Translation update

gui/lang/lang-bg.json

@@ -1,68 +1,65 @@
 {
     "API Key": "API Ключ",
     "About": "За Програмата",
-    "Add Node": "Добави Машина",
-    "Add Repository": "Добави Папка",
+    "Add Device": "Add Device",
+    "Add Folder": "Add Folder",
     "Address": "Адрес",
     "Addresses": "Адреси",
     "Allow Anonymous Usage Reporting?": "Разреши анонимен доклад за ползване на програмата?",
-    "Announce Server": "Announce Server",
     "Anonymous Usage Reporting": "Анонимен Доклад",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
     "Bugs": "Бъгове",
     "CPU Utilization": "Натоварване на Процесора",
     "Close": "Затвори",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Comment, when used at the start of a line": "Коментар, използван в началото на реда",
+    "Compression is recommended in most setups.": "Компресията е препоръчителна в повечето конфигурации.",
     "Connection Error": "Грешка при Свързването",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "Правата запазени © 2014 Jakob Borg и следните Сътрудници:",
     "Delete": "Изтрий",
+    "Device ID": "Device ID",
+    "Device Identification": "Device Identification",
+    "Device Name": "Device Name",
     "Disconnected": "Прекрати Връзката",
     "Documentation": "Документация",
     "Download Rate": "Скорост на Теглене",
     "Edit": "Промени",
-    "Edit Node": "Промени Машината",
-    "Edit Repository": "Промени Папката",
-    "Editing": "Editing",
+    "Edit Device": "Edit Device",
+    "Edit Folder": "Edit Folder",
+    "Editing": "Променяне",
     "Enable UPnP": "Включи UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведи \"ip:port\" адреси разделени със запетая или \"dynamic\", за да извършиш автоматична връзка на адреси.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
+    "Enter ignore patterns, one per line.": "Добави шаблони за игнориране, по един на ред.",
     "Error": "Грешка",
     "File Versioning": "Файлови Версии",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Битовете за права за достъп са игнорирани, когато се проверява за промени. Използвай с файлови системи тип FAT.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Когато syncthing замени или изтрие файл той се премества в  .stversions и преименува с дабавени дата и час.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Файловете са защитени от промени направени на други машини, но промени направени на тази машина ще бъдат синхронизирани до другите машини.",
-    "Folder": "Папка",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.",
+    "Folder ID": "Folder ID",
+    "Folder Master": "Folder Master",
+    "Folder Path": "Folder Path",
     "GUI Authentication Password": "Парола за Потребителския Интерфейс",
     "GUI Authentication User": "Потребител за Потребителския Интерфейс",
     "GUI Listen Addresses": "Адрес за Свързване с Потребителския Интерфейс",
     "Generate": "Генерирай",
     "Global Discovery": "Глобавно Откриване",
     "Global Discovery Server": "Сървър за Глобално Откриване",
-    "Global Repository": "Глобална Папка",
+    "Global State": "Global State",
     "Idle": "Без Работа",
-    "Ignore Patterns": "Ignore Patterns",
+    "Ignore Patterns": "Шаблони за Игнориране",
     "Ignore Permissions": "Игнорирай Права за Достъп",
     "Incoming Rate Limit (KiB/s)": "Входящ Лимит на Скороста(KiB/s)",
     "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
+    "Inversion of the given condition (i.e. do not exclude)": "Обратното на даденото условие (пр. не изключвай)",
     "Keep Versions": "Пази Версии",
     "Last seen": "Последно видян",
     "Latest Release": "Най-новата Версия",
     "Local Discovery": "Локално Откриване",
-    "Local Discovery Port": "Порт за Локално Откриване",
-    "Local Repository": "Локална Папка",
-    "Master Repo": "Главна Папка",
-    "Max File Change Rate (KiB/s)": "Макс. Скорост на Промяна (KiB/s)",
-    "Max Outstanding Requests": "Макс. Неизпълени Заявки",
+    "Local State": "Local State",
     "Maximum Age": "Максимална Възраст",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
+    "Multi level wildcard (matches multiple directory levels)": "Маска на много нива (покрива папки с много нива)",
     "Never": "Никога",
     "No": "Не",
     "No File Versioning": "Няма Файлови Версии",
-    "Node ID": "Код на Машината",
-    "Node Identification": "Идентификация на Машината",
-    "Node Name": "Име на Машината",
     "Notice": "Известие",
     "OK": "ОК",
     "Offline": "Не е на линия",
@@ -70,37 +67,31 @@
     "Out Of Sync": "Не Синхронизиран",
     "Outgoing Rate Limit (KiB/s)": "Лимит на Изходящата Скорост (KiB/s)",
     "Override Changes": "Замени Промените",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Пътят до папката на този компютър. Ще бъде създадена ако не съществува. Символът тилда (~) може да бъде използван като заместител на",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Пътят, където версиите да бъдат складирани(остави празно за папката .stversions).",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Path where versions should be stored (leave empty for the default .stversions folder in the folder).",
     "Please wait": "Моля изчакай",
-    "Preview": "Preview",
+    "Preview": "Преглед",
     "Preview Usage Report": "Разгледай Доклада за Използване",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
+    "Quick guide to supported patterns": "Бърз наръчник към поддържаните шаблони",
     "RAM Utilization": "RAM Натоварване",
-    "Reconnect Interval (s)": "Интервал(и) на Свързване",
-    "Repository ID": "Идентификатор на Папката",
-    "Repository Master": "Главна Папка",
-    "Repository Path": "Път до Папката",
     "Rescan": "Повторно Сканиране",
     "Rescan Interval": "Интервал за Повторно Сканиране",
-    "Rescan Interval (s)": "Интеравал(и) на Сканиране",
     "Restart": "Рестартирай",
     "Restart Needed": "Изискава се Рестартиране",
     "Restarting": "Рестартиране",
     "Save": "Запази",
     "Scanning": "Сканиране",
-    "Select the nodes to share this repository with.": "Избери компютрите, с които да споделиш тази папка.",
+    "Select the devices to share this folder with.": "Select the devices to share this folder with.",
     "Settings": "Настройки",
-    "Share With Nodes": "Сподели с Компютри",
+    "Share With Devices": "Share With Devices",
     "Shared With": "Сподел С",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Кратък идентификатор на папката. Трябва да бъде същият на всички компютри.",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Short identifier for the folder. Must be the same on all cluster devices.",
     "Show ID": "Покажи Идентификатора",
-    "Shown instead of Node ID in the cluster status.": "Покажи вмест ID-то на Компютъра в статус на клъстъра.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Покажи вмест ID-то на Компютъра в статус на клъстъра. Ще бъде предлагано на други комютри като име по подразбиране.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Покажи вмест ID-то на Компютъра в статус на клъстъра. Ще бъде обновено с името по подразбиране изпратено от другия компютър.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
     "Shutdown": "Спри Програмата",
     "Simple File Versioning": "Просто Файлови Версии",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
+    "Single level wildcard (matches within a directory only)": "Маска на едно ниво (покрива само в папка)",
     "Source Code": "Сорс Код",
     "Staggered File Versioning": "Наслагващи се Файлови Версии",
     "Start Browser": "Стартирай Браузъра",
@@ -116,37 +107,34 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing изглежда не е включен, или има проблем с интерент връзката. Повторен опит...",
     "The aggregated statistics are publicly available at {%url%}.": "Сумарната статистика е публично достъпна на {{url}}.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Конфигурацията е запазена, но не е активирана. Syncthing трябва да рестартира, за да се активира новата конфигурация.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Криптираният доклад се изпраща дневно. Използва се, за да следи общи платформи, размери на папки и версии на приложението. Ако събираните данни се променят, ще бъдете информиран с подобен на този диалог.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Въведни код на машината не е валиден. Трябва да бъде 52 символа и да се състои от букви, цифри като интервалите и тиретата са пожелание.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Въведни код на машината не е валиден. Трябва да бъде 52 или 56 символа и да се състои от букви, цифри като интервалите и тиретата са пожелание.",
+    "The device ID cannot be blank.": "The device ID cannot be blank.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.",
+    "The folder ID cannot be blank.": "The folder ID cannot be blank.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
+    "The folder ID must be unique.": "The folder ID must be unique.",
+    "The folder path cannot be blank.": "The folder path cannot be blank.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Използва се следния интервал: за първия час се пази версия всеки 30 секунди, за първия ден се пази версия всеки час, за първите 30 дена се пази версия всеки ден, до максимума се пази една версия всяка седмица.",
     "The maximum age must be a number and cannot be blank.": "Максималната възраст трябва да е число и не може д ае празна.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Максималното време да се пазят весрсии (в дни, сложи 0, за да пазиш версии завинаги).",
-    "The node ID cannot be blank.": "Кодът на машината не може да бъде празен.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Кодът на машината, който си въвел може да бъде намерен в \"Промени > Покажи Идентификатора\". Интервалите и тиретата са пожелание(биват прескачани).",
     "The number of old versions to keep, per file.": "Броят стари версии, които да бъдат пазени за всеки файл.",
     "The number of versions must be a number and cannot be blank.": "Броят версии трябва да бъде число и не може да бъде празно.",
-    "The repository ID cannot be blank.": "Полето идентификатор на папка не може д абъде празно.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Идентификаторът на папка трябва да бъде къс(64 символа или по-малко) състоящ се само от букви, цифри, точка(.), тире(-) и подчерта (_).",
-    "The repository ID must be unique.": "Идентификаторът на папката тряба да бъде уникален.",
-    "The repository path cannot be blank.": "Пътят до папката не може да бъде празен.",
     "The rescan interval must be at least 5 seconds.": "Интервала за повторно сканиране трябва да бъде поне 5 секунди.",
     "Unknown": "Неясен",
     "Up to Date": "Актуален",
     "Upgrade To {%version%}": "Обновен До {{version}}",
     "Upgrading": "Обновяване",
     "Upload Rate": "Скорост на Качване",
-    "Usage": "Употреба",
     "Use Compression": "Използвай Компресиране",
     "Use HTTPS for GUI": "Използвай HTTPS за Потребителския Интерфейс",
     "Version": "Версия",
     "Versions Path": "Път до Версиите",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версиите биват изтривани автоматично, когато са по-стари от максималната възраст или надминават броя файлове разрешени в даден интервал.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Когато добавяш нова машина помни, че твоята машина също трябва да бъде добавена от другата страна.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Когато добавяш нов идентификатор на папка помни, че той се използва за свързване на папките на различни машини. Главни/малки букви са от значение и трябва да са еднакви на всички машини.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
     "Yes": "Да",
     "You must keep at least one version.": "Трябва да пазиш поне една версия.",
-    "full documentation": "full documentation",
+    "full documentation": "пълна документация",
     "items": "артикула"
 }

gui/lang/lang-ca.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "Clau API",
-    "About": "Sobre",
-    "Add Node": "Afegir Node",
-    "Add Repository": "Afegir Repositori",
-    "Address": "Adreça",
-    "Addresses": "Adreces",
-    "Allow Anonymous Usage Reporting?": "Permetre l'enviament anònim d'informes d'ús?",
-    "Announce Server": "Servidor d'anunciament",
-    "Anonymous Usage Reporting": "Informe anònim d'ús",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Bugs",
-    "CPU Utilization": "Utilització del CPU",
-    "Close": "Tancar",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Error de connexió",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg i els següents contribuïdors",
-    "Delete": "Esborrar",
-    "Disconnected": "Desconnectat",
-    "Documentation": "Documentació",
-    "Download Rate": "Tasa de descarrega",
-    "Edit": "Editar",
-    "Edit Node": "Editar Node",
-    "Edit Repository": "Editar Repositori",
-    "Editing": "Editing",
-    "Enable UPnP": "Habilitat UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduir, separat per comes, adreces \"ip:port\" o \"dynamic\" per descobrir automàticament les adreces.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Error",
-    "File Versioning": "Versionat de Fitxers",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Els bits de permisos dels fitxers son ignorats quan es cerquen canvis. Utilitzar en sistemes de fitxers FAT.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Els fitxers es mouen amb l'estampat de la data a la carpeta .stversions quan son substituïts o esborrats per syncthing.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Els fitxers estan protegits de canvis fets per altres nodes, però els canvis fets en aquest node seran enviats a la resta del cluster.",
-    "Folder": "Carpeta",
-    "GUI Authentication Password": "Contrasenya d'autenticació GUI",
-    "GUI Authentication User": "Usuari d'autenticació GUI",
-    "GUI Listen Addresses": "Adreça d'escolta del GUI",
-    "Generate": "Generar",
-    "Global Discovery": "Descobriment Global",
-    "Global Discovery Server": "Servidor de Descobriment Global",
-    "Global Repository": "Repositori Global",
-    "Idle": "Inactiu",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Ignora Permisos",
-    "Incoming Rate Limit (KiB/s)": "Incoming Rate Limit (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Mantenir Versions",
-    "Last seen": "Vist per última vegada",
-    "Latest Release": "Última publicació",
-    "Local Discovery": "Descobriment Local",
-    "Local Discovery Port": "Port de Descobriment Local",
-    "Local Repository": "Repositori Local",
-    "Master Repo": "Rep Master",
-    "Max File Change Rate (KiB/s)": "Tasa Màxima d'intercanvi de fitxer (KiB/s)",
-    "Max Outstanding Requests": "Màxim de Peticions Pendents",
-    "Maximum Age": "Antiguitat Màxima",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Mai",
-    "No": "No",
-    "No File Versioning": "Sense Versionat de Fitxer",
-    "Node ID": "ID del Node",
-    "Node Identification": "Identificació del Node",
-    "Node Name": "Nom Del Node",
-    "Notice": "Avís",
-    "OK": "OK",
-    "Offline": "Desconnectat",
-    "Online": "Connectat",
-    "Out Of Sync": "Fora de la Sincronització",
-    "Outgoing Rate Limit (KiB/s)": "Tasa Límit de Sortida (KiB/s)",
-    "Override Changes": "Sobreescriure Canvis",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta del repositori a l'equip local. Si no existeix serà creada. El caràcter (~) es pot fer servir com a drecera de",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Ruta on les versions s'haurien de guardar (deixa-ho buit per fer servir el directori .stversions per defecte al repositori)",
-    "Please wait": "Si-us-plau espera",
-    "Preview": "Preview",
-    "Preview Usage Report": "Vista Prèvia de l'Informe d'Ús",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "Utilització de la RAM",
-    "Reconnect Interval (s)": "Interval de Reconnexió (s)",
-    "Repository ID": "ID del Repositori",
-    "Repository Master": "Repositori Mestre",
-    "Repository Path": "Ruta del Repositori",
-    "Rescan": "Re-escanejar",
-    "Rescan Interval": "Interval de re-escaneig",
-    "Rescan Interval (s)": "Interval de re-escaneig (s)",
-    "Restart": "Reiniciar",
-    "Restart Needed": "És Necessari Reiniciar",
-    "Restarting": "Reiniciant",
-    "Save": "Guardar",
-    "Scanning": "Escanejant",
-    "Select the nodes to share this repository with.": "Seleccionar els nodes amb els que es comparteix el repositori.",
-    "Settings": "Preferències",
-    "Share With Nodes": "Compartir Amb Els Nodes",
-    "Shared With": "Compartir Amb",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Identificador curt pel repositori. Ha de ser el mateix per tots els nodes del cluster.",
-    "Show ID": "Mostrar ID",
-    "Shown instead of Node ID in the cluster status.": "Mostrat en comptes del ID del Node en l'estat del cluster.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Mostrat en comptes del ID del Node en l'estat del cluster. Serà advertit als altres nodes com un nom opcional per defecte.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Mostrat en comptes del ID del Node en l'estat del cluster. S'actualitzara al nom del node si es deixa buit.",
-    "Shutdown": "Apagar",
-    "Simple File Versioning": "Versionat de Fitxers Senzill",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Codi Font",
-    "Staggered File Versioning": "Versionat de Fitxers Esglaonat",
-    "Start Browser": "Arrancar Navegador",
-    "Stopped": "Aturat",
-    "Support / Forum": "Suport / Fòrum",
-    "Sync Protocol Listen Addresses": "Adreça d'escolta del Protocol Sync",
-    "Synchronization": "Sincronització",
-    "Syncing": "Synthing",
-    "Syncthing has been shut down.": "S'ha aturat el synthing.",
-    "Syncthing includes the following software or portions thereof:": "Syncthing inclou el següent programari o parts dels mateixos:",
-    "Syncthing is restarting.": "Reiniciant syncthing.",
-    "Syncthing is upgrading.": "Actualitzant syncthing.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Synthing sembla parat, o hi ha algun problema amb la connexió a Internet. Reintentant...",
-    "The aggregated statistics are publicly available at {%url%}.": "Les estadístiques agregades estan públicament disponibles a {{url}}.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuració s'ha guardar però no s'ha activat. S'ha de reiniciar el synthing per activar la nova configuració.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "L'informe d'ús encriptat s'envia diàriament. Es fa servir per rastrejar plataformes habituals, mides de repositoris i versions de l'aplicació. Si es canvia el conjunt de dades reportades es demanarà amb aquest diàleg de nou.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "El ID del Node introduït no sembla vàlid. Hauria de tenir 52 caràcters amb lletres i números, els espais i les barres son opcionals.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "El ID del Node introduït no sembla vàlid. Hauria de tenir 52 o 56 caràcters amb lletres i números, els espais i les barres son opcionals.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Es fan servir els següents intervals: per la primera hora es manté una versió cada 30 segons, pel primer dia es manté una versió cada hora, pel primer cada 30 dies es manté una versió cada dia, fins el màxim d'antiguitat es manté una versió cada setmana.",
-    "The maximum age must be a number and cannot be blank.": "La màxima antiguitat ha de ser un número i no pot estar en blanc.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Temps màxim en mantenir una versió (en dies, si es deixa en 0 es mantenen les versions per sempre).",
-    "The node ID cannot be blank.": "El ID del node no pot estar en blanc.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "El ID del node per introduir aquí es pot trobar al diàleg \"Editar > Mostrar ID\" en l'altre node. Els espais i les barres son opcionals (s'ignoren).",
-    "The number of old versions to keep, per file.": "El nombre de versions antigues que es mantenen per fitxer.",
-    "The number of versions must be a number and cannot be blank.": "El nombre de versions ha de ser un número i no es pot deixar en blanc.",
-    "The repository ID cannot be blank.": "El ID del repositori no pot estar en blanc.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "El ID del repositori ha de ser un identificador curt (64 caràcters o menys) format només per lletres, nombres i el punt (.), barra (-) i barra baixa (_).",
-    "The repository ID must be unique.": "El ID del repositori ha de ser únic",
-    "The repository path cannot be blank.": "La carpeta del repositori no pot estar en blanc.",
-    "The rescan interval must be at least 5 seconds.": "El interval de re-escaneig ha de ser com a mínim de 5 segons.",
-    "Unknown": "Desconegut",
-    "Up to Date": "Actualitzat",
-    "Upgrade To {%version%}": "Actualitzar a {{version}}",
-    "Upgrading": "Actualitzant",
-    "Upload Rate": "Tasa de Pujada",
-    "Usage": "Ús",
-    "Use Compression": "Utilitza compressió",
-    "Use HTTPS for GUI": "Utilitzar HTTPS pel GUI",
-    "Version": "Versió",
-    "Versions Path": "Carpeta de les Versions",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les versions son automàticament eliminades si son més antigues que el màxim d'antiguitat o si excedeixen del nombre de fitxers permesos en un interval.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Quan s'afegeix un nou node recorda que aquest node s'ha d'afegir tambe a l'altre banda.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Quan s'afegeix un nou repositori recorda que el ID del repositori s'utilitza per lligar repositoris entre nodes. Es distingeix entre majúscules i minúscules i ha de ser exactament iguals entre tots els nodes.",
-    "Yes": "Si",
-    "You must keep at least one version.": "Has de mantenir com a mínim una versió.",
-    "full documentation": "full documentation",
-    "items": "Elements"
-}

gui/lang/lang-da.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "API-nøgle",
-    "About": "Om",
-    "Add Node": "Tilføj node",
-    "Add Repository": "Tilføj lager",
-    "Address": "Adresse",
-    "Addresses": "Adresser",
-    "Allow Anonymous Usage Reporting?": "Tillad anonym brugerstatistik?",
-    "Announce Server": "Opslagsserver",
-    "Anonymous Usage Reporting": "Anonym brugerstatistik",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Fejl",
-    "CPU Utilization": "CPU-forbrug",
-    "Close": "Luk",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Tilslutnings fejl",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg og følgende bidragsydere:",
-    "Delete": "Slet",
-    "Disconnected": "Ikke tilsluttet",
-    "Documentation": "Dokumentation",
-    "Download Rate": "Downloadhastighed",
-    "Edit": "Rediger",
-    "Edit Node": "Rediger node",
-    "Edit Repository": "Rediger lager",
-    "Editing": "Editing",
-    "Enable UPnP": "Anvend UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Angiv kommaseparerat \"ip:port\"-adresser eller ordet \"dynamic\" for at benytte automatisk opslag.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Fejl",
-    "File Versioning": "Filversionering",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Filrettigheder tages der ikke hensyn til ved synkronisering. Anvend på FAT-filsystemer.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Filer flyttes til et datostemplet versionsnavn i et .stversions-bibliotek, når de bliver opdateret eller slettet af syncthing.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Filer beskyttes mod ændringer fra andre noder, men ændringer på denne node bliver sendt til hele clusteret.",
-    "Folder": "Bibliotek",
-    "GUI Authentication Password": "GUI-kodeord",
-    "GUI Authentication User": "GUI-brugernavn",
-    "GUI Listen Addresses": "GUI-lytteadresse",
-    "Generate": "Opret",
-    "Global Discovery": "Globalt opslag",
-    "Global Discovery Server": "Global opslagsserver",
-    "Global Repository": "Global lagring",
-    "Idle": "Inaktiv",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Ignorér filrettigheder",
-    "Incoming Rate Limit (KiB/s)": "Incoming Rate Limit (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Behold versioner",
-    "Last seen": "Last seen",
-    "Latest Release": "Seneste udgivelse",
-    "Local Discovery": "Lokal opslag",
-    "Local Discovery Port": "Lokal opslagsport",
-    "Local Repository": "Lokal lagring",
-    "Master Repo": "Hovedlagring",
-    "Max File Change Rate (KiB/s)": "Højeste filændringshastighed (KiB/s)",
-    "Max Outstanding Requests": "Parallelitet",
-    "Maximum Age": "Maximum Age",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Never",
-    "No": "Nej",
-    "No File Versioning": "No File Versioning",
-    "Node ID": "Node ID",
-    "Node Identification": "Node identifikation",
-    "Node Name": "Nodenavn",
-    "Notice": "OBS",
-    "OK": "OK",
-    "Offline": "Offline",
-    "Online": "Online",
-    "Out Of Sync": "Ude af sync",
-    "Outgoing Rate Limit (KiB/s)": "Udgående hastighedsbegrænsning (KiB/s)",
-    "Override Changes": "Overskriv ændringer",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sti til lagring på din lokale computer. Hvis biblioteket ikke findes vil det blive oprettet. Tegnet tilde (~) kan bruges som genvej til",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
-    "Please wait": "Vent venligst",
-    "Preview": "Preview",
-    "Preview Usage Report": "Forhåndsvisning af forbrugsrapport",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "RAM-forbrug",
-    "Reconnect Interval (s)": "Gentilslutningsinterval (s)",
-    "Repository ID": "Lagrings-ID",
-    "Repository Master": "Hovedlagring",
-    "Repository Path": "Sti til lagring",
-    "Rescan": "Rescan",
-    "Rescan Interval": "Rescan Interval",
-    "Rescan Interval (s)": "Genscanningsinterval (s)",
-    "Restart": "Genstart",
-    "Restart Needed": "Programmet kræver genstart",
-    "Restarting": "Genstarter",
-    "Save": "Gem",
-    "Scanning": "Opdaterer",
-    "Select the nodes to share this repository with.": "Vælg hvilke noder denne lagring skal deles med.",
-    "Settings": "Indstillinger",
-    "Share With Nodes": "Del med noderne",
-    "Shared With": "Delt med",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Kort identifikation for denne lagring. Skal være ens på alle noder i clusteret.",
-    "Show ID": "Vis ID",
-    "Shown instead of Node ID in the cluster status.": "Vises i stedet for node-ID under clusterstatus.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
-    "Shutdown": "Luk ned",
-    "Simple File Versioning": "Simple File Versioning",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Kildekode",
-    "Staggered File Versioning": "Staggered File Versioning",
-    "Start Browser": "Start browser",
-    "Stopped": "Stoppet",
-    "Support / Forum": "Support / Forum",
-    "Sync Protocol Listen Addresses": "Lytteadresser for indgående forbindelser",
-    "Synchronization": "Synkronisering",
-    "Syncing": "Synkroniserer",
-    "Syncthing has been shut down.": "Syncthing er blevet lukket ned.",
-    "Syncthing includes the following software or portions thereof:": "Syncthing indeholder følgende software eller dele heraf:",
-    "Syncthing is restarting.": "Syncthing genstarter",
-    "Syncthing is upgrading.": "Syncthing opgradere",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing ser ud til at være stoppet eller oplever problemer med din internetforbindels. Prøver igen...",
-    "The aggregated statistics are publicly available at {%url%}.": "Samlet statistik er offentligt tilgængelig på {{url}}.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Konfigurationen er gemt, men ikke aktiveret. Syncthing skal genstarte for at aktivere den nye konfiguration.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Den krypterede forbrugsrapport sendes dagligt. Den benyttes til at spore anvendte platforme, lagringsstørrelser og versioner.  Hvis det typen af opsamlet data ændres på et senere tidspunkt, vil du blive spurgt om tilladelse igen.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det indtastede node ID ser ikke gyldigt ud. Det skal være en 52 tegn streng, bestående af tal og bogstaver, eventuelt med mellemrum og bindestreger.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det indtastede node ID ser ikke gyldigt ud. Det skal være en 52 eller 56 tegn streng, bestående af tal og bogstaver, eventuelt med mellemrum og bindestreger.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
-    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
-    "The node ID cannot be blank.": "Node-ID'et kan ikke være blankt.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Node-ID'et som skal bruges her, kan du finde i \"Rediger > Vis ID\"-dialogen på den anden node. Mellemrum og bindestreg er valgfri (ignoreres).",
-    "The number of old versions to keep, per file.": "Antallet af gamle versioner som gemmes, per fil.",
-    "The number of versions must be a number and cannot be blank.": "Antallet af versioner skal være et tal, og kan ikke være blankt.",
-    "The repository ID cannot be blank.": "Lagrings-ID kan ikke være blankt.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Lagrings-ID'et skal være en kort identificierende streng (64 karaktere eller mindre) bestående af bogstav-, tal-, punktum- (.), bindestreg- (-) og understregskaraktere (_).",
-    "The repository ID must be unique.": "Lagrings-ID'et skal være unikt.",
-    "The repository path cannot be blank.": "Lagringsstien kan ikke være blank.",
-    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
-    "Unknown": "Ukendt",
-    "Up to Date": "Fuldt opdateret",
-    "Upgrade To {%version%}": "Opgradér til {{version}}",
-    "Upgrading": "Opgradere",
-    "Upload Rate": "Uploadhastighed",
-    "Usage": "Forbrug",
-    "Use Compression": "Anvend komprimering",
-    "Use HTTPS for GUI": "Anvend HTTPS til GUI adgang",
-    "Version": "Version",
-    "Versions Path": "Versions Path",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Når du tilføjer en ny node skal du huske, at den også skal tilføjes på den anden side.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Når du tilføjer en ny node skal du huske, at lagrings-ID'et bliver brugt til at knytte noder sammen. De er følsomme for store og små bogstaver og skal matche på alle noder.",
-    "Yes": "Ja",
-    "You must keep at least one version.": "Du skal beholde mindst én version.",
-    "full documentation": "full documentation",
-    "items": "poster"
-}

