Translation update

gui/lang-bg.json

@@ -38,6 +38,7 @@
     "Idle": "Без Работа",
     "Ignore Permissions": "Игнорирай Права за Достъп",
     "Keep Versions": "Пази Версии",
+    "Last seen": "Last seen",
     "Latest Release": "Най-новата Версия",
     "Local Discovery": "Локално Откриване",
     "Local Discovery Port": "Порт за Локално Откриване",
@@ -45,7 +46,10 @@
     "Master Repo": "Главна Папка",
     "Max File Change Rate (KiB/s)": "Макс. Скорост на Промяна (KiB/s)",
     "Max Outstanding Requests": "Макс. Неизпълени Заявки",
+    "Maximum Age": "Maximum Age",
+    "Never": "Never",
     "No": "Не",
+    "No File Versioning": "No File Versioning",
     "Node ID": "Код на Машината",
     "Node Identification": "Идентификация на Машината",
     "Node Name": "Име на Машината",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Лимит на Изходящата Скорост (KiB/s)",
     "Override Changes": "Замени Промените",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Пътят до папката на този компютър. Ще бъде създадена ако не съществува. Символът тилда (~) може да бъде използван като заместител на",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Моля изчакай",
     "Preview Usage Report": "Разгледай Доклада за Използване",
     "RAM Utilization": "RAM Натоварване",
@@ -65,6 +70,7 @@
     "Repository Master": "Главна Папка",
     "Repository Path": "Път до Папката",
     "Rescan": "Повторно Сканиране",
+    "Rescan Interval": "Rescan Interval",
     "Rescan Interval (s)": "Интеравал(и) на Сканиране",
     "Restart": "Рестартирай",
     "Restart Needed": "Изискава се Рестартиране",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Покажи вмест ID-то на Компютъра в статус на клъстъра. Ще бъде предлагано на други комютри като име по подразбиране.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Покажи вмест ID-то на Компютъра в статус на клъстъра. Ще бъде обновено с името по подразбиране изпратено от другия компютър.",
     "Shutdown": "Спри Програмата",
+    "Simple File Versioning": "Simple File Versioning",
     "Source Code": "Сорс Код",
+    "Staggered File Versioning": "Staggered File Versioning",
     "Start Browser": "Стартирай Браузъра",
     "Stopped": "Спряна",
     "Support / Forum": "Помощ / Форум",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Криптираният доклад се изпраща дневно. Използва се, за да следи общи платформи, размери на папки и версии на приложението. Ако събираните данни се променят, ще бъдете информиран с подобен на този диалог.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Въведни код на машината не е валиден. Трябва да бъде 52 символа и да се състои от букви, цифри като интервалите и тиретата са пожелание.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Въведни код на машината не е валиден. Трябва да бъде 52 или 56 символа и да се състои от букви, цифри като интервалите и тиретата са пожелание.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "Кодът на машината не може да бъде празен.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Кодът на машината, който си въвел може да бъде намерен в \"Промени > Покажи Идентификатора\". Интервалите и тиретата са пожелание(биват прескачани).",
     "The number of old versions to keep, per file.": "Броят стари версии, които да бъдат пазени за всеки файл.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Идентификаторът на папка трябва да бъде къс(64 символа или по-малко) състоящ се само от букви, цифри, точка(.), тире(-) и подчерта (_).",
     "The repository ID must be unique.": "Идентификаторът на папката тряба да бъде уникален.",
     "The repository path cannot be blank.": "Пътят до папката не може да бъде празен.",
+    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
     "Unknown": "Неясен",
     "Up to Date": "Актуален",
     "Upgrade To {%version%}": "Обновен До {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Използвай Компресиране",
     "Use HTTPS for GUI": "Използвай HTTPS за Потребителския Интерфейс",
     "Version": "Версия",
+    "Versions Path": "Versions Path",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Когато добавяш нова машина помни, че твоята машина също трябва да бъде добавена от другата страна.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Когато добавяш нов идентификатор на папка помни, че той се използва за свързване на папките на различни машини. Главни/малки букви са от значение и трябва да са еднакви на всички машини.",
     "Yes": "Да",

gui/lang-da.json

@@ -38,6 +38,7 @@
     "Idle": "Inaktiv",
     "Ignore Permissions": "Ignorér filrettigheder",
     "Keep Versions": "Behold versioner",
+    "Last seen": "Last seen",
     "Latest Release": "Seneste udgivelse",
     "Local Discovery": "Lokal opslag",
     "Local Discovery Port": "Lokal opslagsport",
@@ -45,7 +46,10 @@
     "Master Repo": "Hovedlagring",
     "Max File Change Rate (KiB/s)": "Højeste filændringshastighed (KiB/s)",
     "Max Outstanding Requests": "Parallelitet",
+    "Maximum Age": "Maximum Age",
+    "Never": "Never",
     "No": "Nej",
+    "No File Versioning": "No File Versioning",
     "Node ID": "Node ID",
     "Node Identification": "Node identifikation",
     "Node Name": "Nodenavn",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Udgående hastighedsbegrænsning (KiB/s)",
     "Override Changes": "Overskriv ændringer",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sti til lagring på din lokale computer. Hvis biblioteket ikke findes vil det blive oprettet. Tegnet tilde (~) kan bruges som genvej til",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Vent venligst",
     "Preview Usage Report": "Forhåndsvisning af forbrugsrapport",
     "RAM Utilization": "RAM-forbrug",
@@ -65,6 +70,7 @@
     "Repository Master": "Hovedlagring",
     "Repository Path": "Sti til lagring",
     "Rescan": "Rescan",
+    "Rescan Interval": "Rescan Interval",
     "Rescan Interval (s)": "Genscanningsinterval (s)",
     "Restart": "Genstart",
     "Restart Needed": "Programmet kræver genstart",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
     "Shutdown": "Luk ned",
+    "Simple File Versioning": "Simple File Versioning",
     "Source Code": "Kildekode",
+    "Staggered File Versioning": "Staggered File Versioning",
     "Start Browser": "Start browser",
     "Stopped": "Stoppet",
     "Support / Forum": "Support / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Den krypterede forbrugsrapport sendes dagligt. Den benyttes til at spore anvendte platforme, lagringsstørrelser og versioner.  Hvis det typen af opsamlet data ændres på et senere tidspunkt, vil du blive spurgt om tilladelse igen.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det indtastede node ID ser ikke gyldigt ud. Det skal være en 52 tegn streng, bestående af tal og bogstaver, eventuelt med mellemrum og bindestreger.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det indtastede node ID ser ikke gyldigt ud. Det skal være en 52 eller 56 tegn streng, bestående af tal og bogstaver, eventuelt med mellemrum og bindestreger.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "Node-ID'et kan ikke være blankt.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Node-ID'et som skal bruges her, kan du finde i \"Rediger > Vis ID\"-dialogen på den anden node. Mellemrum og bindestreg er valgfri (ignoreres).",
     "The number of old versions to keep, per file.": "Antallet af gamle versioner som gemmes, per fil.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Lagrings-ID'et skal være en kort identificierende streng (64 karaktere eller mindre) bestående af bogstav-, tal-, punktum- (.), bindestreg- (-) og understregskaraktere (_).",
     "The repository ID must be unique.": "Lagrings-ID'et skal være unikt.",
     "The repository path cannot be blank.": "Lagringsstien kan ikke være blank.",
+    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
     "Unknown": "Ukendt",
     "Up to Date": "Fuldt opdateret",
     "Upgrade To {%version%}": "Opgradér til {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Anvend komprimering",
     "Use HTTPS for GUI": "Anvend HTTPS til GUI adgang",
     "Version": "Version",
+    "Versions Path": "Versions Path",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Når du tilføjer en ny node skal du huske, at den også skal tilføjes på den anden side.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Når du tilføjer en ny node skal du huske, at lagrings-ID'et bliver brugt til at knytte noder sammen. De er følsomme for store og små bogstaver og skal matche på alle noder.",
     "Yes": "Ja",

