window-basic-auto-config-test.cpp 33 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250
  1. #include <chrono>
  2. #include <QFormLayout>
  3. #include <obs.hpp>
  4. #include <util/platform.h>
  5. #include <util/util_uint64.h>
  6. #include <graphics/vec4.h>
  7. #include <graphics/graphics.h>
  8. #include <graphics/math-extra.h>
  9. #include "window-basic-auto-config.hpp"
  10. #include "window-basic-main.hpp"
  11. #include "qt-wrappers.hpp"
  12. #include "obs-app.hpp"
  13. #include "ui_AutoConfigTestPage.h"
  14. #define wiz reinterpret_cast<AutoConfig *>(wizard())
  15. using namespace std;
  16. /* ------------------------------------------------------------------------- */
  17. class TestMode {
  18. obs_video_info ovi;
  19. OBSSource source[6];
  20. static void render_rand(void *, uint32_t cx, uint32_t cy)
  21. {
  22. gs_effect_t *solid = obs_get_base_effect(OBS_EFFECT_SOLID);
  23. gs_eparam_t *randomvals[3] = {
  24. gs_effect_get_param_by_name(solid, "randomvals1"),
  25. gs_effect_get_param_by_name(solid, "randomvals2"),
  26. gs_effect_get_param_by_name(solid, "randomvals3")};
  27. struct vec4 r;
  28. for (int i = 0; i < 3; i++) {
  29. vec4_set(&r, rand_float(true) * 100.0f,
  30. rand_float(true) * 100.0f,
  31. rand_float(true) * 50000.0f + 10000.0f, 0.0f);
  32. gs_effect_set_vec4(randomvals[i], &r);
  33. }
  34. while (gs_effect_loop(solid, "Random"))
  35. gs_draw_sprite(nullptr, 0, cx, cy);
  36. }
  37. public:
  38. inline TestMode()
  39. {
  40. obs_get_video_info(&ovi);
  41. obs_add_main_render_callback(render_rand, this);
  42. for (uint32_t i = 0; i < 6; i++) {
  43. source[i] = obs_get_output_source(i);
  44. obs_source_release(source[i]);
  45. obs_set_output_source(i, nullptr);
  46. }
  47. }
  48. inline ~TestMode()
  49. {
  50. for (uint32_t i = 0; i < 6; i++)
  51. obs_set_output_source(i, source[i]);
  52. obs_remove_main_render_callback(render_rand, this);
  53. obs_reset_video(&ovi);
  54. }
  55. inline void SetVideo(int cx, int cy, int fps_num, int fps_den)
  56. {
  57. obs_video_info newOVI = ovi;
  58. newOVI.output_width = (uint32_t)cx;
  59. newOVI.output_height = (uint32_t)cy;
  60. newOVI.fps_num = (uint32_t)fps_num;
  61. newOVI.fps_den = (uint32_t)fps_den;
  62. obs_reset_video(&newOVI);
  63. }
  64. };
  65. /* ------------------------------------------------------------------------- */
  66. #define TEST_STR(x) "Basic.AutoConfig.TestPage." x
  67. #define SUBTITLE_TESTING TEST_STR("Subtitle.Testing")
  68. #define SUBTITLE_COMPLETE TEST_STR("Subtitle.Complete")
  69. #define TEST_BW TEST_STR("TestingBandwidth")
  70. #define TEST_BW_CONNECTING TEST_STR("TestingBandwidth.Connecting")
  71. #define TEST_BW_CONNECT_FAIL TEST_STR("TestingBandwidth.ConnectFailed")
  72. #define TEST_BW_SERVER TEST_STR("TestingBandwidth.Server")
  73. #define TEST_RES TEST_STR("TestingRes")
  74. #define TEST_RES_VAL TEST_STR("TestingRes.Resolution")
  75. #define TEST_RES_FAIL TEST_STR("TestingRes.Fail")
  76. #define TEST_SE TEST_STR("TestingStreamEncoder")
  77. #define TEST_RE TEST_STR("TestingRecordingEncoder")
  78. #define TEST_RESULT_SE TEST_STR("Result.StreamingEncoder")
  79. #define TEST_RESULT_RE TEST_STR("Result.RecordingEncoder")
  80. void AutoConfigTestPage::StartBandwidthStage()
  81. {
  82. ui->progressLabel->setText(QTStr(TEST_BW));
  83. testThread = std::thread([this]() { TestBandwidthThread(); });
  84. }
  85. void AutoConfigTestPage::StartStreamEncoderStage()
  86. {
  87. ui->progressLabel->setText(QTStr(TEST_SE));
  88. testThread = std::thread([this]() { TestStreamEncoderThread(); });
  89. }
  90. void AutoConfigTestPage::StartRecordingEncoderStage()
  91. {
  92. ui->progressLabel->setText(QTStr(TEST_RE));
  93. testThread = std::thread([this]() { TestRecordingEncoderThread(); });
  94. }
  95. void AutoConfigTestPage::GetServers(std::vector<ServerInfo> &servers)
  96. {
  97. OBSData settings = obs_data_create();
  98. obs_data_release(settings);
  99. obs_data_set_string(settings, "service", wiz->serviceName.c_str());
  100. obs_properties_t *ppts = obs_get_service_properties("rtmp_common");
  101. obs_property_t *p = obs_properties_get(ppts, "service");
  102. obs_property_modified(p, settings);
  103. p = obs_properties_get(ppts, "server");
  104. size_t count = obs_property_list_item_count(p);
  105. servers.reserve(count);
  106. for (size_t i = 0; i < count; i++) {
  107. const char *name = obs_property_list_item_name(p, i);
  108. const char *server = obs_property_list_item_string(p, i);
  109. if (wiz->CanTestServer(name)) {
  110. ServerInfo info(name, server);
  111. servers.push_back(info);
  112. }
  113. }
  114. obs_properties_destroy(ppts);
  115. }
  116. static inline void string_depad_key(string &key)
  117. {
  118. while (!key.empty()) {
  119. char ch = key.back();
  120. if (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r')
  121. key.pop_back();
  122. else
  123. break;
  124. }
  125. }
  126. const char *FindAudioEncoderFromCodec(const char *type);
  127. void AutoConfigTestPage::TestBandwidthThread()
  128. {
  129. bool connected = false;
  130. bool stopped = false;
  131. TestMode testMode;
  132. testMode.SetVideo(128, 128, 60, 1);
  133. QMetaObject::invokeMethod(this, "Progress", Q_ARG(int, 0));
  134. /*
  135. * create encoders
  136. * create output
