coturn/man/man1/turnserver.1

.\" Text automatically generated by txt2man
.TH TURN 1 "05 June 2021" "" ""
.SH GENERAL INFORMATION

The \fBTURN Server\fP project contains the source code of a TURN server and TURN client
messaging library. Also, some extra programs provided, for testing\-only
purposes.
.PP
See the INSTALL file for the building instructions.
.PP
After the build, you will have the following binary images:
.TP
.B
1.
\fIturnserver\fP: \fBTURN Server\fP relay.
The compiled binary image of the \fBTURN Server\fP program is located in bin/ sub\-directory.
.TP
.B
2.
\fIturnadmin\fP: TURN administration tool. See README.turnadmin and \fIturnadmin\fP man page.
.TP
.B
3.
turnutils_uclient. See README.turnutils and \fIturnutils\fP man page.
.TP
.B
4.
turnutils_peer. See README.turnutils and \fIturnutils\fP man page.
.TP
.B
5.
turnutils_stunclient. See README.turnutils and \fIturnutils\fP man page.
.TP
.B
6.
turnutils_rfc5769check. See README.turnutils and \fIturnutils\fP man page.
.PP
In the "examples/scripts" sub\-directory, you will find the examples of command lines to be used
to run the programs. The scripts are meant to be run from examples/ sub\-directory, for example:
.PP
$ cd examples
$ ./scripts/secure_relay.sh
.SH SYSTEMD

If the systemd development library is available, then it will notify systemd about the server status.
.SH RUNNING THE TURN SERVER

To run the coturn server as a daemon use:
.PP
.nf
.fam C
  $ turnserver \-o

.fam T
.fi
Note that if you make any changes to the config file the server has to be restarted.
.PP
Options note: \fIturnserver\fP has long and short option names, for most options.
Some options have only long form, some options have only short form. Their syntax
somewhat different, if an argument is required:
.PP
The short form must be used as this (for example):
.PP
.nf
.fam C
  $ turnserver \-L 12.34.56.78

.fam T
.fi
The long form equivalent must use the "=" character:
.PP
.nf
.fam C
  $ turnserver \-\-listening\-ip=12.34.56.78

.fam T
.fi
If this is a flag option (no argument required) then their usage are the same, for example:
.PP
.nf
.fam C
 $ turnserver \-a

.fam T
.fi
is equivalent to:
.PP
.nf
.fam C
 $ turnserver \-\-lt\-cred\-mech

.fam T
.fi
.SH =====================================

.SS  NAME
\fB
\fBturnserver \fP\- a TURN relay server implementation.
\fB
.SS  SYNOPSIS
.nf
.fam C

$ \fIturnserver\fP [\fB\-n\fP | \fB\-c\fP <config\-file> ] [\fIflags\fP] [ \fB\-\-userdb\fP=<userdb\-file> | \fB\-\-psql\-userdb\fP=<db\-conn\-string> | \fB\-\-mysql\-userdb\fP=<db\-conn\-string>  | \fB\-\-mongo\-userdb\fP=<db\-conn\-string>  | \fB\-\-redis\-userdb\fP=<db\-conn\-string> ] [\fB\-z\fP | \fB\-\-no\-auth\fP | \fB\-a\fP | \fB\-\-lt\-cred\-mech\fP ] [\fIoptions\fP]
$ \fIturnserver\fP \fB\-h\fP