gui/lang-de.json

@@ -17,7 +17,7 @@
     "Disconnected": "Verbindung getrennt",
     "Documentation": "Dokumentation",
     "Download Rate": "Downloadgeschwindigkeit",
-    "Edit": "Bearbeiten",
+    "Edit": "Einstellungen bearbeiten",
     "Edit Node": "Knoten bearbeiten",
     "Edit Repository": "Verzeichnis ändern",
     "Enable UPnP": "UPnP aktivieren",
@@ -38,6 +38,7 @@
     "Idle": "Untätig",
     "Ignore Permissions": "Berechtigungen ignorieren",
     "Keep Versions": "Versionen erhalten",
+    "Last seen": "Zuletzt online",
     "Latest Release": "Letzte Veröffentlichung",
     "Local Discovery": "Lokale Auffindung",
     "Local Discovery Port": "Lokaler Aufindungsport",
@@ -45,7 +46,10 @@
     "Master Repo": "Originalverzeichnis",
     "Max File Change Rate (KiB/s)": "Maximale Datenänderungsrate (KiB/s)",
     "Max Outstanding Requests": "Max. ausstehende Anfragen",
+    "Maximum Age": "Höchstalter",
+    "Never": "Nie",
     "No": "Nein",
+    "No File Versioning": "Keine Dateiversionierung",
     "Node ID": "Knoten-ID",
     "Node Identification": "Knoten Identifikation",
     "Node Name": "Knoten-Name",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Ausgehendes Datenratelimit (KiB/s)",
     "Override Changes": "Änderungen überschreiben",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pfad zum Verzeichnis auf dem lokalen Rechner. Wird erzeugt, wenn es nicht existiert. Das Tilden-Zeichen (~)  kann als Abkürzung benutzt werden für",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Pfad in dem die Versionen gespeichert werden sollen (ohne Angabe wird der Ordner .stversions im Verzeichnis verwendet).",
     "Please wait": "Bitte warten",
     "Preview Usage Report": "Vorschau des Nutzungsberichts",
     "RAM Utilization": "Verwendeter Arbeitsspeicher",
@@ -64,7 +69,8 @@
     "Repository ID": "Verzeichnis-ID",
     "Repository Master": "Originalverzeichnis",
     "Repository Path": "Pfad zum Verzeichnis",
-    "Rescan": "Erneut suchen",
+    "Rescan": "Überprüfen",
+    "Rescan Interval": "Suchintervall",
     "Rescan Interval (s)": "Suchintervall (s)",
     "Restart": "Neustart",
     "Restart Needed": "Neustart notwendig",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Wird anstatt der Knoten-ID im Verbunds-Status angezeigt. Wird als optionaler Standardname an andere Knoten bekannt gegeben.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Wird anstatt der Knoten-ID im Verbunds-Status angezeigt. Wird auf den Namen aktualisiert, den der Knoten angibt.",
     "Shutdown": "Herunterfahren",
+    "Simple File Versioning": "Einfache Dateiversionierung",
     "Source Code": "Sourcecode",
+    "Staggered File Versioning": "Stufenweise Dateiversionierung",
     "Start Browser": "Starte Browser",
     "Stopped": "Gestoppt",
     "Support / Forum": "Support / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Der verschlüsselte Benutzungsbericht wird täglich gesendet. Er wird benutzt um Statistiken über verwendete Betriebssysteme, Verzeichnis-Größen und Programm-Versionen zu erstellen. Sobald der Bericht in Zukunft weitere Daten erfasst, wird dir dieses Fenster erneut angezeigt.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Die eingegebene Knoten-ID scheint nicht gültig zu sein. Sie sollte eine 52 Stellen lange Zeichenkette aus Buchstaben und Zahlen sein. Leerzeichen und Striche sind optional (werden ignoriert).",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Die eingegebene Knoten-ID scheint nicht gültig zu sein. Es sollte eine 52 oder 56 stellige Zeichenkette aus Buchstaben und Nummern sein. Leerzeichen und Bindestriche sind optional.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Es wird in folgenden Abständen versioniert: in der ersten Stunde wird alle 30 Sekunden eine Version behalten, am ersten Tag eine jede Stunde, in den ersten 30 Tagen eine jeden Tag, danach wird bis zum Höchstalter eine Version pro Woche beibehalten.",
+    "The maximum age must be a number and cannot be blank.": "Das Höchstalter muss angegeben werden und eine Zahl sein.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Die längste Zeit, die alte Versionen vorgehalten werden (in Tagen, 0 bedeutet, alte Versionen für immer zu behalten).",
     "The node ID cannot be blank.": "Die Knoten-ID darf nicht leer sein.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Die hier einzutragende Knoten-ID kann im \"Bearbeiten > Zeige ID\"-Dialog auf dem anderen Knoten gefunden werden. Leerzeichen und Striche sind optional (werden ignoriert).",
     "The number of old versions to keep, per file.": "Anzahl der alten Versionen, die von jeder Datei gespeichert werden sollen.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Die Verzeichnis-ID muss eine kurze Kennung (64 Zeichen oder weniger) sein. Sie kann aus Buchstaben, Zahlen und den Punkt- (.), Strich- (-), und Unterstrich- (_) Zeichen bestehen.",
     "The repository ID must be unique.": "Die Verzeichnis-ID muss eindeutig sein.",
     "The repository path cannot be blank.": "Der Verzeichnis-Pfad kann nicht leer sein",
+    "The rescan interval must be at least 5 seconds.": "Das Suchintervall muss mindestens 5 Sekunden betragen.",
     "Unknown": "Unbekannt",
     "Up to Date": "Aktuell",
     "Upgrade To {%version%}": "Upgrade auf {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Benutze Komprimierung",
     "Use HTTPS for GUI": "Benutze HTTPS für Benutzeroberfläche",
     "Version": "Version",
+    "Versions Path": "Versionierungspfad",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Alte Versionen werden automatisch gelöscht wenn sie älter als das angegebene Höchstalter sind oder die Höchstzahl der Dateien pro Zeitabschnitt überschritten wird.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Beachte beim Hinzufügen eines neuen Knotens, dass dieser Knoten auch auf der Gegenseite hinzugefügt werden muss.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Beim Hinzufügen eines neuen Verzeichnisses, beachte dass die Verzeichnis-ID dazu verwendet wird, Verzeichnisse zwischen Knoten zu verbinden. Die ID muss also auf allen Knoten gleich sein, Groß- und Kleinschreibung muss dabei beachtet werden.",
     "Yes": "Ja",

gui/lang-el.json

@@ -38,6 +38,7 @@
     "Idle": "Ανενεργό",
     "Ignore Permissions": "Αγνόησε Δικαιώματα",
     "Keep Versions": "Διατήρησε Εκδόσεις",
+    "Last seen": "Last seen",
     "Latest Release": "Τελευταία Έκδοση",
     "Local Discovery": "Τοπική Ανεύρεση",
     "Local Discovery Port": "Port Τοπικής Ανεύρεσης",
@@ -45,7 +46,10 @@
     "Master Repo": "Master Repo",
     "Max File Change Rate (KiB/s)": "Max File Change Rate (KiB/s)",
     "Max Outstanding Requests": "Max Outstanding Requests",
+    "Maximum Age": "Maximum Age",
+    "Never": "Never",
     "No": "Αριθμός",
+    "No File Versioning": "No File Versioning",
     "Node ID": "ID Κόμβου",
     "Node Identification": "Ταυτοποίηση Κόμβου",
     "Node Name": "Όνομα Κόμβου",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
     "Override Changes": "Override Changes",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Μονοπάτι του αποθετηρίου στον τοπικό υπολογιστή. Σε περίπτωση που δεν υπάρχει, θα δημιουργηθεί. Ο χαρακτήρας tilde (~) μπορεί να χρησιμοποιηθεί σαν συντόμευση για",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Παρακαλώ περιμένετε",
     "Preview Usage Report": "Προεπισκόπηση αναφοράς χρήσης",
     "RAM Utilization": "Χρήση RAM",
@@ -65,6 +70,7 @@
     "Repository Master": "Repository Master",
     "Repository Path": "Μονοπάτι Αποθετηρίου",
     "Rescan": "Rescan",
+    "Rescan Interval": "Rescan Interval",
     "Rescan Interval (s)": "Χρονικό διάστημα Επανασάρρωσης (s)",
     "Restart": "Επανεκκίνηση",
     "Restart Needed": "Απαιτείται Επανεκκίνηση",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
     "Shutdown": "Απενεργοποίηση",
+    "Simple File Versioning": "Simple File Versioning",
     "Source Code": "Πηγαίος Κώδικας",
+    "Staggered File Versioning": "Staggered File Versioning",
     "Start Browser": "Έναρξη Φυλλομετρητή",
     "Stopped": "Απενεργοποιημένο",
     "Support / Forum": "Υποστήριξη / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Η κρυπτογραφημένη αναφοράς χρήσης στέλνεται καθημερινά. Χρησιμοποιείται ανίχνευση πληροφοριών πλατφόρμας, μεγέθους αποθετηρίων και εκδόσεων της εφαρμογής. Αν τα δεδομένα που αποστέλονται αλλάξουν, θα πληροφορηθείτε ξανά με αυτό το διάλογο.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Το ID Κόμβου που έχει εισαχθεί δεν είναι σωστό. Θα πρέπει να είναι αλφαριθμητικό 52 χαρακτήρων που να αποτελείται από γράμματα και αριθμούς, όπου τα κενά και οι παύλες είναι προαιρετικά.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Το ID Κόμβου δεν είναι έγκυρο. Θα πρέπει να είναι αλφαριθμιτικό με 52 ή 56 χαρακτήρες και να αποτελείται από γράμματα και αριθμούς, που προαιρετικά χωρίζονται με κενά και παύλες.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "Το ID Κόμβου δε μπορεί να είναι κενό.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Το ID Κόμβου μπορείτε να βρείτε στο μενού \"Επεξεργασία > Εμφάνιση ID\" του άλλου κόμβου. Κενά και παύλες είναι προαιρετικά (αγνοούνται).",
     "The number of old versions to keep, per file.": "The number of old versions to keep, per file.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.",
     "The repository ID must be unique.": "Το ID Αποθετηρίου πρέπει να είναι μοναδικό.",
     "The repository path cannot be blank.": "Το μονοπάτι του αποθετηρίου δε μπορεί να είναι κενό.",
+    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
     "Unknown": "Άγνωστο",
     "Up to Date": "Ενημερωμένος",
     "Upgrade To {%version%}": "Αναβάθμιση στην έκδοση {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Χρήση συμπίεσης",
     "Use HTTPS for GUI": "Χρήση HTTPS για το GUI",
     "Version": "Έκδοση",
+    "Versions Path": "Versions Path",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Προσθέτοντας έναν καινούργιο κόμβο, θυμηθείται πως θα πρέπει να προσθέσετε και τον παρόν κόμβο στην άλλη πλευρά.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Κατά την πρόσθεση νέου αποθετηρίου, να γνωρίζεται πως το ID Αποθετηρίου χρησιμοποιείται για να συνδέει Αποθετήρια μεταξύ κόμβων. Τα ID είναι case sensitive και θα πρέπει να είναι ταυτόσημα μεταξύ όλων των κόμβων.",
     "Yes": "Ναι",