  137. * test for 10 seconds
  138. */
  139. QMetaObject::invokeMethod(this, "UpdateMessage",
  140. Q_ARG(QString, QStringLiteral("")));
  141. /* -----------------------------------*/
  142. /* create obs objects */
  143. const char *serverType = wiz->customServer ? "rtmp_custom"
  144. : "rtmp_common";
  145. OBSEncoder vencoder = obs_video_encoder_create("obs_x264", "test_x264",
  146. nullptr, nullptr);
  147. OBSEncoder aencoder = obs_audio_encoder_create("ffmpeg_aac", "test_aac",
  148. nullptr, 0, nullptr);
  149. OBSService service = obs_service_create(serverType, "test_service",
  150. nullptr, nullptr);
  151. obs_encoder_release(vencoder);
  152. obs_encoder_release(aencoder);
  153. obs_service_release(service);
  154. /* -----------------------------------*/
  155. /* configure settings */
  156. // service: "service", "server", "key"
  157. // vencoder: "bitrate", "rate_control",
  158. // obs_service_apply_encoder_settings
  159. // aencoder: "bitrate"
  160. // output: "bind_ip" via main config -> "Output", "BindIP"
  161. // obs_output_set_service
  162. OBSData service_settings = obs_data_create();
  163. OBSData vencoder_settings = obs_data_create();
  164. OBSData aencoder_settings = obs_data_create();
  165. OBSData output_settings = obs_data_create();
  166. obs_data_release(service_settings);
  167. obs_data_release(vencoder_settings);
  168. obs_data_release(aencoder_settings);
  169. obs_data_release(output_settings);
  170. std::string key = wiz->key;
  171. if (wiz->service == AutoConfig::Service::Twitch) {
  172. string_depad_key(key);
  173. key += "?bandwidthtest";
  174. } else if (wiz->serviceName == "Restream.io" ||
  175. wiz->serviceName == "Restream.io - RTMP") {
  176. string_depad_key(key);
  177. key += "?test=true";
  178. } else if (wiz->serviceName == "Restream.io - FTL") {
  179. string_depad_key(key);
  180. key += "?test";
  181. }
  182. obs_data_set_string(service_settings, "service",
  183. wiz->serviceName.c_str());
  184. obs_data_set_string(service_settings, "key", key.c_str());
  185. obs_data_set_int(vencoder_settings, "bitrate", wiz->startingBitrate);
  186. obs_data_set_string(vencoder_settings, "rate_control", "CBR");
  187. obs_data_set_string(vencoder_settings, "preset", "veryfast");
  188. obs_data_set_int(vencoder_settings, "keyint_sec", 2);
  189. obs_data_set_int(aencoder_settings, "bitrate", 32);
  190. OBSBasic *main = reinterpret_cast<OBSBasic *>(App()->GetMainWindow());
  191. const char *bind_ip =
  192. config_get_string(main->Config(), "Output", "BindIP");
  193. obs_data_set_string(output_settings, "bind_ip", bind_ip);
  194. /* -----------------------------------*/
  195. /* determine which servers to test */
  196. std::vector<ServerInfo> servers;
  197. if (wiz->customServer)
  198. servers.emplace_back(wiz->server.c_str(), wiz->server.c_str());
  199. else
  200. GetServers(servers);
  201. /* just use the first server if it only has one alternate server,
  202. * or if using Restream or Nimo TV due to their "auto" servers */
  203. if (servers.size() < 3 ||
  204. wiz->serviceName.substr(0, 11) == "Restream.io" ||
  205. wiz->serviceName == "Nimo TV") {
  206. servers.resize(1);
  207. } else if (wiz->service == AutoConfig::Service::Twitch &&
  208. wiz->twitchAuto) {
  209. /* if using Twitch and "Auto" is available, test 3 closest
  210. * server */
  211. servers.erase(servers.begin() + 1);
  212. servers.resize(3);
  213. }
  214. /* -----------------------------------*/
  215. /* apply service settings */
  216. obs_service_update(service, service_settings);
  217. obs_service_apply_encoder_settings(service, vencoder_settings,
  218. aencoder_settings);
  219. /* -----------------------------------*/
  220. /* create output */
  221. const char *output_type = obs_service_get_output_type(service);
  222. if (!output_type)
  223. output_type = "rtmp_output";
  224. OBSOutput output =
  225. obs_output_create(output_type, "test_stream", nullptr, nullptr);
  226. obs_output_release(output);
  227. obs_output_update(output, output_settings);
  228. const char *audio_codec = obs_output_get_supported_audio_codecs(output);
  229. if (strcmp(audio_codec, "aac") != 0) {
  230. const char *id = FindAudioEncoderFromCodec(audio_codec);
  231. aencoder = obs_audio_encoder_create(id, "test_audio", nullptr,
  232. 0, nullptr);
  233. obs_encoder_release(aencoder);
  234. }
  235. /* -----------------------------------*/
  236. /* connect encoders/services/outputs */
  237. obs_encoder_update(vencoder, vencoder_settings);
  238. obs_encoder_update(aencoder, aencoder_settings);
  239. obs_encoder_set_video(vencoder, obs_get_video());
  240. obs_encoder_set_audio(aencoder, obs_get_audio());
  241. obs_output_set_video_encoder(output, vencoder);
  242. obs_output_set_audio_encoder(output, aencoder, 0);
  243. obs_output_set_service(output, service);
  244. /* -----------------------------------*/
  245. /* connect signals */
  246. auto on_started = [&]() {
  247. unique_lock<mutex> lock(m);
  248. connected = true;
  249. stopped = false;
  250. cv.notify_one();
  251. };
  252. auto on_stopped = [&]() {
  253. unique_lock<mutex> lock(m);
  254. connected = false;
  255. stopped = true;
  256. cv.notify_one();
  257. };
  258. using on_started_t = decltype(on_started);
  259. using on_stopped_t = decltype(on_stopped);
