nextcloud-docs/influxdb/content.md

What is InfluxDB?

InfluxDB is the time series data platform designed to handle high write and query workloads. Using InfluxDB, you can collect, store, and process large amounts of timestamped data, including metrics and events for use cases such as DevOps monitoring, application metrics, IoT sensors, and event monitoring.

Use the InfluxDB Docker Hub image to write, query, and process time series data in InfluxDB v2 or InfluxDB v1.

For more information, visit https://influxdata.com.

%%LOGO%%

How to use this image for InfluxDB v2

Quick start: See the guide to Install InfluxDB v2 for Docker and get started using InfluxDB v2.

Start InfluxDB v2 and set up with the UI, CLI, or API

To start an InfluxDB v2 container, enter the following command:

docker run \
    -p 8086:8086 \
    -v "$PWD/data:/var/lib/influxdb2" \
    -v "$PWD/config:/etc/influxdb2" \
    %%IMAGE%%:2

Replace the following with your own values:

• $PWD/data: A host directory to mount at the container's InfluxDB data directory path
• $PWD/config: A host directory to mount at the container's InfluxDB configuration directory path

After the container starts, the InfluxDB UI and API are accessible at http://localhost:8086 on the host. You're ready to set up an initial admin user, token, and bucket from outside or inside the container--choose one of the following:

• Set up InfluxDB from outside the container: Set up InfluxDB from the host or network using the InfluxDB UI, influx CLI, or HTTP API.

• Set up InfluxDB from inside the container: Use docker exec to run the influx CLI installed in the container--for example:

  docker exec influxdb2 influx setup \
    --username $USERNAME \
    --password $PASSWORD \
    --org $ORGANIZATION \
    --bucket $BUCKET \
    --force
  

See the influx setup documentation for the full list of options.

If you run setup from within the container, InfluxDB stores influx CLI connection configurations in the container's /etc/influxdb2/influx-configs file.

Start InfluxDB v2 with automated setup

To start and set up InfluxDB v2 with a single command, specify -e DOCKER_INFLUXDB_INIT_MODE=setup and -e DOCKER_INFLUXDB_INIT_ environment variables for the initial user, password, bucket, and organization--for example:

docker run -d -p 8086:8086 \
  -v "$PWD/data:/var/lib/influxdb2" \
  -v "$PWD/config:/etc/influxdb2" \
  -e DOCKER_INFLUXDB_INIT_MODE=setup \
  -e DOCKER_INFLUXDB_INIT_USERNAME=<USERNAME> \
  -e DOCKER_INFLUXDB_INIT_PASSWORD=<PASSWORD> \
  -e DOCKER_INFLUXDB_INIT_ORG=<ORG_NAME> \
  -e DOCKER_INFLUXDB_INIT_BUCKET=<BUCKET_NAME> \
  %%IMAGE%%:2

Replace the following with your own values:

• $PWD/data: A host directory to mount at the container's InfluxDB data directory path
• $PWD/config: A host directory to mount at the container's InfluxDB configuration directory path
• <USERNAME>: A name for your initial admin user
• <PASSWORD>: A password for your initial admin user
• <ORG_NAME>: A name for your initial organization
• <BUCKET_NAME>: A name for your initial bucket (database)

If you run setup from within the container, InfluxDB stores influx CLI connection configurations in the container's /etc/influxdb2/influx-configs file.

Automated setup options

In setup mode (DOCKER_INFLUXDB_INIT_MODE=setup) or upgrade mode (DOCKER_INFLUXDB_INIT_MODE=upgrade), you can specify the following Docker-specific environment variables to provide initial setup values:

• DOCKER_INFLUXDB_INIT_USERNAME: A name for your initial admin user.
• DOCKER_INFLUXDB_INIT_PASSWORD: A password for your initial admin user.
• DOCKER_INFLUXDB_INIT_ORG: A name for your initial organization.
• DOCKER_INFLUXDB_INIT_BUCKET: A name for your initial bucket.
• Optional: DOCKER_INFLUXDB_INIT_RETENTION: A duration to use as the initial bucket's retention period. Default: 0 (infinite; doesn't delete data).
• Optional: DOCKER_INFLUXDB_INIT_ADMIN_TOKEN: A string value to set for the Operator token. Default: a generated token.