gui/lang-es.json

@@ -38,6 +38,7 @@
     "Idle": "Inactivo",
     "Ignore Permissions": "Ignorar permisos",
     "Keep Versions": "Conservar versiones",
+    "Last seen": "Last seen",
     "Latest Release": "Última versión",
     "Local Discovery": "Búsqueda en red local",
     "Local Discovery Port": "Puerto de búsqueda de red local",
@@ -45,7 +46,10 @@
     "Master Repo": "Repositorio maestro",
     "Max File Change Rate (KiB/s)": "Tasa máxima de cambios (KiB/s)",
     "Max Outstanding Requests": "Cantidad máxima de peticiones pendientes",
+    "Maximum Age": "Maximum Age",
+    "Never": "Never",
     "No": "No",
+    "No File Versioning": "No File Versioning",
     "Node ID": "Nodo ID",
     "Node Identification": "Identificador del nodo",
     "Node Name": "Nodo nombre",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Tasa máxima de envío (KiB/s)",
     "Override Changes": "Reemplazar los cambios",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta del repositorio en el equipo local. La carpeta sera creada si no existe. El carácter tilde (~) puede ser utilizado como atajo de ",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Aguarde por favor",
     "Preview Usage Report": "Ver reporte de uso",
     "RAM Utilization": "Utilización de RAM",
@@ -65,6 +70,7 @@
     "Repository Master": "Repositorio maestro",
     "Repository Path": "Ruta del repositorio",
     "Rescan": "Rescan",
+    "Rescan Interval": "Rescan Interval",
     "Rescan Interval (s)": "Intervalo de reescaneo (s)",
     "Restart": "Reiniciar",
     "Restart Needed": "Es necesario reiniciar",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
     "Shutdown": "Apagar",
+    "Simple File Versioning": "Simple File Versioning",
     "Source Code": "Código fuente",
+    "Staggered File Versioning": "Staggered File Versioning",
     "Start Browser": "Iniciar navegador",
     "Stopped": "Parado",
     "Support / Forum": "Soporte / Foro",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "El reporte de uso se envía encriptado diariamente. Se utiliza para hacer un seguimiento de plataformas comunes, tamaño de repositorios y versión de aplicaciones. Si el conjunto de datos cambia sera notificado mediante este dialogo nuevamente.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "El ID de nodo ingresado no es valido. Debe ser una cadena  de al menos 52 caracteres consistente en letras y números, con espacios y guiones opcionales.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "El ID de nodo ingresado no es valido. Debe ser una cadena de 52 o de 56 caracteres consistente en letras y números, con espacios y guiones opcionales.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "El ID de nodo no puede estar vacío.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "El ID de nodo a ingresar aquí puede verse en la opción de menú \"Edición > Mostrar ID\" del otro nodo. Espacios y guiones son opcionales (ignorados).",
     "The number of old versions to keep, per file.": "El numero de versiones anteriores a conservar, por archivo.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "El ID de repositorio debe ser una cadena corta (64 caracteres o menos) consistente solamente en letras, números, punto (.), guion (-) y guion bajo (_).",
     "The repository ID must be unique.": "El ID de repositorio debe ser único.",
     "The repository path cannot be blank.": "La ruta del repositorio no puede estar vacía.",
+    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
     "Unknown": "Desconocido",
     "Up to Date": "Actualizado",
     "Upgrade To {%version%}": "Actualizar a {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Usar compresión",
     "Use HTTPS for GUI": "Usar HTTPS para la GUI",
     "Version": "Versión",
+    "Versions Path": "Versions Path",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Al agregar un nuevo nodo, recuerde que este nodo debe ser agregado en el otro lado también.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Al agregar un nuevo repositorio, tenga en mente que el ID de repositorio se utiliza para ligar los repositorios entre nodos. Distingue mayúsculas y minúsculas y debe ser exactamente igual en todos los nodos.",
     "Yes": "Si",

gui/lang-fr.json

@@ -38,6 +38,7 @@
     "Idle": "Au repos",
     "Ignore Permissions": "Ignorer les permissions",
     "Keep Versions": "Conserver les versions",
+    "Last seen": "Dernière appartition",
     "Latest Release": "Dernière version",
     "Local Discovery": "Recherche locale",
     "Local Discovery Port": "Port de recherche locale",
@@ -45,7 +46,10 @@
     "Master Repo": "Dossier maître",
     "Max File Change Rate (KiB/s)": "Débit maximum de changement de fichier (KiB/s)",
     "Max Outstanding Requests": "Nombre maximum de demandes concurrentes de blocs de fichier",
+    "Maximum Age": "Ancienneté maximum",
+    "Never": "Jamais",
     "No": "Non",
+    "No File Versioning": "Pas de version de fichier",
     "Node ID": "ID du nœud",
     "Node Identification": "Identification du nœud",
     "Node Name": "Nom du nœud",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limite du débit sortant (KiB/s)",
     "Override Changes": "Écraser les changements",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Chemin du répertoire sur l'ordinateur local. Il sera créé si il n'existe pas. Le caractère tilde (~) peut être utilisé comme raccourci vers",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Merci de patienter",
     "Preview Usage Report": "Aperçu du rapport de statistiques d'utilisation",
     "RAM Utilization": "Utilisation de la RAM",
@@ -64,7 +69,8 @@
     "Repository ID": "ID du répertoire",
     "Repository Master": "Répertoire maître",
     "Repository Path": "Chemin du répertoire",
-    "Rescan": "Rescan",
+    "Rescan": "Rescanner",
+    "Rescan Interval": "Intervalle de scan",
     "Rescan Interval (s)": "Intervalle de rescan (s)",
     "Restart": "Redémarrer",
     "Restart Needed": "Redémarrage nécessaire",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
     "Shutdown": "Éteindre",
+    "Simple File Versioning": "Versions simples de fichier",
     "Source Code": "Code source",
+    "Staggered File Versioning": "Versions échelonnées de fichier",
     "Start Browser": "Démarrer le navigateur web",
     "Stopped": "Arrêté",
     "Support / Forum": "Aide / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Le rapport d'utilisation chiffré est envoyé quotidiennement. Il sert à répertorier les plateformes utilisées, la taille des répertoires et les versions de l'application. Si le jeu de données rapportées devait être changé, il vous sera demandé de le valider de nouveau via ce dialogue.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID du nœud ne semble pas être valide. Il devrait ressembler à une chaine de 52 caractères comprenant lettres et chiffres, avec des espaces et des traits d'union optionnels.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID du nœud inséré ne semble pas être valide. Il devrait ressembler à une chaîne de 52 ou 56 comprenant lettres et chiffres, avec des espaces et des traits d'union optionnels.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "L'ancienneté maximum doit être un nombre et ne peut être vide.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "L'ID du nœud ne peut être vide.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "L'ID du nœud à insérer peut être trouvé à travers le menu \"Éditer > Montrer l'ID\" des autres nœuds. Les espaces et les traits d'union sont optionnels (ils seront ignorés).",
     "The number of old versions to keep, per file.": "Le nombre d'anciennes versions à garder, par fichier.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "L'ID du répertoire doit être un identifiant court (64 caractères ou moins) comprenant des lettres, nombres, points (.), trait d'union (-) et tiret bas (_).",
     "The repository ID must be unique.": "L'ID du répertoire doit être unique.",
     "The repository path cannot be blank.": "Le chemin du répertoire ne peut pas être vide.",
+    "The rescan interval must be at least 5 seconds.": "L'intervalle de scan doit être d'au minimum 5 secondes.",
     "Unknown": "Inconnu",
     "Up to Date": "Synchronisation à jour",
     "Upgrade To {%version%}": "Upgrader vers {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Utiliser la compression",
     "Use HTTPS for GUI": "Utiliser l'HTTPS pour le GUI",
     "Version": "Version",
+    "Versions Path": "Emplacement des versions",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les versions sont supprimées automatiquement si celles-ci sont plus anciennes que l'ancienneté maximum ou que leur nombre est supérieur au nombre autorisé dans une intervale.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Lorsqu'un nœud est ajouté, gardez à l'esprit que ce nœud doit aussi être ajouté de l'autre coté.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Lorsqu'un nouveau répertoire est ajouté, gardez à l'esprit que l'ID du répertoire est utilisé pour lier les répertoires à travers les nœuds. Ils sont sensibles à la casse et doivent être identiques à travers tous les nœuds.",
     "Yes": "Oui",

gui/lang-hu.json

@@ -38,6 +38,7 @@
     "Idle": "Tétlen",
     "Ignore Permissions": "Jogosultságok figyelmen kívül hagyása",
     "Keep Versions": "Verziók megtartása",
+    "Last seen": "Utoljára látva",
     "Latest Release": "Utolsó kiadás",
     "Local Discovery": "Helyi csomópont keresés",
     "Local Discovery Port": "Helyi csomópont keresés port-ja",
@@ -45,7 +46,10 @@
     "Master Repo": "Központi tároló",
     "Max File Change Rate (KiB/s)": "Maximális file változás sebessége (KiB/mp)",
     "Max Outstanding Requests": "Maximális kimenő kérés",
+    "Maximum Age": "Maximális kor",
+    "Never": "Soha",
     "No": "Nem",
+    "No File Versioning": "Nincs file verziózás",
     "Node ID": "Csomópont azonosító",
     "Node Identification": "Csomópont azonosítás",
     "Node Name": "Csomópont név",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Kimenő sávszélesség (KiB/mp)",
     "Override Changes": "Változtatások felülbírálása",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "A tároló útvonala ezen a számítógépen. Amennyiben nem létezik automatikusan létrehozzuk. A hullámvonal (~) karakter használható a rövidítésre",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Az útvonal ahol a régi verziókat tároljuk (ha üresen hagyod akkor .stversions mappa lesz a neve).",
     "Please wait": "Kérem várj",
     "Preview Usage Report": "Felhasználási adatok átnézése",
     "RAM Utilization": "Memória használat",
@@ -65,6 +70,7 @@
     "Repository Master": "Központi tároló",
     "Repository Path": "Tároló útvonala",
     "Rescan": "Újraátvizsgálás",
+    "Rescan Interval": "Átnézési intervallum",
     "Rescan Interval (s)": "Átnézési intervallum (mp)",
     "Restart": "Újraindítás",
     "Restart Needed": "Újraindítás szükséges",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "A csomópont azonosító helyett jelenik meg a fürtben a státusznál. A csomópontoknak ez is hirdetve lesz, mint opcionális alapértelmezett név.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "A csomópont azonosító helyett jelenik meg a fürtben a státusznál. A csomópont neve a hirdetettre lesz llítva amennyiben az üresen van hagyva.",
     "Shutdown": "Leállítás",
+    "Simple File Versioning": "Egyszerű file verziózás",
     "Source Code": "Forráskód",
+    "Staggered File Versioning": "Többszintű file verziózás",
     "Start Browser": "Böngésző indítása",
     "Stopped": "Leállítva",
     "Support / Forum": "Támogatás / Fórum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "A titkosított felhasználási jelentés naponta kerül elküldésre. Arra használjuk, hogy a futtató platformot, tároló méreteket illetve program verziókat kövessük nyomon. Amennyiben ez változik akkor újra meg fog jelenni ez az ablak.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "A beírt csomópont azonosító nem tűnik megfelelőnek. 52 karakter hosszúnak kell lennie és csak számokat illetve betűket tartalmazhat, amit szóközök illetve kötőjelek tagolhatnak.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "A beírt csomópont azonosító nem tűnik megfelelőnek. 52 vagy 56 karakteresnek kell lennie csak számot és betűt kell tartalmaznia és szóközökkel vagy kötőjelekkel lehet tagolva.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "A következő intervallumokat használjuk: egy-egy régi verziót őrzünk meg az első órában minden 30 másodpercben, az első nap minden órában, az első 30 napban minden nap, egészen addig amíg el nem érjük a maximálisan megtartható verziók számát minden héten.",
+    "The maximum age must be a number and cannot be blank.": "A maximális kornak számnak kell lenni és nem lehet üres",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "A verziók megtartásának maximális ideje (napokban, ha 0-t adsz meg örökre megmaradnak).",
     "The node ID cannot be blank.": "A csomópont azonosító nem lehet üres",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "A csomópont azonosító a túloldalon a \"Beállítások > Azonosító mutatása\" alatt található. A szóközök illetve a kötőjelek opcionálisak (kihagyhatóak). ",
     "The number of old versions to keep, per file.": "Mennyi régi változatot tartsunk meg a file-okból",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "A tároló azonosító egy rövid (maximálisan 64 karakteres) csak számokat, betűket, pontot (.), kötőjelet (-) illetve aláhúzást (_) tartalmazó karakterlánc",
     "The repository ID must be unique.": "A tároló azonosítónak egyedinek kell lennie",
     "The repository path cannot be blank.": "A tároló útvonala nem lehet üres",
+    "The rescan interval must be at least 5 seconds.": "Az átnézési intervallumbak legalább 5 másodpercnek kell lennie.",
     "Unknown": "Ismeretlen",
     "Up to Date": "Friss",
     "Upgrade To {%version%}": "Frissítés a {{version}} verzióra",
@@ -115,6 +127,8 @@
     "Use Compression": "Tömörítés használata",
     "Use HTTPS for GUI": "HTTPS használata a GUI-hoz",
     "Version": "Verzió",
+    "Versions Path": "Verziók útvonala",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "A régi verziók automatikusan törlődnek, amennyiben öregebbek mint a maximum kor, vagy már több van belőlük mint az adott intervallumban megtartható maximum.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Amikor új csomópontot adsz hozzá, tartsd észben, hogy azt a túloldalhoz is hozzá kell majd adni.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Amikor hozzáadod a tárolót, tartsad észben, hogy a Tároló azonosító az ami összeköti a csomópontokat. Kis-nagybetű érzékeny, és pontosan ugyan úgy kell azokat megadni mindegyik csomóponton.",
     "Yes": "Igen",