.fam T
.fi
.fam T
.fi
.SS  DESCRIPTION

Config file settings:
.TP
.B
\fB\-n\fP
Do not use configuration file, use only command line parameters.
.TP
.B
\fB\-c\fP
Configuration file name (default \- turnserver.conf).
The format of config file can be seen in
the supplied examples/etc/turnserver.conf example file. Long
names of the \fIoptions\fP are used as the configuration
items names in the file. If not an absolute path is supplied,
then the file is searched in the following directories:
.RS
.IP \(bu 3
current directory
.IP \(bu 3
current directory etc/ sub\-directory
.IP \(bu 3
upper directory level etc/
.IP \(bu 3
/etc/
.IP \(bu 3
/usr/local/etc/
.IP \(bu 3
installation directory /etc
.RE
.PP
User database settings:
.TP
.B
\fB\-b\fP, \fB\-\-db\fP, \fB\-\-userdb\fP
SQLite user database file name (default \- /var/db/turndb or
/usr/local/var/db/turndb or /var/lib/turn/turndb).
.TP
.B
\fB\-e\fP, \fB\-\-psql\-userdb\fP
User database connection string for PostgreSQL.
This database can be used for long\-term credentials mechanism,
and it can store the secret value
for secret\-based timed authentication in TURN REST API.
The connection string format is like that:
.RS
.PP
"host=<host> dbname=<dbname> user=<db\-user> password=<db\-user\-password> connect_timeout=<seconds>"
(for 8.x or newer Postgres).
.PP
Or:
.PP
"postgresql://username:password@hostname:port/databasename"
(for 9.x or newer Postgres).
.PP
See the INSTALL file for more explanations and examples.
.PP
Also, see http://www.PostgreSQL.org for full PostgreSQL documentation.
.RE
.TP
.B
\fB\-M\fP, \fB\-\-mysql\-userdb\fP
User database connection string for MySQL or MariaDB.
This database can be used for long\-term credentials mechanism,
and it can store the secret value for
secret\-based timed authentication in TURN REST API.
The connection string format is like that:
.RS
.PP
"host=<host> dbname=<dbname> user=<db\-user> password=<db\-user\-password> connect_timeout=<seconds> read_timeout=<seconds>"
.PP
See the INSTALL file for more explanations and examples.
.PP
Also, see http://www.mysql.org or http://mariadb.org
for full MySQL documentation.
.PP
Optional connection string parameters for the secure communications (SSL):
ca, capath, cert, key, cipher
(see http://dev.mysql.com/doc/refman/5.1/en/ssl\-options.html for the
command \fIoptions\fP description).
.RE
.TP
.B
\fB\-\-secret\-key\-file\fP
This is the file path which contain secret key of aes encryption while using MySQL password encryption.
If you want to use in the MySQL connection string the password in encrypted format,
then set in this option the file path of the secret key. The key which is used to encrypt MySQL password.
Warning: If this option is set, then MySQL password must be set in "mysql\-userdb" option in encrypted format!
If you want to use cleartext password then do not set this option!
.TP
.B
\fB\-J\fP, \fB\-\-mongo\-userdb\fP
User database connection string for MongoDB.
This database can be used for long\-term credentials mechanism,
and it can store the secret value
for secret\-based timed authentication in TURN REST API.
The connection string format is like that:
.RS
.PP
"mongodb://username:password@host:port/database?\fIoptions\fP"
.PP
See the INSTALL file for more explanations and examples.
.PP
Also, see http://docs.mongodb.org/manual/
for full MongoDB documentation.
.RE
.TP
.B
\fB\-N\fP, \fB\-\-redis\-userdb\fP
User database connection string for Redis.
This database can be used for long\-term credentials mechanism,
and it can store the secret
value for secret\-based timed authentication in TURN REST API.
The connection string format is like that:
.RS
.PP
"ip=<ip\-addr> dbname=<db\-number> password=<db\-password> connect_timeout=<seconds>"
.PP
See the INSTALL file for more explanations and examples.
.PP
Also, see http://redis.io for full Redis documentation.
.RE
.PP
Flags:
.TP
.B
\fB\-v\fP, \fB\-\-verbose\fP
Moderate verbose mode.
.TP
.B
\fB\-V\fP, \fB\-\-Verbose\fP
Extra verbose mode, very annoying and not recommended.
.TP
.B
\fB\-o\fP, \fB\-\-daemon\fP
Run server as daemon.
.PP
\fB\-\-no\-software\-attribute\fP Production mode: hide the software version.
.TP
.B
\fB\-f\fP, \fB\-\-fingerprint\fP
Use fingerprints in the TURN messages. If an incoming request
contains a fingerprint, then TURN server will always add
fingerprints to the messages in this session, regardless of the
per\-server setting.
.TP
.B
\fB\-a\fP, \fB\-\-lt\-cred\-mech\fP
Use long\-term credentials mechanism (this one you need for WebRTC usage).
.TP
.B
\fB\-z\fP, \fB\-\-no\-auth\fP
Do not use any credentials mechanism, allow anonymous access.
Opposite to \fB\-a\fP and \fB\-A\fP \fIoptions\fP. This is default option when no
authentication\-related \fIoptions\fP are set.
By default, no credential mechanism is used \-
any user is allowed.
.TP
.B
\fB\-\-use\-auth\-secret\fP
TURN REST API flag.
Flag that sets a special WebRTC authorization option
that is based upon authentication secret. The feature purpose
is to support "\fBTURN Server\fP REST API" as described in
the TURN REST API section below.
This option uses timestamp as part of combined username:
usercombo \-> "timestamp:username",
turn user \-> usercombo,
turn password \-> \fBbase64\fP(hmac(input_buffer = usercombo, key = shared\-secret)).
This allows TURN credentials to be accounted for a specific user id.
If you don't have a suitable id, the timestamp alone can be used.
This option is just turns on secret\-based authentication.
The actual value of the secret is defined either by option static\-auth\-secret,
or can be found in the turn_secret table in the database.
.TP
.B
\fB\-\-oauth\fP
Support oAuth authentication, as in the third\-party STUN/TURN RFC 7635.
.TP
.B
\fB\-\-dh566\fP
Use 566 bits predefined DH TLS key. Default size of the key is 2066.
.TP
.B
\fB\-\-dh1066\fP
Use 1066 bits predefined DH TLS key. Default size of the key is 2066.
.TP
.B
\fB\-\-tlsv1\fP
Set TLSv1 as a minimum supported protocol version.
.TP
.B
\fB\-\-tlsv1_1\fP
Set TLSv1.1 as a minimum supported protocol version.
.TP
.B
\fB\-\-no\-tlsv1_2\fP
Set TLSv1_3 as a minimum supported protocol version.
.TP
.B
\fB\-\-no\-udp\fP
Do not start UDP client listeners.
.TP
.B
\fB\-\-no\-tcp\fP
Do not start TCP client listeners.
.TP
.B
\fB\-\-no\-tls\fP
Do not start TLS client listeners.
.TP
.B
\fB\-\-no\-dtls\fP
Do not start DTLS client listeners.
.TP
.B
\fB\-\-no\-udp\-relay\fP
Do not allow UDP relay endpoints defined in RFC 5766,
use only TCP relay endpoints as defined in RFC 6062.
.TP
.B
\fB\-\-no\-tcp\-relay\fP
Do not allow TCP relay endpoints defined in RFC 6062,
use only UDP relay endpoints as defined in RFC 5766.
.TP
.B
\fB\-\-no\-stdout\-log\fP
Flag to prevent stdout log messages.
By default, all log messages are going to both stdout and to
the configured log file. With this option everything will be going to
the log file only (unless the log file itself is stdout).
.TP
.B
\fB\-\-syslog\fP
With this flag, all log will be redirected to the system log (syslog).
.TP
.B
\fB\-\-simple\-log\fP
This flag means that no log file rollover will be used, and the log file
name will be constructed as\-is, without PID and date appendage.
This option can be used, for example, together with the logrotate tool.
.TP
.B
\fB\-\-new\-log\-timestamp\fP