The following example shows how to pass values for all initial setup options:

docker run -d -p 8086:8086 \
    -v "$PWD/data:/var/lib/influxdb2" \
    -v "$PWD/config:/etc/influxdb2" \
    -e DOCKER_INFLUXDB_INIT_MODE=setup \
    -e DOCKER_INFLUXDB_INIT_USERNAME=my-user \
    -e DOCKER_INFLUXDB_INIT_PASSWORD=my-password \
    -e DOCKER_INFLUXDB_INIT_ORG=my-org \
    -e DOCKER_INFLUXDB_INIT_BUCKET=my-bucket \
    -e DOCKER_INFLUXDB_INIT_RETENTION=1w \
    -e DOCKER_INFLUXDB_INIT_ADMIN_TOKEN=my-super-secret-auth-token \
    %%IMAGE%%:2

*To upgrade from InfluxDB 1.x to InfluxDB 2.x, see the Upgrading from InfluxDB 1.x section below.*

With InfluxDB set up and running, see the Get started tutorial to create tokens and write and query data.

Custom Initialization Scripts

In setup mode (DOCKER_INFLUXDB_INIT_MODE=setup) or upgrade mode (DOCKER_INFLUXDB_INIT_MODE=upgrade), the InfluxDB Docker Hub image supports running custom initialization scripts. After the setup process completes, scripts are executed in lexical sort order by name.

For the container to run scripts, they must:

• Be mounted in the container's /docker-entrypoint-initdb.d directory
• Be named using the .sh file name extension

• Be executable by the user running the docker run command--for example, to allow the current use to execute a script with docker run:

  chmod +x ./scripts/<yourscript.sh>
  

Grant permissions to mounted files

By default, Docker runs containers using the user and group IDs of the user executing the docker run command. When files are bind-mounted into the container, Docker preserves the user and group ownership from the host system.

The image exports a number of variables into the environment before executing scripts. The following variables are available for you to use in your scripts:

• INFLUX_CONFIGS_PATH: Path to the influx CLI connection configurations file written by setup/upgrade
• INFLUX_HOST: URL to the influxd instance running setup/upgrade
• DOCKER_INFLUXDB_INIT_USER_ID: ID of the initial admin user created by setup/upgrade
• DOCKER_INFLUXDB_INIT_ORG_ID: ID of the initial organization created by setup/upgrade
• DOCKER_INFLUXDB_INIT_BUCKET_ID: ID of the initial bucket created by setup/upgrade

For example, to grant an InfluxDB 1.x client write permission to your initial bucket, create a $PWD/scripts/setup-v1.sh file that contains the following:

#!/bin/bash
set -e

influx v1 dbrp create \
  --bucket-id ${DOCKER_INFLUXDB_INIT_BUCKET_ID} \
  --db ${V1_DB_NAME} \
  --rp ${V1_RP_NAME} \
  --default \
  --org ${DOCKER_INFLUXDB_INIT_ORG}

influx v1 auth create \
  --username ${V1_AUTH_USERNAME} \
  --password ${V1_AUTH_PASSWORD} \
  --write-bucket ${DOCKER_INFLUXDB_INIT_BUCKET_ID} \
  --org ${DOCKER_INFLUXDB_INIT_ORG}