  260. auto pre_on_started = [](void *data, calldata_t *) {
  261. on_started_t &on_started =
  262. *reinterpret_cast<on_started_t *>(data);
  263. on_started();
  264. };
  265. auto pre_on_stopped = [](void *data, calldata_t *) {
  266. on_stopped_t &on_stopped =
  267. *reinterpret_cast<on_stopped_t *>(data);
  268. on_stopped();
  269. };
  270. signal_handler *sh = obs_output_get_signal_handler(output);
  271. signal_handler_connect(sh, "start", pre_on_started, &on_started);
  272. signal_handler_connect(sh, "stop", pre_on_stopped, &on_stopped);
  273. /* -----------------------------------*/
  274. /* test servers */
  275. bool success = false;
  276. for (size_t i = 0; i < servers.size(); i++) {
  277. auto &server = servers[i];
  278. connected = false;
  279. stopped = false;
  280. int per = int((i + 1) * 100 / servers.size());
  281. QMetaObject::invokeMethod(this, "Progress", Q_ARG(int, per));
  282. QMetaObject::invokeMethod(
  283. this, "UpdateMessage",
  284. Q_ARG(QString, QTStr(TEST_BW_CONNECTING)
  285. .arg(server.name.c_str())));
  286. obs_data_set_string(service_settings, "server",
  287. server.address.c_str());
  288. obs_service_update(service, service_settings);
  289. if (!obs_output_start(output))
  290. continue;
  291. unique_lock<mutex> ul(m);
  292. if (cancel) {
  293. ul.unlock();
  294. obs_output_force_stop(output);
  295. return;
  296. }
  297. if (!stopped && !connected)
  298. cv.wait(ul);
  299. if (cancel) {
  300. ul.unlock();
  301. obs_output_force_stop(output);
  302. return;
  303. }
  304. if (!connected)
  305. continue;
  306. QMetaObject::invokeMethod(
  307. this, "UpdateMessage",
  308. Q_ARG(QString,
  309. QTStr(TEST_BW_SERVER).arg(server.name.c_str())));
  310. /* ignore first 2.5 seconds due to possible buffering skewing
  311. * the result */
  312. cv.wait_for(ul, chrono::milliseconds(2500));
  313. if (stopped)
  314. continue;
  315. if (cancel) {
  316. ul.unlock();
  317. obs_output_force_stop(output);
  318. return;
  319. }
  320. /* continue test */
  321. int start_bytes = (int)obs_output_get_total_bytes(output);
  322. uint64_t t_start = os_gettime_ns();
  323. cv.wait_for(ul, chrono::seconds(10));
  324. if (stopped)
  325. continue;
  326. if (cancel) {
  327. ul.unlock();
  328. obs_output_force_stop(output);
  329. return;
  330. }
  331. obs_output_stop(output);
  332. cv.wait(ul);
  333. uint64_t total_time = os_gettime_ns() - t_start;
  334. if (total_time == 0)
  335. total_time = 1;
  336. int total_bytes =
  337. (int)obs_output_get_total_bytes(output) - start_bytes;
  338. uint64_t bitrate = util_mul_div64(
  339. total_bytes, 8ULL * 1000000000ULL / 1000ULL,
  340. total_time);
  341. if (obs_output_get_frames_dropped(output) ||
  342. (int)bitrate < (wiz->startingBitrate * 75 / 100)) {
  343. server.bitrate = (int)bitrate * 70 / 100;
  344. } else {
  345. server.bitrate = wiz->startingBitrate;
  346. }
  347. server.ms = obs_output_get_connect_time_ms(output);
  348. success = true;
  349. }
  350. if (!success) {
  351. QMetaObject::invokeMethod(this, "Failure",
  352. Q_ARG(QString,
  353. QTStr(TEST_BW_CONNECT_FAIL)));
  354. return;
  355. }
  356. int bestBitrate = 0;
  357. int bestMS = 0x7FFFFFFF;
  358. string bestServer;
  359. string bestServerName;
  360. for (auto &server : servers) {
  361. bool close = abs(server.bitrate - bestBitrate) < 400;
  362. if ((!close && server.bitrate > bestBitrate) ||
  363. (close && server.ms < bestMS)) {
  364. bestServer = server.address;
  365. bestServerName = server.name;
  366. bestBitrate = server.bitrate;
  367. bestMS = server.ms;
  368. }
  369. }
  370. wiz->server = std::move(bestServer);
  371. wiz->serverName = std::move(bestServerName);
  372. wiz->idealBitrate = bestBitrate;
  373. QMetaObject::invokeMethod(this, "NextStage");
  374. }
  375. /* this is used to estimate the lower bitrate limit for a given
  376. * resolution/fps. yes, it is a totally arbitrary equation that gets
  377. * the closest to the expected values */
  378. static long double EstimateBitrateVal(int cx, int cy, int fps_num, int fps_den)
  379. {
  380. long fps = (long double)fps_num / (long double)fps_den;
  381. long double areaVal = pow((long double)(cx * cy), 0.85l);
  382. return areaVal * sqrt(pow(fps, 1.1l));
  383. }
  384. static long double EstimateMinBitrate(int cx, int cy, int fps_num, int fps_den)
  385. {
  386. long double val = EstimateBitrateVal(1920, 1080, 60, 1) / 5800.0l;
  387. return EstimateBitrateVal(cx, cy, fps_num, fps_den) / val;
  388. }
  389. static long double EstimateUpperBitrate(int cx, int cy, int fps_num,
  390. int fps_den)
  391. {
  392. long double val = EstimateBitrateVal(1280, 720, 30, 1) / 3000.0l;
  393. return EstimateBitrateVal(cx, cy, fps_num, fps_den) / val;
  394. }
  395. struct Result {
  396. int cx;
  397. int cy;
  398. int fps_num;
  399. int fps_den;
  400. inline Result(int cx_, int cy_, int fps_num_, int fps_den_)
  401. : cx(cx_), cy(cy_), fps_num(fps_num_), fps_den(fps_den_)
  402. {
  403. }
  404. };
  405. static void CalcBaseRes(int &baseCX, int &baseCY)
  406. {
  407. const int maxBaseArea = 1920 * 1200;
  408. const int clipResArea = 1920 * 1080;
  409. /* if base resolution unusually high, recalculate to a more reasonable
  410. * value to start the downscaling at, based upon 1920x1080's area.