Enable full ISO\-8601 timestamp in all logs.
.TP
.B
\fB\-\-new\-log\-timestamp\-format\fP
<format>        Set timestamp format (in \fBstrftime\fP(1) format)
.TP
.B
\fB\-\-log\-binding\fP
Log STUN binding request. It is now disabled by default to avoid DoS attacks.
.TP
.B
\fB\-\-secure\-stun\fP
Require authentication of the STUN Binding request.
By default, the clients are allowed anonymous access to the STUN Binding functionality.
.TP
.B
\fB\-S\fP, \fB\-\-stun\-only\fP
Run as STUN server only, all TURN requests will be ignored.
Option to suppress TURN functionality, only STUN requests will be processed.
.TP
.B
\fB\-\-no\-stun\fP
Run as TURN server only, all STUN requests will be ignored.
Option to suppress STUN functionality, only TURN requests will be processed.
.TP
.B
\fB\-\-allow\-loopback\-peers\fP
Allow peers on the loopback addresses (127.x.x.x and ::1).
Allow it only for testing in a development environment!
In production it adds a possible security vulnerability,
and so due to security reasons, it is not allowed
using it together with empty cli\-password.
.TP
.B
\fB\-\-no\-multicast\-peers\fP
Disallow peers on well\-known broadcast addresses
(224.0.0.0 and above, and FFXX:*).
.TP
.B
\fB\-\-mobility\fP
Mobility with ICE (MICE) specs support.
.TP
.B
\fB\-\-no\-cli\fP
Turn OFF the CLI support. By default it is always ON.
See also \fIoptions\fP \fB\-\-cli\-ip\fP and \fB\-\-cli\-port\fP.
.TP
.B
\fB\-\-server\-relay\fP
Server relay. NON\-STANDARD AND DANGEROUS OPTION.
Only for those applications when we want to run
server applications on the relay endpoints.
This option eliminates the IP permissions check
on the packets incoming to the relay endpoints.
See http://tools.ietf.org/search/rfc5766#section\-17.2.3 .
.TP
.B
\fB\-\-udp\-self\-balance\fP
(recommended for older Linuxes only)
Automatically balance UDP traffic over auxiliary servers
(if configured). The load balancing is using the
ALTERNATE\-SERVER mechanism. The TURN client must support
300 ALTERNATE\-SERVER response for this functionality.
.TP
.B
\fB\-\-check\-origin\-consistency\fP
The flag that sets the origin consistency
check: across the session, all requests must have the same
main ORIGIN attribute value (if the ORIGIN was
initially used by the session).
.TP
.B
\fB\-\-prometheus\fP
Enable prometheus metrics. By default it is
disabled. Would listen on port 9641 under the path /metrics
also the path / on this port can be used as a health check
.RS
.TP
.B
\fB\-\-prometheus\-username\-labels\fP
Enable labeling prometheus traffic
metrics with client usernames. Labeling with client usernames is
disabled by default, because this may cause memory leaks when using
authentication with ephemeral usernames (e.g. TURN REST API).
.RE
.TP
.B
\fB\-\-prometheus\-port\fP
Prometheus listener port (Default: 9641).
.TP
.B
\fB\-h\fP
Help.
.PP
Options with values:
.TP
.B
\fB\-\-stale\-nonce\fP[=<value>]
Use extra security with nonce value having
limited lifetime, in seconds (default 600 secs).
Set it to 0 for unlimited nonce lifetime.
.TP
.B
\fB\-\-max\-allocate\-lifetime\fP
Set the maximum value for the allocation lifetime.
Default to 3600 secs.
.TP
.B
\fB\-\-channel\-lifetime\fP
Set the lifetime for channel binding, default to 600 secs.
This value MUST not be changed for production purposes.
.TP
.B
\fB\-\-permission\-lifetime\fP
Set the value for the lifetime of the permission.
Default to 300 secs.
This MUST not be changed for production purposes.
.TP
.B
\fB\-d\fP, \fB\-\-listening\-device\fP
Listener interface device.
(NOT RECOMMENDED. Optional functionality, Linux only).
The \fIturnserver\fP process must have root privileges to bind the
listening endpoint to a device. If \fIturnserver\fP must run as a
process without root privileges, then just do not use this setting.
.TP
.B
\fB\-L\fP, \fB\-\-listening\-ip\fP
Listener IP address of relay server.
Multiple listeners can be specified, for example:
\fB\-L\fP ip1 \fB\-L\fP ip2 \fB\-L\fP ip3
If no \fBIP\fP(s) specified, then all IPv4 and
IPv6 system IPs will be used for listening.
The same \fBip\fP(s) can be used as both listening and relay \fBip\fP(s).
.TP
.B
\fB\-p\fP, \fB\-\-listening\-port\fP
TURN listener port for UDP and TCP listeners (Default: 3478).
Note: actually, TLS & DTLS sessions can connect to the "plain" TCP & UDP
\fBport\fP(s), too \- if allowed by configuration.
.TP
.B
\fB\-\-tls\-listening\-port\fP
TURN listener port for TLS and DTLS listeners (Default: 5349).
Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS
\fBport\fP(s), too \- if allowed by configuration. The TURN server
"automatically" recognizes the type of traffic. Actually, two listening
endpoints (the "plain" one and the "tls" one) are equivalent in terms of
functionality; but we keep both endpoints to satisfy the RFC 5766 specs.
For secure TCP connections, we currently TLS versions 1.2, 1.3
For secure UDP connections, we support DTLS version 1.
.TP
.B
\fB\-\-alt\-listening\-port\fP
Alternative listening port for UDP and TCP listeners;
default (or zero) value means "listening port plus one".
This is needed for STUN CHANGE_REQUEST \- in RFC 5780 sense
or in old RFC 3489 sense \- for NAT behavior discovery). The \fBTURN Server\fP
supports CHANGE_REQUEST only if it is started with more than one
listening IP address of the same family (IPv4 or IPv6). The CHANGE_REQUEST
is only supported by UDP protocol, other protocols are listening
on that endpoint only for "symmetry".
.TP
.B
\fB\-\-alt\-tls\-listening\-port\fP
Alternative listening port for TLS and DTLS protocols.
Default (or zero) value means "TLS listening port plus one".
.TP
.B
\fB\-\-tcp\-proxy\-port\fP
Support connections from TCP loadbalancer on this port. The loadbalancer
should use the binary proxy protocol.
(https://www.haproxy.org/download/1.8/doc/proxy\-protocol.txt)
.TP
.B
\fB\-\-aux\-server\fP
Auxiliary STUN/TURN server listening endpoint.
Aux servers have almost full TURN and STUN functionality.
The (minor) limitations are:
.RS
.IP 1) 4
Auxiliary servers do not have alternative ports and
they do not support STUN RFC 5780 functionality (CHANGE REQUEST).
.IP 2) 4
Auxiliary servers also are never returning ALTERNATIVE\-SERVER reply.
.RE
.PP
Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6.
There may be multiple aux\-server \fIoptions\fP, each will be used for listening
to client requests.
.TP
.B
\fB\-i\fP, \fB\-\-relay\-device\fP
Relay interface device for relay sockets
(NOT RECOMMENDED. Optional, Linux only).
.TP
.B
\fB\-E\fP, \fB\-\-relay\-ip\fP
Relay address (the local IP address that
will be used to relay the packets to the
peer). Multiple relay addresses may be used:
\fB\-E\fP ip1 \fB\-E\fP ip2 \fB\-E\fP ip3
The same \fBIP\fP(s) can be used as both listening \fBIP\fP(s) and relay \fBIP\fP(s).
If no relay \fBIP\fP(s) specified, then the \fIturnserver\fP will apply the
default policy: it will decide itself which relay addresses to be
used, and it will always be using the client socket IP address as
the relay IP address of the TURN session (if the requested relay
address family is the same as the family of the client socket).
.TP
.B
\fB\-X\fP, \fB\-\-external\-ip\fP
\fBTURN Server\fP public/private address mapping, if the server is behind NAT.
