOX_URL" ]; then
     _err "FRITZ!Box url is not found, please define DEPLOY_FRITZBOX_URL."
     return 1
   fi
 
-  _saveaccountconf DEPLOY_FRITZBOX_USERNAME "${_fritzbox_username}"
-  _saveaccountconf DEPLOY_FRITZBOX_PASSWORD "${_fritzbox_password}"
-  _saveaccountconf DEPLOY_FRITZBOX_URL "${_fritzbox_url}"
+  # Save current values
+  _savedeployconf DEPLOY_FRITZBOX_USERNAME "$DEPLOY_FRITZBOX_USERNAME"
+  _savedeployconf DEPLOY_FRITZBOX_PASSWORD "$DEPLOY_FRITZBOX_PASSWORD"
+  _savedeployconf DEPLOY_FRITZBOX_URL "$DEPLOY_FRITZBOX_URL"
 
   # Do not check for a valid SSL certificate, because initially the cert is not valid, so it could not install the LE generated certificate
   export HTTPS_INSECURE=1
 
   _info "Log in to the FRITZ!Box"
-  _fritzbox_challenge="$(_get "${_fritzbox_url}/login_sid.lua" | sed -e 's/^.*<Challenge>//' -e 's/<\/Challenge>.*$//')"
+  _fritzbox_challenge="$(_get "${DEPLOY_FRITZBOX_URL}/login_sid.lua" | sed -e 's/^.*<Challenge>//' -e 's/<\/Challenge>.*$//')"
   if _exists iconv; then
-    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${_fritzbox_password}" | iconv -f ASCII -t UTF16LE | md5sum | awk '{print $1}')"
+    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | iconv -f ASCII -t UTF16LE | _digest md5 hex)"
+  elif _exists uconv; then
+    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | uconv -f ASCII -t UTF16LE | _digest md5 hex)"
   else
-    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${_fritzbox_password}" | perl -p -e 'use Encode qw/encode/; print encode("UTF-16LE","$_"); $_="";' | md5sum | awk '{print $1}')"
+    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | perl -p -e 'use Encode qw/encode/; print encode("UTF-16LE","$_"); $_="";' | _digest md5 hex)"
   fi
-  _fritzbox_sid="$(_get "${_fritzbox_url}/login_sid.lua?sid=0000000000000000&username=${_fritzbox_username}&response=${_fritzbox_challenge}-${_fritzbox_hash}" | sed -e 's/^.*<SID>//' -e 's/<\/SID>.*$//')"
+  _fritzbox_sid="$(_get "${DEPLOY_FRITZBOX_URL}/login_sid.lua?sid=0000000000000000&username=${DEPLOY_FRITZBOX_USERNAME}&response=${_fritzbox_challenge}-${_fritzbox_hash}" | sed -e 's/^.*<SID>//' -e 's/<\/SID>.*$//')"
 
   if [ -z "${_fritzbox_sid}" ] || [ "${_fritzbox_sid}" = "0000000000000000" ]; then
     _err "Logging in to the FRITZ!Box failed. Please check username, password and URL."
@@ -100,7 +112,7 @@ fritzbox_deploy() {
   _info "Upload certificate to the FRITZ!Box"
 
   export _H1="Content-type: multipart/form-data boundary=${_post_boundary}"
-  _post "$(cat "${_post_request}")" "${_fritzbox_url}/cgi-bin/firmwarecfg" | grep SSL
+  _post "$(cat "${_post_request}")" "${DEPLOY_FRITZBOX_URL}/cgi-bin/firmwarecfg" | grep SSL
 
   retval=$?
   if [ $retval = 0 ]; then

deploy/gcore_cdn.sh

@@ -1,10 +1,11 @@
 #!/usr/bin/env sh
 
-# Here is the script to deploy the cert to G-Core CDN service (https://gcorelabs.com/ru/) using the G-Core Labs API (https://docs.gcorelabs.com/cdn/).
+# Here is the script to deploy the cert to G-Core CDN service (https://gcore.com/) using the G-Core Labs API (https://apidocs.gcore.com/cdn).
 # Returns 0 when success.
 #
 # Written by temoffey <[email protected]>
 # Public domain, 2019
+# Update by DreamOfIce <[email protected]> in 2023
 
 #export DEPLOY_GCORE_CDN_USERNAME=myusername
 #export DEPLOY_GCORE_CDN_PASSWORD=mypassword
@@ -56,9 +57,9 @@ gcore_cdn_deploy() {
   _request="{\"username\":\"$Le_Deploy_gcore_cdn_username\",\"password\":\"$Le_Deploy_gcore_cdn_password\"}"
   _debug _request "$_request"
   export _H1="Content-Type:application/json"
-  _response=$(_post "$_request" "https://api.gcdn.co/auth/signin")
+  _response=$(_post "$_request" "https://api.gcore.com/auth/jwt/login")
   _debug _response "$_response"
-  _regex=".*\"token\":\"\([-._0-9A-Za-z]*\)\".*$"
+  _regex=".*\"access\":\"\([-._0-9A-Za-z]*\)\".*$"
   _debug _regex "$_regex"
   _token=$(echo "$_response" | sed -n "s/$_regex/\1/p")
   _debug _token "$_token"
@@ -69,15 +70,18 @@ gcore_cdn_deploy() {
   fi
 
   _info "Find CDN resource with cname $_cdomain"
-  export _H2="Authorization:Token $_token"
-  _response=$(_get "https://api.gcdn.co/resources")
+  export _H2="Authorization:Bearer $_token"
+  _response=$(_get "https://api.gcore.com/cdn/resources")
+  _debug _response "$_response"
+  _regex="\"primary_resource\":null},"
+  _debug _regex "$_regex"
+  _response=$(echo "$_response" | sed "s/$_regex/$_regex\n/g")
   _debug _response "$_response"
-  _regex=".*(\"id\".*?\"cname\":\"$_cdomain\".*?})"
   _regex="^.*\"cname\":\"$_cdomain\".*$"
   _debug _regex "$_regex"
-  _resource=$(echo "$_response" | sed 's/},{/},\n{/g' | _egrep_o "$_regex")
+  _resource=$(echo "$_response" | _egrep_o "$_regex")
   _debug _resource "$_resource"
-  _regex=".*\"id\":\([0-9]*\).*\"rules\".*$"
+  _regex=".*\"id\":\([0-9]*\).*$"
   _debug _regex "$_regex"
   _resourceId=$(echo "$_resource" | sed -n "s/$_regex/\1/p")
   _debug _resourceId "$_resourceId"
@@ -99,7 +103,7 @@ gcore_cdn_deploy() {
   _date=$(date "+%d.%m.%Y %H:%M:%S")
   _request="{\"name\":\"$_cdomain ($_date)\",\"sslCertificate\":\"$_fullchain\",\"sslPrivateKey\":\"$_key\"}"
   _debug _request "$_request"
-  _response=$(_post "$_request" "https://api.gcdn.co/sslData")
+  _response=$(_post "$_request" "https://api.gcore.com/cdn/sslData")
   _debug _response "$_response"
   _regex=".*\"id\":\([0-9]*\).*$"
   _debug _regex "$_regex"
@@ -114,7 +118,7 @@ gcore_cdn_deploy() {
   _info "Update CDN resource"
   _request="{\"originGroup\":$_originGroup,\"sslData\":$_sslDataAdd}"
   _debug _request "$_request"
-  _response=$(_post "$_request" "https://api.gcdn.co/resources/$_resourceId" '' "PUT")
+  _response=$(_post "$_request" "https://api.gcore.com/cdn/resources/$_resourceId" '' "PUT")
   _debug _response "$_response"
   _regex=".*\"sslData\":\([0-9]*\).*$"
   _debug _regex "$_regex"
@@ -130,7 +134,7 @@ gcore_cdn_deploy() {
     _info "Not found old SSL certificate"
   else
     _info "Delete old SSL certificate"
-    _response=$(_post '' "https://api.gcdn.co/sslData/$_sslDataOld" '' "DELETE")
+    _response=$(_post '' "https://api.gcore.com/cdn/sslData/$_sslDataOld" '' "DELETE")
     _debug _response "$_response"
   fi
 

deploy/gitlab.sh

@@ -67,7 +67,7 @@ gitlab_deploy() {
 
   error_response="error"
 
-  if test "${_response#*$error_response}" != "$_response"; then
+  if test "${_response#*"$error_response"}" != "$_response"; then
     _err "Error in deploying certificate:"
     _err "$_response"
     return 1

deploy/haproxy.sh

@@ -54,11 +54,6 @@ haproxy_deploy() {
   DEPLOY_HAPROXY_ISSUER_DEFAULT="no"
   DEPLOY_HAPROXY_RELOAD_DEFAULT="true"
 
-  if [ -f "${DOMAIN_CONF}" ]; then
-    # shellcheck disable=SC1090
-    . "${DOMAIN_CONF}"
-  fi
-
   _debug _cdomain "${_cdomain}"
   _debug _ckey "${_ckey}"
   _debug _ccert "${_ccert}"
@@ -66,6 +61,8 @@ haproxy_deploy() {
   _debug _cfullchain "${_cfullchain}"
 
   # PEM_PATH is optional. If not provided then assume "${DEPLOY_HAPROXY_PEM_PATH_DEFAULT}"
+  _getdeployconf DEPLOY_HAPROXY_PEM_PATH
+  _debug2 DEPLOY_HAPROXY_PEM_PATH "${DEPLOY_HAPROXY_PEM_PATH}"
   if [ -n "${DEPLOY_HAPROXY_PEM_PATH}" ]; then
     Le_Deploy_haproxy_pem_path="${DEPLOY_HAPROXY_PEM_PATH}"
     _savedomainconf Le_Deploy_haproxy_pem_path "${Le_Deploy_haproxy_pem_path}"
@@ -82,6 +79,8 @@ haproxy_deploy() {
   fi
 
   # PEM_NAME is optional. If not provided then assume "${DEPLOY_HAPROXY_PEM_NAME_DEFAULT}"
+  _getdeployconf DEPLOY_HAPROXY_PEM_NAME
+  _debug2 DEPLOY_HAPROXY_PEM_NAME "${DEPLOY_HAPROXY_PEM_NAME}"
   if [ -n "${DEPLOY_HAPROXY_PEM_NAME}" ]; then
     Le_Deploy_haproxy_pem_name="${DEPLOY_HAPROXY_PEM_NAME}"
     _savedomainconf Le_Deploy_haproxy_pem_name "${Le_Deploy_haproxy_pem_name}"
@@ -90,6 +89,8 @@ haproxy_deploy() {
   fi
 
   # BUNDLE is optional. If not provided then assume "${DEPLOY_HAPROXY_BUNDLE_DEFAULT}"
+  _getdeployconf DEPLOY_HAPROXY_BUNDLE
+  _debug2 DEPLOY_HAPROXY_BUNDLE "${DEPLOY_HAPROXY_BUNDLE}"
   if [ -n "${DEPLOY_HAPROXY_BUNDLE}" ]; then
     Le_Deploy_haproxy_bundle="${DEPLOY_HAPROXY_BUNDLE}"
     _savedomainconf Le_Deploy_haproxy_bundle "${Le_Deploy_haproxy_bundle}"
@@ -98,6 +99,8 @@ haproxy_deploy() {
   fi
 
   # ISSUER is optional. If not provided then assume "${DEPLOY_HAPROXY_ISSUER_DEFAULT}"
+  _getdeployconf DEPLOY_HAPROXY_ISSUER
+  _debug2 DEPLOY_HAPROXY_ISSUER "${DEPLOY_HAPROXY_ISSUER}"
   if [ -n "${DEPLOY_HAPROXY_ISSUER}" ]; then
     Le_Deploy_haproxy_issuer="${DEPLOY_HAPROXY_ISSUER}"
     _savedomainconf Le_Deploy_haproxy_issuer "${Le_Deploy_haproxy_issuer}"
@@ -106,6 +109,8 @@ haproxy_deploy() {
   fi
 
   # RELOAD is optional. If not provided then assume "${DEPLOY_HAPROXY_RELOAD_DEFAULT}"
+  _getdeployconf DEPLOY_HAPROXY_RELOAD
+  _debug2 DEPLOY_HAPROXY_RELOAD "${DEPLOY_HAPROXY_RELOAD}"
   if [ -n "${DEPLOY_HAPROXY_RELOAD}" ]; then
     Le_Deploy_haproxy_reload="${DEPLOY_HAPROXY_RELOAD}"
     _savedomainconf Le_Deploy_haproxy_reload "${Le_Deploy_haproxy_reload}"
@@ -190,7 +195,7 @@ haproxy_deploy() {
     _info "Updating OCSP stapling info"
     _debug _ocsp "${_ocsp}"
     _info "Extracting OCSP URL"
-    _ocsp_url=$(openssl x509 -noout -ocsp_uri -in "${_pem}")
+    _ocsp_url=$(${ACME_OPENSSL_BIN:-openssl} x509 -noout -ocsp_uri -in "${_pem}")
     _debug _ocsp_url "${_ocsp_url}"
 
     # Only process OCSP if URL was present
@@ -203,9 +208,9 @@ haproxy_deploy() {
       # Only process the certificate if we have a .issuer file
       if [ -r "${_issuer}" ]; then
         # Check if issuer cert is also a root CA cert
-        _subjectdn=$(openssl x509 -in "${_issuer}" -subject -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
+        _subjectdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -subject -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
         _debug _subjectdn "${_subjectdn}"
-        _issuerdn=$(openssl x509 -in "${_issuer}" -issuer -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
+        _issuerdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -issuer -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
         _debug _issuerdn "${_issuerdn}"
         _info "Requesting OCSP response"
         # If the issuer is a CA cert then our command line has "-CAfile" added
@@ -216,7 +221,7 @@ haproxy_deploy() {
         fi
         _debug _cafile_argument "${_cafile_argument}"
         # if OpenSSL/LibreSSL is v1.1 or above, the format for the -header option has changed
-        _openssl_version=$(openssl version | cut -d' ' -f2)
+        _openssl_version=$(${ACME_OPENSSL_BIN:-openssl} version | cut -d' ' -f2)
         _debug _openssl_version "${_openssl_version}"
         _openssl_major=$(echo "${_openssl_version}" | cut -d '.' -f1)
         _openssl_minor=$(echo "${_openssl_version}" | cut -d '.' -f2)
@@ -226,7 +231,7 @@ haproxy_deploy() {
           _header_sep=" "
         fi
         # Request the OCSP response from the issuer and store it
-        _openssl_ocsp_cmd="openssl ocsp \
+        _openssl_ocsp_cmd="${ACME_OPENSSL_BIN:-openssl} ocsp \
           -issuer \"${_issuer}\" \
           -cert \"${_pem}\" \
           -url \"${_ocsp_url}\" \

deploy/kong.sh

@@ -45,7 +45,7 @@ kong_deploy() {
   #Generate data for request (Multipart/form-data with mixed content)
   if [ -z "$ssl_uuid" ]; then
     #set sni to domain
-    content="--$delim${nl}Content-Disposition: form-data; name=\"snis\"${nl}${nl}$_cdomain"
+    content="--$delim${nl}Content-Disposition: form-data; name=\"snis[]\"${nl}${nl}$_cdomain"
   fi
   #add key
   content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"key\"; filename=\"$(basename "$_ckey")\"${nl}Content-Type: application/octet-stream${nl}${nl}$(cat "$_ckey")"

deploy/lighttpd.sh

@@ -0,0 +1,280 @@
+#!/usr/bin/env sh
+
+# Script for acme.sh to deploy certificates to lighttpd
+#
+# The following variables can be exported:
+#
+# export DEPLOY_LIGHTTPD_PEM_NAME="${domain}.pem"
+#
+# Defines the name of the PEM file.
+# Defaults to "<domain>.pem"
+#
+# export DEPLOY_LIGHTTPD_PEM_PATH="/etc/lighttpd"
+#
+# Defines location of PEM file for Lighttpd.
+# Defaults to /etc/lighttpd
+#
+# export DEPLOY_LIGHTTPD_RELOAD="systemctl reload lighttpd"
+#
+# OPTIONAL: Reload command used post deploy
+# This defaults to be a no-op (ie "true").
+# It is strongly recommended to set this something that makes sense
+# for your distro.
+#
+# export DEPLOY_LIGHTTPD_ISSUER="yes"
+#
+# OPTIONAL: Places CA file as "${DEPLOY_LIGHTTPD_PEM}.issuer"
+# Note: Required for OCSP stapling to work
+#
+# export DEPLOY_LIGHTTPD_BUNDLE="no"
+#
+# OPTIONAL: Deploy this certificate as part of a multi-cert bundle
+# This adds a suffix to the certificate based on the certificate type
+# eg RSA certificates will have .rsa as a suffix to the file name
+# Lighttpd will load all certificates and provide one or the other
+# depending on client capabilities
+# Note: This functionality requires Lighttpd was compiled against
+# a version of OpenSSL that supports this.
+#
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+lighttpd_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  # Some defaults
+  DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT="/etc/lighttpd"
+  DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT="${_cdomain}.pem"
+  DEPLOY_LIGHTTPD_BUNDLE_DEFAULT="no"
+  DEPLOY_LIGHTTPD_ISSUER_DEFAULT="yes"
+  DEPLOY_LIGHTTPD_RELOAD_DEFAULT="true"
+
+  _debug _cdomain "${_cdomain}"
+  _debug _ckey "${_ckey}"
+  _debug _ccert "${_ccert}"
+  _debug _cca "${_cca}"
+  _debug _cfullchain "${_cfullchain}"
+
+  # PEM_PATH is optional. If not provided then assume "${DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT}"
+  _getdeployconf DEPLOY_LIGHTTPD_PEM_PATH
+  _debug2 DEPLOY_LIGHTTPD_PEM_PATH "${DEPLOY_LIGHTTPD_PEM_PATH}"
+  if [ -n "${DEPLOY_LIGHTTPD_PEM_PATH}" ]; then
+    Le_Deploy_lighttpd_pem_path="${DEPLOY_LIGHTTPD_PEM_PATH}"
+    _savedomainconf Le_Deploy_lighttpd_pem_path "${Le_Deploy_lighttpd_pem_path}"
+  elif [ -z "${Le_Deploy_lighttpd_pem_path}" ]; then
+    Le_Deploy_lighttpd_pem_path="${DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT}"
+  fi
+
+  # Ensure PEM_PATH exists
+  if [ -d "${Le_Deploy_lighttpd_pem_path}" ]; then
+    _debug "PEM_PATH ${Le_Deploy_lighttpd_pem_path} exists"
+  else
+    _err "PEM_PATH ${Le_Deploy_lighttpd_pem_path} does not exist"
+    return 1
+  fi
+
+  # PEM_NAME is optional. If not provided then assume "${DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT}"
+  _getdeployconf DEPLOY_LIGHTTPD_PEM_NAME
+  _debug2 DEPLOY_LIGHTTPD_PEM_NAME "${DEPLOY_LIGHTTPD_PEM_NAME}"
+  if [ -n "${DEPLOY_LIGHTTPD_PEM_NAME}" ]; then
+    Le_Deploy_lighttpd_pem_name="${DEPLOY_LIGHTTPD_PEM_NAME}"
+    _savedomainconf Le_Deploy_lighttpd_pem_name "${Le_Deploy_lighttpd_pem_name}"
+  elif [ -z "${Le_Deploy_lighttpd_pem_name}" ]; then
+    Le_Deploy_lighttpd_pem_name="${DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT}"
+  fi
+
+  # BUNDLE is optional. If not provided then assume "${DEPLOY_LIGHTTPD_BUNDLE_DEFAULT}"
+  _getdeployconf DEPLOY_LIGHTTPD_BUNDLE
+  _debug2 DEPLOY_LIGHTTPD_BUNDLE "${DEPLOY_LIGHTTPD_BUNDLE}"
+  if [ -n "${DEPLOY_LIGHTTPD_BUNDLE}" ]; then
+    Le_Deploy_lighttpd_bundle="${DEPLOY_LIGHTTPD_BUNDLE}"
+    _savedomainconf Le_Deploy_lighttpd_bundle "${Le_Deploy_lighttpd_bundle}"
+  elif [ -z "${Le_Deploy_lighttpd_bundle}" ]; then
+    Le_Deploy_lighttpd_bundle="${DEPLOY_LIGHTTPD_BUNDLE_DEFAULT}"
+  fi
+
+  # ISSUER is optional. If not provided then assume "${DEPLOY_LIGHTTPD_ISSUER_DEFAULT}"
+  _getdeployconf DEPLOY_LIGHTTPD_ISSUER
+  _debug2 DEPLOY_LIGHTTPD_ISSUER "${DEPLOY_LIGHTTPD_ISSUER}"
+  if [ -n "${DEPLOY_LIGHTTPD_ISSUER}" ]; then
+    Le_Deploy_lighttpd_issuer="${DEPLOY_LIGHTTPD_ISSUER}"
+    _savedomainconf Le_Deploy_lighttpd_issuer "${Le_Deploy_lighttpd_issuer}"
+  elif [ -z "${Le_Deploy_lighttpd_issuer}" ]; then
+    Le_Deploy_lighttpd_issuer="${DEPLOY_LIGHTTPD_ISSUER_DEFAULT}"
+  fi
+
+  # RELOAD is optional. If not provided then assume "${DEPLOY_LIGHTTPD_RELOAD_DEFAULT}"
+  _getdeployconf DEPLOY_LIGHTTPD_RELOAD
+  _debug2 DEPLOY_LIGHTTPD_RELOAD "${DEPLOY_LIGHTTPD_RELOAD}"
+  if [ -n "${DEPLOY_LIGHTTPD_RELOAD}" ]; then
+    Le_Deploy_lighttpd_reload="${DEPLOY_LIGHTTPD_RELOAD}"
+    _savedomainconf Le_Deploy_lighttpd_reload "${Le_Deploy_lighttpd_reload}"
+  elif [ -z "${Le_Deploy_lighttpd_reload}" ]; then
+    Le_Deploy_lighttpd_reload="${DEPLOY_LIGHTTPD_RELOAD_DEFAULT}"
+  fi
+
+  # Set the suffix depending if we are creating a bundle or not
+  if [ "${Le_Deploy_lighttpd_bundle}" = "yes" ]; then
+    _info "Bundle creation requested"
+    # Initialise $Le_Keylength if its not already set
+    if [ -z "${Le_Keylength}" ]; then
+      Le_Keylength=""
+    fi
+    if _isEccKey "${Le_Keylength}"; then
+      _info "ECC key type detected"
+      _suffix=".ecdsa"
+    else
+      _info "RSA key type detected"
+      _suffix=".rsa"
+    fi
+  else
+    _suffix=""
+  fi
+  _debug _suffix "${_suffix}"
+
+  # Set variables for later
+  _pem="${Le_Deploy_lighttpd_pem_path}/${Le_Deploy_lighttpd_pem_name}${_suffix}"
+  _issuer="${_pem}.issuer"
+  _ocsp="${_pem}.ocsp"
+  _reload="${Le_Deploy_lighttpd_reload}"
+
+  _info "Deploying PEM file"
+  # Create a temporary PEM file
+  _temppem="$(_mktemp)"
+  _debug _temppem "${_temppem}"
+  cat "${_ckey}" "${_ccert}" "${_cca}" >"${_temppem}"
+  _ret="$?"
+
+  # Check that we could create the temporary file
+  if [ "${_ret}" != "0" ]; then
+    _err "Error code ${_ret} returned during PEM file creation"
+    [ -f "${_temppem}" ] && rm -f "${_temppem}"
+    return ${_ret}
+  fi
+
+  # Move PEM file into place
+  _info "Moving new certificate into place"
+  _debug _pem "${_pem}"
+  cat "${_temppem}" >"${_pem}"
+  _ret=$?
+
+  # Clean up temp file
+  [ -f "${_temppem}" ] && rm -f "${_temppem}"
+
+  # Deal with any failure of moving PEM file into place
+  if [ "${_ret}" != "0" ]; then
+    _err "Error code ${_ret} returned while moving new certificate into place"
+    return ${_ret}
+  fi
+
+  # Update .issuer file if requested
+  if [ "${Le_Deploy_lighttpd_issuer}" = "yes" ]; then
+    _info "Updating .issuer file"
+    _debug _issuer "${_issuer}"
+    cat "${_cca}" >"${_issuer}"
+    _ret="$?"
+
+    if [ "${_ret}" != "0" ]; then
+      _err "Error code ${_ret} returned while copying issuer/CA certificate into place"
+      return ${_ret}
+    fi
+  else
+    [ -f "${_issuer}" ] && _err "Issuer file update not requested but .issuer file exists"
+  fi
+
+  # Update .ocsp file if certificate was requested with --ocsp/--ocsp-must-staple option
+  if [ -z "${Le_OCSP_Staple}" ]; then
+    Le_OCSP_Staple="0"
+  fi
+  if [ "${Le_OCSP_Staple}" = "1" ]; then
+    _info "Updating OCSP stapling info"
+    _debug _ocsp "${_ocsp}"
+    _info "Extracting OCSP URL"
+    _ocsp_url=$(${ACME_OPENSSL_BIN:-openssl} x509 -noout -ocsp_uri -in "${_pem}")
+    _debug _ocsp_url "${_ocsp_url}"
+
+    # Only process OCSP if URL was present
+    if [ "${_ocsp_url}" != "" ]; then
+      # Extract the hostname from the OCSP URL
+      _info "Extracting OCSP URL"
+      _ocsp_host=$(echo "${_ocsp_url}" | cut -d/ -f3)
+      _debug _ocsp_host "${_ocsp_host}"
+
+      # Only process the certificate if we have a .issuer file
+      if [ -r "${_issuer}" ]; then
+        # Check if issuer cert is also a root CA cert
+        _subjectdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -subject -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
+        _debug _subjectdn "${_subjectdn}"
+        _issuerdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -issuer -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
+        _debug _issuerdn "${_issuerdn}"
+        _info "Requesting OCSP response"
+        # If the issuer is a CA cert then our command line has "-CAfile" added
+        if [ "${_subjectdn}" = "${_issuerdn}" ]; then
+          _cafile_argument="-CAfile \"${_issuer}\""
+        else
+          _cafile_argument=""
+        fi
+        _debug _cafile_argument "${_cafile_argument}"
+        # if OpenSSL/LibreSSL is v1.1 or above, the format for the -header option has changed
+        _openssl_version=$(${ACME_OPENSSL_BIN:-openssl} version | cut -d' ' -f2)
+        _debug _openssl_version "${_openssl_version}"
+        _openssl_major=$(echo "${_openssl_version}" | cut -d '.' -f1)
+        _openssl_minor=$(echo "${_openssl_version}" | cut -d '.' -f2)
+        if [ "${_openssl_major}" -eq "1" ] && [ "${_openssl_minor}" -ge "1" ] || [ "${_openssl_major}" -ge "2" ]; then
+          _header_sep="="
+        else
+          _header_sep=" "
+        fi
+        # Request the OCSP response from the issuer and store it
+        _openssl_ocsp_cmd="${ACME_OPENSSL_BIN:-openssl} ocsp \
+          -issuer \"${_issuer}\" \
+          -cert \"${_pem}\" \
+          -url \"${_ocsp_url}\" \
+          -header Host${_header_sep}\"${_ocsp_host}\" \
+          -respout \"${_ocsp}\" \
+          -verify_other \"${_issuer}\" \
+          ${_cafile_argument} \
+          | grep -q \"${_pem}: good\""
+        _debug _openssl_ocsp_cmd "${_openssl_ocsp_cmd}"
+        eval "${_openssl_ocsp_cmd}"
+        _ret=$?
+      else
+        # Non fatal: No issuer file was present so no OCSP stapling file created
+        _err "OCSP stapling in use but no .issuer file was present"
+      fi
+    else
+      # Non fatal: No OCSP url was found int the certificate
+      _err "OCSP update requested but no OCSP URL was found in certificate"
+    fi
+
+    # Non fatal: Check return code of openssl command
+    if [ "${_ret}" != "0" ]; then
+      _err "Updating OCSP stapling failed with return code ${_ret}"
+    fi
+  else
+    # An OCSP file was already present but certificate did not have OCSP extension
+    if [ -f "${_ocsp}" ]; then
+      _err "OCSP was not requested but .ocsp file exists."
+      # Could remove the file at this step, although Lighttpd just ignores it in this case
+      # rm -f "${_ocsp}" || _err "Problem removing stale .ocsp file"
+    fi
+  fi
+
+  # Reload Lighttpd
+  _debug _reload "${_reload}"
+  eval "${_reload}"
+  _ret=$?
+  if [ "${_ret}" != "0" ]; then
+    _err "Error code ${_ret} during reload"
+    return ${_ret}
+  else
+    _info "Reload successful"
+  fi
+
+  return 0
+}

deploy/mailcow.sh

@@ -20,14 +20,25 @@ mailcow_deploy() {
   _debug _cca "$_cca"
   _debug _cfullchain "$_cfullchain"
 
-  _mailcow_path="${DEPLOY_MAILCOW_PATH}"
+  _getdeployconf DEPLOY_MAILCOW_PATH
+  _getdeployconf DEPLOY_MAILCOW_RELOAD
 
-  if [ -z "$_mailcow_path" ]; then
+  _debug DEPLOY_MAILCOW_PATH "$DEPLOY_MAILCOW_PATH"
+  _debug DEPLOY_MAILCOW_RELOAD "$DEPLOY_MAILCOW_RELOAD"
+
+  if [ -z "$DEPLOY_MAILCOW_PATH" ]; then
     _err "Mailcow path is not found, please define DEPLOY_MAILCOW_PATH."
     return 1
   fi
 
-  _ssl_path="${_mailcow_path}/data/assets/ssl/"
+  _savedeployconf DEPLOY_MAILCOW_PATH "$DEPLOY_MAILCOW_PATH"
+  [ -n "$DEPLOY_MAILCOW_RELOAD" ] && _savedeployconf DEPLOY_MAILCOW_RELOAD "$DEPLOY_MAILCOW_RELOAD"
+
+  _ssl_path="$DEPLOY_MAILCOW_PATH"
+  if [ -f "$DEPLOY_MAILCOW_PATH/generate_config.sh" ]; then
+    _ssl_path="$DEPLOY_MAILCOW_PATH/data/assets/ssl/"
+  fi
+
   if [ ! -d "$_ssl_path" ]; then
     _err "Cannot find mailcow ssl path: $_ssl_path"
     return 1
@@ -46,7 +57,7 @@ mailcow_deploy() {
     return 1
   fi
 
-  DEFAULT_MAILCOW_RELOAD="cd ${_mailcow_path} && docker-compose restart postfix-mailcow dovecot-mailcow nginx-mailcow"
+  DEFAULT_MAILCOW_RELOAD="docker restart \$(docker ps --quiet --filter name=nginx-mailcow --filter name=dovecot-mailcow --filter name=postfix-mailcow)"
   _reload="${DEPLOY_MAILCOW_RELOAD:-$DEFAULT_MAILCOW_RELOAD}"
 
   _info "Run reload: $_reload"

deploy/openmediavault.sh

@@ -0,0 +1,156 @@
+#!/usr/bin/env sh
+
+# This deploy hook is tested on OpenMediaVault 5.x. It supports both local and remote deployment.
+# The way it works is that if a cert with the matching domain name is not found, it will firstly create a dummy cert to get its uuid, and then replace it with your cert.
+#
+# DEPLOY_OMV_WEBUI_ADMIN - This is OMV web gui admin account. Default value is admin. It's required as the user parameter (-u) for the omv-rpc command.
+# DEPLOY_OMV_HOST and DEPLOY_OMV_SSH_USER are optional. They are used for remote deployment through ssh (support public key authentication only). Per design, OMV web gui admin doesn't have ssh permission, so another account is needed for ssh.
+#
+# returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+openmediavault_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  _getdeployconf DEPLOY_OMV_WEBUI_ADMIN
+
+  if [ -z "$DEPLOY_OMV_WEBUI_ADMIN" ]; then
+    DEPLOY_OMV_WEBUI_ADMIN="admin"
+  fi
+
+  _savedeployconf DEPLOY_OMV_WEBUI_ADMIN "$DEPLOY_OMV_WEBUI_ADMIN"
+
+  _getdeployconf DEPLOY_OMV_HOST
+  _getdeployconf DEPLOY_OMV_SSH_USER
+
+  if [ -n "$DEPLOY_OMV_HOST" ] && [ -n "$DEPLOY_OMV_SSH_USER" ]; then
+    _info "[OMV deploy-hook] Deploy certificate remotely through ssh."
+    _savedeployconf DEPLOY_OMV_HOST "$DEPLOY_OMV_HOST"
+    _savedeployconf DEPLOY_OMV_SSH_USER "$DEPLOY_OMV_SSH_USER"
+  else
+    _info "[OMV deploy-hook] Deploy certificate locally."
+  fi
+
+  if [ -n "$DEPLOY_OMV_HOST" ] && [ -n "$DEPLOY_OMV_SSH_USER" ]; then
+
+    _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'CertificateMgmt' 'getList' '{\"start\": 0, \"limit\": -1}' | jq -r '.data[] | select(.name==\"/CN='$_cdomain'\") | .uuid'"
+    # shellcheck disable=SC2029
+    _uuid=$(ssh "$DEPLOY_OMV_SSH_USER@$DEPLOY_OMV_HOST" "$_command")
+    _debug _command "$_command"
+
+    if [ -z "$_uuid" ]; then
+      _info "[OMV deploy-hook] Domain $_cdomain has no certificate in openmediavault, creating it!"
+      _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'CertificateMgmt' 'create' '{\"cn\": \"test.example.com\", \"size\": 4096, \"days\": 3650, \"c\": \"\", \"st\": \"\", \"l\": \"\", \"o\": \"\", \"ou\": \"\", \"email\": \"\"}' | jq -r '.uuid'"
+      # shellcheck disable=SC2029
+      _uuid=$(ssh "$DEPLOY_OMV_SSH_USER@$DEPLOY_OMV_HOST" "$_command")
+      _debug _command "$_command"
+
+      if [ -z "$_uuid" ]; then
+        _err "[OMV deploy-hook] An error occured while creating the certificate"
+        return 1
+      fi
+    fi
+
+    _info "[OMV deploy-hook] Domain $_cdomain has uuid: $_uuid"
+    _fullchain=$(jq <"$_cfullchain" -aRs .)
+    _key=$(jq <"$_ckey" -aRs .)
+
+    _debug _fullchain "$_fullchain"
+    _debug _key "$_key"
+
+    _info "[OMV deploy-hook] Updating key and certificate in openmediavault"
+    _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'CertificateMgmt' 'set' '{\"uuid\":\"$_uuid\", \"certificate\":$_fullchain, \"privatekey\":$_key, \"comment\":\"acme.sh deployed $(date)\"}'"
+    # shellcheck disable=SC2029
+    _result=$(ssh "$DEPLOY_OMV_SSH_USER@$DEPLOY_OMV_HOST" "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+    _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'WebGui' 'setSettings' \$(omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'WebGui' 'getSettings' | jq -c '.sslcertificateref=\"$_uuid\"')"
+    # shellcheck disable=SC2029
+    _result=$(ssh "$DEPLOY_OMV_SSH_USER@$DEPLOY_OMV_HOST" "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+    _info "[OMV deploy-hook] Asking openmediavault to apply changes... (this could take some time, hang in there)"
+    _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'Config' 'applyChanges' '{\"modules\":[], \"force\": false}'"
+    # shellcheck disable=SC2029
+    _result=$(ssh "$DEPLOY_OMV_SSH_USER@$DEPLOY_OMV_HOST" "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+    _info "[OMV deploy-hook] Asking nginx to reload"
+    _command="nginx -s reload"
+    # shellcheck disable=SC2029
+    _result=$(ssh "$DEPLOY_OMV_SSH_USER@$DEPLOY_OMV_HOST" "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+  else
+
+    # shellcheck disable=SC2086
+    _uuid=$(omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'CertificateMgmt' 'getList' '{"start": 0, "limit": -1}' | jq -r '.data[] | select(.name=="/CN='$_cdomain'") | .uuid')
+    if [ -z "$_uuid" ]; then
+      _info "[OMV deploy-hook] Domain $_cdomain has no certificate in openmediavault, creating it!"
+      # shellcheck disable=SC2086
+      _uuid=$(omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'CertificateMgmt' 'create' '{"cn": "test.example.com", "size": 4096, "days": 3650, "c": "", "st": "", "l": "", "o": "", "ou": "", "email": ""}' | jq -r '.uuid')
+
+      if [ -z "$_uuid" ]; then
+        _err "[OMB deploy-hook] An error occured while creating the certificate"
+        return 1
+      fi
+    fi
+
+    _info "[OMV deploy-hook] Domain $_cdomain has uuid: $_uuid"
+    _fullchain=$(jq <"$_cfullchain" -aRs .)
+    _key=$(jq <"$_ckey" -aRs .)
+
+    _debug _fullchain "$_fullchain"
+    _debug _key "$_key"
+
+    _info "[OMV deploy-hook] Updating key and certificate in openmediavault"
+    _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'CertificateMgmt' 'set' '{\"uuid\":\"$_uuid\", \"certificate\":$_fullchain, \"privatekey\":$_key, \"comment\":\"acme.sh deployed $(date)\"}'"
+    _result=$(eval "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+    _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'WebGui' 'setSettings' \$(omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'WebGui' 'getSettings' | jq -c '.sslcertificateref=\"$_uuid\"')"
+    _result=$(eval "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+    _info "[OMV deploy-hook] Asking openmediavault to apply changes... (this could take some time, hang in there)"
+    _command="omv-rpc -u $DEPLOY_OMV_WEBUI_ADMIN 'Config' 'applyChanges' '{\"modules\":[], \"force\": false}'"
+    _result=$(eval "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+    _info "[OMV deploy-hook] Asking nginx to reload"
+    _command="nginx -s reload"
+    _result=$(eval "$_command")
+
+    _debug _command "$_command"
+    _debug _result "$_result"
+
+  fi
+
+  return 0
+}

deploy/peplink.sh

@@ -0,0 +1,123 @@
+#!/usr/bin/env sh
+
+# Script to deploy cert to Peplink Routers
+#
+# The following environment variables must be set:
+#
+# PEPLINK_Hostname - Peplink hostname
+# PEPLINK_Username - Peplink username to login
+# PEPLINK_Password - Peplink password to login
+#
+# The following environmental variables may be set if you don't like their
+# default values:
+#
+# PEPLINK_Certtype - Certificate type to target for replacement
+#                    defaults to "webadmin", can be one of:
+#                      * "chub" (ContentHub)
+#                      * "openvpn" (OpenVPN CA)
+#                      * "portal" (Captive Portal SSL)
+#                      * "webadmin" (Web Admin SSL)
+#                      * "webproxy" (Proxy Root CA)
+#                      * "wwan_ca" (Wi-Fi WAN CA)
+#                      * "wwan_client" (Wi-Fi WAN Client)
+# PEPLINK_Scheme   - defaults to "https"
+# PEPLINK_Port     - defaults to "443"
+#
+#returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+_peplink_get_cookie_data() {
+  grep -i "\W$1=" | grep -i "^Set-Cookie:" | _tail_n 1 | _egrep_o "$1=[^;]*;" | tr -d ';'
+}
+
+#domain keyfile certfile cafile fullchain
+peplink_deploy() {
+
+  _cdomain="$1"
+  _ckey="$2"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _cfullchain "$_cfullchain"
+  _debug _ckey "$_ckey"
+
+  # Get Hostname, Username and Password, but don't save until we successfully authenticate
+  _getdeployconf PEPLINK_Hostname
+  _getdeployconf PEPLINK_Username
+  _getdeployconf PEPLINK_Password
+  if [ -z "${PEPLINK_Hostname:-}" ] || [ -z "${PEPLINK_Username:-}" ] || [ -z "${PEPLINK_Password:-}" ]; then
+    _err "PEPLINK_Hostname & PEPLINK_Username & PEPLINK_Password must be set"
+    return 1
+  fi
+  _debug2 PEPLINK_Hostname "$PEPLINK_Hostname"
+  _debug2 PEPLINK_Username "$PEPLINK_Username"
+  _secure_debug2 PEPLINK_Password "$PEPLINK_Password"
+
+  # Optional certificate type, scheme, and port for Peplink
+  _getdeployconf PEPLINK_Certtype
+  _getdeployconf PEPLINK_Scheme
+  _getdeployconf PEPLINK_Port
+
+  # Don't save the certificate type until we verify it exists and is supported
+  _savedeployconf PEPLINK_Scheme "$PEPLINK_Scheme"
+  _savedeployconf PEPLINK_Port "$PEPLINK_Port"
+
+  # Default vaules for certificate type, scheme, and port
+  [ -n "${PEPLINK_Certtype}" ] || PEPLINK_Certtype="webadmin"
+  [ -n "${PEPLINK_Scheme}" ] || PEPLINK_Scheme="https"
+  [ -n "${PEPLINK_Port}" ] || PEPLINK_Port="443"
+
+  _debug2 PEPLINK_Certtype "$PEPLINK_Certtype"
+  _debug2 PEPLINK_Scheme "$PEPLINK_Scheme"
+  _debug2 PEPLINK_Port "$PEPLINK_Port"
+
+  _base_url="$PEPLINK_Scheme://$PEPLINK_Hostname:$PEPLINK_Port"
+  _debug _base_url "$_base_url"
+
+  # Login, get the auth token from the cookie
+  _info "Logging into $PEPLINK_Hostname:$PEPLINK_Port"
+  encoded_username="$(printf "%s" "$PEPLINK_Username" | _url_encode)"
+  encoded_password="$(printf "%s" "$PEPLINK_Password" | _url_encode)"
+  response=$(_post "func=login&username=$encoded_username&password=$encoded_password" "$_base_url/cgi-bin/MANGA/api.cgi")
+  auth_token=$(_peplink_get_cookie_data "bauth" <"$HTTP_HEADER")
+  _debug3 response "$response"
+  _debug auth_token "$auth_token"
+
+  if [ -z "$auth_token" ]; then
+    _err "Unable to authenticate to $PEPLINK_Hostname:$PEPLINK_Port using $PEPLINK_Scheme."
+    _err "Check your username and password."
+    return 1
+  fi
+
+  _H1="Cookie: $auth_token"
+  export _H1
+  _debug2 H1 "${_H1}"
+
+  # Now that we know the hostnameusername and password are good, save them
+  _savedeployconf PEPLINK_Hostname "$PEPLINK_Hostname"
+  _savedeployconf PEPLINK_Username "$PEPLINK_Username"
+  _savedeployconf PEPLINK_Password "$PEPLINK_Password"
+
+  _info "Generate form POST request"
+
+  encoded_key="$(_url_encode <"$_ckey")"
+  encoded_fullchain="$(_url_encode <"$_cfullchain")"
+  body="cert_type=$PEPLINK_Certtype&cert_uid=&section=CERT_modify&key_pem=$encoded_key&key_pem_passphrase=&key_pem_passphrase_confirm=&cert_pem=$encoded_fullchain"
+  _debug3 body "$body"
+
+  _info "Upload $PEPLINK_Certtype certificate to the Peplink"
+
+  response=$(_post "$body" "$_base_url/cgi-bin/MANGA/admin.cgi")
+  _debug3 response "$response"
+
+  if echo "$response" | grep 'Success' >/dev/null; then
+    # We've verified this certificate type is valid, so save it
+    _savedeployconf PEPLINK_Certtype "$PEPLINK_Certtype"
+    _info "Certificate was updated"
+    return 0
+  else
+    _err "Unable to update certificate, error code $response"
+    return 1
+  fi
+}

deploy/proxmoxve.sh

@@ -0,0 +1,132 @@
+#!/usr/bin/env sh
+
+# Deploy certificates to a proxmox virtual environment node using the API.
+#
+# Environment variables that can be set are:
+# `DEPLOY_PROXMOXVE_SERVER`: The hostname of the proxmox ve node. Defaults to
+#                            _cdomain.
+# `DEPLOY_PROXMOXVE_SERVER_PORT`: The port number the management interface is on.
+#                                 Defaults to 8006.
+# `DEPLOY_PROXMOXVE_NODE_NAME`: The name of the node we'll be connecting to.
+#                               Defaults to the host portion of the server
+#                               domain name.
+# `DEPLOY_PROXMOXVE_USER`: The user we'll connect as. Defaults to root.
+# `DEPLOY_PROXMOXVE_USER_REALM`: The authentication realm the user authenticates
+#                                with. Defaults to pam.
+# `DEPLOY_PROXMOXVE_API_TOKEN_NAME`: The name of the API token created for the
+#                                    user account. Defaults to acme.
+# `DEPLOY_PROXMOXVE_API_TOKEN_KEY`: The API token. Required.
+
+proxmoxve_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug2 _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  # "Sane" defaults.
+  _getdeployconf DEPLOY_PROXMOXVE_SERVER
+  if [ -z "$DEPLOY_PROXMOXVE_SERVER" ]; then
+    _target_hostname="$_cdomain"
+  else
+    _target_hostname="$DEPLOY_PROXMOXVE_SERVER"
+    _savedeployconf DEPLOY_PROXMOXVE_SERVER "$DEPLOY_PROXMOXVE_SERVER"
+  fi
+  _debug2 DEPLOY_PROXMOXVE_SERVER "$_target_hostname"
+
+  _getdeployconf DEPLOY_PROXMOXVE_SERVER_PORT
+  if [ -z "$DEPLOY_PROXMOXVE_SERVER_PORT" ]; then
+    _target_port="8006"
+  else
+    _target_port="$DEPLOY_PROXMOXVE_SERVER_PORT"
+    _savedeployconf DEPLOY_PROXMOXVE_SERVER_PORT "$DEPLOY_PROXMOXVE_SERVER_PORT"
+  fi
+  _debug2 DEPLOY_PROXMOXVE_SERVER_PORT "$_target_port"
+
+  _getdeployconf DEPLOY_PROXMOXVE_NODE_NAME
+  if [ -z "$DEPLOY_PROXMOXVE_NODE_NAME" ]; then
+    _node_name=$(echo "$_target_hostname" | cut -d. -f1)
+  else
+    _node_name="$DEPLOY_PROXMOXVE_NODE_NAME"
+    _savedeployconf DEPLOY_PROXMOXVE_NODE_NAME "$DEPLOY_PROXMOXVE_NODE_NAME"
+  fi
+  _debug2 DEPLOY_PROXMOXVE_NODE_NAME "$_node_name"
+
+  # Complete URL.
+  _target_url="https://${_target_hostname}:${_target_port}/api2/json/nodes/${_node_name}/certificates/custom"
+  _debug TARGET_URL "$_target_url"
+
+  # More "sane" defaults.
+  _getdeployconf DEPLOY_PROXMOXVE_USER
+  if [ -z "$DEPLOY_PROXMOXVE_USER" ]; then
+    _proxmoxve_user="root"
+  else
+    _proxmoxve_user="$DEPLOY_PROXMOXVE_USER"
+    _savedeployconf DEPLOY_PROXMOXVE_USER "$DEPLOY_PROXMOXVE_USER"
+  fi
+  _debug2 DEPLOY_PROXMOXVE_USER "$_proxmoxve_user"
+
+  _getdeployconf DEPLOY_PROXMOXVE_USER_REALM
+  if [ -z "$DEPLOY_PROXMOXVE_USER_REALM" ]; then
+    _proxmoxve_user_realm="pam"
+  else
+    _proxmoxve_user_realm="$DEPLOY_PROXMOXVE_USER_REALM"
+    _savedeployconf DEPLOY_PROXMOXVE_USER_REALM "$DEPLOY_PROXMOXVE_USER_REALM"
+  fi
+  _debug2 DEPLOY_PROXMOXVE_USER_REALM "$_proxmoxve_user_realm"
+
+  _getdeployconf DEPLOY_PROXMOXVE_API_TOKEN_NAME
+  if [ -z "$DEPLOY_PROXMOXVE_API_TOKEN_NAME" ]; then
+    _proxmoxve_api_token_name="acme"
+  else
+    _proxmoxve_api_token_name="$DEPLOY_PROXMOXVE_API_TOKEN_NAME"
+    _savedeployconf DEPLOY_PROXMOXVE_API_TOKEN_NAME "$DEPLOY_PROXMOXVE_API_TOKEN_NAME"
+  fi
+  _debug2 DEPLOY_PROXMOXVE_API_TOKEN_NAME "$_proxmoxve_api_token_name"
+
+  # This is required.
+  _getdeployconf DEPLOY_PROXMOXVE_API_TOKEN_KEY
+  if [ -z "$DEPLOY_PROXMOXVE_API_TOKEN_KEY" ]; then
+    _err "API key not provided."
+    return 1
+  else
+    _proxmoxve_api_token_key="$DEPLOY_PROXMOXVE_API_TOKEN_KEY"
+    _savedeployconf DEPLOY_PROXMOXVE_API_TOKEN_KEY "$DEPLOY_PROXMOXVE_API_TOKEN_KEY"
+  fi
+  _debug2 DEPLOY_PROXMOXVE_API_TOKEN_KEY _proxmoxve_api_token_key
+
+  # PVE API Token header value. Used in "Authorization: PVEAPIToken".
+  _proxmoxve_header_api_token="${_proxmoxve_user}@${_proxmoxve_user_realm}!${_proxmoxve_api_token_name}=${_proxmoxve_api_token_key}"
+  _debug2 "Auth Header" _proxmoxve_header_api_token
+
+  # Ugly. I hate putting heredocs inside functions because heredocs don't
+  # account for whitespace correctly but it _does_ work and is several times
+  # cleaner than anything else I had here.
+  #
+  # This dumps the json payload to a variable that should be passable to the
+  # _psot function.
+  _json_payload=$(
+    cat <<HEREDOC
+{
+  "certificates": "$(tr '\n' ':' <"$_cfullchain" | sed 's/:/\\n/g')",
+  "key": "$(tr '\n' ':' <"$_ckey" | sed 's/:/\\n/g')",
+  "node":"$_node_name",
+  "restart":"1",
+  "force":"1"
+}
+HEREDOC
+  )
+  _debug2 Payload "$_json_payload"
+
+  # Push certificates to server.
+  export _HTTPS_INSECURE=1
+  export _H1="Authorization: PVEAPIToken=${_proxmoxve_header_api_token}"
+  _post "$_json_payload" "$_target_url" "" POST "application/json"
+
+}

deploy/qiniu.sh

@@ -53,7 +53,7 @@ qiniu_deploy() {
   sslcert_access_token="$(_make_access_token "$sslcert_path")"
   _debug sslcert_access_token "$sslcert_access_token"
   export _H1="Authorization: QBox $sslcert_access_token"
-  sslcert_response=$(_post "$sslcerl_body" "$QINIU_API_BASE$sslcert_path" 0 "POST" "application/json" | _dbase64 "multiline")
+  sslcert_response=$(_post "$sslcerl_body" "$QINIU_API_BASE$sslcert_path" 0 "POST" "application/json" | _dbase64)
 
   if ! _contains "$sslcert_response" "certID"; then
     _err "Error in creating certificate:"
@@ -75,7 +75,7 @@ qiniu_deploy() {
     update_access_token="$(_make_access_token "$update_path")"
     _debug update_access_token "$update_access_token"
     export _H1="Authorization: QBox $update_access_token"
-    update_response=$(_post "$update_body" "$QINIU_API_BASE$update_path" 0 "PUT" "application/json" | _dbase64 "multiline")
+    update_response=$(_post "$update_body" "$QINIU_API_BASE$update_path" 0 "PUT" "application/json" | _dbase64)
 
     if _contains "$update_response" "error"; then
       _err "Error in updating domain $domain httpsconf:"

deploy/routeros.sh

@@ -23,6 +23,7 @@
 # ```sh
 # export ROUTER_OS_USERNAME=certuser
 # export ROUTER_OS_HOST=router.example.com
+# export ROUTER_OS_PORT=22
 #
 # acme.sh --deploy -d ftp.example.com --deploy-hook routeros
 # ```
@@ -48,6 +49,16 @@
 # One optional thing to do as well is to create a script that updates
 # all the required services and run that script in a single command.
 #
+# To adopt parameters to `scp` and/or `ssh` set the optional
+# `ROUTER_OS_SSH_CMD` and `ROUTER_OS_SCP_CMD` variables accordingly,
+# see ssh(1) and scp(1) for parameters to those commands.
+#
+# Example:
+# ```ssh
+# export ROUTER_OS_SSH_CMD="ssh -i /acme.sh/.ssh/router.example.com -o UserKnownHostsFile=/acme.sh/.ssh/known_hosts"
+# export ROUTER_OS_SCP_CMD="scp -i /acme.sh/.ssh/router.example.com -o UserKnownHostsFile=/acme.sh/.ssh/known_hosts"
+# ````
+#
 # returns 0 means success, otherwise error.
 