Then, run the following command to start and set up InfluxDB using custom scripts:

docker run -p 8086:8086 \
     -v "$PWD/data:/var/lib/influxdb2" \
     -v "$PWD/config:/etc/influxdb2" \
     -v "$PWD/scripts:/docker-entrypoint-initdb.d" \
     -e DOCKER_INFLUXDB_INIT_MODE=setup \
     -e DOCKER_INFLUXDB_INIT_USERNAME=my-user \
     -e DOCKER_INFLUXDB_INIT_PASSWORD=my-password \
     -e DOCKER_INFLUXDB_INIT_ORG=my-org \
     -e DOCKER_INFLUXDB_INIT_BUCKET=my-bucket \
     -e V1_DB_NAME=v1-db \
     -e V1_RP_NAME=v1-rp \
     -e V1_AUTH_USERNAME=v1-user \
     -e V1_AUTH_PASSWORD=v1-password \
     %%IMAGE%%:2

Automated setup and upgrade ignored if already setup

Automated setup, upgrade, and custom initialization scripts won't run if an existing influxd.bolt boltdb file from a previous setup is found in the configured data directory.

This behavior allows for the InfluxDB container to reboot post-setup and avoid overwriting migrated data, DB is already set up errors, and errors from non-idempotent script commands.

Access InfluxDB v2 file system and ports

When starting an InfluxDB container, we recommend the following for easy access to your data, configurations, and InfluxDB v2 instance:

• Publish the container's 8086 port to make the InfluxDB UI and HTTP API accessible from the host system.
• Use Docker Volumes or Bind mounts to persist InfluxDB data and configuration directories outside of containers.

Default file system and networking ports

For InfluxDB v2, the InfluxDB Docker Hub image uses the following default ports and file system paths:

• TCP port 8086: the default port for the InfluxDB UI and HTTP API. To specify a different port or address, use the http-bind-address configuration option.

• /var/lib/influxdb2/: the InfluxDB data directory

  • /engine/: Default InfluxDB Storage engine path
  • influxd.bolt: Default Bolt path
  • influxd.sqlite: Default SQLite path

• /etc/influxdb2: the InfluxDB configuration directory

  • /etc/influxdb2/configs: influx CLI connection configurations file
  • /etc/influxdb2/influx-configs: influx CLI connection configurations file, if you run setup from within the container
  • Optional: /etc/influxdb2/config.[yml, json, toml]: Your customized InfluxDB configuration options file

Configure InfluxDB v2 in a container

To customize InfluxDB, specify server configuration options in a configuration file, environment variables, or command line flags.

Use a configuration file

To customize and mount an InfluxDB configuration file, do the following:

1. If you haven't already, set up InfluxDB to initialize an API Operator token. You'll need the Operator token in the next step.

2. Run the influx server-config CLI command to output the current server configuration to a file in the mounted configuration directory--for example, enter the following command to use the container's influx CLI and default Operator token:

   docker exec -it influxdb2 influx server-config > "$PWD/config/config.yml"
   

Replace $PWD/config/ with the host directory that you mounted at the container's /etc/influxdb2 InfluxDB configuration directory path.

1. Edit the config.yml file to customize server configuration options.

2. Restart the container.

   docker restart influxdb2
   

Use environment variables and command line flags

To override specific configuration options, use environment variables or command line flags.

• Pass INFLUXD_ environment variables to Docker to override the configuration file--for example:

  docker run -p 8086:8086 \
  -e INFLUXD_STORAGE_WAL_FSYNC_DELAY=15m \
  influxdb:2 
  

• Pass influxd command line flags to override environment variables and the configuration file--for example:

  docker run -p 8086:8086 \
    %%IMAGE%%:2 --storage-wal-fsync-delay=15m
  

To learn more, see InfluxDB configuration options.

Upgrading from InfluxDB 1.x

InfluxDB 2.x provides a 1.x-compatible API, but expects a different storage layout on disk. To account for these differences, the InfluxDB Docker Hub image provides an upgrade feature that migrates 1.x data and configuration to 2.x before starting the influxd server.

The automated upgrade process creates the following in the InfluxDB v2 container:

• an initial admin user
• an initial organization
• an initial bucket
• InfluxDB v2 data files (the default path is /var/lib/influxdb2)
• InfluxDB v2 configuration files (the default path is /etc/influxdb2)

Mount volumes at both paths to avoid losing data.