  411. *
  412. * for 16:9 resolutions this will always change the starting value to
  413. * 1920x1080 */
  414. if ((baseCX * baseCY) > maxBaseArea) {
  415. long double xyAspect =
  416. (long double)baseCX / (long double)baseCY;
  417. baseCY = (int)sqrt((long double)clipResArea / xyAspect);
  418. baseCX = (int)((long double)baseCY * xyAspect);
  419. }
  420. }
  421. bool AutoConfigTestPage::TestSoftwareEncoding()
  422. {
  423. TestMode testMode;
  424. QMetaObject::invokeMethod(this, "UpdateMessage",
  425. Q_ARG(QString, QStringLiteral("")));
  426. /* -----------------------------------*/
  427. /* create obs objects */
  428. OBSEncoder vencoder = obs_video_encoder_create("obs_x264", "test_x264",
  429. nullptr, nullptr);
  430. OBSEncoder aencoder = obs_audio_encoder_create("ffmpeg_aac", "test_aac",
  431. nullptr, 0, nullptr);
  432. OBSOutput output =
  433. obs_output_create("null_output", "null", nullptr, nullptr);
  434. obs_output_release(output);
  435. obs_encoder_release(vencoder);
  436. obs_encoder_release(aencoder);
  437. /* -----------------------------------*/
  438. /* configure settings */
  439. OBSData aencoder_settings = obs_data_create();
  440. OBSData vencoder_settings = obs_data_create();
  441. obs_data_release(aencoder_settings);
  442. obs_data_release(vencoder_settings);
  443. obs_data_set_int(aencoder_settings, "bitrate", 32);
  444. if (wiz->type != AutoConfig::Type::Recording) {
  445. obs_data_set_int(vencoder_settings, "keyint_sec", 2);
  446. obs_data_set_int(vencoder_settings, "bitrate",
  447. wiz->idealBitrate);
  448. obs_data_set_string(vencoder_settings, "rate_control", "CBR");
  449. obs_data_set_string(vencoder_settings, "profile", "main");
  450. obs_data_set_string(vencoder_settings, "preset", "veryfast");
  451. } else {
  452. obs_data_set_int(vencoder_settings, "crf", 20);
  453. obs_data_set_string(vencoder_settings, "rate_control", "CRF");
  454. obs_data_set_string(vencoder_settings, "profile", "high");
  455. obs_data_set_string(vencoder_settings, "preset", "veryfast");
  456. }
  457. /* -----------------------------------*/
  458. /* apply settings */
  459. obs_encoder_update(vencoder, vencoder_settings);
  460. obs_encoder_update(aencoder, aencoder_settings);
  461. /* -----------------------------------*/
  462. /* connect encoders/services/outputs */
  463. obs_output_set_video_encoder(output, vencoder);
  464. obs_output_set_audio_encoder(output, aencoder, 0);
  465. /* -----------------------------------*/
  466. /* connect signals */
  467. auto on_stopped = [&]() {
  468. unique_lock<mutex> lock(m);
  469. cv.notify_one();
  470. };
  471. using on_stopped_t = decltype(on_stopped);
  472. auto pre_on_stopped = [](void *data, calldata_t *) {
  473. on_stopped_t &on_stopped =
  474. *reinterpret_cast<on_stopped_t *>(data);
  475. on_stopped();
  476. };
  477. signal_handler *sh = obs_output_get_signal_handler(output);
  478. signal_handler_connect(sh, "deactivate", pre_on_stopped, &on_stopped);
  479. /* -----------------------------------*/
  480. /* calculate starting resolution */
  481. int baseCX = wiz->baseResolutionCX;
  482. int baseCY = wiz->baseResolutionCY;
  483. CalcBaseRes(baseCX, baseCY);
  484. /* -----------------------------------*/
  485. /* calculate starting test rates */
  486. int pcores = os_get_physical_cores();
  487. int lcores = os_get_logical_cores();
  488. int maxDataRate;
  489. if (lcores > 8 || pcores > 4) {
  490. /* superb */
  491. maxDataRate = 1920 * 1200 * 60 + 1000;
  492. } else if (lcores > 4 && pcores == 4) {
  493. /* great */
  494. maxDataRate = 1920 * 1080 * 60 + 1000;
  495. } else if (pcores == 4) {
  496. /* okay */
  497. maxDataRate = 1920 * 1080 * 30 + 1000;
  498. } else {
  499. /* toaster */
  500. maxDataRate = 960 * 540 * 30 + 1000;
  501. }
  502. /* -----------------------------------*/
  503. /* perform tests */
  504. vector<Result> results;
  505. int i = 0;
  506. int count = 1;
  507. auto testRes = [&](int cy, int fps_num, int fps_den, bool force) {
  508. int per = ++i * 100 / count;
  509. QMetaObject::invokeMethod(this, "Progress", Q_ARG(int, per));
  510. if (cy > baseCY)
  511. return true;
  512. /* no need for more than 3 tests max */
  513. if (results.size() >= 3)
  514. return true;
  515. if (!fps_num || !fps_den) {
  516. fps_num = wiz->specificFPSNum;
  517. fps_den = wiz->specificFPSDen;
  518. }
  519. long double fps = ((long double)fps_num / (long double)fps_den);
  520. int cx = int(((long double)baseCX / (long double)baseCY) *
  521. (long double)cy);
  522. if (!force && wiz->type != AutoConfig::Type::Recording) {
  523. int est = EstimateMinBitrate(cx, cy, fps_num, fps_den);
  524. if (est > wiz->idealBitrate)
  525. return true;
  526. }
  527. long double rate = (long double)cx * (long double)cy * fps;
  528. if (!force && rate > maxDataRate)
  529. return true;
  530. testMode.SetVideo(cx, cy, fps_num, fps_den);