 ########  Public functions #####################
@@ -59,6 +70,7 @@ routeros_deploy() {
   _ccert="$3"
   _cca="$4"
   _cfullchain="$5"
+  _err_code=0
 
   _debug _cdomain "$_cdomain"
   _debug _ckey "$_ckey"
@@ -66,29 +78,70 @@ routeros_deploy() {
   _debug _cca "$_cca"
   _debug _cfullchain "$_cfullchain"
 
+  _getdeployconf ROUTER_OS_HOST
+
   if [ -z "$ROUTER_OS_HOST" ]; then
     _debug "Using _cdomain as ROUTER_OS_HOST, please set if not correct."
     ROUTER_OS_HOST="$_cdomain"
   fi
 
+  _getdeployconf ROUTER_OS_USERNAME
+
   if [ -z "$ROUTER_OS_USERNAME" ]; then
     _err "Need to set the env variable ROUTER_OS_USERNAME"
     return 1
   fi
 
+  _getdeployconf ROUTER_OS_PORT
+
+  if [ -z "$ROUTER_OS_PORT" ]; then
+    _debug "Using default port 22 as ROUTER_OS_PORT, please set if not correct."
+    ROUTER_OS_PORT=22
+  fi
+
+  _getdeployconf ROUTER_OS_SSH_CMD
+
+  if [ -z "$ROUTER_OS_SSH_CMD" ]; then
+    _debug "Use default ssh setup."
+    ROUTER_OS_SSH_CMD="ssh -p $ROUTER_OS_PORT"
+  fi
+
+  _getdeployconf ROUTER_OS_SCP_CMD
+
+  if [ -z "$ROUTER_OS_SCP_CMD" ]; then
+    _debug "USe default scp setup."
+    ROUTER_OS_SCP_CMD="scp -P $ROUTER_OS_PORT"
+  fi
+
+  _getdeployconf ROUTER_OS_ADDITIONAL_SERVICES
+
   if [ -z "$ROUTER_OS_ADDITIONAL_SERVICES" ]; then
     _debug "Not enabling additional services"
     ROUTER_OS_ADDITIONAL_SERVICES=""
   fi
 
-  _info "Trying to push key '$_ckey' to router"
-  scp "$_ckey" "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST:$_cdomain.key"
-  _info "Trying to push cert '$_cfullchain' to router"
-  scp "$_cfullchain" "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST:$_cdomain.cer"
-  DEPLOY_SCRIPT_CMD="/system script add name=\"LE Cert Deploy - $_cdomain\" owner=admin policy=ftp,read,write,password,sensitive \
-source=\"## generated by routeros deploy script in acme.sh;\
-\n/certificate remove [ find name=$_cdomain.cer_0 ];\
+  _savedeployconf ROUTER_OS_HOST "$ROUTER_OS_HOST"
+  _savedeployconf ROUTER_OS_USERNAME "$ROUTER_OS_USERNAME"
+  _savedeployconf ROUTER_OS_PORT "$ROUTER_OS_PORT"
+  _savedeployconf ROUTER_OS_SSH_CMD "$ROUTER_OS_SSH_CMD"
+  _savedeployconf ROUTER_OS_SCP_CMD "$ROUTER_OS_SCP_CMD"
+  _savedeployconf ROUTER_OS_ADDITIONAL_SERVICES "$ROUTER_OS_ADDITIONAL_SERVICES"
+
+  # push key to routeros
+  if ! _scp_certificate "$_ckey" "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST:$_cdomain.key"; then
+    return $_err_code
+  fi
+
+  # push certificate chain to routeros
+  if ! _scp_certificate "$_cfullchain" "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST:$_cdomain.cer"; then
+    return $_err_code
+  fi
+
+  DEPLOY_SCRIPT_CMD="/system script add name=\"LE Cert Deploy - $_cdomain\" owner=$ROUTER_OS_USERNAME \
+comment=\"generated by routeros deploy script in acme.sh\" \
+source=\"/certificate remove [ find name=$_cdomain.cer_0 ];\
 \n/certificate remove [ find name=$_cdomain.cer_1 ];\
+\n/certificate remove [ find name=$_cdomain.cer_2 ];\
 \ndelay 1;\
 \n/certificate import file-name=$_cdomain.cer passphrase=\\\"\\\";\
 \n/certificate import file-name=$_cdomain.key passphrase=\\\"\\\";\
@@ -100,12 +153,51 @@ source=\"## generated by routeros deploy script in acme.sh;\
 \n$ROUTER_OS_ADDITIONAL_SERVICES;\
 \n\"
 "
-  # shellcheck disable=SC2029
-  ssh "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST" "$DEPLOY_SCRIPT_CMD"
-  # shellcheck disable=SC2029
-  ssh "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST" "/system script run \"LE Cert Deploy - $_cdomain\""
-  # shellcheck disable=SC2029
-  ssh "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST" "/system script remove \"LE Cert Deploy - $_cdomain\""
+
+  if ! _ssh_remote_cmd "$DEPLOY_SCRIPT_CMD"; then
+    return $_err_code
+  fi
+
+  if ! _ssh_remote_cmd "/system script run \"LE Cert Deploy - $_cdomain\""; then
+    return $_err_code
+  fi
+
+  if ! _ssh_remote_cmd "/system script remove \"LE Cert Deploy - $_cdomain\""; then
+    return $_err_code
+  fi
 
   return 0
 }
+
+# inspired by deploy/ssh.sh
+_ssh_remote_cmd() {
+  _cmd="$1"
+  _secure_debug "Remote commands to execute: $_cmd"
+  _info "Submitting sequence of commands to routeros"
+  # quotations in bash cmd below intended.  Squash travis spellcheck error
+  # shellcheck disable=SC2029
+  $ROUTER_OS_SSH_CMD "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST" "$_cmd"
+  _err_code="$?"
+
+  if [ "$_err_code" != "0" ]; then
+    _err "Error code $_err_code returned from routeros"
+  fi
+
+  return $_err_code
+}
+
+_scp_certificate() {
+  _src="$1"
+  _dst="$2"
+  _secure_debug "scp '$_src' to '$_dst'"
+  _info "Push key '$_src' to routeros"
+
+  $ROUTER_OS_SCP_CMD "$_src" "$_dst"
+  _err_code="$?"
+
+  if [ "$_err_code" != "0" ]; then
+    _err "Error code $_err_code returned from scp"
+  fi
+
+  return $_err_code
+}

deploy/ssh.sh

@@ -14,7 +14,7 @@
 # The following examples are for QNAP NAS running QTS 4.2
 # export DEPLOY_SSH_CMD=""  # defaults to "ssh -T"
 # export DEPLOY_SSH_USER="admin"  # required
-# export DEPLOY_SSH_SERVER="qnap"  # defaults to domain name
+# export DEPLOY_SSH_SERVER="host1 host2:8022 192.168.0.1:9022"  # defaults to domain name, support multiple servers with optional port
 # export DEPLOY_SSH_KEYFILE="/etc/stunnel/stunnel.pem"
 # export DEPLOY_SSH_CERTFILE="/etc/stunnel/stunnel.pem"
 # export DEPLOY_SSH_CAFILE="/etc/stunnel/uca.pem"
@@ -23,6 +23,8 @@
 # export DEPLOY_SSH_BACKUP=""  # yes or no, default to yes or previously saved value
 # export DEPLOY_SSH_BACKUP_PATH=".acme_ssh_deploy"  # path on remote system. Defaults to .acme_ssh_deploy
 # export DEPLOY_SSH_MULTI_CALL=""  # yes or no, default to no or previously saved value
+# export DEPLOY_SSH_USE_SCP="" yes or no, default to no
+# export DEPLOY_SSH_SCP_CMD="" defaults to "scp -q"
 #
 ########  Public functions #####################
 
@@ -35,11 +37,6 @@ ssh_deploy() {
   _cfullchain="$5"
   _deploy_ssh_servers=""
 
-  if [ -f "$DOMAIN_CONF" ]; then
-    # shellcheck disable=SC1090
-    . "$DOMAIN_CONF"
-  fi
-
   _debug _cdomain "$_cdomain"
   _debug _ckey "$_ckey"
   _debug _ccert "$_ccert"
@@ -47,60 +44,134 @@ ssh_deploy() {
   _debug _cfullchain "$_cfullchain"
 
   # USER is required to login by SSH to remote host.
+  _migratedeployconf Le_Deploy_ssh_user DEPLOY_SSH_USER
+  _getdeployconf DEPLOY_SSH_USER
+  _debug2 DEPLOY_SSH_USER "$DEPLOY_SSH_USER"
   if [ -z "$DEPLOY_SSH_USER" ]; then
-    if [ -z "$Le_Deploy_ssh_user" ]; then
-      _err "DEPLOY_SSH_USER not defined."
-      return 1
-    fi
-  else
-    Le_Deploy_ssh_user="$DEPLOY_SSH_USER"
-    _savedomainconf Le_Deploy_ssh_user "$Le_Deploy_ssh_user"
+    _err "DEPLOY_SSH_USER not defined."
+    return 1
   fi
+  _savedeployconf DEPLOY_SSH_USER "$DEPLOY_SSH_USER"
 
   # SERVER is optional. If not provided then use _cdomain
-  if [ -n "$DEPLOY_SSH_SERVER" ]; then
-    Le_Deploy_ssh_server="$DEPLOY_SSH_SERVER"
-    _savedomainconf Le_Deploy_ssh_server "$Le_Deploy_ssh_server"
-  elif [ -z "$Le_Deploy_ssh_server" ]; then
-    Le_Deploy_ssh_server="$_cdomain"
+  _migratedeployconf Le_Deploy_ssh_server DEPLOY_SSH_SERVER
+  _getdeployconf DEPLOY_SSH_SERVER
+  _debug2 DEPLOY_SSH_SERVER "$DEPLOY_SSH_SERVER"
+  if [ -z "$DEPLOY_SSH_SERVER" ]; then
+    DEPLOY_SSH_SERVER="$_cdomain"
   fi
+  _savedeployconf DEPLOY_SSH_SERVER "$DEPLOY_SSH_SERVER"
 
   # CMD is optional. If not provided then use ssh
-  if [ -n "$DEPLOY_SSH_CMD" ]; then
-    Le_Deploy_ssh_cmd="$DEPLOY_SSH_CMD"
-    _savedomainconf Le_Deploy_ssh_cmd "$Le_Deploy_ssh_cmd"
-  elif [ -z "$Le_Deploy_ssh_cmd" ]; then
-    Le_Deploy_ssh_cmd="ssh -T"
+  _migratedeployconf Le_Deploy_ssh_cmd DEPLOY_SSH_CMD
+  _getdeployconf DEPLOY_SSH_CMD
+  _debug2 DEPLOY_SSH_CMD "$DEPLOY_SSH_CMD"
+  if [ -z "$DEPLOY_SSH_CMD" ]; then
+    DEPLOY_SSH_CMD="ssh -T"
   fi
+  _savedeployconf DEPLOY_SSH_CMD "$DEPLOY_SSH_CMD"
 
   # BACKUP is optional. If not provided then default to previously saved value or yes.
-  if [ "$DEPLOY_SSH_BACKUP" = "no" ]; then
-    Le_Deploy_ssh_backup="no"
-  elif [ -z "$Le_Deploy_ssh_backup" ] || [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
-    Le_Deploy_ssh_backup="yes"
+  _migratedeployconf Le_Deploy_ssh_backup DEPLOY_SSH_BACKUP
+  _getdeployconf DEPLOY_SSH_BACKUP
+  _debug2 DEPLOY_SSH_BACKUP "$DEPLOY_SSH_BACKUP"
+  if [ -z "$DEPLOY_SSH_BACKUP" ]; then
+    DEPLOY_SSH_BACKUP="yes"
   fi
-  _savedomainconf Le_Deploy_ssh_backup "$Le_Deploy_ssh_backup"
+  _savedeployconf DEPLOY_SSH_BACKUP "$DEPLOY_SSH_BACKUP"
 
   # BACKUP_PATH is optional. If not provided then default to previously saved value or .acme_ssh_deploy
-  if [ -n "$DEPLOY_SSH_BACKUP_PATH" ]; then
-    Le_Deploy_ssh_backup_path="$DEPLOY_SSH_BACKUP_PATH"
-  elif [ -z "$Le_Deploy_ssh_backup_path" ]; then
-    Le_Deploy_ssh_backup_path=".acme_ssh_deploy"
+  _migratedeployconf Le_Deploy_ssh_backup_path DEPLOY_SSH_BACKUP_PATH
+  _getdeployconf DEPLOY_SSH_BACKUP_PATH
+  _debug2 DEPLOY_SSH_BACKUP_PATH "$DEPLOY_SSH_BACKUP_PATH"
+  if [ -z "$DEPLOY_SSH_BACKUP_PATH" ]; then
+    DEPLOY_SSH_BACKUP_PATH=".acme_ssh_deploy"
   fi
-  _savedomainconf Le_Deploy_ssh_backup_path "$Le_Deploy_ssh_backup_path"
+  _savedeployconf DEPLOY_SSH_BACKUP_PATH "$DEPLOY_SSH_BACKUP_PATH"
 
   # MULTI_CALL is optional. If not provided then default to previously saved
   # value (which may be undefined... equivalent to "no").
-  if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
-    Le_Deploy_ssh_multi_call="yes"
-    _savedomainconf Le_Deploy_ssh_multi_call "$Le_Deploy_ssh_multi_call"
-  elif [ "$DEPLOY_SSH_MULTI_CALL" = "no" ]; then
-    Le_Deploy_ssh_multi_call=""
-    _cleardomainconf Le_Deploy_ssh_multi_call
+  _migratedeployconf Le_Deploy_ssh_multi_call DEPLOY_SSH_MULTI_CALL
+  _getdeployconf DEPLOY_SSH_MULTI_CALL
+  _debug2 DEPLOY_SSH_MULTI_CALL "$DEPLOY_SSH_MULTI_CALL"
+  if [ -z "$DEPLOY_SSH_MULTI_CALL" ]; then
+    DEPLOY_SSH_MULTI_CALL="no"
+  fi
+  _savedeployconf DEPLOY_SSH_MULTI_CALL "$DEPLOY_SSH_MULTI_CALL"
+
+  # KEYFILE is optional.
+  # If provided then private key will be copied to provided filename.
+  _migratedeployconf Le_Deploy_ssh_keyfile DEPLOY_SSH_KEYFILE
+  _getdeployconf DEPLOY_SSH_KEYFILE
+  _debug2 DEPLOY_SSH_KEYFILE "$DEPLOY_SSH_KEYFILE"
+  if [ -n "$DEPLOY_SSH_KEYFILE" ]; then
+    _savedeployconf DEPLOY_SSH_KEYFILE "$DEPLOY_SSH_KEYFILE"
+  fi
+
+  # CERTFILE is optional.
+  # If provided then certificate will be copied or appended to provided filename.
+  _migratedeployconf Le_Deploy_ssh_certfile DEPLOY_SSH_CERTFILE
+  _getdeployconf DEPLOY_SSH_CERTFILE
+  _debug2 DEPLOY_SSH_CERTFILE "$DEPLOY_SSH_CERTFILE"
+  if [ -n "$DEPLOY_SSH_CERTFILE" ]; then
+    _savedeployconf DEPLOY_SSH_CERTFILE "$DEPLOY_SSH_CERTFILE"
   fi
 
-  _deploy_ssh_servers=$Le_Deploy_ssh_server
-  for Le_Deploy_ssh_server in $_deploy_ssh_servers; do
+  # CAFILE is optional.
+  # If provided then CA intermediate certificate will be copied or appended to provided filename.
+  _migratedeployconf Le_Deploy_ssh_cafile DEPLOY_SSH_CAFILE
+  _getdeployconf DEPLOY_SSH_CAFILE
+  _debug2 DEPLOY_SSH_CAFILE "$DEPLOY_SSH_CAFILE"
+  if [ -n "$DEPLOY_SSH_CAFILE" ]; then
+    _savedeployconf DEPLOY_SSH_CAFILE "$DEPLOY_SSH_CAFILE"
+  fi
+
+  # FULLCHAIN is optional.
+  # If provided then fullchain certificate will be copied or appended to provided filename.
+  _migratedeployconf Le_Deploy_ssh_fullchain DEPLOY_SSH_FULLCHAIN
+  _getdeployconf DEPLOY_SSH_FULLCHAIN
+  _debug2 DEPLOY_SSH_FULLCHAIN "$DEPLOY_SSH_FULLCHAIN"
+  if [ -n "$DEPLOY_SSH_FULLCHAIN" ]; then
+    _savedeployconf DEPLOY_SSH_FULLCHAIN "$DEPLOY_SSH_FULLCHAIN"
+  fi
+
+  # REMOTE_CMD is optional.
+  # If provided then this command will be executed on remote host.
+  _migratedeployconf Le_Deploy_ssh_remote_cmd DEPLOY_SSH_REMOTE_CMD
+  _getdeployconf DEPLOY_SSH_REMOTE_CMD
+  _debug2 DEPLOY_SSH_REMOTE_CMD "$DEPLOY_SSH_REMOTE_CMD"
+  if [ -n "$DEPLOY_SSH_REMOTE_CMD" ]; then
+    _savedeployconf DEPLOY_SSH_REMOTE_CMD "$DEPLOY_SSH_REMOTE_CMD"
+  fi
+
+  # USE_SCP is optional. If not provided then default to previously saved
+  # value (which may be undefined... equivalent to "no").
+  _getdeployconf DEPLOY_SSH_USE_SCP
+  _debug2 DEPLOY_SSH_USE_SCP "$DEPLOY_SSH_USE_SCP"
+  if [ -z "$DEPLOY_SSH_USE_SCP" ]; then
+    DEPLOY_SSH_USE_SCP="no"
+  fi
+  _savedeployconf DEPLOY_SSH_USE_SCP "$DEPLOY_SSH_USE_SCP"
+
+  # SCP_CMD is optional. If not provided then use scp
+  _getdeployconf DEPLOY_SSH_SCP_CMD
+  _debug2 DEPLOY_SSH_SCP_CMD "$DEPLOY_SSH_SCP_CMD"
+  if [ -z "$DEPLOY_SSH_SCP_CMD" ]; then
+    DEPLOY_SSH_SCP_CMD="scp -q"
+  fi
+  _savedeployconf DEPLOY_SSH_SCP_CMD "$DEPLOY_SSH_SCP_CMD"
+
+  if [ "$DEPLOY_SSH_USE_SCP" = "yes" ]; then
+    DEPLOY_SSH_MULTI_CALL="yes"
+    _info "Using scp as alternate method for copying files. Multicall Mode is implicit"
+  elif [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+    _info "Using MULTI_CALL mode... Required commands sent in multiple calls to remote host"
+  else
+    _info "Required commands batched and sent in single call to remote host"
+  fi
+
+  _deploy_ssh_servers="$DEPLOY_SSH_SERVER"
+  for DEPLOY_SSH_SERVER in $_deploy_ssh_servers; do
     _ssh_deploy
   done
 }
@@ -110,16 +181,25 @@ _ssh_deploy() {
   _cmdstr=""
   _backupprefix=""
   _backupdir=""
+  _local_cert_file=""
+  _local_ca_file=""
+  _local_full_file=""
 
-  _info "Deploy certificates to remote server $Le_Deploy_ssh_user@$Le_Deploy_ssh_server"
-  if [ "$Le_Deploy_ssh_multi_call" = "yes" ]; then
-    _info "Using MULTI_CALL mode... Required commands sent in multiple calls to remote host"
-  else
-    _info "Required commands batched and sent in single call to remote host"
-  fi
+  case $DEPLOY_SSH_SERVER in
+  *:*)
+    _host=${DEPLOY_SSH_SERVER%:*}
+    _port=${DEPLOY_SSH_SERVER##*:}
+    ;;
+  *)
+    _host=$DEPLOY_SSH_SERVER
+    _port=
+    ;;
+  esac
+
+  _info "Deploy certificates to remote server $DEPLOY_SSH_USER@$_host:$_port"
 
-  if [ "$Le_Deploy_ssh_backup" = "yes" ]; then
-    _backupprefix="$Le_Deploy_ssh_backup_path/$_cdomain-backup"
+  if [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
+    _backupprefix="$DEPLOY_SSH_BACKUP_PATH/$_cdomain-backup"
     _backupdir="$_backupprefix-$(_utc_date | tr ' ' '-')"
     # run cleanup on the backup directory, erase all older
     # than 180 days (15552000 seconds).
@@ -131,7 +211,7 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
     _cmdstr="mkdir -p $_backupdir; $_cmdstr"
     _info "Backup of old certificate files will be placed in remote directory $_backupdir"
     _info "Backup directories erased after 180 days."
-    if [ "$Le_Deploy_ssh_multi_call" = "yes" ]; then
+    if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
       if ! _ssh_remote_cmd "$_cmdstr"; then
         return $_err_code
       fi
@@ -139,119 +219,184 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
     fi
   fi
 
-  # KEYFILE is optional.
-  # If provided then private key will be copied to provided filename.
   if [ -n "$DEPLOY_SSH_KEYFILE" ]; then
-    Le_Deploy_ssh_keyfile="$DEPLOY_SSH_KEYFILE"
-    _savedomainconf Le_Deploy_ssh_keyfile "$Le_Deploy_ssh_keyfile"
-  fi
-  if [ -n "$Le_Deploy_ssh_keyfile" ]; then
-    if [ "$Le_Deploy_ssh_backup" = "yes" ]; then
+    if [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $Le_Deploy_ssh_keyfile $_backupdir >/dev/null;"
+      _cmdstr="$_cmdstr cp $DEPLOY_SSH_KEYFILE $_backupdir >/dev/null;"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
-    # copy new certificate into file.
-    _cmdstr="$_cmdstr echo \"$(cat "$_ckey")\" > $Le_Deploy_ssh_keyfile;"
-    _info "will copy private key to remote file $Le_Deploy_ssh_keyfile"
-    if [ "$Le_Deploy_ssh_multi_call" = "yes" ]; then
-      if ! _ssh_remote_cmd "$_cmdstr"; then
+
+    # copy new key into file.
+    if [ "$DEPLOY_SSH_USE_SCP" = "yes" ]; then
+      # scp the file
+      if ! _scp_remote_cmd "$_ckey" "$DEPLOY_SSH_KEYFILE"; then
         return $_err_code
       fi
-      _cmdstr=""
+    else
+      # ssh echo to the file
+      _cmdstr="$_cmdstr echo \"$(cat "$_ckey")\" > $DEPLOY_SSH_KEYFILE;"
+      _info "will copy private key to remote file $DEPLOY_SSH_KEYFILE"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
   fi
 
-  # CERTFILE is optional.
-  # If provided then certificate will be copied or appended to provided filename.
   if [ -n "$DEPLOY_SSH_CERTFILE" ]; then
-    Le_Deploy_ssh_certfile="$DEPLOY_SSH_CERTFILE"
-    _savedomainconf Le_Deploy_ssh_certfile "$Le_Deploy_ssh_certfile"
-  fi
-  if [ -n "$Le_Deploy_ssh_certfile" ]; then
     _pipe=">"
-    if [ "$Le_Deploy_ssh_certfile" = "$Le_Deploy_ssh_keyfile" ]; then
+    if [ "$DEPLOY_SSH_CERTFILE" = "$DEPLOY_SSH_KEYFILE" ]; then
       # if filename is same as previous file then append.
       _pipe=">>"
-    elif [ "$Le_Deploy_ssh_backup" = "yes" ]; then
+    elif [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $Le_Deploy_ssh_certfile $_backupdir >/dev/null;"
+      _cmdstr="$_cmdstr cp $DEPLOY_SSH_CERTFILE $_backupdir >/dev/null;"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
+
     # copy new certificate into file.
-    _cmdstr="$_cmdstr echo \"$(cat "$_ccert")\" $_pipe $Le_Deploy_ssh_certfile;"
-    _info "will copy certificate to remote file $Le_Deploy_ssh_certfile"
-    if [ "$Le_Deploy_ssh_multi_call" = "yes" ]; then
-      if ! _ssh_remote_cmd "$_cmdstr"; then
+    if [ "$DEPLOY_SSH_USE_SCP" = "yes" ]; then
+      # scp the file
+      _local_cert_file=$(_mktemp)
+      if [ "$DEPLOY_SSH_CERTFILE" = "$DEPLOY_SSH_KEYFILE" ]; then
+        cat "$_ckey" >>"$_local_cert_file"
+      fi
+      cat "$_ccert" >>"$_local_cert_file"
+      if ! _scp_remote_cmd "$_local_cert_file" "$DEPLOY_SSH_CERTFILE"; then
         return $_err_code
       fi
-      _cmdstr=""
+    else
+      # ssh echo to the file
+      _cmdstr="$_cmdstr echo \"$(cat "$_ccert")\" $_pipe $DEPLOY_SSH_CERTFILE;"
+      _info "will copy certificate to remote file $DEPLOY_SSH_CERTFILE"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
   fi
 
-  # CAFILE is optional.
-  # If provided then CA intermediate certificate will be copied or appended to provided filename.
   if [ -n "$DEPLOY_SSH_CAFILE" ]; then
-    Le_Deploy_ssh_cafile="$DEPLOY_SSH_CAFILE"
-    _savedomainconf Le_Deploy_ssh_cafile "$Le_Deploy_ssh_cafile"
-  fi
-  if [ -n "$Le_Deploy_ssh_cafile" ]; then
     _pipe=">"
-    if [ "$Le_Deploy_ssh_cafile" = "$Le_Deploy_ssh_keyfile" ] ||
-      [ "$Le_Deploy_ssh_cafile" = "$Le_Deploy_ssh_certfile" ]; then
+    if [ "$DEPLOY_SSH_CAFILE" = "$DEPLOY_SSH_KEYFILE" ] ||
+      [ "$DEPLOY_SSH_CAFILE" = "$DEPLOY_SSH_CERTFILE" ]; then
       # if filename is same as previous file then append.
       _pipe=">>"
-    elif [ "$Le_Deploy_ssh_backup" = "yes" ]; then
+    elif [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $Le_Deploy_ssh_cafile $_backupdir >/dev/null;"
+      _cmdstr="$_cmdstr cp $DEPLOY_SSH_CAFILE $_backupdir >/dev/null;"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
+
     # copy new certificate into file.
-    _cmdstr="$_cmdstr echo \"$(cat "$_cca")\" $_pipe $Le_Deploy_ssh_cafile;"
-    _info "will copy CA file to remote file $Le_Deploy_ssh_cafile"
-    if [ "$Le_Deploy_ssh_multi_call" = "yes" ]; then
-      if ! _ssh_remote_cmd "$_cmdstr"; then
+    if [ "$DEPLOY_SSH_USE_SCP" = "yes" ]; then
+      # scp the file
+      _local_ca_file=$(_mktemp)
+      if [ "$DEPLOY_SSH_CAFILE" = "$DEPLOY_SSH_KEYFILE" ]; then
+        cat "$_ckey" >>"$_local_ca_file"
+      fi
+      if [ "$DEPLOY_SSH_CAFILE" = "$DEPLOY_SSH_CERTFILE" ]; then
+        cat "$_ccert" >>"$_local_ca_file"
+      fi
+      cat "$_cca" >>"$_local_ca_file"
+      if ! _scp_remote_cmd "$_local_ca_file" "$DEPLOY_SSH_CAFILE"; then
         return $_err_code
       fi
-      _cmdstr=""
+    else
+      # ssh echo to the file
+      _cmdstr="$_cmdstr echo \"$(cat "$_cca")\" $_pipe $DEPLOY_SSH_CAFILE;"
+      _info "will copy CA file to remote file $DEPLOY_SSH_CAFILE"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
   fi
 
-  # FULLCHAIN is optional.
-  # If provided then fullchain certificate will be copied or appended to provided filename.
   if [ -n "$DEPLOY_SSH_FULLCHAIN" ]; then
-    Le_Deploy_ssh_fullchain="$DEPLOY_SSH_FULLCHAIN"
-    _savedomainconf Le_Deploy_ssh_fullchain "$Le_Deploy_ssh_fullchain"
-  fi
-  if [ -n "$Le_Deploy_ssh_fullchain" ]; then
     _pipe=">"
-    if [ "$Le_Deploy_ssh_fullchain" = "$Le_Deploy_ssh_keyfile" ] ||
-      [ "$Le_Deploy_ssh_fullchain" = "$Le_Deploy_ssh_certfile" ] ||
-      [ "$Le_Deploy_ssh_fullchain" = "$Le_Deploy_ssh_cafile" ]; then
+    if [ "$DEPLOY_SSH_FULLCHAIN" = "$DEPLOY_SSH_KEYFILE" ] ||
+      [ "$DEPLOY_SSH_FULLCHAIN" = "$DEPLOY_SSH_CERTFILE" ] ||
+      [ "$DEPLOY_SSH_FULLCHAIN" = "$DEPLOY_SSH_CAFILE" ]; then
       # if filename is same as previous file then append.
       _pipe=">>"
-    elif [ "$Le_Deploy_ssh_backup" = "yes" ]; then
+    elif [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $Le_Deploy_ssh_fullchain $_backupdir >/dev/null;"
+      _cmdstr="$_cmdstr cp $DEPLOY_SSH_FULLCHAIN $_backupdir >/dev/null;"
+      if [ "$DEPLOY_SSH_FULLCHAIN" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
+
     # copy new certificate into file.
-    _cmdstr="$_cmdstr echo \"$(cat "$_cfullchain")\" $_pipe $Le_Deploy_ssh_fullchain;"
-    _info "will copy fullchain to remote file $Le_Deploy_ssh_fullchain"
-    if [ "$Le_Deploy_ssh_multi_call" = "yes" ]; then
-      if ! _ssh_remote_cmd "$_cmdstr"; then
+    if [ "$DEPLOY_SSH_USE_SCP" = "yes" ]; then
+      # scp the file
+      _local_full_file=$(_mktemp)
+      if [ "$DEPLOY_SSH_FULLCHAIN" = "$DEPLOY_SSH_KEYFILE" ]; then
+        cat "$_ckey" >>"$_local_full_file"
+      fi
+      if [ "$DEPLOY_SSH_FULLCHAIN" = "$DEPLOY_SSH_CERTFILE" ]; then
+        cat "$_ccert" >>"$_local_full_file"
+      fi
+      if [ "$DEPLOY_SSH_FULLCHAIN" = "$DEPLOY_SSH_CAFILE" ]; then
+        cat "$_cca" >>"$_local_full_file"
+      fi
+      cat "$_cfullchain" >>"$_local_full_file"
+      if ! _scp_remote_cmd "$_local_full_file" "$DEPLOY_SSH_FULLCHAIN"; then
         return $_err_code
       fi
-      _cmdstr=""
+    else
+      # ssh echo to the file
+      _cmdstr="$_cmdstr echo \"$(cat "$_cfullchain")\" $_pipe $DEPLOY_SSH_FULLCHAIN;"
+      _info "will copy fullchain to remote file $DEPLOY_SSH_FULLCHAIN"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
+        if ! _ssh_remote_cmd "$_cmdstr"; then
+          return $_err_code
+        fi
+        _cmdstr=""
+      fi
     fi
   fi
 
-  # REMOTE_CMD is optional.
-  # If provided then this command will be executed on remote host.
-  if [ -n "$DEPLOY_SSH_REMOTE_CMD" ]; then
-    Le_Deploy_ssh_remote_cmd="$DEPLOY_SSH_REMOTE_CMD"
-    _savedomainconf Le_Deploy_ssh_remote_cmd "$Le_Deploy_ssh_remote_cmd"
+  # cleanup local files if any
+  if [ -f "$_local_cert_file" ]; then
+    rm -f "$_local_cert_file"
+  fi
+  if [ -f "$_local_ca_file" ]; then
+    rm -f "$_local_ca_file"
   fi
-  if [ -n "$Le_Deploy_ssh_remote_cmd" ]; then
-    _cmdstr="$_cmdstr $Le_Deploy_ssh_remote_cmd;"
-    _info "Will execute remote command $Le_Deploy_ssh_remote_cmd"
-    if [ "$Le_Deploy_ssh_multi_call" = "yes" ]; then
+  if [ -f "$_local_full_file" ]; then
+    rm -f "$_local_full_file"
+  fi
+
+  if [ -n "$DEPLOY_SSH_REMOTE_CMD" ]; then
+    _cmdstr="$_cmdstr $DEPLOY_SSH_REMOTE_CMD;"
+    _info "Will execute remote command $DEPLOY_SSH_REMOTE_CMD"
+    if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
       if ! _ssh_remote_cmd "$_cmdstr"; then
         return $_err_code
       fi
@@ -265,17 +410,25 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
       return $_err_code
     fi
   fi
+  # cleanup in case all is ok
   return 0
 }
 
 #cmd
 _ssh_remote_cmd() {
   _cmd="$1"
+
+  _ssh_cmd="$DEPLOY_SSH_CMD"
+  if [ -n "$_port" ]; then
+    _ssh_cmd="$_ssh_cmd -p $_port"
+  fi
+
   _secure_debug "Remote commands to execute: $_cmd"
-  _info "Submitting sequence of commands to remote server by ssh"
+  _info "Submitting sequence of commands to remote server by $_ssh_cmd"
+
   # quotations in bash cmd below intended.  Squash travis spellcheck error
   # shellcheck disable=SC2029
-  $Le_Deploy_ssh_cmd "$Le_Deploy_ssh_user@$Le_Deploy_ssh_server" sh -c "'$_cmd'"
+  $_ssh_cmd "$DEPLOY_SSH_USER@$_host" sh -c "'$_cmd'"
   _err_code="$?"
 
   if [ "$_err_code" != "0" ]; then
@@ -284,3 +437,26 @@ _ssh_remote_cmd() {
 
   return $_err_code
 }
+
+# cmd scp
+_scp_remote_cmd() {
+  _src=$1
+  _dest=$2
+
+  _scp_cmd="$DEPLOY_SSH_SCP_CMD"
+  if [ -n "$_port" ]; then
+    _scp_cmd="$_scp_cmd -P $_port"
+  fi
+
+  _secure_debug "Remote copy source $_src to destination $_dest"
+  _info "Submitting secure copy by $_scp_cmd"
+
+  $_scp_cmd "$_src" "$DEPLOY_SSH_USER"@"$_host":"$_dest"
+  _err_code="$?"
+
+  if [ "$_err_code" != "0" ]; then
+    _err "Error code $_err_code returned from scp"
+  fi
+
+  return $_err_code
+}

deploy/synology_dsm.sh

@@ -1,33 +1,35 @@
-#!/usr/bin/env sh
-
-# Here is a script to deploy cert to Synology DSM
-#
-# it requires the jq and curl are in the $PATH and the following
-# environment variables must be set:
-#
-# SYNO_Username - Synology Username to login (must be an administrator)
-# SYNO_Password - Synology Password to login
-# SYNO_Certificate - Certificate description to target for replacement
-#
-# The following environmental variables may be set if you don't like their
-# default values:
-#
-# SYNO_Scheme - defaults to http
-# SYNO_Hostname - defaults to localhost
-# SYNO_Port - defaults to 5000
-# SYNO_DID - device ID to skip OTP - defaults to empty
-#
-#returns 0 means success, otherwise error.
-
-########  Public functions #####################
-
-_syno_get_cookie_data() {
-  grep -i "\W$1=" | grep -i "^Set-Cookie:" | _tail_n 1 | _egrep_o "$1=[^;]*;" | tr -d ';'
-}
-
+#!/bin/bash
+
+################################################################################
+# ACME.sh 3rd party deploy plugin for Synology DSM
+################################################################################
+# Authors: Brian Hartvigsen (creator), https://github.com/tresni
+#          Martin Arndt (contributor), https://troublezone.net/
+# Updated: 2023-07-03
+# Issues:  https://github.com/acmesh-official/acme.sh/issues/2727
+################################################################################
+# Usage:
+# 1. export SYNO_Username="adminUser"
+# 2. export SYNO_Password="adminPassword"
+# Optional exports (shown values are the defaults):
+# - export SYNO_Certificate="" to replace a specific certificate via description
+# - export SYNO_Scheme="http"
+# - export SYNO_Hostname="localhost"
+# - export SYNO_Port="5000"
+# - export SYNO_Device_Name="CertRenewal" - required for skipping 2FA-OTP
+# - export SYNO_Device_ID=""              - required for skipping 2FA-OTP
+# 3. acme.sh --deploy --deploy-hook synology_dsm -d example.com
+################################################################################
+# Dependencies:
+# - jq & curl
+################################################################################
+# Return value:
+# 0 means success, otherwise error.
+################################################################################
+
+########## Public functions ####################################################
 #domain keyfile certfile cafile fullchain
 synology_dsm_deploy() {
-
   _cdomain="$1"
   _ckey="$2"
   _ccert="$3"
@@ -35,91 +37,146 @@ synology_dsm_deploy() {
 
   _debug _cdomain "$_cdomain"
 
-  # Get Username and Password, but don't save until we successfully authenticate
+  # Get username & password, but don't save until we authenticated successfully
   _getdeployconf SYNO_Username
   _getdeployconf SYNO_Password
   _getdeployconf SYNO_Create
   _getdeployconf SYNO_DID
+  _getdeployconf SYNO_TOTP_SECRET
+  _getdeployconf SYNO_Device_Name
+  _getdeployconf SYNO_Device_ID
   if [ -z "${SYNO_Username:-}" ] || [ -z "${SYNO_Password:-}" ]; then
     _err "SYNO_Username & SYNO_Password must be set"
     return 1
   fi
+  if [ -n "${SYNO_Device_Name:-}" ] && [ -z "${SYNO_Device_ID:-}" ]; then
+    _err "SYNO_Device_Name set, but SYNO_Device_ID is empty"
+    return 1
+  fi
   _debug2 SYNO_Username "$SYNO_Username"
   _secure_debug2 SYNO_Password "$SYNO_Password"
+  _debug2 SYNO_Create "$SYNO_Create"
+  _debug2 SYNO_Device_Name "$SYNO_Device_Name"
+  _secure_debug2 SYNO_Device_ID "$SYNO_Device_ID"
 
-  # Optional scheme, hostname, and port for Synology DSM
+  # Optional scheme, hostname & port for Synology DSM
   _getdeployconf SYNO_Scheme
   _getdeployconf SYNO_Hostname
   _getdeployconf SYNO_Port
 
-  # default vaules for scheme, hostname, and port
-  # defaulting to localhost and http because it's localhost...
+  # Default values for scheme, hostname & port
+  # Defaulting to localhost & http, because it's localhost…
   [ -n "${SYNO_Scheme}" ] || SYNO_Scheme="http"
   [ -n "${SYNO_Hostname}" ] || SYNO_Hostname="localhost"
   [ -n "${SYNO_Port}" ] || SYNO_Port="5000"
-
   _savedeployconf SYNO_Scheme "$SYNO_Scheme"
   _savedeployconf SYNO_Hostname "$SYNO_Hostname"
   _savedeployconf SYNO_Port "$SYNO_Port"
-
   _debug2 SYNO_Scheme "$SYNO_Scheme"
   _debug2 SYNO_Hostname "$SYNO_Hostname"
   _debug2 SYNO_Port "$SYNO_Port"
 
-  # Get the certificate description, but don't save it until we verfiy it's real
+  # Get the certificate description, but don't save it until we verify it's real
   _getdeployconf SYNO_Certificate
   _debug SYNO_Certificate "${SYNO_Certificate:-}"
 
+  # shellcheck disable=SC1003 # We are not trying to escape a single quote
+  if printf "%s" "$SYNO_Certificate" | grep '\\'; then
+    _err "Do not use a backslash (\) in your certificate description"
+    return 1
+  fi
+
   _base_url="$SYNO_Scheme://$SYNO_Hostname:$SYNO_Port"
   _debug _base_url "$_base_url"
 
-  # Login, get the token from JSON and session id from cookie
+  _debug "Getting API version"
+  response=$(_get "$_base_url/webapi/query.cgi?api=SYNO.API.Info&version=1&method=query&query=SYNO.API.Auth")
+  api_version=$(echo "$response" | grep "SYNO.API.Auth" | sed -n 's/.*"maxVersion" *: *\([0-9]*\).*/\1/p')
+  _debug3 response "$response"
+  _debug3 api_version "$api_version"
+
+  # Login, get the session ID & SynoToken from JSON
   _info "Logging into $SYNO_Hostname:$SYNO_Port"
   encoded_username="$(printf "%s" "$SYNO_Username" | _url_encode)"
   encoded_password="$(printf "%s" "$SYNO_Password" | _url_encode)"
-  encoded_did="$(printf "%s" "$SYNO_DID" | _url_encode)"
-  response=$(_get "$_base_url/webman/login.cgi?username=$encoded_username&passwd=$encoded_password&enable_syno_token=yes&device_id=$encoded_did" 1)
-  token=$(echo "$response" | grep -i "X-SYNO-TOKEN:" | sed -n 's/^X-SYNO-TOKEN: \(.*\)$/\1/pI' | tr -d "\r\n")
-  _debug3 response "$response"
-  _debug token "$token"
 
-  if [ -z "$token" ]; then
-    _err "Unable to authenticate to $SYNO_Hostname:$SYNO_Port using $SYNO_Scheme."
-    _err "Check your username and password."
+  otp_code=""
+  # START - DEPRECATED, only kept for legacy compatibility reasons
+  if [ -n "$SYNO_TOTP_SECRET" ]; then
+    _info "WARNING: Usage of SYNO_TOTP_SECRET is deprecated!"
+    _info "         See synology_dsm.sh script or ACME.sh Wiki page for details:"
+    _info "         https://github.com/acmesh-official/acme.sh/wiki/Synology-NAS-Guide"
+    DEPRECATED_otp_code=""
+    if _exists oathtool; then
+      DEPRECATED_otp_code="$(oathtool --base32 --totp "${SYNO_TOTP_SECRET}" 2>/dev/null)"
+    else
+      _err "oathtool could not be found, install oathtool to use SYNO_TOTP_SECRET"
+      return 1
+    fi
+
+    if [ -n "$SYNO_DID" ]; then
+      _H1="Cookie: did=$SYNO_DID"
+      export _H1
+      _debug3 H1 "${_H1}"
+    fi
+
+    response=$(_post "method=login&account=$encoded_username&passwd=$encoded_password&api=SYNO.API.Auth&version=$api_version&enable_syno_token=yes&otp_code=$DEPRECATED_otp_code&device_name=certrenewal&device_id=$SYNO_DID" "$_base_url/webapi/auth.cgi?enable_syno_token=yes")
+    _debug3 response "$response"
+  # END - DEPRECATED, only kept for legacy compatibility reasons
+  # Get device ID if still empty first, otherwise log in right away
+  elif [ -z "${SYNO_Device_ID:-}" ]; then
+    printf "Enter OTP code for user '%s': " "$SYNO_Username"
+    read -r otp_code
+    if [ -z "${SYNO_Device_Name:-}" ]; then
+      printf "Enter device name or leave empty for default (CertRenewal): "
+      read -r SYNO_Device_Name
+      [ -n "${SYNO_Device_Name}" ] || SYNO_Device_Name="CertRenewal"
+    fi
+
+    response=$(_get "$_base_url/webapi/entry.cgi?api=SYNO.API.Auth&version=$api_version&method=login&format=sid&account=$encoded_username&passwd=$encoded_password&otp_code=$otp_code&enable_syno_token=yes&enable_device_token=yes&device_name=$SYNO_Device_Name")
+    _debug3 response "$response"
+    SYNO_Device_ID=$(echo "$response" | grep "device_id" | sed -n 's/.*"device_id" *: *"\([^"]*\).*/\1/p')
+    _secure_debug2 SYNO_Device_ID "$SYNO_Device_ID"
+  else
+    response=$(_get "$_base_url/webapi/entry.cgi?api=SYNO.API.Auth&version=$api_version&method=login&format=sid&account=$encoded_username&passwd=$encoded_password&enable_syno_token=yes&device_name=$SYNO_Device_Name&device_id=$SYNO_Device_ID")
+    _debug3 response "$response"
+  fi
+
+  sid=$(echo "$response" | grep "sid" | sed -n 's/.*"sid" *: *"\([^"]*\).*/\1/p')
+  token=$(echo "$response" | grep "synotoken" | sed -n 's/.*"synotoken" *: *"\([^"]*\).*/\1/p')
+  _debug "Session ID" "$sid"
+  _debug SynoToken "$token"
+  if [ -z "$SYNO_DID" ] && [ -z "$SYNO_Device_ID" ] || [ -z "$sid" ] || [ -z "$token" ]; then
+    _err "Unable to authenticate to $_base_url - check your username & password."
+    _err "If two-factor authentication is enabled for the user, set SYNO_Device_ID."
     return 1
   fi
 
-  _H1="Cookie: $(echo "$response" | _syno_get_cookie_data "id"); $(echo "$response" | _syno_get_cookie_data "smid")"
-  _H2="X-SYNO-TOKEN: $token"
+  _H1="X-SYNO-TOKEN: $token"
   export _H1
-  export _H2
   _debug2 H1 "${_H1}"
-  _debug2 H2 "${_H2}"
 
-  # Now that we know the username and password are good, save them
+  # Now that we know the username & password are good, save them
   _savedeployconf SYNO_Username "$SYNO_Username"
   _savedeployconf SYNO_Password "$SYNO_Password"
-  _savedeployconf SYNO_DID "$SYNO_DID"
+  _savedeployconf SYNO_Device_Name "$SYNO_Device_Name"
+  _savedeployconf SYNO_Device_ID "$SYNO_Device_ID"
 
   _info "Getting certificates in Synology DSM"
-  response=$(_post "api=SYNO.Core.Certificate.CRT&method=list&version=1" "$_base_url/webapi/entry.cgi")
+  response=$(_post "api=SYNO.Core.Certificate.CRT&method=list&version=1&_sid=$sid" "$_base_url/webapi/entry.cgi")
   _debug3 response "$response"
-  id=$(echo "$response" | sed -n "s/.*\"desc\":\"$SYNO_Certificate\",\"id\":\"\([^\"]*\).*/\1/p")
+  escaped_certificate="$(printf "%s" "$SYNO_Certificate" | sed 's/\([].*^$[]\)/\\\1/g;s/"/\\\\"/g')"
+  _debug escaped_certificate "$escaped_certificate"
+  id=$(echo "$response" | sed -n "s/.*\"desc\":\"$escaped_certificate\",\"id\":\"\([^\"]*\).*/\1/p")
   _debug2 id "$id"
 
   if [ -z "$id" ] && [ -z "${SYNO_Create:-}" ]; then
-    _err "Unable to find certificate: $SYNO_Certificate and \$SYNO_Create is not set"
+    _err "Unable to find certificate: $SYNO_Certificate & \$SYNO_Create is not set"
     return 1
   fi
 
-  # we've verified this certificate description is a thing, so save it
-  _savedeployconf SYNO_Certificate "$SYNO_Certificate"
-
-  default=false
-  if echo "$response" | sed -n "s/.*\"desc\":\"$SYNO_Certificate\",\([^{]*\).*/\1/p" | grep -- 'is_default":true' >/dev/null; then
-    default=true
-  fi
-  _debug2 default "$default"
+  # We've verified this certificate description is a thing, so save it
+  _savedeployconf SYNO_Certificate "$SYNO_Certificate" "base64"
 
   _info "Generate form POST request"
   nl="\0015\0012"
@@ -129,24 +186,39 @@ synology_dsm_deploy() {
   content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"inter_cert\"; filename=\"$(basename "$_cca")\"${nl}Content-Type: application/octet-stream${nl}${nl}$(cat "$_cca")\0012"
   content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"id\"${nl}${nl}$id"
   content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"desc\"${nl}${nl}${SYNO_Certificate}"
-  content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"as_default\"${nl}${nl}${default}"
+  if echo "$response" | sed -n "s/.*\"desc\":\"$escaped_certificate\",\([^{]*\).*/\1/p" | grep -- 'is_default":true' >/dev/null; then
+    _debug2 default "This is the default certificate"
+    content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"as_default\"${nl}${nl}true"
+  else
+    _debug2 default "This is NOT the default certificate"
+  fi
   content="$content${nl}--$delim--${nl}"
   content="$(printf "%b_" "$content")"
   content="${content%_}" # protect trailing \n
 