gui/lang-it.json

@@ -37,7 +37,8 @@
     "Global Repository": "Deposito Globale",
     "Idle": "Inattivo",
     "Ignore Permissions": "Ignora Permessi",
-    "Keep Versions": "Mantieni le Versioni",
+    "Keep Versions": "Versioni Mantenute",
+    "Last seen": "Last seen",
     "Latest Release": "Ultima Versione",
     "Local Discovery": "Individuazione Locale",
     "Local Discovery Port": "Porta di Individuazione Locale",
@@ -45,7 +46,10 @@
     "Master Repo": "Deposito Principale",
     "Max File Change Rate (KiB/s)": "Tasso Massimo di Cambiamento dei File (KiB/s)",
     "Max Outstanding Requests": "Numero Massimo di Richieste Simultanee per i Blocchi di File",
+    "Maximum Age": "Durata Massima",
+    "Never": "Never",
     "No": "No",
+    "No File Versioning": "Nessun Controllo Versione",
     "Node ID": "ID Nodo",
     "Node Identification": "Identificazione Nodo",
     "Node Name": "Nome Nodo",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limite di Velocità in Uscita (KiB/s)",
     "Override Changes": "Ignora Modifiche",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Percorso del deposito nel computer locale. Verrà creato se non esiste già. Il carattere tilde (~) può essere utilizzato come scorciatoia per",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Attendere prego",
     "Preview Usage Report": "Anteprima Statistiche di Utilizzo",
     "RAM Utilization": "Utilizzo RAM",
@@ -64,7 +69,8 @@
     "Repository ID": "ID Deposito",
     "Repository Master": "Deposito Principale",
     "Repository Path": "Percorso del Deposito",
-    "Rescan": "Rescan",
+    "Rescan": "Riscansiona",
+    "Rescan Interval": "Intervallo di Scansione",
     "Rescan Interval (s)": "Intervallo di Scansione dei File (s)",
     "Restart": "Riavvia",
     "Restart Needed": "Riavvio Necessario",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
     "Shutdown": "Arresta",
+    "Simple File Versioning": "Controllo Versione Semplice",
     "Source Code": "Codice Sorgente",
+    "Staggered File Versioning": "Controllo Versione Cadenzato",
     "Start Browser": "Avvia Browser",
     "Stopped": "Fermato",
     "Support / Forum": "Supporto / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Quotidianamente il software invia le statistiche di utilizzo in forma criptata. Questi dati riguardano i sistemi operativi utilizzati, le dimensioni dei depositi e le versioni del software. Se i dati riportati cambiano verrà mostrata di nuovo questa finestra di dialogo.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID del nodo inserito non sembra valido. Dovrebbe essere una stringa di 52 caratteri costituita da lettere e numeri, con spazi e trattini opzionali.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID del nodo inserito non sembra valido. Dovrebbe essere una stringa di 52 o 56 caratteri costituita da lettere e numeri, con spazi e trattini opzionali.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "La durata massima dev'essere un numero e non può essere vuoto.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "L'ID del nodo non può essere vuoto.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Trova l'ID nella finestra di dialogo \"Modifica > Mostra ID\" dell'altro nodo, poi inseriscilo qui. Gli spazi e i trattini sono opzionali (ignorati).",
     "The number of old versions to keep, per file.": "Il numero di vecchie versioni da mantenere, per file.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "L'ID del deposito dev'essere un identificatore breve (64 caratteri o meno) costituito solamente da lettere, numeri, punti (.), trattini (-) e trattini bassi (_).",
     "The repository ID must be unique.": "L'ID del deposito dev'essere unico.",
     "The repository path cannot be blank.": "Il percorso del deposito non può essere vuoto.",
+    "The rescan interval must be at least 5 seconds.": "L'intervallo di scansione non può essere inferiore a 5 secondi.",
     "Unknown": "Sconosciuto",
     "Up to Date": "Sincronizzato",
     "Upgrade To {%version%}": "Aggiorna Alla {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Utilizza Compressione",
     "Use HTTPS for GUI": "Utilizza HTTPS per l'interfaccia grafica",
     "Version": "Versione",
+    "Versions Path": "Percorso Cartella delle Versioni",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Le versioni vengono eliminate automaticamente se superano la durata massima o il numero di file permessi in un determinato intervallo temporale.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Ora la stessa operazione deve essere eseguita anche nel nuovo nodo inserendo l'ID di questo nodo.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Quando aggiungi un nuovo deposito ricordati che gli ID vengono utilizzati per collegare i depositi nei nodi. Distinguono maiuscole e minuscole e devono corrispondere esattamente su tutti i nodi.",
     "Yes": "Sì",

gui/lang-lt.json

@@ -38,6 +38,7 @@
     "Idle": "Laisvas",
     "Ignore Permissions": "Nepaisyti failų prieigos leidimų",
     "Keep Versions": "Saugojamų versijų kiekis",
+    "Last seen": "Paskutinį kartą matytas",
     "Latest Release": "Paskutinė versija",
     "Local Discovery": "Vietinis matomumas",
     "Local Discovery Port": "Vietinio matomumo jungtis",
@@ -45,7 +46,10 @@
     "Master Repo": "Pagrindinė saugykla",
     "Max File Change Rate (KiB/s)": "Maksimalus failų apsikeitimo greitis (KiB/s)",
     "Max Outstanding Requests": "Maksimalus išeinančių užklausų skaičius",
+    "Maximum Age": "Maksimalus amžius",
+    "Never": "Niekada",
     "No": "Ne",
+    "No File Versioning": "Nėra versijų valdymo",
     "Node ID": "Mazgo vardas",
     "Node Identification": "Mazgo tapatybė",
     "Node Name": "Mazgo vardas",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Išeinančio srauto maksimalus greitis (KiB/s)",
     "Override Changes": "Perrašyti pakeitimus",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Kelias iki vietinės saugyklos.  Tildės ženklas (~) gali būti naudojamas nuorodai",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Kelias iki papkės kur saugomos senesnės versijos (palikite tuščią norėdami naudoti .stversions)",
     "Please wait": "Prašome palaukti",
     "Preview Usage Report": "Vartojimo statistikos peržiūra",
     "RAM Utilization": "LKA panaudojimas",
@@ -65,6 +70,7 @@
     "Repository Master": "Pagrindinė saugykla",
     "Repository Path": "Kelias iki saugyklos",
     "Rescan": "Nuskaityti iš naujo",
+    "Rescan Interval": "Pertrauka tarp nuskaitymų",
     "Rescan Interval (s)": "Pertrauka tarp nuskaitymų (s)",
     "Restart": "Perleisti",
     "Restart Needed": "Reikalingas perleidimas",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Grupės būsenoje rodomas vietoje mazgo vardo. Kiti mazgai matys kaip pasirinktinį vardą.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Grupės būsenoje rodomas vietoje mazgo vardo. Bus atnaujintas į mazgo vardą jei nieko neįrašysite.",
     "Shutdown": "Išjungti",
+    "Simple File Versioning": "Supaprastintas versijų valdymas",
     "Source Code": "Išeities kodas",
+    "Staggered File Versioning": "Pakopinis versijų valdymas",
     "Start Browser": "Paleisti naršyklę",
     "Stopped": "Sustabdyta",
     "Support / Forum": "Palaikymas / Diskusijos",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Šifruota naudojimosi ataskaita siunčiama kasdien. Šiuo metu, ataskaitoje matosi tik operacinė sistema, saugyklos dydis ir programos versija. Jeigu ateityje bus siunčiama daugiau duomenų, jums vėl bus parodyta ši pranešimas.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Įvestas neteisingas mazgo vardas. Turi būti 52 simbolių eilutė su raidėmis ir skaičiais kuriuos galima atskirti tarpu arba brūkšneliu.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Įvestas neteisingas mazgo vardas. Turi būti 52 ar 56 simbolių eilutė su raidėmis ir skaičiais kuriuos galima atskirti tarpu arba brūkšneliu.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Šie pertraukų nustatymai naudojami: pirmą valandą versijos laikomos 30 sekundžių, pirmą dieną versijos laikomos valandą, pirmas 30 dienų versijos laikomos parą, kol nebus viršytas nustatytas maksimalus amžius.",
+    "The maximum age must be a number and cannot be blank.": "Maksimalus amžius  turi būti skaitmuo ir negali būti tuščias laukelis.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Maksimalus laikas kurį bus saugojama versija (dienomis, nustatykite 0 norėdami saugoti amžinai).",
     "The node ID cannot be blank.": "Mazgo vardas negali būti tuščias.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Mazgo vardas visada galima sužinoti apsilankius \"Edit > Show ID\". Tarpai ir brūkšneliai nebūtini (ignoruojami).",
     "The number of old versions to keep, per file.": "Kiek failo versijų saugoti.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Saugyklos vardas negali būti ilgesnis nei 64 simboliai. Galima naudoti tik raides ir skaičius bet tašką (.), brukšnelį (-) ir pabraukimą (_).",
     "The repository ID must be unique.": "Saugyklos vardas turi būti unikalus.",
     "The repository path cannot be blank.": "Kelias iki saugyklos negali būti tuščias.",
+    "The rescan interval must be at least 5 seconds.": "Nuskaityti galima nedažniau nei kas 5 sekundes.",
     "Unknown": "Velniava",
     "Up to Date": "Atnaujinta",
     "Upgrade To {%version%}": "Atnaujinti į  {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Naudoti suspaudimą",
     "Use HTTPS for GUI": "Valdymo skydeliui naudoti saugų ryšį ",
     "Version": "Versija",
+    "Versions Path": "Kelias iki versijos",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versijos ištrinamos jei senesnės už nustatyta maksimalų amžių arba jei viršytas maksimalus failų skaičius per nustatytą laiko tarpą.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Kai pridedate naują mazgą neužmirškite, kad kitame gale reikia sukonfigūruoti šį mazgą.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Kai įvedate naują saugyklą neužmirškite, kad ji bus naudojama visuose mazguose. Svarbu visur įvesti visiškai tokį pat saugyklos vardą neužmirštant apie didžiąsias ir mažąsias raides.",
     "Yes": "Taip",