In that situation, if a \fB\-X\fP is used in form "\fB\-X\fP <ip>" then that ip will be reported
as relay IP address of all allocations. This scenario works only in a simple case
when one single relay address is be used, and no CHANGE_REQUEST functionality is
required. That single relay address must be mapped by NAT to the 'external' IP.
The "external\-ip" value, if not empty, is returned in XOR\-RELAYED\-ADDRESS field.
For that 'external' IP, NAT must forward ports directly (relayed port 12345
must be always mapped to the same 'external' port 12345).
In more complex case when more than one IP address is involved,
that option must be used several times, each entry must
have form "\fB\-X\fP <public\-ip/private\-ip>", to map all involved addresses.
CHANGE_REQUEST (RFC5780 or RFC3489) NAT discovery STUN functionality will work
correctly, if the addresses are mapped properly, even when the TURN server itself
is behind A NAT.
By default, this value is empty, and no address mapping is used.
.TP
.B
\fB\-m\fP, \fB\-\-relay\-threads\fP
Number of the relay threads to handle the established connections
(in addition to authentication thread and the listener thread).
If explicitly set to 0 then application runs relay process in a single thread,
in the same thread with the listener process (the authentication thread will
still be a separate thread). If not set, then a default optimal algorithm
will be employed (OS\-dependent). In the older Linux systems
(before Linux kernel 3.9), the number of UDP threads is always one threads
per network listening endpoint \- unless "\fB\-m\fP 0" or "\fB\-m\fP 1" is set.
.TP
.B
\fB\-\-cpus\fP
Override system CPU count detection. Use this number instead of the
auto\-detected CPU count. Useful in virtualized/containerized environments
where the system reports the host CPU count instead of the allocated
container CPUs. This affects the default number of relay threads when
\fB\-\-relay\-threads\fP is not explicitly specified.
.TP
.B
\fB\-\-min\-port\fP
Lower bound of the UDP port range for relay
endpoints allocation.
Default value is 49152, according to RFC 5766.
.TP
.B
\fB\-\-max\-port\fP
Upper bound of the UDP port range for relay
endpoints allocation.
Default value is 65535, according to RFC 5766.
.TP
.B
\fB\-u\fP, \fB\-\-user\fP
Long\-term security mechanism credentials user account,
in the column\-separated form username:key.
Multiple user accounts may be used in the command line.
The key is either the user password, or
the key is generated
by \fIturnadmin\fP command. In the second case,
the key must be prepended with 0x symbols.
The key is calculated over the user name,
the user realm, and the user password.
This setting may not be used with TURN REST API.
.TP
.B
\fB\-r\fP, \fB\-\-realm\fP
The default realm to be used for the users when no explicit
origin/realm relationship was found in the database, or if the TURN
server is not using any database (just the commands\-line settings
and the userdb file). Must be used with long\-term credentials
mechanism or with TURN REST API.
.TP
.B
\fB\-C\fP, \fB\-\-rest\-api\-separator\fP
This is the timestamp/username separator symbol
(character) in TURN REST API. The default value is :.
.TP
.B
\fB\-q\fP, \fB\-\-user\-quota\fP
Per\-user allocations quota: how many concurrent
allocations a user can create. This option can also be set
through the database, for a particular realm.
.TP
.B
\fB\-Q\fP, \fB\-\-total\-quota\fP
Total allocations quota: global limit on concurrent allocations.
This option can also be set through the database, for a particular realm.
.TP
.B
\fB\-s\fP, \fB\-\-max\-bps\fP
Max bytes\-per\-second bandwidth a TURN session is allowed to handle
(input and output network streams are treated separately). Anything above
that limit will be dropped or temporary suppressed (within the
available buffer limits). This option can also be set through the
database, for a particular realm.
.TP
.B
\fB\-B\fP, \fB\-\-bps\-capacity\fP
Maximum server capacity.
Total bytes\-per\-second bandwidth the TURN server is allowed to allocate
for the sessions, combined (input and output network streams are treated
separately).
.TP
.B
\fB\-\-static\-auth\-secret\fP
Static authentication secret value (a string) for TURN REST API only.
If not set, then the turn server will try to use the dynamic value
in turn_secret table in user database (if present). The database\-stored
value can be changed on\-the\-fly by a separate program, so this is why
that other mode is dynamic. Multiple shared secrets can be used
(both in the database and in the "static" fashion).
.RS
.TP
.B
\fB\-\-no\-auth\-pings\fP
Disable periodic health checks to 'dynamic' auth secret tables.
.TP
.B
\fB\-\-no\-dynamic\-ip\-list\fP
Do not use dynamic allowed/denied peer ip list.
.TP
.B
\fB\-\-no\-dynamic\-realms\fP
Do not use dynamic realm assignment and \fIoptions\fP.
.RE
.TP
.B
\fB\-\-server\-name\fP
Server name used for
the oAuth authentication purposes.
The default value is the realm name.
.TP
.B
\fB\-\-cert\fP
Certificate file, PEM format. Same file
search rules applied as for the configuration
file. If both \fB\-\-no\-tls\fP and \fB\-\-no\-dtls\fP \fIoptions\fP
are specified, then this parameter is not needed.
Default value is turn_server_cert.pem.
.TP
.B
\fB\-\-pkey\fP
Private key file, PEM format. Same file
search rules applied as for the configuration
file. If both \fB\-\-no\-tls\fP and \fB\-\-no\-dtls\fP \fIoptions\fP
are specified, then this parameter is not needed.
Default value is turn_server_pkey.pem.
.TP
.B
\fB\-\-pkey\-pwd\fP
If the private key file is encrypted, then this password to be used.
.TP
.B
\fB\-\-cipher\-list\fP
Allowed OpenSSL cipher list for TLS/DTLS connections.
Default value is "DEFAULT" for TLS/DTLS versions up to TLSv1.2/DTLSv1.2,
and the library default ciphersuites for TLSv1.3.
.TP
.B
\fB\-\-CA\-file\fP
CA file in OpenSSL format.
Forces TURN server to verify the client SSL certificates.
By default, no CA is set and no client certificate check is performed.
.TP
.B
\fB\-\-ec\-curve\-name\fP
Curve name for EC ciphers, if supported by OpenSSL
library (TLS and DTLS). The default value is prime256v1,
.TP
.B
\fB\-\-dh\-file\fP
Use custom DH TLS key, stored in PEM format in the file.
Flags \fB\-\-dh566\fP and \fB\-\-dh1066\fP are ignored when the DH key is taken from a file.
.TP
.B
\fB\-l\fP, \fB\-\-log\-file\fP
Option to set the full path name of the log file.
By default, the \fIturnserver\fP tries to open a log file in
/var/log/\fIturnserver\fP, /var/log, /var/tmp, /tmp and . (current)
directories (which file open operation succeeds
first that file will be used). With this option you can set the
definite log file name.
The special names are "stdout" and "\-" \- they will force everything
to the stdout. Also, "syslog" name will redirect everything into
the system log (syslog), as if the option "\fB\-\-syslog\fP" was set.
In the runtime, the logfile can be reset with the SIGHUP signal
to the \fIturnserver\fP process.
.TP
.B
\fB\-\-alternate\-server\fP
Option to set the "redirection" mode. The value of this option
will be the address of the alternate server for UDP & TCP service in form of
<ip>[:<port>]. The server will send this value in the attribute
ALTERNATE\-SERVER, with error 300, on ALLOCATE request, to the client.