gui/lang/lang-de.json

@@ -1,28 +1,30 @@
 {
     "API Key": "API-Key",
     "About": "Über Syncthing",
-    "Add Node": "Knoten hinzufügen",
-    "Add Repository": "Verzeichnis hinzufügen",
+    "Add Device": "Gerät hinzufügen",
+    "Add Folder": "Verzeichnis hinzufügen",
     "Address": "Adresse",
     "Addresses": "Adressen",
     "Allow Anonymous Usage Reporting?": "Übertragung von anonymen Nutzungsstatistiken erlauben?",
-    "Announce Server": "Ankündigungs-Server",
     "Anonymous Usage Reporting": "Anonymer Nutzungsbericht",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Alle Geräte, die beim Verteiler eingetragen sind, werden auch bei diesem Gerät eingetragen",
     "Bugs": "Fehler",
     "CPU Utilization": "Prozessorauslastung",
     "Close": "Schließen",
     "Comment, when used at the start of a line": "Kommentar, wenn am Anfang der Zeile benutzt.",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Compression is recommended in most setups.": "Datenkomprimierung ist für die meisten Anwendungen empfohlen",
     "Connection Error": "Verbindungsfehler",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg und folgende Unterstützer:",
     "Delete": "Löschen",
+    "Device ID": "Geräte ID",
+    "Device Identification": "Gerät Identifikation",
+    "Device Name": "Geräte-Name",
     "Disconnected": "Verbindung getrennt",
     "Documentation": "Dokumentation",
     "Download Rate": "Downloadgeschwindigkeit",
     "Edit": "Einstellungen bearbeiten",
-    "Edit Node": "Knoten bearbeiten",
-    "Edit Repository": "Verzeichnis ändern",
+    "Edit Device": "Gerät bearbeiten",
+    "Edit Folder": "Verzeichnis Bearbeiten",
     "Editing": "Bearbeitung",
     "Enable UPnP": "UPnP aktivieren",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Trage durch ein Komma getrennte \"IP:Port\" Adressen oder \"dynamic\" ein um automatische Adresserkennung durchzuführen.",
@@ -31,38 +33,33 @@
     "File Versioning": "Dateiversionierung",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Dateizugriffsrechte beim Suchen nach Veränderungen ignorieren. Bei FAT-Dateisystemen verwenden.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Dateien werden, bevor syncthing sie löscht oder ersetzt, als datierte Versionen in einen Ordner names .stversions verschoben.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Dateien sind vor Veränderung durch andere Knoten geschützt, auf diesem Knoten durchgeführte Veränderungen werden aber auf den Rest des Netzwerks übertragen.",
-    "Folder": "Ordner",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Dateien sind vor Veränderung durch andere Geräte geschützt, auf diesem Gerät durchgeführte Veränderungen werden aber auf den Rest des Verbunds übertragen.",
+    "Folder ID": "Verzeichnis ID",
+    "Folder Master": "Keine Veränderungen zulassen",
+    "Folder Path": "Verzeichnis Pfad",
     "GUI Authentication Password": "Passwort für Zugang zur Benutzeroberfläche",
     "GUI Authentication User": "Nutzername für Zugang zur Benutzeroberfläche.",
     "GUI Listen Addresses": "Adresse(n) für die Benutzeroberfläche",
     "Generate": "Generieren",
     "Global Discovery": "Globale Auffindung",
     "Global Discovery Server": "Globaler Auffindungsserver",
-    "Global Repository": "Globales Verzeichnis",
+    "Global State": "Globaler Status",
     "Idle": "Untätig",
     "Ignore Patterns": "Ignoriermuster",
     "Ignore Permissions": "Berechtigungen ignorieren",
     "Incoming Rate Limit (KiB/s)": "Eingehendes Datenratelimit (KiB/s)",
-    "Introducer": "Introducer",
+    "Introducer": "Verteilergerät",
     "Inversion of the given condition (i.e. do not exclude)": "Umkehrung der angegebenen Bedingung (z.B. schließe nicht aus)",
     "Keep Versions": "Versionen erhalten",
     "Last seen": "Zuletzt online",
     "Latest Release": "Letzte Veröffentlichung",
     "Local Discovery": "Lokale Auffindung",
-    "Local Discovery Port": "Lokaler Aufindungsport",
-    "Local Repository": "Lokales Verzeichnis",
-    "Master Repo": "Originalverzeichnis",
-    "Max File Change Rate (KiB/s)": "Maximale Datenänderungsrate (KiB/s)",
-    "Max Outstanding Requests": "Max. ausstehende Anfragen",
+    "Local State": "Lokaler Status",
     "Maximum Age": "Höchstalter",
     "Multi level wildcard (matches multiple directory levels)": "Verschachteltes Maskenzeichen (wird für verschachtelte Verzeichnisse verwendet)",
     "Never": "Nie",
     "No": "Nein",
     "No File Versioning": "Keine Dateiversionierung",
-    "Node ID": "Knoten-ID",
-    "Node Identification": "Knoten Identifikation",
-    "Node Name": "Knoten-Name",
     "Notice": "Benachrichtigung",
     "OK": "Ok",
     "Offline": "Offline",
@@ -70,34 +67,28 @@
     "Out Of Sync": "Nicht synchronisiert",
     "Outgoing Rate Limit (KiB/s)": "Ausgehendes Datenratelimit (KiB/s)",
     "Override Changes": "Änderungen überschreiben",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pfad zum Verzeichnis auf dem lokalen Rechner. Wird erzeugt, wenn es nicht existiert. Das Tilden-Zeichen (~)  kann als Abkürzung benutzt werden für",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Pfad in dem die Versionen gespeichert werden sollen (ohne Angabe wird der Ordner .stversions im Verzeichnis verwendet).",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pfad zum Verzeichnis auf dem lokalen Rechner. Wird erzeugt, wenn es nicht existiert. Das Tilden-Zeichen (~) kann als Abkürzung benutzt werden für",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Pfad in dem die Versionen gespeichert werden sollen (ohne Angabe wird der Ordner .stversions im Verzeichnis verwendet).",
     "Please wait": "Bitte warten",
     "Preview": "Vorschau",
     "Preview Usage Report": "Vorschau des Nutzungsberichts",
     "Quick guide to supported patterns": "Schnellanleitung zu den unterstützten Suchstrukturen",
     "RAM Utilization": "Verwendeter Arbeitsspeicher",
-    "Reconnect Interval (s)": "Wiederverbindungsintervall (s)",
-    "Repository ID": "Verzeichnis-ID",
-    "Repository Master": "Originalverzeichnis",
-    "Repository Path": "Pfad zum Verzeichnis",
     "Rescan": "Überprüfen",
     "Rescan Interval": "Suchintervall",
-    "Rescan Interval (s)": "Suchintervall (s)",
     "Restart": "Neustart",
     "Restart Needed": "Neustart notwendig",
     "Restarting": "Wird neu gestartet",
     "Save": "Speichern",
     "Scanning": "Sucht",
-    "Select the nodes to share this repository with.": "Wähle die Knoten aus, mit denen du dieses Verzeichnis teilen willst.",
+    "Select the devices to share this folder with.": "Wähle die Geträte aus, mit denen du dieses Verzeichnis teilen willst.",
     "Settings": "Einstellungen",
-    "Share With Nodes": "Teile mit diesen Knoten",
+    "Share With Devices": "Teile mit diesen Geräten",
     "Shared With": "Geteilt mit",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Kurze ID für das Verzeichnis. Muss auf allen Verbunds-Knoten gleich sein.",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Kurze ID für das Verzeichnis. Muss auf allen Verbunds-Geräten gleich sein.",
     "Show ID": "ID anzeigen",
-    "Shown instead of Node ID in the cluster status.": "Wird anstatt der Knoten-ID im Verbunds-Status angezeigt.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Wird anstatt der Knoten-ID im Verbunds-Status angezeigt. Wird als optionaler Standardname an andere Knoten bekannt gegeben.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Wird anstatt der Knoten-ID im Verbunds-Status angezeigt. Wird auf den Namen aktualisiert, den der Knoten angibt.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Wird anstatt der Geräte-ID im Verbunds-Status angezeigt. Wird als optionaler Standardname an andere Geräte bekannt gegeben.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Wird anstatt der Geräte-ID im Verbunds-Status angezeigt. Wird auf den Namen aktualisiert, den das Gerät angibt.",
     "Shutdown": "Herunterfahren",
     "Simple File Versioning": "Einfache Dateiversionierung",
     "Single level wildcard (matches within a directory only)": "Einzelnes Maskenzeichen (wird für ein einzelnes Verzeichnis verwendet)",
@@ -116,35 +107,32 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing scheint nicht erreichbar zu sein oder es gibt ein Problem mit Ihrer Internetverbindung. Versuche erneut...",
     "The aggregated statistics are publicly available at {%url%}.": "Die gesammelten Statistiken sind öffentlich verfügbar unter {{url}}.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Die Konfiguration wurde gespeichert, aber nicht aktiviert. Syncthing muss neugestartet werden um die neue Konfiguration zu aktivieren.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Der verschlüsselte Benutzungsbericht wird täglich gesendet. Er wird benutzt um Statistiken über verwendete Betriebssysteme, Verzeichnis-Größen und Programm-Versionen zu erstellen. Sobald der Bericht in Zukunft weitere Daten erfasst, wird dir dieses Fenster erneut angezeigt.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Die eingegebene Knoten-ID scheint nicht gültig zu sein. Sie sollte eine 52 Stellen lange Zeichenkette aus Buchstaben und Zahlen sein. Leerzeichen und Striche sind optional (werden ignoriert).",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Die eingegebene Knoten-ID scheint nicht gültig zu sein. Es sollte eine 52 oder 56 stellige Zeichenkette aus Buchstaben und Nummern sein. Leerzeichen und Bindestriche sind optional.",
+    "The device ID cannot be blank.": "Die Geräte-ID darf nicht leer sein.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "Die hier einzutragende Geräte-ID kann im \"Bearbeiten > Zeige ID\"-Dialog auf dem anderen Gerät gefunden werden. Leerzeichen und Striche sind optional (werden ignoriert).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Der verschlüsselte Benutzungsbericht wird täglich gesendet. Er wird benutzt um Statistiken über verwendete Betriebssysteme, Verzeichnis-Größen und Programm-Versionen zu erstellen. Sollte der Bericht in Zukunft weitere Daten erfassen, wird dieses Fenster erneut angezeigt.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Die eingegebene Geräte-ID scheint nicht gültig zu sein. Es sollte eine 52 oder 56 stellige Zeichenkette aus Buchstaben und Nummern sein. Leerzeichen und Bindestriche sind optional.",
+    "The folder ID cannot be blank.": "Die Verzeichnis-ID darf nicht leer sein.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "Die Verzeichnis-ID muss eine kurze Kennung (64 Zeichen oder weniger) sein. Sie kann nur aus Buchstaben, Zahlen und den Punkt- (.), Strich- (-), und Unterstrich- (_) Zeichen bestehen.",
+    "The folder ID must be unique.": "Die Verzeichnis-ID muss eindeutig sein.",
+    "The folder path cannot be blank.": "Der Verzeichnis-Pfad kann nicht leer sein",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Es wird in folgenden Abständen versioniert: in der ersten Stunde wird alle 30 Sekunden eine Version behalten, am ersten Tag eine jede Stunde, in den ersten 30 Tagen eine jeden Tag, danach wird bis zum Höchstalter eine Version pro Woche beibehalten.",
     "The maximum age must be a number and cannot be blank.": "Das Höchstalter muss angegeben werden und eine Zahl sein.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Die längste Zeit, die alte Versionen vorgehalten werden (in Tagen, 0 bedeutet, alte Versionen für immer zu behalten).",
-    "The node ID cannot be blank.": "Die Knoten-ID darf nicht leer sein.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Die hier einzutragende Knoten-ID kann im \"Bearbeiten > Zeige ID\"-Dialog auf dem anderen Knoten gefunden werden. Leerzeichen und Striche sind optional (werden ignoriert).",
     "The number of old versions to keep, per file.": "Anzahl der alten Versionen, die von jeder Datei gespeichert werden sollen.",
     "The number of versions must be a number and cannot be blank.": "Die Anzahl von Versionen muss eine Zahl und darf nicht leer sein.",
-    "The repository ID cannot be blank.": "Die Verzeichnis-ID darf nicht leer sein.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "Die Verzeichnis-ID muss eine kurze Kennung (64 Zeichen oder weniger) sein. Sie kann nur aus Buchstaben, Zahlen und den Punkt- (.), Strich- (-), und Unterstrich- (_) Zeichen bestehen.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Die Verzeichnis-ID muss eine kurze Kennung (64 Zeichen oder weniger) sein. Sie kann aus Buchstaben, Zahlen und den Punkt- (.), Strich- (-), und Unterstrich- (_) Zeichen bestehen.",
-    "The repository ID must be unique.": "Die Verzeichnis-ID muss eindeutig sein.",
-    "The repository path cannot be blank.": "Der Verzeichnis-Pfad kann nicht leer sein",
     "The rescan interval must be at least 5 seconds.": "Das Suchintervall muss mindestens 5 Sekunden betragen.",
     "Unknown": "Unbekannt",
     "Up to Date": "Aktuell",
     "Upgrade To {%version%}": "Upgrade auf {{version}}",
     "Upgrading": "Wird aktualisiert",
     "Upload Rate": "Uploadgeschwindigkeit",
-    "Usage": "Benutzung",
     "Use Compression": "Benutze Komprimierung",
     "Use HTTPS for GUI": "Benutze HTTPS für Benutzeroberfläche",
     "Version": "Version",
     "Versions Path": "Versionierungspfad",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Alte Versionen werden automatisch gelöscht wenn sie älter als das angegebene Höchstalter sind oder die Höchstzahl der Dateien pro Zeitabschnitt überschritten wird.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Beachte beim Hinzufügen eines neuen Knotens, dass dieser Knoten auch auf der Gegenseite hinzugefügt werden muss.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Beim Hinzufügen eines neuen Verzeichnisses, beachte dass die Verzeichnis-ID dazu verwendet wird, Verzeichnisse zwischen Knoten zu verbinden. Die ID muss also auf allen Knoten gleich sein, Groß- und Kleinschreibung muss dabei beachtet werden.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Beachte beim Hinzufügen eines neuen Geträtes, dass dieses Gerät auch auf der Gegenseite hinzugefügt werden muss.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Beim Hinzufügen eines neuen Verzeichnisses, beachte dass die Verzeichnis-ID dazu verwendet wird, Verzeichnisse zwischen Geräten zu verbinden. Die ID muss also auf allen Geräten gleich sein, die Groß- und Kleinschreibung muss dabei beachtet werden.",
     "Yes": "Ja",
     "You must keep at least one version.": "Du musst mindestens eine Version behalten.",
     "full documentation": "Komplette Dokumentation",

gui/lang/lang-el.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "Κλειδί API",
-    "About": "Σχετικά",
-    "Add Node": "Προσθήκη Κόμβου",
-    "Add Repository": "Προσθήκη Αποθετηρίου",
-    "Address": "Διεύθυνση",
-    "Addresses": "Διευθύνσεις",
-    "Allow Anonymous Usage Reporting?": "Να επιτρέπεται Ανώνυμη Αποστολή Αναφοράς Χρήσης?",
-    "Announce Server": "Διακομιστής Αναγγελίας",
-    "Anonymous Usage Reporting": "Ανώνυμη Αναφορά Χρήσης",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Bugs",
-    "CPU Utilization": "Χρήση CPU",
-    "Close": "Τέλος",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Σφάλμα Σύνδεσης",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg και οι παρακάτω Συνεισφορείς:",
-    "Delete": "Διαγραφή",
-    "Disconnected": "Αποσυνδεδεμένος",
-    "Documentation": "Τεκμηρίωση",
-    "Download Rate": "Download Rate",
-    "Edit": "Επεξεργασία",
-    "Edit Node": "Επεξεργασία Κόμβου",
-    "Edit Repository": "Επεξεργασία Αποθετηρίου",
-    "Editing": "Editing",
-    "Enable UPnP": "Ενεργοποίηση UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Εισήγαγε διαχωρισμένα με κόμμα \"ip:port\" διευθύνσεις ή \"dynamic\", για να πραγματοποιηθεί η αυτόματη εξεύρεση διευθύνσεων.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Σφάλμα",
-    "File Versioning": "File Versioning",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Τα permission bits των αρχείων αγνοούνται όταν γίνεται αναζήτηση για αλλαγές. Χρήση σε FAT filesystems.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Όταν τα αρχεία αντικατασταθούν ή διαγραφούν από το syncthing, μεταφέρονται σε φάκελο .stversions με χρονική σήμανση.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Τα αρχεία προστατεύονται από αλλαγές που γίνονται σε άλλους κόμβους, αλλά όποιες αλλαγές γίνουν εδώ θα αποσταλούν στο όλο το cluster.",
-    "Folder": "Κατάλογος",
-    "GUI Authentication Password": "Κωδικός πιστοποίησης στο GUI",
-    "GUI Authentication User": "Χρήστης πιστοποίησης στο GUI",
-    "GUI Listen Addresses": "GUI Listen διευθύνσεις",
-    "Generate": "Δημιουργία",
-    "Global Discovery": "Global Discovery",
-    "Global Discovery Server": "Διακομιστής Ανεύρεσης Κόμβου",
-    "Global Repository": "Global Repository",
-    "Idle": "Ανενεργό",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Αγνόησε Δικαιώματα",
-    "Incoming Rate Limit (KiB/s)": "Incoming Rate Limit (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Διατήρησε Εκδόσεις",
-    "Last seen": "Last seen",
-    "Latest Release": "Τελευταία Έκδοση",
-    "Local Discovery": "Τοπική Ανεύρεση",
-    "Local Discovery Port": "Port Τοπικής Ανεύρεσης",
-    "Local Repository": "Τοπικό Αποθετήριο",
-    "Master Repo": "Master Repo",
-    "Max File Change Rate (KiB/s)": "Max File Change Rate (KiB/s)",
-    "Max Outstanding Requests": "Max Outstanding Requests",
-    "Maximum Age": "Maximum Age",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Never",
-    "No": "Αριθμός",
-    "No File Versioning": "No File Versioning",
-    "Node ID": "ID Κόμβου",
-    "Node Identification": "Ταυτοποίηση Κόμβου",
-    "Node Name": "Όνομα Κόμβου",
-    "Notice": "Notice",
-    "OK": "OK",
-    "Offline": "Ανεργό",
-    "Online": "Ενεργός",
-    "Out Of Sync": "Μη Συγχρονισμένα",
-    "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
-    "Override Changes": "Override Changes",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Μονοπάτι του αποθετηρίου στον τοπικό υπολογιστή. Σε περίπτωση που δεν υπάρχει, θα δημιουργηθεί. Ο χαρακτήρας tilde (~) μπορεί να χρησιμοποιηθεί σαν συντόμευση για",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
-    "Please wait": "Παρακαλώ περιμένετε",
-    "Preview": "Preview",
-    "Preview Usage Report": "Προεπισκόπηση αναφοράς χρήσης",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "Χρήση RAM",
-    "Reconnect Interval (s)": "Χρονικό διάστημα επανασύνδεσης (s)",
-    "Repository ID": "ID Αποθετηρίου",
-    "Repository Master": "Repository Master",
-    "Repository Path": "Μονοπάτι Αποθετηρίου",
-    "Rescan": "Rescan",
-    "Rescan Interval": "Rescan Interval",
-    "Rescan Interval (s)": "Χρονικό διάστημα Επανασάρρωσης (s)",
-    "Restart": "Επανεκκίνηση",
-    "Restart Needed": "Απαιτείται Επανεκκίνηση",
-    "Restarting": "Επανεκκίνηση",
-    "Save": "Αποθήκευση",
-    "Scanning": "Σάρρωση",
-    "Select the nodes to share this repository with.": "Επιλογή των κόμβων με τους οποίους θα διαμοιραστεί αυτό το αποθετήριο.",
-    "Settings": "Ρυθμίσεις",
-    "Share With Nodes": "Διαμοιρασμός με Κόμβους",
-    "Shared With": "Διαμοιρασμός με",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Σύντομη περιγραφή του αποθετηρίου. Θα πρέπει να είναι το ίδιο σε όλους τους κόμβους του cluster.",
-    "Show ID": "Εμφάνιση ID",
-    "Shown instead of Node ID in the cluster status.": "Εμφάνιση στη θέση του ID Αποθετηρίου, στην κατάσταση του cluster.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
-    "Shutdown": "Απενεργοποίηση",
-    "Simple File Versioning": "Simple File Versioning",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Πηγαίος Κώδικας",
-    "Staggered File Versioning": "Staggered File Versioning",
-    "Start Browser": "Έναρξη Φυλλομετρητή",
-    "Stopped": "Απενεργοποιημένο",
-    "Support / Forum": "Υποστήριξη / Forum",
-    "Sync Protocol Listen Addresses": "Sync Protocol Listen Addresses",
-    "Synchronization": "Συγχρονισμός",
-    "Syncing": "Συγχρονισμός",
-    "Syncthing has been shut down.": "Το Syncthing έχει απενεργοποιηθεί.",
-    "Syncthing includes the following software or portions thereof:": "Το Syncthing συμπεριλαμβάνει τα παρακάτω λογισμικά ή μέρη αυτών:",
-    "Syncthing is restarting.": "Το Syncthing επανεκκινεί.",
-    "Syncthing is upgrading.": "Το Syncthing αναβαθμίζεται.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Το Syncthing φαίνεται πως είναι απενεργοποιημένο ή υπάρχει πρόβλημα στη σύνδεσή σας στο Internet. Προσπάθεια ξανά…",
-    "The aggregated statistics are publicly available at {%url%}.": "Τα στατιστικά που έχουν συλλεγεί είναι διαθέσιμα στο κοινό, στο {{url}}.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Οι ρυθμίσεις έχουν αποθηκευτεί αλλά δεν έχουν ενεργοποιηθεί. Πρέπει να επανεκκινήσετε το Syncthing για να ισχύσουν οι νέες ρυθμίσεις.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Η κρυπτογραφημένη αναφοράς χρήσης στέλνεται καθημερινά. Χρησιμοποιείται ανίχνευση πληροφοριών πλατφόρμας, μεγέθους αποθετηρίων και εκδόσεων της εφαρμογής. Αν τα δεδομένα που αποστέλονται αλλάξουν, θα πληροφορηθείτε ξανά με αυτό το διάλογο.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Το ID Κόμβου που έχει εισαχθεί δεν είναι σωστό. Θα πρέπει να είναι αλφαριθμητικό 52 χαρακτήρων που να αποτελείται από γράμματα και αριθμούς, όπου τα κενά και οι παύλες είναι προαιρετικά.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Το ID Κόμβου δεν είναι έγκυρο. Θα πρέπει να είναι αλφαριθμιτικό με 52 ή 56 χαρακτήρες και να αποτελείται από γράμματα και αριθμούς, που προαιρετικά χωρίζονται με κενά και παύλες.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
-    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
-    "The node ID cannot be blank.": "Το ID Κόμβου δε μπορεί να είναι κενό.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Το ID Κόμβου μπορείτε να βρείτε στο μενού \"Επεξεργασία > Εμφάνιση ID\" του άλλου κόμβου. Κενά και παύλες είναι προαιρετικά (αγνοούνται).",
-    "The number of old versions to keep, per file.": "The number of old versions to keep, per file.",
-    "The number of versions must be a number and cannot be blank.": "Ο αριθμός εκδόσεων πρέπει να είναι αριθμός και σίγουρα όχι κενό.",
-    "The repository ID cannot be blank.": "Το ID Αποθετηρίου δε μπορεί να είναι κενό.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be unique.": "Το ID Αποθετηρίου πρέπει να είναι μοναδικό.",
-    "The repository path cannot be blank.": "Το μονοπάτι του αποθετηρίου δε μπορεί να είναι κενό.",
-    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
-    "Unknown": "Άγνωστο",
-    "Up to Date": "Ενημερωμένος",
-    "Upgrade To {%version%}": "Αναβάθμιση στην έκδοση {{version}}",
-    "Upgrading": "Αναβάθμιση",
-    "Upload Rate": "Upload Rate",
-    "Usage": "Usage",
-    "Use Compression": "Χρήση συμπίεσης",
-    "Use HTTPS for GUI": "Χρήση HTTPS για το GUI",
-    "Version": "Έκδοση",
-    "Versions Path": "Versions Path",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Προσθέτοντας έναν καινούργιο κόμβο, θυμηθείται πως θα πρέπει να προσθέσετε και τον παρόν κόμβο στην άλλη πλευρά.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Κατά την πρόσθεση νέου αποθετηρίου, να γνωρίζεται πως το ID Αποθετηρίου χρησιμοποιείται για να συνδέει Αποθετήρια μεταξύ κόμβων. Τα ID είναι case sensitive και θα πρέπει να είναι ταυτόσημα μεταξύ όλων των κόμβων.",
-    "Yes": "Ναι",
-    "You must keep at least one version.": "You must keep at least one version.",
-    "full documentation": "full documentation",
-    "items": "items"
-}