  531. obs_encoder_set_video(vencoder, obs_get_video());
  532. obs_encoder_set_audio(aencoder, obs_get_audio());
  533. obs_encoder_update(vencoder, vencoder_settings);
  534. obs_output_set_media(output, obs_get_video(), obs_get_audio());
  535. QString cxStr = QString::number(cx);
  536. QString cyStr = QString::number(cy);
  537. QString fpsStr = (fps_den > 1) ? QString::number(fps, 'f', 2)
  538. : QString::number(fps, 'g', 2);
  539. QMetaObject::invokeMethod(
  540. this, "UpdateMessage",
  541. Q_ARG(QString,
  542. QTStr(TEST_RES_VAL).arg(cxStr, cyStr, fpsStr)));
  543. unique_lock<mutex> ul(m);
  544. if (cancel)
  545. return false;
  546. if (!obs_output_start(output)) {
  547. QMetaObject::invokeMethod(this, "Failure",
  548. Q_ARG(QString,
  549. QTStr(TEST_RES_FAIL)));
  550. return false;
  551. }
  552. cv.wait_for(ul, chrono::seconds(5));
  553. obs_output_stop(output);
  554. cv.wait(ul);
  555. int skipped =
  556. (int)video_output_get_skipped_frames(obs_get_video());
  557. if (force || skipped <= 10)
  558. results.emplace_back(cx, cy, fps_num, fps_den);
  559. return !cancel;
  560. };
  561. if (wiz->specificFPSNum && wiz->specificFPSDen) {
  562. count = 7;
  563. if (!testRes(2160, 0, 0, false))
  564. return false;
  565. if (!testRes(1440, 0, 0, false))
  566. return false;
  567. if (!testRes(1080, 0, 0, false))
  568. return false;
  569. if (!testRes(720, 0, 0, false))
  570. return false;
  571. if (!testRes(480, 0, 0, false))
  572. return false;
  573. if (!testRes(360, 0, 0, false))
  574. return false;
  575. if (!testRes(240, 0, 0, true))
  576. return false;
  577. } else {
  578. count = 14;
  579. if (!testRes(2160, 60, 1, false))
  580. return false;
  581. if (!testRes(2160, 30, 1, false))
  582. return false;
  583. if (!testRes(1440, 60, 1, false))
  584. return false;
  585. if (!testRes(1440, 30, 1, false))
  586. return false;
  587. if (!testRes(1080, 60, 1, false))
  588. return false;
  589. if (!testRes(1080, 30, 1, false))
  590. return false;
  591. if (!testRes(720, 60, 1, false))
  592. return false;
  593. if (!testRes(720, 30, 1, false))
  594. return false;
  595. if (!testRes(480, 60, 1, false))
  596. return false;
  597. if (!testRes(480, 30, 1, false))
  598. return false;
  599. if (!testRes(360, 60, 1, false))
  600. return false;
  601. if (!testRes(360, 30, 1, false))
  602. return false;
  603. if (!testRes(240, 60, 1, false))
  604. return false;
  605. if (!testRes(240, 30, 1, true))
  606. return false;
  607. }
  608. /* -----------------------------------*/
  609. /* find preferred settings */
  610. int minArea = 960 * 540 + 1000;
  611. if (!wiz->specificFPSNum && wiz->preferHighFPS && results.size() > 1) {
  612. Result &result1 = results[0];
  613. Result &result2 = results[1];
  614. if (result1.fps_num == 30 && result2.fps_num == 60) {
  615. int nextArea = result2.cx * result2.cy;
  616. if (nextArea >= minArea)
  617. results.erase(results.begin());
  618. }
  619. }
  620. Result result = results.front();
  621. wiz->idealResolutionCX = result.cx;
  622. wiz->idealResolutionCY = result.cy;
  623. wiz->idealFPSNum = result.fps_num;
  624. wiz->idealFPSDen = result.fps_den;
  625. long double fUpperBitrate = EstimateUpperBitrate(
  626. result.cx, result.cy, result.fps_num, result.fps_den);
  627. int upperBitrate = int(floor(fUpperBitrate / 50.0l) * 50.0l);
  628. if (wiz->streamingEncoder != AutoConfig::Encoder::x264) {
  629. upperBitrate *= 114;
  630. upperBitrate /= 100;
  631. }
  632. if (wiz->idealBitrate > upperBitrate)
  633. wiz->idealBitrate = upperBitrate;
  634. softwareTested = true;
  635. return true;
  636. }
  637. void AutoConfigTestPage::FindIdealHardwareResolution()
  638. {
  639. int baseCX = wiz->baseResolutionCX;
  640. int baseCY = wiz->baseResolutionCY;
  641. CalcBaseRes(baseCX, baseCY);
  642. vector<Result> results;
  643. int pcores = os_get_physical_cores();
  644. int maxDataRate;
  645. if (pcores >= 4) {
  646. maxDataRate = 1920 * 1200 * 60 + 1000;
  647. } else {
  648. maxDataRate = 1280 * 720 * 30 + 1000;
  649. }
  650. auto testRes = [&](int cy, int fps_num, int fps_den, bool force) {
  651. if (cy > baseCY)
  652. return;
  653. if (results.size() >= 3)
  654. return;
  655. if (!fps_num || !fps_den) {
  656. fps_num = wiz->specificFPSNum;
  657. fps_den = wiz->specificFPSDen;
  658. }
  659. long double fps = ((long double)fps_num / (long double)fps_den);
  660. int cx = int(((long double)baseCX / (long double)baseCY) *
  661. (long double)cy);
  662. long double rate = (long double)cx * (long double)cy * fps;
  663. if (!force && rate > maxDataRate)
  664. return;
  665. AutoConfig::Encoder encType = wiz->streamingEncoder;
  666. bool nvenc = encType == AutoConfig::Encoder::NVENC;
  667. int minBitrate = EstimateMinBitrate(cx, cy, fps_num, fps_den);
  668. /* most hardware encoders don't have a good quality to bitrate
  669. * ratio, so increase the minimum bitrate estimate for them.