Client will receive only values with the same address family
as the client network endpoint address family.
See RFC 5389 and RFC 5766 for ALTERNATE\-SERVER functionality description.
The client must use the obtained value for subsequent TURN communications.
If more than one \fB\-\-alternate\-server\fP \fIoptions\fP are provided, then the functionality
can be more accurately described as "load\-balancing" than a mere "redirection".
If the port number is omitted, then the default port
number 3478 for the UDP/TCP protocols will be used.
Colon (:) characters in IPv6 addresses may conflict with the syntax of
the option. To alleviate this conflict, literal IPv6 addresses are enclosed
in square brackets in such resource identifiers, for example:
[2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 .
Multiple alternate servers can be set. They will be used in the
round\-robin manner. All servers in the pool are considered of equal weight and
the load will be distributed equally. For example, if we have 4 alternate servers,
then each server will receive 25% of ALLOCATE requests. An alternate TURN server
address can be used more than one time with the alternate\-server option, so this
can emulate "weighting" of the servers.
.TP
.B
\fB\-\-tls\-alternate\-server\fP
Option to set alternative server for TLS & DTLS services in form of
<ip>:<port>. If the port number is omitted, then the default port
number 5349 for the TLS/DTLS protocols will be used. See the
previous option for the functionality description.
.TP
.B
\fB\-O\fP, \fB\-\-redis\-statsdb\fP
Redis status and statistics database connection string, if used (default \- empty,
no Redis stats DB used). This database keeps allocations status information, and it can
be also used for publishing and delivering traffic and allocation event notifications.
This database option can be used independently of \fB\-\-redis\-userdb\fP option,
and actually Redis can be used for status/statistics and SQLite or MySQL or MongoDB or
PostgreSQL can be used for the user database.
The connection string has the same parameters as redis\-userdb connection string.
.TP
.B
\fB\-\-max\-allocate\-timeout\fP
Max time, in seconds, allowed for full allocation establishment.
Default is 60 seconds.
.PP
\fB\-\-denied\-peer\-ip\fP=<IPaddr[\fB\-IPaddr\fP]>
.PP
\fB\-\-allowed\-peer\-ip\fP=<IPaddr[\fB\-IPaddr\fP]> Options to ban or allow specific ip addresses or ranges
of ip addresses. If an ip address is specified as both allowed and denied, then
the ip address is considered to be allowed. This is useful when you wish to ban
a range of ip addresses, except for a few specific ips within that range.
This can be used when you do not want users of the turn server to be able to access
machines reachable by the turn server, but would otherwise be unreachable from the
internet (e.g. when the turn server is sitting behind a NAT). The 'white" and "black" peer
IP ranges can also be dynamically changed in the database.
The allowed/denied addresses (white/black lists) rules are very simple:
.RS
.IP 1) 4
If there is no rule for an address, then it is allowed;
.IP 2) 4
If there is an "allowed" rule that fits the address then it is allowed \- no matter what;
.IP 3) 4
If there is no "allowed" rule that fits the address, and if there is a "denied" rule that
fits the address, then it is denied.
.RE
.TP
.B
\fB\-\-pidfile\fP
File name to store the pid of the process.
Default is /var/run/turnserver.pid (if superuser account is used) or
/var/tmp/turnserver.pid .
.TP
.B
\fB\-\-acme\-redirect\fP
<URL>  Redirect ACME/RFC8555 (like Let's Encrypt challenge) requests, i.e.
HTTP GET requests matching '^/.well\-known/acme\-challenge/(.*)'
to <URL>$1 with $1 == (.*). No validation of <URL> will be done,
so make sure you do not forget the trailing slash. If <URL> is an empty
string (the default value), no special handling of such requests will be done.
.TP
.B
\fB\-\-proc\-user\fP
User name to run the process. After the initialization, the \fIturnserver\fP process
will make an attempt to change the current user ID to that user.
.TP
.B
\fB\-\-proc\-group\fP
Group name to run the process. After the initialization, the \fIturnserver\fP process
will make an attempt to change the current group ID to that group.
.TP
.B
\fB\-K\fP, \fB\-\-keep\-address\-family\fP
Deprecated and will be removed in favor of \fB\-\-allocation\-default\-address\-family\fP!!
TURN server allocates address family according TURN
Client <=> Server communication address family.
!! It breaks RFC6156 section\-4.2 (violates default IPv4) !!
.TP
.B
\fB\-A\fP \fB\-\-allocation\-default\-address\-family\fP=<ipv4|ipv6|keep>
Default is IPv4
TURN server allocates address family according TURN client requested address family.
If address family not requested explicitly by the client, then it falls back to this default.
The standard RFC explicitly define that this default must be IPv4, 
so use other option values with care!
.TP
.B
\fB\-\-cli\-ip\fP
Local system IP address to be used for CLI management interface.
The \fIturnserver\fP process can be accessed for management with telnet,
at this IP address and on the CLI port (see the next parameter).
Default value is 127.0.0.1. You can use telnet or putty (in telnet mode)
to access the CLI management interface.
.TP
.B
\fB\-\-cli\-port\fP
CLI management interface listening port. Default is 5766.
.TP
.B
\fB\-\-cli\-password\fP
CLI access password. Default is empty (no password).
For the security reasons, it is recommended to use the encrypted
form of the password (see the \fB\-P\fP command in the \fIturnadmin\fP
utility). The dollar signs in the encrypted form must be escaped.
.TP
.B
\fB\-\-cli\-max\-output\-sessions\fP
Maximum number of output sessions in ps CLI command.
This value can be changed on\-the\-fly in CLI. The default value is 256.
.TP
.B
\fB\-\-web\-admin\fP
Enable Turn Web\-admin support. By default it is disabled.
.TP
.B
\fB\-\-web\-admin\-ip\fP=<IP>
Local system IP address to be used for Web\-admin server endpoint. Default value is 127.0.0.1.
.TP
.B
\fB\-\-web\-admin\-port\fP=<port>
Web\-admin server port. Default is 8080.
.TP
.B
\fB\-\-web\-admin\-listen\-on\-workers\fP
Enable for web\-admin server to listens on STUN/TURN workers STUN/TURN ports.
By default it is disabled for security reasons!
(This behavior used to be the default behavior, and was enabled by default.)
.TP
.B
\fB\-\-ne\fP=[1|2|3]
Set network engine type for the process (for internal purposes).
.TP
.B
\fB\-\-rfc5780\fP
Enable RFC5780 (NAT behavior discovery).
Originally, if there are more than one listener address from the same
address family, then by default the NAT behavior discovery feature enabled.
This option enables this original behavior (NAT behavior discovery) and
adds attributes to response, and this increase the possibility of an amplification attack).
Strongly encouraged to keep this option off to decrease gain factor in STUN binding responses.
.TP
.B
\fB\-\-no\-stun\-backward\-compatibility\fP
Disable handling old STUN Binding requests and disable MAPPED\-ADDRESS attribute in binding response (use only the XOR\-MAPPED\-ADDRESS).
.TP
.B
\fB\-\-response\-origin\-only\-with\-rfc5780\fP
Only send RESPONSE\-ORIGIN attribute in binding response if RFC5780 is enabled.
.RE
.PP