   _info "Upload certificate to the Synology DSM"
-  response=$(_post "$content" "$_base_url/webapi/entry.cgi?api=SYNO.Core.Certificate&method=import&version=1&SynoToken=$token" "" "POST" "multipart/form-data; boundary=${delim}")
+  response=$(_post "$content" "$_base_url/webapi/entry.cgi?api=SYNO.Core.Certificate&method=import&version=1&SynoToken=$token&_sid=$sid" "" "POST" "multipart/form-data; boundary=${delim}")
   _debug3 response "$response"
 
   if ! echo "$response" | grep '"error":' >/dev/null; then
     if echo "$response" | grep '"restart_httpd":true' >/dev/null; then
-      _info "http services were restarted"
+      _info "Restarting HTTP services succeeded"
     else
-      _info "http services were NOT restarted"
+      _info "Restarting HTTP services failed"
     fi
+
+    _logout
     return 0
   else
     _err "Unable to update certificate, error code $response"
+    _logout
     return 1
   fi
 }
+
+####################  Private functions below ##################################
+_logout() {
+  # Logout to not occupy a permanent session, e.g. in DSM's "Connected Users" widget
+  response=$(_get "$_base_url/webapi/entry.cgi?api=SYNO.API.Auth&version=$api_version&method=logout")
+  _debug3 response "$response"
+}

deploy/truenas.sh

@@ -0,0 +1,223 @@
+#!/usr/bin/env sh
+
+# Here is a scipt to deploy the cert to your TrueNAS using the REST API.
+# https://www.truenas.com/docs/hub/additional-topics/api/rest_api.html
+#
+# Written by Frank Plass [email protected]
+# https://github.com/danb35/deploy-freenas/blob/master/deploy_freenas.py
+# Thanks to danb35 for your template!
+#
+# Following environment variables must be set:
+#
+# export DEPLOY_TRUENAS_APIKEY="<API_KEY_GENERATED_IN_THE_WEB_UI"
+#
+# The following environmental variables may be set if you don't like their
+# default values:
+#
+# DEPLOY_TRUENAS_HOSTNAME - defaults to localhost
+# DEPLOY_TRUENAS_SCHEME - defaults to http, set alternatively to https
+#
+#returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+truenas_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  _getdeployconf DEPLOY_TRUENAS_APIKEY
+
+  if [ -z "$DEPLOY_TRUENAS_APIKEY" ]; then
+    _err "TrueNAS API key not found, please set the DEPLOY_TRUENAS_APIKEY environment variable."
+    return 1
+  fi
+  _secure_debug2 DEPLOY_TRUENAS_APIKEY "$DEPLOY_TRUENAS_APIKEY"
+
+  # Optional hostname, scheme for TrueNAS
+  _getdeployconf DEPLOY_TRUENAS_HOSTNAME
+  _getdeployconf DEPLOY_TRUENAS_SCHEME
+
+  # default values for hostname and scheme
+  [ -n "${DEPLOY_TRUENAS_HOSTNAME}" ] || DEPLOY_TRUENAS_HOSTNAME="localhost"
+  [ -n "${DEPLOY_TRUENAS_SCHEME}" ] || DEPLOY_TRUENAS_SCHEME="http"
+
+  _debug2 DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
+  _debug2 DEPLOY_TRUENAS_SCHEME "$DEPLOY_TRUENAS_SCHEME"
+
+  _api_url="$DEPLOY_TRUENAS_SCHEME://$DEPLOY_TRUENAS_HOSTNAME/api/v2.0"
+  _debug _api_url "$_api_url"
+
+  _H1="Authorization: Bearer $DEPLOY_TRUENAS_APIKEY"
+  _secure_debug3 _H1 "$_H1"
+
+  _info "Testing Connection TrueNAS"
+  _response=$(_get "$_api_url/system/state")
+  _info "TrueNAS system state: $_response."
+
+  if [ -z "$_response" ]; then
+    _err "Unable to authenticate to $_api_url."
+    _err 'Check your connection settings are correct, e.g.'
+    _err 'DEPLOY_TRUENAS_HOSTNAME="192.168.x.y" or DEPLOY_TRUENAS_HOSTNAME="truenas.example.com".'
+    _err 'DEPLOY_TRUENAS_SCHEME="https" or DEPLOY_TRUENAS_SCHEME="http".'
+    _err "Verify your TrueNAS API key is valid and set correctly, e.g. DEPLOY_TRUENAS_APIKEY=xxxx...."
+    return 1
+  fi
+
+  _savedeployconf DEPLOY_TRUENAS_APIKEY "$DEPLOY_TRUENAS_APIKEY"
+  _savedeployconf DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
+  _savedeployconf DEPLOY_TRUENAS_SCHEME "$DEPLOY_TRUENAS_SCHEME"
+
+  _info "Getting current active certificate from TrueNAS"
+  _response=$(_get "$_api_url/system/general")
+  _active_cert_id=$(echo "$_response" | grep -B2 '"name":' | grep 'id' | tr -d -- '"id: ,')
+  _active_cert_name=$(echo "$_response" | grep '"name":' | sed -n 's/.*: "\(.\{1,\}\)",$/\1/p')
+  _param_httpsredirect=$(echo "$_response" | grep '"ui_httpsredirect":' | sed -n 's/.*": \(.\{1,\}\),$/\1/p')
+  _debug Active_UI_Certificate_ID "$_active_cert_id"
+  _debug Active_UI_Certificate_Name "$_active_cert_name"
+  _debug Active_UI_http_redirect "$_param_httpsredirect"
+
+  if [ "$DEPLOY_TRUENAS_SCHEME" = "http" ] && [ "$_param_httpsredirect" = "true" ]; then
+    _info "HTTP->HTTPS redirection is enabled"
+    _info "Setting DEPLOY_TRUENAS_SCHEME to 'https'"
+    DEPLOY_TRUENAS_SCHEME="https"
+    _api_url="$DEPLOY_TRUENAS_SCHEME://$DEPLOY_TRUENAS_HOSTNAME/api/v2.0"
+    _savedeployconf DEPLOY_TRUENAS_SCHEME "$DEPLOY_TRUENAS_SCHEME"
+  fi
+
+  _info "Uploading new certificate to TrueNAS"
+  _certname="Letsencrypt_$(_utc_date | tr ' ' '_' | tr -d -- ':')"
+  _debug3 _certname "$_certname"
+
+  _certData="{\"create_type\": \"CERTIFICATE_CREATE_IMPORTED\", \"name\": \"${_certname}\", \"certificate\": \"$(_json_encode <"$_cfullchain")\", \"privatekey\": \"$(_json_encode <"$_ckey")\"}"
+  _add_cert_result="$(_post "$_certData" "$_api_url/certificate" "" "POST" "application/json")"
+
+  _debug3 _add_cert_result "$_add_cert_result"
+
+  _info "Fetching list of installed certificates"
+  _cert_list=$(_get "$_api_url/system/general/ui_certificate_choices")
+  _cert_id=$(echo "$_cert_list" | grep "$_certname" | sed -n 's/.*"\([0-9]\{1,\}\)".*$/\1/p')
+
+  _debug3 _cert_id "$_cert_id"
+
+  _info "Current activate certificate ID: $_cert_id"
+  _activateData="{\"ui_certificate\": \"${_cert_id}\"}"
+  _activate_result="$(_post "$_activateData" "$_api_url/system/general" "" "PUT" "application/json")"
+
+  _debug3 _activate_result "$_activate_result"
+
+  _info "Checking if WebDAV certificate is the same as the TrueNAS web UI"
+  _webdav_list=$(_get "$_api_url/webdav")
+  _webdav_cert_id=$(echo "$_webdav_list" | grep '"certssl":' | tr -d -- '"certsl: ,')
+
+  if [ "$_webdav_cert_id" = "$_active_cert_id" ]; then
+    _info "Updating the WebDAV certificate"
+    _debug _webdav_cert_id "$_webdav_cert_id"
+    _webdav_data="{\"certssl\": \"${_cert_id}\"}"
+    _activate_webdav_cert="$(_post "$_webdav_data" "$_api_url/webdav" "" "PUT" "application/json")"
+    _webdav_new_cert_id=$(echo "$_activate_webdav_cert" | _json_decode | grep '"certssl":' | sed -n 's/.*: \([0-9]\{1,\}\),\{0,1\}$/\1/p')
+    if [ "$_webdav_new_cert_id" -eq "$_cert_id" ]; then
+      _info "WebDAV certificate updated successfully"
+    else
+      _err "Unable to set WebDAV certificate"
+      _debug3 _activate_webdav_cert "$_activate_webdav_cert"
+      _debug3 _webdav_new_cert_id "$_webdav_new_cert_id"
+      return 1
+    fi
+    _debug3 _webdav_new_cert_id "$_webdav_new_cert_id"
+  else
+    _info "WebDAV certificate is not configured or is not the same as TrueNAS web UI"
+  fi
+
+  _info "Checking if FTP certificate is the same as the TrueNAS web UI"
+  _ftp_list=$(_get "$_api_url/ftp")
+  _ftp_cert_id=$(echo "$_ftp_list" | grep '"ssltls_certificate":' | tr -d -- '"certislfa:_ ,')
+
+  if [ "$_ftp_cert_id" = "$_active_cert_id" ]; then
+    _info "Updating the FTP certificate"
+    _debug _ftp_cert_id "$_ftp_cert_id"
+    _ftp_data="{\"ssltls_certificate\": \"${_cert_id}\"}"
+    _activate_ftp_cert="$(_post "$_ftp_data" "$_api_url/ftp" "" "PUT" "application/json")"
+    _ftp_new_cert_id=$(echo "$_activate_ftp_cert" | _json_decode | grep '"ssltls_certificate":' | sed -n 's/.*: \([0-9]\{1,\}\),\{0,1\}$/\1/p')
+    if [ "$_ftp_new_cert_id" -eq "$_cert_id" ]; then
+      _info "FTP certificate updated successfully"
+    else
+      _err "Unable to set FTP certificate"
+      _debug3 _activate_ftp_cert "$_activate_ftp_cert"
+      _debug3 _ftp_new_cert_id "$_ftp_new_cert_id"
+      return 1
+    fi
+    _debug3 _activate_ftp_cert "$_activate_ftp_cert"
+  else
+    _info "FTP certificate is not configured or is not the same as TrueNAS web UI"
+  fi
+
+  _info "Checking if S3 certificate is the same as the TrueNAS web UI"
+  _s3_list=$(_get "$_api_url/s3")
+  _s3_cert_id=$(echo "$_s3_list" | grep '"certificate":' | tr -d -- '"certifa:_ ,')
+
+  if [ "$_s3_cert_id" = "$_active_cert_id" ]; then
+    _info "Updating the S3 certificate"
+    _debug _s3_cert_id "$_s3_cert_id"
+    _s3_data="{\"certificate\": \"${_cert_id}\"}"
+    _activate_s3_cert="$(_post "$_s3_data" "$_api_url/s3" "" "PUT" "application/json")"
+    _s3_new_cert_id=$(echo "$_activate_s3_cert" | _json_decode | grep '"certificate":' | sed -n 's/.*: \([0-9]\{1,\}\),\{0,1\}$/\1/p')
+    if [ "$_s3_new_cert_id" -eq "$_cert_id" ]; then
+      _info "S3 certificate updated successfully"
+    else
+      _err "Unable to set S3 certificate"
+      _debug3 _activate_s3_cert "$_activate_s3_cert"
+      _debug3 _s3_new_cert_id "$_s3_new_cert_id"
+      return 1
+    fi
+    _debug3 _activate_s3_cert "$_activate_s3_cert"
+  else
+    _info "S3 certificate is not configured or is not the same as TrueNAS web UI"
+  fi
+
+  _info "Checking if any chart release Apps is using the same certificate as TrueNAS web UI. Tool 'jq' is required"
+  if _exists jq; then
+    _info "Query all chart release"
+    _release_list=$(_get "$_api_url/chart/release")
+    _related_name_list=$(printf "%s" "$_release_list" | jq -r "[.[] | {name,certId: .config.ingress?.main.tls[]?.scaleCert} | select(.certId==$_active_cert_id) | .name ] | unique")
+    _release_length=$(printf "%s" "$_related_name_list" | jq -r "length")
+    _info "Found $_release_length related chart release in list: $_related_name_list"
+    for i in $(seq 0 $((_release_length - 1))); do
+      _release_name=$(echo "$_related_name_list" | jq -r ".[$i]")
+      _info "Updating certificate from $_active_cert_id to $_cert_id for chart release: $_release_name"
+      #Read the chart release configuration
+      _chart_config=$(printf "%s" "$_release_list" | jq -r ".[] | select(.name==\"$_release_name\")")
+      #Replace the old certificate id with the new one in path .config.ingress.main.tls[].scaleCert. Then update .config.ingress
+      _updated_chart_config=$(printf "%s" "$_chart_config" | jq "(.config.ingress?.main.tls[]? | select(.scaleCert==$_active_cert_id) | .scaleCert  ) |= $_cert_id | .config.ingress ")
+      _update_chart_result="$(_post "{\"values\" : { \"ingress\" : $_updated_chart_config } }" "$_api_url/chart/release/id/$_release_name" "" "PUT" "application/json")"
+      _debug3 _update_chart_result "$_update_chart_result"
+    done
+  else
+    _info "Tool 'jq' does not exists, skip chart release checking"
+  fi
+
+  _info "Deleting old certificate"
+  _delete_result="$(_post "" "$_api_url/certificate/id/$_active_cert_id" "" "DELETE" "application/json")"
+
+  _debug3 _delete_result "$_delete_result"
+
+  _info "Reloading TrueNAS web UI"
+  _restart_UI=$(_get "$_api_url/system/general/ui_restart")
+  _debug2 _restart_UI "$_restart_UI"
+
+  if [ -n "$_add_cert_result" ] && [ -n "$_activate_result" ]; then
+    return 0
+  else
+    _err "Certificate update was not succesful, please try again with --debug"
+    return 1
+  fi
+}

deploy/unifi.sh

@@ -1,12 +1,43 @@
 #!/usr/bin/env sh
 
-#Here is a script to deploy cert to unifi server.
+# Here is a script to deploy cert on a Unifi Controller or Cloud Key device.
+# It supports:
+#   - self-hosted Unifi Controller
+#   - Unifi Cloud Key (Gen1/2/2+)
+#   - Unifi Cloud Key running UnifiOS (v2.0.0+, Gen2/2+ only)
+# Please report bugs to https://github.com/acmesh-official/acme.sh/issues/3359
 
 #returns 0 means success, otherwise error.
 
+# The deploy-hook automatically detects standard Unifi installations
+# for each of the supported environments. Most users should not need
+# to set any of these variables, but if you are running a self-hosted
+# Controller with custom locations, set these as necessary before running
+# the deploy hook. (Defaults shown below.)
+#
+# Settings for Unifi Controller:
+# Location of Java keystore or unifi.keystore.jks file:
 #DEPLOY_UNIFI_KEYSTORE="/usr/lib/unifi/data/keystore"
+# Keystore password (built into Unifi Controller, not a user-set password):
 #DEPLOY_UNIFI_KEYPASS="aircontrolenterprise"
+# Command to restart Unifi Controller:
 #DEPLOY_UNIFI_RELOAD="service unifi restart"
+#
+# Settings for Unifi Cloud Key Gen1 (nginx admin pages):
+# Directory where cloudkey.crt and cloudkey.key live:
+#DEPLOY_UNIFI_CLOUDKEY_CERTDIR="/etc/ssl/private"
+# Command to restart maintenance pages and Controller
+# (same setting as above, default is updated when running on Cloud Key Gen1):
+#DEPLOY_UNIFI_RELOAD="service nginx restart && service unifi restart"
+#
+# Settings for UnifiOS (Cloud Key Gen2):
+# Directory where unifi-core.crt and unifi-core.key live:
+#DEPLOY_UNIFI_CORE_CONFIG="/data/unifi-core/config/"
+# Command to restart unifi-core:
+#DEPLOY_UNIFI_RELOAD="systemctl restart unifi-core"
+#
+# At least one of DEPLOY_UNIFI_KEYSTORE, DEPLOY_UNIFI_CLOUDKEY_CERTDIR,
+# or DEPLOY_UNIFI_CORE_CONFIG must exist to receive the deployed certs.
 
 ########  Public functions #####################
 
@@ -24,77 +55,160 @@ unifi_deploy() {
   _debug _cca "$_cca"
   _debug _cfullchain "$_cfullchain"
 
-  if ! _exists keytool; then
-    _err "keytool not found"
-    return 1
-  fi
+  _getdeployconf DEPLOY_UNIFI_KEYSTORE
+  _getdeployconf DEPLOY_UNIFI_KEYPASS
+  _getdeployconf DEPLOY_UNIFI_CLOUDKEY_CERTDIR
+  _getdeployconf DEPLOY_UNIFI_CORE_CONFIG
+  _getdeployconf DEPLOY_UNIFI_RELOAD
+
+  _debug2 DEPLOY_UNIFI_KEYSTORE "$DEPLOY_UNIFI_KEYSTORE"
+  _debug2 DEPLOY_UNIFI_KEYPASS "$DEPLOY_UNIFI_KEYPASS"
+  _debug2 DEPLOY_UNIFI_CLOUDKEY_CERTDIR "$DEPLOY_UNIFI_CLOUDKEY_CERTDIR"
+  _debug2 DEPLOY_UNIFI_CORE_CONFIG "$DEPLOY_UNIFI_CORE_CONFIG"
+  _debug2 DEPLOY_UNIFI_RELOAD "$DEPLOY_UNIFI_RELOAD"
+
+  # Space-separated list of environments detected and installed:
+  _services_updated=""
+
+  # Default reload commands accumulated as we auto-detect environments:
+  _reload_cmd=""
+
+  # Unifi Controller environment (self hosted or any Cloud Key) --
+  # auto-detect by file /usr/lib/unifi/data/keystore:
+  _unifi_keystore="${DEPLOY_UNIFI_KEYSTORE:-/usr/lib/unifi/data/keystore}"
+  if [ -f "$_unifi_keystore" ]; then
+    _info "Installing certificate for Unifi Controller (Java keystore)"
+    _debug _unifi_keystore "$_unifi_keystore"
+    if ! _exists keytool; then
+      _err "keytool not found"
+      return 1
+    fi
+    if [ ! -w "$_unifi_keystore" ]; then
+      _err "The file $_unifi_keystore is not writable, please change the permission."
+      return 1
+    fi
+
+    _unifi_keypass="${DEPLOY_UNIFI_KEYPASS:-aircontrolenterprise}"
 
-  DEFAULT_UNIFI_KEYSTORE="/usr/lib/unifi/data/keystore"
-  _unifi_keystore="${DEPLOY_UNIFI_KEYSTORE:-$DEFAULT_UNIFI_KEYSTORE}"
-  DEFAULT_UNIFI_KEYPASS="aircontrolenterprise"
-  _unifi_keypass="${DEPLOY_UNIFI_KEYPASS:-$DEFAULT_UNIFI_KEYPASS}"
-  DEFAULT_UNIFI_RELOAD="service unifi restart"
-  _reload="${DEPLOY_UNIFI_RELOAD:-$DEFAULT_UNIFI_RELOAD}"
-
-  _debug _unifi_keystore "$_unifi_keystore"
-  if [ ! -f "$_unifi_keystore" ]; then
-    if [ -z "$DEPLOY_UNIFI_KEYSTORE" ]; then
-      _err "unifi keystore is not found, please define DEPLOY_UNIFI_KEYSTORE"
+    _debug "Generate import pkcs12"
+    _import_pkcs12="$(_mktemp)"
+    _toPkcs "$_import_pkcs12" "$_ckey" "$_ccert" "$_cca" "$_unifi_keypass" unifi root
+    # shellcheck disable=SC2181
+    if [ "$?" != "0" ]; then
+      _err "Error generating pkcs12. Please re-run with --debug and report a bug."
       return 1
+    fi
+
+    _debug "Import into keystore: $_unifi_keystore"
+    if keytool -importkeystore \
+      -deststorepass "$_unifi_keypass" -destkeypass "$_unifi_keypass" -destkeystore "$_unifi_keystore" \
+      -srckeystore "$_import_pkcs12" -srcstoretype PKCS12 -srcstorepass "$_unifi_keypass" \
+      -alias unifi -noprompt; then
+      _debug "Import keystore success!"
+      rm "$_import_pkcs12"
     else
-      _err "It seems that the specified unifi keystore is not valid, please check."
+      _err "Error importing into Unifi Java keystore."
+      _err "Please re-run with --debug and report a bug."
+      rm "$_import_pkcs12"
       return 1
     fi
+
+    if systemctl -q is-active unifi; then
+      _reload_cmd="${_reload_cmd:+$_reload_cmd && }service unifi restart"
+    fi
+    _services_updated="${_services_updated} unifi"
+    _info "Install Unifi Controller certificate success!"
+  elif [ "$DEPLOY_UNIFI_KEYSTORE" ]; then
+    _err "The specified DEPLOY_UNIFI_KEYSTORE='$DEPLOY_UNIFI_KEYSTORE' is not valid, please check."
+    return 1
   fi
-  if [ ! -w "$_unifi_keystore" ]; then
-    _err "The file $_unifi_keystore is not writable, please change the permission."
+
+  # Cloud Key environment (non-UnifiOS -- nginx serves admin pages) --
+  # auto-detect by file /etc/ssl/private/cloudkey.key:
+  _cloudkey_certdir="${DEPLOY_UNIFI_CLOUDKEY_CERTDIR:-/etc/ssl/private}"
+  if [ -f "${_cloudkey_certdir}/cloudkey.key" ]; then
+    _info "Installing certificate for Cloud Key Gen1 (nginx admin pages)"
+    _debug _cloudkey_certdir "$_cloudkey_certdir"
+    if [ ! -w "$_cloudkey_certdir" ]; then
+      _err "The directory $_cloudkey_certdir is not writable; please check permissions."
+      return 1
+    fi
+    # Cloud Key expects to load the keystore from /etc/ssl/private/unifi.keystore.jks.
+    # Normally /usr/lib/unifi/data/keystore is a symlink there (so the keystore was
+    # updated above), but if not, we don't know how to handle this installation:
+    if ! cmp -s "$_unifi_keystore" "${_cloudkey_certdir}/unifi.keystore.jks"; then
+      _err "Unsupported Cloud Key configuration: keystore not found at '${_cloudkey_certdir}/unifi.keystore.jks'"
+      return 1
+    fi
+
+    cat "$_cfullchain" >"${_cloudkey_certdir}/cloudkey.crt"
+    cat "$_ckey" >"${_cloudkey_certdir}/cloudkey.key"
+    (cd "$_cloudkey_certdir" && tar -cf cert.tar cloudkey.crt cloudkey.key unifi.keystore.jks)
+
+    if systemctl -q is-active nginx; then
+      _reload_cmd="${_reload_cmd:+$_reload_cmd && }service nginx restart"
+    fi
+    _info "Install Cloud Key Gen1 certificate success!"
+    _services_updated="${_services_updated} nginx"
+  elif [ "$DEPLOY_UNIFI_CLOUDKEY_CERTDIR" ]; then
+    _err "The specified DEPLOY_UNIFI_CLOUDKEY_CERTDIR='$DEPLOY_UNIFI_CLOUDKEY_CERTDIR' is not valid, please check."
     return 1
   fi
 
-  _info "Generate import pkcs12"
-  _import_pkcs12="$(_mktemp)"
-  _toPkcs "$_import_pkcs12" "$_ckey" "$_ccert" "$_cca" "$_unifi_keypass" unifi root
-  if [ "$?" != "0" ]; then
-    _err "Oops, error creating import pkcs12, please report bug to us."
+  # UnifiOS environment -- auto-detect by /data/unifi-core/config/unifi-core.key:
+  _unifi_core_config="${DEPLOY_UNIFI_CORE_CONFIG:-/data/unifi-core/config}"
+  if [ -f "${_unifi_core_config}/unifi-core.key" ]; then
+    _info "Installing certificate for UnifiOS"
+    _debug _unifi_core_config "$_unifi_core_config"
+    if [ ! -w "$_unifi_core_config" ]; then
+      _err "The directory $_unifi_core_config is not writable; please check permissions."
+      return 1
+    fi
+
+    cat "$_cfullchain" >"${_unifi_core_config}/unifi-core.crt"
+    cat "$_ckey" >"${_unifi_core_config}/unifi-core.key"
+
+    if systemctl -q is-active unifi-core; then
+      _reload_cmd="${_reload_cmd:+$_reload_cmd && }systemctl restart unifi-core"
+    fi
+    _info "Install UnifiOS certificate success!"
+    _services_updated="${_services_updated} unifi-core"
+  elif [ "$DEPLOY_UNIFI_CORE_CONFIG" ]; then
+    _err "The specified DEPLOY_UNIFI_CORE_CONFIG='$DEPLOY_UNIFI_CORE_CONFIG' is not valid, please check."
     return 1
   fi
 
-  _info "Modify unifi keystore: $_unifi_keystore"
-  if keytool -importkeystore \
-    -deststorepass "$_unifi_keypass" -destkeypass "$_unifi_keypass" -destkeystore "$_unifi_keystore" \
-    -srckeystore "$_import_pkcs12" -srcstoretype PKCS12 -srcstorepass "$_unifi_keypass" \
-    -alias unifi -noprompt; then
-    _info "Import keystore success!"
-    rm "$_import_pkcs12"
-  else
-    _err "Import unifi keystore error, please report bug to us."
-    rm "$_import_pkcs12"
+  if [ -z "$_services_updated" ]; then
+    # None of the Unifi environments were auto-detected, so no deployment has occurred
+    # (and none of DEPLOY_UNIFI_{KEYSTORE,CLOUDKEY_CERTDIR,CORE_CONFIG} were set).
+    _err "Unable to detect Unifi environment in standard location."
+    _err "(This deploy hook must be run on the Unifi device, not a remote machine.)"
+    _err "For non-standard Unifi installations, set DEPLOY_UNIFI_KEYSTORE,"
+    _err "DEPLOY_UNIFI_CLOUDKEY_CERTDIR, and/or DEPLOY_UNIFI_CORE_CONFIG as appropriate."
     return 1
   fi
 
-  _info "Run reload: $_reload"
-  if eval "$_reload"; then
+  _reload_cmd="${DEPLOY_UNIFI_RELOAD:-$_reload_cmd}"
+  if [ -z "$_reload_cmd" ]; then
+    _err "Certificates were installed for services:${_services_updated},"
+    _err "but none appear to be active. Please set DEPLOY_UNIFI_RELOAD"
+    _err "to a command that will restart the necessary services."
+    return 1
+  fi
+  _info "Reload services (this may take some time): $_reload_cmd"
+  if eval "$_reload_cmd"; then
     _info "Reload success!"
-    if [ "$DEPLOY_UNIFI_KEYSTORE" ]; then
-      _savedomainconf DEPLOY_UNIFI_KEYSTORE "$DEPLOY_UNIFI_KEYSTORE"
-    else
-      _cleardomainconf DEPLOY_UNIFI_KEYSTORE
-    fi
-    if [ "$DEPLOY_UNIFI_KEYPASS" ]; then
-      _savedomainconf DEPLOY_UNIFI_KEYPASS "$DEPLOY_UNIFI_KEYPASS"
-    else
-      _cleardomainconf DEPLOY_UNIFI_KEYPASS
-    fi
-    if [ "$DEPLOY_UNIFI_RELOAD" ]; then
-      _savedomainconf DEPLOY_UNIFI_RELOAD "$DEPLOY_UNIFI_RELOAD"
-    else
-      _cleardomainconf DEPLOY_UNIFI_RELOAD
-    fi
-    return 0
   else
     _err "Reload error"
     return 1
   fi
-  return 0
 
+  # Successful, so save all (non-default) config:
+  _savedeployconf DEPLOY_UNIFI_KEYSTORE "$DEPLOY_UNIFI_KEYSTORE"
+  _savedeployconf DEPLOY_UNIFI_KEYPASS "$DEPLOY_UNIFI_KEYPASS"
+  _savedeployconf DEPLOY_UNIFI_CLOUDKEY_CERTDIR "$DEPLOY_UNIFI_CLOUDKEY_CERTDIR"
+  _savedeployconf DEPLOY_UNIFI_CORE_CONFIG "$DEPLOY_UNIFI_CORE_CONFIG"
+  _savedeployconf DEPLOY_UNIFI_RELOAD "$DEPLOY_UNIFI_RELOAD"
+
+  return 0
 }

deploy/vault.sh

@@ -0,0 +1,131 @@
+#!/usr/bin/env sh
+
+# Here is a script to deploy cert to hashicorp vault using curl
+# (https://www.vaultproject.io/)
+#
+# it requires following environment variables:
+#
+# VAULT_PREFIX - this contains the prefix path in vault
+# VAULT_ADDR - vault requires this to find your vault server
+# VAULT_SAVE_TOKEN - set to anything if you want to save the token
+# VAULT_RENEW_TOKEN - set to anything if you want to renew the token to default TTL before deploying
+# VAULT_KV_V2 - set to anything if you are using v2 of the kv engine
+#
+# additionally, you need to ensure that VAULT_TOKEN is avialable
+# to access the vault server
+
+#returns 0 means success, otherwise error.
+
+######## Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+vault_deploy() {
+
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  # validate required env vars
+  _getdeployconf VAULT_PREFIX
+  if [ -z "$VAULT_PREFIX" ]; then
+    _err "VAULT_PREFIX needs to be defined (contains prefix path in vault)"
+    return 1
+  fi
+  _savedeployconf VAULT_PREFIX "$VAULT_PREFIX"
+
+  _getdeployconf VAULT_ADDR
+  if [ -z "$VAULT_ADDR" ]; then
+    _err "VAULT_ADDR needs to be defined (contains vault connection address)"
+    return 1
+  fi
+  _savedeployconf VAULT_ADDR "$VAULT_ADDR"
+
+  _getdeployconf VAULT_SAVE_TOKEN
+  _savedeployconf VAULT_SAVE_TOKEN "$VAULT_SAVE_TOKEN"
+
+  _getdeployconf VAULT_RENEW_TOKEN
+  _savedeployconf VAULT_RENEW_TOKEN "$VAULT_RENEW_TOKEN"
+
+  _getdeployconf VAULT_KV_V2
+  _savedeployconf VAULT_KV_V2 "$VAULT_KV_V2"
+
+  _getdeployconf VAULT_TOKEN
+  if [ -z "$VAULT_TOKEN" ]; then
+    _err "VAULT_TOKEN needs to be defined"
+    return 1
+  fi
+  if [ -n "$VAULT_SAVE_TOKEN" ]; then
+    _savedeployconf VAULT_TOKEN "$VAULT_TOKEN"
+  fi
+
+  _migratedeployconf FABIO VAULT_FABIO_MODE
+
+  # JSON does not allow multiline strings.
+  # So replacing new-lines with "\n" here
+  _ckey=$(sed -z 's/\n/\\n/g' <"$2")
+  _ccert=$(sed -z 's/\n/\\n/g' <"$3")
+  _cca=$(sed -z 's/\n/\\n/g' <"$4")
+  _cfullchain=$(sed -z 's/\n/\\n/g' <"$5")
+
+  export _H1="X-Vault-Token: $VAULT_TOKEN"
+
+  if [ -n "$VAULT_RENEW_TOKEN" ]; then
+    URL="$VAULT_ADDR/v1/auth/token/renew-self"
+    _info "Renew the Vault token to default TTL"
+    if ! _post "" "$URL" >/dev/null; then
+      _err "Failed to renew the Vault token"
+      return 1
+    fi
+  fi
+
+  URL="$VAULT_ADDR/v1/$VAULT_PREFIX/$_cdomain"
+
+  if [ -n "$VAULT_FABIO_MODE" ]; then
+    _info "Writing certificate and key to $URL in Fabio mode"
+    if [ -n "$VAULT_KV_V2" ]; then
+      _post "{ \"data\": {\"cert\": \"$_cfullchain\", \"key\": \"$_ckey\"} }" "$URL" >/dev/null || return 1
+    else
+      _post "{\"cert\": \"$_cfullchain\", \"key\": \"$_ckey\"}" "$URL" >/dev/null || return 1
+    fi
+  else
+    if [ -n "$VAULT_KV_V2" ]; then
+      _info "Writing certificate to $URL/cert.pem"
+      _post "{\"data\": {\"value\": \"$_ccert\"}}" "$URL/cert.pem" >/dev/null || return 1
+      _info "Writing key to $URL/cert.key"
+      _post "{\"data\": {\"value\": \"$_ckey\"}}" "$URL/cert.key" >/dev/null || return 1
+      _info "Writing CA certificate to $URL/ca.pem"
+      _post "{\"data\": {\"value\": \"$_cca\"}}" "$URL/ca.pem" >/dev/null || return 1
+      _info "Writing full-chain certificate to $URL/fullchain.pem"
+      _post "{\"data\": {\"value\": \"$_cfullchain\"}}" "$URL/fullchain.pem" >/dev/null || return 1
+    else
+      _info "Writing certificate to $URL/cert.pem"
+      _post "{\"value\": \"$_ccert\"}" "$URL/cert.pem" >/dev/null || return 1
+      _info "Writing key to $URL/cert.key"
+      _post "{\"value\": \"$_ckey\"}" "$URL/cert.key" >/dev/null || return 1
+      _info "Writing CA certificate to $URL/ca.pem"
+      _post "{\"value\": \"$_cca\"}" "$URL/ca.pem" >/dev/null || return 1
+      _info "Writing full-chain certificate to $URL/fullchain.pem"
+      _post "{\"value\": \"$_cfullchain\"}" "$URL/fullchain.pem" >/dev/null || return 1
+    fi
+
+    # To make it compatible with the wrong ca path `chain.pem` which was used in former versions
+    if _contains "$(_get "$URL/chain.pem")" "-----BEGIN CERTIFICATE-----"; then
+      _err "The CA certificate has moved from chain.pem to ca.pem, if you don't depend on chain.pem anymore, you can delete it to avoid this warning"
+      _info "Updating CA certificate to $URL/chain.pem for backward compatibility"
+      if [ -n "$VAULT_KV_V2" ]; then
+        _post "{\"data\": {\"value\": \"$_cca\"}}" "$URL/chain.pem" >/dev/null || return 1
+      else
+        _post "{\"value\": \"$_cca\"}" "$URL/chain.pem" >/dev/null || return 1
+      fi
+    fi
+  fi
+
+}

deploy/vault_cli.sh

@@ -8,6 +8,8 @@
 #
 # VAULT_PREFIX - this contains the prefix path in vault
 # VAULT_ADDR - vault requires this to find your vault server
+# VAULT_SAVE_TOKEN - set to anything if you want to save the token
+# VAULT_RENEW_TOKEN - set to anything if you want to renew the token to default TTL before deploying
 #
 # additionally, you need to ensure that VAULT_TOKEN is avialable or
 # `vault auth` has applied the appropriate authorization for the vault binary
@@ -33,15 +35,36 @@ vault_cli_deploy() {
   _debug _cfullchain "$_cfullchain"
 
   # validate required env vars
+  _getdeployconf VAULT_PREFIX
   if [ -z "$VAULT_PREFIX" ]; then
     _err "VAULT_PREFIX needs to be defined (contains prefix path in vault)"
     return 1
   fi
+  _savedeployconf VAULT_PREFIX "$VAULT_PREFIX"
 
+  _getdeployconf VAULT_ADDR
   if [ -z "$VAULT_ADDR" ]; then
     _err "VAULT_ADDR needs to be defined (contains vault connection address)"
     return 1
   fi
+  _savedeployconf VAULT_ADDR "$VAULT_ADDR"
+
+  _getdeployconf VAULT_SAVE_TOKEN
+  _savedeployconf VAULT_SAVE_TOKEN "$VAULT_SAVE_TOKEN"
+
+  _getdeployconf VAULT_RENEW_TOKEN
+  _savedeployconf VAULT_RENEW_TOKEN "$VAULT_RENEW_TOKEN"
+
+  _getdeployconf VAULT_TOKEN
+  if [ -z "$VAULT_TOKEN" ]; then
+    _err "VAULT_TOKEN needs to be defined"
+    return 1
+  fi
+  if [ -n "$VAULT_SAVE_TOKEN" ]; then
+    _savedeployconf VAULT_TOKEN "$VAULT_TOKEN"
+  fi
+
+  _migratedeployconf FABIO VAULT_FABIO_MODE
 
   VAULT_CMD=$(command -v vault)
   if [ ! $? ]; then
@@ -49,13 +72,33 @@ vault_cli_deploy() {
     return 1
   fi
 
-  if [ -n "$FABIO" ]; then
-    $VAULT_CMD write "${VAULT_PREFIX}/${_cdomain}" cert=@"$_cfullchain" key=@"$_ckey" || return 1
+  if [ -n "$VAULT_RENEW_TOKEN" ]; then
+    _info "Renew the Vault token to default TTL"
+    if ! $VAULT_CMD token renew; then
+      _err "Failed to renew the Vault token"
+      return 1
+    fi
+  fi
+
+  if [ -n "$VAULT_FABIO_MODE" ]; then
+    _info "Writing certificate and key to ${VAULT_PREFIX}/${_cdomain} in Fabio mode"
+    $VAULT_CMD kv put "${VAULT_PREFIX}/${_cdomain}" cert=@"$_cfullchain" key=@"$_ckey" || return 1
   else
-    $VAULT_CMD write "${VAULT_PREFIX}/${_cdomain}/cert.pem" value=@"$_ccert" || return 1
-    $VAULT_CMD write "${VAULT_PREFIX}/${_cdomain}/cert.key" value=@"$_ckey" || return 1
-    $VAULT_CMD write "${VAULT_PREFIX}/${_cdomain}/chain.pem" value=@"$_cca" || return 1
-    $VAULT_CMD write "${VAULT_PREFIX}/${_cdomain}/fullchain.pem" value=@"$_cfullchain" || return 1
+    _info "Writing certificate to ${VAULT_PREFIX}/${_cdomain}/cert.pem"
+    $VAULT_CMD kv put "${VAULT_PREFIX}/${_cdomain}/cert.pem" value=@"$_ccert" || return 1
+    _info "Writing key to ${VAULT_PREFIX}/${_cdomain}/cert.key"
+    $VAULT_CMD kv put "${VAULT_PREFIX}/${_cdomain}/cert.key" value=@"$_ckey" || return 1
+    _info "Writing CA certificate to ${VAULT_PREFIX}/${_cdomain}/ca.pem"
+    $VAULT_CMD kv put "${VAULT_PREFIX}/${_cdomain}/ca.pem" value=@"$_cca" || return 1
+    _info "Writing full-chain certificate to ${VAULT_PREFIX}/${_cdomain}/fullchain.pem"
+    $VAULT_CMD kv put "${VAULT_PREFIX}/${_cdomain}/fullchain.pem" value=@"$_cfullchain" || return 1
+
+    # To make it compatible with the wrong ca path `chain.pem` which was used in former versions
+    if $VAULT_CMD kv get "${VAULT_PREFIX}/${_cdomain}/chain.pem" >/dev/null; then
+      _err "The CA certificate has moved from chain.pem to ca.pem, if you don't depend on chain.pem anymore, you can delete it to avoid this warning"
+      _info "Updating CA certificate to ${VAULT_PREFIX}/${_cdomain}/chain.pem for backward compatibility"
+      $VAULT_CMD kv put "${VAULT_PREFIX}/${_cdomain}/chain.pem" value=@"$_cca" || return 1
+    fi
   fi
 
 }

dnsapi/dns_1984hosting.sh

@@ -1,185 +1,175 @@
 #!/usr/bin/env sh
-#This file name is "dns_1984hosting.sh"
-#So, here must be a method dns_1984hosting_add()
-#Which will be called by acme.sh to add the txt record to your api system.
-#returns 0 means success, otherwise error.
+# This file name is "dns_1984hosting.sh"
+# So, here must be a method dns_1984hosting_add()
+# Which will be called by acme.sh to add the txt record to your api system.
+# returns 0 means success, otherwise error.
 
-#Author: Adrian Fedoreanu
-#Report Bugs here: https://github.com/acmesh-official/acme.sh
+# Author: Adrian Fedoreanu
+# Report Bugs here: https://github.com/acmesh-official/acme.sh
 # or here... https://github.com/acmesh-official/acme.sh/issues/2851
-#
-########  Public functions #####################
+
+######## Public functions #####################
 
 # Export 1984HOSTING username and password in following variables
 #
 #  One984HOSTING_Username=username
 #  One984HOSTING_Password=password
 #
-# sessionid cookie is saved in ~/.acme.sh/account.conf
-# username/password need to be set only when changed.
+# username/password and csrftoken/sessionid cookies are saved in ~/.acme.sh/account.conf
 
-#Usage: dns_1984hosting_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Usage: dns_1984hosting_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Add a text record.
 dns_1984hosting_add() {
   fulldomain=$1
   txtvalue=$2
 
-  _info "Add TXT record using 1984Hosting"
+  _info "Add TXT record using 1984Hosting."
   _debug fulldomain "$fulldomain"
   _debug txtvalue "$txtvalue"
 
   if ! _1984hosting_login; then
-    _err "1984Hosting login failed for user $One984HOSTING_Username. Check $HTTP_HEADER file"
+    _err "1984Hosting login failed for user $One984HOSTING_Username. Check $HTTP_HEADER file."
     return 1
   fi
 
-  _debug "First detect the root zone"
+  _debug "First detect the root zone."
   if ! _get_root "$fulldomain"; then
-    _err "invalid domain" "$fulldomain"
+    _err "Invalid domain '$fulldomain'."
     return 1
   fi
   _debug _sub_domain "$_sub_domain"
   _debug _domain "$_domain"
 
-  _1984hosting_add_txt_record "$_domain" "$_sub_domain" "$txtvalue"
-  return $?
+  _debug "Add TXT record $fulldomain with value '$txtvalue'."
+  value="$(printf '%s' "$txtvalue" | _url_encode)"
+  url="https://1984.hosting/domains/entry/"
+
+  postdata="entry=new"
+  postdata="$postdata&type=TXT"
+  postdata="$postdata&ttl=900"
+  postdata="$postdata&zone=$_domain"
+  postdata="$postdata&host=$_sub_domain"
+  postdata="$postdata&rdata=%22$value%22"
+  _debug2 postdata "$postdata"
+
+  _authpost "$postdata" "$url"
+  if _contains "$_response" '"haserrors": true'; then
+    _err "1984Hosting failed to add TXT record for $_sub_domain bad RC from _post."
+    return 1
+  elif _contains "$_response" "html>"; then
+    _err "1984Hosting failed to add TXT record for $_sub_domain. Check $HTTP_HEADER file."
+    return 1
+  elif _contains "$_response" '"auth": false'; then
+    _err "1984Hosting failed to add TXT record for $_sub_domain. Invalid or expired cookie."
+    return 1
+  fi
+
+  _info "Added acme challenge TXT record for $fulldomain at 1984Hosting."
+  return 0
 }
 
-#Usage: fulldomain txtvalue
-#Remove the txt record after validation.
+# Usage: fulldomain txtvalue
+# Remove the txt record after validation.
 dns_1984hosting_rm() {
   fulldomain=$1
   txtvalue=$2
 
-  _info "Delete TXT record using 1984Hosting"
+  _info "Delete TXT record using 1984Hosting."
   _debug fulldomain "$fulldomain"
   _debug txtvalue "$txtvalue"
 
   if ! _1984hosting_login; then
-    _err "1984Hosting login failed for user $One984HOSTING_Username. Check $HTTP_HEADER file"
+    _err "1984Hosting login failed for user $One984HOSTING_Username. Check $HTTP_HEADER file."
     return 1
   fi
 
-  _debug "First detect the root zone"
+  _debug "First detect the root zone."
   if ! _get_root "$fulldomain"; then
-    _err "invalid domain" "$fulldomain"
+    _err "Invalid domain '$fulldomain'."
     return 1
   fi
   _debug _sub_domain "$_sub_domain"
   _debug _domain "$_domain"
+  _debug "Delete $fulldomain TXT record."
 
-  _1984hosting_delete_txt_record "$_domain" "$_sub_domain"
-  return $?
-}
-
-####################  Private functions below ##################################
-
-# usage _1984hosting_add_txt_record domain subdomain value
-# returns 0 success
-_1984hosting_add_txt_record() {
-  _debug "Add TXT record $1 with value '$3'"
-  domain="$1"
-  subdomain="$2"
-  value="$(printf '%s' "$3" | _url_encode)"
-  url="https://management.1984hosting.com/domains/entry/"
-
-  postdata="entry=new"
-  postdata="$postdata&type=TXT"
-  postdata="$postdata&ttl=3600"
-  postdata="$postdata&zone=$domain"
-  postdata="$postdata&host=$subdomain"
-  postdata="$postdata&rdata=%22$value%22"
-  _debug2 postdata "$postdata"
-
-  _authpost "$postdata" "$url"
-  response="$(echo "$_response" | _normalizeJson)"
-  _debug2 response "$response"
-
-  if _contains "$response" '"haserrors": true'; then
-    _err "1984Hosting failed to add TXT record for $subdomain bad RC from _post"
-    return 1
-  elif _contains "$response" "<html>"; then
-    _err "1984Hosting failed to add TXT record for $subdomain. Check $HTTP_HEADER file"
-    return 1
-  elif _contains "$response" '"auth": false'; then
-    _err "1984Hosting failed to add TXT record for $subdomain. Invalid or expired cookie"
+  url="https://1984.hosting/domains"
+  if ! _get_zone_id "$url" "$_domain"; then
+    _err "Invalid zone '$_domain'."
     return 1
   fi
 
-  _info "Added acme challenge TXT record for $fulldomain at 1984Hosting"
-  return 0
-}
-
-# usage _1984hosting_delete_txt_record entry_id
-# returns 0 success
-_1984hosting_delete_txt_record() {
-  _debug "Delete $fulldomain TXT record"
-  domain="$1"
-  subdomain="$2"
-  url="https://management.1984hosting.com/domains"
-
-  _htmlget "$url" "$domain"
-  _debug2 _response "$_response"
-  zone_id="$(echo "$_response" | _egrep_o 'zone\/[0-9]+')"
-  _debug2 zone_id "$zone_id"
-  if [ -z "$zone_id" ]; then
-    _err "Error getting zone_id for $1"
-    return 1
-  fi
-
-  _htmlget "$url/$zone_id" "$subdomain"
-  _debug2 _response "$_response"
+  _htmlget "$url/$_zone_id" "$txtvalue"
   entry_id="$(echo "$_response" | _egrep_o 'entry_[0-9]+' | sed 's/entry_//')"
   _debug2 entry_id "$entry_id"
   if [ -z "$entry_id" ]; then
-    _err "Error getting TXT entry_id for $1"
+    _err "Error getting TXT entry_id for $1."
     return 1
   fi
 
   _authpost "entry=$entry_id" "$url/delentry/"
-  response="$(echo "$_response" | _normalizeJson)"
-  _debug2 response "$response"
-
-  if ! _contains "$response" '"ok": true'; then
-    _err "1984Hosting failed to delete TXT record for $entry_id bad RC from _post"
+  if ! _contains "$_response" '"ok": true'; then
+    _err "1984Hosting failed to delete TXT record for $entry_id bad RC from _post."
     return 1
   fi
 
-  _info "Deleted acme challenge TXT record for $fulldomain at 1984Hosting"
+  _info "Deleted acme challenge TXT record for $fulldomain at 1984Hosting."
   return 0
 }
 
-# usage: _1984hosting_login username password
-# returns 0 success
+####################  Private functions below ##################################
 _1984hosting_login() {
   if ! _check_credentials; then return 1; fi
 
-  if _check_cookie; then
-    _debug "Already logged in"
+  if _check_cookies; then
+    _debug "Already logged in."
     return 0
   fi
 
-  _debug "Login to 1984Hosting as user $One984HOSTING_Username"
+  _debug "Login to 1984Hosting as user $One984HOSTING_Username."
   username=$(printf '%s' "$One984HOSTING_Username" | _url_encode)
   password=$(printf '%s' "$One984HOSTING_Password" | _url_encode)
-  url="https://management.1984hosting.com/accounts/checkuserauth/"
+  url="https://1984.hosting/accounts/checkuserauth/"
+
+  _get "https://1984.hosting/accounts/login/" | grep "csrfmiddlewaretoken"
+  csrftoken="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | tr -d ';')"
+  sessionid="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'sessionid=[^;]*;' | tr -d ';')"
 
-  response="$(_post "username=$username&password=$password&otpkey=" "$url")"
+  if [ -z "$csrftoken" ] || [ -z "$sessionid" ]; then
+    _err "One or more cookies are empty: '$csrftoken', '$sessionid'."
+    return 1
+  fi
+
+  export _H1="Cookie: $csrftoken; $sessionid"
+  export _H2="Referer: https://1984.hosting/accounts/login/"
+  csrf_header=$(echo "$csrftoken" | sed 's/csrftoken=//' | _head_n 1)
+  export _H3="X-CSRFToken: $csrf_header"
+
+  response="$(_post "username=$username&password=$password&otpkey=" $url)"
   response="$(echo "$response" | _normalizeJson)"
   _debug2 response "$response"
 
   if _contains "$response" '"loggedin": true'; then
-    One984HOSTING_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _tail_n 1 | _egrep_o 'sessionid=[^;]*;' | tr -d ';')"
-    export One984HOSTING_COOKIE
-    _saveaccountconf_mutable One984HOSTING_COOKIE "$One984HOSTING_COOKIE"
+    One984HOSTING_SESSIONID_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'sessionid=[^;]*;' | tr -d ';')"
+    One984HOSTING_CSRFTOKEN_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | tr -d ';')"
+    export One984HOSTING_SESSIONID_COOKIE
+    export One984HOSTING_CSRFTOKEN_COOKIE
+    _saveaccountconf_mutable One984HOSTING_Username "$One984HOSTING_Username"
+    _saveaccountconf_mutable One984HOSTING_Password "$One984HOSTING_Password"
+    _saveaccountconf_mutable One984HOSTING_SESSIONID_COOKIE "$One984HOSTING_SESSIONID_COOKIE"
+    _saveaccountconf_mutable One984HOSTING_CSRFTOKEN_COOKIE "$One984HOSTING_CSRFTOKEN_COOKIE"
     return 0
   fi
   return 1
 }
 
 _check_credentials() {
+  One984HOSTING_Username="${One984HOSTING_Username:-$(_readaccountconf_mutable One984HOSTING_Username)}"
+  One984HOSTING_Password="${One984HOSTING_Password:-$(_readaccountconf_mutable One984HOSTING_Password)}"
   if [ -z "$One984HOSTING_Username" ] || [ -z "$One984HOSTING_Password" ]; then
     One984HOSTING_Username=""
     One984HOSTING_Password=""
+    _clearaccountconf_mutable One984HOSTING_Username
+    _clearaccountconf_mutable One984HOSTING_Password
     _err "You haven't specified 1984Hosting username or password yet."
     _err "Please export as One984HOSTING_Username / One984HOSTING_Password and try again."
     return 1
@@ -187,44 +177,47 @@ _check_credentials() {
   return 0
 }
 
-_check_cookie() {
-  One984HOSTING_COOKIE="${One984HOSTING_COOKIE:-$(_readaccountconf_mutable One984HOSTING_COOKIE)}"
-  if [ -z "$One984HOSTING_COOKIE" ]; then
-    _debug "No cached cookie found"
+_check_cookies() {
+  One984HOSTING_SESSIONID_COOKIE="${One984HOSTING_SESSIONID_COOKIE:-$(_readaccountconf_mutable One984HOSTING_SESSIONID_COOKIE)}"
+  One984HOSTING_CSRFTOKEN_COOKIE="${One984HOSTING_CSRFTOKEN_COOKIE:-$(_readaccountconf_mutable One984HOSTING_CSRFTOKEN_COOKIE)}"
+  if [ -z "$One984HOSTING_SESSIONID_COOKIE" ] || [ -z "$One984HOSTING_CSRFTOKEN_COOKIE" ]; then
+    _debug "No cached cookie(s) found."
     return 1
   fi
 
-  _authget "https://management.1984hosting.com/accounts/loginstatus/"
-  response="$(echo "$_response" | _normalizeJson)"
-  if _contains "$response" '"ok": true'; then
-    _debug "Cached cookie still valid"
+  _authget "https://1984.hosting/accounts/loginstatus/"
+  if _contains "$_response" '"ok": true'; then
+    _debug "Cached cookies still valid."
     return 0
   fi
-  _debug "Cached cookie no longer valid"
-  One984HOSTING_COOKIE=""
-  _saveaccountconf_mutable One984HOSTING_COOKIE "$One984HOSTING_COOKIE"
+
+  _debug "Cached cookies no longer valid. Clearing cookies."
+  One984HOSTING_SESSIONID_COOKIE=""
+  One984HOSTING_CSRFTOKEN_COOKIE=""
+  _clearaccountconf_mutable One984HOSTING_SESSIONID_COOKIE
+  _clearaccountconf_mutable One984HOSTING_CSRFTOKEN_COOKIE
   return 1
 }
 
-#_acme-challenge.www.domain.com
-#returns
-# _sub_domain=_acme-challenge.www
-# _domain=domain.com
+# _acme-challenge.www.domain.com
+# Returns
+#  _sub_domain=_acme-challenge.www
+#  _domain=domain.com
 _get_root() {
   domain="$1"
-  i=2
+  i=1
   p=1
   while true; do
-    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
 
+    # not valid
     if [ -z "$h" ]; then
-      #not valid
       return 1
     fi
 
-    _authget "https://management.1984hosting.com/domains/soacheck/?zone=$h&nameserver=ns0.1984.is."
-    if _contains "$_response" "serial"; then
-      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+    _authget "https://1984.hosting/domains/soacheck/?zone=$h&nameserver=ns0.1984.is."
+    if _contains "$_response" "serial" && ! _contains "$_response" "null"; then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
       _domain="$h"
       return 0
     fi
@@ -234,21 +227,47 @@ _get_root() {
   return 1
 }
 