To run the automated upgrade, specify the following when you start the container:

• InfluxDB v2 initialization environment variables:

  • DOCKER_INFLUXDB_INIT_MODE=upgrade
  • DOCKER_INFLUXDB_INIT_USERNAME: A name for the initial admin user
  • DOCKER_INFLUXDB_INIT_PASSWORD: A password for the initial admin user
  • DOCKER_INFLUXDB_INIT_ORG: A name for the initial organization
  • DOCKER_INFLUXDB_INIT_BUCKET: A name for the initial bucket
  • Optional: DOCKER_INFLUXDB_INIT_RETENTION: A duration for the bucket retention period. Default: 0 (infinite; doesn't delete data)
  • Optional: DOCKER_INFLUXDB_INIT_ADMIN_TOKEN: A value to set for the Operator token. Default: generates a token.

• 1.x data and configuration paths:

  • A 1.x data volume, specified by the DOCKER_INFLUXDB_INIT_UPGRADE_V1_DIR environment variable or mounted at /var/lib/influxdb
  • Optional: a 1.x custom configuration file, specified by the DOCKER_INFLUXDB_INIT_UPGRADE_V1_CONFIG environment variable or mounted at /etc/influxdb/influxdb.conf

The upgrade process searches for mounted 1.x data and configuration paths in the following order of precedence:

1. A configuration file referenced by the DOCKER_INFLUXDB_INIT_UPGRADE_V1_CONFIG environment variable
2. A data directory referenced by the DOCKER_INFLUXDB_INIT_UPGRADE_V1_DIR environment variable
3. A configuration file mounted at /etc/influxdb/influxdb.conf
4. A data directory mounted at /var/lib/influxdb

Automated setup and upgrade ignored if already setup

Automated setup, upgrade, and custom initialization scripts won't run if an existing influxd.bolt boltdb file from a previous setup is found in the configured data directory.

This behavior allows for the InfluxDB container to reboot post-setup and avoid overwriting migrated data, DB is already set up errors, and errors from non-idempotent script commands.

Upgrade InfluxDB 1.x: default data path and configuration

Assume you've been running a minimal InfluxDB 1.x deployment:

docker run -p 8086:8086 \
    -v influxdb:/var/lib/influxdb \
    %%IMAGE%%:1.8

To upgrade this deployment to InfluxDB 2.x, stop the running InfluxDB 1.x container, and then run the following command:

docker run -p 8086:8086 \
    -v influxdb:/var/lib/influxdb \
    -v influxdb2:/var/lib/influxdb2 \
    -e DOCKER_INFLUXDB_INIT_MODE=upgrade \
    -e DOCKER_INFLUXDB_INIT_USERNAME=my-user \
    -e DOCKER_INFLUXDB_INIT_PASSWORD=my-password \
    -e DOCKER_INFLUXDB_INIT_ORG=my-org \
    -e DOCKER_INFLUXDB_INIT_BUCKET=my-bucket \
    %%IMAGE%%:2

Upgrade InfluxDB 1.x: custom configuration

Assume you've been running an InfluxDB 1.x deployment with customized configuration (/etc/influxdb/influxdb.conf):

docker run -p 8086:8086 \
    -v influxdb:/var/lib/influxdb \
    -v "$PWD/influxdb.conf:/etc/influxdb/influxdb.conf" \
    %%IMAGE%%:1.8

To upgrade this deployment to InfluxDB 2.x, stop the running InfluxDB 1.x container, and then run the following command:

docker run -p 8086:8086 \
    -v influxdb:/var/lib/influxdb \
    -v influxdb2:/var/lib/influxdb2 \
    -v influxdb2-config:/etc/influxdb2 \
    -v "$PWD/influxdb.conf:/etc/influxdb/influxdb.conf" \
    -e DOCKER_INFLUXDB_INIT_MODE=upgrade \
    -e DOCKER_INFLUXDB_INIT_USERNAME=my-user \
    -e DOCKER_INFLUXDB_INIT_PASSWORD=my-password \
    -e DOCKER_INFLUXDB_INIT_ORG=my-org \
    -e DOCKER_INFLUXDB_INIT_BUCKET=my-bucket \
    %%IMAGE%%:2