gui/lang/lang-es.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "Clave API",
-    "About": "Acerca de",
-    "Add Node": "Añadir nodo",
-    "Add Repository": "Añadir repositorio",
-    "Address": "Dirección",
-    "Addresses": "Direcciones",
-    "Allow Anonymous Usage Reporting?": "Permitir reporte anónimo de uso?",
-    "Announce Server": "Anunciar servidor",
-    "Anonymous Usage Reporting": "Reporte anónimo de uso",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Errores",
-    "CPU Utilization": "Uso de la CPU",
-    "Close": "Cerrar",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Error de conexión",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Derechos de autor © 2014 Jakob Borg y los siguientes  colaboradores:",
-    "Delete": "Suprimir",
-    "Disconnected": "Desconectado",
-    "Documentation": "Documentación",
-    "Download Rate": "Tasa de descarga",
-    "Edit": "Editar",
-    "Edit Node": "Editar nodo",
-    "Edit Repository": "Editar repositorio",
-    "Editing": "Editing",
-    "Enable UPnP": "Permitir UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Ingrese las direcciones \"ip:port\" separadas por coma o \"dynamic\" para descubrir automáticamente las direcciones.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Error",
-    "File Versioning": "Control de versiones",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Los permisos de archivo son ignorados al buscar cambios. Usar en sistemas de archivos FAT.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Los archivos son movidos al directorio .stversions y renombrados a versiones marcadas por fecha cuando son reemplazados o eliminados por Syncthing,",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Los archivos están protegidos de cambios en otros nodos, pero los cambios realizados en este nodo serán enviados al resto de los nodos.",
-    "Folder": "Carpeta",
-    "GUI Authentication Password": "Contraseña de autenticación de la GUI",
-    "GUI Authentication User": "Usuario de la GUI",
-    "GUI Listen Addresses": "Direcciones de escucha para la GUI.",
-    "Generate": "Generar",
-    "Global Discovery": "Búsqueda en internet",
-    "Global Discovery Server": "Servidor global de identificación",
-    "Global Repository": "Repositorio global",
-    "Idle": "Inactivo",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Ignorar permisos",
-    "Incoming Rate Limit (KiB/s)": "Límite de velocidad de entrada (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Conservar versiones",
-    "Last seen": "Visto por ultima vez",
-    "Latest Release": "Última versión",
-    "Local Discovery": "Búsqueda en red local",
-    "Local Discovery Port": "Puerto de búsqueda de red local",
-    "Local Repository": "Repositorio local.",
-    "Master Repo": "Repositorio maestro",
-    "Max File Change Rate (KiB/s)": "Tasa máxima de cambios (KiB/s)",
-    "Max Outstanding Requests": "Cantidad máxima de peticiones pendientes",
-    "Maximum Age": "Edad máxima",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Nunca",
-    "No": "No",
-    "No File Versioning": "Sin control de versiones de archivos",
-    "Node ID": "Nodo ID",
-    "Node Identification": "Identificador del nodo",
-    "Node Name": "Nodo nombre",
-    "Notice": "Aviso",
-    "OK": "OK",
-    "Offline": "Fuera de linea",
-    "Online": "En linea",
-    "Out Of Sync": "Fuera de sincronización",
-    "Outgoing Rate Limit (KiB/s)": "Tasa máxima de envío (KiB/s)",
-    "Override Changes": "Reemplazar los cambios",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta del repositorio en el equipo local. La carpeta sera creada si no existe. El carácter tilde (~) puede ser utilizado como atajo de ",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Ruta donde se deben almacenar versiones (dejar vacío para la carpeta .stversions predeterminada en el repositorio).",
-    "Please wait": "Aguarde por favor",
-    "Preview": "Vista previa",
-    "Preview Usage Report": "Ver reporte de uso",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "Utilización de RAM",
-    "Reconnect Interval (s)": "Intervalo de reconexión (s)",
-    "Repository ID": "ID de repositorio",
-    "Repository Master": "Repositorio maestro",
-    "Repository Path": "Ruta del repositorio",
-    "Rescan": "Rescan",
-    "Rescan Interval": "Rescan Interval",
-    "Rescan Interval (s)": "Intervalo de reescaneo (s)",
-    "Restart": "Reiniciar",
-    "Restart Needed": "Es necesario reiniciar",
-    "Restarting": "Reiniciando",
-    "Save": "Guardar",
-    "Scanning": "Actualización",
-    "Select the nodes to share this repository with.": "Seleccione los nodos con los cuales compartir el repositorio.",
-    "Settings": "Configuración",
-    "Share With Nodes": "Compartir con los nodos",
-    "Shared With": "Compartido con",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Identificador corto para el repositorio. Debe ser el mismo en todos los nodos del clúster.",
-    "Show ID": "Mostrar ID",
-    "Shown instead of Node ID in the cluster status.": "Mostrar en lugar de ID de nodo en estado de cluster.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
-    "Shutdown": "Apagar",
-    "Simple File Versioning": "Versiones simple de archivos",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Código fuente",
-    "Staggered File Versioning": "Versiones del archivo escalonado",
-    "Start Browser": "Iniciar navegador",
-    "Stopped": "Parado",
-    "Support / Forum": "Soporte / Foro",
-    "Sync Protocol Listen Addresses": "Dirección de escucha del protocolo de sincronización",
-    "Synchronization": "Sincronización",
-    "Syncing": "Sincronización",
-    "Syncthing has been shut down.": "La sincronización esta apagada",
-    "Syncthing includes the following software or portions thereof:": "Syncthing incluye los siguientes softwares o partes de ellos:",
-    "Syncthing is restarting.": "Syncthing está reiniciando.",
-    "Syncthing is upgrading.": "Syncthing se está actualizando.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing parece estar apagado, o hay un problema con su conexión de Internet. Reintentando...",
-    "The aggregated statistics are publicly available at {%url%}.": "Las estadísticas acumuladas están públicamente disponibles en {{url}}.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuración ha sido guardada pero no activada.\nSyncthing debe reiniciarse para activar la nueva configuración.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "El reporte de uso se envía encriptado diariamente. Se utiliza para hacer un seguimiento de plataformas comunes, tamaño de repositorios y versión de aplicaciones. Si el conjunto de datos cambia sera notificado mediante este dialogo nuevamente.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "El ID de nodo ingresado no es valido. Debe ser una cadena  de al menos 52 caracteres consistente en letras y números, con espacios y guiones opcionales.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "El ID de nodo ingresado no es valido. Debe ser una cadena de 52 o de 56 caracteres consistente en letras y números, con espacios y guiones opcionales.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Los siguientes intervalos se utilizan: para la primera hora una versión se mantiene cada 30 segundos, para el primer día de una versión se mantiene cada hora, durante los primeros 30 días de la versión se mantiene todos los días, hasta que la edad máxima de una versión se mantiene cada semana.",
-    "The maximum age must be a number and cannot be blank.": "La edad máxima debe ser un número y no puede estar en blanco.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "El tiempo máximo para mantener una versión (en días, establece en 0 para mantener versiones para siempre).",
-    "The node ID cannot be blank.": "El ID de nodo no puede estar vacío.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "El ID de nodo a ingresar aquí puede verse en la opción de menú \"Edición > Mostrar ID\" del otro nodo. Espacios y guiones son opcionales (ignorados).",
-    "The number of old versions to keep, per file.": "El numero de versiones anteriores a conservar, por archivo.",
-    "The number of versions must be a number and cannot be blank.": "El número de versiones debe ser un número y no puede estar vacío.",
-    "The repository ID cannot be blank.": "El ID de repositorio no puede estar vacio.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "El ID de repositorio debe ser una cadena corta (64 caracteres o menos) consistente solamente en letras, números, punto (.), guion (-) y guion bajo (_).",
-    "The repository ID must be unique.": "El ID de repositorio debe ser único.",
-    "The repository path cannot be blank.": "La ruta del repositorio no puede estar vacía.",
-    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
-    "Unknown": "Desconocido",
-    "Up to Date": "Actualizado",
-    "Upgrade To {%version%}": "Actualizar a {{version}}",
-    "Upgrading": "Actualizando",
-    "Upload Rate": "Tasa de subida",
-    "Usage": "Utilización",
-    "Use Compression": "Usar compresión",
-    "Use HTTPS for GUI": "Usar HTTPS para la GUI",
-    "Version": "Versión",
-    "Versions Path": "Ruta de versiones",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Las versiones se eliminan automáticamente si son mayores de la edad máxima o mayor que el número de archivos permitidos en un intervalo.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Al agregar un nuevo nodo, recuerde que este nodo debe ser agregado en el otro lado también.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Al agregar un nuevo repositorio, tenga en mente que el ID de repositorio se utiliza para ligar los repositorios entre nodos. Distingue mayúsculas y minúsculas y debe ser exactamente igual en todos los nodos.",
-    "Yes": "Si",
-    "You must keep at least one version.": "Debe mantener al menos una versión",
-    "full documentation": "full documentation",
-    "items": "Articulos"
-}

gui/lang/lang-fr.json

@@ -1,68 +1,65 @@
 {
     "API Key": "Clé API",
     "About": "À propos",
-    "Add Node": "Ajouter un nœud",
-    "Add Repository": "Ajouter un répertoire",
+    "Add Device": "Ajouter un périphérique",
+    "Add Folder": "Ajouter un répertoire",
     "Address": "Adresse",
     "Addresses": "Adresses",
     "Allow Anonymous Usage Reporting?": "Autoriser le rapport anonyme de statistiques d'utilisation ?",
-    "Announce Server": "Serveur d'annonce",
     "Anonymous Usage Reporting": "Rapport anonyme de statistiques d'utilisation",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Tout appareil ajouté depuis un appareil initiateur sera aussi ajouté sur cet appareil.",
     "Bugs": "Bugs",
     "CPU Utilization": "Utilisation du CPU",
     "Close": "Fermer",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Comment, when used at the start of a line": "Commentaire, lorsque utilisé en début de ligne",
+    "Compression is recommended in most setups.": "La compression est recommandée pour la plupart des configurations.",
     "Connection Error": "Erreur de connexion",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg et les contributeurs suivants :",
     "Delete": "Supprimer",
+    "Device ID": "ID de l'appareil",
+    "Device Identification": "Identification de l'appareil",
+    "Device Name": "Nom de l'appareil",
     "Disconnected": "Déconnecté",
     "Documentation": "Documentation",
     "Download Rate": "Débit de réception",
     "Edit": "Éditer",
-    "Edit Node": "Éditer le nœud",
-    "Edit Repository": "Éditer le répertoire",
-    "Editing": "Editing",
+    "Edit Device": "Éditer l'appareil",
+    "Edit Folder": "Éditer le répertoire",
+    "Editing": "Édition",
     "Enable UPnP": "Activer l'UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses \"ip:port\" séparées par une virgule ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
+    "Enter ignore patterns, one per line.": "Entrer les modèles à ignorer, un par ligne.",
     "Error": "Erreur",
     "File Versioning": "Versions de fichier",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Les permissions de fichier sont ignorées lors de la recherche de changements. À utiliser sur les systèmes de fichiers de type FAT.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Les fichiers sont datés et déplacés dans le dossier .stversions lors de leur remplacement ou suppression par syncthing.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Les fichiers sont protégés des changements réalisés sur les autres nœuds, mais les changements réalisés sur ce nœud seront transférés au reste du cluster.",
-    "Folder": "Dossier",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Les fichiers sont protégés des changements réalisés sur les autres appareils, mais les changements réalisés sur cet appareil seront transférés au reste du groupe.",
+    "Folder ID": "ID du répertoire",
+    "Folder Master": "Répertoire maître",
+    "Folder Path": "Chemin du répertoire",
     "GUI Authentication Password": "Mot de passe d'authentification GUI",
     "GUI Authentication User": "Utilistateur autorisé GUI",
     "GUI Listen Addresses": "Adresse du GUI",
     "Generate": "Générer",
     "Global Discovery": "Recherche globale",
     "Global Discovery Server": "Serveur global de recherche",
-    "Global Repository": "Répertoire global",
+    "Global State": "Etat global",
     "Idle": "Au repos",
-    "Ignore Patterns": "Ignore Patterns",
+    "Ignore Patterns": "Modèles à éviter",
     "Ignore Permissions": "Ignorer les permissions",
     "Incoming Rate Limit (KiB/s)": "Limite du débit entrant (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
+    "Introducer": "Initiateur",
+    "Inversion of the given condition (i.e. do not exclude)": "Inverser la condition donnée (i.e. ne pas exclure)",
     "Keep Versions": "Conserver les versions",
     "Last seen": "Dernière apparition",
     "Latest Release": "Dernière version",
     "Local Discovery": "Recherche locale",
-    "Local Discovery Port": "Port de recherche locale",
-    "Local Repository": "Dossier local",
-    "Master Repo": "Dossier maître",
-    "Max File Change Rate (KiB/s)": "Débit maximum de changement de fichier (KiB/s)",
-    "Max Outstanding Requests": "Nombre maximum de demandes concurrentes de blocs de fichier",
+    "Local State": "Etat local",
     "Maximum Age": "Ancienneté maximum",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
+    "Multi level wildcard (matches multiple directory levels)": "Astérisque à plusieurs niveaux (correspond aux répertoires et sous-répertoires)",
     "Never": "Jamais",
     "No": "Non",
     "No File Versioning": "Pas de version de fichier",
-    "Node ID": "ID du nœud",
-    "Node Identification": "Identification du nœud",
-    "Node Name": "Nom du nœud",
     "Notice": "Notification",
     "OK": "OK",
     "Offline": "Offline",
@@ -70,37 +67,31 @@
     "Out Of Sync": "Non synchronisé",
     "Outgoing Rate Limit (KiB/s)": "Limite du débit sortant (KiB/s)",
     "Override Changes": "Écraser les changements",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Chemin du répertoire sur l'ordinateur local. Il sera créé si il n'existe pas. Le caractère tilde (~) peut être utilisé comme raccourci vers",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Chemin où les versions doivent être conservées (laisser vide pour le chemin par défaut de .stversions dans le répertoire)",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Chemin du répertoire sur l'ordinateur local. Il sera créé si il n'existe pas. Le caractère tilde (~) peut être utilisé comme raccourci vers",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Chemin où les versions doivent être conservées (laisser vide pour le chemin par défaut de .stversions dans le répertoire)",
     "Please wait": "Merci de patienter",
     "Preview": "Aperçu",
     "Preview Usage Report": "Aperçu du rapport de statistiques d'utilisation",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
+    "Quick guide to supported patterns": "Guide rapide des modèles supportés",
     "RAM Utilization": "Utilisation de la RAM",
-    "Reconnect Interval (s)": "Intervalle de reconnexion (s)",
-    "Repository ID": "ID du répertoire",
-    "Repository Master": "Répertoire maître",
-    "Repository Path": "Chemin du répertoire",
     "Rescan": "Rescanner",
     "Rescan Interval": "Intervalle de scan",
-    "Rescan Interval (s)": "Intervalle de rescan (s)",
     "Restart": "Redémarrer",
     "Restart Needed": "Redémarrage nécessaire",
     "Restarting": "Redémarrage",
     "Save": "Sauver",
     "Scanning": "En cours de scan",
-    "Select the nodes to share this repository with.": "Sélectionner les nœuds qui partagent ce répertoire.",
+    "Select the devices to share this folder with.": "Sélectionner les appareils avec qui partager ce répertoire.",
     "Settings": "Configuration",
-    "Share With Nodes": "Partager avec les nœuds",
+    "Share With Devices": "Partager avec les appareils",
     "Shared With": "Partagé avec",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Identifiant court pour le répertoire. Il doit être le même sur l'ensemble des nœuds du cluster.",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Court identifiant du répertoire. Il doit être le même sur l'ensemble des appareils du groupe.",
     "Show ID": "Montrer l'ID",
-    "Shown instead of Node ID in the cluster status.": "Affiché à la place de l'ID du nœud au sein du cluster.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Affiché à la place de l'ID du nœud dans le statut du cluster. Sera annoncé aux autres nœuds comme un nom par défaut optionnel.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Affiché à la place de l'ID du nœud dans le statut du cluster. Sera mis à jour par le nom que le nœud annonce si laissé vide.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Affiché à la place de l'ID de l'appareil dans le statut du groupe. Sera proposé aux autres nœuds comme un nom par défaut optionnel.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Affiché à la place de l'ID de l'appareil dans le statut du groupe. Si laissé vide, il sera changé par le nom proposé par l'appareil.",
     "Shutdown": "Éteindre",
     "Simple File Versioning": "Versions simples de fichier",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
+    "Single level wildcard (matches within a directory only)": "Astérisque à un seul niveau (correspond uniquement à l’intérieur du répertoire)",
     "Source Code": "Code source",
     "Staggered File Versioning": "Versions échelonnées de fichier",
     "Start Browser": "Démarrer le navigateur web",
@@ -116,37 +107,34 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing semble être éteint, ou il y a un problème avec votre connexion Internet. Nouvelle tentative ...",
     "The aggregated statistics are publicly available at {%url%}.": "Les statistiques agrégées sont disponibles publiquement à l'adresse {{url}}.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuration a été sauvée mais pas activée. Syncthing doit redémarrer afin d'activer la nouvelle configuration.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Le rapport d'utilisation chiffré est envoyé quotidiennement. Il sert à répertorier les plateformes utilisées, la taille des répertoires et les versions de l'application. Si le jeu de données rapportées devait être changé, il vous sera demandé de le valider de nouveau via ce dialogue.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID du nœud ne semble pas être valide. Il devrait ressembler à une chaine de 52 caractères comprenant lettres et chiffres, avec des espaces et des traits d'union optionnels.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID du nœud inséré ne semble pas être valide. Il devrait ressembler à une chaîne de 52 ou 56 comprenant lettres et chiffres, avec des espaces et des traits d'union optionnels.",
+    "The device ID cannot be blank.": "L'ID de l'appareil ne peut être vide.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "L'ID de l'appareil à renseigner peut être trouvé dans le menu \"Éditer > Montrer l'ID\" des autres nœuds. Les espaces et les tirets sont optionnels (ils seront ignorés).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Le rapport d'utilisation chiffré est envoyé quotidiennement. Il sert à répertorier les plateformes utilisées, la taille des répertoires et les versions de l'application. Si les données rapportées sont modifiées cette boite de dialogue vous redemandera votre confirmation.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID de l'appareil inséré ne semble pas être valide. Il devrait ressembler à une chaîne de 52 ou 56 caractères comprenant des lettres, des chiffres et potentiellement des espaces et des traits d'union.",
+    "The folder ID cannot be blank.": "L'ID du répertoire ne peut être vide.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "L'ID du répertoire doit être un identifiant court (64 caractères ou moins) comprenant uniquement des lettres, nombres, points (.), traits d'union (-) et tirets bas (_).",
+    "The folder ID must be unique.": "L'ID du répertoire doit être unique.",
+    "The folder path cannot be blank.": "Le chemin du répertoire ne peut pas être vide.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Les intervalles suivant sont utilisés: la première heure une version est conservée chaque 30 secondes, le premier jour une version est conservée chaque heure, les premiers 30 jours une version est conservée chaque jour, jusqu'à la limite d'âge maximum une version est conservée chaque semaine.",
     "The maximum age must be a number and cannot be blank.": "L'ancienneté maximum doit être un nombre et ne peut être vide.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Le temps maximum de conservation d'une version (en jours, mettre à 0 pour conserver les versions pour toujours)",
-    "The node ID cannot be blank.": "L'ID du nœud ne peut être vide.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "L'ID du nœud à insérer peut être trouvé à travers le menu \"Éditer > Montrer l'ID\" des autres nœuds. Les espaces et les traits d'union sont optionnels (ils seront ignorés).",
     "The number of old versions to keep, per file.": "Le nombre d'anciennes versions à garder, par fichier.",
     "The number of versions must be a number and cannot be blank.": "Le nombre de version doit être un nombre et ne peut pas être vide.",
-    "The repository ID cannot be blank.": "L'ID du répertoire ne peut être vide.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "L'ID du répertoire doit être un identifiant court (64 caractères ou moins) comprenant des lettres, nombres, points (.), trait d'union (-) et tiret bas (_).",
-    "The repository ID must be unique.": "L'ID du répertoire doit être unique.",
-    "The repository path cannot be blank.": "Le chemin du répertoire ne peut pas être vide.",
     "The rescan interval must be at least 5 seconds.": "L'intervalle de scan doit être d'au minimum 5 secondes.",
     "Unknown": "Inconnu",
     "Up to Date": "Synchronisation à jour",
     "Upgrade To {%version%}": "Mettre à jour vers {{version}}",
     "Upgrading": "Mise à jour de Syncthing",
     "Upload Rate": "Débit d'envoi",
-    "Usage": "Utilisation",
     "Use Compression": "Utiliser la compression",
     "Use HTTPS for GUI": "Utiliser l'HTTPS pour le GUI",
     "Version": "Version",
     "Versions Path": "Emplacement des versions",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les versions sont supprimées automatiquement si celles-ci sont plus anciennes que l'ancienneté maximum ou que leur nombre est supérieur au nombre autorisé dans une intervale.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Lorsqu'un nœud est ajouté, gardez à l'esprit que ce nœud doit aussi être ajouté de l'autre coté.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Lorsqu'un nouveau répertoire est ajouté, gardez à l'esprit que l'ID du répertoire est utilisé pour lier les répertoires à travers les nœuds. Ils sont sensibles à la casse et doivent être identiques à travers tous les nœuds.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Lorsqu'un appareil est ajouté, gardez à l'esprit que cet appareil doit aussi être ajouté de l'autre coté.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lorsqu'un nouveau répertoire est ajouté, gardez à l'esprit que son ID est utilisé pour lier les répertoires à travers les appareils. Les ID sont sensibles à la casse et doivent être identiques à travers tous les nœuds.",
     "Yes": "Oui",
     "You must keep at least one version.": "Vous devez garder au minimum une version.",
-    "full documentation": "full documentation",
+    "full documentation": "documentation complète",
     "items": "éléments"
 }