-# add extra headers to request
+# Usage: _get_zone_id url domain.com
+# Returns zone id for domain.com
+_get_zone_id() {
+  url=$1
+  domain=$2
+  _htmlget "$url" "$domain"
+  _zone_id="$(echo "$_response" | _egrep_o 'zone\/[0-9]+' | _head_n 1)"
+  _debug2 _zone_id "$_zone_id"
+  if [ -z "$_zone_id" ]; then
+    _err "Error getting _zone_id for $2."
+    return 1
+  fi
+  return 0
+}
+
+# Add extra headers to request
 _authget() {
-  export _H1="Cookie: $One984HOSTING_COOKIE"
-  _response=$(_get "$1")
+  export _H1="Cookie: $One984HOSTING_CSRFTOKEN_COOKIE; $One984HOSTING_SESSIONID_COOKIE"
+  _response=$(_get "$1" | _normalizeJson)
+  _debug2 _response "$_response"
 }
 
-# truncate huge HTML response
-# echo: Argument list too long
+# Truncate huge HTML response
+# Echo: Argument list too long
 _htmlget() {
-  export _H1="Cookie: $One984HOSTING_COOKIE"
-  _response=$(_get "$1" | grep "$2" | _head_n 1)
+  export _H1="Cookie: $One984HOSTING_CSRFTOKEN_COOKIE; $One984HOSTING_SESSIONID_COOKIE"
+  _response=$(_get "$1" | grep "$2")
+  if _contains "$_response" "@$2"; then
+    _response=$(echo "$_response" | grep -v "[@]" | _head_n 1)
+  fi
+  _debug2 _response "$_response"
 }
 
-# add extra headers to request
+# Add extra headers to request
 _authpost() {
-  export _H1="Cookie: $One984HOSTING_COOKIE"
-  _response=$(_post "$1" "$2")
+  url="https://1984.hosting/domains"
+  _get_zone_id "$url" "$_domain"
+  csrf_header="$(echo "$One984HOSTING_CSRFTOKEN_COOKIE" | _egrep_o "=[^=][0-9a-zA-Z]*" | tr -d "=")"
+  export _H1="Cookie: $One984HOSTING_CSRFTOKEN_COOKIE; $One984HOSTING_SESSIONID_COOKIE"
+  export _H2="Referer: https://1984.hosting/domains/$_zone_id"
+  export _H3="X-CSRFToken: $csrf_header"
+  _response="$(_post "$1" "$2" | _normalizeJson)"
+  _debug2 _response "$_response"
 }

dnsapi/dns_acmedns.sh

@@ -1,31 +1,70 @@
 #!/usr/bin/env sh
 #
 #Author: Wolfgang Ebner
-#Report Bugs here: https://github.com/webner/acme.sh
+#Author: Sven Neubuaer
+#Report Bugs here: https://github.com/dampfklon/acme.sh
+#
+# Usage:
+# export ACMEDNS_BASE_URL="https://auth.acme-dns.io"
+#
+# You can optionally define an already existing account:
+#
+# export ACMEDNS_USERNAME="<username>"
+# export ACMEDNS_PASSWORD="<password>"
+# export ACMEDNS_SUBDOMAIN="<subdomain>"
 #
 ########  Public functions #####################
 
 #Usage: dns_acmedns_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to add txt record
 dns_acmedns_add() {
   fulldomain=$1
   txtvalue=$2
   _info "Using acme-dns"
-  _debug fulldomain "$fulldomain"
-  _debug txtvalue "$txtvalue"
+  _debug "fulldomain $fulldomain"
+  _debug "txtvalue $txtvalue"
 
-  ACMEDNS_UPDATE_URL="${ACMEDNS_UPDATE_URL:-$(_readaccountconf_mutable ACMEDNS_UPDATE_URL)}"
+  #for compatiblity from account conf
   ACMEDNS_USERNAME="${ACMEDNS_USERNAME:-$(_readaccountconf_mutable ACMEDNS_USERNAME)}"
+  _clearaccountconf_mutable ACMEDNS_USERNAME
   ACMEDNS_PASSWORD="${ACMEDNS_PASSWORD:-$(_readaccountconf_mutable ACMEDNS_PASSWORD)}"
+  _clearaccountconf_mutable ACMEDNS_PASSWORD
   ACMEDNS_SUBDOMAIN="${ACMEDNS_SUBDOMAIN:-$(_readaccountconf_mutable ACMEDNS_SUBDOMAIN)}"
+  _clearaccountconf_mutable ACMEDNS_SUBDOMAIN
+
+  ACMEDNS_BASE_URL="${ACMEDNS_BASE_URL:-$(_readdomainconf ACMEDNS_BASE_URL)}"
+  ACMEDNS_USERNAME="${ACMEDNS_USERNAME:-$(_readdomainconf ACMEDNS_USERNAME)}"
+  ACMEDNS_PASSWORD="${ACMEDNS_PASSWORD:-$(_readdomainconf ACMEDNS_PASSWORD)}"
+  ACMEDNS_SUBDOMAIN="${ACMEDNS_SUBDOMAIN:-$(_readdomainconf ACMEDNS_SUBDOMAIN)}"
+
+  if [ "$ACMEDNS_BASE_URL" = "" ]; then
+    ACMEDNS_BASE_URL="https://auth.acme-dns.io"
+  fi
+
+  ACMEDNS_UPDATE_URL="$ACMEDNS_BASE_URL/update"
+  ACMEDNS_REGISTER_URL="$ACMEDNS_BASE_URL/register"
 
-  if [ "$ACMEDNS_UPDATE_URL" = "" ]; then
-    ACMEDNS_UPDATE_URL="https://auth.acme-dns.io/update"
+  if [ -z "$ACMEDNS_USERNAME" ] || [ -z "$ACMEDNS_PASSWORD" ]; then
+    response="$(_post "" "$ACMEDNS_REGISTER_URL" "" "POST")"
+    _debug response "$response"
+    ACMEDNS_USERNAME=$(echo "$response" | sed -n 's/^{.*\"username\":[ ]*\"\([^\"]*\)\".*}/\1/p')
+    _debug "received username: $ACMEDNS_USERNAME"
+    ACMEDNS_PASSWORD=$(echo "$response" | sed -n 's/^{.*\"password\":[ ]*\"\([^\"]*\)\".*}/\1/p')
+    _debug "received password: $ACMEDNS_PASSWORD"
+    ACMEDNS_SUBDOMAIN=$(echo "$response" | sed -n 's/^{.*\"subdomain\":[ ]*\"\([^\"]*\)\".*}/\1/p')
+    _debug "received subdomain: $ACMEDNS_SUBDOMAIN"
+    ACMEDNS_FULLDOMAIN=$(echo "$response" | sed -n 's/^{.*\"fulldomain\":[ ]*\"\([^\"]*\)\".*}/\1/p')
+    _info "##########################################################"
+    _info "# Create $fulldomain CNAME $ACMEDNS_FULLDOMAIN DNS entry #"
+    _info "##########################################################"
+    _info "Press enter to continue... "
+    read -r _
   fi
 
-  _saveaccountconf_mutable ACMEDNS_UPDATE_URL "$ACMEDNS_UPDATE_URL"
-  _saveaccountconf_mutable ACMEDNS_USERNAME "$ACMEDNS_USERNAME"
-  _saveaccountconf_mutable ACMEDNS_PASSWORD "$ACMEDNS_PASSWORD"
-  _saveaccountconf_mutable ACMEDNS_SUBDOMAIN "$ACMEDNS_SUBDOMAIN"
+  _savedomainconf ACMEDNS_BASE_URL "$ACMEDNS_BASE_URL"
+  _savedomainconf ACMEDNS_USERNAME "$ACMEDNS_USERNAME"
+  _savedomainconf ACMEDNS_PASSWORD "$ACMEDNS_PASSWORD"
+  _savedomainconf ACMEDNS_SUBDOMAIN "$ACMEDNS_SUBDOMAIN"
 
   export _H1="X-Api-User: $ACMEDNS_USERNAME"
   export _H2="X-Api-Key: $ACMEDNS_PASSWORD"
@@ -48,8 +87,8 @@ dns_acmedns_rm() {
   fulldomain=$1
   txtvalue=$2
   _info "Using acme-dns"
-  _debug fulldomain "$fulldomain"
-  _debug txtvalue "$txtvalue"
+  _debug "fulldomain $fulldomain"
+  _debug "txtvalue $txtvalue"
 }
 
 ####################  Private functions below ##################################

dnsapi/dns_acmeproxy.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env sh
 
-## Acmeproxy DNS provider to be used with acmeproxy (http://github.com/mdbraber/acmeproxy)
+## Acmeproxy DNS provider to be used with acmeproxy (https://github.com/mdbraber/acmeproxy)
 ## API integration by Maarten den Braber
 ##
 ## Report any bugs via https://github.com/mdbraber/acme.sh

dnsapi/dns_anx.sh

@@ -0,0 +1,150 @@
+#!/usr/bin/env sh
+
+# Anexia CloudDNS acme.sh hook
+# Author: MA
+
+#ANX_Token="xxxx"
+
+ANX_API='https://engine.anexia-it.com/api/clouddns/v1'
+
+########  Public functions #####################
+
+dns_anx_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using ANX CDNS API"
+
+  ANX_Token="${ANX_Token:-$(_readaccountconf_mutable ANX_Token)}"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if [ "$ANX_Token" ]; then
+    _saveaccountconf_mutable ANX_Token "$ANX_Token"
+  else
+    _err "You didn't specify a ANEXIA Engine API token."
+    return 1
+  fi
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+
+  # Always add records, wildcard need two records with the same name
+  _anx_rest POST "zone.json/${_domain}/records" "{\"name\":\"$_sub_domain\",\"type\":\"TXT\",\"rdata\":\"$txtvalue\"}"
+  if _contains "$response" "$txtvalue"; then
+    return 0
+  else
+    return 1
+  fi
+}
+
+dns_anx_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using ANX CDNS API"
+
+  ANX_Token="${ANX_Token:-$(_readaccountconf_mutable ANX_Token)}"
+
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+
+  _get_record_id
+
+  if _is_uuid "$_record_id"; then
+    if ! _anx_rest DELETE "zone.json/${_domain}/records/$_record_id"; then
+      _err "Delete record"
+      return 1
+    fi
+  else
+    _info "No record found."
+  fi
+  echo "$response" | tr -d " " | grep \"status\":\"OK\" >/dev/null
+}
+
+####################  Private functions below ##################################
+
+_is_uuid() {
+  pattern='^\{?[A-Z0-9a-z]{8}-[A-Z0-9a-z]{4}-[A-Z0-9a-z]{4}-[A-Z0-9a-z]{4}-[A-Z0-9a-z]{12}\}?$'
+  if echo "$1" | _egrep_o "$pattern" >/dev/null; then
+    return 0
+  fi
+  return 1
+}
+
+_get_record_id() {
+  _debug subdomain "$_sub_domain"
+  _debug domain "$_domain"
+
+  if _anx_rest GET "zone.json/${_domain}/records?name=$_sub_domain&type=TXT"; then
+    _debug response "$response"
+    if _contains "$response" "\"name\":\"$_sub_domain\"" >/dev/null; then
+      _record_id=$(printf "%s\n" "$response" | _egrep_o "\[.\"identifier\":\"[^\"]*\"" | head -n 1 | cut -d : -f 2 | tr -d \")
+    else
+      _record_id=''
+    fi
+  else
+    _err "Search existing record"
+  fi
+}
+
+_anx_rest() {
+  m=$1
+  ep="$2"
+  data="$3"
+  _debug "$ep"
+
+  export _H1="Content-Type: application/json"
+  export _H2="Authorization: Token $ANX_Token"
+
+  if [ "$m" != "GET" ]; then
+    _debug data "$data"
+    response="$(_post "$data" "${ANX_API}/$ep" "" "$m")"
+  else
+    response="$(_get "${ANX_API}/$ep")"
+  fi
+
+  # shellcheck disable=SC2181
+  if [ "$?" != "0" ]; then
+    _err "error $ep"
+    return 1
+  fi
+  _debug response "$response"
+  return 0
+}
+
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  _anx_rest GET "zone.json"
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    if _contains "$response" "\"name\":\"$h\""; then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+      _domain=$h
+      return 0
+    fi
+
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}

dnsapi/dns_arvan.sh

@@ -1,11 +1,10 @@
 #!/usr/bin/env sh
 
-#Arvan_Token="xxxx"
+# Arvan_Token="Apikey xxxx"
 
-ARVAN_API_URL="https://napi.arvancloud.com/cdn/4.0/domains"
-
-#Author: Ehsan Aliakbar
-#Report Bugs here: https://github.com/Neilpang/acme.sh
+ARVAN_API_URL="https://napi.arvancloud.ir/cdn/4.0/domains"
+# Author: Vahid Fardi
+# Report Bugs here: https://github.com/Neilpang/acme.sh
 #
 ########  Public functions #####################
 
@@ -19,7 +18,7 @@ dns_arvan_add() {
 
   if [ -z "$Arvan_Token" ]; then
     _err "You didn't specify \"Arvan_Token\" token yet."
-    _err "You can get yours from here https://npanel.arvancloud.com/profile/api-keys"
+    _err "You can get yours from here https://npanel.arvancloud.ir/profile/api-keys"
     return 1
   fi
   #save the api token to the account conf file.
@@ -38,9 +37,10 @@ dns_arvan_add() {
   _info "Adding record"
   if _arvan_rest POST "$_domain/dns-records" "{\"type\":\"TXT\",\"name\":\"$_sub_domain\",\"value\":{\"text\":\"$txtvalue\"},\"ttl\":120}"; then
     if _contains "$response" "$txtvalue"; then
+      _info "response id is $response"
       _info "Added, OK"
       return 0
-    elif _contains "$response" "Record Data is Duplicated"; then
+    elif _contains "$response" "Record Data is duplicate"; then
       _info "Already exists, OK"
       return 0
     else
@@ -49,7 +49,7 @@ dns_arvan_add() {
     fi
   fi
   _err "Add txt record error."
-  return 1
+  return 0
 }
 
 #Usage: fulldomain txtvalue
@@ -73,33 +73,21 @@ dns_arvan_rm() {
   _debug _domain "$_domain"
 
   _debug "Getting txt records"
-  shorted_txtvalue=$(printf "%s" "$txtvalue" | cut -d "-" -d "_" -f1)
-  _arvan_rest GET "${_domain}/dns-records?search=$shorted_txtvalue"
-
+  _arvan_rest GET "${_domain}/dns-records"
   if ! printf "%s" "$response" | grep \"current_page\":1 >/dev/null; then
     _err "Error on Arvan Api"
     _err "Please create a github issue with debbug log"
     return 1
   fi
 
-  count=$(printf "%s\n" "$response" | _egrep_o "\"total\":[^,]*" | cut -d : -f 2)
-  _debug count "$count"
-  if [ "$count" = "0" ]; then
-    _info "Don't need to remove."
-  else
-    record_id=$(printf "%s\n" "$response" | _egrep_o "\"id\":\"[^\"]*\"" | cut -d : -f 2 | tr -d \" | head -n 1)
-    _debug "record_id" "$record_id"
-    if [ -z "$record_id" ]; then
-      _err "Can not get record id to remove."
-      return 1
-    fi
-    if ! _arvan_rest "DELETE" "${_domain}/dns-records/$record_id"; then
-      _err "Delete record error."
-      return 1
-    fi
-    _debug "$response"
-    _contains "$response" 'dns record deleted'
+  _record_id=$(echo "$response" | _egrep_o ".\"id\":\"[^\"]*\",\"type\":\"txt\",\"name\":\"_acme-challenge\",\"value\":{\"text\":\"$txtvalue\"}" | cut -d : -f 2 | cut -d , -f 1 | tr -d \")
+  if ! _arvan_rest "DELETE" "${_domain}/dns-records/${_record_id}"; then
+    _err "Error on Arvan Api"
+    return 1
   fi
+  _debug "$response"
+  _contains "$response" 'dns record deleted'
+  return 0
 }
 
 ####################  Private functions below ##################################
@@ -111,7 +99,7 @@ dns_arvan_rm() {
 # _domain_id=sdjkglgdfewsdfg
 _get_root() {
   domain=$1
-  i=1
+  i=2
   p=1
   while true; do
     h=$(printf "%s" "$domain" | cut -d . -f $i-100)
@@ -121,12 +109,11 @@ _get_root() {
       return 1
     fi
 
-    if ! _arvan_rest GET "?search=$h"; then
+    if ! _arvan_rest GET "$h"; then
       return 1
     fi
-
-    if _contains "$response" "\"domain\":\"$h\"" || _contains "$response" '"total":1'; then
-      _domain_id=$(echo "$response" | _egrep_o "\[.\"id\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
+    if _contains "$response" "\"domain\":\"$h\""; then
+      _domain_id=$(echo "$response" | cut -d : -f 3 | cut -d , -f 1 | tr -d \")
       if [ "$_domain_id" ]; then
         _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
         _domain=$h
@@ -146,7 +133,6 @@ _arvan_rest() {
   data="$3"
 
   token_trimmed=$(echo "$Arvan_Token" | tr -d '"')
-
   export _H1="Authorization: $token_trimmed"
 
   if [ "$mtd" = "DELETE" ]; then
@@ -155,9 +141,11 @@ _arvan_rest() {
     response="$(_post "$data" "$ARVAN_API_URL/$ep" "" "$mtd")"
   elif [ "$mtd" = "POST" ]; then
     export _H2="Content-Type: application/json"
+    export _H3="Accept: application/json"
     _debug data "$data"
     response="$(_post "$data" "$ARVAN_API_URL/$ep" "" "$mtd")"
   else
     response="$(_get "$ARVAN_API_URL/$ep$data")"
   fi
+  return 0
 }

dnsapi/dns_aurora.sh

@@ -0,0 +1,171 @@
+#!/usr/bin/env sh
+
+#
+#AURORA_Key="sdfsdfsdfljlbjkljlkjsdfoiwje"
+#
+#AURORA_Secret="sdfsdfsdfljlbjkljlkjsdfoiwje"
+
+AURORA_Api="https://api.auroradns.eu"
+
+########  Public functions #####################
+
+#Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_aurora_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  AURORA_Key="${AURORA_Key:-$(_readaccountconf_mutable AURORA_Key)}"
+  AURORA_Secret="${AURORA_Secret:-$(_readaccountconf_mutable AURORA_Secret)}"
+
+  if [ -z "$AURORA_Key" ] || [ -z "$AURORA_Secret" ]; then
+    AURORA_Key=""
+    AURORA_Secret=""
+    _err "You didn't specify an Aurora api key and secret yet."
+    _err "You can get yours from here https://cp.pcextreme.nl/auroradns/users."
+    return 1
+  fi
+
+  #save the api key and secret to the account conf file.
+  _saveaccountconf_mutable AURORA_Key "$AURORA_Key"
+  _saveaccountconf_mutable AURORA_Secret "$AURORA_Secret"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _info "Adding record"
+  if _aurora_rest POST "zones/$_domain_id/records" "{\"type\":\"TXT\",\"name\":\"$_sub_domain\",\"content\":\"$txtvalue\",\"ttl\":300}"; then
+    if _contains "$response" "$txtvalue"; then
+      _info "Added, OK"
+      return 0
+    elif _contains "$response" "RecordExistsError"; then
+      _info "Already exists, OK"
+      return 0
+    else
+      _err "Add txt record error."
+      return 1
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+
+}
+
+#fulldomain txtvalue
+dns_aurora_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  AURORA_Key="${AURORA_Key:-$(_readaccountconf_mutable AURORA_Key)}"
+  AURORA_Secret="${AURORA_Secret:-$(_readaccountconf_mutable AURORA_Secret)}"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting records"
+  _aurora_rest GET "zones/${_domain_id}/records"
+
+  if ! _contains "$response" "$txtvalue"; then
+    _info "Don't need to remove."
+  else
+    records=$(echo "$response" | _normalizeJson | tr -d "[]" | sed "s/},{/}|{/g" | tr "|" "\n")
+    if [ "$(echo "$records" | wc -l)" -le 2 ]; then
+      _err "Can not parse records."
+      return 1
+    fi
+    record_id=$(echo "$records" | grep "\"type\": *\"TXT\"" | grep "\"name\": *\"$_sub_domain\"" | grep "\"content\": *\"$txtvalue\"" | _egrep_o "\"id\": *\"[^\"]*\"" | cut -d : -f 2 | tr -d \" | _head_n 1 | tr -d " ")
+    _debug "record_id" "$record_id"
+    if [ -z "$record_id" ]; then
+      _err "Can not get record id to remove."
+      return 1
+    fi
+    if ! _aurora_rest DELETE "zones/$_domain_id/records/$record_id"; then
+      _err "Delete record error."
+      return 1
+    fi
+  fi
+  return 0
+
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+# _domain_id=sdjkglgdfewsdfg
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    if ! _aurora_rest GET "zones/$h"; then
+      return 1
+    fi
+
+    if _contains "$response" "\"name\": \"$h\""; then
+      _domain_id=$(echo "$response" | _normalizeJson | tr -d "{}" | tr "," "\n" | grep "\"id\": *\"" | cut -d : -f 2 | tr -d \" | _head_n 1 | tr -d " ")
+      _debug _domain_id "$_domain_id"
+      if [ "$_domain_id" ]; then
+        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+        _domain=$h
+        return 0
+      fi
+      return 1
+    fi
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+_aurora_rest() {
+  m=$1
+  ep="$2"
+  data="$3"
+  _debug "$ep"
+
+  key_trimmed=$(echo "$AURORA_Key" | tr -d '"')
+  secret_trimmed=$(echo "$AURORA_Secret" | tr -d '"')
+
+  timestamp=$(date -u +"%Y%m%dT%H%M%SZ")
+  signature=$(printf "%s/%s%s" "$m" "$ep" "$timestamp" | _hmac sha256 "$(printf "%s" "$secret_trimmed" | _hex_dump | tr -d " ")" | _base64)
+  authorization=$(printf "AuroraDNSv1 %s" "$(printf "%s:%s" "$key_trimmed" "$signature" | _base64)")
+
+  export _H1="Content-Type: application/json; charset=UTF-8"
+  export _H2="X-AuroraDNS-Date: $timestamp"
+  export _H3="Authorization: $authorization"
+
+  if [ "$m" != "GET" ]; then
+    _debug data "$data"
+    response="$(_post "$data" "$AURORA_Api/$ep" "" "$m")"
+  else
+    response="$(_get "$AURORA_Api/$ep")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "error $ep"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_aws.sh

@@ -32,7 +32,7 @@ dns_aws_add() {
   if [ -z "$AWS_ACCESS_KEY_ID" ] || [ -z "$AWS_SECRET_ACCESS_KEY" ]; then
     AWS_ACCESS_KEY_ID=""
     AWS_SECRET_ACCESS_KEY=""
-    _err "You haven't specifed the aws route53 api key id and and api key secret yet."
+    _err "You haven't specified the aws route53 api key id and and api key secret yet."
     _err "Please create your key and try again. see $(__green $AWS_WIKI)"
     return 1
   fi
@@ -152,34 +152,23 @@ dns_aws_rm() {
 
 _get_root() {
   domain=$1
-  i=2
+  i=1
   p=1
 
-  if aws_rest GET "2013-04-01/hostedzone"; then
-    while true; do
-      h=$(printf "%s" "$domain" | cut -d . -f $i-100)
-      _debug2 "Checking domain: $h"
-      if [ -z "$h" ]; then
-        if _contains "$response" "<IsTruncated>true</IsTruncated>" && _contains "$response" "<NextMarker>"; then
-          _debug "IsTruncated"
-          _nextMarker="$(echo "$response" | _egrep_o "<NextMarker>.*</NextMarker>" | cut -d '>' -f 2 | cut -d '<' -f 1)"
-          _debug "NextMarker" "$_nextMarker"
-          if aws_rest GET "2013-04-01/hostedzone" "marker=$_nextMarker"; then
-            _debug "Truncated request OK"
-            i=2
-            p=1
-            continue
-          else
-            _err "Truncated request error."
-          fi
-        fi
-        #not valid
-        _err "Invalid domain"
-        return 1
-      fi
+  # iterate over names (a.b.c.d -> b.c.d -> c.d -> d)
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug "Checking domain: $h"
+    if [ -z "$h" ]; then
+      _error "invalid domain"
+      return 1
+    fi
 
+    # iterate over paginated result for list_hosted_zones
+    aws_rest GET "2013-04-01/hostedzone"
+    while true; do
       if _contains "$response" "<Name>$h.</Name>"; then
-        hostedzone="$(echo "$response" | sed 's/<HostedZone>/#&/g' | tr '#' '\n' | _egrep_o "<HostedZone><Id>[^<]*<.Id><Name>$h.<.Name>.*<PrivateZone>false<.PrivateZone>.*<.HostedZone>")"
+        hostedzone="$(echo "$response" | tr -d '\n' | sed 's/<HostedZone>/#&/g' | tr '#' '\n' | _egrep_o "<HostedZone><Id>[^<]*<.Id><Name>$h.<.Name>.*<PrivateZone>false<.PrivateZone>.*<.HostedZone>")"
         _debug hostedzone "$hostedzone"
         if [ "$hostedzone" ]; then
           _domain_id=$(printf "%s\n" "$hostedzone" | _egrep_o "<Id>.*<.Id>" | head -n 1 | _egrep_o ">.*<" | tr -d "<>")
@@ -192,10 +181,19 @@ _get_root() {
           return 1
         fi
       fi
-      p=$i
-      i=$(_math "$i" + 1)
+      if _contains "$response" "<IsTruncated>true</IsTruncated>" && _contains "$response" "<NextMarker>"; then
+        _debug "IsTruncated"
+        _nextMarker="$(echo "$response" | _egrep_o "<NextMarker>.*</NextMarker>" | cut -d '>' -f 2 | cut -d '<' -f 1)"
+        _debug "NextMarker" "$_nextMarker"
+      else
+        break
+      fi
+      _debug "Checking domain: $h - Next Page "
+      aws_rest GET "2013-04-01/hostedzone" "marker=$_nextMarker"
     done
-  fi
+    p=$i
+    i=$(_math "$i" + 1)
+  done
   return 1
 }
 

dnsapi/dns_azion.sh

@@ -0,0 +1,204 @@
+#!/usr/bin/env sh
+
+#
+#AZION_Email=""
+#AZION_Password=""
+#
+
+AZION_Api="https://api.azionapi.net"
+
+########  Public functions ########
+
+# Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to add txt record
+dns_azion_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _debug "Detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "Domain not found"
+    return 1
+  fi
+
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+  _debug _domain_id "$_domain_id"
+
+  _info "Add or update record"
+  _get_record "$_domain_id" "$_sub_domain"
+  if [ "$record_id" ]; then
+    _payload="{\"record_type\": \"TXT\", \"entry\": \"$_sub_domain\", \"answers_list\": [$answers_list, \"$txtvalue\"], \"ttl\": 20}"
+    if _azion_rest PUT "intelligent_dns/$_domain_id/records/$record_id" "$_payload"; then
+      if _contains "$response" "$txtvalue"; then
+        _info "Record updated."
+        return 0
+      fi
+    fi
+  else
+    _payload="{\"record_type\": \"TXT\", \"entry\": \"$_sub_domain\", \"answers_list\": [\"$txtvalue\"], \"ttl\": 20}"
+    if _azion_rest POST "intelligent_dns/$_domain_id/records" "$_payload"; then
+      if _contains "$response" "$txtvalue"; then
+        _info "Record added."
+        return 0
+      fi
+    fi
+  fi
+  _err "Failed to add or update record."
+  return 1
+}
+
+# Usage: fulldomain txtvalue
+# Used to remove the txt record after validation
+dns_azion_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _debug "Detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "Domain not found"
+    return 1
+  fi
+
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+  _debug _domain_id "$_domain_id"
+
+  _info "Removing record"
+  _get_record "$_domain_id" "$_sub_domain"
+  if [ "$record_id" ]; then
+    if _azion_rest DELETE "intelligent_dns/$_domain_id/records/$record_id"; then
+      _info "Record removed."
+      return 0
+    else
+      _err "Failed to remove record."
+      return 1
+    fi
+  else
+    _info "Record not found or already removed."
+    return 0
+  fi
+}
+
+####################  Private functions below ##################################
+# Usage: _acme-challenge.www.domain.com
+# returns
+#  _sub_domain=_acme-challenge.www
+#  _domain=domain.com
+#  _domain_id=sdjkglgdfewsdfg
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  if ! _azion_rest GET "intelligent_dns"; then
+    return 1
+  fi
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      # not valid
+      return 1
+    fi
+
+    if _contains "$response" "\"domain\":\"$h\""; then
+      _domain_id=$(echo "$response" | tr '{' "\n" | grep "\"domain\":\"$h\"" | _egrep_o "\"id\":[0-9]*" | _head_n 1 | cut -d : -f 2 | tr -d \")
+      _debug _domain_id "$_domain_id"
+      if [ "$_domain_id" ]; then
+        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+        _domain=$h
+        return 0
+      fi
+      return 1
+    fi
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+_get_record() {
+  _domain_id=$1
+  _record=$2
+
+  if ! _azion_rest GET "intelligent_dns/$_domain_id/records"; then
+    return 1
+  fi
+
+  if _contains "$response" "\"entry\":\"$_record\""; then
+    _json_record=$(echo "$response" | tr '{' "\n" | grep "\"entry\":\"$_record\"")
+    if [ "$_json_record" ]; then
+      record_id=$(echo "$_json_record" | _egrep_o "\"record_id\":[0-9]*" | _head_n 1 | cut -d : -f 2 | tr -d \")
+      answers_list=$(echo "$_json_record" | _egrep_o "\"answers_list\":\[.*\]" | _head_n 1 | cut -d : -f 2 | tr -d \[\])
+      return 0
+    fi
+    return 1
+  fi
+  return 1
+}
+
+_get_token() {
+  AZION_Email="${AZION_Email:-$(_readaccountconf_mutable AZION_Email)}"
+  AZION_Password="${AZION_Password:-$(_readaccountconf_mutable AZION_Password)}"
+
+  if ! _contains "$AZION_Email" "@"; then
+    _err "It seems that the AZION_Email is not a valid email address. Revalidate your environments."
+    return 1
+  fi
+
+  if [ -z "$AZION_Email" ] || [ -z "$AZION_Password" ]; then
+    _err "You didn't specified a AZION_Email/AZION_Password to generate Azion token."
+    return 1
+  fi
+
+  _saveaccountconf_mutable AZION_Email "$AZION_Email"
+  _saveaccountconf_mutable AZION_Password "$AZION_Password"
+
+  _basic_auth=$(printf "%s:%s" "$AZION_Email" "$AZION_Password" | _base64)
+  _debug _basic_auth "$_basic_auth"
+
+  export _H1="Accept: application/json; version=3"
+  export _H2="Content-Type: application/json"
+  export _H3="Authorization: Basic $_basic_auth"
+
+  response="$(_post "" "$AZION_Api/tokens" "" "POST")"
+  if _contains "$response" "\"token\":\"" >/dev/null; then
+    _azion_token=$(echo "$response" | _egrep_o "\"token\":\"[^\"]*\"" | cut -d : -f 2 | tr -d \")
+    export AZION_Token="$_azion_token"
+  else
+    _err "Failed to generate Azion token"
+    return 1
+  fi
+}
+
+_azion_rest() {
+  _method=$1
+  _uri="$2"
+  _data="$3"
+
+  if [ -z "$AZION_Token" ]; then
+    _get_token
+  fi
+  _debug2 token "$AZION_Token"
+
+  export _H1="Accept: application/json; version=3"
+  export _H2="Content-Type: application/json"
+  export _H3="Authorization: token $AZION_Token"
+
+  if [ "$_method" != "GET" ]; then
+    _debug _data "$_data"
+    response="$(_post "$_data" "$AZION_Api/$_uri" "" "$_method")"
+  else
+    response="$(_get "$AZION_Api/$_uri")"
+  fi
+
+  _debug2 response "$response"
+
+  if [ "$?" != "0" ]; then
+    _err "error $_method $_uri $_data"
+    return 1
+  fi
+  return 0
+}

dnsapi/dns_azure.sh

@@ -9,57 +9,72 @@ WIKI="https://github.com/acmesh-official/acme.sh/wiki/How-to-use-Azure-DNS"
 #
 # Ref: https://docs.microsoft.com/en-us/rest/api/dns/recordsets/createorupdate
 #
+
 dns_azure_add() {
   fulldomain=$1
   txtvalue=$2
 
   AZUREDNS_SUBSCRIPTIONID="${AZUREDNS_SUBSCRIPTIONID:-$(_readaccountconf_mutable AZUREDNS_SUBSCRIPTIONID)}"
-  AZUREDNS_TENANTID="${AZUREDNS_TENANTID:-$(_readaccountconf_mutable AZUREDNS_TENANTID)}"
-  AZUREDNS_APPID="${AZUREDNS_APPID:-$(_readaccountconf_mutable AZUREDNS_APPID)}"
-  AZUREDNS_CLIENTSECRET="${AZUREDNS_CLIENTSECRET:-$(_readaccountconf_mutable AZUREDNS_CLIENTSECRET)}"
-
   if [ -z "$AZUREDNS_SUBSCRIPTIONID" ]; then
     AZUREDNS_SUBSCRIPTIONID=""
     AZUREDNS_TENANTID=""
     AZUREDNS_APPID=""
     AZUREDNS_CLIENTSECRET=""
-    _err "You didn't specify the Azure Subscription ID "
+    _err "You didn't specify the Azure Subscription ID"
     return 1
   fi
+  #save subscription id to account conf file.
+  _saveaccountconf_mutable AZUREDNS_SUBSCRIPTIONID "$AZUREDNS_SUBSCRIPTIONID"
 
-  if [ -z "$AZUREDNS_TENANTID" ]; then
-    AZUREDNS_SUBSCRIPTIONID=""
-    AZUREDNS_TENANTID=""
-    AZUREDNS_APPID=""
-    AZUREDNS_CLIENTSECRET=""
-    _err "You didn't specify the Azure Tenant ID "
-    return 1
-  fi
+  AZUREDNS_MANAGEDIDENTITY="${AZUREDNS_MANAGEDIDENTITY:-$(_readaccountconf_mutable AZUREDNS_MANAGEDIDENTITY)}"
+  if [ "$AZUREDNS_MANAGEDIDENTITY" = true ]; then
+    _info "Using Azure managed identity"
+    #save managed identity as preferred authentication method, clear service principal credentials from conf file.
+    _saveaccountconf_mutable AZUREDNS_MANAGEDIDENTITY "$AZUREDNS_MANAGEDIDENTITY"
+    _saveaccountconf_mutable AZUREDNS_TENANTID ""
+    _saveaccountconf_mutable AZUREDNS_APPID ""
+    _saveaccountconf_mutable AZUREDNS_CLIENTSECRET ""
+  else
+    _info "You didn't ask to use Azure managed identity, checking service principal credentials"
+    AZUREDNS_TENANTID="${AZUREDNS_TENANTID:-$(_readaccountconf_mutable AZUREDNS_TENANTID)}"
+    AZUREDNS_APPID="${AZUREDNS_APPID:-$(_readaccountconf_mutable AZUREDNS_APPID)}"
+    AZUREDNS_CLIENTSECRET="${AZUREDNS_CLIENTSECRET:-$(_readaccountconf_mutable AZUREDNS_CLIENTSECRET)}"
+
+    if [ -z "$AZUREDNS_TENANTID" ]; then
+      AZUREDNS_SUBSCRIPTIONID=""
+      AZUREDNS_TENANTID=""
+      AZUREDNS_APPID=""
+      AZUREDNS_CLIENTSECRET=""
+      _err "You didn't specify the Azure Tenant ID "
+      return 1
+    fi
 
-  if [ -z "$AZUREDNS_APPID" ]; then
-    AZUREDNS_SUBSCRIPTIONID=""
-    AZUREDNS_TENANTID=""
-    AZUREDNS_APPID=""
-    AZUREDNS_CLIENTSECRET=""
-    _err "You didn't specify the Azure App ID"
-    return 1
-  fi
+    if [ -z "$AZUREDNS_APPID" ]; then
+      AZUREDNS_SUBSCRIPTIONID=""
+      AZUREDNS_TENANTID=""
+      AZUREDNS_APPID=""
+      AZUREDNS_CLIENTSECRET=""
+      _err "You didn't specify the Azure App ID"
+      return 1
+    fi
 
-  if [ -z "$AZUREDNS_CLIENTSECRET" ]; then
-    AZUREDNS_SUBSCRIPTIONID=""
-    AZUREDNS_TENANTID=""
-    AZUREDNS_APPID=""
-    AZUREDNS_CLIENTSECRET=""
-    _err "You didn't specify the Azure Client Secret"
-    return 1
+    if [ -z "$AZUREDNS_CLIENTSECRET" ]; then
+      AZUREDNS_SUBSCRIPTIONID=""
+      AZUREDNS_TENANTID=""
+      AZUREDNS_APPID=""
+      AZUREDNS_CLIENTSECRET=""
+      _err "You didn't specify the Azure Client Secret"
+      return 1
+    fi
+
+    #save account details to account conf file, don't opt in for azure manages identity check.
+    _saveaccountconf_mutable AZUREDNS_MANAGEDIDENTITY "false"
+    _saveaccountconf_mutable AZUREDNS_TENANTID "$AZUREDNS_TENANTID"
+    _saveaccountconf_mutable AZUREDNS_APPID "$AZUREDNS_APPID"
+    _saveaccountconf_mutable AZUREDNS_CLIENTSECRET "$AZUREDNS_CLIENTSECRET"
   fi
-  #save account details to account conf file.
-  _saveaccountconf_mutable AZUREDNS_SUBSCRIPTIONID "$AZUREDNS_SUBSCRIPTIONID"
-  _saveaccountconf_mutable AZUREDNS_TENANTID "$AZUREDNS_TENANTID"
-  _saveaccountconf_mutable AZUREDNS_APPID "$AZUREDNS_APPID"
-  _saveaccountconf_mutable AZUREDNS_CLIENTSECRET "$AZUREDNS_CLIENTSECRET"
 
-  accesstoken=$(_azure_getaccess_token "$AZUREDNS_TENANTID" "$AZUREDNS_APPID" "$AZUREDNS_CLIENTSECRET")
+  accesstoken=$(_azure_getaccess_token "$AZUREDNS_MANAGEDIDENTITY" "$AZUREDNS_TENANTID" "$AZUREDNS_APPID" "$AZUREDNS_CLIENTSECRET")
 
   if ! _get_root "$fulldomain" "$AZUREDNS_SUBSCRIPTIONID" "$accesstoken"; then
     _err "invalid domain"
@@ -116,10 +131,6 @@ dns_azure_rm() {
   txtvalue=$2
 
   AZUREDNS_SUBSCRIPTIONID="${AZUREDNS_SUBSCRIPTIONID:-$(_readaccountconf_mutable AZUREDNS_SUBSCRIPTIONID)}"
-  AZUREDNS_TENANTID="${AZUREDNS_TENANTID:-$(_readaccountconf_mutable AZUREDNS_TENANTID)}"
-  AZUREDNS_APPID="${AZUREDNS_APPID:-$(_readaccountconf_mutable AZUREDNS_APPID)}"
-  AZUREDNS_CLIENTSECRET="${AZUREDNS_CLIENTSECRET:-$(_readaccountconf_mutable AZUREDNS_CLIENTSECRET)}"
-
   if [ -z "$AZUREDNS_SUBSCRIPTIONID" ]; then
     AZUREDNS_SUBSCRIPTIONID=""
     AZUREDNS_TENANTID=""
@@ -129,34 +140,44 @@ dns_azure_rm() {
     return 1
   fi
 
-  if [ -z "$AZUREDNS_TENANTID" ]; then
-    AZUREDNS_SUBSCRIPTIONID=""
-    AZUREDNS_TENANTID=""
-    AZUREDNS_APPID=""
-    AZUREDNS_CLIENTSECRET=""
-    _err "You didn't specify the Azure Tenant ID "
-    return 1
-  fi
+  AZUREDNS_MANAGEDIDENTITY="${AZUREDNS_MANAGEDIDENTITY:-$(_readaccountconf_mutable AZUREDNS_MANAGEDIDENTITY)}"
+  if [ "$AZUREDNS_MANAGEDIDENTITY" = true ]; then
+    _info "Using Azure managed identity"
+  else
+    _info "You didn't ask to use Azure managed identity, checking service principal credentials"
+    AZUREDNS_TENANTID="${AZUREDNS_TENANTID:-$(_readaccountconf_mutable AZUREDNS_TENANTID)}"
+    AZUREDNS_APPID="${AZUREDNS_APPID:-$(_readaccountconf_mutable AZUREDNS_APPID)}"
+    AZUREDNS_CLIENTSECRET="${AZUREDNS_CLIENTSECRET:-$(_readaccountconf_mutable AZUREDNS_CLIENTSECRET)}"
+
+    if [ -z "$AZUREDNS_TENANTID" ]; then
+      AZUREDNS_SUBSCRIPTIONID=""
+      AZUREDNS_TENANTID=""
+      AZUREDNS_APPID=""
+      AZUREDNS_CLIENTSECRET=""
+      _err "You didn't specify the Azure Tenant ID "
+      return 1
+    fi
 
-  if [ -z "$AZUREDNS_APPID" ]; then
-    AZUREDNS_SUBSCRIPTIONID=""
-    AZUREDNS_TENANTID=""
-    AZUREDNS_APPID=""
-    AZUREDNS_CLIENTSECRET=""
-    _err "You didn't specify the Azure App ID"
-    return 1
-  fi
+    if [ -z "$AZUREDNS_APPID" ]; then
+      AZUREDNS_SUBSCRIPTIONID=""
+      AZUREDNS_TENANTID=""
+      AZUREDNS_APPID=""
+      AZUREDNS_CLIENTSECRET=""
+      _err "You didn't specify the Azure App ID"
+      return 1
+    fi
 
-  if [ -z "$AZUREDNS_CLIENTSECRET" ]; then
-    AZUREDNS_SUBSCRIPTIONID=""
-    AZUREDNS_TENANTID=""
-    AZUREDNS_APPID=""
-    AZUREDNS_CLIENTSECRET=""
-    _err "You didn't specify the Azure Client Secret"
-    return 1
+    if [ -z "$AZUREDNS_CLIENTSECRET" ]; then
+      AZUREDNS_SUBSCRIPTIONID=""
+      AZUREDNS_TENANTID=""
+      AZUREDNS_APPID=""
+      AZUREDNS_CLIENTSECRET=""
+      _err "You didn't specify the Azure Client Secret"
+      return 1
+    fi
   fi
 
-  accesstoken=$(_azure_getaccess_token "$AZUREDNS_TENANTID" "$AZUREDNS_APPID" "$AZUREDNS_CLIENTSECRET")
+  accesstoken=$(_azure_getaccess_token "$AZUREDNS_MANAGEDIDENTITY" "$AZUREDNS_TENANTID" "$AZUREDNS_APPID" "$AZUREDNS_CLIENTSECRET")
 
   if ! _get_root "$fulldomain" "$AZUREDNS_SUBSCRIPTIONID" "$accesstoken"; then
     _err "invalid domain"
@@ -258,9 +279,10 @@ _azure_rest() {
 
 ## Ref: https://docs.microsoft.com/en-us/azure/active-directory/develop/active-directory-protocols-oauth-service-to-service#request-an-access-token
 _azure_getaccess_token() {
-  tenantID=$1
-  clientID=$2
-  clientSecret=$3
+  managedIdentity=$1
+  tenantID=$2
+  clientID=$3
+  clientSecret=$4
 
   accesstoken="${AZUREDNS_BEARERTOKEN:-$(_readaccountconf_mutable AZUREDNS_BEARERTOKEN)}"
   expires_on="${AZUREDNS_TOKENVALIDTO:-$(_readaccountconf_mutable AZUREDNS_TOKENVALIDTO)}"
@@ -278,17 +300,25 @@ _azure_getaccess_token() {
   fi
   _debug "getting new bearer token"
 
-  export _H1="accept: application/json"
-  export _H2="Content-Type: application/x-www-form-urlencoded"
-
-  body="resource=$(printf "%s" 'https://management.core.windows.net/' | _url_encode)&client_id=$(printf "%s" "$clientID" | _url_encode)&client_secret=$(printf "%s" "$clientSecret" | _url_encode)&grant_type=client_credentials"
-  _secure_debug2 "data $body"
-  response="$(_post "$body" "https://login.microsoftonline.com/$tenantID/oauth2/token" "" "POST")"
-  _ret="$?"
-  _secure_debug2 "response $response"
-  response="$(echo "$response" | _normalizeJson)"
-  accesstoken=$(echo "$response" | _egrep_o "\"access_token\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
-  expires_on=$(echo "$response" | _egrep_o "\"expires_on\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
+  if [ "$managedIdentity" = true ]; then
+    # https://docs.microsoft.com/en-us/azure/active-directory/managed-identities-azure-resources/how-to-use-vm-token#get-a-token-using-http
+    export _H1="Metadata: true"
+    response="$(_get http://169.254.169.254/metadata/identity/oauth2/token\?api-version=2018-02-01\&resource=https://management.azure.com/)"
+    response="$(echo "$response" | _normalizeJson)"
+    accesstoken=$(echo "$response" | _egrep_o "\"access_token\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
+    expires_on=$(echo "$response" | _egrep_o "\"expires_on\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
+  else
+    export _H1="accept: application/json"
+    export _H2="Content-Type: application/x-www-form-urlencoded"
+    body="resource=$(printf "%s" 'https://management.core.windows.net/' | _url_encode)&client_id=$(printf "%s" "$clientID" | _url_encode)&client_secret=$(printf "%s" "$clientSecret" | _url_encode)&grant_type=client_credentials"
+    _secure_debug2 "data $body"
+    response="$(_post "$body" "https://login.microsoftonline.com/$tenantID/oauth2/token" "" "POST")"
+    _ret="$?"
+    _secure_debug2 "response $response"
+    response="$(echo "$response" | _normalizeJson)"
+    accesstoken=$(echo "$response" | _egrep_o "\"access_token\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
+    expires_on=$(echo "$response" | _egrep_o "\"expires_on\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
+  fi
 
   if [ -z "$accesstoken" ]; then
     _err "no acccess token received. Check your Azure settings see $WIKI"

dnsapi/dns_bunny.sh

@@ -0,0 +1,248 @@
+#!/usr/bin/env sh
+
+## Will be called by acme.sh to add the TXT record via the Bunny DNS API.
+## returns 0 means success, otherwise error.
+
+## Author: nosilver4u <nosilver4u at ewww.io>
+## GitHub: https://github.com/nosilver4u/acme.sh
+
+##
+## Environment Variables Required:
+##
+## BUNNY_API_KEY="75310dc4-ca77-9ac3-9a19-f6355db573b49ce92ae1-2655-3ebd-61ac-3a3ae34834cc"
+##
+
+#####################  Public functions  #####################
+
+## Create the text record for validation.
+## Usage: fulldomain txtvalue
+## EG: "_acme-challenge.www.other.domain.com" "XKrxpRBosdq0HG9i01zxXp5CPBs"
+dns_bunny_add() {
+  fulldomain="$(echo "$1" | _lower_case)"
+  txtvalue=$2
+
+  BUNNY_API_KEY="${BUNNY_API_KEY:-$(_readaccountconf_mutable BUNNY_API_KEY)}"
+  # Check if API Key is set
+  if [ -z "$BUNNY_API_KEY" ]; then
+    BUNNY_API_KEY=""
+    _err "You did not specify Bunny.net API key."
+    _err "Please export BUNNY_API_KEY and try again."
+    return 1
+  fi
+
+  _info "Using Bunny.net dns validation - add record"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  ## save the env vars (key and domain split location) for later automated use
+  _saveaccountconf_mutable BUNNY_API_KEY "$BUNNY_API_KEY"
+
+  ## split the domain for Bunny API
+  if ! _get_base_domain "$fulldomain"; then
+    _err "domain not found in your account for addition"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+  _debug _domain_id "$_domain_id"
+
+  ## Set the header with our post type and auth key
+  export _H1="Accept: application/json"
+  export _H2="AccessKey: $BUNNY_API_KEY"
+  export _H3="Content-Type: application/json"
+  PURL="https://api.bunny.net/dnszone/$_domain_id/records"
+  PBODY='{"Id":'$_domain_id',"Type":3,"Name":"'$_sub_domain'","Value":"'$txtvalue'","ttl":120}'
+
+  _debug PURL "$PURL"
+  _debug PBODY "$PBODY"
+
+  ## the create request - POST
+  ## args: BODY, URL, [need64, httpmethod]
+  response="$(_post "$PBODY" "$PURL" "" "PUT")"
+
+  ## check response
+  if [ "$?" != "0" ]; then
+    _err "error in response: $response"
+    return 1
+  fi
+  _debug2 response "$response"
+
+  ## finished correctly
+  return 0
+}
+
+## Remove the txt record after validation.
+## Usage: fulldomain txtvalue
+## EG: "_acme-challenge.www.other.domain.com" "XKrxpRBosdq0HG9i01zxXp5CPBs"
+dns_bunny_rm() {
+  fulldomain="$(echo "$1" | _lower_case)"
+  txtvalue=$2
+
+  BUNNY_API_KEY="${BUNNY_API_KEY:-$(_readaccountconf_mutable BUNNY_API_KEY)}"
+  # Check if API Key Exists
+  if [ -z "$BUNNY_API_KEY" ]; then
+    BUNNY_API_KEY=""
+    _err "You did not specify Bunny.net API key."
+    _err "Please export BUNNY_API_KEY and try again."
+    return 1
+  fi
+
+  _info "Using Bunny.net dns validation - remove record"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  ## split the domain for Bunny API
+  if ! _get_base_domain "$fulldomain"; then
+    _err "Domain not found in your account for TXT record removal"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+  _debug _domain_id "$_domain_id"
+
+  ## Set the header with our post type and key auth key
+  export _H1="Accept: application/json"
+  export _H2="AccessKey: $BUNNY_API_KEY"
+  ## get URL for the list of DNS records
+  GURL="https://api.bunny.net/dnszone/$_domain_id"
+
+  ## 1) Get the domain/zone records
+  ## the fetch request - GET
+  ## args: URL, [onlyheader, timeout]
+  domain_list="$(_get "$GURL")"
+
+  ## check response
+  if [ "$?" != "0" ]; then
+    _err "error in domain_list response: $domain_list"
+    return 1
+  fi
+  _debug2 domain_list "$domain_list"
+
+  ## 2) search through records
+  ## check for what we are looking for: "Type":3,"Value":"$txtvalue","Name":"$_sub_domain"
+  record="$(echo "$domain_list" | _egrep_o "\"Id\"\s*\:\s*\"*[0-9]+\"*,\s*\"Type\"[^}]*\"Value\"\s*\:\s*\"$txtvalue\"[^}]*\"Name\"\s*\:\s*\"$_sub_domain\"")"
+
+  if [ -n "$record" ]; then
+
+    ## We found records
+    rec_ids="$(echo "$record" | _egrep_o "Id\"\s*\:\s*\"*[0-9]+" | _egrep_o "[0-9]+")"
+    _debug rec_ids "$rec_ids"
+    if [ -n "$rec_ids" ]; then
+      echo "$rec_ids" | while IFS= read -r rec_id; do
+        ## delete the record
+        ## delete URL for removing the one we dont want
+        DURL="https://api.bunny.net/dnszone/$_domain_id/records/$rec_id"
+
+        ## the removal request - DELETE
+        ## args: BODY, URL, [need64, httpmethod]
+        response="$(_post "" "$DURL" "" "DELETE")"
+
+        ## check response (sort of)
+        if [ "$?" != "0" ]; then
+          _err "error in remove response: $response"
+          return 1
+        fi
+        _debug2 response "$response"
+
+      done
+    fi
+  fi
+
+  ## finished correctly
+  return 0
+}
+
+#####################  Private functions below  #####################
+
+## Split the domain provided into the "base domain" and the "start prefix".
+## This function searches for the longest subdomain in your account
+## for the full domain given and splits it into the base domain (zone)
+## and the prefix/record to be added/removed
+## USAGE: fulldomain
+## EG: "_acme-challenge.two.three.four.domain.com"
+## returns
+## _sub_domain="_acme-challenge.two"
+## _domain="three.four.domain.com" *IF* zone "three.four.domain.com" exists
+## _domain_id=234
+## if only "domain.com" exists it will return
+## _sub_domain="_acme-challenge.two.three.four"
+## _domain="domain.com"
+## _domain_id=234
+_get_base_domain() {
+  # args
+  fulldomain="$(echo "$1" | _lower_case)"
+  _debug fulldomain "$fulldomain"
+
+  # domain max legal length = 253
+  MAX_DOM=255
+  page=1
+
+  ## get a list of domains for the account to check thru
+  ## Set the headers
+  export _H1="Accept: application/json"
+  export _H2="AccessKey: $BUNNY_API_KEY"
+  _debug BUNNY_API_KEY "$BUNNY_API_KEY"
+  ## get URL for the list of domains
+  ## may get: "links":{"pages":{"last":".../v2/domains/DOM/records?page=2","next":".../v2/domains/DOM/records?page=2"}}
+  DOMURL="https://api.bunny.net/dnszone"
+
+  ## while we dont have a matching domain we keep going
+  while [ -z "$found" ]; do
+    ## get the domain list (current page)
+    domain_list="$(_get "$DOMURL")"
+
+    ## check response
+    if [ "$?" != "0" ]; then
+      _err "error in domain_list response: $domain_list"
+      return 1
+    fi
+    _debug2 domain_list "$domain_list"
+
+    i=1
+    while [ $i -gt 0 ]; do
+      ## get next longest domain
+      _domain=$(printf "%s" "$fulldomain" | cut -d . -f "$i"-"$MAX_DOM")
+      ## check we got something back from our cut (or are we at the end)
+      if [ -z "$_domain" ]; then
+        break
+      fi
+      ## we got part of a domain back - grep it out
+      found="$(echo "$domain_list" | _egrep_o "\"Id\"\s*:\s*\"*[0-9]+\"*,\s*\"Domain\"\s*\:\s*\"$_domain\"")"
+      ## check if it exists
+      if [ -n "$found" ]; then
+        ## exists - exit loop returning the parts
+        sub_point=$(_math $i - 1)
+        _sub_domain=$(printf "%s" "$fulldomain" | cut -d . -f 1-"$sub_point")
+        _domain_id="$(echo "$found" | _egrep_o "Id\"\s*\:\s*\"*[0-9]+" | _egrep_o "[0-9]+")"
+        _debug _domain_id "$_domain_id"
+        _debug _domain "$_domain"
+        _debug _sub_domain "$_sub_domain"
+        found=""
+        return 0
+      fi
+      ## increment cut point $i
+      i=$(_math $i + 1)
+    done
+
+    if [ -z "$found" ]; then
+      page=$(_math $page + 1)
+      nextpage="https://api.bunny.net/dnszone?page=$page"
+      ## Find the next page if we don't have a match.
+      hasnextpage="$(echo "$domain_list" | _egrep_o "\"HasMoreItems\"\s*:\s*true")"
+      if [ -z "$hasnextpage" ]; then
+        _err "No record and no nextpage in Bunny.net domain search."
+        found=""
+        return 1
+      fi
+      _debug2 nextpage "$nextpage"
+      DOMURL="$nextpage"
+    fi
+
+  done
+
+  ## We went through the entire domain zone list and didn't find one that matched.
+  ## If we ever get here, something is broken in the code...
+  _err "Domain not found in Bunny.net account, but we should never get here!"
+  found=""
+  return 1
+}

dnsapi/dns_cf.sh

@@ -25,9 +25,16 @@ dns_cf_add() {
   CF_Email="${CF_Email:-$(_readaccountconf_mutable CF_Email)}"
 
   if [ "$CF_Token" ]; then
-    _saveaccountconf_mutable CF_Token "$CF_Token"
-    _saveaccountconf_mutable CF_Account_ID "$CF_Account_ID"
-    _saveaccountconf_mutable CF_Zone_ID "$CF_Zone_ID"
+    if [ "$CF_Zone_ID" ]; then
+      _savedomainconf CF_Token "$CF_Token"
+      _savedomainconf CF_Account_ID "$CF_Account_ID"
+      _savedomainconf CF_Zone_ID "$CF_Zone_ID"
+    else
+      _saveaccountconf_mutable CF_Token "$CF_Token"
+      _saveaccountconf_mutable CF_Account_ID "$CF_Account_ID"
+      _clearaccountconf_mutable CF_Zone_ID
+      _clearaccountconf CF_Zone_ID
+    fi
   else
     if [ -z "$CF_Key" ] || [ -z "$CF_Email" ]; then
       CF_Key=""
@@ -45,6 +52,14 @@ dns_cf_add() {
     #save the api key and email to the account conf file.
     _saveaccountconf_mutable CF_Key "$CF_Key"
     _saveaccountconf_mutable CF_Email "$CF_Email"
+
+    _clearaccountconf_mutable CF_Token
+    _clearaccountconf_mutable CF_Account_ID
+    _clearaccountconf_mutable CF_Zone_ID
+    _clearaccountconf CF_Token
+    _clearaccountconf CF_Account_ID
+    _clearaccountconf CF_Zone_ID
+
   fi
 