gui/lang-nl.json

@@ -35,9 +35,10 @@
     "Global Discovery": "Globaal zoeken",
     "Global Discovery Server": "Globale zoekserver",
     "Global Repository": "Globale repository",
-    "Idle": "Klaar",
+    "Idle": "Inactief",
     "Ignore Permissions": "Rechten negeren",
     "Keep Versions": "Versies behouden",
+    "Last seen": "Last seen",
     "Latest Release": "Laatste uitgave",
     "Local Discovery": "Lokaal zoeken",
     "Local Discovery Port": "Lokaal zoeken-poort",
@@ -45,7 +46,10 @@
     "Master Repo": "Tegen veranderingen beschermen",
     "Max File Change Rate (KiB/s)": "Maximale bestands uitwisselsnelheid (KiB/s)",
     "Max Outstanding Requests": "Maximaal aantal openstaande aanvragen",
+    "Maximum Age": "Maximum leeftijd",
+    "Never": "Never",
     "No": "Nee",
+    "No File Versioning": "Geen versiebeheer",
     "Node ID": "Node ID",
     "Node Identification": "Node Identificatie",
     "Node Name": "Node naam",
@@ -57,14 +61,16 @@
     "Outgoing Rate Limit (KiB/s)": "Uitgaande snelheidslimiet (KiB/s)",
     "Override Changes": "Veranderingen overschrijven",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pad naar de repository op de lokale computer. Word aangemaakt indien deze niet bestaat. Het tilde (~) karakter kan gebruikt worden als afkorting voor",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Pad waar de verschillende versies opgeslagen dienen te worden (laat leeg voor de standaard map '.stversion' in de repository).",
     "Please wait": "Even geduld",
-    "Preview Usage Report": "Bekijk gebruikersstatistieken",
+    "Preview Usage Report": "Bekijk gebruiksstatistieken",
     "RAM Utilization": "RAM gebruik",
     "Reconnect Interval (s)": "Herverbind-interval (s)",
     "Repository ID": "Repository ID",
     "Repository Master": "Hoofd repository",
     "Repository Path": "Pad van repository",
     "Rescan": "Opnieuw scannen",
+    "Rescan Interval": "Scanfrequentie",
     "Rescan Interval (s)": "Herscan interval (s)",
     "Restart": "Herstart",
     "Restart Needed": "Herstart nodig",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "De node naam wordt getoond in plaats van de node ID in het cluster status overzicht. Deze naam wordt aan andere nodes voorgesteld als een optionele, standaardnaam.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "De node naam wordt getoond in plaats van de node ID in het cluster status overzicht. Deze naam wordt geüpdatet met de naam die de node zelf adverteert indien dit veld leeg wordt gelaten.",
     "Shutdown": "Sluit af",
+    "Simple File Versioning": "Eenvoudig versiebeheer",
     "Source Code": "Broncode",
+    "Staggered File Versioning": "Staggered File Versioning",
     "Start Browser": "Start browser",
     "Stopped": "Gestopt",
     "Support / Forum": "Support / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "De versleutelde gebruikers statistieken worden dagelijks verstuurd. Deze worden gebruikt om veelgebruikte platformen, repo groottes en app versies bij te houden. Als er nieuwe statistieken worden bijgehouden, wordt dit venster weer getoond.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Het ingevoerde node ID lijkt niet valide te zijn. Het moet een 52 karakter lange string zijn bestaande uit letters en cijfers, spaties en streepjes zijn optioneel.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Het ingevoerde node ID lijkt niet valide te zijn. Het moet een 52 of 56 karakter lange string zijn, bestaande uit letters en cijfers, spaties en streepjes zijn optioneel.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "De volgende intervallen worden gebruikt: het eerste uur worden versies iedere 30 seconden bewaard, de eerste dag worden versies ieder uur bewaard, de eerste 30 dagen worden versies iedere dag bewaard, tot de maximale leeftijd worden versies iedere week bewaard.",
+    "The maximum age must be a number and cannot be blank.": "De maximum leeftijd moet uit cijfers bestaan en mag niet leeggelaten worden.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "De maximale tijdsduur om een versie te bewaren (in dagen, gebruik 0 om versies voor altijd te bewaren).",
     "The node ID cannot be blank.": "Er moet een node ID ingevoerd worden",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Het node ID dat ingevoerd moet worden kan op de andere node gevonden via \"Bewerk > Toon ID\". Spaties en streepjes zijn toegestaan (worden genegeerd).",
     "The number of old versions to keep, per file.": "Het aantal versies dat bewaard moet worden per file.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Het repository ID moet een korte naam zijn (met 64 karakters of minder) en mag alleen bestaan uit cijfers, letters, punten (.), streepjes (-) en liggende streepjes (_). ",
     "The repository ID must be unique.": "Het repository ID moet uniek zijn.",
     "The repository path cannot be blank.": "Het repository ID moet ingevuld worden.",
+    "The rescan interval must be at least 5 seconds.": "De scanfrequentie moet minimaal 5 seconde zijn.",
     "Unknown": "Onbekend",
     "Up to Date": "Gesynchroniseerd",
     "Upgrade To {%version%}": "Upgrade naar {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Compressie gebruiken",
     "Use HTTPS for GUI": "Gebruik HTTPS voor de GUI",
     "Version": "Versie",
+    "Versions Path": "Bestandspad versies",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versies worden automatisch verwijderd als deze ouder zijn dan de maximale leeftijd of als ze het maximaal aantal toegestane bestanden per interval overschrijden. ",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Bedenk bij het toevoegen van een nieuwe node dat deze node ook toegevoegd moet worden aan de kant van de nieuwe node.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Bedenk bij het toevoegen van een nieuwe repository dat het repository ID de repositores met elkaar verbindt tussen de nodes. Ze zijn hoofdlettergevoelig en moeten exact dezelfde naam hebben op alle nodes.",
     "Yes": "Ja",

gui/lang-pt-PT.json

@@ -38,6 +38,7 @@
     "Idle": "Em espera",
     "Ignore Permissions": "Ignorar permissões",
     "Keep Versions": "Manter versões",
+    "Last seen": "Última vez que foi visto",
     "Latest Release": "Última versão",
     "Local Discovery": "Busca local",
     "Local Discovery Port": "Porto da busca local",
@@ -45,7 +46,10 @@
     "Master Repo": "Repositório mestre",
     "Max File Change Rate (KiB/s)": "Velocidade máxima de alterações de ficheiros (KiB/s)",
     "Max Outstanding Requests": "Número máximo de pedidos pendentes",
+    "Maximum Age": "Idade máxima",
+    "Never": "Nunca",
     "No": "Não",
+    "No File Versioning": "Sem gestão de versões de ficheiros",
     "Node ID": "ID do nó",
     "Node Identification": "Identificação do nó",
     "Node Name": "Nome do nó",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limite da velocidade de envio (KiB/s)",
     "Override Changes": "Sobrepor alterações",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para o repositório no computador local. Será criado se não existir. O carácter (~) pode ser utilizado como atalho para",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Caminho onde as versões são guardadas (deixe vazio para usar a pasta pré-definida .stversions no repositório).",
     "Please wait": "Aguarde",
     "Preview Usage Report": "Pré-visualizar relatório de utilização",
     "RAM Utilization": "Utilização da RAM",
@@ -65,6 +70,7 @@
     "Repository Master": "Repositório mestre",
     "Repository Path": "Caminho do repositório",
     "Rescan": "Voltar a varrer",
+    "Rescan Interval": "Intervalo entre varrimentos",
     "Rescan Interval (s)": "Intervalo entre varrimentos (s)",
     "Restart": "Reiniciar",
     "Restart Needed": "É preciso reiniciar",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Apresentado ao invés do ID do nó no estado do agrupamento. Será divulgado aos outros nós como um nome pré-definido opcional.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Apresentado ao invés do ID do nó no estado do agrupamento. Será actualizado para o nome que o nó divulga, se for deixado em branco.",
     "Shutdown": "Desligar",
+    "Simple File Versioning": "Gestão de versões de ficheiros simples",
     "Source Code": "Código fonte",
+    "Staggered File Versioning": "Gestão de versões de ficheiros aleatória",
     "Start Browser": "Iniciar navegador",
     "Stopped": "Parado",
     "Support / Forum": "Suporte / Fórum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "O relatório de utilização cifrado é enviado diariamente. É utilizado para seguir plataformas comuns, tamanhos de repositórios e versões da aplicação. Se o conjunto de dados do relatório for alterado, será notificado novamente através desta janela.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "O ID do nó indicado não parece ser válido. Deveria conter uma palavra de 52 caracteres constituída por letras e números, com espaços e traços opcionais. ",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "O ID do nó fornecido não parece ser válido. Deveria ser um texto com 52 ou 56 caracteres constituídos por letras e números, com espaços e traços opcionais.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "São utilizados os seguintes intervalos: na primeira hora é guardada uma versão a cada 30 segundos, no primeiro dia é guardada uma versão a cada hora, nos primeiros 30 dias é guardada uma versão por dia e, até que atinja a idade máxima, é guardada uma versão por semana.",
+    "The maximum age must be a number and cannot be blank.": "A idade máxima tem que ser um número e não pode estar vazia.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Tempo máximo para manter uma versão (em dias, usando 0 para manter a versão para sempre).",
     "The node ID cannot be blank.": "O ID do nó não pode estar vazio.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "O ID do nó a introduzir pode ser encontrado no diálogo \"Editar > Mostrar ID\" no outro nó. Espaços e traços são opcionais (ignorados).",
     "The number of old versions to keep, per file.": "O número de versões antigas a manter, por ficheiro.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "O ID do repositório tem que ser um identificador curto (64 caracteres ou menos) e consiste em letras, números e os caracteres ponto (.), traço (-) e (_).",
     "The repository ID must be unique.": "O ID do repositório tem que ser único.",
     "The repository path cannot be blank.": "O caminho do repositório não pode estar vazio.",
+    "The rescan interval must be at least 5 seconds.": "O intervalo de varrimento tem que ter pelo menos 5 segundos.",
     "Unknown": "Desconhecido",
     "Up to Date": "Actualizado",
     "Upgrade To {%version%}": "Actualizar para {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Usar compressão",
     "Use HTTPS for GUI": "Utilizar HTTPS na interface gráfica",
     "Version": "Versão",
+    "Versions Path": "Caminho das versões",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "As versões são eliminadas automaticamente se forem mais antigas do que a idade máxima ou excederem o número máximo de ficheiros permitido num intervalo.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Quando adicionar um novo nó, lembre-se que este nó tem que ser adicionado no outro lado também.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Quando adicionar um novo repositório, lembre-se que o ID do repositório é utilizado para juntar os repositórios entre nós. Os ID's são sensíveis às maiúsculas e minúsculas e têm que corresponder exactamente entre todos os nós.",
     "Yes": "Sim",