gui/lang/lang-hu.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "API kulcs",
-    "About": "Névjegy",
-    "Add Node": "Csomópont hozzáadása",
-    "Add Repository": "Tároló hozzáadása",
-    "Address": "Cím",
-    "Addresses": "Címek",
-    "Allow Anonymous Usage Reporting?": "Engedélyezed a névtelen felhasználási statisztikai adatok küldését?",
-    "Announce Server": "Cím hirdető szerver",
-    "Anonymous Usage Reporting": "Névtelen felhasználási statisztikák küldése",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Hibák",
-    "CPU Utilization": "Processzor használat",
-    "Close": "Bezárás",
-    "Comment, when used at the start of a line": "Megjegyzés, a sor elején használva",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Kapcsolódási hiba",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg és a következő Közreműködők",
-    "Delete": "Törlés",
-    "Disconnected": "Kapcsolat bontása",
-    "Documentation": "Dokumentáció",
-    "Download Rate": "Letöltési sebesség",
-    "Edit": "Szerkesztés",
-    "Edit Node": "Csomópont szerkesztése",
-    "Edit Repository": "Tároló szerkesztése",
-    "Editing": "Szerkesztés",
-    "Enable UPnP": "UPnP engedélyezése",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Add meg kettősponttal elválasztva \"ip:port\" a címet vagy add meg a \"dynamic\" szót az a cím automatikus észleléséhez.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Hiba",
-    "File Versioning": "File verziózás",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "A file jogosultásgok figyelmen kívül hagyása. FAT file-rendszernél haszálatos.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "A file-ok időpecsételt verziói a .stversions mappában kerülnek áthelyezésre, amikor felülírásra vagy törlésre kerülnek a Síncthing által.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "A file-ok védve lesznek, a többi csomóponton történt változástól, de ezen a csomóponton történt változás el lesz küldve a többi csomópontra.",
-    "Folder": "Mappa",
-    "GUI Authentication Password": "GUI jelszó",
-    "GUI Authentication User": "GUI felhastnáló",
-    "GUI Listen Addresses": "GUI port",
-    "Generate": "Generálás",
-    "Global Discovery": "Globális csomópont keresés",
-    "Global Discovery Server": "Globális csomópont kereséshez használt szerver",
-    "Global Repository": "Globális tároló",
-    "Idle": "Tétlen",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Jogosultságok figyelmen kívül hagyása",
-    "Incoming Rate Limit (KiB/s)": "Bejövő sebesség korlát (KIB/mp)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Verziók megtartása",
-    "Last seen": "Utoljára látva",
-    "Latest Release": "Utolsó kiadás",
-    "Local Discovery": "Helyi csomópont keresés",
-    "Local Discovery Port": "Helyi csomópont keresés port-ja",
-    "Local Repository": "Helyi tároló",
-    "Master Repo": "Központi tároló",
-    "Max File Change Rate (KiB/s)": "Maximális file változás sebessége (KiB/mp)",
-    "Max Outstanding Requests": "Maximális kimenő kérés",
-    "Maximum Age": "Maximális kor",
-    "Multi level wildcard (matches multiple directory levels)": "Több szintű joker (több könyvtár szintre érvényesül)",
-    "Never": "Soha",
-    "No": "Nem",
-    "No File Versioning": "Nincs file verziózás",
-    "Node ID": "Csomópont azonosító",
-    "Node Identification": "Csomópont azonosítás",
-    "Node Name": "Csomópont név",
-    "Notice": "Megjegyzés",
-    "OK": "Rendben",
-    "Offline": "Nincs kpcsolat",
-    "Online": "Kapcsolódva",
-    "Out Of Sync": "Nincs szinkronban",
-    "Outgoing Rate Limit (KiB/s)": "Kimenő sávszélesség (KiB/mp)",
-    "Override Changes": "Változtatások felülbírálása",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "A tároló útvonala ezen a számítógépen. Amennyiben nem létezik automatikusan létrehozzuk. A hullámvonal (~) karakter használható a rövidítésre",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Az útvonal ahol a régi verziókat tároljuk (ha üresen hagyod akkor .stversions mappa lesz a neve).",
-    "Please wait": "Kérem várj",
-    "Preview": "Előnézet",
-    "Preview Usage Report": "Felhasználási adatok átnézése",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "Memória használat",
-    "Reconnect Interval (s)": "Újracsatlakozási intervallum (mp)",
-    "Repository ID": "Tároló azonosító",
-    "Repository Master": "Központi tároló",
-    "Repository Path": "Tároló útvonala",
-    "Rescan": "Újraátvizsgálás",
-    "Rescan Interval": "Átnézési intervallum",
-    "Rescan Interval (s)": "Átnézési intervallum (mp)",
-    "Restart": "Újraindítás",
-    "Restart Needed": "Újraindítás szükséges",
-    "Restarting": "Újraindulás",
-    "Save": "Mentés",
-    "Scanning": "Átnézés",
-    "Select the nodes to share this repository with.": "Válaszd ki a csomópontokat amikkel a tárolót megosszuk",
-    "Settings": "Beállítások",
-    "Share With Nodes": "Megosztás a csomópontokkal",
-    "Shared With": "Megosztva velük",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "A tároló rövid azonosítója. Ugyanannak kell lennie minden fürtbeli csomóponton.",
-    "Show ID": "Azonosító mutatáas",
-    "Shown instead of Node ID in the cluster status.": "A csomópont azonosító helyett jelenik meg a fürt állapotánál.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "A csomópont azonosító helyett jelenik meg a fürtben a státusznál. A csomópontoknak ez is hirdetve lesz, mint opcionális alapértelmezett név.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "A csomópont azonosító helyett jelenik meg a fürtben a státusznál. A csomópont neve a hirdetettre lesz llítva amennyiben az üresen van hagyva.",
-    "Shutdown": "Leállítás",
-    "Simple File Versioning": "Egyszerű file verziózás",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Forráskód",
-    "Staggered File Versioning": "Többszintű file verziózás",
-    "Start Browser": "Böngésző indítása",
-    "Stopped": "Leállítva",
-    "Support / Forum": "Támogatás / Fórum",
-    "Sync Protocol Listen Addresses": "Szinkronizációs protokoll hallgatózási címe",
-    "Synchronization": "Szinkronizálás",
-    "Syncing": "Syncthing",
-    "Syncthing has been shut down.": "Syncthing leállítva",
-    "Syncthing includes the following software or portions thereof:": "Syncthing a következő programokat, vagy programkomponenseket tartalmazza.",
-    "Syncthing is restarting.": "Syncthing újraindul",
-    "Syncthing is upgrading.": "Syncthing frissül",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "A Syncthing úgy tűnik, hogy nem működik, vagy valami probléma van az hálózati kapcsolattal. Újra próbálom...",
-    "The aggregated statistics are publicly available at {%url%}.": "Az összevont statisztikák nyilvánosan elérhetők a {{url}} címen.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "A beállítások ok elmentésre kerültek, de nem lettek aktiválva. Indítsad újra a Syncthing-et, hogy aktíváld őket.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "A titkosított felhasználási jelentés naponta kerül elküldésre. Arra használjuk, hogy a futtató platformot, tároló méreteket illetve program verziókat kövessük nyomon. Amennyiben ez változik akkor újra meg fog jelenni ez az ablak.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "A beírt csomópont azonosító nem tűnik megfelelőnek. 52 karakter hosszúnak kell lennie és csak számokat illetve betűket tartalmazhat, amit szóközök illetve kötőjelek tagolhatnak.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "A beírt csomópont azonosító nem tűnik megfelelőnek. 52 vagy 56 karakteresnek kell lennie csak számot és betűt kell tartalmaznia és szóközökkel vagy kötőjelekkel lehet tagolva.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "A következő intervallumokat használjuk: egy-egy régi verziót őrzünk meg az első órában minden 30 másodpercben, az első nap minden órában, az első 30 napban minden nap, egészen addig amíg el nem érjük a maximálisan megtartható verziók számát minden héten.",
-    "The maximum age must be a number and cannot be blank.": "A maximális kornak számnak kell lenni és nem lehet üres",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "A verziók megtartásának maximális ideje (napokban, ha 0-t adsz meg örökre megmaradnak).",
-    "The node ID cannot be blank.": "A csomópont azonosító nem lehet üres",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "A csomópont azonosító a túloldalon a \"Beállítások > Azonosító mutatása\" alatt található. A szóközök illetve a kötőjelek opcionálisak (kihagyhatóak). ",
-    "The number of old versions to keep, per file.": "Mennyi régi változatot tartsunk meg a file-okból",
-    "The number of versions must be a number and cannot be blank.": "A megtartott változatok száma nem lehet üres",
-    "The repository ID cannot be blank.": "A tároló azonosító nem lehet üres",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "A tároló azonosító egy rövid (maximálisan 64 karakteres) csak számokat, betűket, pontot (.), kötőjelet (-) illetve aláhúzást (_) tartalmazó karakterlánc.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "A tároló azonosító egy rövid (maximálisan 64 karakteres) csak számokat, betűket, pontot (.), kötőjelet (-) illetve aláhúzást (_) tartalmazó karakterlánc",
-    "The repository ID must be unique.": "A tároló azonosítónak egyedinek kell lennie",
-    "The repository path cannot be blank.": "A tároló útvonala nem lehet üres",
-    "The rescan interval must be at least 5 seconds.": "Az átnézési intervallumbak legalább 5 másodpercnek kell lennie.",
-    "Unknown": "Ismeretlen",
-    "Up to Date": "Friss",
-    "Upgrade To {%version%}": "Frissítés a {{version}} verzióra",
-    "Upgrading": "Frissítés",
-    "Upload Rate": "Feltöltési sebesség",
-    "Usage": "Használat",
-    "Use Compression": "Tömörítés használata",
-    "Use HTTPS for GUI": "HTTPS használata a GUI-hoz",
-    "Version": "Verzió",
-    "Versions Path": "Verziók útvonala",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "A régi verziók automatikusan törlődnek, amennyiben öregebbek mint a maximum kor, vagy már több van belőlük mint az adott intervallumban megtartható maximum.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Amikor új csomópontot adsz hozzá, tartsd észben, hogy azt a túloldalhoz is hozzá kell majd adni.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Amikor hozzáadod a tárolót, tartsad észben, hogy a Tároló azonosító az ami összeköti a csomópontokat. Kis-nagybetű érzékeny, és pontosan ugyan úgy kell azokat megadni mindegyik csomóponton.",
-    "Yes": "Igen",
-    "You must keep at least one version.": "Legalább egy verziót meg kell tartanod",
-    "full documentation": "teljes dokumentáció",
-    "items": "tételek"
-}

gui/lang/lang-it.json

@@ -1,14 +1,13 @@
 {
     "API Key": "Chiave API",
     "About": "Informazioni",
-    "Add Node": "Aggiungi Nodo",
-    "Add Repository": "Aggiungi Deposito",
+    "Add Device": "Aggiungi Dispositivo",
+    "Add Folder": "Aggiungi Cartella",
     "Address": "Indirizzo",
     "Addresses": "Indirizzi",
     "Allow Anonymous Usage Reporting?": "Abilitare Statistiche Anonime di Utilizzo?",
-    "Announce Server": "Server di Presenza Globale dei Nodi",
     "Anonymous Usage Reporting": "Statistiche Anonime di Utilizzo",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
     "Bugs": "Bug",
     "CPU Utilization": "Utilizzo CPU",
     "Close": "Chiudi",
@@ -17,12 +16,15 @@
     "Connection Error": "Errore di Connessione",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg e i seguenti Collaboratori:",
     "Delete": "Elimina",
+    "Device ID": "ID Dispositivo",
+    "Device Identification": "Identificazione Dispositivo",
+    "Device Name": "Nome Dispositivo",
     "Disconnected": "Disconnesso",
     "Documentation": "Documentazione",
     "Download Rate": "Velocità Download",
     "Edit": "Modifica",
-    "Edit Node": "Modifica Nodo",
-    "Edit Repository": "Modifica Deposito",
+    "Edit Device": "Modifica Dispositivo",
+    "Edit Folder": "Modifica Cartella",
     "Editing": "Editing",
     "Enable UPnP": "Attiva UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Inserisci gli indirizzi \"ip:porta\" separati da una virgola, altrimenti inserisci \"dynamic\" per effettuare il rilevamento automatico dell'indirizzo.",
@@ -31,15 +33,17 @@
     "File Versioning": "Controllo Versione dei File",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Il software evita i bit dei permessi dei file durante il controllo delle modifiche. Utilizzato nei filesystem FAT.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "I file sostituiti o eliminati da syncthing vengono datati e spostati in una cartella .stversions .",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "I file sono protetti dalle modifiche effettuate negli altri nodi, ma le modifiche effettuate in questo nodo verranno inviate anche al resto del cluster.",
-    "Folder": "Cartella",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "I file sono protetti dalle modifiche effettuate negli altri dispositivi, ma le modifiche effettuate in questo dispositivo verranno inviate anche al resto del cluster.",
+    "Folder ID": "ID Cartella",
+    "Folder Master": "Cartella Principale",
+    "Folder Path": "Percorso Cartella",
     "GUI Authentication Password": "Password di Autenticazione dell'Utente",
     "GUI Authentication User": "Utente dell'Interfaccia Grafica",
     "GUI Listen Addresses": "Indirizzi dell'Interfaccia Grafica",
     "Generate": "Genera",
     "Global Discovery": "Individuazione Globale",
     "Global Discovery Server": "Server di Ricerca Globale",
-    "Global Repository": "Deposito Globale",
+    "Global State": "Global State",
     "Idle": "Inattivo",
     "Ignore Patterns": "Ignore Patterns",
     "Ignore Permissions": "Ignora Permessi",
@@ -50,19 +54,12 @@
     "Last seen": "Last seen",
     "Latest Release": "Ultima Versione",
     "Local Discovery": "Individuazione Locale",
-    "Local Discovery Port": "Porta di Individuazione Locale",
-    "Local Repository": "Deposito Locale",
-    "Master Repo": "Deposito Principale",
-    "Max File Change Rate (KiB/s)": "Tasso Massimo di Cambiamento dei File (KiB/s)",
-    "Max Outstanding Requests": "Numero Massimo di Richieste Simultanee per i Blocchi di File",
+    "Local State": "Local State",
     "Maximum Age": "Durata Massima",
     "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Never",
+    "Never": "Mai",
     "No": "No",
     "No File Versioning": "Nessun Controllo Versione",
-    "Node ID": "ID Nodo",
-    "Node Identification": "Identificazione Nodo",
-    "Node Name": "Nome Nodo",
     "Notice": "Avviso",
     "OK": "OK",
     "Offline": "Non in linea",
@@ -70,34 +67,28 @@
     "Out Of Sync": "Non Sincronizzati",
     "Outgoing Rate Limit (KiB/s)": "Limite di Velocità in Uscita (KiB/s)",
     "Override Changes": "Ignora Modifiche",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Percorso del deposito nel computer locale. Verrà creato se non esiste già. Il carattere tilde (~) può essere utilizzato come scorciatoia per",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Percorso di salvataggio delle versioni (lasciare vuoto per utilizzare la cartella predefinita .stversions nel deposito).",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Path where versions should be stored (leave empty for the default .stversions folder in the folder).",
     "Please wait": "Attendere prego",
-    "Preview": "Preview",
+    "Preview": "Anteprima",
     "Preview Usage Report": "Anteprima Statistiche di Utilizzo",
     "Quick guide to supported patterns": "Quick guide to supported patterns",
     "RAM Utilization": "Utilizzo RAM",
-    "Reconnect Interval (s)": "Intervallo di Riconnessione (s)",
-    "Repository ID": "ID Deposito",
-    "Repository Master": "Deposito Principale",
-    "Repository Path": "Percorso del Deposito",
     "Rescan": "Riscansiona",
     "Rescan Interval": "Intervallo di Scansione",
-    "Rescan Interval (s)": "Intervallo di Scansione dei File (s)",
     "Restart": "Riavvia",
     "Restart Needed": "Riavvio Necessario",
     "Restarting": "Riavvio",
     "Save": "Salva",
     "Scanning": "Scansione in corso",
-    "Select the nodes to share this repository with.": "Seleziona i nodi con i quali vuoi condividere questo deposito.",
+    "Select the devices to share this folder with.": "Select the devices to share this folder with.",
     "Settings": "Impostazioni",
-    "Share With Nodes": "Condividi Con i Nodi",
+    "Share With Devices": "Share With Devices",
     "Shared With": "Condiviso Con",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Breve identificatore del deposito. Deve essere lo stesso su tutti i nodi del cluster.",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Short identifier for the folder. Must be the same on all cluster devices.",
     "Show ID": "Mostra ID",
-    "Shown instead of Node ID in the cluster status.": "Visibile al posto dell'ID Nodo nello stato del cluster.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
     "Shutdown": "Arresta",
     "Simple File Versioning": "Controllo Versione Semplice",
     "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
@@ -116,37 +107,34 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing sembra inattivo, oppure c'è un problema con la tua connessione a Internet. Nuovo tentativo…",
     "The aggregated statistics are publicly available at {%url%}.": "Le statistiche aggregate sono disponibili pubblicamente su {{url}}.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configurazione è stata salvata ma non attivata. Devi riavviare Syncthing per attivare la nuova configurazione.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Quotidianamente il software invia le statistiche di utilizzo in forma criptata. Questi dati riguardano i sistemi operativi utilizzati, le dimensioni dei depositi e le versioni del software. Se i dati riportati cambiano verrà mostrata di nuovo questa finestra di dialogo.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID del nodo inserito non sembra valido. Dovrebbe essere una stringa di 52 caratteri costituita da lettere e numeri, con spazi e trattini opzionali.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID del nodo inserito non sembra valido. Dovrebbe essere una stringa di 52 o 56 caratteri costituita da lettere e numeri, con spazi e trattini opzionali.",
+    "The device ID cannot be blank.": "L'ID del dispositivo non può essere vuoto.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID del dispositivo inserito non sembra valido. Dovrebbe essere una stringa di 52 o 56 caratteri costituita da lettere e numeri, con spazi e trattini opzionali.",
+    "The folder ID cannot be blank.": "L'ID della cartella non può essere vuoto.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "L'ID della cartella dev'essere un identificatore breve (64 caratteri o meno) costituito solamente da lettere, numeri, punti (.), trattini (-) e trattini bassi (_).",
+    "The folder ID must be unique.": "L'ID della cartella dev'essere unico.",
+    "The folder path cannot be blank.": "Il percorso della cartella non può essere vuoto.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
     "The maximum age must be a number and cannot be blank.": "La durata massima dev'essere un numero e non può essere vuoto.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "La durata massima di una versione (in giorni, imposta a 0 per mantenere le versioni per sempre).",
-    "The node ID cannot be blank.": "L'ID del nodo non può essere vuoto.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Trova l'ID nella finestra di dialogo \"Modifica > Mostra ID\" dell'altro nodo, poi inseriscilo qui. Gli spazi e i trattini sono opzionali (ignorati).",
     "The number of old versions to keep, per file.": "Il numero di vecchie versioni da mantenere, per file.",
     "The number of versions must be a number and cannot be blank.": "Il numero di versioni dev'essere un numero e non può essere vuoto.",
-    "The repository ID cannot be blank.": "L'ID del deposito non può essere vuoto.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "L'ID del deposito dev'essere un identificatore breve (64 caratteri o meno) costituito solamente da lettere, numeri, punti (.), trattini (-) e trattini bassi (_).",
-    "The repository ID must be unique.": "L'ID del deposito dev'essere unico.",
-    "The repository path cannot be blank.": "Il percorso del deposito non può essere vuoto.",
     "The rescan interval must be at least 5 seconds.": "L'intervallo di scansione non può essere inferiore a 5 secondi.",
     "Unknown": "Sconosciuto",
     "Up to Date": "Sincronizzato",
     "Upgrade To {%version%}": "Aggiorna Alla {{version}}",
     "Upgrading": "Aggiornamento",
     "Upload Rate": "Velocità Upload",
-    "Usage": "Utilizzo",
     "Use Compression": "Utilizza Compressione",
     "Use HTTPS for GUI": "Utilizza HTTPS per l'interfaccia grafica",
     "Version": "Versione",
     "Versions Path": "Percorso Cartella delle Versioni",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Le versioni vengono eliminate automaticamente se superano la durata massima o il numero di file permessi in un determinato intervallo temporale.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Ora la stessa operazione deve essere eseguita anche nel nuovo nodo inserendo l'ID di questo nodo.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Quando aggiungi un nuovo deposito ricordati che gli ID vengono utilizzati per collegare i depositi nei nodi. Distinguono maiuscole e minuscole e devono corrispondere esattamente su tutti i nodi.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
     "Yes": "Sì",
     "You must keep at least one version.": "È necessario mantenere almeno una versione.",
-    "full documentation": "full documentation",
+    "full documentation": "documentazione completa",
     "items": "elementi"
 }