   _debug "First detect the root zone"

dnsapi/dns_cloudns.sh

@@ -2,11 +2,14 @@
 
 # Author: Boyan Peychev <boyan at cloudns dot net>
 # Repository: https://github.com/ClouDNS/acme.sh/
+# Editor: I Komang Suryadana
 
 #CLOUDNS_AUTH_ID=XXXXX
 #CLOUDNS_SUB_AUTH_ID=XXXXX
 #CLOUDNS_AUTH_PASSWORD="YYYYYYYYY"
 CLOUDNS_API="https://api.cloudns.net"
+DOMAIN_TYPE=
+DOMAIN_MASTER=
 
 ########  Public functions #####################
 
@@ -61,12 +64,21 @@ dns_cloudns_rm() {
   host="$(echo "$1" | sed "s/\.$zone\$//")"
   record=$2
 
+  _dns_cloudns_get_zone_info "$zone"
+
+  _debug "Type" "$DOMAIN_TYPE"
+  _debug "Cloud Master" "$DOMAIN_MASTER"
+  if _contains "$DOMAIN_TYPE" "cloud"; then
+    zone=$DOMAIN_MASTER
+  fi
+  _debug "ZONE" "$zone"
+
   _dns_cloudns_http_api_call "dns/records.json" "domain-name=$zone&host=$host&type=TXT"
   if ! _contains "$response" "\"id\":"; then
     return 1
   fi
 
-  for i in $(echo "$response" | tr '{' "\n" | grep "$record"); do
+  for i in $(echo "$response" | tr '{' "\n" | grep -- "$record"); do
     record_id=$(echo "$i" | tr ',' "\n" | grep -E '^"id"' | sed -re 's/^\"id\"\:\"([0-9]+)\"$/\1/g')
 
     if [ -n "$record_id" ]; then
@@ -134,6 +146,18 @@ _dns_cloudns_init_check() {
   return 0
 }
 
+_dns_cloudns_get_zone_info() {
+  zone=$1
+  _dns_cloudns_http_api_call "dns/get-zone-info.json" "domain-name=$zone"
+  if ! _contains "$response" "\"status\":\"Failed\""; then
+    DOMAIN_TYPE=$(echo "$response" | _egrep_o '"type":"[^"]*"' | cut -d : -f 2 | tr -d '"')
+    if _contains "$DOMAIN_TYPE" "cloud"; then
+      DOMAIN_MASTER=$(echo "$response" | _egrep_o '"cloud-master":"[^"]*"' | cut -d : -f 2 | tr -d '"')
+    fi
+  fi
+  return 0
+}
+
 _dns_cloudns_get_zone_name() {
   i=2
   while true; do

dnsapi/dns_constellix.sh

@@ -30,16 +30,41 @@ dns_constellix_add() {
     return 1
   fi
 
-  _info "Adding TXT record"
-  if _constellix_rest POST "domains/${_domain_id}/records" "[{\"type\":\"txt\",\"add\":true,\"set\":{\"name\":\"${_sub_domain}\",\"ttl\":120,\"roundRobin\":[{\"value\":\"${txtvalue}\"}]}}]"; then
-    if printf -- "%s" "$response" | grep "{\"success\":\"1 record(s) added, 0 record(s) updated, 0 record(s) deleted\"}" >/dev/null; then
-      _info "Added"
-      return 0
+  # The TXT record might already exist when working with wildcard certificates. In that case, update the record by adding the new value.
+  _debug "Search TXT record"
+  if _constellix_rest GET "domains/${_domain_id}/records/TXT/search?exact=${_sub_domain}"; then
+    if printf -- "%s" "$response" | grep "{\"errors\":\[\"Requested record was not found\"\]}" >/dev/null; then
+      _info "Adding TXT record"
+      if _constellix_rest POST "domains/${_domain_id}/records" "[{\"type\":\"txt\",\"add\":true,\"set\":{\"name\":\"${_sub_domain}\",\"ttl\":60,\"roundRobin\":[{\"value\":\"${txtvalue}\"}]}}]"; then
+        if printf -- "%s" "$response" | grep "{\"success\":\"1 record(s) added, 0 record(s) updated, 0 record(s) deleted\"}" >/dev/null; then
+          _info "Added"
+          return 0
+        else
+          _err "Error adding TXT record"
+        fi
+      fi
     else
-      _err "Error adding TXT record"
-      return 1
+      _record_id=$(printf "%s\n" "$response" | _egrep_o "\"id\":[0-9]*" | cut -d ':' -f 2)
+      if _constellix_rest GET "domains/${_domain_id}/records/TXT/${_record_id}"; then
+        _new_rr_values=$(printf "%s\n" "$response" | _egrep_o '"roundRobin":\[[^]]*\]' | sed "s/\]$/,{\"value\":\"${txtvalue}\"}]/")
+        _debug _new_rr_values "$_new_rr_values"
+        _info "Updating TXT record"
+        if _constellix_rest PUT "domains/${_domain_id}/records/TXT/${_record_id}" "{\"name\":\"${_sub_domain}\",\"ttl\":60,${_new_rr_values}}"; then
+          if printf -- "%s" "$response" | grep "{\"success\":\"Record.*updated successfully\"}" >/dev/null; then
+            _info "Updated"
+            return 0
+          elif printf -- "%s" "$response" | grep "{\"errors\":\[\"Contents are identical\"\]}" >/dev/null; then
+            _info "Already exists, no need to update"
+            return 0
+          else
+            _err "Error updating TXT record"
+          fi
+        fi
+      fi
     fi
   fi
+
+  return 1
 }
 
 # Usage: fulldomain txtvalue
@@ -61,16 +86,26 @@ dns_constellix_rm() {
     return 1
   fi
 
-  _info "Removing TXT record"
-  if _constellix_rest POST "domains/${_domain_id}/records" "[{\"type\":\"txt\",\"delete\":true,\"filter\":{\"field\":\"name\",\"op\":\"eq\",\"value\":\"${_sub_domain}\"}}]"; then
-    if printf -- "%s" "$response" | grep "{\"success\":\"0 record(s) added, 0 record(s) updated, 1 record(s) deleted\"}" >/dev/null; then
+  # The TXT record might have been removed already when working with some wildcard certificates.
+  _debug "Search TXT record"
+  if _constellix_rest GET "domains/${_domain_id}/records/TXT/search?exact=${_sub_domain}"; then
+    if printf -- "%s" "$response" | grep "{\"errors\":\[\"Requested record was not found\"\]}" >/dev/null; then
       _info "Removed"
       return 0
     else
-      _err "Error removing TXT record"
-      return 1
+      _info "Removing TXT record"
+      if _constellix_rest POST "domains/${_domain_id}/records" "[{\"type\":\"txt\",\"delete\":true,\"filter\":{\"field\":\"name\",\"op\":\"eq\",\"value\":\"${_sub_domain}\"}}]"; then
+        if printf -- "%s" "$response" | grep "{\"success\":\"0 record(s) added, 0 record(s) updated, 1 record(s) deleted\"}" >/dev/null; then
+          _info "Removed"
+          return 0
+        else
+          _err "Error removing TXT record"
+        fi
+      fi
     fi
   fi
+
+  return 1
 }
 
 ####################  Private functions below ##################################
@@ -91,7 +126,7 @@ _get_root() {
     fi
 
     if _contains "$response" "\"name\":\"$h\""; then
-      _domain_id=$(printf "%s\n" "$response" | _egrep_o "\"id\":[0-9]+" | cut -d ':' -f 2)
+      _domain_id=$(printf "%s\n" "$response" | _egrep_o "\"id\":[0-9]*" | cut -d ':' -f 2)
       if [ "$_domain_id" ]; then
         _sub_domain=$(printf "%s" "$domain" | cut -d '.' -f 1-$p)
         _domain="$h"

dnsapi/dns_cpanel.sh

@@ -0,0 +1,160 @@
+#!/usr/bin/env sh
+#
+#Author: Bjarne Saltbaek
+#Report Bugs here: https://github.com/acmesh-official/acme.sh/issues/3732
+#
+#
+########  Public functions #####################
+#
+# Export CPANEL username,api token and hostname in the following variables
+#
+# cPanel_Username=username
+# cPanel_Apitoken=apitoken
+# cPanel_Hostname=hostname
+#
+# Usage: add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+
+# Used to add txt record
+dns_cpanel_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Adding TXT record to cPanel based system"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+  _debug cPanel_Username "$cPanel_Username"
+  _debug cPanel_Apitoken "$cPanel_Apitoken"
+  _debug cPanel_Hostname "$cPanel_Hostname"
+
+  if ! _cpanel_login; then
+    _err "cPanel Login failed for user $cPanel_Username. Check $HTTP_HEADER file"
+    return 1
+  fi
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "No matching root domain for $fulldomain found"
+    return 1
+  fi
+  # adding entry
+  _info "Adding the entry"
+  stripped_fulldomain=$(echo "$fulldomain" | sed "s/.$_domain//")
+  _debug "Adding $stripped_fulldomain to $_domain zone"
+  _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=add_zone_record&domain=$_domain&name=$stripped_fulldomain&type=TXT&txtdata=$txtvalue&ttl=1"
+  if _successful_update; then return 0; fi
+  _err "Couldn't create entry!"
+  return 1
+}
+
+# Usage: fulldomain txtvalue
+# Used to remove the txt record after validation
+dns_cpanel_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using cPanel based system"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _cpanel_login; then
+    _err "cPanel Login failed for user $cPanel_Username. Check $HTTP_HEADER file"
+    return 1
+  fi
+
+  if ! _get_root; then
+    _err "No matching root domain for $fulldomain found"
+    return 1
+  fi
+
+  _findentry "$fulldomain" "$txtvalue"
+  if [ -z "$_id" ]; then
+    _info "Entry doesn't exist, nothing to delete"
+    return 0
+  fi
+  _debug "Deleting record..."
+  _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=remove_zone_record&domain=$_domain&line=$_id"
+  # removing entry
+  _debug "_result is: $_result"
+
+  if _successful_update; then return 0; fi
+  _err "Couldn't delete entry!"
+  return 1
+}
+
+####################  Private functions below ##################################
+
+_checkcredentials() {
+  cPanel_Username="${cPanel_Username:-$(_readaccountconf_mutable cPanel_Username)}"
+  cPanel_Apitoken="${cPanel_Apitoken:-$(_readaccountconf_mutable cPanel_Apitoken)}"
+  cPanel_Hostname="${cPanel_Hostname:-$(_readaccountconf_mutable cPanel_Hostname)}"
+
+  if [ -z "$cPanel_Username" ] || [ -z "$cPanel_Apitoken" ] || [ -z "$cPanel_Hostname" ]; then
+    cPanel_Username=""
+    cPanel_Apitoken=""
+    cPanel_Hostname=""
+    _err "You haven't specified cPanel username, apitoken and hostname yet."
+    _err "Please add credentials and try again."
+    return 1
+  fi
+  #save the credentials to the account conf file.
+  _saveaccountconf_mutable cPanel_Username "$cPanel_Username"
+  _saveaccountconf_mutable cPanel_Apitoken "$cPanel_Apitoken"
+  _saveaccountconf_mutable cPanel_Hostname "$cPanel_Hostname"
+  return 0
+}
+
+_cpanel_login() {
+  if ! _checkcredentials; then return 1; fi
+
+  if ! _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=CustInfo&cpanel_jsonapi_func=displaycontactinfo"; then
+    _err "cPanel login failed for user $cPanel_Username."
+    return 1
+  fi
+  return 0
+}
+
+_myget() {
+  #Adds auth header to request
+  export _H1="Authorization: cpanel $cPanel_Username:$cPanel_Apitoken"
+  _result=$(_get "$cPanel_Hostname/$1")
+}
+
+_get_root() {
+  _myget 'json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=fetchzones'
+  _domains=$(echo "$_result" | _egrep_o '"[a-z0-9\.\-]*":\["; cPanel first' | cut -d':' -f1 | sed 's/"//g' | sed 's/{//g')
+  _debug "_result is: $_result"
+  _debug "_domains is: $_domains"
+  if [ -z "$_domains" ]; then
+    _err "Primary domain list not found!"
+    return 1
+  fi
+  for _domain in $_domains; do
+    _debug "Checking if $fulldomain ends with $_domain"
+    if (_endswith "$fulldomain" "$_domain"); then
+      _debug "Root domain: $_domain"
+      return 0
+    fi
+  done
+  return 1
+}
+
+_successful_update() {
+  if (echo "$_result" | _egrep_o 'data":\[[^]]*]' | grep -q '"newserial":null'); then return 1; fi
+  return 0
+}
+
+_findentry() {
+  _debug "In _findentry"
+  #returns id of dns entry, if it exists
+  _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=fetchzone_records&domain=$_domain"
+  _id=$(echo "$_result" | sed -e "s/},{/},\n{/g" | grep "$fulldomain" | grep "$txtvalue" | _egrep_o 'line":[0-9]+' | cut -d ':' -f 2)
+  _debug "_result is: $_result"
+  _debug "fulldomain. is $fulldomain."
+  _debug "txtvalue is $txtvalue"
+  _debug "_id is: $_id"
+  if [ -n "$_id" ]; then
+    _debug "Entry found with _id=$_id"
+    return 0
+  fi
+  return 1
+}

dnsapi/dns_curanet.sh

@@ -0,0 +1,159 @@
+#!/usr/bin/env sh
+
+#Script to use with curanet.dk, scannet.dk, wannafind.dk, dandomain.dk DNS management.
+#Requires api credentials with scope: dns
+#Author: Peter L. Hansen <[email protected]>
+#Version 1.0
+
+CURANET_REST_URL="https://api.curanet.dk/dns/v1/Domains"
+CURANET_AUTH_URL="https://apiauth.dk.team.blue/auth/realms/Curanet/protocol/openid-connect/token"
+CURANET_ACCESS_TOKEN=""
+
+########  Public functions #####################
+
+#Usage: dns_curanet_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_curanet_add() {
+  fulldomain=$1
+  txtvalue=$2
+  _info "Using curanet"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  CURANET_AUTHCLIENTID="${CURANET_AUTHCLIENTID:-$(_readaccountconf_mutable CURANET_AUTHCLIENTID)}"
+  CURANET_AUTHSECRET="${CURANET_AUTHSECRET:-$(_readaccountconf_mutable CURANET_AUTHSECRET)}"
+  if [ -z "$CURANET_AUTHCLIENTID" ] || [ -z "$CURANET_AUTHSECRET" ]; then
+    CURANET_AUTHCLIENTID=""
+    CURANET_AUTHSECRET=""
+    _err "You don't specify curanet api client and secret."
+    _err "Please create your auth info and try again."
+    return 1
+  fi
+
+  #save the credentials to the account conf file.
+  _saveaccountconf_mutable CURANET_AUTHCLIENTID "$CURANET_AUTHCLIENTID"
+  _saveaccountconf_mutable CURANET_AUTHSECRET "$CURANET_AUTHSECRET"
+
+  if ! _get_token; then
+    _err "Unable to get token"
+    return 1
+  fi
+
+  if ! _get_root "$fulldomain"; then
+    _err "Invalid domain"
+    return 1
+  fi
+
+  export _H1="Content-Type: application/json-patch+json"
+  export _H2="Accept: application/json"
+  export _H3="Authorization: Bearer $CURANET_ACCESS_TOKEN"
+  data="{\"name\": \"$fulldomain\",\"type\": \"TXT\",\"ttl\": 60,\"priority\": 0,\"data\": \"$txtvalue\"}"
+  response="$(_post "$data" "$CURANET_REST_URL/${_domain}/Records" "" "")"
+
+  if _contains "$response" "$txtvalue"; then
+    _debug "TXT record added OK"
+  else
+    _err "Unable to add TXT record"
+    return 1
+  fi
+
+  return 0
+}
+
+#Usage: fulldomain txtvalue
+#Remove the txt record after validation.
+dns_curanet_rm() {
+  fulldomain=$1
+  txtvalue=$2
+  _info "Using curanet"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  CURANET_AUTHCLIENTID="${CURANET_AUTHCLIENTID:-$(_readaccountconf_mutable CURANET_AUTHCLIENTID)}"
+  CURANET_AUTHSECRET="${CURANET_AUTHSECRET:-$(_readaccountconf_mutable CURANET_AUTHSECRET)}"
+
+  if ! _get_token; then
+    _err "Unable to get token"
+    return 1
+  fi
+
+  if ! _get_root "$fulldomain"; then
+    _err "Invalid domain"
+    return 1
+  fi
+
+  _debug "Getting current record list to identify TXT to delete"
+
+  export _H1="Content-Type: application/json"
+  export _H2="Accept: application/json"
+  export _H3="Authorization: Bearer $CURANET_ACCESS_TOKEN"
+
+  response="$(_get "$CURANET_REST_URL/${_domain}/Records" "" "")"
+
+  if ! _contains "$response" "$txtvalue"; then
+    _err "Unable to delete record (does not contain $txtvalue )"
+    return 1
+  fi
+
+  recordid=$(echo "$response" | _egrep_o "{\"id\":[0-9]+,\"name\":\"$fulldomain\",\"type\":\"TXT\",\"ttl\":60,\"priority\":0,\"data\":\"..$txtvalue" | _egrep_o "id\":[0-9]+" | cut -c 5-)
+
+  if [ -z "$recordid" ]; then
+    _err "Unable to get recordid"
+    _debug "regex {\"id\":[0-9]+,\"name\":\"$fulldomain\",\"type\":\"TXT\",\"ttl\":60,\"priority\":0,\"data\":\"..$txtvalue"
+    _debug "response $response"
+    return 1
+  fi
+
+  _debug "Deleting recordID $recordid"
+  response="$(_post "" "$CURANET_REST_URL/${_domain}/Records/$recordid" "" "DELETE")"
+  return 0
+}
+
+####################  Private functions below ##################################
+
+_get_token() {
+  response="$(_post "grant_type=client_credentials&client_id=$CURANET_AUTHCLIENTID&client_secret=$CURANET_AUTHSECRET&scope=dns" "$CURANET_AUTH_URL" "" "")"
+  if ! _contains "$response" "access_token"; then
+    _err "Unable get access token"
+    return 1
+  fi
+  CURANET_ACCESS_TOKEN=$(echo "$response" | _egrep_o "\"access_token\":\"[^\"]+" | cut -c 17-)
+
+  if [ -z "$CURANET_ACCESS_TOKEN" ]; then
+    _err "Unable to get token"
+    return 1
+  fi
+
+  return 0
+
+}
+
+#_acme-challenge.www.domain.com
+#returns
+# _domain=domain.com
+# _domain_id=sdjkglgdfewsdfg
+_get_root() {
+  domain=$1
+  i=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    export _H1="Content-Type: application/json"
+    export _H2="Accept: application/json"
+    export _H3="Authorization: Bearer $CURANET_ACCESS_TOKEN"
+    response="$(_get "$CURANET_REST_URL/$h/Records" "" "")"
+
+    if [ ! "$(echo "$response" | _egrep_o "Entity not found")" ]; then
+      _domain=$h
+      return 0
+    fi
+
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}

dnsapi/dns_cx.sh

@@ -1,185 +0,0 @@
-#!/usr/bin/env sh
-
-# CloudXNS Domain api
-#
-#CX_Key="1234"
-#
-#CX_Secret="sADDsdasdgdsf"
-
-CX_Api="https://www.cloudxns.net/api2"
-
-#REST_API
-########  Public functions #####################
-
-#Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
-dns_cx_add() {
-  fulldomain=$1
-  txtvalue=$2
-
-  CX_Key="${CX_Key:-$(_readaccountconf_mutable CX_Key)}"
-  CX_Secret="${CX_Secret:-$(_readaccountconf_mutable CX_Secret)}"
-  if [ -z "$CX_Key" ] || [ -z "$CX_Secret" ]; then
-    CX_Key=""
-    CX_Secret=""
-    _err "You don't specify cloudxns.net  api key or secret yet."
-    _err "Please create you key and try again."
-    return 1
-  fi
-
-  REST_API="$CX_Api"
-
-  #save the api key and email to the account conf file.
-  _saveaccountconf_mutable CX_Key "$CX_Key"
-  _saveaccountconf_mutable CX_Secret "$CX_Secret"
-
-  _debug "First detect the root zone"
-  if ! _get_root "$fulldomain"; then
-    _err "invalid domain"
-    return 1
-  fi
-
-  add_record "$_domain" "$_sub_domain" "$txtvalue"
-}
-
-#fulldomain txtvalue
-dns_cx_rm() {
-  fulldomain=$1
-  txtvalue=$2
-  CX_Key="${CX_Key:-$(_readaccountconf_mutable CX_Key)}"
-  CX_Secret="${CX_Secret:-$(_readaccountconf_mutable CX_Secret)}"
-  REST_API="$CX_Api"
-  if _get_root "$fulldomain"; then
-    record_id=""
-    existing_records "$_domain" "$_sub_domain" "$txtvalue"
-    if [ "$record_id" ]; then
-      _rest DELETE "record/$record_id/$_domain_id" "{}"
-      _info "Deleted record ${fulldomain}"
-    fi
-  fi
-}
-
-#usage:  root  sub
-#return if the sub record already exists.
-#echos the existing records count.
-# '0' means doesn't exist
-existing_records() {
-  _debug "Getting txt records"
-  root=$1
-  sub=$2
-  if ! _rest GET "record/$_domain_id?:domain_id?host_id=0&offset=0&row_num=100"; then
-    return 1
-  fi
-
-  seg=$(printf "%s\n" "$response" | _egrep_o '"record_id":[^{]*host":"'"$_sub_domain"'"[^}]*\}')
-  _debug seg "$seg"
-  if [ -z "$seg" ]; then
-    return 0
-  fi
-
-  if printf "%s" "$response" | grep '"type":"TXT"' >/dev/null; then
-    record_id=$(printf "%s\n" "$seg" | _egrep_o '"record_id":"[^"]*"' | cut -d : -f 2 | tr -d \" | _head_n 1)
-    _debug record_id "$record_id"
-    return 0
-  fi
-
-}
-
-#add the txt record.
-#usage: root  sub  txtvalue
-add_record() {
-  root=$1
-  sub=$2
-  txtvalue=$3
-  fulldomain="$sub.$root"
-
-  _info "Adding record"
-
-  if ! _rest POST "record" "{\"domain_id\": $_domain_id, \"host\":\"$_sub_domain\", \"value\":\"$txtvalue\", \"type\":\"TXT\",\"ttl\":600, \"line_id\":1}"; then
-    return 1
-  fi
-
-  return 0
-}
-
-####################  Private functions below ##################################
-#_acme-challenge.www.domain.com
-#returns
-# _sub_domain=_acme-challenge.www
-# _domain=domain.com
-# _domain_id=sdjkglgdfewsdfg
-_get_root() {
-  domain=$1
-  i=2
-  p=1
-
-  if ! _rest GET "domain"; then
-    return 1
-  fi
-
-  while true; do
-    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
-    _debug h "$h"
-    if [ -z "$h" ]; then
-      #not valid
-      return 1
-    fi
-
-    if _contains "$response" "$h."; then
-      seg=$(printf "%s\n" "$response" | _egrep_o '"id":[^{]*"'"$h"'."[^}]*}')
-      _debug seg "$seg"
-      _domain_id=$(printf "%s\n" "$seg" | _egrep_o "\"id\":\"[^\"]*\"" | cut -d : -f 2 | tr -d \")
-      _debug _domain_id "$_domain_id"
-      if [ "$_domain_id" ]; then
-        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
-        _debug _sub_domain "$_sub_domain"
-        _domain="$h"
-        _debug _domain "$_domain"
-        return 0
-      fi
-      return 1
-    fi
-    p="$i"
-    i=$(_math "$i" + 1)
-  done
-  return 1
-}
-
-#Usage: method  URI  data
-_rest() {
-  m=$1
-  ep="$2"
-  _debug ep "$ep"
-  url="$REST_API/$ep"
-  _debug url "$url"
-
-  cdate=$(date -u "+%Y-%m-%d %H:%M:%S UTC")
-  _debug cdate "$cdate"
-
-  data="$3"
-  _debug data "$data"
-
-  sec="$CX_Key$url$data$cdate$CX_Secret"
-  _debug sec "$sec"
-  hmac=$(printf "%s" "$sec" | _digest md5 hex)
-  _debug hmac "$hmac"
-
-  export _H1="API-KEY: $CX_Key"
-  export _H2="API-REQUEST-DATE: $cdate"
-  export _H3="API-HMAC: $hmac"
-  export _H4="Content-Type: application/json"
-
-  if [ "$data" ]; then
-    response="$(_post "$data" "$url" "" "$m")"
-  else
-    response="$(_get "$url")"
-  fi
-
-  if [ "$?" != "0" ]; then
-    _err "error $ep"
-    return 1
-  fi
-  _debug2 response "$response"
-
-  _contains "$response" '"code":1'
-
-}

dnsapi/dns_cyon.sh

@@ -44,7 +44,7 @@ dns_cyon_rm() {
 _cyon_load_credentials() {
   # Convert loaded password to/from base64 as needed.
   if [ "${CY_Password_B64}" ]; then
-    CY_Password="$(printf "%s" "${CY_Password_B64}" | _dbase64 "multiline")"
+    CY_Password="$(printf "%s" "${CY_Password_B64}" | _dbase64)"
   elif [ "${CY_Password}" ]; then
     CY_Password_B64="$(printf "%s" "${CY_Password}" | _base64)"
   fi

dnsapi/dns_ddnss.sh

@@ -12,7 +12,7 @@
 # --
 #
 
-DDNSS_DNS_API="https://ip4.ddnss.de/upd.php"
+DDNSS_DNS_API="https://ddnss.de/upd.php"
 
 ########  Public functions #####################
 
@@ -77,7 +77,7 @@ dns_ddnss_rm() {
 
   # Now remove the TXT record from DDNS DNS
   _info "Trying to remove TXT record"
-  if _ddnss_rest GET "key=$DDNSS_Token&host=$_ddnss_domain&txtm=1&txt=."; then
+  if _ddnss_rest GET "key=$DDNSS_Token&host=$_ddnss_domain&txtm=2"; then
     if [ "$response" = "Updated 1 hostname." ]; then
       _info "TXT record has been successfully removed from your DDNSS domain."
       return 0

dnsapi/dns_desec.sh

@@ -20,21 +20,17 @@ dns_desec_add() {
   _debug txtvalue "$txtvalue"
 
   DEDYN_TOKEN="${DEDYN_TOKEN:-$(_readaccountconf_mutable DEDYN_TOKEN)}"
-  DEDYN_NAME="${DEDYN_NAME:-$(_readaccountconf_mutable DEDYN_NAME)}"
 
-  if [ -z "$DEDYN_TOKEN" ] || [ -z "$DEDYN_NAME" ]; then
+  if [ -z "$DEDYN_TOKEN" ]; then
     DEDYN_TOKEN=""
-    DEDYN_NAME=""
-    _err "You did not specify DEDYN_TOKEN and DEDYN_NAME yet."
+    _err "You did not specify DEDYN_TOKEN yet."
     _err "Please create your key and try again."
     _err "e.g."
     _err "export DEDYN_TOKEN=d41d8cd98f00b204e9800998ecf8427e"
-    _err "export DEDYN_NAME=foobar.dedyn.io"
     return 1
   fi
-  #save the api token and name to the account conf file.
+  #save the api token to the account conf file.
   _saveaccountconf_mutable DEDYN_TOKEN "$DEDYN_TOKEN"
-  _saveaccountconf_mutable DEDYN_NAME "$DEDYN_NAME"
 
   _debug "First detect the root zone"
   if ! _get_root "$fulldomain" "$REST_API/"; then
@@ -47,7 +43,7 @@ dns_desec_add() {
   # Get existing TXT record
   _debug "Getting txt records"
   txtvalues="\"\\\"$txtvalue\\\"\""
-  _desec_rest GET "$REST_API/$DEDYN_NAME/rrsets/$_sub_domain/TXT/"
+  _desec_rest GET "$REST_API/$_domain/rrsets/$_sub_domain/TXT/"
 
   if [ "$_code" = "200" ]; then
     oldtxtvalues="$(echo "$response" | _egrep_o "\"records\":\\[\"\\S*\"\\]" | cut -d : -f 2 | tr -d "[]\\\\\"" | sed "s/,/ /g")"
@@ -61,9 +57,9 @@ dns_desec_add() {
   fi
   _debug txtvalues "$txtvalues"
   _info "Adding record"
-  body="[{\"subname\":\"$_sub_domain\", \"type\":\"TXT\", \"records\":[$txtvalues], \"ttl\":60}]"
+  body="[{\"subname\":\"$_sub_domain\", \"type\":\"TXT\", \"records\":[$txtvalues], \"ttl\":3600}]"
 
-  if _desec_rest PUT "$REST_API/$DEDYN_NAME/rrsets/" "$body"; then
+  if _desec_rest PUT "$REST_API/$_domain/rrsets/" "$body"; then
     if _contains "$response" "$txtvalue"; then
       _info "Added, OK"
       return 0
@@ -87,16 +83,13 @@ dns_desec_rm() {
   _debug txtvalue "$txtvalue"
 
   DEDYN_TOKEN="${DEDYN_TOKEN:-$(_readaccountconf_mutable DEDYN_TOKEN)}"
-  DEDYN_NAME="${DEDYN_NAME:-$(_readaccountconf_mutable DEDYN_NAME)}"
 
-  if [ -z "$DEDYN_TOKEN" ] || [ -z "$DEDYN_NAME" ]; then
+  if [ -z "$DEDYN_TOKEN" ]; then
     DEDYN_TOKEN=""
-    DEDYN_NAME=""
-    _err "You did not specify DEDYN_TOKEN and DEDYN_NAME yet."
+    _err "You did not specify DEDYN_TOKEN yet."
     _err "Please create your key and try again."
     _err "e.g."
     _err "export DEDYN_TOKEN=d41d8cd98f00b204e9800998ecf8427e"
-    _err "export DEDYN_NAME=foobar.dedyn.io"
     return 1
   fi
 
@@ -112,7 +105,7 @@ dns_desec_rm() {
   # Get existing TXT record
   _debug "Getting txt records"
   txtvalues=""
-  _desec_rest GET "$REST_API/$DEDYN_NAME/rrsets/$_sub_domain/TXT/"
+  _desec_rest GET "$REST_API/$_domain/rrsets/$_sub_domain/TXT/"
 
   if [ "$_code" = "200" ]; then
     oldtxtvalues="$(echo "$response" | _egrep_o "\"records\":\\[\"\\S*\"\\]" | cut -d : -f 2 | tr -d "[]\\\\\"" | sed "s/,/ /g")"
@@ -130,8 +123,8 @@ dns_desec_rm() {
   _debug txtvalues "$txtvalues"
 
   _info "Deleting record"
-  body="[{\"subname\":\"$_sub_domain\", \"type\":\"TXT\", \"records\":[$txtvalues], \"ttl\":60}]"
-  _desec_rest PUT "$REST_API/$DEDYN_NAME/rrsets/" "$body"
+  body="[{\"subname\":\"$_sub_domain\", \"type\":\"TXT\", \"records\":[$txtvalues], \"ttl\":3600}]"
+  _desec_rest PUT "$REST_API/$_domain/rrsets/" "$body"
   if [ "$_code" = "200" ]; then
     _info "Deleted, OK"
     return 0

dnsapi/dns_dgon.sh

@@ -192,6 +192,7 @@ _get_base_domain() {
   ## get URL for the list of domains
   ## may get: "links":{"pages":{"last":".../v2/domains/DOM/records?page=2","next":".../v2/domains/DOM/records?page=2"}}
   DOMURL="https://api.digitalocean.com/v2/domains"
+  found=""
 
   ## while we dont have a matching domain we keep going
   while [ -z "$found" ]; do
@@ -205,9 +206,7 @@ _get_base_domain() {
     fi
     _debug2 domain_list "$domain_list"
 
-    ## for each shortening of our $fulldomain, check if it exists in the $domain_list
-    ## can never start on 1 (aka whole $fulldomain) as $fulldomain starts with "_acme-challenge"
-    i=2
+    i=1
     while [ $i -gt 0 ]; do
       ## get next longest domain
       _domain=$(printf "%s" "$fulldomain" | cut -d . -f "$i"-"$MAX_DOM")

dnsapi/dns_dnshome.sh

@@ -0,0 +1,87 @@
+#!/usr/bin/env sh
+
+# dnsHome.de API for acme.sh
+#
+# This Script adds the necessary TXT record to a Subdomain
+#
+# Author dnsHome.de (https://github.com/dnsHome-de)
+#
+# Report Bugs to https://github.com/acmesh-official/acme.sh/issues/3819
+#
+# export DNSHOME_Subdomain=""
+# export DNSHOME_SubdomainPassword=""
+
+# Usage: add subdomain.ddnsdomain.tld "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to add txt record
+dns_dnshome_add() {
+  txtvalue=$2
+
+  DNSHOME_Subdomain="${DNSHOME_Subdomain:-$(_readdomainconf DNSHOME_Subdomain)}"
+  DNSHOME_SubdomainPassword="${DNSHOME_SubdomainPassword:-$(_readdomainconf DNSHOME_SubdomainPassword)}"
+
+  if [ -z "$DNSHOME_Subdomain" ] || [ -z "$DNSHOME_SubdomainPassword" ]; then
+    DNSHOME_Subdomain=""
+    DNSHOME_SubdomainPassword=""
+    _err "Please specify/export your dnsHome.de Subdomain and Password"
+    return 1
+  fi
+
+  #save the credentials to the account conf file.
+  _savedomainconf DNSHOME_Subdomain "$DNSHOME_Subdomain"
+  _savedomainconf DNSHOME_SubdomainPassword "$DNSHOME_SubdomainPassword"
+
+  DNSHOME_Api="https://$DNSHOME_Subdomain:[email protected]/dyndns.php"
+
+  _DNSHOME_rest POST "acme=add&txt=$txtvalue"
+  if ! echo "$response" | grep 'successfully' >/dev/null; then
+    _err "Error"
+    _err "$response"
+    return 1
+  fi
+
+  return 0
+}
+
+# Usage: txtvalue
+# Used to remove the txt record after validation
+dns_dnshome_rm() {
+  txtvalue=$2
+
+  DNSHOME_Subdomain="${DNSHOME_Subdomain:-$(_readdomainconf DNSHOME_Subdomain)}"
+  DNSHOME_SubdomainPassword="${DNSHOME_SubdomainPassword:-$(_readdomainconf DNSHOME_SubdomainPassword)}"
+
+  DNSHOME_Api="https://$DNSHOME_Subdomain:[email protected]/dyndns.php"
+
+  if [ -z "$DNSHOME_Subdomain" ] || [ -z "$DNSHOME_SubdomainPassword" ]; then
+    DNSHOME_Subdomain=""
+    DNSHOME_SubdomainPassword=""
+    _err "Please specify/export your dnsHome.de Subdomain and Password"
+    return 1
+  fi
+
+  _DNSHOME_rest POST "acme=rm&txt=$txtvalue"
+  if ! echo "$response" | grep 'successfully' >/dev/null; then
+    _err "Error"
+    _err "$response"
+    return 1
+  fi
+
+  return 0
+}
+
+####################  Private functions below ##################################
+_DNSHOME_rest() {
+  method=$1
+  data="$2"
+  _debug "$data"
+
+  _debug data "$data"
+  response="$(_post "$data" "$DNSHOME_Api" "" "$method")"
+
+  if [ "$?" != "0" ]; then
+    _err "error $data"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_dnsservices.sh

@@ -0,0 +1,248 @@
+#!/usr/bin/env sh
+
+#This file name is "dns_dnsservices.sh"
+#Script for Danish DNS registra and DNS hosting provider https://dns.services
+
+#Author: Bjarke Bruun <[email protected]>
+#Report Bugs here: https://github.com/acmesh-official/acme.sh/issues/4152
+
+# Global variable to connect to the DNS.Services API
+DNSServices_API=https://dns.services/api
+
+########  Public functions #####################
+
+#Usage: dns_dnsservices_add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_dnsservices_add() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _info "Using dns.services to create ACME DNS challenge"
+  _debug2 add_fulldomain "$fulldomain"
+  _debug2 add_txtvalue "$txtvalue"
+
+  # Read username/password from environment or .acme.sh/accounts.conf
+  DnsServices_Username="${DnsServices_Username:-$(_readaccountconf_mutable DnsServices_Username)}"
+  DnsServices_Password="${DnsServices_Password:-$(_readaccountconf_mutable DnsServices_Password)}"
+  if [ -z "$DnsServices_Username" ] || [ -z "$DnsServices_Password" ]; then
+    DnsServices_Username=""
+    DnsServices_Password=""
+    _err "You didn't specify dns.services api username and password yet."
+    _err "Set environment variables DnsServices_Username and DnsServices_Password"
+    return 1
+  fi
+
+  # Setup GET/POST/DELETE headers
+  _setup_headers
+
+  #save the credentials to the account conf file.
+  _saveaccountconf_mutable DnsServices_Username "$DnsServices_Username"
+  _saveaccountconf_mutable DnsServices_Password "$DnsServices_Password"
+
+  if ! _contains "$DnsServices_Username" "@"; then
+    _err "It seems that the username variable DnsServices_Username has not been set/left blank"
+    _err "or is not a valid email. Please correct and try again."
+    return 1
+  fi
+
+  if ! _get_root "${fulldomain}"; then
+    _err "Invalid domain ${fulldomain}"
+    return 1
+  fi
+
+  if ! createRecord "$fulldomain" "${txtvalue}"; then
+    _err "Error creating TXT record in domain $fulldomain in $rootZoneName"
+    return 1
+  fi
+
+  _debug2 challenge-created "Created $fulldomain"
+  return 0
+}
+
+#Usage: fulldomain txtvalue
+#Description: Remove the txt record after validation.
+dns_dnsservices_rm() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _info "Using dns.services to remove DNS record $fulldomain TXT $txtvalue"
+  _debug rm_fulldomain "$fulldomain"
+  _debug rm_txtvalue "$txtvalue"
+
+  # Read username/password from environment or .acme.sh/accounts.conf
+  DnsServices_Username="${DnsServices_Username:-$(_readaccountconf_mutable DnsServices_Username)}"
+  DnsServices_Password="${DnsServices_Password:-$(_readaccountconf_mutable DnsServices_Password)}"
+  if [ -z "$DnsServices_Username" ] || [ -z "$DnsServices_Password" ]; then
+    DnsServices_Username=""
+    DnsServices_Password=""
+    _err "You didn't specify dns.services api username and password yet."
+    _err "Set environment variables DnsServices_Username and DnsServices_Password"
+    return 1
+  fi
+
+  # Setup GET/POST/DELETE headers
+  _setup_headers
+
+  if ! _get_root "${fulldomain}"; then
+    _err "Invalid domain ${fulldomain}"
+    return 1
+  fi
+
+  _debug2 rm_rootDomainInfo "found root domain $rootZoneName for $fulldomain"
+
+  if ! deleteRecord "${fulldomain}" "${txtvalue}"; then
+    _err "Error removing record: $fulldomain TXT ${txtvalue}"
+    return 1
+  fi
+
+  return 0
+}
+
+####################  Private functions below ##################################
+
+_setup_headers() {
+  # Set up API Headers for _get() and _post()
+  # The <function>_add or <function>_rm must have been called before to work
+
+  if [ -z "$DnsServices_Username" ] || [ -z "$DnsServices_Password" ]; then
+    _err "Could not setup BASIC authentication headers, they are missing"
+    return 1
+  fi
+
+  DnsServiceCredentials="$(printf "%s" "$DnsServices_Username:$DnsServices_Password" | _base64)"
+  export _H1="Authorization: Basic $DnsServiceCredentials"
+  export _H2="Content-Type: application/json"
+
+  # Just return if headers are set
+  return 0
+}
+
+_get_root() {
+  domain="$1"
+  _debug2 _get_root "Get the root domain of ${domain} for DNS API"
+
+  # Setup _get() and _post() headers
+  #_setup_headers
+
+  result=$(_H1="$_H1" _H2="$_H2" _get "$DNSServices_API/dns")
+  result2="$(printf "%s\n" "$result" | tr '[' '\n' | grep '"name"')"
+  result3="$(printf "%s\n" "$result2" | tr '}' '\n' | grep '"name"' | sed "s,^\,,,g" | sed "s,$,},g")"
+  useResult=""
+  _debug2 _get_root "Got the following root domain(s) $result"
+  _debug2 _get_root "- JSON: $result"
+
+  if [ "$(printf "%s\n" "$result" | tr '}' '\n' | grep -c '"name"')" -gt "1" ]; then
+    checkMultiZones="true"
+    _debug2 _get_root "- multiple zones found"
+  else
+    checkMultiZones="false"
+    _debug2 _get_root "- single zone found"
+  fi
+
+  # Find/isolate the root zone to work with in createRecord() and deleteRecord()
+  rootZone=""
+  if [ "$checkMultiZones" = "true" ]; then
+    #rootZone=$(for x in $(printf "%s" "${result3}" | tr ',' '\n' | sed -n 's/.*"name":"\(.*\)",.*/\1/p'); do if [ "$(echo "$domain" | grep "$x")" != "" ]; then echo "$x"; fi; done)
+    rootZone=$(for x in $(printf "%s\n" "${result3}" | tr ',' '\n' | grep name | cut -d'"' -f4); do if [ "$(echo "$domain" | grep "$x")" != "" ]; then echo "$x"; fi; done)
+    if [ "$rootZone" != "" ]; then
+      _debug2 _rootZone "- root zone for $domain is $rootZone"
+    else
+      _err "Could not find root zone for $domain, is it correctly typed?"
+      return 1
+    fi
+  else
+    rootZone=$(echo "$result" | tr '}' '\n' | _egrep_o '"name":"[^"]*' | cut -d'"' -f4)
+    _debug2 _get_root "- only found 1 domain in API: $rootZone"
+  fi
+
+  if [ -z "$rootZone" ]; then
+    _err "Could not find root domain for $domain - is it correctly typed?"
+    return 1
+  fi
+
+  # Make sure we use the correct API zone data
+  useResult="$(printf "%s\n" "${result3}" tr ',' '\n' | grep "$rootZone")"
+  _debug2 _useResult "useResult=$useResult"
+
+  # Setup variables used by other functions to communicate with DNS.Services API
+  #zoneInfo=$(printf "%s\n" "$useResult" | sed -E 's,.*(zones)(.*),\1\2,g' | sed -E 's,^(.*"name":")([^"]*)"(.*)$,\2,g')
+  zoneInfo=$(printf "%s\n" "$useResult" | tr ',' '\n' | grep '"name"' | cut -d'"' -f4)
+  rootZoneName="$rootZone"
+  subDomainName="$(printf "%s\n" "$domain" | sed "s,\.$rootZone,,g")"
+  subDomainNameClean="$(printf "%s\n" "$domain" | sed "s,_acme-challenge.,,g")"
+  rootZoneDomainID=$(printf "%s\n" "$useResult" | tr ',' '\n' | grep domain_id | cut -d'"' -f4)
+  rootZoneServiceID=$(printf "%s\n" "$useResult" | tr ',' '\n' | grep service_id | cut -d'"' -f4)
+
+  _debug2 _zoneInfo "Zone info from API  : $zoneInfo"
+  _debug2 _get_root "Root zone name      : $rootZoneName"
+  _debug2 _get_root "Root zone domain ID : $rootZoneDomainID"
+  _debug2 _get_root "Root zone service ID: $rootZoneServiceID"
+  _debug2 _get_root "Sub domain          : $subDomainName"
+
+  _debug _get_root "Found valid root domain $rootZone for $subDomainNameClean"
+  return 0
+}
+
+createRecord() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  # Get root domain information - needed for DNS.Services API communication
+  if [ -z "$rootZoneName" ] || [ -z "$rootZoneDomainID" ] || [ -z "$rootZoneServiceID" ]; then
+    _get_root "$fulldomain"
+  fi
+  if [ -z "$rootZoneName" ] || [ -z "$rootZoneDomainID" ] || [ -z "$rootZoneServiceID" ]; then
+    _err "Something happend - could not get the API zone information"
+    return 1
+  fi
+
+  _debug2 createRecord "CNAME TXT value is: $txtvalue"
+
+  # Prepare data to send to API
+  data="{\"name\":\"${fulldomain}\",\"type\":\"TXT\",\"content\":\"${txtvalue}\", \"ttl\":\"10\"}"
+
+  _debug2 createRecord "data to API: $data"
+  result=$(_post "$data" "$DNSServices_API/service/$rootZoneServiceID/dns/$rootZoneDomainID/records" "" "POST")
+  _debug2 createRecord "result from API: $result"
+
+  if [ "$(echo "$result" | _egrep_o "\"success\":true")" = "" ]; then
+    _err "Failed to create TXT record $fulldomain with content $txtvalue in zone $rootZoneName"
+    _err "$result"
+    return 1
+  fi
+
+  _info "Record \"$fulldomain TXT $txtvalue\" has been created"
+  return 0
+}
+
+deleteRecord() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _log deleteRecord "Deleting $fulldomain TXT $txtvalue record"
+
+  if [ -z "$rootZoneName" ] || [ -z "$rootZoneDomainID" ] || [ -z "$rootZoneServiceID" ]; then
+    _get_root "$fulldomain"
+  fi
+
+  result="$(_H1="$_H1" _H2="$_H2" _get "$DNSServices_API/service/$rootZoneServiceID/dns/$rootZoneDomainID")"
+  #recordInfo="$(echo "$result" | sed -e 's/:{/:{\n/g' -e 's/},/\n},\n/g' | grep "${txtvalue}")"
+  #recordID="$(echo "$recordInfo" | sed -e 's/:{/:{\n/g' -e 's/},/\n},\n/g' | grep "${txtvalue}" | sed -E 's,.*(zones)(.*),\1\2,g' | sed -E 's,^(.*"id":")([^"]*)"(.*)$,\2,g')"
+  recordID="$(printf "%s\n" "$result" | tr '}' '\n' | grep -- "$txtvalue" | tr ',' '\n' | grep '"id"' | cut -d'"' -f4)"
+  _debug2 _recordID "recordID used for deletion of record: $recordID"
+
+  if [ -z "$recordID" ]; then
+    _info "Record $fulldomain TXT $txtvalue not found or already deleted"
+    return 0
+  else
+    _debug2 deleteRecord "Found recordID=$recordID"
+  fi
+
+  _debug2 deleteRecord "DELETE request $DNSServices_API/service/$rootZoneServiceID/dns/$rootZoneDomainID/records/$recordID"
+  _log "curl DELETE request $DNSServices_API/service/$rootZoneServiceID/dns/$rootZoneDomainID/records/$recordID"
+  result="$(_H1="$_H1" _H2="$_H2" _post "" "$DNSServices_API/service/$rootZoneServiceID/dns/$rootZoneDomainID/records/$recordID" "" "DELETE")"
+  _debug2 deleteRecord "API Delete result \"$result\""
+  _log "curl API Delete result \"$result\""
+
+  # Return OK regardless
+  return 0
+}

dnsapi/dns_dp.sh

@@ -89,7 +89,7 @@ add_record() {
 
   _info "Adding record"
 
