--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -41,7 +41,7 @@ mediatek_setup_interfaces()
 	bananapi,bpi-r4)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 eth1" "wan eth2"
 		;;
-	cmcc,rax3000m|\
+	cmcc,rax3000m*|\
 	h3c,magic-nx30-pro|\
 	zbtlink,zbt-z8103ax)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1

--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -280,7 +280,38 @@ define Device/cmcc_rax3000m
   ARTIFACT/nand-preloader.bin := mt7981-bl2 spim-nand-ddr4
   ARTIFACT/nand-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-nand
 endef
-TARGET_DEVICES += cmcc_rax3000m
+
+define Device/cmcc_rax3000m-nand
+  DEVICE_VENDOR := CMCC
+  DEVICE_MODEL := RAX3000M NAND
+  DEVICE_DTS := mt7981b-cmcc-rax3000m-nand
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
+	e2fsprogs f2fsck mkf2fs
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 116736k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += cmcc_rax3000m-nand
+
+define Device/cmcc_rax3000m-emmc
+  DEVICE_VENDOR := CMCC
+  DEVICE_MODEL := RAX3000M eMMC
+  DEVICE_DTS := mt7981b-cmcc-rax3000m-emmc
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
+	e2fsprogs f2fsck mkf2fs losetup kmod-fs-f2fs kmod-mmc
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += cmcc_rax3000m-emmc
 
 define Device/confiabits_mt7981
   DEVICE_VENDOR := Confiabits

--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -119,6 +119,7 @@ platform_do_upgrade() {
 	yuncore,ax835)
 		default_do_upgrade "$1"
 		;;
+	cmcc,rax3000m-emmc|\
 	glinet,gl-mt2500|\
 	glinet,gl-mt6000|\
 	glinet,gl-x3000|\
@@ -215,6 +216,7 @@ platform_copy_config() {
 			;;
 		esac
 		;;
+  	cmcc,rax3000m-emmc|\
 	acer,predator-w6|\
 	glinet,gl-mt2500|\
 	glinet,gl-mt6000|\

--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
@@ -31,6 +31,7 @@ case "$FIRMWARE" in
 			;;
 		esac
 		;;
+	cmcc,rax3000m-emmc|\
 	ubnt,unifi-6-plus)
 		caldata_extract_mmc "factory" 0x0 0x1000
 		;;