gui/lang/lang-lt.json

@@ -1,28 +1,30 @@
 {
     "API Key": "API raktas",
     "About": "Apie programą",
-    "Add Node": "Pridėti mazgą",
-    "Add Repository": "Pridėti saugyklą",
+    "Add Device": "Pridėti įrenginį",
+    "Add Folder": "Pridėti aplanką",
     "Address": "Adresas",
     "Addresses": "Adresai",
     "Allow Anonymous Usage Reporting?": "Siųsti anonimišką vartojimo ataskaitą?",
-    "Announce Server": "Aptikimų serveris",
     "Anonymous Usage Reporting": "Anoniminė vartojimo ataskaita",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
     "Bugs": "Klaidos",
-    "CPU Utilization": "CAP sunaudojimas",
+    "CPU Utilization": "Procesoriaus panaudojimas",
     "Close": "Uždaryti",
     "Comment, when used at the start of a line": "Komentaras naudojamas naujoje eilutėje",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Compression is recommended in most setups.": "Daugumoje atvejų spaudimas rekomenduojamas.",
     "Connection Error": "Susijungimo klaida",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "Visos teisės saugomos © 2014 Jakob Borg ir šių bendraautorių:",
     "Delete": "Trinti",
+    "Device ID": "Įrenginio ID",
+    "Device Identification": "Įrenginio identifikacija",
+    "Device Name": "Įrenginio pavadinimas",
     "Disconnected": "Atsijungęs",
     "Documentation": "Aprašymas",
     "Download Rate": "Parsisiuntimo greitis",
     "Edit": "Redaguoti",
-    "Edit Node": "Redaguoti mazgą",
-    "Edit Repository": "Redaguoti saugyklą",
+    "Edit Device": "Keisti įrenginį",
+    "Edit Folder": "Keisti aplanką",
     "Editing": "Redagavimas",
     "Enable UPnP": "Įjungti UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Įveskite dvitaškiu atskirtą \"ip:port\" adresą arba žodį \"dynamic\" norėdami gauti adresą automatiškai",
@@ -31,15 +33,17 @@
     "File Versioning": "Versijų valdymas",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Nekreipti dėmesio į failų naudojimosi leidimus.\nTaikyti  FAT sistemose.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Syncthing programa talpina senesnes versijas .stversions aplanke.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Failai apsaugoti nuo pakeitimų kituose mazguose, bet pakeitimai padaryti šiame mazge bus išsiųsti visai grupei.",
-    "Folder": "Aplankas",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Failai apsaugoti nuo pakeitimų atliktų kituose įrenginiuose, bet pakeitimai šiame įrenginyje bus nusiųsti kitiems.",
+    "Folder ID": "Aplanko ID",
+    "Folder Master": "Kelias iki aplanko",
+    "Folder Path": "Kelias iki apkanko",
     "GUI Authentication Password": "Valdymo skydelio slaptažodis",
     "GUI Authentication User": "Valdymo skydelio vartotojo vardas",
     "GUI Listen Addresses": "Valdymo skydelio adresas",
     "Generate": "Sukurti",
     "Global Discovery": "Visuotinis  matomumas",
     "Global Discovery Server": "Visuotinio matomumo serveris",
-    "Global Repository": "Visuotinė saugykla",
+    "Global State": "Visuotinė būsena",
     "Idle": "Laisvas",
     "Ignore Patterns": "Nepaisyti šablonų",
     "Ignore Permissions": "Nepaisyti failų prieigos leidimų",
@@ -50,19 +54,12 @@
     "Last seen": "Paskutinį kartą matytas",
     "Latest Release": "Paskutinė versija",
     "Local Discovery": "Vietinis matomumas",
-    "Local Discovery Port": "Vietinio matomumo jungtis",
-    "Local Repository": "Vietinė saugykla",
-    "Master Repo": "Pagrindinė saugykla",
-    "Max File Change Rate (KiB/s)": "Maksimalus failų apsikeitimo greitis (KiB/s)",
-    "Max Outstanding Requests": "Maksimalus išeinančių užklausų skaičius",
+    "Local State": "Vietinė būsena",
     "Maximum Age": "Maksimalus amžius",
     "Multi level wildcard (matches multiple directory levels)": "Keletos lygių pakaitos (atitinka keletą direktorijų lygių)",
     "Never": "Niekada",
     "No": "Ne",
     "No File Versioning": "Nėra versijų valdymo",
-    "Node ID": "Mazgo vardas",
-    "Node Identification": "Mazgo tapatybė",
-    "Node Name": "Mazgo vardas",
     "Notice": "Įspėjimas",
     "OK": "Gerai",
     "Offline": "Atsijungęs",
@@ -70,34 +67,28 @@
     "Out Of Sync": "Nesutikrinta",
     "Outgoing Rate Limit (KiB/s)": "Išeinančio srauto maksimalus greitis (KiB/s)",
     "Override Changes": "Perrašyti pakeitimus",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Kelias iki vietinės saugyklos.  Tildės ženklas (~) gali būti naudojamas nuorodai",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Kelias iki papkės kur saugomos senesnės versijos (palikite tuščią norėdami naudoti .stversions)",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Kelias iki aplanko šiame kompiuteryje. Bus sukurtas, jei neegzistuoja. Tildės simbolis (~) gali būti naudojamas kaip trumpinys",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Kelias, kur bus saugomos versijos (palikite tuščią numatytam .stversions aplankui).",
     "Please wait": "Prašome palaukti",
     "Preview": "Peržiūra",
     "Preview Usage Report": "Vartojimo statistikos peržiūra",
     "Quick guide to supported patterns": "Trumpas leistinų šablonų vadovas",
-    "RAM Utilization": "LKA panaudojimas",
-    "Reconnect Interval (s)": "Pertrauka tarp susijungimų (s)",
-    "Repository ID": "Saugyklos vardas",
-    "Repository Master": "Pagrindinė saugykla",
-    "Repository Path": "Kelias iki saugyklos",
+    "RAM Utilization": "Atminties naudojimas",
     "Rescan": "Nuskaityti iš naujo",
     "Rescan Interval": "Pertrauka tarp nuskaitymų",
-    "Rescan Interval (s)": "Pertrauka tarp nuskaitymų (s)",
     "Restart": "Perleisti",
     "Restart Needed": "Reikalingas perleidimas",
     "Restarting": "Persileidžia",
     "Save": "Išsaugoti",
     "Scanning": "Skenuojama",
-    "Select the nodes to share this repository with.": "Pasirinkite mazgus su kuriais norite dalintis šia saugykla",
+    "Select the devices to share this folder with.": "Pasirinkite įrenginius, su kuriais dalinsitės šį aplanką.",
     "Settings": "Nustatymai",
-    "Share With Nodes": "Dalinamasi su šiais mazgais",
+    "Share With Devices": "Dalintis su įrenginiais",
     "Shared With": "Dalinamasi su",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Trumpas saugyklos identifikavimas. Turi būti vienodas visuose grupės mazguose.",
-    "Show ID": "Rodyti vardą",
-    "Shown instead of Node ID in the cluster status.": "Grupės būsenoje rodomas vietoje mazgo vardo.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Grupės būsenoje rodomas vietoje mazgo vardo. Kiti mazgai matys kaip pasirinktinį vardą.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Grupės būsenoje rodomas vietoje mazgo vardo. Bus atnaujintas į mazgo vardą jei nieko neįrašysite.",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Trumpas aplanko identifikatorius. Privalo būti toks pat visuose įrenginiuose.",
+    "Show ID": "Rodyti ID",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
     "Shutdown": "Išjungti",
     "Simple File Versioning": "Supaprastintas versijų valdymas",
     "Single level wildcard (matches within a directory only)": "Vieno lygio pakaitos (atitinka tik vieną direktorijos lygį)",
@@ -116,35 +107,32 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing  išjungta arba problemos su Interneto ryšių. Bandoma iš naujo...",
     "The aggregated statistics are publicly available at {%url%}.": "Naudojimosi ataskaitą galite peržiūrėti adresu: {{url}}.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Nauji nustatymai išsaugoti, bet neaktyvuoti. Perleiskite Syncthing programą iš naujo norėdami įgalinti naujus nustatymus.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Šifruota naudojimosi ataskaita siunčiama kasdien. Šiuo metu, ataskaitoje matosi tik operacinė sistema, saugyklos dydis ir programos versija. Jeigu ateityje bus siunčiama daugiau duomenų, jums vėl bus parodyta ši pranešimas.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Įvestas neteisingas mazgo vardas. Turi būti 52 simbolių eilutė su raidėmis ir skaičiais kuriuos galima atskirti tarpu arba brūkšneliu.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Įvestas neteisingas mazgo vardas. Turi būti 52 ar 56 simbolių eilutė su raidėmis ir skaičiais kuriuos galima atskirti tarpu arba brūkšneliu.",
+    "The device ID cannot be blank.": "Įrenginio ID negali būti tuščias.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "Įrenginio ID, kurį čia reikia įvesti, gali būti rastas „Keisti > Rodyti vardą“ dialoge kitame įrenginyje. Tarpai ir brūkšneliai nebūtini (ignoruojami).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Kas dieną siunčiama šifruota naudojimo ataskaita. Ji naudojama sekti, kokios platformos naudojamos, aplankų dydžius ir programų versijas. Jei siunčiamų duomenų tipas pasikeis, šis dialogas bus parodytas iš naujo.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.",
+    "The folder ID cannot be blank.": "Aplanko ID negali būti tuščias.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
+    "The folder ID must be unique.": "Aplanko ID turi būti unikalus.",
+    "The folder path cannot be blank.": "Kelias iki aplanko negali būti tuščias.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Šie pertraukų nustatymai naudojami: pirmą valandą versijos laikomos 30 sekundžių, pirmą dieną versijos laikomos valandą, pirmas 30 dienų versijos laikomos parą, kol nebus viršytas nustatytas maksimalus amžius.",
     "The maximum age must be a number and cannot be blank.": "Maksimalus amžius  turi būti skaitmuo ir negali būti tuščias laukelis.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Maksimalus laikas kurį bus saugojama versija (dienomis, nustatykite 0 norėdami saugoti amžinai).",
-    "The node ID cannot be blank.": "Mazgo vardas negali būti tuščias.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Mazgo vardas visada galima sužinoti apsilankius \"Edit > Show ID\". Tarpai ir brūkšneliai nebūtini (ignoruojami).",
     "The number of old versions to keep, per file.": "Kiek failo versijų saugoti.",
     "The number of versions must be a number and cannot be blank.": "Versijų skaičius turi būti skaitmuo ir negali būti tuščias laukelis.",
-    "The repository ID cannot be blank.": "Saugyklos vardas negali būti tuščias.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "Saugyklos vardas negali būti ilgesnis nei 64 simboliai. Galima naudoti tik raides ir skaičius bet tašką (.), brūkšnelį (-) ir pabraukimą (_).",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Saugyklos vardas negali būti ilgesnis nei 64 simboliai. Galima naudoti tik raides ir skaičius bet tašką (.), brukšnelį (-) ir pabraukimą (_).",
-    "The repository ID must be unique.": "Saugyklos vardas turi būti unikalus.",
-    "The repository path cannot be blank.": "Kelias iki saugyklos negali būti tuščias.",
     "The rescan interval must be at least 5 seconds.": "Nuskaityti galima nedažniau nei kas 5 sekundes.",
-    "Unknown": "Velniava",
+    "Unknown": "Nežinoma",
     "Up to Date": "Atnaujinta",
     "Upgrade To {%version%}": "Atnaujinti į  {{version}}",
     "Upgrading": "Atnaujinama",
     "Upload Rate": "Išsiuntimo greitis",
-    "Usage": "Vartosena",
     "Use Compression": "Naudoti suspaudimą",
     "Use HTTPS for GUI": "Valdymo skydeliui naudoti saugų ryšį ",
     "Version": "Versija",
     "Versions Path": "Kelias iki versijos",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versijos ištrinamos jei senesnės už nustatyta maksimalų amžių arba jei viršytas maksimalus failų skaičius per nustatytą laiko tarpą.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Kai pridedate naują mazgą neužmirškite, kad kitame gale reikia sukonfigūruoti šį mazgą.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Kai įvedate naują saugyklą neužmirškite, kad ji bus naudojama visuose mazguose. Svarbu visur įvesti visiškai tokį pat saugyklos vardą neužmirštant apie didžiąsias ir mažąsias raides.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Pridėdami įrenginį, turėkite omeny, kad šis įrenginys taip pat turi būti pridėtas kitoje pusėje.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
     "Yes": "Taip",
     "You must keep at least one version.": "Būtina saugoti bent vieną versiją.",
     "full documentation": "pilna dokumentacija",

gui/lang/lang-nl.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "API-sleutel",
-    "About": "Over",
-    "Add Node": "Voeg node toe",
-    "Add Repository": "Voeg repository toe",
-    "Address": "Adres",
-    "Addresses": "Adressen",
-    "Allow Anonymous Usage Reporting?": "Bijhouden van anonieme gebruikers statistieken toestaan?",
-    "Announce Server": "Aankondigings Server",
-    "Anonymous Usage Reporting": "Bijhouden anonieme gebruikers statistieken",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Fouten",
-    "CPU Utilization": "CPU Gebruik",
-    "Close": "Sluiten",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Verbindingsfout",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg en de onderstaande bijdragers:",
-    "Delete": "Verwijderen",
-    "Disconnected": "Niet Verbonden",
-    "Documentation": "Documentatie",
-    "Download Rate": "Downloadsnelheid",
-    "Edit": "Bewerk",
-    "Edit Node": "Bewerk node",
-    "Edit Repository": "Repository Bijwerken",
-    "Editing": "Editing",
-    "Enable UPnP": "UPnP aanzetten",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Geef, gescheiden door komma's, \"ip:port\" adressen of \"dynamic\" voor het automatische vinden van de addressen.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Fout",
-    "File Versioning": "Versiebeheer",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Bestands permissiebits worden genegeerd wanneer naar veranderingen wordt gekeken. Gebruik dit op FAT bestandsystemen",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Bestanden worden naar de .stversions map verplaatst met een tijdsaanduiding, wanneer ze aangepast of verwijderd worden door syncthing.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Bestanden zijn beschermd tegen verandering gedaan op andere nodes,  maar veranderingen op deze node worden naar de rest van het cluster gestuurd",
-    "Folder": "Map",
-    "GUI Authentication Password": "GUI Authentificatie Wachtwoord",
-    "GUI Authentication User": "GUI Authentificatie Gebruikersnaam",
-    "GUI Listen Addresses": "GUI Inkomend adres",
-    "Generate": "Genereer",
-    "Global Discovery": "Globaal zoeken",
-    "Global Discovery Server": "Globale zoekserver",
-    "Global Repository": "Globale repository",
-    "Idle": "Inactief",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Rechten negeren",
-    "Incoming Rate Limit (KiB/s)": "Download snelheidslimiet (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Versies behouden",
-    "Last seen": "Laatst gezien op",
-    "Latest Release": "Laatste uitgave",
-    "Local Discovery": "Lokaal zoeken",
-    "Local Discovery Port": "Lokaal zoeken-poort",
-    "Local Repository": "Lokale repository",
-    "Master Repo": "Tegen veranderingen beschermen",
-    "Max File Change Rate (KiB/s)": "Maximale bestands uitwisselsnelheid (KiB/s)",
-    "Max Outstanding Requests": "Maximaal aantal openstaande aanvragen",
-    "Maximum Age": "Maximum leeftijd",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Nooit",
-    "No": "Nee",
-    "No File Versioning": "Geen versiebeheer",
-    "Node ID": "Node ID",
-    "Node Identification": "Node Identificatie",
-    "Node Name": "Node naam",
-    "Notice": "Notificatie",
-    "OK": "OK",
-    "Offline": "Offline",
-    "Online": "Online",
-    "Out Of Sync": "Niet gesynchroniseerd",
-    "Outgoing Rate Limit (KiB/s)": "Uitgaande snelheidslimiet (KiB/s)",
-    "Override Changes": "Veranderingen overschrijven",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pad naar de repository op de lokale computer. Word aangemaakt indien deze niet bestaat. Het tilde (~) karakter kan gebruikt worden als afkorting voor",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Pad waar de verschillende versies opgeslagen dienen te worden (laat leeg voor de standaard map '.stversion' in de repository).",
-    "Please wait": "Even geduld",
-    "Preview": "Voorbeeld",
-    "Preview Usage Report": "Bekijk gebruiksstatistieken",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "RAM gebruik",
-    "Reconnect Interval (s)": "Herverbind-interval (s)",
-    "Repository ID": "Repository ID",
-    "Repository Master": "Hoofd repository",
-    "Repository Path": "Pad van repository",
-    "Rescan": "Opnieuw scannen",
-    "Rescan Interval": "Scanfrequentie",
-    "Rescan Interval (s)": "Herscan interval (s)",
-    "Restart": "Herstart",
-    "Restart Needed": "Herstart nodig",
-    "Restarting": "Herstarten",
-    "Save": "Bewaar",
-    "Scanning": "Aan het zoeken",
-    "Select the nodes to share this repository with.": "Selecteer de nodes om deze repository mee te delen",
-    "Settings": "Instellingen",
-    "Share With Nodes": "Deel met nodes",
-    "Shared With": "Gedeeld met",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Korte naam voor de repository. Moet hetzelfde zijn op alle nodes in het cluster.",
-    "Show ID": "Toon ID",
-    "Shown instead of Node ID in the cluster status.": "Wordt weergegeven i.p.v. het node ID in de cluster status",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "De node naam wordt getoond in plaats van de node ID in het cluster status overzicht. Deze naam wordt aan andere nodes voorgesteld als een optionele, standaardnaam.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "De node naam wordt getoond in plaats van de node ID in het cluster status overzicht. Deze naam wordt geüpdatet met de naam die de node zelf adverteert indien dit veld leeg wordt gelaten.",
-    "Shutdown": "Sluit af",
-    "Simple File Versioning": "Eenvoudig versiebeheer",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Broncode",
-    "Staggered File Versioning": "Staggered File Versioning",
-    "Start Browser": "Start browser",
-    "Stopped": "Gestopt",
-    "Support / Forum": "Support / Forum",
-    "Sync Protocol Listen Addresses": "Synchronisatie protocol luister adres",
-    "Synchronization": "Synchronisatie",
-    "Syncing": "Aan het synchroniseren",
-    "Syncthing has been shut down.": "Syncthing is afgesloten",
-    "Syncthing includes the following software or portions thereof:": "De volgende software of delen daarvan zijn onderdeel van syncthing:",
-    "Syncthing is restarting.": "Syncthing is aan het herstarten.",
-    "Syncthing is upgrading.": "Syncthing is aan het upgraden.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing lijkt afgesloten te zijn, of er is een verbindingsprobleem met het internet. Nieuwe poging....",
-    "The aggregated statistics are publicly available at {%url%}.": "The verzamelde statistieken zijn publiek beschikbaar op {{url}}",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "De configuratie is opslagen maar nog niet actief. Syncthing moet opnieuw opgestart worden om de nieuwe configuratie te activeren.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "De versleutelde gebruikers statistieken worden dagelijks verstuurd. Deze worden gebruikt om veelgebruikte platformen, repo groottes en app versies bij te houden. Als er nieuwe statistieken worden bijgehouden, wordt dit venster weer getoond.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Het ingevoerde node ID lijkt niet valide te zijn. Het moet een 52 karakter lange string zijn bestaande uit letters en cijfers, spaties en streepjes zijn optioneel.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Het ingevoerde node ID lijkt niet valide te zijn. Het moet een 52 of 56 karakter lange string zijn, bestaande uit letters en cijfers, spaties en streepjes zijn optioneel.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "De volgende intervallen worden gebruikt: het eerste uur worden versies iedere 30 seconden bewaard, de eerste dag worden versies ieder uur bewaard, de eerste 30 dagen worden versies iedere dag bewaard, tot de maximale leeftijd worden versies iedere week bewaard.",
-    "The maximum age must be a number and cannot be blank.": "De maximum leeftijd moet uit cijfers bestaan en mag niet leeggelaten worden.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "De maximale tijdsduur om een versie te bewaren (in dagen, gebruik 0 om versies voor altijd te bewaren).",
-    "The node ID cannot be blank.": "Er moet een node ID ingevoerd worden",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Het node ID dat ingevoerd moet worden kan op de andere node gevonden via \"Bewerk > Toon ID\". Spaties en streepjes zijn toegestaan (worden genegeerd).",
-    "The number of old versions to keep, per file.": "Het aantal versies dat bewaard moet worden per file.",
-    "The number of versions must be a number and cannot be blank.": "Het aantal nummers moet een getal zijn en mag niet leeg blijven.",
-    "The repository ID cannot be blank.": "Er moet een repository ID ingevoerd worden.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Het repository ID moet een korte naam zijn (met 64 karakters of minder) en mag alleen bestaan uit cijfers, letters, punten (.), streepjes (-) en liggende streepjes (_). ",
-    "The repository ID must be unique.": "Het repository ID moet uniek zijn.",
-    "The repository path cannot be blank.": "Het repository ID moet ingevuld worden.",
-    "The rescan interval must be at least 5 seconds.": "De scanfrequentie moet minimaal 5 seconde zijn.",
-    "Unknown": "Onbekend",
-    "Up to Date": "Gesynchroniseerd",
-    "Upgrade To {%version%}": "Upgrade naar {{version}}",
-    "Upgrading": "Bezig met upgrade",
-    "Upload Rate": "Upload snelheid",
-    "Usage": "Gebruik",
-    "Use Compression": "Compressie gebruiken",
-    "Use HTTPS for GUI": "Gebruik HTTPS voor de GUI",
-    "Version": "Versie",
-    "Versions Path": "Bestandspad versies",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versies worden automatisch verwijderd als deze ouder zijn dan de maximale leeftijd of als ze het maximaal aantal toegestane bestanden per interval overschrijden. ",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Bedenk bij het toevoegen van een nieuwe node dat deze node ook toegevoegd moet worden aan de kant van de nieuwe node.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Bedenk bij het toevoegen van een nieuwe repository dat het repository ID de repositores met elkaar verbindt tussen de nodes. Ze zijn hoofdlettergevoelig en moeten exact dezelfde naam hebben op alle nodes.",
-    "Yes": "Ja",
-    "You must keep at least one version.": "Minstens 1 versie moet bewaard blijven.",
-    "full documentation": "full documentation",
-    "items": "objecten"
-}