Upgrade InfluxDB 1.x: custom data and configuration paths

Assume you've been running an InfluxDB 1.x deployment with data and configuration mounted at custom paths:

docker run -p 8086:8086 \
    -v influxdb:/root/influxdb/data \
    -v "$PWD/influxdb.conf:/root/influxdb/influxdb.conf" \
    %%IMAGE%%:1.8 -config /root/influxdb/influxdb.conf

Before you upgrade to InfluxDB v2, decide whether to keep using your custom paths or to use the InfluxDB v2 defaults.

To use InfluxDB v2 defaults, stop the running InfluxDB 1.x container, and then run the following command:

docker run -p 8086:8086 \
    -v influxdb:/root/influxdb/data \
    -v influxdb2:/var/lib/influxdb2 \
    -v influxdb2-config:/etc/influxdb2 \
    -v "$PWD/influxdb.conf:/root/influxdb/influxdb.conf" \
    -e DOCKER_INFLUXDB_INIT_MODE=upgrade \
    -e DOCKER_INFLUXDB_INIT_USERNAME=my-user \
    -e DOCKER_INFLUXDB_INIT_PASSWORD=my-password \
    -e DOCKER_INFLUXDB_INIT_ORG=my-org \
    -e DOCKER_INFLUXDB_INIT_BUCKET=my-bucket \
    -e DOCKER_INFLUXDB_INIT_UPGRADE_V1_CONFIG=/root/influxdb/influxdb.conf \
    %%IMAGE%%:2

To use your custom paths instead of InfluxDB v2 default paths, run the following command:

docker run -p 8086:8086 \
    -v influxdb:/root/influxdb/data \
    -v influxdb2:/root/influxdb2/data \
    -v influxdb2-config:/etc/influxdb2 \
    -v "$PWD/influxdb.conf:/root/influxdb/influxdb.conf" \
    -e DOCKER_INFLUXDB_INIT_MODE=upgrade \
    -e DOCKER_INFLUXDB_INIT_USERNAME=my-user \
    -e DOCKER_INFLUXDB_INIT_PASSWORD=my-password \
    -e DOCKER_INFLUXDB_INIT_ORG=my-org \
    -e DOCKER_INFLUXDB_INIT_BUCKET=my-bucket \
    -e DOCKER_INFLUXDB_INIT_UPGRADE_V1_CONFIG=/root/influxdb/influxdb.conf \
    -e DOCKER_INFLUXDB_CONFIG_PATH=/root/influxdb2/config.toml \
    -e DOCKER_INFLUXDB_BOLT_PATH=/root/influxdb2/influxdb.bolt \
    -e DOCKER_INFLUXDB_ENGINE_PATH=/root/influxdb2/engine \
    %%IMAGE%%:2

To learn more about the upgrade process, see the v1-to-v2 upgrade guide.

Upgrading from quay.io-hosted InfluxDB 2.x image

Early Docker builds of InfluxDB 2.x were hosted at quay.io/influxdb/influxdb and contained the influx and influxd binaries without any default configuration or helper scripts. By default, the influxd process stored data in /root/.influxdbv2.

Starting with v2.0.4, we restored the InfluxDB Docker Hub build, which defaults to storing data in /var/lib/influxdb2. If you upgrade directly from quay.io/influxdb/influxdb to influxdb:2.0.4 using the default settings, InfluxDB won't be able to find your existing data files.