gui/lang-ru.json

@@ -38,6 +38,7 @@
     "Idle": "Бездействует",
     "Ignore Permissions": "Игнорировать файловые права доступа",
     "Keep Versions": "Количество хранимых версий",
+    "Last seen": "Last seen",
     "Latest Release": "Последняя версия",
     "Local Discovery": "Локальное обнаружение",
     "Local Discovery Port": "Порт локального обнаружения",
@@ -45,7 +46,10 @@
     "Master Repo": "Главный репозиторий",
     "Max File Change Rate (KiB/s)": "Максимальная скорость изменения файлов (KiB/s)",
     "Max Outstanding Requests": "Максимальное количество исходящих запросов",
+    "Maximum Age": "Максимальный срок",
+    "Never": "Never",
     "No": "Нет",
+    "No File Versioning": "Без управления версиями файлов",
     "Node ID": "ID Узла",
     "Node Identification": "Идентификация узла",
     "Node Name": "Имя Узла",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Предел скорости отдачи (KiB/s)",
     "Override Changes": "Перезаписать изменения",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Путь к репозиторию на локальном компьютере. Если не существует, то будет создан. Знак тильды (~) может использоваться как ссылка",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Путь, куда нужно сохранять версии (оставьте пустым для папки .stversions в репозитории).",
     "Please wait": "Пожалуйста, подождите",
     "Preview Usage Report": "Посмотреть отчёт об использовании",
     "RAM Utilization": "Использование ОЗУ",
@@ -64,7 +69,8 @@
     "Repository ID": "ID Репозитория",
     "Repository Master": "Главный Репозиторий",
     "Repository Path": "Путь к Репозиторию",
-    "Rescan": "Rescan",
+    "Rescan": "Пересканирование",
+    "Rescan Interval": "Интервал пересканирования",
     "Rescan Interval (s)": "Интервал между сканированием (сек)",
     "Restart": "Перезапуск",
     "Restart Needed": "Требуется перезапуск",
@@ -78,10 +84,12 @@
     "Short identifier for the repository. Must be the same on all cluster nodes.": "Короткий идентификатор репозитория. Должен быть одинаковый на всех узлах кластера.",
     "Show ID": "Показать ID",
     "Shown instead of Node ID in the cluster status.": "Отображается вместо ID узла в статусе кластера.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
+    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Показано вместо идентификатора узла в статусе кластера. Будет разглашено другим узлам в качестве дополнительного имени по умолчанию.",
+    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Показано вместо идентификатора узла в статусе кластера. Будет обновлено именем, разглашённым узлом, если оставлено пустым.",
     "Shutdown": "Выключить",
+    "Simple File Versioning": "Простое управление версиями файлов",
     "Source Code": "Исходный код",
+    "Staggered File Versioning": "Ступенчатое управление версиями файлов",
     "Start Browser": "Открыть браузер",
     "Stopped": "Остановлено",
     "Support / Forum": "Поддержка / Форум",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Зашифрованные отчёты об использовании отправляются ежедневно. Они используются для отслеживания проблем, размеров репозиториев и версий Syncthing. Если набор данных в отчёте будет изменён, то вы получите уведомление об этом в этом диалоге.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введённый ID узла выглядит неправильно: ID должен быть строкой, длинной 52 символа, обязательно содержащей группы букв и цифр которые могут быть разделены пробелами или тире.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введённый ID узла выглядит неправильно: ID должен быть строкой, длинной 52 или 56 символов, обязательно содержащей группы букв и цифр которые могут быть разделены пробелами или тире.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Используются следующие интервалы: в первый час версия меняется каждые 30 секунд, в первый день - каждый час, первые 30 дней - каждый день, после, до максимального срока - каждую неделю.",
+    "The maximum age must be a number and cannot be blank.": "Максимальный срок должен быть числом и не может быть пустым.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Максимальный срок хранения версии (в днях, 0 значит вечное хранение).",
     "The node ID cannot be blank.": "ID узла не может быть пустым.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "ID узла можно узнать в окне \"Редактировать > Показать ID\" на требуемом узле. Пробелы и тире используются для удобства и не обязательны (игнорируются).",
     "The number of old versions to keep, per file.": "Количество хранимых версий файла.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "ID репозитория должен быть коротким id (64 символа или меньше) состоящий только из букв, цифр,  точек (.), тире (-) и нижнего подчёркивания (_).",
     "The repository ID must be unique.": "ID Репозитория должен быть уникальным.",
     "The repository path cannot be blank.": "Путь к репозиторию не может быть пустым.",
+    "The rescan interval must be at least 5 seconds.": "Интервал пересканирования должен быть хотя бы 5 секунд.",
     "Unknown": "Неизвестно",
     "Up to Date": "Обновлено",
     "Upgrade To {%version%}": "Обновить до {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Использовать сжатие",
     "Use HTTPS for GUI": "Использовать HTTPS для панели управления",
     "Version": "Версия",
+    "Versions Path": "Путь к версиям",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версии удаляются автоматически, если они существуют дольше максимального срока или превышают разрешённое количество файлов за интервал.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Добавляя новый узел помните, что новый узел должен быть добавлен и на другой стороне.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Добавляя новый репозиторий помните, что ID репозитория используется для связи всех репозиториев между узлами. ID чувствительны к регистру и должны совпадать на всех узлах.",
     "Yes": "Да",

gui/lang-sv.json

@@ -38,6 +38,7 @@
     "Idle": "Vilande",
     "Ignore Permissions": "Ignorera filrättigheter",
     "Keep Versions": "Behåll versioner",
+    "Last seen": "Senast online",
     "Latest Release": "Senaste version",
     "Local Discovery": "Lokal uppslagning",
     "Local Discovery Port": "Lokal uppslagningsport",
@@ -45,7 +46,10 @@
     "Master Repo": "Huvudlagring",
     "Max File Change Rate (KiB/s)": "Högsta ändringshastighet (KiB/s)",
     "Max Outstanding Requests": "Paralellitet",
+    "Maximum Age": "Högsta åldersgräns",
+    "Never": "Aldrig",
     "No": "Nej",
+    "No File Versioning": "Ingen versionshantering",
     "Node ID": "Nod-ID",
     "Node Identification": "Nod-identifiering",
     "Node Name": "Nodnamn",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Utgående hastighetsbegränsning (KiB/s)",
     "Override Changes": "Skriv över ändringar",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sökväg till katalogen på din dator. Kommer att skapas om det inte finns. Tecknet tilde (~) kan användas som en genväg för",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Katalog där versioner sparas (lämna blankt för att använda .stversions i lagringskatalogen).",
     "Please wait": "Var god vänta",
     "Preview Usage Report": "Förhandsgranska statistik",
     "RAM Utilization": "Minnesanvändning",
@@ -64,8 +69,9 @@
     "Repository ID": "Lagrings-ID",
     "Repository Master": "Huvudlagring",
     "Repository Path": "Lagringskatalog",
-    "Rescan": "Scanna om",
-    "Rescan Interval (s)": "Förnyelseintervall (s)",
+    "Rescan": "Uppdatera",
+    "Rescan Interval": "Uppdateringsintervall",
+    "Rescan Interval (s)": "Uppdateringsintervall (s)",
     "Restart": "Starta om",
     "Restart Needed": "Omstart behövs",
     "Restarting": "Startar om",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Visas istället för nod-ID. Skickas till andra noder som namn på denna nod.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Visas istället för nod-ID. Sätts till namnet på den andra noden vid första anslutning om det lämnas blankt.",
     "Shutdown": "Stäng av",
+    "Simple File Versioning": "Enkel versionshantering",
     "Source Code": "Källkod",
+    "Staggered File Versioning": "Versionshantering i intervall",
     "Start Browser": "Starta browser",
     "Stopped": "Stoppad",
     "Support / Forum": "Support / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Den krypterade användarstatistiken skickas dagligen. Den används för att spåra vanliga plattformar, lagringsstorlekar och versioner. Om datan som rapporteras ändras så kommer du att bli tillfrågad igen.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det inmatade nod-ID:t verkar inte korrekt. Det ska vara en 52 teckens sträng bestående av siffror och bokstäver, eventuellt med mellanrum och bindestreck.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det inmatade nod-ID:t verkar inte korrekt. Det ska vara en 52 eller 56 teckens sträng bestående av siffror och bokstäver, eventuellt med mellanrum och bindestreck.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "De följande intervallen används: varje 30 sekunder under den första timmen; varje timme under den första dagen; varje dag för de första 30 dagarna; varje vecka tills den maximala åldersgränsen uppnås.",
+    "The maximum age must be a number and cannot be blank.": "Åldersgränsen måste vara ett tal och kan inte lämnas blankt.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Den längsta tid att behålla en version (i dagar, sätt till 0 för att behålla versioner för evigt).",
     "The node ID cannot be blank.": "Nod-ID:t kan inte vara blankt.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Nod-ID:t som behövs här kan du hitta i \"Redigera > Visa ID\"-dialogen på den andra noden. Mellanrum och bindestreck är valfria (ignoreras).",
     "The number of old versions to keep, per file.": "Antalet gamla versioner som ska behållas, per fil.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Lagrings-ID måste vara en kort identifierar (64 tecken eller mindre), bestående av endast bokstäver, siffror, punkt (.), bindestreck (-) och understräck (_).",
     "The repository ID must be unique.": "Lagrings-ID måste vara unikt.",
     "The repository path cannot be blank.": "Lagrings-ID kan inte lämnas blankt.",
+    "The rescan interval must be at least 5 seconds.": "Uppdateringsintervallet måste vara minst 5 sekunder.",
     "Unknown": "Okänt",
     "Up to Date": "Helt uppdaterad",
     "Upgrade To {%version%}": "Uppgradera till {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Använd komprimering",
     "Use HTTPS for GUI": "Använd HTTPS för GUI",
     "Version": "Version",
+    "Versions Path": "Katalog för versioner",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versioner tas bort automatiskt när de är äldre än den maximala åldersgränsen eller överstiger frekvensen i sitt interval.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "När du lägger till en ny nod, kom ihåg att den här noden måste läggas till på den andra noden också.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "När du lägger till ny lagring, tänk på att lagrings-ID knyter ihop lagringen mellan olika noder. De måste vara exakt desamma mellan noder, och stora eller små bokstäver har betydelse.",
     "Yes": "Ja",