gui/lang/lang-pt-PT.json

@@ -1,68 +1,65 @@
 {
     "API Key": "Chave da API",
     "About": "Acerca da aplicação",
-    "Add Node": "Adicionar nó",
-    "Add Repository": "Adicionar repositório",
+    "Add Device": "Adicionar dispositivo",
+    "Add Folder": "Adicionar pasta",
     "Address": "Endereço",
     "Addresses": "Endereços",
     "Allow Anonymous Usage Reporting?": "Permitir envio de relatórios anónimos de utilização?",
-    "Announce Server": "Servidor de anúncios",
     "Anonymous Usage Reporting": "Enviar relatórios anónimos de utilização",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Quaisquer dispositivos configurados num dispositivo apresentador serão também adicionados a este dispositivo.",
     "Bugs": "Erros",
     "CPU Utilization": "Utilização da CPU",
     "Close": "Fechar",
     "Comment, when used at the start of a line": "Comentário, quando usado no início de uma linha",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Compression is recommended in most setups.": "A compressão é recomendada na maior parte dos casos.",
     "Connection Error": "Erro de ligação",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "Direitos reservados © 2014 Jakob Borg e os seguintes contribuidores:",
     "Delete": "Eliminar",
+    "Device ID": "ID do dispositivo",
+    "Device Identification": "Identificação do dispositivo",
+    "Device Name": "Nome do dispositivo",
     "Disconnected": "Desconectado",
     "Documentation": "Documentação",
     "Download Rate": "Velocidade de recepção",
     "Edit": "Editar",
-    "Edit Node": "Editar nó",
-    "Edit Repository": "Editar repositório",
+    "Edit Device": "Editar dispositivo",
+    "Edit Folder": "Editar pasta",
     "Editing": "Editando",
     "Enable UPnP": "Activar UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduza endereços \"ip:porto\" separados por vírgulas ou \"dynamic\" para descobrir automaticamente o endereço.",
-    "Enter ignore patterns, one per line.": "Coloque os padrões a ignorar, um por linha.",
+    "Enter ignore patterns, one per line.": "Escreva os padrões de exclusão, um por linha.",
     "Error": "Erro",
     "File Versioning": "Gestão de versões",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "As permissões do ficheiro são ignoradas ao procurar alterações. Utilize nos sistemas de ficheiros FAT.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Os ficheiros são movidos para versões marcadas com o tempo numa pasta .stversions, quando substituídos ou apagados pelo syncthing.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Os ficheiros são protegidos das alterações feitas noutros nós, mas alterações feitas neste nó serão enviadas para o resto do agrupamento.",
-    "Folder": "Pasta",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Os ficheiros estão protegidos contra alterações feitas noutros dispositivos, mas alterações feitas neste dispositivo serão enviadas ao resto do grupo.",
+    "Folder ID": "ID da pasta",
+    "Folder Master": "Pasta mestre",
+    "Folder Path": "Caminho da pasta",
     "GUI Authentication Password": "Senha da autenticação na interface gráfica",
     "GUI Authentication User": "Utilizador da autenticação na interface gráfica",
     "GUI Listen Addresses": "Endereço de escuta da interface gráfica",
     "Generate": "Gerar",
     "Global Discovery": "Busca global",
     "Global Discovery Server": "Servidor da busca global",
-    "Global Repository": "Repositório global",
+    "Global State": "Estado global",
     "Idle": "Em espera",
-    "Ignore Patterns": "Ignorar padrões",
+    "Ignore Patterns": "Padrões de exclusão",
     "Ignore Permissions": "Ignorar permissões",
     "Incoming Rate Limit (KiB/s)": "Limite de velocidade de recepção (KiB/s)",
-    "Introducer": "Introducer",
+    "Introducer": "Apresentador",
     "Inversion of the given condition (i.e. do not exclude)": "Inversão de uma dada condição (ou seja, não excluir)",
     "Keep Versions": "Manter versões",
     "Last seen": "Última vez que foi verificado",
     "Latest Release": "Última versão",
     "Local Discovery": "Busca local",
-    "Local Discovery Port": "Porto da busca local",
-    "Local Repository": "Repositório local",
-    "Master Repo": "Repositório mestre",
-    "Max File Change Rate (KiB/s)": "Velocidade máxima de alterações de ficheiros (KiB/s)",
-    "Max Outstanding Requests": "Número máximo de pedidos pendentes",
+    "Local State": "Estado local",
     "Maximum Age": "Idade máxima",
-    "Multi level wildcard (matches multiple directory levels)": "Curinga multi-nível (faz corresponder a vários níveis de pastas)",
+    "Multi level wildcard (matches multiple directory levels)": "Caractere polivalente multi-nível (faz corresponder a vários níveis de pastas)",
     "Never": "Nunca",
     "No": "Não",
     "No File Versioning": "Sem gestão de versões de ficheiros",
-    "Node ID": "ID do nó",
-    "Node Identification": "Identificação do nó",
-    "Node Name": "Nome do nó",
     "Notice": "Avisos",
     "OK": "OK",
     "Offline": "Desconectado",
@@ -70,37 +67,31 @@
     "Out Of Sync": "Não sincronizado",
     "Outgoing Rate Limit (KiB/s)": "Limite da velocidade de envio (KiB/s)",
     "Override Changes": "Sobrepor alterações",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para o repositório no computador local. Será criado se não existir. O carácter (~) pode ser utilizado como atalho para",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Caminho onde as versões são guardadas (deixe vazio para usar a pasta pré-definida .stversions no repositório).",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para a pasta no computador local. Será criada, caso não exista. O caractere (~) pode ser utilizado como atalho para",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Caminho onde as versões são guardadas (deixe vazio para usar a pasta pré-definida .stversions na pasta).",
     "Please wait": "Aguarde",
     "Preview": "Previsão",
     "Preview Usage Report": "Pré-visualizar relatório de utilização",
     "Quick guide to supported patterns": "Guia rápido dos padrões suportados",
     "RAM Utilization": "Utilização da RAM",
-    "Reconnect Interval (s)": "Intervalo de reestabelecimento de ligação (s)",
-    "Repository ID": "ID do repositório",
-    "Repository Master": "Repositório mestre",
-    "Repository Path": "Caminho do repositório",
     "Rescan": "Verificar agora",
     "Rescan Interval": "Intervalo entre verificações",
-    "Rescan Interval (s)": "Intervalo entre verificações (em segundos)",
     "Restart": "Reiniciar",
     "Restart Needed": "É preciso reiniciar",
     "Restarting": "Reiniciando",
     "Save": "Gravar",
     "Scanning": "Verificando",
-    "Select the nodes to share this repository with.": "Seleccione os nós com os quais vai partilhar este repositório.",
+    "Select the devices to share this folder with.": "Seleccione os dispositivos com os quais vai partilhar esta pasta.",
     "Settings": "Configurações",
-    "Share With Nodes": "Partilhar com os nós",
+    "Share With Devices": "Partilhar com os dispositivos",
     "Shared With": "Partilhado com",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Identificador curto para o repositório. Tem que ser igual em todos os nós do agrupamento.",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Identificador curto para a pasta. Tem que ser igual em todos os dispositivos do grupo.",
     "Show ID": "Mostrar ID",
-    "Shown instead of Node ID in the cluster status.": "Apresentado ao invés do ID do nó no estado do agrupamento.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Apresentado ao invés do ID do nó na informação de estado do agrupamento. Será divulgado aos outros nós como um nome predefinido opcional.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Apresentado ao invés do ID do nó na informação de estado do agrupamento. Será actualizado para o nome que o nó divulga, se for deixado em branco.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Apresentado ao invés do ID do dispositivo no indicador de estado do grupo. Será divulgado aos outros dispositivos como um nome pré-definido opcional.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Apresentado ao invés do ID do dispositivo no indicador de estado do grupo. Será actualizado para o nome que o dispositivo divulga, se for deixado em branco.",
     "Shutdown": "Desligar",
     "Simple File Versioning": "Gestão de versões de ficheiros simples",
-    "Single level wildcard (matches within a directory only)": "Curinga de um só nível (faz corresponder apenas dentro de uma pasta)",
+    "Single level wildcard (matches within a directory only)": "Caractere polivalente de um só nível (faz corresponder apenas dentro de uma pasta)",
     "Source Code": "Código fonte",
     "Staggered File Versioning": "Gestão de versões de ficheiros escalonada",
     "Start Browser": "Iniciar navegador",
@@ -116,35 +107,32 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "O Syncthing parece estar em baixo, ou então existe um problema com a sua ligação à Internet. Tentando novamente...",
     "The aggregated statistics are publicly available at {%url%}.": "As estatísticas agrupadas estão disponíveis publicamente em {{url}}.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "A configuração foi gravada mas não activada. O Syncthing tem que reiniciar para activar a nova configuração.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "O relatório de utilização cifrado é enviado diariamente. É utilizado para seguir plataformas comuns, tamanhos de repositórios e versões da aplicação. Se o conjunto de dados do relatório for alterado, será notificado novamente através desta janela.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "O ID do nó indicado não parece ser válido. Deveria conter uma palavra de 52 caracteres constituída por letras e números, com espaços e traços opcionais. ",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "O ID do nó fornecido não parece ser válido. Deveria ser um texto com 52 ou 56 caracteres constituídos por letras e números, com espaços e traços opcionais.",
+    "The device ID cannot be blank.": "O ID do dispositivo não pode estar vazio.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "O ID do dispositivo a introduzir aqui pode ser encontrado no menu \"Editar > Mostrar ID\" do outro dispositivo. Espaços e hífenes são opcionais (ignorados).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "O relatório de utilização cifrado é enviado diariamente. É utilizado para rastrear plataformas comuns, tamanhos de pastas e versões da aplicação. Se o tipo de dados do relatório for alterado, será notificado novamente através desta janela.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "O ID do dispositivo fornecido não parece ser válido. Deveria ter 52 ou 56 caracteres constituídos por letras e números, com espaços e hífenes opcionais.",
+    "The folder ID cannot be blank.": "O ID da pasta não pode estar vazio.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "O ID da pasta tem que ser um identificador curto (64 caracteres ou menos) e ser constituído somente por letras, números e os caracteres ponto (.), hífen (-) e sublinhado (_).",
+    "The folder ID must be unique.": "O ID da pasta tem que ser único.",
+    "The folder path cannot be blank.": "O caminho da pasta não pode estar vazio.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "São utilizados os seguintes intervalos: na primeira hora é guardada uma versão a cada 30 segundos, no primeiro dia é guardada uma versão a cada hora, nos primeiros 30 dias é guardada uma versão por dia e, até que atinja a idade máxima, é guardada uma versão por semana.",
     "The maximum age must be a number and cannot be blank.": "A idade máxima tem que ser um número e não pode estar vazia.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Tempo máximo para manter uma versão (em dias, use 0 para manter a versão para sempre).",
-    "The node ID cannot be blank.": "O ID do nó não pode estar vazio.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "O ID do nó a introduzir pode ser encontrado no diálogo \"Editar > Mostrar ID\" no outro nó. Espaços e traços são opcionais (ignorados).",
     "The number of old versions to keep, per file.": "O número de versões antigas a manter, por ficheiro.",
     "The number of versions must be a number and cannot be blank.": "O número de versões tem que ser um número e não pode estar vazio.",
-    "The repository ID cannot be blank.": "O ID do repositório não pode estar vazio.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "O ID do repositório tem que ser um identificador curto (64 caracteres ou menos) e ser constituído somente por letras, números e os caracteres ponto (.), traço (-) e sublinhado (_).",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "O ID do repositório tem que ser um identificador curto (64 caracteres ou menos) e consiste em letras, números e os caracteres ponto (.), traço (-) e (_).",
-    "The repository ID must be unique.": "O ID do repositório tem que ser único.",
-    "The repository path cannot be blank.": "O caminho do repositório não pode estar vazio.",
     "The rescan interval must be at least 5 seconds.": "O intervalo entre verificações tem que ser pelo menos de 5 segundos.",
     "Unknown": "Desconhecido",
     "Up to Date": "Actualizado",
     "Upgrade To {%version%}": "Actualizar para {{version}}",
     "Upgrading": "Actualizando",
     "Upload Rate": "Velocidade de envio",
-    "Usage": "Utilização",
     "Use Compression": "Usar compressão",
     "Use HTTPS for GUI": "Utilizar HTTPS na interface gráfica",
     "Version": "Versão",
     "Versions Path": "Caminho das versões",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "As versões são eliminadas automaticamente se forem mais antigas do que a idade máxima ou excederem o número máximo de ficheiros permitido num intervalo.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Quando adicionar um novo nó, lembre-se que este nó tem que ser adicionado no outro lado também.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Quando adicionar um novo repositório, lembre-se que o ID do repositório é utilizado para juntar os repositórios entre nós. Os ID's são sensíveis às maiúsculas e minúsculas e têm que corresponder exactamente entre todos os nós.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Quando adicionar um novo dispositivo, lembre-se que este dispositivo tem que ser adicionado do outro lado também.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando adicionar uma nova pasta, lembre-se que o ID da pasta é utilizado para ligar as pastas entre dispositivos. É sensível às diferenças entre maiúsculas e minúsculas e tem que ter uma correspondência perfeita entre todos os dispositivos.",
     "Yes": "Sim",
     "You must keep at least one version.": "Tem que manter pelo menos uma versão.",
     "full documentation": "documentação completa",

gui/lang/lang-ru.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "Ключ API",
-    "About": "О программе",
-    "Add Node": "Добавить Узел",
-    "Add Repository": "Добавить репозиторий",
-    "Address": "Адрес",
-    "Addresses": "Адреса",
-    "Allow Anonymous Usage Reporting?": "Разрешить сбор анонимной статистики использования?",
-    "Announce Server": "Сервер публикации",
-    "Anonymous Usage Reporting": "Анонимная статистика использования",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Ошибки",
-    "CPU Utilization": "Загрузка ЦПУ",
-    "Close": "Закрыть",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Ошибка подключения",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Все права защищены © 2014 Jakob Borg и следующие участники:",
-    "Delete": "Удалить",
-    "Disconnected": "Нет соединения",
-    "Documentation": "Документация",
-    "Download Rate": "Скорость загрузки",
-    "Edit": "Изменить",
-    "Edit Node": "Изменить Узел",
-    "Edit Repository": "Изменить Репозиторий",
-    "Editing": "Editing",
-    "Enable UPnP": "Включить UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": " Введите пары \"IP:PORT\" разделённые запятыми, или слово \"dynamic\" для автоматического обнаружения адреса.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Ошибка",
-    "File Versioning": "Управление версиями",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Права доступа к файлам будут игнорироваться. Используйте на файловых системах типа FAT.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Версии файлов с временнОй меткой перемещаются в директорию .stversions, если они удалены или перемещены в процессе синхронизации.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Файлы защищены от изменений сторонними узлами, но изменения внесённые текущим узлом будут синхронизированы со всем кластером.",
-    "Folder": "Папка",
-    "GUI Authentication Password": "Пароль для доступа к панели управления",
-    "GUI Authentication User": "Имя пользователя для доступа к панели управления",
-    "GUI Listen Addresses": "Адрес панели управления",
-    "Generate": "Сгенерировать",
-    "Global Discovery": "Глобальное обнаружение",
-    "Global Discovery Server": "Сервер глобального обнаружения",
-    "Global Repository": "Глобальный репозиторий",
-    "Idle": "Бездействует",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Игнорировать файловые права доступа",
-    "Incoming Rate Limit (KiB/s)": "Ограничение входящего потока (Кбит/сек)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Количество хранимых версий",
-    "Last seen": "Был доступен",
-    "Latest Release": "Последняя версия",
-    "Local Discovery": "Локальное обнаружение",
-    "Local Discovery Port": "Порт локального обнаружения",
-    "Local Repository": "Локальный репозиторий",
-    "Master Repo": "Главный репозиторий",
-    "Max File Change Rate (KiB/s)": "Максимальная скорость изменения файлов (KiB/s)",
-    "Max Outstanding Requests": "Максимальное количество исходящих запросов",
-    "Maximum Age": "Максимальный срок",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Никогда",
-    "No": "Нет",
-    "No File Versioning": "Без управления версиями файлов",
-    "Node ID": "ID Узла",
-    "Node Identification": "Идентификация узла",
-    "Node Name": "Имя Узла",
-    "Notice": "Внимание",
-    "OK": "ОК",
-    "Offline": "Оффлайн",
-    "Online": "Онлайн",
-    "Out Of Sync": "Не синхронизировано",
-    "Outgoing Rate Limit (KiB/s)": "Предел скорости отдачи (KiB/s)",
-    "Override Changes": "Перезаписать изменения",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Путь к репозиторию на локальном компьютере. Если не существует, то будет создан. Знак тильды (~) может использоваться как ссылка",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Путь, куда нужно сохранять версии (оставьте пустым для папки .stversions в репозитории).",
-    "Please wait": "Пожалуйста, подождите",
-    "Preview": "Предварительный просмотр",
-    "Preview Usage Report": "Посмотреть отчёт об использовании",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "Использование ОЗУ",
-    "Reconnect Interval (s)": "Интервал переподключений (секунды)",
-    "Repository ID": "ID Репозитория",
-    "Repository Master": "Главный Репозиторий",
-    "Repository Path": "Путь к Репозиторию",
-    "Rescan": "Пересканирование",
-    "Rescan Interval": "Интервал пересканирования",
-    "Rescan Interval (s)": "Интервал между сканированием (сек)",
-    "Restart": "Перезапуск",
-    "Restart Needed": "Требуется перезапуск",
-    "Restarting": "Перезапуск",
-    "Save": "Сохранить",
-    "Scanning": "Сканирование",
-    "Select the nodes to share this repository with.": "Выберите узлы для которых будет доступен данный репозиторий.",
-    "Settings": "Настройки",
-    "Share With Nodes": "Предоставить доступ узлам",
-    "Shared With": "Доступ предоставлен",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Короткий идентификатор репозитория. Должен быть одинаковый на всех узлах кластера.",
-    "Show ID": "Показать ID",
-    "Shown instead of Node ID in the cluster status.": "Отображается вместо ID узла в статусе кластера.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Показано вместо идентификатора узла в статусе кластера. Будет разглашено другим узлам в качестве дополнительного имени по умолчанию.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Показано вместо идентификатора узла в статусе кластера. Будет обновлено именем, разглашённым узлом, если оставлено пустым.",
-    "Shutdown": "Выключить",
-    "Simple File Versioning": "Простое управление версиями файлов",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Исходный код",
-    "Staggered File Versioning": "Ступенчатое управление версиями файлов",
-    "Start Browser": "Открыть браузер",
-    "Stopped": "Остановлено",
-    "Support / Forum": "Поддержка / Форум",
-    "Sync Protocol Listen Addresses": "Адрес протокола синхронизации",
-    "Synchronization": "Синхронизация",
-    "Syncing": "Синхронизация",
-    "Syncthing has been shut down.": "Syncthing выключен.",
-    "Syncthing includes the following software or portions thereof:": "Syncthing включает в себя следующее ПО или его части:",
-    "Syncthing is restarting.": "Перезапуск Syncthing",
-    "Syncthing is upgrading.": "Обновление Syncthing ",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Кажется, Syncthing не запущен или есть проблемы с подключением к Интернету. Переподключаюсь...",
-    "The aggregated statistics are publicly available at {%url%}.": "Суммарная статистика общедоступна на {{url}}.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Конфигурация была сохранена но не активирована. Для активации новой конфигурации необходимо рестартовать Syncthing.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Зашифрованные отчёты об использовании отправляются ежедневно. Они используются для отслеживания проблем, размеров репозиториев и версий Syncthing. Если набор данных в отчёте будет изменён, то вы получите уведомление об этом в этом диалоге.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введённый ID узла выглядит неправильно: ID должен быть строкой, длинной 52 символа, обязательно содержащей группы букв и цифр которые могут быть разделены пробелами или тире.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введённый ID узла выглядит неправильно: ID должен быть строкой, длинной 52 или 56 символов, обязательно содержащей группы букв и цифр которые могут быть разделены пробелами или тире.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Используются следующие интервалы: в первый час версия меняется каждые 30 секунд, в первый день - каждый час, первые 30 дней - каждый день, после, до максимального срока - каждую неделю.",
-    "The maximum age must be a number and cannot be blank.": "Максимальный срок должен быть числом и не может быть пустым.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Максимальный срок хранения версии (в днях, 0 значит вечное хранение).",
-    "The node ID cannot be blank.": "ID узла не может быть пустым.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "ID узла можно узнать в окне \"Редактировать > Показать ID\" на требуемом узле. Пробелы и тире используются для удобства и не обязательны (игнорируются).",
-    "The number of old versions to keep, per file.": "Количество хранимых версий файла.",
-    "The number of versions must be a number and cannot be blank.": "Количество версий должно быть числом и не может быть пустым.",
-    "The repository ID cannot be blank.": "ID Репозитория не может быть пустым.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "ID репозитория должен быть коротким id (64 символа или меньше) состоящий только из букв, цифр,  точек (.), тире (-) и нижнего подчёркивания (_).",
-    "The repository ID must be unique.": "ID Репозитория должен быть уникальным.",
-    "The repository path cannot be blank.": "Путь к репозиторию не может быть пустым.",
-    "The rescan interval must be at least 5 seconds.": "Интервал пересканирования должен быть хотя бы 5 секунд.",
-    "Unknown": "Неизвестно",
-    "Up to Date": "Обновлено",
-    "Upgrade To {%version%}": "Обновить до {{version}}",
-    "Upgrading": "Обновление",
-    "Upload Rate": "Скорость отдачи",
-    "Usage": "Справка",
-    "Use Compression": "Использовать сжатие",
-    "Use HTTPS for GUI": "Использовать HTTPS для панели управления",
-    "Version": "Версия",
-    "Versions Path": "Путь к версиям",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версии удаляются автоматически, если они существуют дольше максимального срока или превышают разрешённое количество файлов за интервал.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Добавляя новый узел помните, что новый узел должен быть добавлен и на другой стороне.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Добавляя новый репозиторий помните, что ID репозитория используется для связи всех репозиториев между узлами. ID чувствительны к регистру и должны совпадать на всех узлах.",
-    "Yes": "Да",
-    "You must keep at least one version.": "Вы должны хранить как минимум одну версию.",
-    "full documentation": "full documentation",
-    "items": "элементы"
-}

gui/lang/lang-sv.json

@@ -1,68 +1,65 @@
 {
     "API Key": "API-nyckel",
     "About": "Om",
-    "Add Node": "Lägg till nod",
-    "Add Repository": "Lägg till lagring",
+    "Add Device": "Lägg till enhet",
+    "Add Folder": "Lägg till katalog",
     "Address": "Adress",
     "Addresses": "Adresser",
     "Allow Anonymous Usage Reporting?": "Tillåt anonym användarstatistik?",
-    "Announce Server": "Uppslagningsserver",
     "Anonymous Usage Reporting": "Anonym användarstatistik",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
     "Bugs": "Buggar",
     "CPU Utilization": "CPU-användning",
     "Close": "Stäng",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Comment, when used at the start of a line": "Kommentar, vid början av en rad.",
+    "Compression is recommended in most setups.": "Komprimering är rekommenderat för de flesta.",
     "Connection Error": "Anslutningsproblem",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg och de följande medarbetarna:",
     "Delete": "Radera",
+    "Device ID": "Enhets-ID",
+    "Device Identification": "Enhetsidentifikation",
+    "Device Name": "Enhetsnamn",
     "Disconnected": "Ej ansluten",
     "Documentation": "Dokumentation",
     "Download Rate": "Nedladdningshastighet",
     "Edit": "Redigera",
-    "Edit Node": "Redigera nod",
-    "Edit Repository": "Redigera lagring",
-    "Editing": "Editing",
+    "Edit Device": "Redigera enhet",
+    "Edit Folder": "Redigera katalog",
+    "Editing": "Redigerar",
     "Enable UPnP": "Använd UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Ange kommaseparerade \"ip:port\"-adresser eller ordet \"dynamic\" för att använda automatisk uppslagning.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
+    "Enter ignore patterns, one per line.": "Ange filmönster, ett per rad.",
     "Error": "Fel",
     "File Versioning": "Versionshantering",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Filers rättighetsbitar tas inte hänsyn till vid synkronisering. Använd på FAT-filsystem.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Filer flyttas till datumstämplade versioner i en .stversions-katalog när de blir uppdaterade eller raderade av syncthing.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Filer skyddas från ändringar gjorda på andra noder, men ändringar som görs på den här noden skickas till de andra klustermedlemmarna.",
-    "Folder": "Katalog",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Filer skyddas från ändringar gjorda på andra enheter, men ändringar som görs på den här noden skickas till de andra klustermedlemmarna.",
+    "Folder ID": "Katalog-ID",
+    "Folder Master": "Huvudlagring",
+    "Folder Path": "Sökväg",
     "GUI Authentication Password": "GUI-lösenord",
     "GUI Authentication User": "GUI-användare",
     "GUI Listen Addresses": "GUI-adress",
     "Generate": "Skapa",
     "Global Discovery": "Global uppslagning",
     "Global Discovery Server": "Global uppslagningsserver",
-    "Global Repository": "Global lagring",
+    "Global State": "Global status",
     "Idle": "Vilande",
-    "Ignore Patterns": "Ignore Patterns",
+    "Ignore Patterns": "Filmönster",
     "Ignore Permissions": "Ignorera filrättigheter",
     "Incoming Rate Limit (KiB/s)": "Max nedladdningshastighet (KiB/s)",
     "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
+    "Inversion of the given condition (i.e. do not exclude)": "Vänder på villkoret, d.v.s. exkluderar inte.",
     "Keep Versions": "Behåll versioner",
     "Last seen": "Senast online",
     "Latest Release": "Senaste version",
     "Local Discovery": "Lokal uppslagning",
-    "Local Discovery Port": "Lokal uppslagningsport",
-    "Local Repository": "Lokal lagring",
-    "Master Repo": "Huvudlagring",
-    "Max File Change Rate (KiB/s)": "Högsta ändringshastighet (KiB/s)",
-    "Max Outstanding Requests": "Paralellitet",
+    "Local State": "Lokal status",
     "Maximum Age": "Högsta åldersgräns",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
+    "Multi level wildcard (matches multiple directory levels)": "Jokertecken som representerar noll eller fler godtyckliga tecken, även över kataloggränser.",
     "Never": "Aldrig",
     "No": "Nej",
     "No File Versioning": "Ingen versionshantering",
-    "Node ID": "Nod-ID",
-    "Node Identification": "Nod-identifiering",
-    "Node Name": "Nodnamn",
     "Notice": "OBS",
     "OK": "OK",
     "Offline": "Ej tillgänglig",
@@ -70,37 +67,31 @@
     "Out Of Sync": "Ur synk",
     "Outgoing Rate Limit (KiB/s)": "Max uppladdningshastighet (KiB/s)",
     "Override Changes": "Skriv över ändringar",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sökväg till katalogen på din dator. Kommer att skapas om det inte finns. Tecknet tilde (~) kan användas som en genväg för",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Katalog där versioner sparas (lämna blankt för att använda .stversions i lagringskatalogen).",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sökväg till katalogen på din dator. Kommer att skapas om det inte finns. Tecknet tilde (~) kan användas som en genväg för",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Sökväg där versioner sparas (lämna blankt för att använda .stversions i den ordinarie katalogen).",
     "Please wait": "Var god vänta",
-    "Preview": "Preview",
+    "Preview": "Förhandsgranska",
     "Preview Usage Report": "Förhandsgranska statistik",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
+    "Quick guide to supported patterns": "Snabb guide till filmönster som stöds",
     "RAM Utilization": "Minnesanvändning",
-    "Reconnect Interval (s)": "Anslutningsintervall (s)",
-    "Repository ID": "Lagrings-ID",
-    "Repository Master": "Huvudlagring",
-    "Repository Path": "Lagringskatalog",
     "Rescan": "Uppdatera",
     "Rescan Interval": "Uppdateringsintervall",
-    "Rescan Interval (s)": "Uppdateringsintervall (s)",
     "Restart": "Starta om",
     "Restart Needed": "Omstart behövs",
     "Restarting": "Startar om",
     "Save": "Spara",
     "Scanning": "Uppdaterar",
-    "Select the nodes to share this repository with.": "Välj vilka noder förvaringen ska delas med.",
+    "Select the devices to share this folder with.": "Ange enheterna att dela den här katalogen med.",
     "Settings": "Inställningar",
-    "Share With Nodes": "Dela med noder",
+    "Share With Devices": "Dela med enheter",
     "Shared With": "Delat med",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Kort identifieringssträng för förvaringen. Måste vara samma på alla noder i klustern.",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Kort identifieringssträng för katalogen. Måste vara samma på alla enheter i klustern.",
     "Show ID": "Visa ID",
-    "Shown instead of Node ID in the cluster status.": "Visas i stället för nod-ID",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Visas istället för nod-ID. Skickas till andra noder som namn på denna nod.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Visas istället för nod-ID. Sätts till namnet på den andra noden vid första anslutning om det lämnas blankt.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Visas i stället för enhets-ID. Skickas till andra enheter som namn på denna enhet.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Visas i stället för enhets-ID. Sätts till namnet på den andra enheten vid första anslutning om det lämnas blankt.",
     "Shutdown": "Stäng av",
     "Simple File Versioning": "Enkel versionshantering",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
+    "Single level wildcard (matches within a directory only)": "Jokertecken som representerar noll eller fler godtyckliga tecken i ett filnamn.",
     "Source Code": "Källkod",
     "Staggered File Versioning": "Versionshantering i intervall",
     "Start Browser": "Starta browser",
@@ -116,37 +107,34 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing verkar avstängd, eller så är där ett problem med din Internetanslutning. Försöker igen...",
     "The aggregated statistics are publicly available at {%url%}.": "Aggregerad statistik finns publikt tillgänglig på {{url}}.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Konfigurationen har sparats men inte aktiverats. Syncthing måste startas om för att aktivera den nya konfigurationen.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Den krypterade användarstatistiken skickas dagligen. Den används för att spåra vanliga plattformar, lagringsstorlekar och versioner. Om datan som rapporteras ändras så kommer du att bli tillfrågad igen.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det inmatade nod-ID:t verkar inte korrekt. Det ska vara en 52 teckens sträng bestående av siffror och bokstäver, eventuellt med mellanrum och bindestreck.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det inmatade nod-ID:t verkar inte korrekt. Det ska vara en 52 eller 56 teckens sträng bestående av siffror och bokstäver, eventuellt med mellanrum och bindestreck.",
+    "The device ID cannot be blank.": "Enhets-ID kan inte vara blankt.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "Enhets-ID som behövs här kan du hitta i \"Redigera > Visa ID\"-dialogen på den andra enheten. Mellanrum och bindestreck är valfria (ignoreras).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Den krypterade användarstatistiken skickas dagligen. Den används för att spåra vanliga plattformar, katalogstorlekar och versioner. Om datan som rapporteras ändras så kommer du att bli tillfrågad igen.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det inmatade enhets-ID:t verkar inte korrekt. Det ska vara en 52 eller 56 teckens sträng bestående av siffror och bokstäver, eventuellt med mellanrum och bindestreck.",
+    "The folder ID cannot be blank.": "Ange ett enhets-ID.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "Katalog-ID:t måste vara en kort sträng (64 tecken eller mindre), bestående av endast bokstäver, siffror, punkt (.), bindestreck (-) och understreck (_).",
+    "The folder ID must be unique.": "Enhets-ID måste vara unikt.",
+    "The folder path cannot be blank.": "Ange en sökväg.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "De följande intervallen används: varje 30 sekunder under den första timmen; varje timme under den första dagen; varje dag för de första 30 dagarna; varje vecka tills den maximala åldersgränsen uppnås.",
     "The maximum age must be a number and cannot be blank.": "Åldersgränsen måste vara ett tal och kan inte lämnas blankt.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Den längsta tid att behålla en version (i dagar, sätt till 0 för att behålla versioner för evigt).",
-    "The node ID cannot be blank.": "Nod-ID:t kan inte vara blankt.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Nod-ID:t som behövs här kan du hitta i \"Redigera > Visa ID\"-dialogen på den andra noden. Mellanrum och bindestreck är valfria (ignoreras).",
     "The number of old versions to keep, per file.": "Antalet gamla versioner som ska behållas, per fil.",
     "The number of versions must be a number and cannot be blank.": "Antalet versioner måste vara ett nummer och kan inte lämnas blankt.",
-    "The repository ID cannot be blank.": "Lagrings-ID kan inte vara blankt.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Lagrings-ID måste vara en kort identifierar (64 tecken eller mindre), bestående av endast bokstäver, siffror, punkt (.), bindestreck (-) och understräck (_).",
-    "The repository ID must be unique.": "Lagrings-ID måste vara unikt.",
-    "The repository path cannot be blank.": "Lagrings-ID kan inte lämnas blankt.",
     "The rescan interval must be at least 5 seconds.": "Uppdateringsintervallet måste vara minst 5 sekunder.",
     "Unknown": "Okänt",
     "Up to Date": "Helt uppdaterad",
     "Upgrade To {%version%}": "Uppgradera till {{version}}",
     "Upgrading": "Uppgraderar",
     "Upload Rate": "Uppladdningshastighet",
-    "Usage": "Användande",
     "Use Compression": "Använd komprimering",
     "Use HTTPS for GUI": "Använd HTTPS för GUI",
     "Version": "Version",
     "Versions Path": "Katalog för versioner",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versioner tas bort automatiskt när de är äldre än den maximala åldersgränsen eller överstiger frekvensen i sitt interval.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "När du lägger till en ny nod, kom ihåg att den här noden måste läggas till på den andra noden också.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "När du lägger till ny lagring, tänk på att lagrings-ID knyter ihop lagringen mellan olika noder. De måste vara exakt desamma mellan noder, och stora eller små bokstäver har betydelse.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "När du lägger till en ny enhet, kom ihåg att den här enheten måste läggas till på den andra enheten också.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "När du lägger till ny katalog, tänk på att katalog-ID:t knyter ihop katalogen mellan olika noder. De måste vara exakt desamma mellan noder och stora eller små bokstäver har betydelse.",
     "Yes": "Ja",
     "You must keep at least one version.": "Du måste behålla åtminstone en version.",
-    "full documentation": "full documentation",
+    "full documentation": "fullständig dokumentation",
     "items": "poster"
 }