.SH ==================================

.SH LOAD BALANCE AND PERFORMANCE TUNING

This topic is covered in the wiki page:
.PP
https://github.com/coturn/coturn/wiki/turn_performance_and_load_balance
.SH ===================================

.SH WEBRTC USAGE

This is a set of notes for the WebRTC users:
.IP 1) 4
WebRTC uses long\-term authentication mechanism, so you have to use \fB\-a\fP
option (or \fB\-\-lt\-cred\-mech\fP). WebRTC relaying will not work with anonymous
access. With \fB\-a\fP option, do not forget to set the
default realm (\fB\-r\fP option). You will also have to set up the user accounts,
for that you have a number of \fIoptions\fP:
.PP
.nf
.fam C
        a) command\-line options (\-u).

        b) a database table (SQLite or PostgreSQL or MySQL or MongoDB). You will have to
        set keys with turnadmin utility (see docs and wiki for turnadmin).
        You cannot use open passwords in the database.

        c) Redis key/value pair(s), if Redis is used. You key use either keys or
        open passwords with Redis; see turndb/testredisdbsetup.sh file.

        d) You also can use the TURN REST API. You will need shared secret(s) set
        either  through the command line option, or through the config file, or through
        the database table or Redis key/value pairs.

.fam T
.fi
.IP 2) 4
Usually WebRTC uses fingerprinting (\fB\-f\fP).
.IP 3) 4
\fB\-v\fP option may be nice to see the connected clients.
.IP 4) 4
\fB\-X\fP is needed if you are running your TURN server behind a NAT.
.IP 5) 4
\fB\-\-min\-port\fP and \fB\-\-max\-port\fP may be needed if you want to limit the relay endpoints ports
number range.
.SH ===================================