gui/lang-tr.json

@@ -38,6 +38,7 @@
     "Idle": "Boşta",
     "Ignore Permissions": "İzinleri yoksay",
     "Keep Versions": "Sürüm tut",
+    "Last seen": "Last seen",
     "Latest Release": "Son sürüm",
     "Local Discovery": "Yerel bulma",
     "Local Discovery Port": "Yerel bulma portları",
@@ -45,7 +46,10 @@
     "Master Repo": "Ana depo",
     "Max File Change Rate (KiB/s)": "Mak. Dosya değiştirme oranı (KB/sn)",
     "Max Outstanding Requests": "Maks Öncellikli İstekler",
+    "Maximum Age": "Maximum Age",
+    "Never": "Never",
     "No": "Hayır",
+    "No File Versioning": "No File Versioning",
     "Node ID": "Düğüm ID",
     "Node Identification": "Düğüm Kimliği",
     "Node Name": "Düğüm İsmi",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Yükleme hız sınırı (KB/sn)",
     "Override Changes": "Değişiklikleri Geçersiz kıl",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Yerel bilgisayardaki depoya ulaşım yolu. Dizin yoksa yaratılacak. (~) karakterinin kısayol olarak kullanılabileceği yol",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Lütfen Bekleyin",
     "Preview Usage Report": "Kullanım raporunu gözden geçir",
     "RAM Utilization": "RAM Kullanımı",
@@ -65,6 +70,7 @@
     "Repository Master": "Ana depo",
     "Repository Path": "Depo Yolu",
     "Rescan": "Tekrar Tara",
+    "Rescan Interval": "Rescan Interval",
     "Rescan Interval (s)": "Tekrar tarama süresi (sn)",
     "Restart": "Yeniden Başlat",
     "Restart Needed": "Yeniden başlatma gereklidir",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Küme durumunda Düğüm ID yerine bunu göster.  Varsayılan isim isteğe bağlı olarak diğer düğümlere ilan edilecektir.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Küme durumunda Düğüm ID yerine bunu göster.  Eğer düğüm ismi boş bırakılırsa düğüm ismi güncellenip ilan edilecektir.",
     "Shutdown": "Kapat",
+    "Simple File Versioning": "Simple File Versioning",
     "Source Code": "Kaynak Kodu",
+    "Staggered File Versioning": "Staggered File Versioning",
     "Start Browser": "Tarayıcıyı Başlat",
     "Stopped": "Durduruldu",
     "Support / Forum": "Destek / Forum",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Şifrelenmiş kullanım bilgisi günlük olarak gönderilir. Platform, depo büyüklüğü ve uygulama sürümü hakkında bilgi toplanır. Toplanan bilgi çeşidi değişecek olursa, sizden tekrar onay istenecek.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Girilen düğüm ID'si geçerli gibi gözükmüyor. 52 karakter uzunluğunda, harf ve rakamlardan oluşmalı. Boşlukların ve kısa çizgilerin olup olmaması önemli değildir.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Girilen düğüm ID'si geçerli gibi gözükmüyor. 52 ya da 56 karakter uzunluğunda, harf ve rakamlardan oluşmalı. Boşlukların ve kısa çizgilerin olup olmaması önemli değildir.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "Düğüm ID'si boş olamaz.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Buraya girilecek düğüm ID'si diğer düğümde \"Düzenle > ID Göster\" menüsünden bulunabilir. Boşluk ve kısa çizginin olup olmaması önemli değildir. (İhmal edilir)",
     "The number of old versions to keep, per file.": "Dosya başına saklanacak eski sürüm.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Depo ID uzun olmamalı (64 karakter ya da daha az). Sadece harf, rakam, nokta (.), kısa çizgi (-) ve alt çizgi (_) kullanabilirsiniz.",
     "The repository ID must be unique.": "Depo ID'si benzersiz olmalıdır.",
     "The repository path cannot be blank.": "Depo yolu boş bırakılamaz.",
+    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
     "Unknown": "Bilinmiyor",
     "Up to Date": "Güncel",
     "Upgrade To {%version%}": "{{version}} sürümüne yükselt",
@@ -115,6 +127,8 @@
     "Use Compression": "Sıkıştırma kullan",
     "Use HTTPS for GUI": "GUI için HTTPS kullan",
     "Version": "Sürüm",
+    "Versions Path": "Versions Path",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Yeni bir düğüm eklendiğinde unutmayın ki; bu düğüm diğer tarafa da eklenmelidir.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Unutmayın ki; Depo ID, depoları düğümler arasında bağlamak için kullanılıyor. Büyük - küçük harf duyarlı, ve bütün düğümlerde aynı olmalı.",
     "Yes": "Evet",

gui/lang-uk.json

@@ -38,6 +38,7 @@
     "Idle": "Очікування",
     "Ignore Permissions": "Ігнорувати права доступу до файлів",
     "Keep Versions": "Зберігати версії",
+    "Last seen": "Last seen",
     "Latest Release": "Останній реліз",
     "Local Discovery": "Локальне виявлення",
     "Local Discovery Port": "Локальний порт для виявлення",
@@ -45,7 +46,10 @@
     "Master Repo": "Центральний репозиторій",
     "Max File Change Rate (KiB/s)": "Максимальна швидкість змінення файлів (КіБ/с)",
     "Max Outstanding Requests": "Максимальна кількість вихідних запитів",
+    "Maximum Age": "Maximum Age",
+    "Never": "Never",
     "No": "Ні",
+    "No File Versioning": "No File Versioning",
     "Node ID": "ID вузла",
     "Node Identification": "Ідентифікатор вузла",
     "Node Name": "Назва вузла",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "Ліміт швидкості віддачі (КіБ/с)",
     "Override Changes": "Перезаписати зміни",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Шлях до репозиторія на локальному комп’ютері. Буде створений, якщо такий не існує. Символ тильди (~) може бути використаний як ярлик для",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
     "Please wait": "Будь ласка, зачекайте",
     "Preview Usage Report": "Попередній перегляд статистичного звіту",
     "RAM Utilization": "Використання RAM",
@@ -65,6 +70,7 @@
     "Repository Master": "Центральний репозиторій",
     "Repository Path": "Шлях до репозиторія",
     "Rescan": "Пересканувати",
+    "Rescan Interval": "Rescan Interval",
     "Rescan Interval (s)": "Інтервал для повторного сканування (с)",
     "Restart": "Перезапуск",
     "Restart Needed": "Необхідний перезапуск",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
     "Shutdown": "Вимкнути",
+    "Simple File Versioning": "Simple File Versioning",
     "Source Code": "Сирцевий код",
+    "Staggered File Versioning": "Staggered File Versioning",
     "Start Browser": "Запустити браузер",
     "Stopped": "Зупинено",
     "Support / Forum": "Підтримка / Форум",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Зашифрована статистика використання відсилається щоденно. Вона використовується для того, щоб розробники розуміли, на яких платформах працює програма, розміри репозиторіїв та версії програми. Якщо набір даних, що збирається зазнає змін, ви обов’язково будете повідомлені через це діалогове вікно.",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введений ID вузла невалідний. Ідентифікатор має вигляд строки довжиною 52 символи, що містить цифри та літери, із опціональними пробілами та тире.",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введений ID вузла невалідний. Ідентифікатор має вигляд строки довжиною 52 або 56 символів, що містить цифри та літери, із опціональними пробілами та тире.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
+    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
     "The node ID cannot be blank.": "ID вузла не може бути порожнім.",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "ID вузла, який необхідно додати. Може бути знайдений у вікні \"Редагувати > Показати ID\" на іншому вузлі. Пробіли та тире опціональні (вони ігноруються програмою).",
     "The number of old versions to keep, per file.": "Кількість старих версій, яку необхідно зберігати для кожного файлу.",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "ID репозиторія повинен бути коротким ідентифікатором (64 символи або менше), що містить лише цифри та літери, знак крапки (.), тире (-) та нижнього підкреслення (_).",
     "The repository ID must be unique.": "ID репозиторія повинен бути унікальним.",
     "The repository path cannot be blank.": "Шлях до репозиторія не може бути порожнім.",
+    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
     "Unknown": "Невідомо",
     "Up to Date": "Актуальа версія",
     "Upgrade To {%version%}": "Оновити до {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "Використовувати компресію",
     "Use HTTPS for GUI": "Використовувати HTTPS для доступу до панелі управління",
     "Version": "Версія",
+    "Versions Path": "Versions Path",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "Коли додаєте новий вузол, пам’ятайте, що цей вузол повинен бути доданий і на іншій стороні.",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Коли додаєте новий репозиторій, пам’ятайте, що ID репозиторія використовується для того, щоб зв’язувати репозиторії разом між вузлами. Назви є чутливими до регістра та повинні співпадати точно між усіма вузлами.",
     "Yes": "Так",