-  if ! _rest POST "Record.Create" "login_token=$DP_Id,$DP_Key&format=json&lang=en&domain_id=$_domain_id&sub_domain=$_sub_domain&record_type=TXT&value=$txtvalue&record_line=默认"; then
+  if ! _rest POST "Record.Create" "login_token=$DP_Id,$DP_Key&format=json&lang=en&domain_id=$_domain_id&sub_domain=$_sub_domain&record_type=TXT&value=$txtvalue&record_line=%E9%BB%98%E8%AE%A4"; then
     return 1
   fi
 

dnsapi/dns_dpi.sh

@@ -53,7 +53,7 @@ dns_dpi_rm() {
     return 1
   fi
 
-  if ! _rest POST "Record.List" "user_token=$DPI_Id,$DPI_Key&format=json&domain_id=$_domain_id&sub_domain=$_sub_domain"; then
+  if ! _rest POST "Record.List" "login_token=$DPI_Id,$DPI_Key&format=json&domain_id=$_domain_id&sub_domain=$_sub_domain"; then
     _err "Record.Lis error."
     return 1
   fi
@@ -63,19 +63,19 @@ dns_dpi_rm() {
     return 0
   fi
 
-  record_id=$(echo "$response" | _egrep_o '{[^{]*"value":"'"$txtvalue"'"' | cut -d , -f 1 | cut -d : -f 2 | tr -d \")
+  record_id=$(echo "$response" | tr "{" "\n" | grep -- "$txtvalue" | grep '^"id"' | cut -d : -f 2 | cut -d '"' -f 2)
   _debug record_id "$record_id"
   if [ -z "$record_id" ]; then
     _err "Can not get record id."
     return 1
   fi
 
-  if ! _rest POST "Record.Remove" "user_token=$DPI_Id,$DPI_Key&format=json&domain_id=$_domain_id&record_id=$record_id"; then
+  if ! _rest POST "Record.Remove" "login_token=$DPI_Id,$DPI_Key&format=json&domain_id=$_domain_id&record_id=$record_id"; then
     _err "Record.Remove error."
     return 1
   fi
 
-  _contains "$response" "Action completed successful"
+  _contains "$response" "Operation successful"
 
 }
 
@@ -89,11 +89,11 @@ add_record() {
 
   _info "Adding record"
 
-  if ! _rest POST "Record.Create" "user_token=$DPI_Id,$DPI_Key&format=json&domain_id=$_domain_id&sub_domain=$_sub_domain&record_type=TXT&value=$txtvalue&record_line=default"; then
+  if ! _rest POST "Record.Create" "login_token=$DPI_Id,$DPI_Key&format=json&domain_id=$_domain_id&sub_domain=$_sub_domain&record_type=TXT&value=$txtvalue&record_line=default"; then
     return 1
   fi
 
-  _contains "$response" "Action completed successful" || _contains "$response" "Domain record already exists"
+  _contains "$response" "Operation successful" || _contains "$response" "Domain record already exists"
 }
 
 ####################  Private functions below ##################################
@@ -113,11 +113,11 @@ _get_root() {
       return 1
     fi
 
-    if ! _rest POST "Domain.Info" "user_token=$DPI_Id,$DPI_Key&format=json&domain=$h"; then
+    if ! _rest POST "Domain.Info" "login_token=$DPI_Id,$DPI_Key&format=json&domain=$h"; then
       return 1
     fi
 
-    if _contains "$response" "Action completed successful"; then
+    if _contains "$response" "Operation successful"; then
       _domain_id=$(printf "%s\n" "$response" | _egrep_o "\"id\":\"[^\"]*\"" | cut -d : -f 2 | tr -d \")
       _debug _domain_id "$_domain_id"
       if [ "$_domain_id" ]; then

dnsapi/dns_duckdns.sh

@@ -12,7 +12,7 @@
 
 DuckDNS_API="https://www.duckdns.org/update"
 
-########  Public functions #####################
+########  Public functions ######################
 
 #Usage: dns_duckdns_add _acme-challenge.domain.duckdns.org "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
 dns_duckdns_add() {
@@ -96,7 +96,7 @@ dns_duckdns_rm() {
 _duckdns_get_domain() {
 
   # We'll extract the domain/username from full domain
-  _duckdns_domain="$(printf "%s" "$fulldomain" | _lower_case | _egrep_o '^(_acme-challenge\.)?[a-z0-9-]*\.duckdns\.org' | sed 's/^\(_acme-challenge\.\)\?\([a-z0-9-]*\)\.duckdns\.org/\2/')"
+  _duckdns_domain="$(printf "%s" "$fulldomain" | _lower_case | _egrep_o '^(_acme-challenge\.)?([a-z0-9-]+\.)+duckdns\.org' | sed -n 's/^\([^.]\{1,\}\.\)*\([a-z0-9-]\{1,\}\)\.duckdns\.org$/\2/p;')"
 
   if [ -z "$_duckdns_domain" ]; then
     _err "Error extracting the domain."
@@ -112,7 +112,7 @@ _duckdns_rest() {
   param="$2"
   _debug param "$param"
   url="$DuckDNS_API?$param"
-  if [ "$DEBUG" -gt 0 ]; then
+  if [ -n "$DEBUG" ] && [ "$DEBUG" -gt 0 ]; then
     url="$url&verbose=true"
   fi
   _debug url "$url"
@@ -121,7 +121,7 @@ _duckdns_rest() {
   if [ "$method" = "GET" ]; then
     response="$(_get "$url")"
     _debug2 response "$response"
-    if [ "$DEBUG" -gt 0 ] && _contains "$response" "UPDATED" && _contains "$response" "OK"; then
+    if [ -n "$DEBUG" ] && [ "$DEBUG" -gt 0 ] && _contains "$response" "UPDATED" && _contains "$response" "OK"; then
       response="OK"
     fi
   else

dnsapi/dns_dynv6.sh

@@ -94,8 +94,8 @@ _get_domain() {
   _your_hosts="$(echo "$_your_hosts" | awk '/\./ {print $1}')"
   for l in $_your_hosts; do
     #echo "host: $l"
-    if test "${_full_domain#*$l}" != "$_full_domain"; then
-      _record="${_full_domain%.$l}"
+    if test "${_full_domain#*"$l"}" != "$_full_domain"; then
+      _record=${_full_domain%."$l"}
       _host=$l
       _debug "The host is $_host and the record $_record"
       return 0
@@ -143,7 +143,7 @@ _dns_dynv6_add_http() {
     return 1
   fi
   _get_zone_name "$_zone_id"
-  record="${fulldomain%%.$_zone_name}"
+  record=${fulldomain%%."$_zone_name"}
   _set_record TXT "$record" "$txtvalue"
   if _contains "$response" "$txtvalue"; then
     _info "Successfully added record"
@@ -161,7 +161,7 @@ _dns_dynv6_rm_http() {
     return 1
   fi
   _get_zone_name "$_zone_id"
-  record="${fulldomain%%.$_zone_name}"
+  record=${fulldomain%%."$_zone_name"}
   _get_record_id "$_zone_id" "$record" "$txtvalue"
   _del_record "$_zone_id" "$_record_id"
   if [ -z "$response" ]; then

dnsapi/dns_edgedns.sh

@@ -0,0 +1,470 @@
+#!/usr/bin/env sh
+
+# Akamai Edge DNS v2  API
+# User must provide Open Edgegrid API credentials to the EdgeDNS installation. The remote user in EdgeDNS must have CRUD access to
+# Edge DNS Zones and Recordsets, e.g. DNS—Zone Record Management authorization
+
+# Report bugs to https://control.akamai.com/apps/support-ui/#/contact-support
+
+# Values to export:
+# --EITHER--
+# *** TBD. NOT IMPLEMENTED YET ***
+# specify Edgegrid credentials file and section
+# AKAMAI_EDGERC=<full file path>
+# AKAMAI_EDGERC_SECTION="default"
+## --OR--
+# specify indiviual credentials
+# export AKAMAI_HOST = <host>
+# export AKAMAI_ACCESS_TOKEN = <access token>
+# export AKAMAI_CLIENT_TOKEN = <client token>
+# export AKAMAI_CLIENT_SECRET = <client secret>
+
+ACME_EDGEDNS_VERSION="0.1.0"
+
+########  Public functions #####################
+
+# Usage: dns_edgedns_add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to add txt record
+#
+dns_edgedns_add() {
+  fulldomain=$1
+  txtvalue=$2
+  _debug "ENTERING DNS_EDGEDNS_ADD"
+  _debug2 "fulldomain" "$fulldomain"
+  _debug2 "txtvalue" "$txtvalue"
+
+  if ! _EDGEDNS_credentials; then
+    _err "$@"
+    return 1
+  fi
+  if ! _EDGEDNS_getZoneInfo "$fulldomain"; then
+    _err "Invalid domain"
+    return 1
+  fi
+
+  _debug2 "Add: zone" "$zone"
+  acmeRecordURI=$(printf "%s/%s/names/%s/types/TXT" "$edge_endpoint" "$zone" "$fulldomain")
+  _debug3 "Add URL" "$acmeRecordURI"
+  # Get existing TXT record
+  _edge_result=$(_edgedns_rest GET "$acmeRecordURI")
+  _api_status="$?"
+  _debug3 "_edge_result" "$_edge_result"
+  if [ "$_api_status" -ne 0 ]; then
+    if [ "$curResult" = "FATAL" ]; then
+      _err "$(printf "Fatal error: acme API function call : %s" "$retVal")"
+    fi
+    if [ "$_edge_result" != "404" ]; then
+      _err "$(printf "Failure accessing Akamai Edge DNS API Server. Error: %s" "$_edge_result")"
+      return 1
+    fi
+  fi
+  rdata="\"${txtvalue}\""
+  record_op="POST"
+  if [ "$_api_status" -eq 0 ]; then
+    # record already exists. Get existing record data and update
+    record_op="PUT"
+    rdlist="${_edge_result#*\"rdata\":[}"
+    rdlist="${rdlist%%]*}"
+    rdlist=$(echo "$rdlist" | tr -d '"' | tr -d "\\\\")
+    _debug3 "existing TXT found"
+    _debug3 "record data" "$rdlist"
+    # value already there?
+    if _contains "$rdlist" "$txtvalue"; then
+      return 0
+    fi
+    _txt_val=""
+    while [ "$_txt_val" != "$rdlist" ] && [ "${rdlist}" ]; do
+      _txt_val="${rdlist%%,*}"
+      rdlist="${rdlist#*,}"
+      rdata="${rdata},\"${_txt_val}\""
+    done
+  fi
+  # Add the txtvalue TXT Record
+  body="{\"name\":\"$fulldomain\",\"type\":\"TXT\",\"ttl\":600, \"rdata\":"[${rdata}]"}"
+  _debug3 "Add body '${body}'"
+  _edge_result=$(_edgedns_rest "$record_op" "$acmeRecordURI" "$body")
+  _api_status="$?"
+  if [ "$_api_status" -eq 0 ]; then
+    _log "$(printf "Text value %s added to recordset %s" "$txtvalue" "$fulldomain")"
+    return 0
+  else
+    _err "$(printf "error adding TXT record for validation. Error: %s" "$_edge_result")"
+    return 1
+  fi
+}
+
+# Usage: dns_edgedns_rm   _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to delete txt record
+#
+dns_edgedns_rm() {
+  fulldomain=$1
+  txtvalue=$2
+  _debug "ENTERING DNS_EDGEDNS_RM"
+  _debug2 "fulldomain" "$fulldomain"
+  _debug2 "txtvalue" "$txtvalue"
+
+  if ! _EDGEDNS_credentials; then
+    _err "$@"
+    return 1
+  fi
+  if ! _EDGEDNS_getZoneInfo "$fulldomain"; then
+    _err "Invalid domain"
+    return 1
+  fi
+  _debug2 "RM: zone" "${zone}"
+  acmeRecordURI=$(printf "%s/%s/names/%s/types/TXT" "${edge_endpoint}" "$zone" "$fulldomain")
+  _debug3 "RM URL" "$acmeRecordURI"
+  # Get existing TXT record
+  _edge_result=$(_edgedns_rest GET "$acmeRecordURI")
+  _api_status="$?"
+  if [ "$_api_status" -ne 0 ]; then
+    if [ "$curResult" = "FATAL" ]; then
+      _err "$(printf "Fatal error: acme API function call : %s" "$retVal")"
+    fi
+    if [ "$_edge_result" != "404" ]; then
+      _err "$(printf "Failure accessing Akamai Edge DNS API Server. Error: %s" "$_edge_result")"
+      return 1
+    fi
+  fi
+  _debug3 "_edge_result" "$_edge_result"
+  record_op="DELETE"
+  body=""
+  if [ "$_api_status" -eq 0 ]; then
+    # record already exists. Get existing record data and update
+    rdlist="${_edge_result#*\"rdata\":[}"
+    rdlist="${rdlist%%]*}"
+    rdlist=$(echo "$rdlist" | tr -d '"' | tr -d "\\\\")
+    _debug3 "rdlist" "$rdlist"
+    if [ -n "$rdlist" ]; then
+      record_op="PUT"
+      comma=""
+      rdata=""
+      _txt_val=""
+      while [ "$_txt_val" != "$rdlist" ] && [ "$rdlist" ]; do
+        _txt_val="${rdlist%%,*}"
+        rdlist="${rdlist#*,}"
+        _debug3 "_txt_val" "$_txt_val"
+        _debug3 "txtvalue" "$txtvalue"
+        if ! _contains "$_txt_val" "$txtvalue"; then
+          rdata="${rdata}${comma}\"${_txt_val}\""
+          comma=","
+        fi
+      done
+      if [ -z "$rdata" ]; then
+        record_op="DELETE"
+      else
+        # Recreate the txtvalue TXT Record
+        body="{\"name\":\"$fulldomain\",\"type\":\"TXT\",\"ttl\":600, \"rdata\":"[${rdata}]"}"
+        _debug3 "body" "$body"
+      fi
+    fi
+  fi
+  _edge_result=$(_edgedns_rest "$record_op" "$acmeRecordURI" "$body")
+  _api_status="$?"
+  if [ "$_api_status" -eq 0 ]; then
+    _log "$(printf "Text value %s removed from recordset %s" "$txtvalue" "$fulldomain")"
+    return 0
+  else
+    _err "$(printf "error removing TXT record for validation. Error: %s" "$_edge_result")"
+    return 1
+  fi
+}
+
+####################  Private functions below ##################################
+
+_EDGEDNS_credentials() {
+  _debug "GettingEdge DNS credentials"
+  _log "$(printf "ACME DNSAPI Edge DNS version %s" ${ACME_EDGEDNS_VERSION})"
+  args_missing=0
+  AKAMAI_ACCESS_TOKEN="${AKAMAI_ACCESS_TOKEN:-$(_readaccountconf_mutable AKAMAI_ACCESS_TOKEN)}"
+  if [ -z "$AKAMAI_ACCESS_TOKEN" ]; then
+    AKAMAI_ACCESS_TOKEN=""
+    AKAMAI_CLIENT_TOKEN=""
+    AKAMAI_HOST=""
+    AKAMAI_CLIENT_SECRET=""
+    _err "AKAMAI_ACCESS_TOKEN is missing"
+    args_missing=1
+  fi
+  AKAMAI_CLIENT_TOKEN="${AKAMAI_CLIENT_TOKEN:-$(_readaccountconf_mutable AKAMAI_CLIENT_TOKEN)}"
+  if [ -z "$AKAMAI_CLIENT_TOKEN" ]; then
+    AKAMAI_ACCESS_TOKEN=""
+    AKAMAI_CLIENT_TOKEN=""
+    AKAMAI_HOST=""
+    AKAMAI_CLIENT_SECRET=""
+    _err "AKAMAI_CLIENT_TOKEN is missing"
+    args_missing=1
+  fi
+  AKAMAI_HOST="${AKAMAI_HOST:-$(_readaccountconf_mutable AKAMAI_HOST)}"
+  if [ -z "$AKAMAI_HOST" ]; then
+    AKAMAI_ACCESS_TOKEN=""
+    AKAMAI_CLIENT_TOKEN=""
+    AKAMAI_HOST=""
+    AKAMAI_CLIENT_SECRET=""
+    _err "AKAMAI_HOST is missing"
+    args_missing=1
+  fi
+  AKAMAI_CLIENT_SECRET="${AKAMAI_CLIENT_SECRET:-$(_readaccountconf_mutable AKAMAI_CLIENT_SECRET)}"
+  if [ -z "$AKAMAI_CLIENT_SECRET" ]; then
+    AKAMAI_ACCESS_TOKEN=""
+    AKAMAI_CLIENT_TOKEN=""
+    AKAMAI_HOST=""
+    AKAMAI_CLIENT_SECRET=""
+    _err "AKAMAI_CLIENT_SECRET is missing"
+    args_missing=1
+  fi
+
+  if [ "$args_missing" = 1 ]; then
+    _err "You have not properly specified the EdgeDNS Open Edgegrid API credentials. Please try again."
+    return 1
+  else
+    _saveaccountconf_mutable AKAMAI_ACCESS_TOKEN "$AKAMAI_ACCESS_TOKEN"
+    _saveaccountconf_mutable AKAMAI_CLIENT_TOKEN "$AKAMAI_CLIENT_TOKEN"
+    _saveaccountconf_mutable AKAMAI_HOST "$AKAMAI_HOST"
+    _saveaccountconf_mutable AKAMAI_CLIENT_SECRET "$AKAMAI_CLIENT_SECRET"
+    # Set whether curl should use secure or insecure mode
+  fi
+  export HTTPS_INSECURE=0 # All Edgegrid API calls are secure
+  edge_endpoint=$(printf "https://%s/config-dns/v2/zones" "$AKAMAI_HOST")
+  _debug3 "Edge API Endpoint:" "$edge_endpoint"
+
+}
+
+_EDGEDNS_getZoneInfo() {
+  _debug "Getting Zoneinfo"
+  zoneEnd=false
+  curZone=$1
+  while [ -n "$zoneEnd" ]; do
+    # we can strip the first part of the fulldomain, since its just the _acme-challenge string
+    curZone="${curZone#*.}"
+    # suffix . needed for zone -> domain.tld.
+    # create zone get url
+    get_zone_url=$(printf "%s/%s" "$edge_endpoint" "$curZone")
+    _debug3 "Zone Get: " "${get_zone_url}"
+    curResult=$(_edgedns_rest GET "$get_zone_url")
+    retVal=$?
+    if [ "$retVal" -ne 0 ]; then
+      if [ "$curResult" = "FATAL" ]; then
+        _err "$(printf "Fatal error: acme API function call : %s" "$retVal")"
+      fi
+      if [ "$curResult" != "404" ]; then
+        _err "$(printf "Managed zone validation failed. Error response: %s" "$retVal")"
+        return 1
+      fi
+    fi
+    if _contains "$curResult" "\"zone\":"; then
+      _debug2 "Zone data" "${curResult}"
+      zone=$(echo "${curResult}" | _egrep_o "\"zone\"\\s*:\\s*\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d "\"")
+      _debug3 "Zone" "${zone}"
+      zoneEnd=""
+      return 0
+    fi
+
+    if [ "${curZone#*.}" != "$curZone" ]; then
+      _debug3 "$(printf "%s still contains a '.' - so we can check next higher level" "$curZone")"
+    else
+      zoneEnd=true
+      _err "Couldn't retrieve zone data."
+      return 1
+    fi
+  done
+  _err "Failed to  retrieve zone data."
+  return 2
+}
+
+_edgedns_headers=""
+
+_edgedns_rest() {
+  _debug "Handling API Request"
+  m=$1
+  # Assume endpoint is complete path, including query args if applicable
+  ep=$2
+  body_data=$3
+  _edgedns_content_type=""
+  _request_url_path="$ep"
+  _request_body="$body_data"
+  _request_method="$m"
+  _edgedns_headers=""
+  tab=""
+  _edgedns_headers="${_edgedns_headers}${tab}Host: ${AKAMAI_HOST}"
+  tab="\t"
+  # Set in acme.sh _post/_get
+  #_edgedns_headers="${_edgedns_headers}${tab}User-Agent:ACME DNSAPI Edge DNS version ${ACME_EDGEDNS_VERSION}"
+  _edgedns_headers="${_edgedns_headers}${tab}Accept: application/json,*/*"
+  if [ "$m" != "GET" ] && [ "$m" != "DELETE" ]; then
+    _edgedns_content_type="application/json"
+    _debug3 "_request_body" "$_request_body"
+    _body_len=$(echo "$_request_body" | tr -d "\n\r" | awk '{print length}')
+    _edgedns_headers="${_edgedns_headers}${tab}Content-Length: ${_body_len}"
+  fi
+  _edgedns_make_auth_header
+  _edgedns_headers="${_edgedns_headers}${tab}Authorization: ${_signed_auth_header}"
+  _secure_debug2 "Made Auth Header" "$_signed_auth_header"
+  hdr_indx=1
+  work_header="${_edgedns_headers}${tab}"
+  _debug3 "work_header" "$work_header"
+  while [ "$work_header" ]; do
+    entry="${work_header%%\\t*}"
+    work_header="${work_header#*\\t}"
+    export "$(printf "_H%s=%s" "$hdr_indx" "$entry")"
+    _debug2 "Request Header " "$entry"
+    hdr_indx=$((hdr_indx + 1))
+  done
+
+  # clear headers from previous request to avoid getting wrong http code on timeouts
+  : >"$HTTP_HEADER"
+  _debug2 "$ep"
+  if [ "$m" != "GET" ]; then
+    _debug3 "Method data" "$data"
+    # body  url [needbase64] [POST|PUT|DELETE] [ContentType]
+    response=$(_post "$_request_body" "$ep" false "$m" "$_edgedns_content_type")
+  else
+    response=$(_get "$ep")
+  fi
+  _ret="$?"
+  if [ "$_ret" -ne 0 ]; then
+    _err "$(printf "acme.sh API function call failed. Error: %s" "$_ret")"
+    echo "FATAL"
+    return "$_ret"
+  fi
+  _debug2 "response" "${response}"
+  _code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\\r\\n")"
+  _debug2 "http response code" "$_code"
+  if [ "$_code" = "200" ] || [ "$_code" = "201" ]; then
+    # All good
+    response="$(echo "${response}" | _normalizeJson)"
+    echo "$response"
+    return 0
+  fi
+
+  if [ "$_code" = "204" ]; then
+    # Success, no body
+    echo "$_code"
+    return 0
+  fi
+
+  if [ "$_code" = "400" ]; then
+    _err "Bad request presented"
+    _log "$(printf "Headers: %s" "$_edgedns_headers")"
+    _log "$(printf "Method: %s" "$_request_method")"
+    _log "$(printf "URL: %s" "$ep")"
+    _log "$(printf "Data: %s" "$data")"
+  fi
+
+  if [ "$_code" = "403" ]; then
+    _err "access denied make sure your Edgegrid cedentials are correct."
+  fi
+
+  echo "$_code"
+  return 1
+}
+
+_edgedns_eg_timestamp() {
+  _debug "Generating signature Timestamp"
+  _debug3 "Retriving ntp time"
+  _timeheaders="$(_get "https://www.ntp.org" "onlyheader")"
+  _debug3 "_timeheaders" "$_timeheaders"
+  _ntpdate="$(echo "$_timeheaders" | grep -i "Date:" | _head_n 1 | cut -d ':' -f 2- | tr -d "\r\n")"
+  _debug3 "_ntpdate" "$_ntpdate"
+  _ntpdate="$(echo "${_ntpdate}" | sed -e 's/^[[:space:]]*//')"
+  _debug3 "_NTPDATE" "$_ntpdate"
+  _ntptime="$(echo "${_ntpdate}" | _head_n 1 | cut -d " " -f 5 | tr -d "\r\n")"
+  _debug3 "_ntptime" "$_ntptime"
+  _eg_timestamp=$(date -u "+%Y%m%dT")
+  _eg_timestamp="$(printf "%s%s+0000" "$_eg_timestamp" "$_ntptime")"
+  _debug "_eg_timestamp" "$_eg_timestamp"
+}
+
+_edgedns_new_nonce() {
+  _debug "Generating Nonce"
+  _nonce=$(echo "EDGEDNS$(_time)" | _digest sha1 hex | cut -c 1-32)
+  _debug3 "_nonce" "$_nonce"
+}
+
+_edgedns_make_auth_header() {
+  _debug "Constructing Auth Header"
+  _edgedns_new_nonce
+  _edgedns_eg_timestamp
+  # "Unsigned authorization header: 'EG1-HMAC-SHA256 client_token=block;access_token=block;timestamp=20200806T14:16:33+0000;nonce=72cde72c-82d9-4721-9854-2ba057929d67;'"
+  _auth_header="$(printf "EG1-HMAC-SHA256 client_token=%s;access_token=%s;timestamp=%s;nonce=%s;" "$AKAMAI_CLIENT_TOKEN" "$AKAMAI_ACCESS_TOKEN" "$_eg_timestamp" "$_nonce")"
+  _secure_debug2 "Unsigned Auth Header: " "$_auth_header"
+
+  _edgedns_sign_request
+  _signed_auth_header="$(printf "%ssignature=%s" "$_auth_header" "$_signed_req")"
+  _secure_debug2 "Signed Auth Header: " "${_signed_auth_header}"
+}
+
+_edgedns_sign_request() {
+  _debug2 "Signing http request"
+  _edgedns_make_data_to_sign "$_auth_header"
+  _secure_debug2 "Returned signed data" "$_mdata"
+  _edgedns_make_signing_key "$_eg_timestamp"
+  _edgedns_base64_hmac_sha256 "$_mdata" "$_signing_key"
+  _signed_req="$_hmac_out"
+  _secure_debug2 "Signed Request" "$_signed_req"
+}
+
+_edgedns_make_signing_key() {
+  _debug2 "Creating sigining key"
+  ts=$1
+  _edgedns_base64_hmac_sha256 "$ts" "$AKAMAI_CLIENT_SECRET"
+  _signing_key="$_hmac_out"
+  _secure_debug2 "Signing Key" "$_signing_key"
+
+}
+
+_edgedns_make_data_to_sign() {
+  _debug2 "Processing data to sign"
+  hdr=$1
+  _secure_debug2 "hdr" "$hdr"
+  _edgedns_make_content_hash
+  path="$(echo "$_request_url_path" | tr -d "\n\r" | sed 's/https\?:\/\///')"
+  path=${path#*"$AKAMAI_HOST"}
+  _debug "hier path" "$path"
+  # dont expose headers to sign so use MT string
+  _mdata="$(printf "%s\thttps\t%s\t%s\t%s\t%s\t%s" "$_request_method" "$AKAMAI_HOST" "$path" "" "$_hash" "$hdr")"
+  _secure_debug2 "Data to Sign" "$_mdata"
+}
+
+_edgedns_make_content_hash() {
+  _debug2 "Generating content hash"
+  _hash=""
+  _debug2 "Request method" "${_request_method}"
+  if [ "$_request_method" != "POST" ] || [ -z "$_request_body" ]; then
+    return 0
+  fi
+  _debug2 "Req body" "$_request_body"
+  _edgedns_base64_sha256 "$_request_body"
+  _hash="$_sha256_out"
+  _debug2 "Content hash" "$_hash"
+}
+
+_edgedns_base64_hmac_sha256() {
+  _debug2 "Generating hmac"
+  data=$1
+  key=$2
+  encoded_data="$(echo "$data" | iconv -t utf-8)"
+  encoded_key="$(echo "$key" | iconv -t utf-8)"
+  _secure_debug2 "encoded data" "$encoded_data"
+  _secure_debug2 "encoded key" "$encoded_key"
+
+  encoded_key_hex=$(printf "%s" "$encoded_key" | _hex_dump | tr -d ' ')
+  data_sig="$(echo "$encoded_data" | tr -d "\n\r" | _hmac sha256 "$encoded_key_hex" | _base64)"
+
+  _secure_debug2 "data_sig:" "$data_sig"
+  _hmac_out="$(echo "$data_sig" | tr -d "\n\r" | iconv -f utf-8)"
+  _secure_debug2 "hmac" "$_hmac_out"
+}
+
+_edgedns_base64_sha256() {
+  _debug2 "Creating sha256 digest"
+  trg=$1
+  _secure_debug2 "digest data" "$trg"
+  digest="$(echo "$trg" | tr -d "\n\r" | _digest "sha256")"
+  _sha256_out="$(echo "$digest" | tr -d "\n\r" | iconv -f utf-8)"
+  _secure_debug2 "digest decode" "$_sha256_out"
+}
+
+#_edgedns_parse_edgerc() {
+#  filepath=$1
+#  section=$2
+#}

dnsapi/dns_fornex.sh

@@ -0,0 +1,146 @@
+#!/usr/bin/env sh
+
+#Author: Timur Umarov <[email protected]>
+
+FORNEX_API_URL="https://fornex.com/api/dns/v0.1"
+
+########  Public functions #####################
+
+#Usage: dns_fornex_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_fornex_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  if ! _Fornex_API; then
+    return 1
+  fi
+
+  if ! _get_root "$fulldomain"; then
+    _err "Unable to determine root domain"
+    return 1
+  else
+    _debug _domain "$_domain"
+  fi
+
+  _info "Adding record"
+  if _rest POST "$_domain/entry_set/add/" "host=$fulldomain&type=TXT&value=$txtvalue&apikey=$FORNEX_API_KEY"; then
+    _debug _response "$response"
+    if _contains "$response" '"ok": true' || _contains "$response" 'Такая запись уже существует.'; then
+      _info "Added, OK"
+      return 0
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+}
+
+#Usage: dns_fornex_rm   _acme-challenge.www.domain.com
+dns_fornex_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  if ! _Fornex_API; then
+    return 1
+  fi
+
+  if ! _get_root "$fulldomain"; then
+    _err "Unable to determine root domain"
+    return 1
+  else
+    _debug _domain "$_domain"
+  fi
+
+  _debug "Getting txt records"
+  _rest GET "$_domain/entry_set.json?apikey=$FORNEX_API_KEY"
+
+  if ! _contains "$response" "$txtvalue"; then
+    _err "Txt record not found"
+    return 1
+  fi
+
+  _record_id="$(echo "$response" | _egrep_o "{[^{]*\"value\"*:*\"$txtvalue\"[^}]*}" | sed -n -e 's#.*"id": \([0-9]*\).*#\1#p')"
+  _debug "_record_id" "$_record_id"
+  if [ -z "$_record_id" ]; then
+    _err "can not find _record_id"
+    return 1
+  fi
+
+  if ! _rest POST "$_domain/entry_set/$_record_id/delete/" "apikey=$FORNEX_API_KEY"; then
+    _err "Delete record error."
+    return 1
+  fi
+  return 0
+}
+
+####################  Private functions below ##################################
+
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+_get_root() {
+  domain=$1
+
+  i=1
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    if ! _rest GET "domain_list.json?q=$h&apikey=$FORNEX_API_KEY"; then
+      return 1
+    fi
+
+    if _contains "$response" "\"$h\"" >/dev/null; then
+      _domain=$h
+      return 0
+    else
+      _debug "$h not found"
+    fi
+    i=$(_math "$i" + 1)
+  done
+
+  return 1
+}
+
+_Fornex_API() {
+  FORNEX_API_KEY="${FORNEX_API_KEY:-$(_readaccountconf_mutable FORNEX_API_KEY)}"
+  if [ -z "$FORNEX_API_KEY" ]; then
+    FORNEX_API_KEY=""
+
+    _err "You didn't specify the Fornex API key yet."
+    _err "Please create your key and try again."
+
+    return 1
+  fi
+
+  _saveaccountconf_mutable FORNEX_API_KEY "$FORNEX_API_KEY"
+}
+
+#method method action data
+_rest() {
+  m=$1
+  ep="$2"
+  data="$3"
+  _debug "$ep"
+
+  export _H1="Accept: application/json"
+
+  if [ "$m" != "GET" ]; then
+    _debug data "$data"
+    response="$(_post "$data" "$FORNEX_API_URL/$ep" "" "$m")"
+  else
+    response="$(_get "$FORNEX_API_URL/$ep" | _normalizeJson)"
+  fi
+
+  _ret="$?"
+  if [ "$_ret" != "0" ]; then
+    _err "error $ep"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_gandi_livedns.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env sh
 
 # Gandi LiveDNS v5 API
-# http://doc.livedns.gandi.net/
+# https://doc.livedns.gandi.net/
 # currently under beta
 #
 # Requires GANDI API KEY set in GANDI_LIVEDNS_KEY set as environment variable

dnsapi/dns_gcloud.sh

@@ -39,7 +39,7 @@ dns_gcloud_rm() {
   _dns_gcloud_start_tr || return $?
   _dns_gcloud_get_rrdatas || return $?
   echo "$rrdatas" | _dns_gcloud_remove_rrs || return $?
-  echo "$rrdatas" | grep -F -v "\"$txtvalue\"" | _dns_gcloud_add_rrs || return $?
+  echo "$rrdatas" | grep -F -v -- "\"$txtvalue\"" | _dns_gcloud_add_rrs || return $?
   _dns_gcloud_execute_tr || return $?
 
   _info "$fulldomain record added"
@@ -98,7 +98,7 @@ _dns_gcloud_remove_rrs() {
     --ttl="$ttl" \
     --type=TXT \
     --zone="$managedZone" \
-    --transaction-file="$tr"; then
+    --transaction-file="$tr" --; then
     _debug tr "$(cat "$tr")"
     rm -r "$trd"
     _err "_dns_gcloud_remove_rrs: failed to remove RRs"
@@ -113,7 +113,7 @@ _dns_gcloud_add_rrs() {
     --ttl="$ttl" \
     --type=TXT \
     --zone="$managedZone" \
-    --transaction-file="$tr"; then
+    --transaction-file="$tr" --; then
     _debug tr "$(cat "$tr")"
     rm -r "$trd"
     _err "_dns_gcloud_add_rrs: failed to add RRs"
@@ -163,5 +163,8 @@ _dns_gcloud_get_rrdatas() {
     return 1
   fi
   ttl=$(echo "$rrdatas" | cut -f1)
-  rrdatas=$(echo "$rrdatas" | cut -f2 | sed 's/","/"\n"/g')
+  # starting with version 353.0.0 gcloud seems to
+  # separate records with a semicolon instead of commas
+  # see also https://cloud.google.com/sdk/docs/release-notes#35300_2021-08-17
+  rrdatas=$(echo "$rrdatas" | cut -f2 | sed 's/"[,;]"/"\n"/g')
 }

dnsapi/dns_gcore.sh

@@ -0,0 +1,187 @@
+#!/usr/bin/env sh
+
+#
+#GCORE_Key='773$7b7adaf2a2b32bfb1b83787b4ff32a67eb178e3ada1af733e47b1411f2461f7f4fa7ed7138e2772a46124377bad7384b3bb8d87748f87b3f23db4b8bbe41b2bb'
+#
+
+GCORE_Api="https://api.gcorelabs.com/dns/v2"
+GCORE_Doc="https://apidocs.gcore.com/dns"
+
+########  Public functions #####################
+
+#Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_gcore_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  GCORE_Key="${GCORE_Key:-$(_readaccountconf_mutable GCORE_Key)}"
+
+  if [ -z "$GCORE_Key" ]; then
+    GCORE_Key=""
+    _err "You didn't specify a Gcore api key yet."
+    _err "You can get yours from here $GCORE_Doc"
+    return 1
+  fi
+
+  #save the api key to the account conf file.
+  _saveaccountconf_mutable GCORE_Key "$GCORE_Key"
+
+  _debug "First detect the zone name"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _zone_name "$_zone_name"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting txt records"
+  _gcore_rest GET "zones/$_zone_name/$fulldomain/TXT"
+  payload=""
+
+  if echo "$response" | grep "record is not found" >/dev/null; then
+    _info "Record doesn't exists"
+    payload="{\"resource_records\":[{\"content\":[\"$txtvalue\"],\"enabled\":true}],\"ttl\":120}"
+  elif echo "$response" | grep "$txtvalue" >/dev/null; then
+    _info "Already exists, OK"
+    return 0
+  elif echo "$response" | tr -d " " | grep \"name\":\""$fulldomain"\",\"type\":\"TXT\" >/dev/null; then
+    _info "Record with mismatch txtvalue, try update it"
+    payload=$(echo "$response" | tr -d " " | sed 's/"updated_at":[0-9]\+,//g' | sed 's/"meta":{}}]}/"meta":{}},{"content":['\""$txtvalue"\"'],"enabled":true}]}/')
+  fi
+
+  # For wildcard cert, the main root domain and the wildcard domain have the same txt subdomain name, so
+  # we can not use updating anymore.
+  #  count=$(printf "%s\n" "$response" | _egrep_o "\"count\":[^,]*" | cut -d : -f 2)
+  #  _debug count "$count"
+  #  if [ "$count" = "0" ]; then
+  _info "Adding record"
+  if _gcore_rest PUT "zones/$_zone_name/$fulldomain/TXT" "$payload"; then
+    if _contains "$response" "$txtvalue"; then
+      _info "Added, OK"
+      return 0
+    elif _contains "$response" "rrset is already exists"; then
+      _info "Already exists, OK"
+      return 0
+    else
+      _err "Add txt record error."
+      return 1
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+}
+
+#fulldomain txtvalue
+dns_gcore_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  GCORE_Key="${GCORE_Key:-$(_readaccountconf_mutable GCORE_Key)}"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _zone_name "$_zone_name"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting txt records"
+  _gcore_rest GET "zones/$_zone_name/$fulldomain/TXT"
+
+  if echo "$response" | grep "record is not found" >/dev/null; then
+    _info "No such txt recrod"
+    return 0
+  fi
+
+  if ! echo "$response" | tr -d " " | grep \"name\":\""$fulldomain"\",\"type\":\"TXT\" >/dev/null; then
+    _err "Error: $response"
+    return 1
+  fi
+
+  if ! echo "$response" | tr -d " " | grep \""$txtvalue"\" >/dev/null; then
+    _info "No such txt recrod"
+    return 0
+  fi
+
+  count="$(echo "$response" | grep -o "content" | wc -l)"
+
+  if [ "$count" = "1" ]; then
+    if ! _gcore_rest DELETE "zones/$_zone_name/$fulldomain/TXT"; then
+      _err "Delete record error. $response"
+      return 1
+    fi
+    return 0
+  fi
+
+  payload="$(echo "$response" | tr -d " " | sed 's/"updated_at":[0-9]\+,//g' | sed 's/{"id":[0-9]\+,"content":\["'"$txtvalue"'"\],"enabled":true,"meta":{}}//' | sed 's/\[,/\[/' | sed 's/,,/,/' | sed 's/,\]/\]/')"
+  if ! _gcore_rest PUT "zones/$_zone_name/$fulldomain/TXT" "$payload"; then
+    _err "Delete record error. $response"
+  fi
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.sub.domain.com
+#returns
+# _sub_domain=_acme-challenge.sub or _acme-challenge
+# _domain=domain.com
+# _zone_name=domain.com or sub.domain.com
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    if ! _gcore_rest GET "zones/$h"; then
+      return 1
+    fi
+
+    if _contains "$response" "\"name\":\"$h\""; then
+      _zone_name=$h
+      if [ "$_zone_name" ]; then
+        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+        _domain=$h
+        return 0
+      fi
+      return 1
+    fi
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+_gcore_rest() {
+  m=$1
+  ep="$2"
+  data="$3"
+  _debug "$ep"
+
+  key_trimmed=$(echo "$GCORE_Key" | tr -d '"')
+
+  export _H1="Content-Type: application/json"
+  export _H2="Authorization: APIKey $key_trimmed"
+
+  if [ "$m" != "GET" ]; then
+    _debug data "$data"
+    response="$(_post "$data" "$GCORE_Api/$ep" "" "$m")"
+  else
+    response="$(_get "$GCORE_Api/$ep")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "error $ep"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_gd.sh

@@ -1,10 +1,12 @@
 #!/usr/bin/env sh
 
 #Godaddy domain api
+# Get API key and secret from https://developer.godaddy.com/
 #
-#GD_Key="sdfsdfsdfljlbjkljlkjsdfoiwje"
+# GD_Key="sdfsdfsdfljlbjkljlkjsdfoiwje"
+# GD_Secret="asdfsdfsfsdfsdfdfsdf"
 #
-#GD_Secret="asdfsdfsfsdfsdfdfsdf"
+# Ex.: acme.sh --issue --staging --dns dns_gd -d "*.s.example.com" -d "s.example.com"
 
 GD_Api="https://api.godaddy.com/v1"
 
@@ -20,8 +22,8 @@ dns_gd_add() {
   if [ -z "$GD_Key" ] || [ -z "$GD_Secret" ]; then
     GD_Key=""
     GD_Secret=""
-    _err "You don't specify godaddy api key and secret yet."
-    _err "Please create you key and try again."
+    _err "You didn't specify godaddy api key and secret yet."
+    _err "Please create your key and try again."
     return 1
   fi
 
@@ -44,14 +46,15 @@ dns_gd_add() {
   fi
 
   if _contains "$response" "$txtvalue"; then
-    _info "The record is existing, skip"
+    _info "This record already exists, skipping"
     return 0
   fi
 
   _add_data="{\"data\":\"$txtvalue\"}"
   for t in $(echo "$response" | tr '{' "\n" | grep "\"name\":\"$_sub_domain\"" | tr ',' "\n" | grep '"data"' | cut -d : -f 2); do
     _debug2 t "$t"
-    if [ "$t" ]; then
+    # ignore empty (previously removed) records, to prevent useless _acme-challenge TXT entries
+    if [ "$t" ] && [ "$t" != '""' ]; then
       _add_data="$_add_data,{\"data\":$t}"
     fi
   done
@@ -59,13 +62,25 @@ dns_gd_add() {
 
   _info "Adding record"
   if _gd_rest PUT "domains/$_domain/records/TXT/$_sub_domain" "[$_add_data]"; then
-    _info "Added, sleeping 10 seconds"
-    _sleep 10
-    #todo: check if the record takes effect
-    return 0
+    _debug "Checking updated records of '${fulldomain}'"
+
+    if ! _gd_rest GET "domains/$_domain/records/TXT/$_sub_domain"; then
+      _err "Validating TXT record for '${fulldomain}' with rest error [$?]." "$response"
+      return 1
+    fi
+
+    if ! _contains "$response" "$txtvalue"; then
+      _err "TXT record '${txtvalue}' for '${fulldomain}', value wasn't set!"
+      return 1
+    fi
+  else
+    _err "Add txt record error, value '${txtvalue}' for '${fulldomain}' was not set."
+    return 1
   fi
-  _err "Add txt record error."
-  return 1
+
+  _sleep 10
+  _info "Added TXT record '${txtvalue}' for '${fulldomain}'."
+  return 0
 }
 
 #fulldomain
@@ -107,11 +122,20 @@ dns_gd_rm() {
     fi
   done
   if [ -z "$_add_data" ]; then
-    _add_data="{\"data\":\"\"}"
+    # delete empty record
+    _debug "Delete last record for '${fulldomain}'"
+    if ! _gd_rest DELETE "domains/$_domain/records/TXT/$_sub_domain"; then
+      _err "Cannot delete empty TXT record for '$fulldomain'"
+      return 1
+    fi
+  else
+    # remove specific TXT value, keeping other entries
+    _debug2 _add_data "$_add_data"
+    if ! _gd_rest PUT "domains/$_domain/records/TXT/$_sub_domain" "[$_add_data]"; then
+      _err "Cannot update TXT record for '$fulldomain'"
+      return 1
+    fi
   fi
-  _debug2 _add_data "$_add_data"
-
-  _gd_rest PUT "domains/$_domain/records/TXT/$_sub_domain" "[$_add_data]"
 }
 
 ####################  Private functions below ##################################
@@ -156,15 +180,15 @@ _gd_rest() {
   export _H1="Authorization: sso-key $GD_Key:$GD_Secret"
   export _H2="Content-Type: application/json"
 