.SH TURN REST API

In WebRTC, the browser obtains the TURN connection information from the web
server. This information is a secure information \- because it contains the
necessary TURN credentials. As these credentials are transmitted over the
public networks, we have a potential security breach.
.PP
If we have to transmit a valuable information over the public network,
then this information has to have a limited lifetime. Then the guy who
obtains this information without permission will be able to perform
only limited damage.
.PP
This is how the idea of TURN REST API \- time\-limited TURN credentials \-
appeared. This security mechanism is based upon the long\-term credentials
mechanism. The main idea of the REST API is that the web server provides
the credentials to the client, but those credentials can be used only
limited time by an application that has to create a TURN server connection.
.PP
The "classic" long\-term credentials mechanism (LTCM) is described here:
.PP
http://tools.ietf.org/html/rfc5389#section\-10.2
.PP
http://tools.ietf.org/html/rfc5389#section\-15.4
.PP
For authentication, each user must know two things: the username and the
password. Optionally, the user must supply the ORIGIN value, so that the
server can figure out the realm to be used for the user. The nonce and
the realm values are supplied by the TURN server. But LTCM is not saying
anything about the nature and about the persistence of the username and
of the password; and this is used by the REST API.
.PP
In the TURN REST API, there is no persistent passwords for users. A user has
just the username. The password is always temporary, and it is generated by
the web server on\-demand, when the user accesses the WebRTC page. And,
actually, a temporary one\-time session only, username is provided to the user,
too.
.PP
The temporary user is generated as:
.PP
temporary\-username="timestamp" + ":" + "username"
.PP
where username is the persistent user name, and the timestamp format is just
seconds since 1970 \- the same value as \fBtime\fP(NULL) function returns.
.PP
The temporary password is obtained as HMAC\-SHA1 function over the temporary
username, with shared secret as the HMAC key, and then the result is encoded:
.PP
temporary\-password = \fBbase64_encode\fP(hmac\-sha1(shared\-secret, temporary\-username))
.PP
Both the TURN server and the web server know the same shared secret. How the
shared secret is distributed among the involved entities is left to the WebRTC
deployment details \- this is beyond the scope of the TURN REST API.
.PP
So, a timestamp is used for the temporary password calculation, and this
timestamp can be retrieved from the temporary username. This information
is valuable, but only temporary, while the timestamp is not expired. Without
knowledge of the shared secret, a new temporary password cannot be generated.
.PP
This is all formally described in Justin's Uberti TURN REST API document
that can be obtained following the link "TURN REST API" in the \fBTURN Server\fP
project's page https://github.com/coturn/coturn/.
.PP
Once the temporary username and password are obtained by the client (browser)
application, then the rest is just 'classic" long\-term credentials mechanism.
For developers, we are going to describe it step\-by\-step below:
.RS
.IP \(bu 3
a new TURN client sends a request command to the TURN server. Optionally,
it adds the ORIGIN field to it.
.IP \(bu 3
TURN server sees that this is a new client and the message is not
authenticated.
.IP \(bu 3
the TURN server generates a random nonce string, and return the
error 401 to the client, with nonce and realm included. If the ORIGIN
field was present in the client request, it may affect the realm value
that the server chooses for the client.
.IP \(bu 3
the client sees the 401 error and it extracts two values from
the error response: the nonce and the realm.
.IP \(bu 3
the client uses username, realm and password to produce a key:
.PP
.nf
.fam C
         key = MD5(username ":" realm ":" SASLprep(password))
.fam T
.fi
(SASLprep is described here: http://tools.ietf.org/html/rfc4013)
.IP \(bu 3
the client forms a new request, adds username, realm and nonce to the
request. Then, the client calculates and adds the integrity field to
the request. This is the trickiest part of the process, and it is
described in the end of section 15.4:
http://tools.ietf.org/html/rfc5389#section\-15.4
.IP \(bu 3
the client, optionally, adds the fingerprint field. This may be also
a tricky procedure, described in section 15.5 of the same document.
WebRTC usually uses fingerprinted TURN messages.
.IP \(bu 3
the TURN server receives the request, reads the username.
.IP \(bu 3
then the TURN server checks that the nonce and the realm in the request
are the valid ones.
.IP \(bu 3
then the TURN server calculates the key.
.IP \(bu 3
then the TURN server calculates the integrity field.
.IP \(bu 3
then the TURN server compares the calculated integrity field with the
received one \- they must be the same. If the integrity fields differ,
then the request is rejected.
.RE
.PP
In subsequent communications, the client may go with exactly the same
sequence, but for optimization usually the client, having already
information about realm and nonce, pre\-calculates the integrity string
for each request, so that the 401 error response becomes unnecessary.
The TURN server may use "\fB\-\-stale\-nonce\fP" option for extra security: in
some time, the nonce expires and the client will obtain 438 error response
with the new nonce, and the client will have to start using the new nonce.
.PP
In subsequent communications, the server and the client will always assume
the same password \- the original password becomes the session parameter and
is never expiring. So the password is not changing while the session is valid
and unexpired. So, if the session is properly maintained, it may go forever,
even if the user password has been already changed (in the database). The
session simply is using the old password. Once the session got disconnected,
the client will have to use the new password to re\-connect (if the password
has been changed).
.PP
An example when a new shared secret is generated every hour by the TURN server
box and then supplied to the web server, remotely, is provided in the script
examples/scripts/restapi/shared_secret_maintainer.pl .
.PP
A very important thing is that the nonce must be totally random and it must be
different for different clients and different sessions.
.SH ===================================

.SH DATABASES

For the user database, the \fIturnserver\fP has the following \fIoptions\fP:
.IP 1) 4
Users can be set in the command line, with multiple \fB\-u\fP or \fB\-\-user\fP \fIoptions\fP.
Obviously, only a few users can be set that way, and their credentials are fixed
for the \fIturnserver\fP process lifetime.
.IP 2) 4
Users can be stored in SQLite DB. The default SQLite database file is /var/db/turndb
or /usr/local/var/db/turndb or /var/lib/turn/turndb.
.IP 3) 4
Users can be stored in PostgreSQL database, if the \fIturnserver\fP was compiled with PostgreSQL
support. Each time \fIturnserver\fP checks user credentials, it reads the database (asynchronously,
of course, so that the current flow of packets is not delayed in any way), so any change in the
database content is immediately visible by the \fIturnserver\fP. This is the way if you need the
best scalability. The schema for the database can be found in schema.sql file.
For long\-term credentials, you have to set the "keys" for the users; the "keys" are generated
by the \fIturnadmin\fP utility. For the key generation, you need username, password and the realm.
All users in the database must use the same realm value; if down the road you will decide
to change the realm name, then you will have to re\-generate all user keys (that can be done
in a batch script). See the file turndb/testsqldbsetup.sql as an example.
.IP 4) 4
The same is true for MySQL database. The same schema file is applicable.
The same considerations are applicable.
.IP 5) 4
The same is true for the Redis database, but the Redis database has a different schema \-
it can be found (in the form of explanation) in schema.userdb.redis.
Also, in Redis you can store both "keys" and open passwords (for long term credentials) \-
the "open password" option is less secure but more convenient for low\-security environments.
See the file turndb/testredisdbsetup.sh as an example.
.IP 6) 4
If a database is used, then users can be divided into multiple independent realms. Each realm
can be administered separately, and each realm can have its own set of users and its own
performance \fIoptions\fP (max\-bps, user\-quota, total\-quota).
.IP 7) 4
If you use MongoDB, the database will be setup for you automatically.
.IP 8) 4
Of course, the \fIturnserver\fP can be used in non\-secure mode, when users are allowed to establish
sessions anonymously. But in most cases (like WebRTC) that will not work.
.PP
For the status and statistics database, there are two choices:
.IP 1) 4
The simplest choice is not to use it. Do not set \fB\-\-redis\-statsdb\fP option, and this functionality
will be simply ignored.
.IP 2) 4
If you choose to use it, then set the \fB\-\-redis\-statsdb\fP option. This may be the same database
as in \fB\-\-redis\-userdb\fP option, or it may be a different database. You may want to use different
database for security or convenience reasons. Also, you can use different database management
systems for the user database and for the ststus and statistics database. For example, you can use
MySQL as the user database, and you can use redis for the statistics. Or you can use Redis for both.
.PP
So, we have 6 choices for the user management, and 2 choices for the statistics management. These
two are totally independent. So, you have overall 6*2=12 ways to handle persistent information,
choose any for your convenience.
.PP
You do not have to handle the database information "manually" \- the \fIturnadmin\fP program can handle
everything for you. For PostgreSQL and MySQL you will just have to create an empty database
with schema.sql SQL script. With Redis, you do not have to do even that \- just run \fIturnadmin\fP and
it will set the users for you (see the \fIturnadmin\fP manuals). If you are using SQLite, then the
\fIturnserver\fP or \fIturnadmin\fP will initialize the empty database, for you, when started. The
TURN server installation process creates an empty initialized SQLite database in the default
location (/var/db/turndb or /usr/local/var/db/turndb or /var/lib/turn/turndb, depending on the system).
.SH =================================