gui/lang-zh-CN.json

@@ -38,6 +38,7 @@
     "Idle": "空闲",
     "Ignore Permissions": "忽略文件权限",
     "Keep Versions": "保留历史版本数量",
+    "Last seen": "Last seen",
     "Latest Release": "最新版本",
     "Local Discovery": "在局域网上寻找节点",
     "Local Discovery Port": "局域网寻找监听端口",
@@ -45,7 +46,10 @@
     "Master Repo": "主仓库",
     "Max File Change Rate (KiB/s)": "最大文件变化速率(千字节/每秒)",
     "Max Outstanding Requests": "同时可响应的请求数上限",
+    "Maximum Age": "历史版本最长保留时间",
+    "Never": "Never",
     "No": "否",
+    "No File Versioning": "不启用版本控制",
     "Node ID": "节点ID",
     "Node Identification": "节点ID",
     "Node Name": "节点名",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "上传速度限制(千字节/秒)",
     "Override Changes": "撤销改变",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "该仓库的本地路径。如果该路径不存在，则会自动创建。波浪线字符(~)代表了以下文件夹：",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "历史版本保存路径（若留空，则会保存在默认的.stversions文件夹）",
     "Please wait": "请稍候",
     "Preview Usage Report": "预览使用报告",
     "RAM Utilization": "内存使用量",
@@ -65,6 +70,7 @@
     "Repository Master": "主仓库",
     "Repository Path": "仓库路径",
     "Rescan": "重新扫描",
+    "Rescan Interval": "扫描间隔",
     "Rescan Interval (s)": "扫描间隔(秒)",
     "Restart": "重启syncthing",
     "Restart Needed": "需要重启Syncthing",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "在节点群中，将会显示本名称，而不是节点ID。同时也会被做为默认名称，通告至其他节点。",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "在节点群中，将会显示本名称，而不是节点ID。如果设置为空，则会使用目标节点提供的默认名称。",
     "Shutdown": "关闭Syncthing",
+    "Simple File Versioning": "简易版本控制",
     "Source Code": "源代码",
+    "Staggered File Versioning": "阶段版本控制",
     "Start Browser": "启动浏览器",
     "Stopped": "已停止",
     "Support / Forum": "支持/论坛",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "经过加密的使用报告会每天发送。它用来跟踪统计使用本软件的平台，仓库大小，以及本软件的版本。如果报告的内容有任何变化，本对话框会再次弹出提示您。",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "输入的节点ID似乎无效。节点ID长度必须为52的字母和数字。空格和横线不算在内。",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "输入的节点ID似乎无效。节点ID长度必须为52或56的字母和数字。空格和横线不算在内。",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "保留的历史版本会满足以下条件：最近一小时内的历史版本，更新间隔小于30秒的仅保留一份。最近一天内的历史版本，更新间隔小于1小时的仅保留一份。最近一个月内的历史版本，更新间隔小于1天的仅保留一份。距离现在超过一个月且小于最长保留时间的，更新间隔小于1周的仅保留一份。",
+    "The maximum age must be a number and cannot be blank.": "最长保留时间必须为数字，且不能为空。",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "历史版本保留的最长天数，0为永久保存",
     "The node ID cannot be blank.": "节点ID不能为空",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "在这里需要输入的节点ID，可以在目标节点管理页面右上角的\"选项>显示节点ID\"获得。空格和横线会被自动忽略。",
     "The number of old versions to keep, per file.": "每个文件保留的版本数量上限。",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "仓库ID的长度,必须在64字节或更少，只能包含字母，数字，点(.),以及下划线(_)",
     "The repository ID must be unique.": "仓库ID必须唯一。",
     "The repository path cannot be blank.": "仓库路径不能为空。",
+    "The rescan interval must be at least 5 seconds.": "扫描间隔必须至少为5秒。",
     "Unknown": "未知",
     "Up to Date": "同步完成",
     "Upgrade To {%version%}": "升级至版本{{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "使用压缩",
     "Use HTTPS for GUI": "使用HTTPS连接web管理页面",
     "Version": "版本",
+    "Versions Path": "历史版本路径",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "超过最长保留时间，或者不满足下列条件的历史版本，将会被删除。",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "当您在本节点上添加新节点时，也必须在您所添加的节点上添加本节点。",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "添加新仓库时需要注意，仓库ID是用来在不同节点间绑定关联的仓库的。仓库ID是大小写敏感的，而且在所有的节点中必须完全相同，才能正确建立同步。",
     "Yes": "是",

gui/lang-zh-TW.json

@@ -38,6 +38,7 @@
     "Idle": "閒置",
     "Ignore Permissions": "忽略權限",
     "Keep Versions": "保留版本數",
+    "Last seen": "Last seen",
     "Latest Release": "最新發佈",
     "Local Discovery": "本地探索",
     "Local Discovery Port": "本地探索連接埠",
@@ -45,7 +46,10 @@
     "Master Repo": "主儲存庫",
     "Max File Change Rate (KiB/s)": "最大檔案改變速率 (KiB/s)",
     "Max Outstanding Requests": "最大未完成的請求",
+    "Maximum Age": "最長存留時間",
+    "Never": "Never",
     "No": "否",
+    "No File Versioning": "無檔案版本控制",
     "Node ID": "節點識別碼",
     "Node Identification": "節點識別",
     "Node Name": "節點名稱",
@@ -57,6 +61,7 @@
     "Outgoing Rate Limit (KiB/s)": "連出速率限制 (KiB/s)",
     "Override Changes": "覆蓋改變",
     "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "儲存庫在本地電腦的路徑。若資料夾不存在則會建立。波浪符號 (~) 可用作下列資料夾的捷徑：",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "儲存歷史版本的路徑 (若為空，則預設使用儲存庫中的 .stversions 資料夾)。",
     "Please wait": "請稍後",
     "Preview Usage Report": "預覽使用資訊報告",
     "RAM Utilization": "記憶體使用率",
@@ -65,6 +70,7 @@
     "Repository Master": "主儲存庫",
     "Repository Path": "儲存庫路徑",
     "Rescan": "重新掃描",
+    "Rescan Interval": "重新掃描間隔",
     "Rescan Interval (s)": "掃描間隔 (秒)",
     "Restart": "重新啟動",
     "Restart Needed": "需要重新啟動",
@@ -81,7 +87,9 @@
     "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "代替節點識別碼顯示在叢集狀態中。這段文字將會廣播到其他的節點作為一個可選的預設名稱。",
     "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "代替節點識別碼顯示在叢集狀態中。本欄若未填寫則將被更新為此節點所廣播的名稱。",
     "Shutdown": "關閉",
+    "Simple File Versioning": "簡單檔案版本控制",
     "Source Code": "原始碼",
+    "Staggered File Versioning": "交錯式檔案版本控制",
     "Start Browser": "啟動瀏覽器",
     "Stopped": "已停止",
     "Support / Forum": "支援 / 論壇",
@@ -98,6 +106,9 @@
     "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "經過加密的使用資訊報告會每天傳送。報告是用來追蹤常用的平台、儲存庫的大小以及應用程式的版本。若傳送的資料集有異動，您會再次看到這個對話框。",
     "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "輸入的節點識別碼似乎無效。它應該為一串包含半形英文字母及數字，並可能會含有空白或連接符號的字串，且長度為 52 個字元。",
     "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "輸入的節點識別碼似乎無效。它應該為一串包含半形英文字母及數字，並可能會含有空白或連接符號的字串，且長度為 52 或 56 個字元。",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "使用下列的間隔：在第一個小時內每 30 秒保留一個版本，在第一天內每小時保留一個版本，在第 30 天內每一天保留一個版本，在達到最長存留時間前每一星期保留一個版本。",
+    "The maximum age must be a number and cannot be blank.": "最長存留時間最大必須為一個數字且不得為空。",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "一個版本被保留的最長時間 (單位為天，若設定為 0 則表示永遠保留)。",
     "The node ID cannot be blank.": "節點識別碼不能為空白。",
     "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "要輸入在這裡的節點識別碼可以在其他節點的 \"編輯 > 顯示識別碼\" 對話框找到。空白以及連接符號可不輸入 (省略)。",
     "The number of old versions to keep, per file.": "每個檔案要保留的舊版本數量。",
@@ -106,6 +117,7 @@
     "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "儲存庫識別碼必須為一段只包含半形英文字母、數字、點 (.)、連接符號 (-) 以及底線 (_) 的簡短識別碼 (不多於 64 個字元)",
     "The repository ID must be unique.": "儲存庫識別碼必須為獨一無二的。",
     "The repository path cannot be blank.": "儲存庫路徑不能空白。",
+    "The rescan interval must be at least 5 seconds.": "重新掃描間隔至少必須為 5 秒。",
     "Unknown": "未知",
     "Up to Date": "最新",
     "Upgrade To {%version%}": "升級到 {{version}}",
@@ -115,6 +127,8 @@
     "Use Compression": "使用壓縮",
     "Use HTTPS for GUI": "為 GUI 使用 HTTPS",
     "Version": "版本",
+    "Versions Path": "歷史版本路徑",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "當檔案歷史版本的存留時間大於設定的最大值，或是其數量在一段時間內超出允許值時，則會被刪除。",
     "When adding a new node, keep in mind that this node must be added on the other side too.": "當新增一個節點時，請記住，這個節點也必須被添加至另一邊。",
     "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "當新增一個儲存庫時，請記住，儲存庫識別碼是用來將節點之間的儲存庫綁定在一起的。它們有區分大小寫，且必須在所有節點之間完全相同。",
     "Yes": "是",