-  if [ "$data" ]; then
-    _debug data "$data"
+  if [ "$data" ] || [ "$m" = "DELETE" ]; then
+    _debug "data ($m): " "$data"
     response="$(_post "$data" "$GD_Api/$ep" "" "$m")"
   else
     response="$(_get "$GD_Api/$ep")"
   fi
 
   if [ "$?" != "0" ]; then
-    _err "error $ep"
+    _err "error on rest call ($m): $ep"
     return 1
   fi
   _debug2 response "$response"

dnsapi/dns_gdnsdk.sh

@@ -1,177 +0,0 @@
-#!/usr/bin/env sh
-#Author: Herman Sletteng
-#Report Bugs here: https://github.com/loial/acme.sh
-#
-#
-# Note, gratisdns requires a login first, so the script needs to handle
-# temporary cookies. Since acme.sh _get/_post currently don't directly support
-# cookies, I've defined wrapper functions _myget/_mypost to set the headers
-
-GDNSDK_API="https://admin.gratisdns.com"
-########  Public functions #####################
-#Usage: dns_gdnsdk_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
-dns_gdnsdk_add() {
-  fulldomain=$1
-  txtvalue=$2
-  _info "Using gratisdns.dk"
-  _debug fulldomain "$fulldomain"
-  _debug txtvalue "$txtvalue"
-  if ! _gratisdns_login; then
-    _err "Login failed!"
-    return 1
-  fi
-  #finding domain zone
-  if ! _get_domain; then
-    _err "No matching root domain for $fulldomain found"
-    return 1
-  fi
-  # adding entry
-  _info "Adding the entry"
-  _mypost "action=dns_primary_record_added_txt&user_domain=$_domain&name=$fulldomain&txtdata=$txtvalue&ttl=1"
-  if _successful_update; then return 0; fi
-  _err "Couldn't create entry!"
-  return 1
-}
-
-#Usage: fulldomain txtvalue
-#Remove the txt record after validation.
-dns_gdnsdk_rm() {
-  fulldomain=$1
-  txtvalue=$2
-  _info "Using gratisdns.dk"
-  _debug fulldomain "$fulldomain"
-  _debug txtvalue "$txtvalue"
-  if ! _gratisdns_login; then
-    _err "Login failed!"
-    return 1
-  fi
-  if ! _get_domain; then
-    _err "No matching root domain for $fulldomain found"
-    return 1
-  fi
-  _findentry "$fulldomain" "$txtvalue"
-  if [ -z "$_id" ]; then
-    _info "Entry doesn't exist, nothing to delete"
-    return 0
-  fi
-  _debug "Deleting record..."
-  _mypost "action=dns_primary_delete_txt&user_domain=$_domain&id=$_id"
-  # removing entry
-
-  if _successful_update; then return 0; fi
-  _err "Couldn't delete entry!"
-  return 1
-}
-
-####################  Private functions below ##################################
-
-_checkcredentials() {
-  GDNSDK_Username="${GDNSDK_Username:-$(_readaccountconf_mutable GDNSDK_Username)}"
-  GDNSDK_Password="${GDNSDK_Password:-$(_readaccountconf_mutable GDNSDK_Password)}"
-
-  if [ -z "$GDNSDK_Username" ] || [ -z "$GDNSDK_Password" ]; then
-    GDNSDK_Username=""
-    GDNSDK_Password=""
-    _err "You haven't specified gratisdns.dk username and password yet."
-    _err "Please add credentials and try again."
-    return 1
-  fi
-  #save the credentials to the account conf file.
-  _saveaccountconf_mutable GDNSDK_Username "$GDNSDK_Username"
-  _saveaccountconf_mutable GDNSDK_Password "$GDNSDK_Password"
-  return 0
-}
-
-_checkcookie() {
-  GDNSDK_Cookie="${GDNSDK_Cookie:-$(_readaccountconf_mutable GDNSDK_Cookie)}"
-  if [ -z "$GDNSDK_Cookie" ]; then
-    _debug "No cached cookie found"
-    return 1
-  fi
-  _myget "action="
-  if (echo "$_result" | grep -q "logmeout"); then
-    _debug "Cached cookie still valid"
-    return 0
-  fi
-  _debug "Cached cookie no longer valid"
-  GDNSDK_Cookie=""
-  _saveaccountconf_mutable GDNSDK_Cookie "$GDNSDK_Cookie"
-  return 1
-}
-
-_gratisdns_login() {
-  if ! _checkcredentials; then return 1; fi
-
-  if _checkcookie; then
-    _debug "Already logged in"
-    return 0
-  fi
-  _debug "Logging into GratisDNS with user $GDNSDK_Username"
-
-  if ! _mypost "login=$GDNSDK_Username&password=$GDNSDK_Password&action=logmein"; then
-    _err "GratisDNS login failed for user $GDNSDK_Username bad RC from _post"
-    return 1
-  fi
-
-  GDNSDK_Cookie="$(grep -A 15 '302 Found' "$HTTP_HEADER" | _egrep_o 'Cookie: [^;]*' | _head_n 1 | cut -d ' ' -f2)"
-
-  if [ -z "$GDNSDK_Cookie" ]; then
-    _err "GratisDNS login failed for user $GDNSDK_Username. Check $HTTP_HEADER file"
-    return 1
-  fi
-  export GDNSDK_Cookie
-  _saveaccountconf_mutable GDNSDK_Cookie "$GDNSDK_Cookie"
-  return 0
-}
-
-_myget() {
-  #Adds cookie to request
-  export _H1="Cookie: $GDNSDK_Cookie"
-  _result=$(_get "$GDNSDK_API?$1")
-}
-_mypost() {
-  #Adds cookie to request
-  export _H1="Cookie: $GDNSDK_Cookie"
-  _result=$(_post "$1" "$GDNSDK_API")
-}
-
-_get_domain() {
-  _myget 'action=dns_primarydns'
-  _domains=$(echo "$_result" | _egrep_o ' domain="[[:alnum:]._-]+' | sed 's/^.*"//')
-  if [ -z "$_domains" ]; then
-    _err "Primary domain list not found!"
-    return 1
-  fi
-  for _domain in $_domains; do
-    if (_endswith "$fulldomain" "$_domain"); then
-      _debug "Root domain: $_domain"
-      return 0
-    fi
-  done
-  return 1
-}
-
-_successful_update() {
-  if (echo "$_result" | grep -q 'table-success'); then return 0; fi
-  return 1
-}
-
-_findentry() {
-  #args    $1: fulldomain, $2: txtvalue
-  #returns id of dns entry, if it exists
-  _myget "action=dns_primary_changeDNSsetup&user_domain=$_domain"
-  _debug3 "_result: $_result"
-
-  _tmp_result=$(echo "$_result" | tr -d '\n\r' | _egrep_o "<td>$1</td>\s*<td>$2</td>[^?]*[^&]*&id=[^&]*")
-  _debug _tmp_result "$_tmp_result"
-  if [ -z "${_tmp_result:-}" ]; then
-    _debug "The variable is _tmp_result is not supposed to be empty, there may be something wrong with the script"
-  fi
-
-  _id=$(echo "$_tmp_result" | sed 's/^.*=//')
-  if [ -n "$_id" ]; then
-    _debug "Entry found with _id=$_id"
-    return 0
-  fi
-  return 1
-}

dnsapi/dns_geoscaling.sh

@@ -0,0 +1,232 @@
+#!/usr/bin/env sh
+
+########################################################################
+# Geoscaling hook script for acme.sh
+#
+# Environment variables:
+#
+#  - $GEOSCALING_Username  (your Geoscaling username - this is usually NOT an amail address)
+#  - $GEOSCALING_Password  (your Geoscaling password)
+
+#-- dns_geoscaling_add() - Add TXT record --------------------------------------
+# Usage: dns_geoscaling_add _acme-challenge.subdomain.domain.com "XyZ123..."
+
+dns_geoscaling_add() {
+  full_domain=$1
+  txt_value=$2
+  _info "Using DNS-01 Geoscaling DNS2 hook"
+
+  GEOSCALING_Username="${GEOSCALING_Username:-$(_readaccountconf_mutable GEOSCALING_Username)}"
+  GEOSCALING_Password="${GEOSCALING_Password:-$(_readaccountconf_mutable GEOSCALING_Password)}"
+  if [ -z "$GEOSCALING_Username" ] || [ -z "$GEOSCALING_Password" ]; then
+    GEOSCALING_Username=
+    GEOSCALING_Password=
+    _err "No auth details provided. Please set user credentials using the \$GEOSCALING_Username and \$GEOSCALING_Password environment variables."
+    return 1
+  fi
+  _saveaccountconf_mutable GEOSCALING_Username "${GEOSCALING_Username}"
+  _saveaccountconf_mutable GEOSCALING_Password "${GEOSCALING_Password}"
+
+  # Fills in the $zone_id and $zone_name
+  find_zone "${full_domain}" || return 1
+  _debug "Zone id '${zone_id}' will be used."
+
+  # We're logged in here
+
+  # we should add ${full_domain} minus the trailing ${zone_name}
+
+  prefix=$(echo "${full_domain}" | sed "s|\\.${zone_name}\$||")
+
+  body="id=${zone_id}&name=${prefix}&type=TXT&content=${txt_value}&ttl=300&prio=0"
+
+  do_post "$body" "https://www.geoscaling.com/dns2/ajax/add_record.php"
+  exit_code="$?"
+  if [ "${exit_code}" -eq 0 ]; then
+    _info "TXT record added successfully."
+  else
+    _err "Couldn't add the TXT record."
+  fi
+  do_logout
+  return "${exit_code}"
+}
+
+#-- dns_geoscaling_rm() - Remove TXT record ------------------------------------
+# Usage: dns_geoscaling_rm _acme-challenge.subdomain.domain.com "XyZ123..."
+
+dns_geoscaling_rm() {
+  full_domain=$1
+  txt_value=$2
+  _info "Cleaning up after DNS-01 Geoscaling DNS2 hook"
+
+  GEOSCALING_Username="${GEOSCALING_Username:-$(_readaccountconf_mutable GEOSCALING_Username)}"
+  GEOSCALING_Password="${GEOSCALING_Password:-$(_readaccountconf_mutable GEOSCALING_Password)}"
+  if [ -z "$GEOSCALING_Username" ] || [ -z "$GEOSCALING_Password" ]; then
+    GEOSCALING_Username=
+    GEOSCALING_Password=
+    _err "No auth details provided. Please set user credentials using the \$GEOSCALING_Username and \$GEOSCALING_Password environment variables."
+    return 1
+  fi
+  _saveaccountconf_mutable GEOSCALING_Username "${GEOSCALING_Username}"
+  _saveaccountconf_mutable GEOSCALING_Password "${GEOSCALING_Password}"
+
+  # fills in the $zone_id
+  find_zone "${full_domain}" || return 1
+  _debug "Zone id '${zone_id}' will be used."
+
+  # Here we're logged in
+  # Find the record id to clean
+
+  # get the domain
+  response=$(do_get "https://www.geoscaling.com/dns2/index.php?module=domain&id=${zone_id}")
+  _debug2 "response" "$response"
+
+  table="$(echo "${response}" | tr -d '\n' | sed 's|.*<div class="box"><div class="boxtitle">Basic Records</div><div class="boxtext"><table|<table|; s|</table>.*|</table>|')"
+  _debug2 table "${table}"
+  names=$(echo "${table}" | _egrep_o 'id="[0-9]+\.name">[^<]*</td>' | sed 's|</td>||; s|.*>||')
+  ids=$(echo "${table}" | _egrep_o 'id="[0-9]+\.name">[^<]*</td>' | sed 's|\.name">.*||; s|id="||')
+  types=$(echo "${table}" | _egrep_o 'id="[0-9]+\.type">[^<]*</td>' | sed 's|</td>||; s|.*>||')
+  values=$(echo "${table}" | _egrep_o 'id="[0-9]+\.content">[^<]*</td>' | sed 's|</td>||; s|.*>||')
+
+  _debug2 names "${names}"
+  _debug2 ids "${ids}"
+  _debug2 types "${types}"
+  _debug2 values "${values}"
+
+  # look for line whose name is ${full_domain}, whose type is TXT, and whose value is ${txt_value}
+  line_num="$(echo "${values}" | grep -F -n -- "${txt_value}" | _head_n 1 | cut -d ':' -f 1)"
+  _debug2 line_num "${line_num}"
+  found_id=
+  if [ -n "$line_num" ]; then
+    type=$(echo "${types}" | sed -n "${line_num}p")
+    name=$(echo "${names}" | sed -n "${line_num}p")
+    id=$(echo "${ids}" | sed -n "${line_num}p")
+
+    _debug2 type "$type"
+    _debug2 name "$name"
+    _debug2 id "$id"
+    _debug2 full_domain "$full_domain"
+
+    if [ "${type}" = "TXT" ] && [ "${name}" = "${full_domain}" ]; then
+      found_id=${id}
+    fi
+  fi
+
+  if [ "${found_id}" = "" ]; then
+    _err "Can not find record id."
+    return 0
+  fi
+
+  # Remove the record
+  body="id=${zone_id}&record_id=${found_id}"
+  response=$(do_post "$body" "https://www.geoscaling.com/dns2/ajax/delete_record.php")
+  exit_code="$?"
+  if [ "$exit_code" -eq 0 ]; then
+    _info "Record removed successfully."
+  else
+    _err "Could not clean (remove) up the record. Please go to Geoscaling administration interface and clean it by hand."
+  fi
+  do_logout
+  return "${exit_code}"
+}
+
+########################## PRIVATE FUNCTIONS ###########################
+
+do_get() {
+  _url=$1
+  export _H1="Cookie: $geoscaling_phpsessid_cookie"
+  _get "${_url}"
+}
+
+do_post() {
+  _body=$1
+  _url=$2
+  export _H1="Cookie: $geoscaling_phpsessid_cookie"
+  _post "${_body}" "${_url}"
+}
+
+do_login() {
+
+  _info "Logging in..."
+
+  username_encoded="$(printf "%s" "${GEOSCALING_Username}" | _url_encode)"
+  password_encoded="$(printf "%s" "${GEOSCALING_Password}" | _url_encode)"
+  body="username=${username_encoded}&password=${password_encoded}"
+
+  response=$(_post "$body" "https://www.geoscaling.com/dns2/index.php?module=auth")
+  _debug2 response "${response}"
+
+  #retcode=$(grep '^HTTP[^ ]*' "${HTTP_HEADER}" | _head_n 1 | _egrep_o '[0-9]+$')
+  retcode=$(grep '^HTTP[^ ]*' "${HTTP_HEADER}" | _head_n 1 | cut -d ' ' -f 2)
+
+  if [ "$retcode" != "302" ]; then
+    _err "Geoscaling login failed for user ${GEOSCALING_Username}. Check ${HTTP_HEADER} file"
+    return 1
+  fi
+
+  geoscaling_phpsessid_cookie="$(grep -i '^set-cookie:' "${HTTP_HEADER}" | _egrep_o 'PHPSESSID=[^;]*;' | tr -d ';')"
+  return 0
+
+}
+
+do_logout() {
+  _info "Logging out."
+  response="$(do_get "https://www.geoscaling.com/dns2/index.php?module=auth")"
+  _debug2 response "$response"
+  return 0
+}
+
+find_zone() {
+  domain="$1"
+
+  # do login
+  do_login || return 1
+
+  # get zones
+  response="$(do_get "https://www.geoscaling.com/dns2/index.php?module=domains")"
+
+  table="$(echo "${response}" | tr -d '\n' | sed 's|.*<div class="box"><div class="boxtitle">Your domains</div><div class="boxtext"><table|<table|; s|</table>.*|</table>|')"
+  _debug2 table "${table}"
+  zone_names="$(echo "${table}" | _egrep_o '<b>[^<]*</b>' | sed 's|<b>||;s|</b>||')"
+  _debug2 _matches "${zone_names}"
+  # Zone names and zone IDs are in same order
+  zone_ids=$(echo "${table}" | _egrep_o '<a href=.index\.php\?module=domain&id=[0-9]+. onclick="javascript:show_loader\(\);">' | sed 's|.*id=||;s|. .*||')
+
+  _debug2 "These are the zones on this Geoscaling account:"
+  _debug2 "zone_names" "${zone_names}"
+  _debug2 "And these are their respective IDs:"
+  _debug2 "zone_ids" "${zone_ids}"
+  if [ -z "${zone_names}" ] || [ -z "${zone_ids}" ]; then
+    _err "Can not get zone names or IDs."
+    return 1
+  fi
+  # Walk through all possible zone names
+  strip_counter=1
+  while true; do
+    attempted_zone=$(echo "${domain}" | cut -d . -f ${strip_counter}-)
+
+    # All possible zone names have been tried
+    if [ -z "${attempted_zone}" ]; then
+      _err "No zone for domain '${domain}' found."
+      return 1
+    fi
+
+    _debug "Looking for zone '${attempted_zone}'"
+
+    line_num="$(echo "${zone_names}" | grep -n "^${attempted_zone}\$" | _head_n 1 | cut -d : -f 1)"
+    _debug2 line_num "${line_num}"
+    if [ "$line_num" ]; then
+      zone_id=$(echo "${zone_ids}" | sed -n "${line_num}p")
+      zone_name=$(echo "${zone_names}" | sed -n "${line_num}p")
+      if [ -z "${zone_id}" ]; then
+        _err "Can not find zone id."
+        return 1
+      fi
+      _debug "Found relevant zone '${attempted_zone}' with id '${zone_id}' - will be used for domain '${domain}'."
+      return 0
+    fi
+
+    _debug "Zone '${attempted_zone}' doesn't exist, let's try a less specific zone."
+    strip_counter=$(_math "${strip_counter}" + 1)
+  done
+}
+# vim: et:ts=2:sw=2:

dnsapi/dns_googledomains.sh

@@ -0,0 +1,173 @@
+#!/usr/bin/env sh
+
+# Author: Alex Leigh <leigh at alexleigh dot me>
+# Created: 2023-03-02
+
+#GOOGLEDOMAINS_ACCESS_TOKEN="xxxx"
+#GOOGLEDOMAINS_ZONE="xxxx"
+GOOGLEDOMAINS_API="https://acmedns.googleapis.com/v1/acmeChallengeSets"
+
+######## Public functions ########
+
+#Usage: dns_googledomains_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_googledomains_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Invoking Google Domains ACME DNS API."
+
+  if ! _dns_googledomains_setup; then
+    return 1
+  fi
+
+  zone="$(_dns_googledomains_get_zone "$fulldomain")"
+  if [ -z "$zone" ]; then
+    _err "Could not find a Google Domains-managed zone containing the requested domain."
+    return 1
+  fi
+
+  _debug zone "$zone"
+  _debug txtvalue "$txtvalue"
+
+  _info "Adding TXT record for $fulldomain."
+  if _dns_googledomains_api "$zone" ":rotateChallenges" "{\"accessToken\":\"$GOOGLEDOMAINS_ACCESS_TOKEN\",\"recordsToAdd\":[{\"fqdn\":\"$fulldomain\",\"digest\":\"$txtvalue\"}],\"keepExpiredRecords\":true}"; then
+    if _contains "$response" "$txtvalue"; then
+      _info "TXT record added."
+      return 0
+    else
+      _err "Error adding TXT record."
+      return 1
+    fi
+  fi
+
+  _err "Error adding TXT record."
+  return 1
+}
+
+#Usage: dns_googledomains_rm   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_googledomains_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Invoking Google Domains ACME DNS API."
+
+  if ! _dns_googledomains_setup; then
+    return 1
+  fi
+
+  zone="$(_dns_googledomains_get_zone "$fulldomain")"
+  if [ -z "$zone" ]; then
+    _err "Could not find a Google Domains-managed domain based on request."
+    return 1
+  fi
+
+  _debug zone "$zone"
+  _debug txtvalue "$txtvalue"
+
+  _info "Removing TXT record for $fulldomain."
+  if _dns_googledomains_api "$zone" ":rotateChallenges" "{\"accessToken\":\"$GOOGLEDOMAINS_ACCESS_TOKEN\",\"recordsToRemove\":[{\"fqdn\":\"$fulldomain\",\"digest\":\"$txtvalue\"}],\"keepExpiredRecords\":true}"; then
+    if _contains "$response" "$txtvalue"; then
+      _err "Error removing TXT record."
+      return 1
+    else
+      _info "TXT record removed."
+      return 0
+    fi
+  fi
+
+  _err "Error removing TXT record."
+  return 1
+}
+
+######## Private functions ########
+
+_dns_googledomains_setup() {
+  if [ -n "$GOOGLEDOMAINS_SETUP_COMPLETED" ]; then
+    return 0
+  fi
+
+  GOOGLEDOMAINS_ACCESS_TOKEN="${GOOGLEDOMAINS_ACCESS_TOKEN:-$(_readaccountconf_mutable GOOGLEDOMAINS_ACCESS_TOKEN)}"
+  GOOGLEDOMAINS_ZONE="${GOOGLEDOMAINS_ZONE:-$(_readaccountconf_mutable GOOGLEDOMAINS_ZONE)}"
+
+  if [ -z "$GOOGLEDOMAINS_ACCESS_TOKEN" ]; then
+    GOOGLEDOMAINS_ACCESS_TOKEN=""
+    _err "Google Domains access token was not specified."
+    _err "Please visit Google Domains Security settings to provision an ACME DNS API access token."
+    return 1
+  fi
+
+  if [ "$GOOGLEDOMAINS_ZONE" ]; then
+    _savedomainconf GOOGLEDOMAINS_ACCESS_TOKEN "$GOOGLEDOMAINS_ACCESS_TOKEN"
+    _savedomainconf GOOGLEDOMAINS_ZONE "$GOOGLEDOMAINS_ZONE"
+  else
+    _saveaccountconf_mutable GOOGLEDOMAINS_ACCESS_TOKEN "$GOOGLEDOMAINS_ACCESS_TOKEN"
+    _clearaccountconf_mutable GOOGLEDOMAINS_ZONE
+    _clearaccountconf GOOGLEDOMAINS_ZONE
+  fi
+
+  _debug GOOGLEDOMAINS_ACCESS_TOKEN "$GOOGLEDOMAINS_ACCESS_TOKEN"
+  _debug GOOGLEDOMAINS_ZONE "$GOOGLEDOMAINS_ZONE"
+
+  GOOGLEDOMAINS_SETUP_COMPLETED=1
+  return 0
+}
+
+_dns_googledomains_get_zone() {
+  domain=$1
+
+  # Use zone directly if provided
+  if [ "$GOOGLEDOMAINS_ZONE" ]; then
+    if ! _dns_googledomains_api "$GOOGLEDOMAINS_ZONE"; then
+      return 1
+    fi
+
+    echo "$GOOGLEDOMAINS_ZONE"
+    return 0
+  fi
+
+  i=2
+  while true; do
+    curr=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    _debug curr "$curr"
+
+    if [ -z "$curr" ]; then
+      return 1
+    fi
+
+    if _dns_googledomains_api "$curr"; then
+      echo "$curr"
+      return 0
+    fi
+
+    i=$(_math "$i" + 1)
+  done
+
+  return 1
+}
+
+_dns_googledomains_api() {
+  zone=$1
+  apimethod=$2
+  data="$3"
+
+  if [ -z "$data" ]; then
+    response="$(_get "$GOOGLEDOMAINS_API/$zone$apimethod")"
+  else
+    _debug data "$data"
+    export _H1="Content-Type: application/json"
+    response="$(_post "$data" "$GOOGLEDOMAINS_API/$zone$apimethod")"
+  fi
+
+  _debug response "$response"
+
+  if [ "$?" != "0" ]; then
+    _err "Error"
+    return 1
+  fi
+
+  if _contains "$response" "\"error\": {"; then
+    return 1
+  fi
+
+  return 0
+}

dnsapi/dns_he.sh

@@ -85,7 +85,7 @@ dns_he_rm() {
     _debug "The txt record is not found, just skip"
     return 0
   fi
-  _record_id="$(echo "$response" | tr -d "#" | sed "s/<tr/#<tr/g" | tr -d "\n" | tr "#" "\n" | grep "$_full_domain" | grep '"dns_tr"' | grep "$_txt_value" | cut -d '"' -f 4)"
+  _record_id="$(echo "$response" | tr -d "#" | sed "s/<tr/#<tr/g" | tr -d "\n" | tr "#" "\n" | grep "$_full_domain" | grep '"dns_tr"' | grep -- "$_txt_value" | cut -d '"' -f 4)"
   _debug2 _record_id "$_record_id"
   if [ -z "$_record_id" ]; then
     _err "Can not find record id"

dnsapi/dns_huaweicloud.sh

@@ -0,0 +1,327 @@
+#!/usr/bin/env sh
+
+# HUAWEICLOUD_Username
+# HUAWEICLOUD_Password
+# HUAWEICLOUD_DomainName
+
+iam_api="https://iam.myhuaweicloud.com"
+dns_api="https://dns.ap-southeast-1.myhuaweicloud.com" # Should work
+
+########  Public functions #####################
+
+# Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to add txt record
+#
+# Ref: https://support.huaweicloud.com/intl/zh-cn/api-dns/zh-cn_topic_0132421999.html
+#
+# About "DomainName" parameters see: https://support.huaweicloud.com/api-iam/iam_01_0006.html
+#
+
+dns_huaweicloud_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  HUAWEICLOUD_Username="${HUAWEICLOUD_Username:-$(_readaccountconf_mutable HUAWEICLOUD_Username)}"
+  HUAWEICLOUD_Password="${HUAWEICLOUD_Password:-$(_readaccountconf_mutable HUAWEICLOUD_Password)}"
+  HUAWEICLOUD_DomainName="${HUAWEICLOUD_DomainName:-$(_readaccountconf_mutable HUAWEICLOUD_DomainName)}"
+
+  # Check information
+  if [ -z "${HUAWEICLOUD_Username}" ] || [ -z "${HUAWEICLOUD_Password}" ] || [ -z "${HUAWEICLOUD_DomainName}" ]; then
+    _err "Not enough information provided to dns_huaweicloud!"
+    return 1
+  fi
+
+  unset token # Clear token
+  token="$(_get_token "${HUAWEICLOUD_Username}" "${HUAWEICLOUD_Password}" "${HUAWEICLOUD_DomainName}")"
+  if [ -z "${token}" ]; then # Check token
+    _err "dns_api(dns_huaweicloud): Error getting token."
+    return 1
+  fi
+  _secure_debug "Access token is:" "${token}"
+
+  unset zoneid
+  zoneid="$(_get_zoneid "${token}" "${fulldomain}")"
+  if [ -z "${zoneid}" ]; then
+    _err "dns_api(dns_huaweicloud): Error getting zone id."
+    return 1
+  fi
+  _debug "Zone ID is:" "${zoneid}"
+
+  _debug "Adding Record"
+  _add_record "${token}" "${fulldomain}" "${txtvalue}"
+  ret="$?"
+  if [ "${ret}" != "0" ]; then
+    _err "dns_api(dns_huaweicloud): Error adding record."
+    return 1
+  fi
+
+  # Do saving work if all succeeded
+  _saveaccountconf_mutable HUAWEICLOUD_Username "${HUAWEICLOUD_Username}"
+  _saveaccountconf_mutable HUAWEICLOUD_Password "${HUAWEICLOUD_Password}"
+  _saveaccountconf_mutable HUAWEICLOUD_DomainName "${HUAWEICLOUD_DomainName}"
+  return 0
+}
+
+# Usage: fulldomain txtvalue
+# Used to remove the txt record after validation
+#
+# Ref: https://support.huaweicloud.com/intl/zh-cn/api-dns/dns_api_64005.html
+#
+
+dns_huaweicloud_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  HUAWEICLOUD_Username="${HUAWEICLOUD_Username:-$(_readaccountconf_mutable HUAWEICLOUD_Username)}"
+  HUAWEICLOUD_Password="${HUAWEICLOUD_Password:-$(_readaccountconf_mutable HUAWEICLOUD_Password)}"
+  HUAWEICLOUD_DomainName="${HUAWEICLOUD_DomainName:-$(_readaccountconf_mutable HUAWEICLOUD_DomainName)}"
+
+  # Check information
+  if [ -z "${HUAWEICLOUD_Username}" ] || [ -z "${HUAWEICLOUD_Password}" ] || [ -z "${HUAWEICLOUD_DomainName}" ]; then
+    _err "Not enough information provided to dns_huaweicloud!"
+    return 1
+  fi
+
+  unset token # Clear token
+  token="$(_get_token "${HUAWEICLOUD_Username}" "${HUAWEICLOUD_Password}" "${HUAWEICLOUD_DomainName}")"
+  if [ -z "${token}" ]; then # Check token
+    _err "dns_api(dns_huaweicloud): Error getting token."
+    return 1
+  fi
+  _secure_debug "Access token is:" "${token}"
+
+  unset zoneid
+  zoneid="$(_get_zoneid "${token}" "${fulldomain}")"
+  if [ -z "${zoneid}" ]; then
+    _err "dns_api(dns_huaweicloud): Error getting zone id."
+    return 1
+  fi
+  _debug "Zone ID is:" "${zoneid}"
+
+  record_id="$(_get_recordset_id "${token}" "${fulldomain}" "${zoneid}")"
+  _recursive_rm_record "${token}" "${fulldomain}" "${zoneid}" "${record_id}"
+  ret="$?"
+  if [ "${ret}" != "0" ]; then
+    _err "dns_api(dns_huaweicloud): Error removing record."
+    return 1
+  fi
+
+  return 0
+}
+
+###################  Private functions below ##################################
+
+# _recursive_rm_record
+# remove all records from the record set
+#
+# _token=$1
+# _domain=$2
+# _zoneid=$3
+# _record_id=$4
+#
+# Returns 0 on success
+_recursive_rm_record() {
+  _token=$1
+  _domain=$2
+  _zoneid=$3
+  _record_id=$4
+
+  # Most likely to have problems will huaweicloud side if more than 50 attempts but still cannot fully remove the record set
+  # Maybe can be removed manually in the dashboard
+  _retry_cnt=50
+
+  # Remove all records
+  # Therotically HuaweiCloud does not allow more than one record set
+  # But remove them recurringly to increase robusty
+
+  while [ "${_record_id}" != "0" ] && [ "${_retry_cnt}" != "0" ]; do
+    _debug "Removing Record"
+    _retry_cnt=$((_retry_cnt - 1))
+    _rm_record "${_token}" "${_zoneid}" "${_record_id}"
+    _record_id="$(_get_recordset_id "${_token}" "${_domain}" "${_zoneid}")"
+    _debug2 "Checking record exists: record_id=${_record_id}"
+  done
+
+  # Check if retry count is reached
+  if [ "${_retry_cnt}" = "0" ]; then
+    _debug "Failed to remove record after 50 attempts, please try removing it manually in the dashboard"
+    return 1
+  fi
+
+  return 0
+}
+
+# _get_zoneid
+#
+# _token=$1
+# _domain_string=$2
+#
+# printf "%s" "${_zoneid}"
+_get_zoneid() {
+  _token=$1
+  _domain_string=$2
+  export _H1="X-Auth-Token: ${_token}"
+
+  i=1
+  while true; do
+    h=$(printf "%s" "${_domain_string}" | cut -d . -f "$i"-100)
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+    _debug "$h"
+    response=$(_get "${dns_api}/v2/zones?name=${h}")
+    _debug2 "$response"
+    if _contains "${response}" '"id"'; then
+      zoneidlist=$(echo "${response}" | _egrep_o "\"id\": *\"[^\"]*\"" | cut -d : -f 2 | tr -d \" | tr -d " ")
+      zonenamelist=$(echo "${response}" | _egrep_o "\"name\": *\"[^\"]*\"" | cut -d : -f 2 | tr -d \" | tr -d " ")
+      _debug2 "Returned Zone ID(s):" "${zoneidlist}"
+      _debug2 "Returned Zone Name(s):" "${zonenamelist}"
+      zoneidnum=0
+      zoneidcount=$(echo "${zoneidlist}" | grep -c '^')
+      _debug "Returned Zone ID(s) Count:" "${zoneidcount}"
+      while [ "${zoneidnum}" -lt "${zoneidcount}" ]; do
+        zoneidnum=$(_math "$zoneidnum" + 1)
+        _zoneid=$(echo "${zoneidlist}" | sed -n "${zoneidnum}p")
+        zonename=$(echo "${zonenamelist}" | sed -n "${zoneidnum}p")
+        _debug "Check Zone Name" "${zonename}"
+        if [ "${zonename}" = "${h}." ]; then
+          _debug "Get Zone ID Success."
+          _debug "ZoneID:" "${_zoneid}"
+          printf "%s" "${_zoneid}"
+          return 0
+        fi
+      done
+    fi
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+_get_recordset_id() {
+  _token=$1
+  _domain=$2
+  _zoneid=$3
+  export _H1="X-Auth-Token: ${_token}"
+
+  response=$(_get "${dns_api}/v2/zones/${_zoneid}/recordsets?name=${_domain}")
+  if _contains "${response}" '"id"'; then
+    _id="$(echo "${response}" | _egrep_o "\"id\": *\"[^\"]*\"" | cut -d : -f 2 | tr -d \" | tr -d " ")"
+    printf "%s" "${_id}"
+    return 0
+  fi
+  printf "%s" "0"
+  return 1
+}
+
+_add_record() {
+  _token=$1
+  _domain=$2
+  _txtvalue=$3
+
+  # Get Existing Records
+  export _H1="X-Auth-Token: ${_token}"
+  response=$(_get "${dns_api}/v2/zones/${zoneid}/recordsets?name=${_domain}")
+
+  _debug2 "${response}"
+  _exist_record=$(echo "${response}" | _egrep_o '"records":[^]]*' | sed 's/\"records\"\:\[//g')
+  _debug "${_exist_record}"
+
+  # Check if record exist
+  # Generate body data
+  if [ -z "${_exist_record}" ]; then
+    _post_body="{
+      \"name\": \"${_domain}.\",
+      \"description\": \"ACME Challenge\",
+      \"type\": \"TXT\",
+      \"ttl\": 1,
+      \"records\": [
+        \"\\\"${_txtvalue}\\\"\"
+      ]
+    }"
+  else
+    _post_body="{
+      \"name\": \"${_domain}.\",
+      \"description\": \"ACME Challenge\",
+      \"type\": \"TXT\",
+      \"ttl\": 1,
+      \"records\": [
+        ${_exist_record},\"\\\"${_txtvalue}\\\"\"
+      ]
+    }"
+  fi
+
+  _record_id="$(_get_recordset_id "${_token}" "${_domain}" "${zoneid}")"
+  _debug "Record Set ID is:" "${_record_id}"
+
+  # Add brand new records with all old and new records
+  export _H2="Content-Type: application/json"
+  export _H1="X-Auth-Token: ${_token}"
+
+  _debug2 "${_post_body}"
+  if [ -z "${_exist_record}" ]; then
+    _post "${_post_body}" "${dns_api}/v2/zones/${zoneid}/recordsets" >/dev/null
+  else
+    _post "${_post_body}" "${dns_api}/v2/zones/${zoneid}/recordsets/${_record_id}" false "PUT" >/dev/null
+  fi
+  _code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\\r\\n")"
+  if [ "$_code" != "202" ]; then
+    _err "dns_huaweicloud: http code ${_code}"
+    return 1
+  fi
+  return 0
+}
+
+# _rm_record $token $zoneid $recordid
+# assume ${dns_api} exist
+# no output
+# return 0
+_rm_record() {
+  _token=$1
+  _zone_id=$2
+  _record_id=$3
+
+  export _H2="Content-Type: application/json"
+  export _H1="X-Auth-Token: ${_token}"
+
+  _post "" "${dns_api}/v2/zones/${_zone_id}/recordsets/${_record_id}" false "DELETE" >/dev/null
+  return $?
+}
+
+_get_token() {
+  _username=$1
+  _password=$2
+  _domain_name=$3
+
+  _debug "Getting Token"
+  body="{
+    \"auth\": {
+      \"identity\": {
+        \"methods\": [
+          \"password\"
+        ],
+        \"password\": {
+          \"user\": {
+            \"name\": \"${_username}\",
+            \"password\": \"${_password}\",
+            \"domain\": {
+              \"name\": \"${_domain_name}\"
+            }
+          }
+        }
+      },
+      \"scope\": {
+        \"project\": {
+          \"name\": \"ap-southeast-1\"
+        }
+      }
+    }
+  }"
+  export _H1="Content-Type: application/json;charset=utf8"
+  _post "${body}" "${iam_api}/v3/auth/tokens" >/dev/null
+  _code=$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\\r\\n")
+  _token=$(grep "^X-Subject-Token" "$HTTP_HEADER" | cut -d " " -f 2-)
+  _secure_debug "${_code}"
+  printf "%s" "${_token}"
+  return 0
+}

dnsapi/dns_infoblox.sh

@@ -9,7 +9,6 @@ dns_infoblox_add() {
   ## Nothing to see here, just some housekeeping
   fulldomain=$1
   txtvalue=$2
-  baseurlnObject="https://$Infoblox_Server/wapi/v2.2.2/record:txt?name=$fulldomain&text=$txtvalue&view=$Infoblox_View"
 
   _info "Using Infoblox API"
   _debug fulldomain "$fulldomain"
@@ -19,12 +18,13 @@ dns_infoblox_add() {
   if [ -z "$Infoblox_Creds" ] || [ -z "$Infoblox_Server" ]; then
     Infoblox_Creds=""
     Infoblox_Server=""
-    _err "You didn't specify the credentials, server or infoblox view yet (Infoblox_Creds, Infoblox_Server and Infoblox_View)."
-    _err "Please set them via EXPORT ([username:password], [ip or hostname]) and try again."
+    _err "You didn't specify the Infoblox credentials or server (Infoblox_Creds; Infoblox_Server)."
+    _err "Please set them via EXPORT Infoblox_Creds=username:password or EXPORT Infoblox_server=ip/hostname and try again."
     return 1
   fi
 
   if [ -z "$Infoblox_View" ]; then
+    _info "No Infoblox_View set, using fallback value 'default'"
     Infoblox_View="default"
   fi
 
@@ -33,6 +33,9 @@ dns_infoblox_add() {
   _saveaccountconf Infoblox_Server "$Infoblox_Server"
   _saveaccountconf Infoblox_View "$Infoblox_View"
 
+  ## URLencode Infoblox View to deal with e.g. spaces
+  Infoblox_ViewEncoded=$(printf "%b" "$Infoblox_View" | _url_encode)
+
   ## Base64 encode the credentials
   Infoblox_CredsEncoded=$(printf "%b" "$Infoblox_Creds" | _base64)
 
@@ -40,11 +43,14 @@ dns_infoblox_add() {
   export _H1="Accept-Language:en-US"
   export _H2="Authorization: Basic $Infoblox_CredsEncoded"
 
+  ## Construct the request URL
+  baseurlnObject="https://$Infoblox_Server/wapi/v2.2.2/record:txt?name=$fulldomain&text=$txtvalue&view=${Infoblox_ViewEncoded}"
+
   ## Add the challenge record to the Infoblox grid member
   result="$(_post "" "$baseurlnObject" "" "POST")"
 
   ## Let's see if we get something intelligible back from the unit
-  if [ "$(echo "$result" | _egrep_o "record:txt/.*:.*/$Infoblox_View")" ]; then
+  if [ "$(echo "$result" | _egrep_o "record:txt/.*:.*/${Infoblox_ViewEncoded}")" ]; then
     _info "Successfully created the txt record"
     return 0
   else
@@ -65,6 +71,9 @@ dns_infoblox_rm() {
   _debug fulldomain "$fulldomain"
   _debug txtvalue "$txtvalue"
 
+  ## URLencode Infoblox View to deal with e.g. spaces
+  Infoblox_ViewEncoded=$(printf "%b" "$Infoblox_View" | _url_encode)
+
   ## Base64 encode the credentials
   Infoblox_CredsEncoded="$(printf "%b" "$Infoblox_Creds" | _base64)"
 
@@ -73,18 +82,18 @@ dns_infoblox_rm() {
   export _H2="Authorization: Basic $Infoblox_CredsEncoded"
 
   ## Does the record exist?  Let's check.
-  baseurlnObject="https://$Infoblox_Server/wapi/v2.2.2/record:txt?name=$fulldomain&text=$txtvalue&view=$Infoblox_View&_return_type=xml-pretty"
+  baseurlnObject="https://$Infoblox_Server/wapi/v2.2.2/record:txt?name=$fulldomain&text=$txtvalue&view=${Infoblox_ViewEncoded}&_return_type=xml-pretty"
   result="$(_get "$baseurlnObject")"
 
   ## Let's see if we get something intelligible back from the grid
-  if [ "$(echo "$result" | _egrep_o "record:txt/.*:.*/$Infoblox_View")" ]; then
+  if [ "$(echo "$result" | _egrep_o "record:txt/.*:.*/${Infoblox_ViewEncoded}")" ]; then
     ## Extract the object reference
-    objRef="$(printf "%b" "$result" | _egrep_o "record:txt/.*:.*/$Infoblox_View")"
+    objRef="$(printf "%b" "$result" | _egrep_o "record:txt/.*:.*/${Infoblox_ViewEncoded}")"
     objRmUrl="https://$Infoblox_Server/wapi/v2.2.2/$objRef"
     ## Delete them! All the stale records!
     rmResult="$(_post "" "$objRmUrl" "" "DELETE")"
     ## Let's see if that worked
-    if [ "$(echo "$rmResult" | _egrep_o "record:txt/.*:.*/$Infoblox_View")" ]; then
+    if [ "$(echo "$rmResult" | _egrep_o "record:txt/.*:.*/${Infoblox_ViewEncoded}")" ]; then
       _info "Successfully deleted $objRef"
       return 0
     else

dnsapi/dns_infomaniak.sh

@@ -0,0 +1,199 @@
+#!/usr/bin/env sh
+
+###############################################################################
+# Infomaniak API integration
+#
+# To use this API you need visit the API dashboard of your account
+# once logged into https://manager.infomaniak.com add /api/dashboard to the URL
+#
+# Please report bugs to
+# https://github.com/acmesh-official/acme.sh/issues/3188
+#
+# Note: the URL looks like this:
+# https://manager.infomaniak.com/v3/<account_id>/api/dashboard
+# Then generate a token with the scope Domain
+# this is given as an environment variable INFOMANIAK_API_TOKEN
+###############################################################################
+
+# base variables
+
+DEFAULT_INFOMANIAK_API_URL="https://api.infomaniak.com"
+DEFAULT_INFOMANIAK_TTL=300
+
+########  Public functions #####################
+
+#Usage: dns_infomaniak_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_infomaniak_add() {
+
+  INFOMANIAK_API_TOKEN="${INFOMANIAK_API_TOKEN:-$(_readaccountconf_mutable INFOMANIAK_API_TOKEN)}"
+  INFOMANIAK_API_URL="${INFOMANIAK_API_URL:-$(_readaccountconf_mutable INFOMANIAK_API_URL)}"
+  INFOMANIAK_TTL="${INFOMANIAK_TTL:-$(_readaccountconf_mutable INFOMANIAK_TTL)}"
+
+  if [ -z "$INFOMANIAK_API_TOKEN" ]; then
+    INFOMANIAK_API_TOKEN=""
+    _err "Please provide a valid Infomaniak API token in variable INFOMANIAK_API_TOKEN"
+    return 1
+  fi
+
+  if [ -z "$INFOMANIAK_API_URL" ]; then
+    INFOMANIAK_API_URL="$DEFAULT_INFOMANIAK_API_URL"
+  fi
+
+  if [ -z "$INFOMANIAK_TTL" ]; then
+    INFOMANIAK_TTL="$DEFAULT_INFOMANIAK_TTL"
+  fi
+
+  #save the token to the account conf file.
+  _saveaccountconf_mutable INFOMANIAK_API_TOKEN "$INFOMANIAK_API_TOKEN"
+
+  if [ "$INFOMANIAK_API_URL" != "$DEFAULT_INFOMANIAK_API_URL" ]; then
+    _saveaccountconf_mutable INFOMANIAK_API_URL "$INFOMANIAK_API_URL"
+  fi
+
+  if [ "$INFOMANIAK_TTL" != "$DEFAULT_INFOMANIAK_TTL" ]; then
+    _saveaccountconf_mutable INFOMANIAK_TTL "$INFOMANIAK_TTL"
+  fi
+
+  export _H1="Authorization: Bearer $INFOMANIAK_API_TOKEN"
+  export _H2="Content-Type: application/json"
+
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _info "Infomaniak DNS API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  fqdn=${fulldomain#_acme-challenge.}
+
+  # guess which base domain to add record to
+  zone_and_id=$(_find_zone "$fqdn")
+  if [ -z "$zone_and_id" ]; then
+    _err "cannot find zone to modify"
+    return 1
+  fi
+  zone=${zone_and_id% *}
+  domain_id=${zone_and_id#* }
+
+  # extract first part of domain
+  key=${fulldomain%."$zone"}
+
+  _debug "zone:$zone id:$domain_id key:$key"
+
+  # payload
+  data="{\"type\": \"TXT\", \"source\": \"$key\", \"target\": \"$txtvalue\", \"ttl\": $INFOMANIAK_TTL}"
+
+  # API call
+  response=$(_post "$data" "${INFOMANIAK_API_URL}/1/domain/$domain_id/dns/record")
+  if [ -n "$response" ] && echo "$response" | _contains '"result":"success"'; then
+    _info "Record added"
+    _debug "Response: $response"
+    return 0
+  fi
+  _err "could not create record"
+  _debug "Response: $response"
+  return 1
+}
+
+#Usage: fulldomain txtvalue
+#Remove the txt record after validation.
+dns_infomaniak_rm() {
+
+  INFOMANIAK_API_TOKEN="${INFOMANIAK_API_TOKEN:-$(_readaccountconf_mutable INFOMANIAK_API_TOKEN)}"
+  INFOMANIAK_API_URL="${INFOMANIAK_API_URL:-$(_readaccountconf_mutable INFOMANIAK_API_URL)}"
+  INFOMANIAK_TTL="${INFOMANIAK_TTL:-$(_readaccountconf_mutable INFOMANIAK_TTL)}"
+
+  if [ -z "$INFOMANIAK_API_TOKEN" ]; then
+    INFOMANIAK_API_TOKEN=""
+    _err "Please provide a valid Infomaniak API token in variable INFOMANIAK_API_TOKEN"
+    return 1
+  fi
+
+  if [ -z "$INFOMANIAK_API_URL" ]; then
+    INFOMANIAK_API_URL="$DEFAULT_INFOMANIAK_API_URL"
+  fi
+
+  if [ -z "$INFOMANIAK_TTL" ]; then
+    INFOMANIAK_TTL="$DEFAULT_INFOMANIAK_TTL"
+  fi
+
+  #save the token to the account conf file.
+  _saveaccountconf_mutable INFOMANIAK_API_TOKEN "$INFOMANIAK_API_TOKEN"
+
+  if [ "$INFOMANIAK_API_URL" != "$DEFAULT_INFOMANIAK_API_URL" ]; then
+    _saveaccountconf_mutable INFOMANIAK_API_URL "$INFOMANIAK_API_URL"
+  fi
+
+  if [ "$INFOMANIAK_TTL" != "$DEFAULT_INFOMANIAK_TTL" ]; then
+    _saveaccountconf_mutable INFOMANIAK_TTL "$INFOMANIAK_TTL"
+  fi
+
+  export _H1="Authorization: Bearer $INFOMANIAK_API_TOKEN"
+  export _H2="ContentType: application/json"
+
+  fulldomain=$1
+  txtvalue=$2
+  _info "Infomaniak DNS API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  fqdn=${fulldomain#_acme-challenge.}
+
+  # guess which base domain to add record to
+  zone_and_id=$(_find_zone "$fqdn")
+  if [ -z "$zone_and_id" ]; then
+    _err "cannot find zone to modify"
+    return 1
+  fi
+  zone=${zone_and_id% *}
+  domain_id=${zone_and_id#* }
+
+  # extract first part of domain
+  key=${fulldomain%."$zone"}
+
+  _debug "zone:$zone id:$domain_id key:$key"
+
+  # find previous record
+  # shellcheck disable=SC1004
+  record_id=$(_get "${INFOMANIAK_API_URL}/1/domain/$domain_id/dns/record" | sed 's/.*"data":\[\(.*\)\]}/\1/; s/},{/}\
+{/g' | sed -n 's/.*"id":"*\([0-9]*\)"*.*"source_idn":"'"$fulldomain"'".*"target_idn":"'"$txtvalue"'".*/\1/p')
+  if [ -z "$record_id" ]; then
+    _err "could not find record to delete"
+    return 1
+  fi
+  _debug "record_id: $record_id"
+
+  # API call
+  response=$(_post "" "${INFOMANIAK_API_URL}/1/domain/$domain_id/dns/record/$record_id" "" DELETE)
+  if [ -n "$response" ] && echo "$response" | _contains '"result":"success"'; then
+    _info "Record deleted"
+    return 0
+  fi
+  _err "could not delete record"
+  return 1
+}
+
+####################  Private functions below ##################################
+
+_get_domain_id() {
+  domain="$1"
+
+  # shellcheck disable=SC1004
+  _get "${INFOMANIAK_API_URL}/1/product?service_name=domain&customer_name=$domain" | sed 's/.*"data":\[{\(.*\)}\]}/\1/; s/,/\
+/g' | sed -n 's/^"id":\(.*\)/\1/p'
+}
+
+_find_zone() {
+  zone="$1"
+
+  # find domain in list, removing . parts sequentialy
+  while _contains "$zone" '\.'; do
+    _debug "testing $zone"
+    id=$(_get_domain_id "$zone")
+    if [ -n "$id" ]; then
+      echo "$zone $id"
+      return
+    fi
+    zone=${zone#*.}
+  done
+}

dnsapi/dns_ionos.sh

@@ -0,0 +1,171 @@
+#!/usr/bin/env sh
+
+# Supports IONOS DNS API v1.0.1
+#
+# Usage:
+#   Export IONOS_PREFIX and IONOS_SECRET before calling acme.sh:
+#
+#   $ export IONOS_PREFIX="..."
+#   $ export IONOS_SECRET="..."
+#
+#   $ acme.sh --issue --dns dns_ionos ...
+
+IONOS_API="https://api.hosting.ionos.com/dns"
+IONOS_ROUTE_ZONES="/v1/zones"
+
+IONOS_TXT_TTL=60 # minimum accepted by API
+IONOS_TXT_PRIO=10
+
+dns_ionos_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  if ! _ionos_init; then
+    return 1
+  fi
+
+  _body="[{\"name\":\"$_sub_domain.$_domain\",\"type\":\"TXT\",\"content\":\"$txtvalue\",\"ttl\":$IONOS_TXT_TTL,\"prio\":$IONOS_TXT_PRIO,\"disabled\":false}]"
+
+  if _ionos_rest POST "$IONOS_ROUTE_ZONES/$_zone_id/records" "$_body" && [ "$_code" = "201" ]; then
+    _info "TXT record has been created successfully."
+    return 0
+  fi
+
+  return 1
+}
+
+dns_ionos_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  if ! _ionos_init; then
+    return 1
+  fi
+
+  if ! _ionos_get_record "$fulldomain" "$_zone_id" "$txtvalue"; then
+    _err "Could not find _acme-challenge TXT record."
+    return 1
+  fi
+
+  if _ionos_rest DELETE "$IONOS_ROUTE_ZONES/$_zone_id/records/$_record_id" && [ "$_code" = "200" ]; then
+    _info "TXT record has been deleted successfully."
+    return 0
+  fi
+
+  return 1
+}
+
+_ionos_init() {
+  IONOS_PREFIX="${IONOS_PREFIX:-$(_readaccountconf_mutable IONOS_PREFIX)}"
+  IONOS_SECRET="${IONOS_SECRET:-$(_readaccountconf_mutable IONOS_SECRET)}"
+
+  if [ -z "$IONOS_PREFIX" ] || [ -z "$IONOS_SECRET" ]; then
+    _err "You didn't specify an IONOS api prefix and secret yet."
+    _err "Read https://beta.developer.hosting.ionos.de/docs/getstarted to learn how to get a prefix and secret."
+    _err ""
+    _err "Then set them before calling acme.sh:"
+    _err "\$ export IONOS_PREFIX=\"...\""
+    _err "\$ export IONOS_SECRET=\"...\""
+    _err "\$ acme.sh --issue -d ... --dns dns_ionos"
+    return 1
+  fi
+
+  _saveaccountconf_mutable IONOS_PREFIX "$IONOS_PREFIX"
+  _saveaccountconf_mutable IONOS_SECRET "$IONOS_SECRET"
+
+  if ! _get_root "$fulldomain"; then
+    _err "Cannot find this domain in your IONOS account."
+    return 1
+  fi
+}
+
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  if _ionos_rest GET "$IONOS_ROUTE_ZONES"; then
+    _response="$(echo "$_response" | tr -d "\n")"
+
+    while true; do
+      h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+      if [ -z "$h" ]; then
+        return 1
+      fi
+
+      _zone="$(echo "$_response" | _egrep_o "\"name\":\"$h\".*\}")"
+      if [ "$_zone" ]; then
+        _zone_id=$(printf "%s\n" "$_zone" | _egrep_o "\"id\":\"[a-fA-F0-9\-]*\"" | _head_n 1 | cut -d : -f 2 | tr -d '\"')
+        if [ "$_zone_id" ]; then
+          _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+          _domain=$h
+
+          return 0
+        fi
+
+        return 1
+      fi
+
+      p=$i
+      i=$(_math "$i" + 1)
+    done
+  fi
+
+  return 1
+}
+
+_ionos_get_record() {
+  fulldomain=$1
+  zone_id=$2
+  txtrecord=$3
+
+  if _ionos_rest GET "$IONOS_ROUTE_ZONES/$zone_id?recordName=$fulldomain&recordType=TXT"; then
+    _response="$(echo "$_response" | tr -d "\n")"
+
+    _record="$(echo "$_response" | _egrep_o "\"name\":\"$fulldomain\"[^\}]*\"type\":\"TXT\"[^\}]*\"content\":\"\\\\\"$txtrecord\\\\\"\".*\}")"
+    if [ "$_record" ]; then
+      _record_id=$(printf "%s\n" "$_record" | _egrep_o "\"id\":\"[a-fA-F0-9\-]*\"" | _head_n 1 | cut -d : -f 2 | tr -d '\"')
+
+      return 0
+    fi
+  fi
+
+  return 1
+}
+
+_ionos_rest() {
+  method="$1"
+  route="$2"
+  data="$3"
+
+  IONOS_API_KEY="$(printf "%s.%s" "$IONOS_PREFIX" "$IONOS_SECRET")"
+
+  export _H1="X-API-Key: $IONOS_API_KEY"
+
+  # clear headers
+  : >"$HTTP_HEADER"
+
+  if [ "$method" != "GET" ]; then
+    export _H2="Accept: application/json"
+    export _H3="Content-Type: application/json"
+
+    _response="$(_post "$data" "$IONOS_API$route" "" "$method" "application/json")"
+  else
+    export _H2="Accept: */*"
+    export _H3=
+
+    _response="$(_get "$IONOS_API$route")"
+  fi
+
+  _code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\\r\\n")"
+
+  if [ "$?" != "0" ]; then
+    _err "Error $route: $_response"
+    return 1
+  fi
+
+  _debug2 "_response" "$_response"
+  _debug2 "_code" "$_code"
+
+  return 0
+}

dnsapi/dns_ipv64.sh

@@ -0,0 +1,157 @@
+#!/usr/bin/env sh
+
+#Created by Roman Lumetsberger, to use ipv64.net's API to add/remove text records
+#2022/11/29
+
+# Pass credentials before "acme.sh --issue --dns dns_ipv64 ..."
+# --
+# export IPv64_Token="aaaaaaaaaaaaaaaaaaaaaaaaaa"
+# --
+#
+
+IPv64_API="https://ipv64.net/api"
+
+########  Public functions ######################
+
+#Usage: dns_ipv64_add _acme-challenge.domain.ipv64.net "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_ipv64_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  IPv64_Token="${IPv64_Token:-$(_readaccountconf_mutable IPv64_Token)}"
+  if [ -z "$IPv64_Token" ]; then
+    _err "You must export variable: IPv64_Token"
+    _err "The API Key for your IPv64 account is necessary."
+    _err "You can look it up in your IPv64 account."
+    return 1
+  fi
+
+  # Now save the credentials.
+  _saveaccountconf_mutable IPv64_Token "$IPv64_Token"
+
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain" "$fulldomain"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  # convert to lower case
+  _domain="$(echo "$_domain" | _lower_case)"
+  _sub_domain="$(echo "$_sub_domain" | _lower_case)"
+  # Now add the TXT record
+  _info "Trying to add TXT record"
+  if _ipv64_rest "POST" "add_record=$_domain&praefix=$_sub_domain&type=TXT&content=$txtvalue"; then
+    _info "TXT record has been successfully added."
+    return 0
+  else
+    _err "Errors happened during adding the TXT record, response=$_response"
+    return 1
+  fi
+
+}
+
+#Usage: fulldomain txtvalue
+#Usage: dns_ipv64_rm _acme-challenge.domain.ipv64.net "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+#Remove the txt record after validation.
+dns_ipv64_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  IPv64_Token="${IPv64_Token:-$(_readaccountconf_mutable IPv64_Token)}"
+  if [ -z "$IPv64_Token" ]; then
+    _err "You must export variable: IPv64_Token"
+    _err "The API Key for your IPv64 account is necessary."
+    _err "You can look it up in your IPv64 account."
+    return 1
+  fi
+
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain" "$fulldomain"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  # convert to lower case
+  _domain="$(echo "$_domain" | _lower_case)"
+  _sub_domain="$(echo "$_sub_domain" | _lower_case)"
+  # Now delete the TXT record
+  _info "Trying to delete TXT record"
+  if _ipv64_rest "DELETE" "del_record=$_domain&praefix=$_sub_domain&type=TXT&content=$txtvalue"; then
+    _info "TXT record has been successfully deleted."
+    return 0
+  else
+    _err "Errors happened during deleting the TXT record, response=$_response"
+    return 1
+  fi
+
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+_get_root() {
+  domain="$1"
+  i=1
+  p=1
+
+  _ipv64_get "get_domains"
+  domain_data=$_response
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    #if _contains "$domain_data" "\""$h"\"\:"; then
+    if _contains "$domain_data" "\"""$h""\"\:"; then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      _domain="$h"
+      return 0
+    fi
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+#send get request to api
+# $1 has to set the api-function
+_ipv64_get() {
+  url="$IPv64_API?$1"
+  export _H1="Authorization: Bearer $IPv64_Token"
+
+  _response=$(_get "$url")
+  _response="$(echo "$_response" | _normalizeJson)"
+
+  if _contains "$_response" "429 Too Many Requests"; then
+    _info "API throttled, sleeping to reset the limit"
+    _sleep 10
+    _response=$(_get "$url")
+    _response="$(echo "$_response" | _normalizeJson)"
+  fi
+}
+
+_ipv64_rest() {
+  url="$IPv64_API"
+  export _H1="Authorization: Bearer $IPv64_Token"
+  export _H2="Content-Type: application/x-www-form-urlencoded"
+  _response=$(_post "$2" "$url" "" "$1")
+
+  if _contains "$_response" "429 Too Many Requests"; then
+    _info "API throttled, sleeping to reset the limit"
+    _sleep 10
+    _response=$(_post "$2" "$url" "" "$1")
+  fi
+
+  if ! _contains "$_response" "\"info\":\"success\""; then
+    return 1
+  fi
+  _debug2 response "$_response"
+  return 0
+}

dnsapi/dns_ispconfig.sh

@@ -32,7 +32,11 @@ dns_ispconfig_rm() {
 ####################  Private functions below ##################################
 