  670. * NVENC currently is the exception because of the improvements
  671. * its made to its quality in recent generations. */
  672. if (!nvenc)
  673. minBitrate = minBitrate * 114 / 100;
  674. if (wiz->type == AutoConfig::Type::Recording)
  675. force = true;
  676. if (force || wiz->idealBitrate >= minBitrate)
  677. results.emplace_back(cx, cy, fps_num, fps_den);
  678. };
  679. if (wiz->specificFPSNum && wiz->specificFPSDen) {
  680. testRes(2160, 0, 0, false);
  681. testRes(1440, 0, 0, false);
  682. testRes(1080, 0, 0, false);
  683. testRes(720, 0, 0, false);
  684. testRes(480, 0, 0, false);
  685. testRes(360, 0, 0, false);
  686. testRes(240, 0, 0, true);
  687. } else {
  688. testRes(2160, 60, 1, false);
  689. testRes(2160, 30, 1, false);
  690. testRes(1440, 60, 1, false);
  691. testRes(1440, 30, 1, false);
  692. testRes(1080, 60, 1, false);
  693. testRes(1080, 30, 1, false);
  694. testRes(720, 60, 1, false);
  695. testRes(720, 30, 1, false);
  696. testRes(480, 60, 1, false);
  697. testRes(480, 30, 1, false);
  698. testRes(360, 60, 1, false);
  699. testRes(360, 30, 1, false);
  700. testRes(240, 60, 1, false);
  701. testRes(240, 30, 1, true);
  702. }
  703. int minArea = 960 * 540 + 1000;
  704. if (!wiz->specificFPSNum && wiz->preferHighFPS && results.size() > 1) {
  705. Result &result1 = results[0];
  706. Result &result2 = results[1];
  707. if (result1.fps_num == 30 && result2.fps_num == 60) {
  708. int nextArea = result2.cx * result2.cy;
  709. if (nextArea >= minArea)
  710. results.erase(results.begin());
  711. }
  712. }
  713. Result result = results.front();
  714. wiz->idealResolutionCX = result.cx;
  715. wiz->idealResolutionCY = result.cy;
  716. wiz->idealFPSNum = result.fps_num;
  717. wiz->idealFPSDen = result.fps_den;
  718. }
  719. void AutoConfigTestPage::TestStreamEncoderThread()
  720. {
  721. bool preferHardware = wiz->preferHardware;
  722. if (!softwareTested) {
  723. if (!preferHardware || !wiz->hardwareEncodingAvailable) {
  724. if (!TestSoftwareEncoding()) {
  725. return;
  726. }
  727. }
  728. }
  729. if (!softwareTested) {
  730. if (wiz->nvencAvailable)
  731. wiz->streamingEncoder = AutoConfig::Encoder::NVENC;
  732. else if (wiz->qsvAvailable)
  733. wiz->streamingEncoder = AutoConfig::Encoder::QSV;
  734. else
  735. wiz->streamingEncoder = AutoConfig::Encoder::AMD;
  736. } else {
  737. wiz->streamingEncoder = AutoConfig::Encoder::x264;
  738. }
  739. if (preferHardware && !softwareTested && wiz->hardwareEncodingAvailable)
  740. FindIdealHardwareResolution();
  741. QMetaObject::invokeMethod(this, "NextStage");
  742. }
  743. void AutoConfigTestPage::TestRecordingEncoderThread()
  744. {
  745. if (!wiz->hardwareEncodingAvailable && !softwareTested) {
  746. if (!TestSoftwareEncoding()) {
  747. return;
  748. }
  749. }
  750. if (wiz->type == AutoConfig::Type::Recording &&
  751. wiz->hardwareEncodingAvailable)
  752. FindIdealHardwareResolution();
  753. wiz->recordingQuality = AutoConfig::Quality::High;
  754. bool recordingOnly = wiz->type == AutoConfig::Type::Recording;
  755. if (wiz->hardwareEncodingAvailable) {
  756. if (wiz->nvencAvailable)
  757. wiz->recordingEncoder = AutoConfig::Encoder::NVENC;
  758. else if (wiz->qsvAvailable)
  759. wiz->recordingEncoder = AutoConfig::Encoder::QSV;
  760. else
  761. wiz->recordingEncoder = AutoConfig::Encoder::AMD;
  762. } else {
  763. wiz->recordingEncoder = AutoConfig::Encoder::x264;
  764. }
  765. if (wiz->recordingEncoder != AutoConfig::Encoder::NVENC) {
  766. if (!recordingOnly) {
  767. wiz->recordingEncoder = AutoConfig::Encoder::Stream;
  768. wiz->recordingQuality = AutoConfig::Quality::Stream;
  769. }
  770. }
  771. QMetaObject::invokeMethod(this, "NextStage");
  772. }
  773. #define ENCODER_TEXT(x) "Basic.Settings.Output.Simple.Encoder." x
  774. #define ENCODER_SOFTWARE ENCODER_TEXT("Software")
  775. #define ENCODER_NVENC ENCODER_TEXT("Hardware.NVENC")
  776. #define ENCODER_QSV ENCODER_TEXT("Hardware.QSV")
  777. #define ENCODER_AMD ENCODER_TEXT("Hardware.AMD")
  778. #define QUALITY_SAME "Basic.Settings.Output.Simple.RecordingQuality.Stream"
  779. #define QUALITY_HIGH "Basic.Settings.Output.Simple.RecordingQuality.Small"