gui/lang/lang-tr.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "API Anahtarı",
-    "About": "Hakkında",
-    "Add Node": "Düğüm ekle",
-    "Add Repository": "Depo ekle",
-    "Address": "Adres",
-    "Addresses": "Adresler",
-    "Allow Anonymous Usage Reporting?": "Anonim kullanım raporlarına izin ver ?",
-    "Announce Server": "Duyuru Sunucusu",
-    "Anonymous Usage Reporting": "Anonim Kullanım Raporlama",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Hatalar",
-    "CPU Utilization": "İşlemci Kullanımı",
-    "Close": "Kapat",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Bağlantı hatası",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Telif hakkı © 2014 Jakob Borg ve aşağıdaki katkıda bulunanlar",
-    "Delete": "Sil",
-    "Disconnected": "Bağlantı Kesik",
-    "Documentation": "Dokümantasyon",
-    "Download Rate": "İndirme Hızı",
-    "Edit": "Seçenekler",
-    "Edit Node": "Düğümü Düzenle",
-    "Edit Repository": "Depoyu düzenle",
-    "Editing": "Editing",
-    "Enable UPnP": "UPnP Etkinleştir",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "IP adresleri eklemek için virgül ile ayırarak \"ip:port\" yazın, ya da \"dynamic\" yazarak otomatik bulma işlemini seçin.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Hata",
-    "File Versioning": "Dosya Sürümlendirme",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Değişim yoklarken dosya izin bilgilerini ihmal et. FAT dosya sisteminde kullanın.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Dosyalar syncthing tarafından değiştirildiğinde ya da silindiğinde, tarih damgalı sürümleri .stversions dizinine taşınır.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Dosyalar diğer düğümlerde yapılan değişikliklerden korunur, ancak bu düğümdeki değişiklikler kümedeki diğer düğümlere gönderilir.",
-    "Folder": "Dizin",
-    "GUI Authentication Password": "Kullanıcı arayüzü şifresi",
-    "GUI Authentication User": "Kullanıcı arayüzü kullanıcı ismi",
-    "GUI Listen Addresses": "Kullanıcı arayüzü bağlantı adresi",
-    "Generate": "Oluştur",
-    "Global Discovery": "Küresel Keşif",
-    "Global Discovery Server": "Küresel Keşif Sunucusu",
-    "Global Repository": "Global Depo",
-    "Idle": "Boşta",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "İzinleri yoksay",
-    "Incoming Rate Limit (KiB/s)": "Incoming Rate Limit (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Sürüm tut",
-    "Last seen": "Last seen",
-    "Latest Release": "Son sürüm",
-    "Local Discovery": "Yerel bulma",
-    "Local Discovery Port": "Yerel bulma portları",
-    "Local Repository": "Yerel Depo",
-    "Master Repo": "Ana depo",
-    "Max File Change Rate (KiB/s)": "Mak. Dosya değiştirme oranı (KB/sn)",
-    "Max Outstanding Requests": "Maks Öncellikli İstekler",
-    "Maximum Age": "Maximum Age",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Never",
-    "No": "Hayır",
-    "No File Versioning": "No File Versioning",
-    "Node ID": "Düğüm ID",
-    "Node Identification": "Düğüm Kimliği",
-    "Node Name": "Düğüm İsmi",
-    "Notice": "Uyarı",
-    "OK": "Tamam",
-    "Offline": "Çevrim dışı",
-    "Online": "Çevrim içi",
-    "Out Of Sync": "Senkronize edilmemiş",
-    "Outgoing Rate Limit (KiB/s)": "Yükleme hız sınırı (KB/sn)",
-    "Override Changes": "Değişiklikleri Geçersiz kıl",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Yerel bilgisayardaki depoya ulaşım yolu. Dizin yoksa yaratılacak. (~) karakterinin kısayol olarak kullanılabileceği yol",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Path where versions should be stored (leave empty for the default .stversions folder in the repository).",
-    "Please wait": "Lütfen Bekleyin",
-    "Preview": "Preview",
-    "Preview Usage Report": "Kullanım raporunu gözden geçir",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "RAM Kullanımı",
-    "Reconnect Interval (s)": "Yeniden bağlanma süresi (sn)",
-    "Repository ID": "Depo ID",
-    "Repository Master": "Ana depo",
-    "Repository Path": "Depo Yolu",
-    "Rescan": "Tekrar Tara",
-    "Rescan Interval": "Rescan Interval",
-    "Rescan Interval (s)": "Tekrar tarama süresi (sn)",
-    "Restart": "Yeniden Başlat",
-    "Restart Needed": "Yeniden başlatma gereklidir",
-    "Restarting": "Yeniden başlatılıyor",
-    "Save": "Kaydet",
-    "Scanning": "Taranıyor",
-    "Select the nodes to share this repository with.": "Bu deponun paylaşılacağı düğümleri seçin.",
-    "Settings": "Ayarlar",
-    "Share With Nodes": "Paylaşılan düğümler:",
-    "Shared With": "Paylaşılan düğümler",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Depo için kısa tanımlayıcı. Kümedeki tüm düğümlerde aynı olmalı.",
-    "Show ID": "ID Göster",
-    "Shown instead of Node ID in the cluster status.": "Ana ekranda Düğüm ID yerine bunu göster.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Küme durumunda Düğüm ID yerine bunu göster.  Varsayılan isim isteğe bağlı olarak diğer düğümlere ilan edilecektir.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Küme durumunda Düğüm ID yerine bunu göster.  Eğer düğüm ismi boş bırakılırsa düğüm ismi güncellenip ilan edilecektir.",
-    "Shutdown": "Kapat",
-    "Simple File Versioning": "Simple File Versioning",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Kaynak Kodu",
-    "Staggered File Versioning": "Staggered File Versioning",
-    "Start Browser": "Tarayıcıyı Başlat",
-    "Stopped": "Durduruldu",
-    "Support / Forum": "Destek / Forum",
-    "Sync Protocol Listen Addresses": "Sync Protokol Dinleme Adresleri",
-    "Synchronization": "Senkronizasyon",
-    "Syncing": "Senkronize ediliyor",
-    "Syncthing has been shut down.": "Syncthing durduruldu",
-    "Syncthing includes the following software or portions thereof:": "Syncthing aşağıdaki yazılımları veya bunların bölümlerini içermektedir:",
-    "Syncthing is restarting.": "Syncthing yeniden başlatılıyor.",
-    "Syncthing is upgrading.": "Syncthing yükseltiliyor.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing görünüşe durdu veya internetin bağlantınızda problem var. Tekrar deniyor....",
-    "The aggregated statistics are publicly available at {%url%}.": "Toplanan halka açık istatistiklere ulaşabileceğiniz adres {{url}}.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Ayarlar kaydedildi ancak aktifleştirilmedi. Aktifleştirmek için Syncthing yeniden başlatılmalı.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Şifrelenmiş kullanım bilgisi günlük olarak gönderilir. Platform, depo büyüklüğü ve uygulama sürümü hakkında bilgi toplanır. Toplanan bilgi çeşidi değişecek olursa, sizden tekrar onay istenecek.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Girilen düğüm ID'si geçerli gibi gözükmüyor. 52 karakter uzunluğunda, harf ve rakamlardan oluşmalı. Boşlukların ve kısa çizgilerin olup olmaması önemli değildir.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Girilen düğüm ID'si geçerli gibi gözükmüyor. 52 ya da 56 karakter uzunluğunda, harf ve rakamlardan oluşmalı. Boşlukların ve kısa çizgilerin olup olmaması önemli değildir.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
-    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
-    "The node ID cannot be blank.": "Düğüm ID'si boş olamaz.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "Buraya girilecek düğüm ID'si diğer düğümde \"Düzenle > ID Göster\" menüsünden bulunabilir. Boşluk ve kısa çizginin olup olmaması önemli değildir. (İhmal edilir)",
-    "The number of old versions to keep, per file.": "Dosya başına saklanacak eski sürüm.",
-    "The number of versions must be a number and cannot be blank.": "Sürümlerin sayısı sayı olmalı ve boş bırakılamaz.",
-    "The repository ID cannot be blank.": "Depo ID boş bırakılamaz.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "Depo ID uzun olmamalı (64 karakter ya da daha az). Sadece harf, rakam, nokta (.), kısa çizgi (-) ve alt çizgi (_) kullanabilirsiniz.",
-    "The repository ID must be unique.": "Depo ID'si benzersiz olmalıdır.",
-    "The repository path cannot be blank.": "Depo yolu boş bırakılamaz.",
-    "The rescan interval must be at least 5 seconds.": "The rescan interval must be at least 5 seconds.",
-    "Unknown": "Bilinmiyor",
-    "Up to Date": "Güncel",
-    "Upgrade To {%version%}": "{{version}} sürümüne yükselt",
-    "Upgrading": "Yükseltiliyor",
-    "Upload Rate": "Yükleme hızı",
-    "Usage": "Kullanım",
-    "Use Compression": "Sıkıştırma kullan",
-    "Use HTTPS for GUI": "GUI için HTTPS kullan",
-    "Version": "Sürüm",
-    "Versions Path": "Versions Path",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Yeni bir düğüm eklendiğinde unutmayın ki; bu düğüm diğer tarafa da eklenmelidir.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Unutmayın ki; Depo ID, depoları düğümler arasında bağlamak için kullanılıyor. Büyük - küçük harf duyarlı, ve bütün düğümlerde aynı olmalı.",
-    "Yes": "Evet",
-    "You must keep at least one version.": "En az bir sürümü tutmalısınız.",
-    "full documentation": "full documentation",
-    "items": "öğeler"
-}

gui/lang/lang-uk.json

@@ -1,152 +0,0 @@
-{
-    "API Key": "API ключ",
-    "About": "Про програму",
-    "Add Node": "Додати вузол",
-    "Add Repository": "Додати репозиторій",
-    "Address": "Адреса",
-    "Addresses": "Адреси",
-    "Allow Anonymous Usage Reporting?": "Дозволити програмі збирати анонімну статистику викроистання?",
-    "Announce Server": "Сервер анонсування",
-    "Anonymous Usage Reporting": "Анонімна статистика використання",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
-    "Bugs": "Помилки",
-    "CPU Utilization": "Навантаження CPU",
-    "Close": "Закрити",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
-    "Connection Error": "Помилка з’єднання",
-    "Copyright © 2014 Jakob Borg and the following Contributors:": "Copyright © 2014 Jakob Borg та наступні контриб’ютори:",
-    "Delete": "Видалити",
-    "Disconnected": "З’єднання відсутнє",
-    "Documentation": "Документація",
-    "Download Rate": "Швидкість завантаження",
-    "Edit": "Редагувати",
-    "Edit Node": "Редагувати вузол",
-    "Edit Repository": "Редагувати репозиторій",
-    "Editing": "Editing",
-    "Enable UPnP": "Увімкнути UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Уведіть адреси \"ip:port\" розділені комою, або слово \"dynamic\" для здійснення автоматичного виявлення адреси.",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
-    "Error": "Помилка",
-    "File Versioning": "Керування версіями",
-    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "Біти прав доступу до файлів будуть проігноровані під час визначення змін. Використовуйте на файлових системах FAT.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "Файли будуть поміщатися у директорію .stversions із відповідною позначкою часу, коли вони будуть замінятися або видалятися програмою.",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "Файли захищені від змін на інших вузлах, але зміни на цьому вузлі будуть розіслані на інші вузли кластера.",
-    "Folder": "Директорія",
-    "GUI Authentication Password": "Пароль для доступу до панелі управління",
-    "GUI Authentication User": "Логін користувача для доступу до панелі управління",
-    "GUI Listen Addresses": "Адреса доступу до панелі управління",
-    "Generate": "Згенерувати",
-    "Global Discovery": "Глобальне виявлення",
-    "Global Discovery Server": "Сервер для глобального виявлення",
-    "Global Repository": "Глобальний репозиторій",
-    "Idle": "Очікування",
-    "Ignore Patterns": "Ignore Patterns",
-    "Ignore Permissions": "Ігнорувати права доступу до файлів",
-    "Incoming Rate Limit (KiB/s)": "Ліміт швидкості завантаження (КіБ/с)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "Зберігати версії",
-    "Last seen": "З’являвся останній раз",
-    "Latest Release": "Останній реліз",
-    "Local Discovery": "Локальне виявлення",
-    "Local Discovery Port": "Локальний порт для виявлення",
-    "Local Repository": "Локальний репозиторій",
-    "Master Repo": "Центральний репозиторій",
-    "Max File Change Rate (KiB/s)": "Максимальна швидкість змінення файлів (КіБ/с)",
-    "Max Outstanding Requests": "Максимальна кількість вихідних запитів",
-    "Maximum Age": "Максимальний вік",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
-    "Never": "Ніколи",
-    "No": "Ні",
-    "No File Versioning": "Версіонування вимкнено",
-    "Node ID": "ID вузла",
-    "Node Identification": "Ідентифікатор вузла",
-    "Node Name": "Назва вузла",
-    "Notice": "Повідомлення",
-    "OK": "OK",
-    "Offline": "Офлайн",
-    "Online": "Онлайн",
-    "Out Of Sync": "Не синхронізовано",
-    "Outgoing Rate Limit (KiB/s)": "Ліміт швидкості віддачі (КіБ/с)",
-    "Override Changes": "Перезаписати зміни",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Шлях до репозиторія на локальному комп’ютері. Буде створений, якщо такий не існує. Символ тильди (~) може бути використаний як ярлик для",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "Шлях, де повинні зберігатися версії (залиште порожнім для зберігання в директорію .stversions в репозиторії)",
-    "Please wait": "Будь ласка, зачекайте",
-    "Preview": "Попередній перегляд",
-    "Preview Usage Report": "Попередній перегляд статистичного звіту",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
-    "RAM Utilization": "Використання RAM",
-    "Reconnect Interval (s)": "Інтервал повторного з’єднання (с)",
-    "Repository ID": "ID репозиторія",
-    "Repository Master": "Центральний репозиторій",
-    "Repository Path": "Шлях до репозиторія",
-    "Rescan": "Пересканувати",
-    "Rescan Interval": "Інтервал для повторного сканування",
-    "Rescan Interval (s)": "Інтервал для повторного сканування (с)",
-    "Restart": "Перезапуск",
-    "Restart Needed": "Необхідний перезапуск",
-    "Restarting": "Відбувається перезапуск",
-    "Save": "Зберегти",
-    "Scanning": "Сканування",
-    "Select the nodes to share this repository with.": "Оберіть вузли із якими обміняти даний репозиторій.",
-    "Settings": "Налаштування",
-    "Share With Nodes": "Обмінювати із вузлами",
-    "Shared With": "Доступно для",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "Короткий ідентифікатор репозиторія. Повинен бути однаковим на всіх вузлах кластера.",
-    "Show ID": "Показати ID",
-    "Shown instead of Node ID in the cluster status.": "Показано замість ID вузла в статусі кластера.",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "Показується замість ID вузла в статусі кластера. Буде розголошено іншим вузлам як опціональне типове ім’я.",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "Показується замість ID вузла в статусі кластера. Буде оновлено ім’ям, яке розголошене вузлом, якщо залишити порожнім.",
-    "Shutdown": "Вимкнути",
-    "Simple File Versioning": "Просте версіонування",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Source Code": "Сирцевий код",
-    "Staggered File Versioning": "Поступове версіонування",
-    "Start Browser": "Запустити браузер",
-    "Stopped": "Зупинено",
-    "Support / Forum": "Підтримка / Форум",
-    "Sync Protocol Listen Addresses": "Адреса панелі управління",
-    "Synchronization": "Синхронізація",
-    "Syncing": "Синхронізація",
-    "Syncthing has been shut down.": "Syncthing вимкнено (закрито).",
-    "Syncthing includes the following software or portions thereof:": "Syncthing містить наступне програмне забезпечення (або його частини):",
-    "Syncthing is restarting.": "Syncthing перезавантажується.",
-    "Syncthing is upgrading.": "Syncthing оновлюється.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Схоже на те, що Syncthing закритий, або виникла проблема із Інтернет-з’єднанням. Проводиться повторна спроба з’єднання…",
-    "The aggregated statistics are publicly available at {%url%}.": "Зібрана статистика публічно доступна за посиланням {{url}}.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Конфігурацію збережено, але не активовано. Необхідно перезапустити Syncthing для того, щоби активувати нову конфігурацію.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Зашифрована статистика використання відсилається щоденно. Вона використовується для того, щоб розробники розуміли, на яких платформах працює програма, розміри репозиторіїв та версії програми. Якщо набір даних, що збирається зазнає змін, ви обов’язково будете повідомлені через це діалогове вікно.",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введений ID вузла невалідний. Ідентифікатор має вигляд строки довжиною 52 символи, що містить цифри та літери, із опціональними пробілами та тире.",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Введений ID вузла невалідний. Ідентифікатор має вигляд строки довжиною 52 або 56 символів, що містить цифри та літери, із опціональними пробілами та тире.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Використовуються наступні інтервали: для першої години версія зберігається кожні 30 секунд, для першого дня версія зберігається щогодини, для перших 30 днів версія зберігається кожен день, опісля, до максимального строку, версія зберігається щотижня.",
-    "The maximum age must be a number and cannot be blank.": "Максимальний термін повинен бути числом та не може бути пустим.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Максимальний термін, щоб зберігати версію (у днях, вствновіть в 0, щоби зберігати версії назавжди).",
-    "The node ID cannot be blank.": "ID вузла не може бути порожнім.",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "ID вузла, який необхідно додати. Може бути знайдений у вікні \"Редагувати > Показати ID\" на іншому вузлі. Пробіли та тире опціональні (вони ігноруються програмою).",
-    "The number of old versions to keep, per file.": "Кількість старих версій, яку необхідно зберігати для кожного файлу.",
-    "The number of versions must be a number and cannot be blank.": "Кількість версій повинна бути цифрою та не може бути порожньою.",
-    "The repository ID cannot be blank.": "ID репозиторія не може бути порожнім.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "ID репозиторія повинен бути коротким ідентифікатором (64 символи або менше), що містить лише цифри та літери, знак крапки (.), тире (-) та нижнього підкреслення (_).",
-    "The repository ID must be unique.": "ID репозиторія повинен бути унікальним.",
-    "The repository path cannot be blank.": "Шлях до репозиторія не може бути порожнім.",
-    "The rescan interval must be at least 5 seconds.": "Інтервал повторного сканування повинен бути принаймні 5 секунд.",
-    "Unknown": "Невідомо",
-    "Up to Date": "Актуальа версія",
-    "Upgrade To {%version%}": "Оновити до {{version}}",
-    "Upgrading": "Оновлення",
-    "Upload Rate": "Швидкість віддачі",
-    "Usage": "Допомога",
-    "Use Compression": "Використовувати компресію",
-    "Use HTTPS for GUI": "Використовувати HTTPS для доступу до панелі управління",
-    "Version": "Версія",
-    "Versions Path": "Шлях до версій",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версії автоматично видаляються, якщо вони старше, ніж максимальний вік, або перевищують допустиму кількість файлів за інтервал.",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "Коли додаєте новий вузол, пам’ятайте, що цей вузол повинен бути доданий і на іншій стороні.",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "Коли додаєте новий репозиторій, пам’ятайте, що ID репозиторія використовується для того, щоб зв’язувати репозиторії разом між вузлами. Назви є чутливими до регістра та повинні співпадати точно між усіма вузлами.",
-    "Yes": "Так",
-    "You must keep at least one version.": "Ви повинні зберігати щонайменше одну версію.",
-    "full documentation": "full documentation",
-    "items": "елементи"
-}