.SH ALPN

The server supports ALPNs "stun.turn" and "stun.nat\-discovery". If the server
receives a TLS/DTLS ClientHello message that contains one or both of those ALPNs,
then the server chooses the first stun.* label and sends it back (in the ServerHello)
in the ALPN extension field. If no stun.* label is found, then the server
does not include the ALPN information into the ServerHello.
.SH =================================

.SH LIBRARIES

In the lib/ sub\-directory the build process will create TURN client messaging library.
In the include/ sub\-directory, the necessary include files will be placed.
The C++ wrapper for the messaging functionality is located in TurnMsgLib.h header.
An example of C++ code can be found in stunclient.c file.
.SH =================================

.SH DOCS

After installation, run the command:
.PP
$ man \fIturnserver\fP
.PP
or in the project root directory:
.PP
$ man \fB\-M\fP man \fIturnserver\fP
.PP
to see the man page.
.PP
In the docs/html subdirectory of the original archive tree, you will find the client library
reference. After the installation, it will be placed in PREFIX/share/doc/\fIturnserver\fP/html.
.SH =================================

.SH LOGS

When the \fBTURN Server\fP starts, it makes efforts to create a log file turn_<pid>.log
in the following directories:
.RS
.IP \(bu 3
/var/log
.IP \(bu 3
/log/
.IP \(bu 3
/var/tmp
.IP \(bu 3
/tmp
.IP \(bu 3
current directory
.RE
.PP
If all efforts failed (due to the system permission settings) then all
log messages are sent only to the standard output of the process.
.PP
This behavior can be controlled by \fB\-\-log\-file\fP, \fB\-\-syslog\fP and \fB\-\-no\-stdout\-log\fP
\fIoptions\fP.
.SH =================================

.SH HTTPS MANAGEMENT INTERFACE

The \fIturnserver\fP process provides an HTTPS Web access as statistics and basic
management interface. The \fIturnserver\fP listens to incoming HTTPS admin
connections on the same ports as the main TURN/STUN listener. The Web admin
pages are basic and self\-explanatory.
.PP
To make the HTTPS interface active, the database table admin_user must be
populated with the admin user \fBaccount\fP(s). An admin user can be a superuser
(if not assigned to a particular realm) or a restricted user (if assigned to
a realm). The restricted admin users can perform only limited actions, within
their corresponding realms.
.SH =================================

.SH TELNET CLI

The \fIturnserver\fP process provides a telnet CLI access as statistics and basic management
interface. By default, the \fIturnserver\fP starts a telnet CLI listener on IP 127.0.0.1 and
port 5766. That can be changed by the command\-cline \fIoptions\fP of the \fIturnserver\fP process
(see \fB\-\-cli\-ip\fP and \fB\-\-cli\-port\fP \fIoptions\fP). The full list of telnet CLI commands is provided
in "help" command output in the telnet CLI.
.SH =================================

.SH CLUSTERS

\fBTURN Server\fP can be a part of the cluster installation. But, to support the "even port" functionality
(RTP/RTCP streams pairs) the client requests from a particular IP must be delivered to the same
\fBTURN Server\fP instance, so it requires some networking setup massaging for the cluster. The reason is that
the RTP and RTCP relaying endpoints must be allocated on the same relay IP. It would be possible
to design a scheme with the application\-level requests forwarding (and we may do that later) but
it would affect the performance.
.SH =================================

.SH FILES

/etc/turnserver.conf
.PP
/var/db/turndb
.PP
/usr/local/var/db/turndb
.PP
/var/lib/turn/turndb
.PP
/usr/local/etc/turnserver.conf
.SH =================================

.SH DIRECTORIES

/usr/local/share/\fIturnserver\fP
.PP
/usr/local/share/doc/\fIturnserver\fP
.PP
/usr/local/share/examples/\fIturnserver\fP
.SH =================================

.SH STANDARDS

obsolete STUN RFC 3489
.PP
new STUN RFC 5389
.SH TURN RFC 5766

TURN\-TCP extension RFC 6062
.PP
TURN IPv6 extension RFC 6156
.PP
STUN/TURN test vectors RFC 5769
.PP
STUN NAT behavior discovery RFC 5780
.SH =================================

.SH SEE ALSO

\fIturnadmin\fP, \fIturnutils\fP
.SH ======================================

.SS  WEB RESOURCES

project page:
.PP
https://github.com/coturn/coturn/
.PP
Wiki page:
.PP
https://github.com/coturn/coturn/wiki
.PP
forum:
.PP
https://groups.google.com/forum/?fromgroups=#!forum/turn\-server\-project\-rfc5766\-turn\-server
.SH ======================================

.SS  AUTHORS

See the AUTHORS.md file in the coturn source distribution.