To avoid this problem when migrating from quay.io/influxdb/influxdb to influxdb:2.0, choose one of the following:

Update the mount to use the InfluxDB default

To use the InfluxDB Docker Hub data path, start a container that mounts your data volume into /var/lib/influxdb2--for example, if you used the following command to start the InfluxDB quay.io container:

# quay.io InfluxDB 2.x container 
docker run -p 8086:8086 \
    -v "$PWD:/root/.influxdbv2" \
    quay.io/influxdb/influxdb:v2.0.3

Use this command to start an InfluxDB v2 Docker Hub container:

# Docker Hub InfluxDB 2.x container
docker run -p 8086:8086 \
    -v "$PWD:/var/lib/influxdb2" \
    %%IMAGE%%:2

Configure InfluxDB to use the container home directory

To continue using the /root/.influxdbv2 data path, customize storage path configuration options (bolt-path, engine-path, sqlite-path) configuration options for your InfluxDB Docker Hub container--for example, if you used the following command to start the InfluxDB quay.io container:

# quay.io-hosted InfluxDB 2.x
docker run -p 8086:8086 \
    -v "$PWD:/root/.influxdbv2" \
    quay.io/influxdb/influxdb:v2.0.3

Use this command to start an InfluxDB v2 Docker Hub container:

docker run -p 8086:8086 \
    -e INFLUXD_BOLT_PATH=/root/.influxdbv2/influxd.bolt \
    -e INFLUXD_ENGINE_PATH=/root/.influxdbv2/engine \
    -v "$PWD:/root/.influxdbv2" \
    %%IMAGE%%:2

How to use this image for InfluxDB v1

Use the InfluxDB Docker Hub image to run and set up an InfluxDB 1.x container.

Running the container

To start an InfluxDB 1.x container, enter the following command:

docker run -p 8086:8086 \
    -v "$PWD:/var/lib/influxdb" \
    %%IMAGE%%:1.8

The command passes the following arguments:

• -p 8086:8086: Exposes the InfluxDB HTTP API on host port 8086.
• -v $PWD:/var/lib/influxdb: Mounts the host's $PWD directory to the InfluxDB data directory to persist data outside the container.

Replace $PWD with the host directory where you want InfluxDB to store data.

Use Docker Volumes or Bind mounts to persist InfluxDB data and configuration directories.

Networking ports

InfluxDB uses the following networking ports:

• TCP port 8086: the default port for the HTTP API
• TCP port 2003: the port for the Graphite protocol (if enabled)

Using the docker run -P, --publish-all flag exposes the InfluxDB HTTP API to the host.

Configure InfluxDB v1 in a container

To configure InfluxDB v1 in a container, use a configuration file or environment variables.

Use a configuration file

To customize and mount a configuration file, do the following:

1. Output the current server configuration to a file in the mounted configuration directory--for example:

   docker run --rm %%IMAGE%%:1.8 influxd config > influxdb.conf
   

2. Edit the influxdb.conf file to customize server configuration options.

   docker run -p 8086:8086 \
     -v "$PWD/influxdb.conf:/etc/influxdb/influxdb.conf:ro" \
     %%IMAGE%%:1.8 -config /etc/influxdb/influxdb.conf
   

   Replace $PWD with the host directory where you want to store the configuration file.

Use environment variables

Pass INFLUXDB_ environment variables to override specific InfluxDB v1 configuration options. An environment variable overrides the equivalent option in the configuration file.

docker run -p 8086:8086 \
    -e INFLUXDB_REPORTING_DISABLED=true \
    -e INFLUXDB_META_DIR=/path/to/metadir \
    -e INFLUXDB_DATA_QUERY_LOG_ENABLED=false \
    %%IMAGE%%:1.8

Learn more about configuring InfluxDB v1.

Graphite

InfluxDB supports the Graphite line protocol, but the service and ports are not exposed by default. To run InfluxDB with Graphite support enabled, you can either use a configuration file or set the appropriate environment variables. Run InfluxDB with the default Graphite configuration:

docker run -p 8086:8086 -p 2003:2003 \
    -e INFLUXDB_GRAPHITE_ENABLED=true \
    %%IMAGE%%:1.8

See the README on GitHub for more detailed documentation to set up the Graphite service. In order to take advantage of graphite templates, you should use a configuration file by outputting a default configuration file using the steps above and modifying the [[graphite]] section.