  780. void set_closest_res(int &cx, int &cy, struct obs_service_resolution *res_list,
  781. size_t count)
  782. {
  783. int best_pixel_diff = 0x7FFFFFFF;
  784. int start_cx = cx;
  785. int start_cy = cy;
  786. for (size_t i = 0; i < count; i++) {
  787. struct obs_service_resolution &res = res_list[i];
  788. int pixel_cx_diff = abs(start_cx - res.cx);
  789. int pixel_cy_diff = abs(start_cy - res.cy);
  790. int pixel_diff = pixel_cx_diff + pixel_cy_diff;
  791. if (pixel_diff < best_pixel_diff) {
  792. best_pixel_diff = pixel_diff;
  793. cx = res.cx;
  794. cy = res.cy;
  795. }
  796. }
  797. }
  798. void AutoConfigTestPage::FinalizeResults()
  799. {
  800. ui->stackedWidget->setCurrentIndex(1);
  801. setSubTitle(QTStr(SUBTITLE_COMPLETE));
  802. QFormLayout *form = results;
  803. auto encName = [](AutoConfig::Encoder enc) -> QString {
  804. switch (enc) {
  805. case AutoConfig::Encoder::x264:
  806. return QTStr(ENCODER_SOFTWARE);
  807. case AutoConfig::Encoder::NVENC:
  808. return QTStr(ENCODER_NVENC);
  809. case AutoConfig::Encoder::QSV:
  810. return QTStr(ENCODER_QSV);
  811. case AutoConfig::Encoder::AMD:
  812. return QTStr(ENCODER_AMD);
  813. case AutoConfig::Encoder::Stream:
  814. return QTStr(QUALITY_SAME);
  815. }
  816. return QTStr(ENCODER_SOFTWARE);
  817. };
  818. auto newLabel = [this](const char *str) -> QLabel * {
  819. return new QLabel(QTStr(str), this);
  820. };
  821. if (wiz->type == AutoConfig::Type::Streaming) {
  822. const char *serverType = wiz->customServer ? "rtmp_custom"
  823. : "rtmp_common";
  824. OBSService service = obs_service_create(
  825. serverType, "temp_service", nullptr, nullptr);
  826. obs_service_release(service);
  827. OBSData service_settings = obs_data_create();
  828. OBSData vencoder_settings = obs_data_create();
  829. obs_data_release(service_settings);
  830. obs_data_release(vencoder_settings);
  831. obs_data_set_int(vencoder_settings, "bitrate",
  832. wiz->idealBitrate);
  833. obs_data_set_string(service_settings, "service",
  834. wiz->serviceName.c_str());
  835. obs_service_update(service, service_settings);
  836. obs_service_apply_encoder_settings(service, vencoder_settings,
  837. nullptr);
  838. struct obs_service_resolution *res_list;
  839. size_t res_count;
  840. int maxFPS;
  841. obs_service_get_supported_resolutions(service, &res_list,
  842. &res_count);
  843. obs_service_get_max_fps(service, &maxFPS);
  844. if (res_list) {
  845. set_closest_res(wiz->idealResolutionCX,
  846. wiz->idealResolutionCY, res_list,
  847. res_count);
  848. }
  849. if (maxFPS) {
  850. double idealFPS = (double)wiz->idealFPSNum /
  851. (double)wiz->idealFPSDen;
  852. if (idealFPS > (double)maxFPS) {
  853. wiz->idealFPSNum = maxFPS;
  854. wiz->idealFPSDen = 1;
  855. }
  856. }
  857. wiz->idealBitrate =
  858. (int)obs_data_get_int(vencoder_settings, "bitrate");
  859. if (!wiz->customServer)
  860. form->addRow(
  861. newLabel("Basic.AutoConfig.StreamPage.Service"),
  862. new QLabel(wiz->serviceName.c_str(),
  863. ui->finishPage));
  864. form->addRow(newLabel("Basic.AutoConfig.StreamPage.Server"),
  865. new QLabel(wiz->serverName.c_str(),
  866. ui->finishPage));
  867. form->addRow(newLabel("Basic.Settings.Output.VideoBitrate"),
  868. new QLabel(QString::number(wiz->idealBitrate),
  869. ui->finishPage));
  870. form->addRow(newLabel(TEST_RESULT_SE),
  871. new QLabel(encName(wiz->streamingEncoder),
  872. ui->finishPage));
  873. }
  874. QString baseRes =
  875. QString("%1x%2").arg(QString::number(wiz->baseResolutionCX),
  876. QString::number(wiz->baseResolutionCY));
  877. QString scaleRes =
  878. QString("%1x%2").arg(QString::number(wiz->idealResolutionCX),
  879. QString::number(wiz->idealResolutionCY));
  880. if (wiz->recordingEncoder != AutoConfig::Encoder::Stream ||
  881. wiz->recordingQuality != AutoConfig::Quality::Stream)
  882. form->addRow(newLabel(TEST_RESULT_RE),
  883. new QLabel(encName(wiz->recordingEncoder),
  884. ui->finishPage));
  885. QString recQuality;
  886. switch (wiz->recordingQuality) {
  887. case AutoConfig::Quality::High:
  888. recQuality = QTStr(QUALITY_HIGH);
  889. break;