gui/lang/lang-zh-CN.json

@@ -1,68 +1,65 @@
 {
     "API Key": "API Key",
     "About": "关于",
-    "Add Node": "添加节点",
-    "Add Repository": "添加仓库",
+    "Add Device": "添加设备",
+    "Add Folder": "添加文件夹",
     "Address": "地址",
     "Addresses": "地址列表",
     "Allow Anonymous Usage Reporting?": "允许匿名使用报告?",
-    "Announce Server": "Announce服务器",
     "Anonymous Usage Reporting": "匿名使用报告",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "在介绍人设备上被添加的其它设备，也将会被添加到本机。",
     "Bugs": "Bug汇报",
     "CPU Utilization": "CPU使用率",
     "Close": "关闭",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Comment, when used at the start of a line": "注释，在行首使用",
+    "Compression is recommended in most setups.": "在大多数场合，建议开启压缩",
     "Connection Error": "连接出错",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "版权© 2014 Jakob Borg 及以下贡献者:",
     "Delete": "删除",
+    "Device ID": "设备ID",
+    "Device Identification": "设备ID",
+    "Device Name": "设备名",
     "Disconnected": "连接已断开",
     "Documentation": "文档",
     "Download Rate": "下载速度",
     "Edit": "选项",
-    "Edit Node": "编辑节点",
-    "Edit Repository": "编辑仓库",
-    "Editing": "Editing",
+    "Edit Device": "修改设备选项",
+    "Edit Folder": "修改文件夹选项",
+    "Editing": "正在编辑",
     "Enable UPnP": "开启UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "输入以半角逗号分隔的\"ip:端口\"设置可用地址列表，或者输入\"dynamic\"表示自动寻找地址。",
-    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
+    "Enter ignore patterns, one per line.": "请输入忽略表达式，每行一个",
     "Error": "错误",
     "File Versioning": "版本控制",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "监控文件改变时，忽略文件权限位。用于FAT文件系统。",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "当文件被syncthing修改或者删除时，将会被移动到.stversions文件夹已保留历史版本。",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "其他节点上的改变不会影响本节点，但对本节点上作出的改变会被发送到节点群中的其他节点。",
-    "Folder": "文件夹",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "在其它设备上对该文件夹内文件的修改并不会被同步到本机，但是在本机上对该文件夹内文件的修改，将会被同步到其它设备。",
+    "Folder ID": "文件夹ID",
+    "Folder Master": "母文件夹",
+    "Folder Path": "文件夹路径",
     "GUI Authentication Password": "登陆web管理页面的密码",
     "GUI Authentication User": "登陆web管理页面的用户名",
     "GUI Listen Addresses": "web管理页面监听地址",
     "Generate": "生成",
     "Global Discovery": "在互联网上寻找节点",
     "Global Discovery Server": "用以在互联网上寻找节点的Announce服务器地址",
-    "Global Repository": "全局仓库",
+    "Global State": "全局状态",
     "Idle": "空闲",
-    "Ignore Patterns": "Ignore Patterns",
+    "Ignore Patterns": "忽略列表",
     "Ignore Permissions": "忽略文件权限",
     "Incoming Rate Limit (KiB/s)": "下载速率限制(千字节/秒)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
+    "Introducer": "介绍人节点",
+    "Inversion of the given condition (i.e. do not exclude)": "对本条件取反（例如：不要排除某项）",
     "Keep Versions": "保留历史版本数量",
     "Last seen": "最后可见",
     "Latest Release": "最新版本",
     "Local Discovery": "在局域网上寻找节点",
-    "Local Discovery Port": "局域网寻找监听端口",
-    "Local Repository": "本地仓库",
-    "Master Repo": "主仓库",
-    "Max File Change Rate (KiB/s)": "最大文件变化速率(千字节/每秒)",
-    "Max Outstanding Requests": "同时可响应的请求数上限",
+    "Local State": "本地状态",
     "Maximum Age": "历史版本最长保留时间",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
+    "Multi level wildcard (matches multiple directory levels)": "多级通配符（用以匹配多层文件夹）",
     "Never": "从未",
     "No": "否",
     "No File Versioning": "不启用版本控制",
-    "Node ID": "节点ID",
-    "Node Identification": "节点ID",
-    "Node Name": "节点名",
     "Notice": "提示",
     "OK": "确定",
     "Offline": "离线",
@@ -70,37 +67,31 @@
     "Out Of Sync": "未同步",
     "Outgoing Rate Limit (KiB/s)": "上传速度限制(千字节/秒)",
     "Override Changes": "撤销改变",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "该仓库的本地路径。如果该路径不存在，则会自动创建。波浪线字符(~)代表了以下文件夹：",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "历史版本保存路径（若留空，则会保存在默认的.stversions文件夹）",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "文件夹在本地的路径。如果不存在，则会被创建。波浪线符号（~）是如下路径的缩略符：",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "用来存储历史版本的文件夹（留空则将会存储在默认的.stversions文件夹）",
     "Please wait": "请稍候",
     "Preview": "预览",
     "Preview Usage Report": "预览使用报告",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
+    "Quick guide to supported patterns": "支持的通配符的简单教程：",
     "RAM Utilization": "内存使用量",
-    "Reconnect Interval (s)": "重连间隔(秒)",
-    "Repository ID": "仓库ID",
-    "Repository Master": "主仓库",
-    "Repository Path": "仓库路径",
     "Rescan": "重新扫描",
     "Rescan Interval": "扫描间隔",
-    "Rescan Interval (s)": "扫描间隔(秒)",
     "Restart": "重启syncthing",
     "Restart Needed": "需要重启Syncthing",
     "Restarting": "重启中",
     "Save": "保存",
     "Scanning": "扫描中",
-    "Select the nodes to share this repository with.": "选择将本仓库共享给哪些节点",
+    "Select the devices to share this folder with.": "选择将本文件夹共享给哪些设备",
     "Settings": "设置",
-    "Share With Nodes": "共享给下列节点",
+    "Share With Devices": "共享给",
     "Shared With": "共享给",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "该仓库的ID。在所有节点上必须一致。",
-    "Show ID": "显示节点ID",
-    "Shown instead of Node ID in the cluster status.": "在目标节点状态中显示该名字,以替代节点ID",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "在节点群中，将会显示本名称，而不是节点ID。同时也会被做为默认名称，通告至其他节点。",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "在节点群中，将会显示本名称，而不是节点ID。如果设置为空，则会使用目标节点提供的默认名称。",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "文件夹的别名。必须在所有设备上保持一致。",
+    "Show ID": "显示设备ID",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "在设备丛中，显示该名称，而不是设备ID。亦会作为一个可选的默认名称被发送到其他设备。",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "在设备丛中，将会显示本名称，而不是设备ID。如果设置为空，则会使用目标设备提供的默认名称。",
     "Shutdown": "关闭Syncthing",
     "Simple File Versioning": "简易版本控制",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
+    "Single level wildcard (matches within a directory only)": "单级通配符（仅匹配单层文件夹）",
     "Source Code": "源代码",
     "Staggered File Versioning": "阶段版本控制",
     "Start Browser": "启动浏览器",
@@ -116,37 +107,34 @@
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing似乎关闭了，或者您的网络连接存在故障。重试中...",
     "The aggregated statistics are publicly available at {%url%}.": "全局统计公布于 {{url}}",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "设置已经保存，但是还未生效。Syncthing需要重启以启用新的设置。",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "经过加密的使用报告会每天发送。它用来跟踪统计使用本软件的平台，仓库大小，以及本软件的版本。如果报告的内容有任何变化，本对话框会再次弹出提示您。",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "输入的节点ID似乎无效。节点ID长度必须为52的字母和数字。空格和横线不算在内。",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "输入的节点ID似乎无效。节点ID长度必须为52或56的字母和数字。空格和横线不算在内。",
+    "The device ID cannot be blank.": "设备ID不能为空",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "在这里所需要输入的设备ID，可以在目标设备的“选项->显示设备ID\"中看到。空格和横线可选（将会被忽略）。",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "经过加密的使用报告会每天发送。它用来跟踪统计使用本软件的平台，文件夹大小，以及本软件的版本。如果报告的内容有任何变化，本对话框会再次弹出提示您。",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "输入的设备ID似乎无效。设备ID长度必须为52或56的字母和数字。空格和横线不算在内。",
+    "The folder ID cannot be blank.": "文件夹ID不能为空。",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "文件夹ID至多为64字节，且仅能包含字母，数字，半角句号（.），横线（-），下划线（_）。",
+    "The folder ID must be unique.": "文件夹ID必须唯一。",
+    "The folder path cannot be blank.": "文件夹路径不能为空。",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "保留的历史版本会满足以下条件：最近一小时内的历史版本，更新间隔小于30秒的仅保留一份。最近一天内的历史版本，更新间隔小于1小时的仅保留一份。最近一个月内的历史版本，更新间隔小于1天的仅保留一份。距离现在超过一个月且小于最长保留时间的，更新间隔小于1周的仅保留一份。",
     "The maximum age must be a number and cannot be blank.": "最长保留时间必须为数字，且不能为空。",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "历史版本保留的最长天数，0为永久保存",
-    "The node ID cannot be blank.": "节点ID不能为空",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "在这里需要输入的节点ID，可以在目标节点管理页面右上角的\"选项>显示节点ID\"获得。空格和横线会被自动忽略。",
     "The number of old versions to keep, per file.": "每个文件保留的版本数量上限。",
     "The number of versions must be a number and cannot be blank.": "保留版本数量必须为数字，且不能为空。",
-    "The repository ID cannot be blank.": "仓库ID不能为空。",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "仓库ID的长度,必须在64字节或更少，只能包含字母，数字，点(.),以及下划线(_)",
-    "The repository ID must be unique.": "仓库ID必须唯一。",
-    "The repository path cannot be blank.": "仓库路径不能为空。",
     "The rescan interval must be at least 5 seconds.": "扫描间隔必须至少为5秒。",
     "Unknown": "未知",
     "Up to Date": "同步完成",
     "Upgrade To {%version%}": "升级至版本{{version}}",
     "Upgrading": "升级中",
     "Upload Rate": "上传速度",
-    "Usage": "使用情况",
     "Use Compression": "使用压缩",
     "Use HTTPS for GUI": "使用HTTPS连接web管理页面",
     "Version": "版本",
     "Versions Path": "历史版本路径",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "超过最长保留时间，或者不满足下列条件的历史版本，将会被删除。",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "当您在本节点上添加新节点时，也必须在您所添加的节点上添加本节点。",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "添加新仓库时需要注意，仓库ID是用来在不同节点间绑定关联的仓库的。仓库ID是大小写敏感的，而且在所有的节点中必须完全相同，才能正确建立同步。",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "若您在本机添加新设备，记住您也必须在这个设备上添加本机。",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "若你添加了新文件夹，记住文件夹ID是用以在不同设备间建立联系的。在不同设备间拥有相同ID的文件夹将会被同步。且文件夹ID大小写敏感。",
     "Yes": "是",
     "You must keep at least one version.": "您必须保留至少一个版本。",
-    "full documentation": "full documentation",
+    "full documentation": "完整文档",
     "items": "条目"
 }

gui/lang/lang-zh-TW.json

@@ -1,68 +1,65 @@
 {
     "API Key": "API 金鑰",
     "About": "關於",
-    "Add Node": "增加節點",
-    "Add Repository": "增加儲存庫",
+    "Add Device": "Add Device",
+    "Add Folder": "Add Folder",
     "Address": "位址",
     "Addresses": "位址",
     "Allow Anonymous Usage Reporting?": "允許匿名的使用資訊回報？",
-    "Announce Server": "發佈伺服器",
     "Anonymous Usage Reporting": "匿名的使用資訊回報",
-    "Any nodes configured on an introducer node will be added to this node as well.": "Any nodes configured on an introducer node will be added to this node as well.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
     "Bugs": "程式錯誤",
     "CPU Utilization": "CPU 使用率",
     "Close": "關閉",
-    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
-    "Compression is recommended in most setups.": "Compression is recommended in most setups.",
+    "Comment, when used at the start of a line": "註解，當輸入在一行的開頭時",
+    "Compression is recommended in most setups.": "建議在大多數的設置中使用壓縮。",
     "Connection Error": "連線錯誤",
     "Copyright © 2014 Jakob Borg and the following Contributors:": "版權所有 © 2014 Jakob Borg 及以下貢獻者：",
     "Delete": "刪除",
+    "Device ID": "Device ID",
+    "Device Identification": "Device Identification",
+    "Device Name": "Device Name",
     "Disconnected": "斷線",
     "Documentation": "說明文件",
     "Download Rate": "下載速率",
     "Edit": "編輯",
-    "Edit Node": "編輯節點",
-    "Edit Repository": "編輯儲存庫",
-    "Editing": "Editing",
+    "Edit Device": "Edit Device",
+    "Edit Folder": "Edit Folder",
+    "Editing": "正在編輯",
     "Enable UPnP": "啟用 UPnP",
     "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "輸入以半形逗號區隔的 \"ip:連接埠\" 位址，或著輸入 \"dynamic\" 以進行位址的自動探索",
-    "Enter ignore patterns, one per line.": "輸入忽略樣式，一行一種。",
+    "Enter ignore patterns, one per line.": "輸入忽略樣式，每行一種。",
     "Error": "錯誤",
     "File Versioning": "檔案版本控制",
     "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "當在尋找變化時，檔案權限位元會被忽略。用於 FAT 檔案系統。",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "當檔案被 syncthing 取代或刪除時，它們將被移至 .stversions 資料夾並添加日期戳記。",
-    "Files are protected from changes made on other nodes, but changes made on this node will be sent to the rest of the cluster.": "其他節點做的改變不會影響到此節點的檔案，但在此節點上的變化將被發送到叢集中的其他部分。",
-    "Folder": "資料夾",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.",
+    "Folder ID": "Folder ID",
+    "Folder Master": "Folder Master",
+    "Folder Path": "Folder Path",
     "GUI Authentication Password": "GUI 認證密碼",
     "GUI Authentication User": "GUI 認證使用者名稱",
     "GUI Listen Addresses": "GUI 監聽位址",
     "Generate": "產生",
     "Global Discovery": "全域探索",
     "Global Discovery Server": "全域探索伺服器",
-    "Global Repository": "全域儲存庫",
+    "Global State": "Global State",
     "Idle": "閒置",
     "Ignore Patterns": "忽略樣式",
     "Ignore Permissions": "忽略權限",
     "Incoming Rate Limit (KiB/s)": "連入速率限制 (KiB/s)",
-    "Introducer": "Introducer",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
-    "Keep Versions": "保留版本數",
+    "Introducer": "引入者",
+    "Inversion of the given condition (i.e. do not exclude)": "反轉給定條件 (即：不要排除)",
+    "Keep Versions": "保留歷史版本數",
     "Last seen": "最後發現時間",
     "Latest Release": "最新發佈",
     "Local Discovery": "本地探索",
-    "Local Discovery Port": "本地探索連接埠",
-    "Local Repository": "本地儲存庫",
-    "Master Repo": "主儲存庫",
-    "Max File Change Rate (KiB/s)": "最大檔案改變速率 (KiB/s)",
-    "Max Outstanding Requests": "最多待處理的請求數",
-    "Maximum Age": "最長存留時間",
-    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
+    "Local State": "Local State",
+    "Maximum Age": "最長保留時間",
+    "Multi level wildcard (matches multiple directory levels)": "多階層萬用字元 (可比對多層資料夾)",
     "Never": "從未",
     "No": "否",
     "No File Versioning": "無檔案版本控制",
-    "Node ID": "節點識別碼",
-    "Node Identification": "節點識別",
-    "Node Name": "節點名稱",
     "Notice": "注意",
     "OK": "確定",
     "Offline": "離線",
@@ -70,37 +67,31 @@
     "Out Of Sync": "不同步",
     "Outgoing Rate Limit (KiB/s)": "連出速率限制 (KiB/s)",
     "Override Changes": "覆蓋改變",
-    "Path to the repository on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "儲存庫在本地電腦的路徑。若資料夾不存在則會建立。波浪符號 (~) 可用作下列資料夾的捷徑：",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the repository).": "儲存歷史版本的路徑 (若為空，則預設使用儲存庫中的 .stversions 資料夾)。",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Path where versions should be stored (leave empty for the default .stversions folder in the folder).",
     "Please wait": "請稍後",
     "Preview": "預覽",
     "Preview Usage Report": "預覽使用資訊報告",
-    "Quick guide to supported patterns": "Quick guide to supported patterns",
+    "Quick guide to supported patterns": "可支援樣式的快速指南",
     "RAM Utilization": "記憶體使用率",
-    "Reconnect Interval (s)": "重新連接間隔 (秒)",
-    "Repository ID": "儲存庫識別碼",
-    "Repository Master": "主儲存庫",
-    "Repository Path": "儲存庫路徑",
     "Rescan": "重新掃描",
     "Rescan Interval": "重新掃描間隔",
-    "Rescan Interval (s)": "掃描間隔 (秒)",
     "Restart": "重新啟動",
     "Restart Needed": "需要重新啟動",
     "Restarting": "正在重新啟動",
     "Save": "儲存",
     "Scanning": "正在掃描",
-    "Select the nodes to share this repository with.": "選擇要共享這個儲存庫的節點。",
+    "Select the devices to share this folder with.": "Select the devices to share this folder with.",
     "Settings": "設定",
-    "Share With Nodes": "與節點共享",
+    "Share With Devices": "Share With Devices",
     "Shared With": "與誰共享",
-    "Short identifier for the repository. Must be the same on all cluster nodes.": "儲存庫的簡短識別碼。必須在所有叢集節點上皆相同。",
+    "Short identifier for the folder. Must be the same on all cluster devices.": "Short identifier for the folder. Must be the same on all cluster devices.",
     "Show ID": "顯示識別碼",
-    "Shown instead of Node ID in the cluster status.": "代替節點識別碼顯示在叢集狀態中。",
-    "Shown instead of Node ID in the cluster status. Will be advertised to other nodes as an optional default name.": "代替節點識別碼顯示在叢集狀態中。這段文字將會廣播到其他的節點作為一個可選的預設名稱。",
-    "Shown instead of Node ID in the cluster status. Will be updated to the name the node advertises if left empty.": "代替節點識別碼顯示在叢集狀態中。本欄若未填寫則將被更新為此節點所廣播的名稱。",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
     "Shutdown": "關閉",
     "Simple File Versioning": "簡單檔案版本控制",
-    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
+    "Single level wildcard (matches within a directory only)": "單階層萬用字元 (只在單個資料夾階層內比對)",
     "Source Code": "原始碼",
     "Staggered File Versioning": "變動式檔案版本控制",
     "Start Browser": "啟動瀏覽器",
@@ -114,39 +105,36 @@
     "Syncthing is restarting.": "Syncthing 正在重新啟動。",
     "Syncthing is upgrading.": "Syncthing 正在進行升級。",
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing 似乎下線了，或者您的網際網路連線出現問題。正在重試...",
-    "The aggregated statistics are publicly available at {%url%}.": "匯總統計公佈於 {{url}}。",
+    "The aggregated statistics are publicly available at {%url%}.": "匯總統計資訊公佈於 {{url}}。",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "組態已經儲存但尚未啟用。Syncthing 必須重新啟動以便啟用新的組態。",
-    "The encrypted usage report is sent daily. It is used to track common platforms, repo sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "經過加密的使用資訊報告會每天傳送。報告是用來追蹤常用的平台、儲存庫的大小以及應用程式的版本。若傳送的資料集有異動，您會再次看到這個對話框。",
-    "The entered node ID does not look valid. It should be a 52 character string consisting of letters and numbers, with spaces and dashes being optional.": "輸入的節點識別碼似乎無效。它應該為一串包含半形英文字母及數字，並可能會含有空白或連接符號的字串，且長度為 52 個字元。",
-    "The entered node ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "輸入的節點識別碼似乎無效。它應該為一串包含半形英文字母及數字，並可能會含有空白或連接符號的字串，且長度為 52 或 56 個字元。",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "使用下列的間隔：在第一個小時內每 30 秒保留一個版本，在第一天內每小時保留一個版本，在第 30 天內每一天保留一個版本，在達到最長存留時間前每一星期保留一個版本。",
-    "The maximum age must be a number and cannot be blank.": "最長存留時間最大必須為一個數字且不得為空。",
+    "The device ID cannot be blank.": "The device ID cannot be blank.",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.",
+    "The folder ID cannot be blank.": "The folder ID cannot be blank.",
+    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
+    "The folder ID must be unique.": "The folder ID must be unique.",
+    "The folder path cannot be blank.": "The folder path cannot be blank.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "使用下列的間隔：在第一個小時內每 30 秒保留一個版本，在第一天內每小時保留一個版本，在第 30 天內每一天保留一個版本，在達到最長保留時間前每一星期保留一個版本。",
+    "The maximum age must be a number and cannot be blank.": "最長保留時間最大必須為一個數字且不得為空。",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "一個版本被保留的最長時間 (單位為天，若設定為 0 則表示永遠保留)。",
-    "The node ID cannot be blank.": "節點識別碼不能為空白。",
-    "The node ID to enter here can be found in the \"Edit > Show ID\" dialog on the other node. Spaces and dashes are optional (ignored).": "要輸入在這裡的節點識別碼可以在其他節點的 \"編輯 > 顯示識別碼\" 對話框找到。空白以及連接符號可不輸入 (省略)。",
     "The number of old versions to keep, per file.": "每個檔案要保留的舊版本數量。",
     "The number of versions must be a number and cannot be blank.": "每個檔案要保留的舊版本數量必須是數字且不能為空白。",
-    "The repository ID cannot be blank.": "儲存庫識別碼不能為空白。",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "儲存庫識別碼必須為一段只包含半形英文字母、數字、點 (.)、連接符號 (-) 以及底線 (_) 的簡短識別碼 (不多於 64 個字元)",
-    "The repository ID must be a short identifier (64 characters or less) consisting of letters, numbers and the the dot (.), dash (-) and underscode (_) characters only.": "儲存庫識別碼必須為一段只包含半形英文字母、數字、點 (.)、連接符號 (-) 以及底線 (_) 的簡短識別碼 (不多於 64 個字元)",
-    "The repository ID must be unique.": "儲存庫識別碼必須為獨一無二的。",
-    "The repository path cannot be blank.": "儲存庫路徑不能空白。",
-    "The rescan interval must be at least 5 seconds.": "重新掃描間隔至少必須為 5 秒。",
+    "The rescan interval must be at least 5 seconds.": "重新掃描間隔至少須為 5 秒。",
     "Unknown": "未知",
     "Up to Date": "最新",
     "Upgrade To {%version%}": "升級到 {{version}}",
     "Upgrading": "正在升級",
     "Upload Rate": "上載速率",
-    "Usage": "使用",
     "Use Compression": "使用壓縮",
     "Use HTTPS for GUI": "為 GUI 使用 HTTPS",
     "Version": "版本",
     "Versions Path": "歷史版本路徑",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "當檔案歷史版本的存留時間大於設定的最大值，或是其數量在一段時間內超出允許值時，則會被刪除。",
-    "When adding a new node, keep in mind that this node must be added on the other side too.": "當新增一個節點時，請記住，這個節點也必須被添加至另一邊。",
-    "When adding a new repository, keep in mind that the Repository ID is used to tie repositories together between nodes. They are case sensitive and must match exactly between all nodes.": "當新增一個儲存庫時，請記住，儲存庫識別碼是用來將節點之間的儲存庫綁定在一起的。它們有區分大小寫，且必須在所有節點之間完全相同。",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
     "Yes": "是",
     "You must keep at least one version.": "您必須保留至少一個版本。",
-    "full documentation": "full documentation",
+    "full documentation": "完整說明文件",
     "items": "個項目"
 }

gui/lang/valid-langs.js

@@ -1 +1 @@
-var validLangs = ["bg","ca","da","de","el","en","es","fr","hu","it","lt","nl","pt-PT","ru","sv","tr","uk","zh-CN","zh-TW"]
+var validLangs = ["bg","de","en","fr","it","lt","pt-PT","sv","zh-CN","zh-TW"]