InfluxDB v1 HTTP API

Creating a DB named mydb:

curl -G http://localhost:8086/query --data-urlencode "q=CREATE DATABASE mydb"

Inserting into the DB:

curl -i -XPOST 'http://localhost:8086/write?db=mydb' --data-binary 'cpu_load_short,host=server01,region=us-west value=0.64 1434055562000000000'

Read more about this in the official documentation.

CLI / SHELL

Start the container:

docker run --name=influxdb -d -p 8086:8086 %%IMAGE%%:1.8

Run the influx client in this container:

docker exec -it influxdb influx

Or run the influx client in a separate container:

docker run --rm --link=influxdb -it %%IMAGE%%:1.8 influx -host influxdb

InfluxDB v1 database initialization

Not recommended for production

We don't recommend using initialization options for InfluxDB v1 production scenarios, but they're useful when running standalone instances for testing.

The InfluxDB Docker Hub image lets you set initialization options when creating an InfluxDB v1 container.

The database initialization script is only called when running influxd; it isn't executed by any other program.

Environment variables

During the InfluxDB v1 set up process, the InfluxDB image uses environment variables to automatically configure some server options. You can override the following environment variables to customize set up options.

INFLUXDB_DB

Automatically initializes a database with the name of this environment variable.

INFLUXDB_HTTP_AUTH_ENABLED

Enables authentication. Either this must be set or auth-enabled = true must be set within the configuration file for any authentication-related options below to work.

INFLUXDB_ADMIN_USER

The name of the admin user to be created. If this is unset, no admin user is created.

INFLUXDB_ADMIN_PASSWORD

The password for the admin user configured with INFLUXDB_ADMIN_USER. If this is unset, a random password is generated and printed to standard out.

INFLUXDB_USER

The name of a user to be created with no privileges. If INFLUXDB_DB is set, this user will be granted read and write permissions for that database.

INFLUXDB_USER_PASSWORD

The password for the user configured with INFLUXDB_USER. If this is unset, a random password is generated and printed to standard out.

INFLUXDB_READ_USER

The name of a user to be created with read privileges on INFLUXDB_DB. If INFLUXDB_DB is not set, this user will have no granted permissions.

INFLUXDB_READ_USER_PASSWORD

The password for the user configured with INFLUXDB_READ_USER. If this is unset, a random password is generated and printed to standard out.

INFLUXDB_WRITE_USER

The name of a user to be created with write privileges on INFLUXDB_DB. If INFLUXDB_DB is not set, this user will have no granted permissions.

INFLUXDB_WRITE_USER_PASSWORD

The password for the user configured with INFLUXDB_WRITE_USER. If this is unset, a random password is generated and printed to standard out.

Initialization Files

If the Docker image finds any files with the extensions .sh or .iql inside of the /docker-entrypoint-initdb.d folder, it will execute them. The order they are executed in is determined by the shell. This is usually alphabetical order.

Manually Initialize InfluxDB v1

To manually initialize an InfluxDB v1 database, use docker run to call the /init-influxdb.sh script directly. The script takes the same initialization options as the influxd run command--for example:

docker run --rm \
    -e INFLUXDB_DB=db0 \
    -e INFLUXDB_ADMIN_USER=admin \
    -e INFLUXDB_ADMIN_PASSWORD=supersecretpassword \
    -e INFLUXDB_USER=telegraf -e \
    -e INFLUXDB_USER_PASSWORD=secretpassword \
    -v "$PWD:/var/lib/influxdb" \
    %%IMAGE%%:1.8 /init-influxdb.sh

The command creates the following:

• a database named db0
• an admin user admin with the password supersecretpassword
• a telegraf user with the password secretpassword

The --rm flag causes Docker to exit and delete the container after the script runs. The data and configuration files created during initialization remain in the mounted volume (the host's $PWD directory).