 _ISPC_credentials() {
-  if [ -z "${ISPC_User}" ] || [ -z "$ISPC_Password" ] || [ -z "${ISPC_Api}" ] || [ -z "${ISPC_Api_Insecure}" ]; then
+  ISPC_User="${ISPC_User:-$(_readaccountconf_mutable ISPC_User)}"
+  ISPC_Password="${ISPC_Password:-$(_readaccountconf_mutable ISPC_Password)}"
+  ISPC_Api="${ISPC_Api:-$(_readaccountconf_mutable ISPC_Api)}"
+  ISPC_Api_Insecure="${ISPC_Api_Insecure:-$(_readaccountconf_mutable ISPC_Api_Insecure)}"
+  if [ -z "${ISPC_User}" ] || [ -z "${ISPC_Password}" ] || [ -z "${ISPC_Api}" ] || [ -z "${ISPC_Api_Insecure}" ]; then
     ISPC_User=""
     ISPC_Password=""
     ISPC_Api=""
@@ -40,10 +44,10 @@ _ISPC_credentials() {
     _err "You haven't specified the ISPConfig Login data, URL and whether you want check the ISPC SSL cert. Please try again."
     return 1
   else
-    _saveaccountconf ISPC_User "${ISPC_User}"
-    _saveaccountconf ISPC_Password "${ISPC_Password}"
-    _saveaccountconf ISPC_Api "${ISPC_Api}"
-    _saveaccountconf ISPC_Api_Insecure "${ISPC_Api_Insecure}"
+    _saveaccountconf_mutable ISPC_User "${ISPC_User}"
+    _saveaccountconf_mutable ISPC_Password "${ISPC_Password}"
+    _saveaccountconf_mutable ISPC_Api "${ISPC_Api}"
+    _saveaccountconf_mutable ISPC_Api_Insecure "${ISPC_Api_Insecure}"
     # Set whether curl should use secure or insecure mode
     export HTTPS_INSECURE="${ISPC_Api_Insecure}"
   fi
@@ -75,7 +79,7 @@ _ISPC_getZoneInfo() {
     # suffix . needed for zone -> domain.tld.
     curData="{\"session_id\":\"${sessionID}\",\"primary_id\":{\"origin\":\"${curZone}.\"}}"
     curResult="$(_post "${curData}" "${ISPC_Api}?dns_zone_get")"
-    _debug "Calling _ISPC_getZoneInfo: '${curData}' '${ISPC_Api}?login'"
+    _debug "Calling _ISPC_getZoneInfo: '${curData}' '${ISPC_Api}?dns_zone_get'"
     _debug "Result of _ISPC_getZoneInfo: '$curResult'"
     if _contains "${curResult}" '"id":"'; then
       zoneFound=true
@@ -110,18 +114,32 @@ _ISPC_getZoneInfo() {
       ;;
     *) _info "Retrieved Zone ID" ;;
     esac
-    client_id=$(echo "${curResult}" | _egrep_o "sys_userid.*" | cut -d ':' -f 2 | cut -d '"' -f 2)
-    _debug "Client ID: '${client_id}'"
-    case "${client_id}" in
+    sys_userid=$(echo "${curResult}" | _egrep_o "sys_userid.*" | cut -d ':' -f 2 | cut -d '"' -f 2)
+    _debug "SYS User ID: '${sys_userid}'"
+    case "${sys_userid}" in
     '' | *[!0-9]*)
-      _err "Client ID is not numeric."
+      _err "SYS User ID is not numeric."
       return 1
       ;;
-    *) _info "Retrieved Client ID." ;;
+    *) _info "Retrieved SYS User ID." ;;
     esac
     zoneFound=""
     zoneEnd=""
   fi
+  # Need to get client_id as it is different from sys_userid
+  curData="{\"session_id\":\"${sessionID}\",\"sys_userid\":\"${sys_userid}\"}"
+  curResult="$(_post "${curData}" "${ISPC_Api}?client_get_id")"
+  _debug "Calling _ISPC_ClientGetID: '${curData}' '${ISPC_Api}?client_get_id'"
+  _debug "Result of _ISPC_ClientGetID: '$curResult'"
+  client_id=$(echo "${curResult}" | _egrep_o "response.*" | cut -d ':' -f 2 | cut -d '"' -f 2 | tr -d '{}')
+  _debug "Client ID: '${client_id}'"
+  case "${client_id}" in
+  '' | *[!0-9]*)
+    _err "Client ID is not numeric."
+    return 1
+    ;;
+  *) _info "Retrieved Client ID." ;;
+  esac
 }
 
 _ISPC_addTxt() {

dnsapi/dns_kas.sh

@@ -5,51 +5,81 @@
 # Environment variables:
 #
 #  - $KAS_Login (Kasserver API login name)
-#  - $KAS_Authtype (Kasserver API auth type. Default: sha1)
+#  - $KAS_Authtype (Kasserver API auth type. Default: plain)
 #  - $KAS_Authdata (Kasserver API auth data.)
 #
-# Author: Martin Kammerlander, Phlegx Systems OG <[email protected]>
-# Updated by: Marc-Oliver Lange <[email protected]>
-# Credits: Inspired by dns_he.sh. Thanks a lot man!
-# Git repo: https://github.com/phlegx/acme.sh
-# TODO: Better Error handling
+# Last update: squared GmbH <[email protected]>
+# Credits:
+# - dns_he.sh. Thanks a lot man!
+# - Martin Kammerlander, Phlegx Systems OG <[email protected]>
+# - Marc-Oliver Lange <[email protected]>
+# - https://github.com/o1oo11oo/kasapi.sh
 ########################################################################
-KAS_Api="https://kasapi.kasserver.com/dokumentation/formular.php"
+KAS_Api_GET="$(_get "https://kasapi.kasserver.com/soap/wsdl/KasApi.wsdl")"
+KAS_Api="$(echo "$KAS_Api_GET" | tr -d ' ' | grep -i "<soap:addresslocation=" | sed "s/='/\n/g" | grep -i "http" | sed "s/'\/>//g")"
+_info "[KAS] -> API URL $KAS_Api"
+
+KAS_Auth_GET="$(_get "https://kasapi.kasserver.com/soap/wsdl/KasAuth.wsdl")"
+KAS_Auth="$(echo "$KAS_Auth_GET" | tr -d ' ' | grep -i "<soap:addresslocation=" | sed "s/='/\n/g" | grep -i "http" | sed "s/'\/>//g")"
+_info "[KAS] -> AUTH URL $KAS_Auth"
+
+KAS_default_ratelimit=5 # TODO - Every response delivers a ratelimit (seconds) where KASAPI is blocking a request.
+
 ########  Public functions  #####################
 dns_kas_add() {
   _fulldomain=$1
   _txtvalue=$2
-  _info "Using DNS-01 All-inkl/Kasserver hook"
-  _info "Adding $_fulldomain DNS TXT entry on All-inkl/Kasserver"
-  _info "Check and Save Props"
+
+  _info "[KAS] -> Using DNS-01 All-inkl/Kasserver hook"
+  _info "[KAS] -> Check and Save Props"
   _check_and_save
-  _info "Checking Zone and Record_Name"
+
+  _info "[KAS] -> Adding $_fulldomain DNS TXT entry on all-inkl.com/Kasserver"
+  _info "[KAS] -> Retriving Credential Token"
+  _get_credential_token
+
+  _info "[KAS] -> Checking Zone and Record_Name"
   _get_zone_and_record_name "$_fulldomain"
-  _info "Getting Record ID"
+
+  _info "[KAS] -> Checking for existing Record entries"
   _get_record_id
 
-  _info "Creating TXT DNS record"
-  params="?kas_login=$KAS_Login"
-  params="$params&kas_auth_type=$KAS_Authtype"
-  params="$params&kas_auth_data=$KAS_Authdata"
-  params="$params&var1=record_name"
-  params="$params&wert1=$_record_name"
-  params="$params&var2=record_type"
-  params="$params&wert2=TXT"
-  params="$params&var3=record_data"
-  params="$params&wert3=$_txtvalue"
-  params="$params&var4=record_aux"
-  params="$params&wert4=0"
-  params="$params&kas_action=add_dns_settings"
-  params="$params&var5=zone_host"
-  params="$params&wert5=$_zone"
-  _debug2 "Wait for 10 seconds by default before calling KAS API."
-  _sleep 10
-  response="$(_get "$KAS_Api$params")"
-  _debug2 "response" "$response"
-
-  if ! _contains "$response" "TRUE"; then
-    _err "An unkown error occurred, please check manually."
+  # If there is a record_id, delete the entry
+  if [ -n "$_record_id" ]; then
+    _info "[KAS] -> Existing records found. Now deleting old entries"
+    for i in $_record_id; do
+      _delete_RecordByID "$i"
+    done
+  else
+    _info "[KAS] -> No record found."
+  fi
+
+  _info "[KAS] -> Creating TXT DNS record"
+  action="add_dns_settings"
+  kasReqParam="\"record_name\":\"$_record_name\""
+  kasReqParam="$kasReqParam,\"record_type\":\"TXT\""
+  kasReqParam="$kasReqParam,\"record_data\":\"$_txtvalue\""
+  kasReqParam="$kasReqParam,\"record_aux\":\"0\""
+  kasReqParam="$kasReqParam,\"zone_host\":\"$_zone\""
+  response="$(_callAPI "$action" "$kasReqParam")"
+  _debug2 "[KAS] -> Response" "$response"
+
+  if [ -z "$response" ]; then
+    _info "[KAS] -> Response was empty, please check manually."
+    return 1
+  elif _contains "$response" "<SOAP-ENV:Fault>"; then
+    faultstring="$(echo "$response" | tr -d '\n\r' | sed "s/<faultstring>/\n=> /g" | sed "s/<\/faultstring>/\n/g" | grep "=>" | sed "s/=> //g")"
+    case "${faultstring}" in
+    "record_already_exists")
+      _info "[KAS] -> The record already exists, which must not be a problem. Please check manually."
+      ;;
+    *)
+      _err "[KAS] -> An error =>$faultstring<= occurred, please check manually."
+      return 1
+      ;;
+    esac
+  elif ! _contains "$response" "<item><key xsi:type=\"xsd:string\">ReturnString</key><value xsi:type=\"xsd:string\">TRUE</value></item>"; then
+    _err "[KAS] -> An unknown error occurred, please check manually."
     return 1
   fi
   return 0
@@ -58,45 +88,62 @@ dns_kas_add() {
 dns_kas_rm() {
   _fulldomain=$1
   _txtvalue=$2
-  _info "Using DNS-01 All-inkl/Kasserver hook"
-  _info "Cleaning up after All-inkl/Kasserver hook"
-  _info "Removing $_fulldomain DNS TXT entry on All-inkl/Kasserver"
 
-  _info "Check and Save Props"
+  _info "[KAS] -> Using DNS-01 All-inkl/Kasserver hook"
+  _info "[KAS] -> Check and Save Props"
   _check_and_save
-  _info "Checking Zone and Record_Name"
+
+  _info "[KAS] -> Cleaning up after All-inkl/Kasserver hook"
+  _info "[KAS] -> Removing $_fulldomain DNS TXT entry on All-inkl/Kasserver"
+  _info "[KAS] -> Retriving Credential Token"
+  _get_credential_token
+
+  _info "[KAS] -> Checking Zone and Record_Name"
   _get_zone_and_record_name "$_fulldomain"
-  _info "Getting Record ID"
+
+  _info "[KAS] -> Getting Record ID"
   _get_record_id
 
+  _info "[KAS] -> Removing entries with ID: $_record_id"
   # If there is a record_id, delete the entry
   if [ -n "$_record_id" ]; then
-    params="?kas_login=$KAS_Login"
-    params="$params&kas_auth_type=$KAS_Authtype"
-    params="$params&kas_auth_data=$KAS_Authdata"
-    params="$params&kas_action=delete_dns_settings"
-
     for i in $_record_id; do
-      params2="$params&var1=record_id"
-      params2="$params2&wert1=$i"
-      _debug2 "Wait for 10 seconds by default before calling KAS API."
-      _sleep 10
-      response="$(_get "$KAS_Api$params2")"
-      _debug2 "response" "$response"
-      if ! _contains "$response" "TRUE"; then
-        _err "Either the txt record is not found or another error occurred, please check manually."
-        return 1
-      fi
+      _delete_RecordByID "$i"
     done
   else # Cannot delete or unkown error
-    _err "No record_id found that can be deleted. Please check manually."
-    return 1
+    _info "[KAS] -> No record_id found that can be deleted. Please check manually."
   fi
   return 0
 }
 
 ########################## PRIVATE FUNCTIONS ###########################
+# Delete Record ID
+_delete_RecordByID() {
+  recId=$1
+  action="delete_dns_settings"
+  kasReqParam="\"record_id\":\"$recId\""
+  response="$(_callAPI "$action" "$kasReqParam")"
+  _debug2 "[KAS] -> Response" "$response"
 
+  if [ -z "$response" ]; then
+    _info "[KAS] -> Response was empty, please check manually."
+    return 1
+  elif _contains "$response" "<SOAP-ENV:Fault>"; then
+    faultstring="$(echo "$response" | tr -d '\n\r' | sed "s/<faultstring>/\n=> /g" | sed "s/<\/faultstring>/\n/g" | grep "=>" | sed "s/=> //g")"
+    case "${faultstring}" in
+    "record_id_not_found")
+      _info "[KAS] -> The record was not found, which perhaps is not a problem. Please check manually."
+      ;;
+    *)
+      _err "[KAS] -> An error =>$faultstring<= occurred, please check manually."
+      return 1
+      ;;
+    esac
+  elif ! _contains "$response" "<item><key xsi:type=\"xsd:string\">ReturnString</key><value xsi:type=\"xsd:string\">TRUE</value></item>"; then
+    _err "[KAS] -> An unknown error occurred, please check manually."
+    return 1
+  fi
+}
 # Checks for the ENV variables and saves them
 _check_and_save() {
   KAS_Login="${KAS_Login:-$(_readaccountconf_mutable KAS_Login)}"
@@ -107,7 +154,7 @@ _check_and_save() {
     KAS_Login=
     KAS_Authtype=
     KAS_Authdata=
-    _err "No auth details provided. Please set user credentials using the \$KAS_Login, \$KAS_Authtype, and \$KAS_Authdata environment variables."
+    _err "[KAS] -> No auth details provided. Please set user credentials using the \$KAS_Login, \$KAS_Authtype, and \$KAS_Authdata environment variables."
     return 1
   fi
   _saveaccountconf_mutable KAS_Login "$KAS_Login"
@@ -119,50 +166,116 @@ _check_and_save() {
 # Gets back the base domain/zone and record name.
 # See: https://github.com/Neilpang/acme.sh/wiki/DNS-API-Dev-Guide
 _get_zone_and_record_name() {
-  params="?kas_login=$KAS_Login"
-  params="?kas_login=$KAS_Login"
-  params="$params&kas_auth_type=$KAS_Authtype"
-  params="$params&kas_auth_data=$KAS_Authdata"
-  params="$params&kas_action=get_domains"
-
-  _debug2 "Wait for 10 seconds by default before calling KAS API."
-  _sleep 10
-  response="$(_get "$KAS_Api$params")"
-  _debug2 "response" "$response"
-  _zonen="$(echo "$response" | tr -d "\n\r" | tr -d " " | tr '[]' '<>' | sed "s/=>Array/\n=> Array/g" | tr ' ' '\n' | grep "domain_name" | tr '<' '\n' | grep "domain_name" | sed "s/domain_name>=>//g")"
-  _domain="$1"
-  _temp_domain="$(echo "$1" | sed 's/\.$//')"
-  _rootzone="$_domain"
-  for i in $_zonen; do
-    l1=${#_rootzone}
+  action="get_domains"
+  response="$(_callAPI "$action")"
+  _debug2 "[KAS] -> Response" "$response"
+
+  if [ -z "$response" ]; then
+    _info "[KAS] -> Response was empty, please check manually."
+    return 1
+  elif _contains "$response" "<SOAP-ENV:Fault>"; then
+    faultstring="$(echo "$response" | tr -d '\n\r' | sed "s/<faultstring>/\n=> /g" | sed "s/<\/faultstring>/\n/g" | grep "=>" | sed "s/=> //g")"
+    _err "[KAS] -> Either no domains were found or another error =>$faultstring<= occurred, please check manually."
+    return 1
+  fi
+
+  zonen="$(echo "$response" | sed 's/<item>/\n/g' | sed -r 's/(.*<key xsi:type="xsd:string">domain_name<\/key><value xsi:type="xsd:string">)(.*)(<\/value.*)/\2/' | sed '/^</d')"
+  domain="$1"
+  temp_domain="$(echo "$1" | sed 's/\.$//')"
+  rootzone="$domain"
+  for i in $zonen; do
+    l1=${#rootzone}
     l2=${#i}
-    if _endswith "$_domain" "$i" && [ "$l1" -ge "$l2" ]; then
-      _rootzone="$i"
+    if _endswith "$domain" "$i" && [ "$l1" -ge "$l2" ]; then
+      rootzone="$i"
     fi
   done
-  _zone="${_rootzone}."
-  _temp_record_name="$(echo "$_temp_domain" | sed "s/$_rootzone//g")"
-  _record_name="$(echo "$_temp_record_name" | sed 's/\.$//')"
-  _debug2 "Zone:" "$_zone"
-  _debug2 "Domain:" "$_domain"
-  _debug2 "Record_Name:" "$_record_name"
+  _zone="${rootzone}."
+  temp_record_name="$(echo "$temp_domain" | sed "s/$rootzone//g")"
+  _record_name="$(echo "$temp_record_name" | sed 's/\.$//')"
+  _debug "[KAS] -> Zone:" "$_zone"
+  _debug "[KAS] -> Domain:" "$domain"
+  _debug "[KAS] -> Record_Name:" "$_record_name"
   return 0
 }
 
 # Retrieve the DNS record ID
 _get_record_id() {
-  params="?kas_login=$KAS_Login"
-  params="$params&kas_auth_type=$KAS_Authtype"
-  params="$params&kas_auth_data=$KAS_Authdata"
-  params="$params&kas_action=get_dns_settings"
-  params="$params&var1=zone_host"
-  params="$params&wert1=$_zone"
-
-  _debug2 "Wait for 10 seconds by default before calling KAS API."
-  _sleep 10
-  response="$(_get "$KAS_Api$params")"
-  _debug2 "response" "$response"
-  _record_id="$(echo "$response" | tr -d "\n\r" | tr -d " " | tr '[]' '<>' | sed "s/=>Array/\n=> Array/g" | tr ' ' '\n' | grep "=>$_record_name<" | grep '>TXT<' | tr '<' '\n' | grep record_id | sed "s/record_id>=>//g")"
-  _debug2 _record_id "$_record_id"
+  action="get_dns_settings"
+  kasReqParam="\"zone_host\":\"$_zone\""
+  response="$(_callAPI "$action" "$kasReqParam")"
+  _debug2 "[KAS] -> Response" "$response"
+
+  if [ -z "$response" ]; then
+    _info "[KAS] -> Response was empty, please check manually."
+    return 1
+  elif _contains "$response" "<SOAP-ENV:Fault>"; then
+    faultstring="$(echo "$response" | tr -d '\n\r' | sed "s/<faultstring>/\n=> /g" | sed "s/<\/faultstring>/\n/g" | grep "=>" | sed "s/=> //g")"
+    _err "[KAS] -> Either no domains were found or another error =>$faultstring<= occurred, please check manually."
+    return 1
+  fi
+
+  _record_id="$(echo "$response" | tr -d '\n\r' | sed "s/<item xsi:type=\"ns2:Map\">/\n/g" | grep -i "$_record_name" | grep -i ">TXT<" | sed "s/<item><key xsi:type=\"xsd:string\">record_id<\/key><value xsi:type=\"xsd:string\">/=>/g" | grep -i "$_txtvalue" | sed "s/<\/value><\/item>/\n/g" | grep "=>" | sed "s/=>//g")"
+  _debug "[KAS] -> Record Id: " "$_record_id"
+  return 0
+}
+
+# Retrieve credential token
+_get_credential_token() {
+  baseParamAuth="\"kas_login\":\"$KAS_Login\""
+  baseParamAuth="$baseParamAuth,\"kas_auth_type\":\"$KAS_Authtype\""
+  baseParamAuth="$baseParamAuth,\"kas_auth_data\":\"$KAS_Authdata\""
+  baseParamAuth="$baseParamAuth,\"session_lifetime\":600"
+  baseParamAuth="$baseParamAuth,\"session_update_lifetime\":\"Y\""
+
+  data='<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="urn:xmethodsKasApiAuthentication" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><ns1:KasAuth><Params xsi:type="xsd:string">{'
+  data="$data$baseParamAuth}</Params></ns1:KasAuth></SOAP-ENV:Body></SOAP-ENV:Envelope>"
+
+  _debug "[KAS] -> Be friendly and wait $KAS_default_ratelimit seconds by default before calling KAS API."
+  _sleep $KAS_default_ratelimit
+
+  contentType="text/xml"
+  export _H1="SOAPAction: urn:xmethodsKasApiAuthentication#KasAuth"
+  response="$(_post "$data" "$KAS_Auth" "" "POST" "$contentType")"
+  _debug2 "[KAS] -> Response" "$response"
+
+  if [ -z "$response" ]; then
+    _info "[KAS] -> Response was empty, please check manually."
+    return 1
+  elif _contains "$response" "<SOAP-ENV:Fault>"; then
+    faultstring="$(echo "$response" | tr -d '\n\r' | sed "s/<faultstring>/\n=> /g" | sed "s/<\/faultstring>/\n/g" | grep "=>" | sed "s/=> //g")"
+    _err "[KAS] -> Could not retrieve login token or antoher error =>$faultstring<= occurred, please check manually."
+    return 1
+  fi
+
+  _credential_token="$(echo "$response" | tr '\n' ' ' | sed 's/.*return xsi:type="xsd:string">\(.*\)<\/return>/\1/' | sed 's/<\/ns1:KasAuthResponse\(.*\)Envelope>.*//')"
+  _debug "[KAS] -> Credential Token: " "$_credential_token"
   return 0
 }
+
+_callAPI() {
+  kasaction=$1
+  kasReqParams=$2
+
+  baseParamAuth="\"kas_login\":\"$KAS_Login\""
+  baseParamAuth="$baseParamAuth,\"kas_auth_type\":\"session\""
+  baseParamAuth="$baseParamAuth,\"kas_auth_data\":\"$_credential_token\""
+
+  data='<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="urn:xmethodsKasApi" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><ns1:KasApi><Params xsi:type="xsd:string">{'
+  data="$data$baseParamAuth,\"kas_action\":\"$kasaction\""
+  if [ -n "$kasReqParams" ]; then
+    data="$data,\"KasRequestParams\":{$kasReqParams}"
+  fi
+  data="$data}</Params></ns1:KasApi></SOAP-ENV:Body></SOAP-ENV:Envelope>"
+
+  _debug2 "[KAS] -> Request" "$data"
+
+  _debug "[KAS] -> Be friendly and wait $KAS_default_ratelimit seconds by default before calling KAS API."
+  _sleep $KAS_default_ratelimit
+
+  contentType="text/xml"
+  export _H1="SOAPAction: urn:xmethodsKasApi#KasApi"
+  response="$(_post "$data" "$KAS_Api" "" "POST" "$contentType")"
+  _debug2 "[KAS] -> Response" "$response"
+  echo "$response"
+}

dnsapi/dns_kinghost.sh

@@ -2,7 +2,7 @@
 
 ############################################################
 # KingHost API support                                     #
-# http://api.kinghost.net/doc/                             #
+# https://api.kinghost.net/doc/                             #
 #                                                          #
 # Author: Felipe Keller Braz <[email protected]>  #
 # Report Bugs here: https://github.com/kinghost/acme.sh    #

dnsapi/dns_knot.sh

@@ -19,8 +19,9 @@ dns_knot_add() {
 
   _info "Adding ${fulldomain}. 60 TXT \"${txtvalue}\""
 
-  knsupdate -y "${KNOT_KEY}" <<EOF
+  knsupdate <<EOF
 server ${KNOT_SERVER}
+key ${KNOT_KEY}
 zone ${_domain}.
 update add ${fulldomain}. 60 TXT "${txtvalue}"
 send
@@ -49,8 +50,9 @@ dns_knot_rm() {
 
   _info "Removing ${fulldomain}. TXT"
 
-  knsupdate -y "${KNOT_KEY}" <<EOF
+  knsupdate <<EOF
 server ${KNOT_SERVER}
+key ${KNOT_KEY}
 zone ${_domain}.
 update del ${fulldomain}. TXT
 send

dnsapi/dns_la.sh

@@ -0,0 +1,147 @@
+#!/usr/bin/env sh
+
+#LA_Id="test123"
+#LA_Key="d1j2fdo4dee3948"
+
+LA_Api="https://api.dns.la/api"
+
+########  Public functions #####################
+
+#Usage: dns_la_add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_la_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  LA_Id="${LA_Id:-$(_readaccountconf_mutable LA_Id)}"
+  LA_Key="${LA_Key:-$(_readaccountconf_mutable LA_Key)}"
+
+  if [ -z "$LA_Id" ] || [ -z "$LA_Key" ]; then
+    LA_Id=""
+    LA_Key=""
+    _err "You didn't specify a dnsla api id and key yet."
+    return 1
+  fi
+
+  #save the api key and email to the account conf file.
+  _saveaccountconf_mutable LA_Id "$LA_Id"
+  _saveaccountconf_mutable LA_Key "$LA_Key"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _info "Adding record"
+  if _la_rest "record.ashx?cmd=create&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domainid=$_domain_id&host=$_sub_domain&recordtype=TXT&recorddata=$txtvalue&recordline="; then
+    if _contains "$response" '"resultid":'; then
+      _info "Added, OK"
+      return 0
+    elif _contains "$response" '"code":532'; then
+      _info "Already exists, OK"
+      return 0
+    else
+      _err "Add txt record error."
+      return 1
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+
+}
+
+#fulldomain txtvalue
+dns_la_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  LA_Id="${LA_Id:-$(_readaccountconf_mutable LA_Id)}"
+  LA_Key="${LA_Key:-$(_readaccountconf_mutable LA_Key)}"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting txt records"
+  if ! _la_rest "record.ashx?cmd=listn&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domainid=$_domain_id&domain=$_domain&host=$_sub_domain&recordtype=TXT&recorddata=$txtvalue"; then
+    _err "Error"
+    return 1
+  fi
+
+  if ! _contains "$response" '"recordid":'; then
+    _info "Don't need to remove."
+    return 0
+  fi
+
+  record_id=$(printf "%s" "$response" | grep '"recordid":' | cut -d : -f 2 | cut -d , -f 1 | tr -d '\r' | tr -d '\n')
+  _debug "record_id" "$record_id"
+  if [ -z "$record_id" ]; then
+    _err "Can not get record id to remove."
+    return 1
+  fi
+  if ! _la_rest "record.ashx?cmd=remove&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domainid=$_domain_id&domain=$_domain&recordid=$record_id"; then
+    _err "Delete record error."
+    return 1
+  fi
+  _contains "$response" '"code":300'
+
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+# _domain_id=sdjkglgdfewsdfg
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    if ! _la_rest "domain.ashx?cmd=get&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domain=$h"; then
+      return 1
+    fi
+
+    if _contains "$response" '"domainid":'; then
+      _domain_id=$(printf "%s" "$response" | grep '"domainid":' | cut -d : -f 2 | cut -d , -f 1 | tr -d '\r' | tr -d '\n')
+      if [ "$_domain_id" ]; then
+        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+        _domain="$h"
+        return 0
+      fi
+      return 1
+    fi
+    p="$i"
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+#Usage:  URI
+_la_rest() {
+  url="$LA_Api/$1"
+  _debug "$url"
+
+  if ! response="$(_get "$url" | tr -d ' ' | tr "}" ",")"; then
+    _err "Error: $url"
+    return 1
+  fi
+
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_leaseweb.sh

@@ -3,10 +3,10 @@
 #Author: Rolph Haspers <[email protected]>
 #Utilize leaseweb.com API to finish dns-01 verifications.
 #Requires a Leaseweb API Key (export LSW_Key="Your Key")
-#See http://developer.leaseweb.com for more information.
+#See https://developer.leaseweb.com for more information.
 ########  Public functions #####################
 
-LSW_API="https://api.leaseweb.com/hosting/v2/domains/"
+LSW_API="https://api.leaseweb.com/hosting/v2/domains"
 
 #Usage: dns_leaseweb_add   _acme-challenge.www.domain.com
 dns_leaseweb_add() {

dnsapi/dns_linode_v4.sh

@@ -106,6 +106,7 @@ dns_linode_v4_rm() {
 ####################  Private functions below ##################################
 
 _Linode_API() {
+  LINODE_V4_API_KEY="${LINODE_V4_API_KEY:-$(_readaccountconf_mutable LINODE_V4_API_KEY)}"
   if [ -z "$LINODE_V4_API_KEY" ]; then
     LINODE_V4_API_KEY=""
 
@@ -115,7 +116,7 @@ _Linode_API() {
     return 1
   fi
 
-  _saveaccountconf LINODE_V4_API_KEY "$LINODE_V4_API_KEY"
+  _saveaccountconf_mutable LINODE_V4_API_KEY "$LINODE_V4_API_KEY"
 }
 
 ####################  Private functions below ##################################

dnsapi/dns_loopia.sh

@@ -32,8 +32,12 @@ dns_loopia_add() {
 
   _info "Adding record"
 
-  _loopia_add_sub_domain "$_domain" "$_sub_domain"
-  _loopia_add_record "$_domain" "$_sub_domain" "$txtvalue"
+  if ! _loopia_add_sub_domain "$_domain" "$_sub_domain"; then
+    return 1
+  fi
+  if ! _loopia_add_record "$_domain" "$_sub_domain" "$txtvalue"; then
+    return 1
+  fi
 
 }
 
@@ -70,12 +74,13 @@ dns_loopia_rm() {
         <value><string>%s</string></value>
       </param>
     </params>
-  </methodCall>' "$LOOPIA_User" "$LOOPIA_Password" "$_domain" "$_sub_domain")
+  </methodCall>' "$LOOPIA_User" "$Encoded_Password" "$_domain" "$_sub_domain")
 
   response="$(_post "$xml_content" "$LOOPIA_Api" "" "POST")"
 
   if ! _contains "$response" "OK"; then
-    _err "Error could not get txt records"
+    err_response=$(echo "$response" | sed 's/.*<string>\(.*\)<\/string>.*/\1/')
+    _err "Error could not get txt records: $err_response"
     return 1
   fi
 }
@@ -101,6 +106,12 @@ _loopia_load_config() {
     return 1
   fi
 
+  if _contains "$LOOPIA_Password" "'" || _contains "$LOOPIA_Password" '"'; then
+    _err "Password contains a quotation mark or double quotation marks and this is not supported by dns_loopia.sh"
+    return 1
+  fi
+
+  Encoded_Password=$(_xml_encode "$LOOPIA_Password")
   return 0
 }
 
@@ -133,11 +144,12 @@ _loopia_get_records() {
         <value><string>%s</string></value>
       </param>
     </params>
-  </methodCall>' $LOOPIA_User $LOOPIA_Password "$domain" "$sub_domain")
+  </methodCall>' "$LOOPIA_User" "$Encoded_Password" "$domain" "$sub_domain")
 
   response="$(_post "$xml_content" "$LOOPIA_Api" "" "POST")"
   if ! _contains "$response" "<array>"; then
-    _err "Error"
+    err_response=$(echo "$response" | sed 's/.*<string>\(.*\)<\/string>.*/\1/')
+    _err "Error: $err_response"
     return 1
   fi
   return 0
@@ -162,7 +174,7 @@ _get_root() {
     <value><string>%s</string></value>
    </param>
   </params>
-  </methodCall>' $LOOPIA_User $LOOPIA_Password)
+  </methodCall>' "$LOOPIA_User" "$Encoded_Password")
 
   response="$(_post "$xml_content" "$LOOPIA_Api" "" "POST")"
   while true; do
@@ -206,32 +218,35 @@ _loopia_add_record() {
         <value><string>%s</string></value>
       </param>
       <param>
-        <struct>
-          <member>
-            <name>type</name>
-            <value><string>TXT</string></value>
-          </member>
-          <member>
-            <name>priority</name>
-            <value><int>0</int></value>
-          </member>
-          <member>
-            <name>ttl</name>
-            <value><int>300</int></value>
-          </member>
-          <member>
-            <name>rdata</name>
-            <value><string>%s</string></value>
-          </member>
-        </struct>
+        <value>
+          <struct>
+            <member>
+              <name>type</name>
+              <value><string>TXT</string></value>
+            </member>
+            <member>
+              <name>priority</name>
+              <value><int>0</int></value>
+            </member>
+            <member>
+              <name>ttl</name>
+              <value><int>300</int></value>
+            </member>
+            <member>
+              <name>rdata</name>
+              <value><string>%s</string></value>
+            </member>
+          </struct>
+        </value>
       </param>
     </params>
-  </methodCall>' $LOOPIA_User $LOOPIA_Password "$domain" "$sub_domain" "$txtval")
+  </methodCall>' "$LOOPIA_User" "$Encoded_Password" "$domain" "$sub_domain" "$txtval")
 
   response="$(_post "$xml_content" "$LOOPIA_Api" "" "POST")"
 
   if ! _contains "$response" "OK"; then
-    _err "Error"
+    err_response=$(echo "$response" | sed 's/.*<string>\(.*\)<\/string>.*/\1/')
+    _err "Error: $err_response"
     return 1
   fi
   return 0
@@ -255,7 +270,7 @@ _sub_domain_exists() {
         <value><string>%s</string></value>
       </param>
     </params>
-  </methodCall>' $LOOPIA_User $LOOPIA_Password "$domain")
+  </methodCall>' "$LOOPIA_User" "$Encoded_Password" "$domain")
 
   response="$(_post "$xml_content" "$LOOPIA_Api" "" "POST")"
 
@@ -290,13 +305,22 @@ _loopia_add_sub_domain() {
         <value><string>%s</string></value>
       </param>
     </params>
-  </methodCall>' $LOOPIA_User $LOOPIA_Password "$domain" "$sub_domain")
+  </methodCall>' "$LOOPIA_User" "$Encoded_Password" "$domain" "$sub_domain")
 
   response="$(_post "$xml_content" "$LOOPIA_Api" "" "POST")"
 
   if ! _contains "$response" "OK"; then
-    _err "Error"
+    err_response=$(echo "$response" | sed 's/.*<string>\(.*\)<\/string>.*/\1/')
+    _err "Error: $err_response"
     return 1
   fi
   return 0
 }
+
+_xml_encode() {
+  encoded_string=$1
+  encoded_string=$(echo "$encoded_string" | sed 's/&/\&amp;/')
+  encoded_string=$(echo "$encoded_string" | sed 's/</\&lt;/')
+  encoded_string=$(echo "$encoded_string" | sed 's/>/\&gt;/')
+  printf "%s" "$encoded_string"
+}

dnsapi/dns_miab.sh

@@ -163,6 +163,7 @@ _retrieve_miab_env() {
   _saveaccountconf_mutable MIAB_Username "$MIAB_Username"
   _saveaccountconf_mutable MIAB_Password "$MIAB_Password"
   _saveaccountconf_mutable MIAB_Server "$MIAB_Server"
+  return 0
 }
 
 #Useage: _miab_rest  "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"  "custom/_acme-challenge.www.domain.com/txt  "POST"

dnsapi/dns_mydevil.sh

@@ -74,7 +74,7 @@ dns_mydevil_rm() {
   validRecords="^${num}${w}${fulldomain}${w}TXT${w}${any}${txtvalue}$"
   for id in $(devil dns list "$domain" | tail -n+2 | grep "${validRecords}" | cut -w -s -f 1); do
     _info "Removing record $id from domain $domain"
-    devil dns del "$domain" "$id" || _err "Could not remove DNS record."
+    echo "y" | devil dns del "$domain" "$id" || _err "Could not remove DNS record."
   done
 }
 
@@ -87,7 +87,9 @@ mydevil_get_domain() {
   domain=""
 
   for domain in $(devil dns list | cut -w -s -f 1 | tail -n+2); do
+    _debug "Checking domain: $domain"
     if _endswith "$fulldomain" "$domain"; then
+      _debug "Fulldomain '$fulldomain' matches '$domain'"
       printf -- "%s" "$domain"
       return 0
     fi

dnsapi/dns_mydnsjp.sh

@@ -150,7 +150,7 @@ _get_root() {
 _mydnsjp_retrieve_domain() {
   _debug "Login to MyDNS.JP"
 
-  response="$(_post "masterid=$MYDNSJP_MasterID&masterpwd=$MYDNSJP_Password" "$MYDNSJP_API/?MENU=100")"
+  response="$(_post "MENU=100&masterid=$MYDNSJP_MasterID&masterpwd=$MYDNSJP_Password" "$MYDNSJP_API/members/")"
   cookie="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _head_n 1 | cut -d " " -f 2)"
 
   # If cookies is not empty then logon successful
@@ -159,22 +159,8 @@ _mydnsjp_retrieve_domain() {
     return 1
   fi
 
-  _debug "Retrieve DOMAIN INFO page"
-
-  export _H1="Cookie:${cookie}"
-
-  response="$(_get "$MYDNSJP_API/?MENU=300")"
-
-  if [ "$?" != "0" ]; then
-    _err "Fail to retrieve DOMAIN INFO."
-    return 1
-  fi
-
   _root_domain=$(echo "$response" | grep "DNSINFO\[domainname\]" | sed 's/^.*value="\([^"]*\)".*/\1/')
 
-  # Logout
-  response="$(_get "$MYDNSJP_API/?MENU=090")"
-
   _debug _root_domain "$_root_domain"
 
   if [ -z "$_root_domain" ]; then

dnsapi/dns_mythic_beasts.sh

@@ -0,0 +1,261 @@
+#!/usr/bin/env sh
+# Mythic Beasts is a long-standing UK service provider using standards-based OAuth2 authentication
+# To test: ./acme.sh --dns dns_mythic_beasts --test --debug 1 --output-insecure --issue --domain domain.com
+# Cannot retest once cert is issued
+# OAuth2 tokens only valid for 300 seconds so we do not store
+# NOTE: This will remove all TXT records matching the fulldomain, not just the added ones (_acme-challenge.www.domain.com)
+
+# Test OAuth2 credentials
+#MB_AK="aaaaaaaaaaaaaaaa"
+#MB_AS="bbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"
+
+# URLs
+MB_API='https://api.mythic-beasts.com/dns/v2/zones'
+MB_AUTH='https://auth.mythic-beasts.com/login'
+
+########  Public functions #####################
+
+#Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_mythic_beasts_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "MYTHIC BEASTS Adding record $fulldomain = $txtvalue"
+  if ! _initAuth; then
+    return 1
+  fi
+
+  if ! _get_root "$fulldomain"; then
+    return 1
+  fi
+
+  # method path body_data
+  if _mb_rest POST "$_domain/records/$_sub_domain/TXT" "$txtvalue"; then
+
+    if _contains "$response" "1 records added"; then
+      _info "Added, verifying..."
+      # Max 120 seconds to publish
+      for i in $(seq 1 6); do
+        # Retry on error
+        if ! _mb_rest GET "$_domain/records/$_sub_domain/TXT?verify"; then
+          _sleep 20
+        else
+          _info "Record published!"
+          return 0
+        fi
+      done
+
+    else
+      _err "\n$response"
+    fi
+
+  fi
+  _err "Add txt record error."
+  return 1
+}
+
+#Usage: rm  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_mythic_beasts_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "MYTHIC BEASTS Removing record $fulldomain = $txtvalue"
+  if ! _initAuth; then
+    return 1
+  fi
+
+  if ! _get_root "$fulldomain"; then
+    return 1
+  fi
+
+  # method path body_data
+  if _mb_rest DELETE "$_domain/records/$_sub_domain/TXT" "$txtvalue"; then
+    _info "Record removed"
+    return 0
+  fi
+  _err "Remove txt record error."
+  return 1
+}
+
+####################  Private functions below ##################################
+
+#Possible formats:
+# _acme-challenge.www.example.com
+# _acme-challenge.example.com
+# _acme-challenge.example.co.uk
+# _acme-challenge.www.example.co.uk
+# _acme-challenge.sub1.sub2.www.example.co.uk
+# sub1.sub2.example.co.uk
+# example.com
+# example.co.uk
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  _debug "Detect the root zone"
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f $i-100)
+    if [ -z "$h" ]; then
+      _err "Domain exhausted"
+      return 1
+    fi
+
+    # Use the status errors to find the domain, continue on 403 Access denied
+    # method path body_data
+    _mb_rest GET "$h/records"
+    ret="$?"
+    if [ "$ret" -eq 0 ]; then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
+      _domain="$h"
+      _debug _sub_domain "$_sub_domain"
+      _debug _domain "$_domain"
+      return 0
+    elif [ "$ret" -eq 1 ]; then
+      return 1
+    fi
+
+    p=$i
+    i=$(_math "$i" + 1)
+
+    if [ "$i" -gt 50 ]; then
+      break
+    fi
+  done
+  _err "Domain too long"
+  return 1
+}
+
+_initAuth() {
+  MB_AK="${MB_AK:-$(_readaccountconf_mutable MB_AK)}"
+  MB_AS="${MB_AS:-$(_readaccountconf_mutable MB_AS)}"
+
+  if [ -z "$MB_AK" ] || [ -z "$MB_AS" ]; then
+    MB_AK=""
+    MB_AS=""
+    _err "Please specify an OAuth2 Key & Secret"
+    return 1
+  fi
+
+  _saveaccountconf_mutable MB_AK "$MB_AK"
+  _saveaccountconf_mutable MB_AS "$MB_AS"
+
+  if ! _oauth2; then
+    return 1
+  fi
+
+  _info "Checking authentication"
+  _secure_debug access_token "$MB_TK"
+  _sleep 1
+
+  # GET a list of zones
+  # method path body_data
+  if ! _mb_rest GET ""; then
+    _err "The token is invalid"
+    return 1
+  fi
+  _info "Token OK"
+  return 0
+}
+
+# Github appears to use an outbound proxy for requests which means subsequent requests may not have the same
+# source IP. The standard Mythic Beasts OAuth2 tokens are tied to an IP, meaning github test requests fail
+# authentication. This is a work around using an undocumented MB API to obtain a token not tied to an
+# IP just for the github tests.
+_oauth2() {
+  if [ "$GITHUB_ACTIONS" = "true" ]; then
+    _oauth2_github
+  else
+    _oauth2_std
+  fi
+  return $?
+}
+
+_oauth2_std() {
+  # HTTP Basic Authentication
+  _H1="Authorization: Basic $(echo "$MB_AK:$MB_AS" | _base64)"
+  _H2="Accepts: application/json"
+  export _H1 _H2
+  body="grant_type=client_credentials"
+
+  _info "Getting OAuth2 token..."
+  # body  url [needbase64] [POST|PUT|DELETE] [ContentType]
+  response="$(_post "$body" "$MB_AUTH" "" "POST" "application/x-www-form-urlencoded")"
+  if _contains "$response" "\"token_type\":\"bearer\""; then
+    MB_TK="$(echo "$response" | _egrep_o "access_token\":\"[^\"]*\"" | cut -d : -f 2 | tr -d '"')"
+    if [ -z "$MB_TK" ]; then
+      _err "Unable to get access_token"
+      _err "\n$response"
+      return 1
+    fi
+  else
+    _err "OAuth2 token_type not Bearer"
+    _err "\n$response"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}
+
+_oauth2_github() {
+  _H1="Accepts: application/json"
+  export _H1
+  body="{\"login\":{\"handle\":\"$MB_AK\",\"pass\":\"$MB_AS\",\"floating\":1}}"
+
+  _info "Getting Floating token..."
+  # body  url [needbase64] [POST|PUT|DELETE] [ContentType]
+  response="$(_post "$body" "$MB_AUTH" "" "POST" "application/json")"
+  MB_TK="$(echo "$response" | _egrep_o "\"token\":\"[^\"]*\"" | cut -d : -f 2 | tr -d '"')"
+  if [ -z "$MB_TK" ]; then
+    _err "Unable to get token"
+    _err "\n$response"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}
+
+# method path body_data
+_mb_rest() {
+  # URL encoded body for single API operations
+  m="$1"
+  ep="$2"
+  data="$3"
+
+  if [ -z "$ep" ]; then
+    _mb_url="$MB_API"
+  else
+    _mb_url="$MB_API/$ep"
+  fi
+
+  _H1="Authorization: Bearer $MB_TK"
+  _H2="Accepts: application/json"
+  export _H1 _H2
+  if [ "$data" ] || [ "$m" = "POST" ] || [ "$m" = "PUT" ] || [ "$m" = "DELETE" ]; then
+    # body  url [needbase64] [POST|PUT|DELETE] [ContentType]
+    response="$(_post "data=$data" "$_mb_url" "" "$m" "application/x-www-form-urlencoded")"
+  else
+    response="$(_get "$_mb_url")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "Request error"
+    return 1
+  fi
+
+  header="$(cat "$HTTP_HEADER")"
+  status="$(echo "$header" | _egrep_o "^HTTP[^ ]* .*$" | cut -d " " -f 2-100 | tr -d "\f\n")"
+  code="$(echo "$status" | _egrep_o "^[0-9]*")"
+  if [ "$code" -ge 400 ] || _contains "$response" "\"error\"" || _contains "$response" "invalid_client"; then
+    _err "error $status"
+    _err "\n$response"
+    _debug "\n$header"
+    return 2
+  fi
+
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_namecheap.sh

@@ -82,7 +82,7 @@ _get_root() {
     _debug "Failed domain lookup via domains.getList api call. Trying domain lookup via domains.dns.getHosts api."
     # The above "getList" api will only return hosts *owned* by the calling user. However, if the calling
     # user is not the owner, but still has administrative rights, we must query the getHosts api directly.
-    # See this comment and the official namecheap response: http://disq.us/p/1q6v9x9
+    # See this comment and the official namecheap response: https://disq.us/p/1q6v9x9
     if ! _get_root_by_getHosts "$fulldomain"; then
       return 1
     fi
@@ -157,7 +157,7 @@ _namecheap_set_publicip() {
 
   if [ -z "$NAMECHEAP_SOURCEIP" ]; then
     _err "No Source IP specified for Namecheap API."
-    _err "Use your public ip address or an url to retrieve it (e.g. https://ipconfig.co/ip) and export it as NAMECHEAP_SOURCEIP"
+    _err "Use your public ip address or an url to retrieve it (e.g. https://ifconfig.co/ip) and export it as NAMECHEAP_SOURCEIP"
     return 1
   else
     _saveaccountconf NAMECHEAP_SOURCEIP "$NAMECHEAP_SOURCEIP"
@@ -175,7 +175,7 @@ _namecheap_set_publicip() {
       _publicip=$(_get "$addr")
     else
       _err "No Source IP specified for Namecheap API."
-      _err "Use your public ip address or an url to retrieve it (e.g. https://ipconfig.co/ip) and export it as NAMECHEAP_SOURCEIP"
+      _err "Use your public ip address or an url to retrieve it (e.g. https://ifconfig.co/ip) and export it as NAMECHEAP_SOURCEIP"
       return 1
     fi
   fi
@@ -208,7 +208,7 @@ _namecheap_parse_host() {
   _hostid=$(echo "$_host" | _egrep_o ' HostId="[^"]*' | cut -d '"' -f 2)
   _hostname=$(echo "$_host" | _egrep_o ' Name="[^"]*' | cut -d '"' -f 2)
   _hosttype=$(echo "$_host" | _egrep_o ' Type="[^"]*' | cut -d '"' -f 2)
-  _hostaddress=$(echo "$_host" | _egrep_o ' Address="[^"]*' | cut -d '"' -f 2)
+  _hostaddress=$(echo "$_host" | _egrep_o ' Address="[^"]*' | cut -d '"' -f 2 | _xml_decode)
   _hostmxpref=$(echo "$_host" | _egrep_o ' MXPref="[^"]*' | cut -d '"' -f 2)
   _hostttl=$(echo "$_host" | _egrep_o ' TTL="[^"]*' | cut -d '"' -f 2)
 
@@ -259,7 +259,7 @@ _set_namecheap_TXT() {
   _debug hosts "$hosts"
 
   if [ -z "$hosts" ]; then
-    _error "Hosts not found"
+    _err "Hosts not found"
     return 1
   fi
 
@@ -313,7 +313,7 @@ _del_namecheap_TXT() {
   _debug hosts "$hosts"
 
   if [ -z "$hosts" ]; then
-    _error "Hosts not found"
+    _err "Hosts not found"
     return 1
   fi
 
@@ -405,3 +405,7 @@ _namecheap_set_tld_sld() {
   done
 
 }
+
+_xml_decode() {
+  sed 's/"/"/g'
+}

dnsapi/dns_namesilo.sh

@@ -110,7 +110,7 @@ _get_root() {
       return 1
     fi
 
-    if _contains "$response" "<domain>$host"; then
+    if _contains "$response" ">$host</domain>"; then
       _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p)
       _domain="$host"
       return 0

dnsapi/dns_nanelo.sh

@@ -0,0 +1,59 @@
+#!/usr/bin/env sh
+
+# Official DNS API for Nanelo.com
+
+# Provide the required API Key like this:
+# NANELO_TOKEN="FmD408PdqT1E269gUK57"
+
+NANELO_API="https://api.nanelo.com/v1/"
+
+########  Public functions #####################
+
+# Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_nanelo_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  NANELO_TOKEN="${NANELO_TOKEN:-$(_readaccountconf_mutable NANELO_TOKEN)}"
+  if [ -z "$NANELO_TOKEN" ]; then
+    NANELO_TOKEN=""
+    _err "You didn't configure a Nanelo API Key yet."
+    _err "Please set NANELO_TOKEN and try again."
+    _err "Login to Nanelo.com and go to Settings > API Keys to get a Key"
+    return 1
+  fi
+  _saveaccountconf_mutable NANELO_TOKEN "$NANELO_TOKEN"
+
+  _info "Adding TXT record to ${fulldomain}"
+  response="$(_get "$NANELO_API$NANELO_TOKEN/dns/addrecord?type=TXT&ttl=60&name=${fulldomain}&value=${txtvalue}")"
+  if _contains "${response}" 'success'; then
+    return 0
+  fi
+  _err "Could not create resource record, please check the logs"
+  _err "${response}"
+  return 1
+}
+
+dns_nanelo_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  NANELO_TOKEN="${NANELO_TOKEN:-$(_readaccountconf_mutable NANELO_TOKEN)}"
+  if [ -z "$NANELO_TOKEN" ]; then
+    NANELO_TOKEN=""
+    _err "You didn't configure a Nanelo API Key yet."
+    _err "Please set NANELO_TOKEN and try again."
+    _err "Login to Nanelo.com and go to Settings > API Keys to get a Key"
+    return 1
+  fi
+  _saveaccountconf_mutable NANELO_TOKEN "$NANELO_TOKEN"
+
+  _info "Deleting resource record $fulldomain"
+  response="$(_get "$NANELO_API$NANELO_TOKEN/dns/deleterecord?type=TXT&ttl=60&name=${fulldomain}&value=${txtvalue}")"
+  if _contains "${response}" 'success'; then
+    return 0
+  fi
+  _err "Could not delete resource record, please check the logs"
+  _err "${response}"
+  return 1
+}