  890. case AutoConfig::Quality::Stream:
  891. recQuality = QTStr(QUALITY_SAME);
  892. break;
  893. }
  894. form->addRow(newLabel("Basic.Settings.Output.Simple.RecordingQuality"),
  895. new QLabel(recQuality, ui->finishPage));
  896. long double fps =
  897. (long double)wiz->idealFPSNum / (long double)wiz->idealFPSDen;
  898. QString fpsStr = (wiz->idealFPSDen > 1) ? QString::number(fps, 'f', 2)
  899. : QString::number(fps, 'g', 2);
  900. form->addRow(newLabel("Basic.Settings.Video.BaseResolution"),
  901. new QLabel(baseRes, ui->finishPage));
  902. form->addRow(newLabel("Basic.Settings.Video.ScaledResolution"),
  903. new QLabel(scaleRes, ui->finishPage));
  904. form->addRow(newLabel("Basic.Settings.Video.FPS"),
  905. new QLabel(fpsStr, ui->finishPage));
  906. }
  907. #define STARTING_SEPARATOR \
  908. "\n==== Auto-config wizard testing commencing ======\n"
  909. #define STOPPING_SEPARATOR \
  910. "\n==== Auto-config wizard testing stopping ========\n"
  911. void AutoConfigTestPage::NextStage()
  912. {
  913. if (testThread.joinable())
  914. testThread.join();
  915. if (cancel)
  916. return;
  917. ui->subProgressLabel->setText(QString());
  918. /* make it skip to bandwidth stage if only set to config recording */
  919. if (stage == Stage::Starting) {
  920. if (!started) {
  921. blog(LOG_INFO, STARTING_SEPARATOR);
  922. started = true;
  923. }
  924. if (wiz->type != AutoConfig::Type::Streaming) {
  925. stage = Stage::StreamEncoder;
  926. } else if (!wiz->bandwidthTest) {
  927. stage = Stage::BandwidthTest;
  928. }
  929. }
  930. if (stage == Stage::Starting) {
  931. stage = Stage::BandwidthTest;
  932. StartBandwidthStage();
  933. } else if (stage == Stage::BandwidthTest) {
  934. stage = Stage::StreamEncoder;
  935. StartStreamEncoderStage();
  936. } else if (stage == Stage::StreamEncoder) {
  937. stage = Stage::RecordingEncoder;
  938. StartRecordingEncoderStage();
  939. } else {
  940. stage = Stage::Finished;
  941. FinalizeResults();
  942. emit completeChanged();
  943. }
  944. }
  945. void AutoConfigTestPage::UpdateMessage(QString message)
  946. {
  947. ui->subProgressLabel->setText(message);
  948. }
  949. void AutoConfigTestPage::Failure(QString message)
  950. {
  951. ui->errorLabel->setText(message);
  952. ui->stackedWidget->setCurrentIndex(2);
  953. }
  954. void AutoConfigTestPage::Progress(int percentage)
  955. {
  956. ui->progressBar->setValue(percentage);
  957. }
  958. AutoConfigTestPage::AutoConfigTestPage(QWidget *parent)
  959. : QWizardPage(parent), ui(new Ui_AutoConfigTestPage)
  960. {
  961. ui->setupUi(this);
  962. setTitle(QTStr("Basic.AutoConfig.TestPage"));
  963. setSubTitle(QTStr(SUBTITLE_TESTING));
  964. setCommitPage(true);
  965. }
  966. AutoConfigTestPage::~AutoConfigTestPage()
  967. {
  968. delete ui;
  969. if (testThread.joinable()) {
  970. {
  971. unique_lock<mutex> ul(m);
  972. cancel = true;
  973. cv.notify_one();
  974. }
  975. testThread.join();
  976. }
  977. if (started)
  978. blog(LOG_INFO, STOPPING_SEPARATOR);
  979. }
  980. void AutoConfigTestPage::initializePage()
  981. {
  982. if (wiz->type == AutoConfig::Type::VirtualCam) {
  983. wiz->idealResolutionCX = wiz->baseResolutionCX;
  984. wiz->idealResolutionCY = wiz->baseResolutionCY;
  985. wiz->idealFPSNum = 30;
  986. wiz->idealFPSDen = 1;
  987. stage = Stage::Finished;
  988. } else {
  989. stage = Stage::Starting;
  990. }
  991. setSubTitle(QTStr(SUBTITLE_TESTING));
  992. softwareTested = false;
  993. cancel = false;
  994. DeleteLayout(results);
  995. results = new QFormLayout();
  996. results->setContentsMargins(0, 0, 0, 0);
  997. ui->finishPageLayout->insertLayout(1, results);
  998. ui->stackedWidget->setCurrentIndex(0);
  999. NextStage();
  1000. }
  1001. void AutoConfigTestPage::cleanupPage()
  1002. {
  1003. if (testThread.joinable()) {
  1004. {
  1005. unique_lock<mutex> ul(m);
  1006. cancel = true;
  1007. cv.notify_one();
  1008. }
  1009. testThread.join();
  1010. }
  1011. }
  1012. bool AutoConfigTestPage::isComplete() const
  1013. {
  1014. return stage == Stage::Finished;
  1015. }
  1016. int AutoConfigTestPage::nextId() const
  1017. {
  1018. return -1;
  1019. }