OpenWrt_x86-r2s-r4s-r5s-N1/devices/ramips_mt7620/patches/mir3.patch

From aa2cc7b9d5124216f0ea377f9ffe28e494da20c6 Mon Sep 17 00:00:00 2001
From: Chen Minqiang <[email protected]>
Date: Sat, 18 Nov 2017 21:35:39 +0800
Subject: [PATCH] ramips: add xiaomi_miwifi-r3 support

Specification:
 - CPU: 580 MHz
 - Flash size: 128 MiB NAND
 - RAM size: 128 MiB DDR2
 - Wireless No1: SoC-integrated: MT7620A 2x2 MIMO 802.11b/g/n (2.4 GHz)
 - Wireless No2: On-board chip: MT7612E 2x2 MIMO 802.11a/n/ac (5 GHz)
 - Switch: MT7620 built-in 10/100 switch w/ vlan support
 - USB: 2.0 x1

Flash instructions:
 1. access ssh via https://wiki.openwrt.org/toh/xiaomi/mir3
 2. in ssh:
      nvram set flag_last_success=1
      nvram set boot_wait=on
      nvram set uart_en=1
      nvram commit
      mtd write lede-ramips-mt7620-miwifi-r3-squashfs-kernel1.bin kernel1
      mtd write lede-ramips-mt7620-miwifi-r3-squashfs-rootfs0.bin rootfs0
      reboot

If you want to revert back to stock fw while on LEDE:
  insert usb stick (FAT/FAT32) with stock fw renamed to miwifi.bin
  fw_setenv flag_last_success 0
  power off the device
  hold the reset button and power on the device, keep holding the reset button until yellow led starts blinking.

Signed-off-by: Chen Minqiang <[email protected]>
---
 package/boot/uboot-envtools/files/ramips      |   1 +
 .../ramips/dts/mt7620a_xiaomi_miwifi-r3.dts   | 187 ++++++++++++++++++
 target/linux/ramips/image/mt7620.mk           |  17 ++
 .../mt7620/base-files/etc/board.d/02_network  |   8 +
 .../mt7620/base-files/lib/upgrade/platform.sh |   7 +
 5 files changed, 220 insertions(+)
 create mode 100644 target/linux/ramips/dts/mt7620a_xiaomi_miwifi-r3.dts

diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 05ca7ffd12c8..6afc4470f7a7 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -79,6 +79,7 @@ xiaomi,mi-router-3g|\
 xiaomi,mi-router-3-pro|\
 xiaomi,mi-router-4|\
 xiaomi,mi-router-ac2100|\
+xiaomi,miwifi-r3|\
 xiaomi,redmi-router-ac2100)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
 	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x4000" "0x20000"
diff --git a/target/linux/ramips/dts/mt7620a_xiaomi_miwifi-r3.dts b/target/linux/ramips/dts/mt7620a_xiaomi_miwifi-r3.dts
new file mode 100644
index 000000000000..301b6e3a02e6
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_xiaomi_miwifi-r3.dts
@@ -0,0 +1,187 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "xiaomi,miwifi-r3", "ralink,mt7620a-soc";
+	model = "Xiaomi Mi Router R3";
+
+	aliases {
+		led-status = &led_status_blue;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_blue: blue {
+			label = "blue:status";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		yellow {
+			label = "yellow:status";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "red:status";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	nand {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mtk,mt7620-nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Bootloader";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "Config";
+				reg = <0x40000 0x40000>;
+			};
+
+			partition@80000 {
+				label = "Bdata";
+				reg = <0x80000 0x40000>;
+				read-only;
+			};
+
+			factory: partition@0xc0000 {
+				label = "factory";
+				reg = <0xc0000 0x40000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "crash";
+				reg = <0x100000 0x40000>;
+				read-only;
+			};
+
+			partition@140000 {
+				label = "crash_syslog";
+				reg = <0x140000 0x40000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "reserved0";
+				reg = <0x180000 0x80000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "kernel_stock";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "kernel";
+				reg = <0x600000 0x400000>;
+			};
+
+			/* ubi partition is the result of squashing
+			 * next consequent stock partitions:
+			 * - rootfs0 (rootfs partition for stock kernel0),
+			 * - rootfs1 (rootfs partition for stock failsafe kernel1),
+			 * - overlay (used as ubi overlay in stock fw)
+			 * resulting 117,5MiB space for packages.
+			 */
+			partition@a00000 {
+				label = "ubi";
+				reg = <0xa00000 0x7600000>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+	mtd-mac-address = <&factory 0x28>;
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci14c3,7662";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			groups = "rgmii1";
+			function = "gpio";
+		};
+
+		pa {
+			groups = "pa";
+			function = "pa";
+		};
+	};
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_28: macaddr@28 {
+		reg = <0x28 0x6>;
+	};
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index a9dea1db57f9..ebf4cfc4117c 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -1248,6 +1248,23 @@ define Device/xiaomi_miwifi-mini
 endef
 TARGET_DEVICES += xiaomi_miwifi-mini
 
+define Device/xiaomi_miwifi-r3
+  SOC := mt7620a
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_SIZE := 4096k
+  IMAGE_SIZE := 32768k
+  UBINIZE_OPTS := -E 5
+  IMAGES += kernel1.bin rootfs0.bin
+  IMAGE/kernel1.bin := append-kernel | check-size $$$$(KERNEL_SIZE)
+  IMAGE/rootfs0.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  DEVICE_VENDOR := Xiaomi
+  DEVICE_MODEL := Mi Router R3
+  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci uboot-envtools
+endef
+TARGET_DEVICES += xiaomi_miwifi-r3
+
 define Device/youku_yk-l1
   SOC := mt7620a
   IMAGE_SIZE := 32448k
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index f7bc41669f80..e252b6e04611 100644
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -240,6 +240,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "4:wan" "6@eth0"
 		;;
+	xiaomi,miwifi-r3)
+		ucidef_add_switch "switch0" \
+			"1:lan" "4:lan" "0:wan" "6@eth0"
+		;;
 	zbtlink,zbt-we1026-5g-16m)
 		ucidef_add_switch "switch0" \
 			"0:lan" "6t@eth0"
@@ -384,6 +388,10 @@ ramips_setup_macs()
 		wan_mac=$(mtd_get_mac_binary factory 0x2e)
 		label_mac=$(mtd_get_mac_binary factory 0x8004)
 		;;
+	xiaomi,miwifi-r3)
+		wan_mac=$(mtd_get_mac_binary factory 0x28)
+		lan_mac=$(macaddr_setbit_la "$wan_mac")
+		;;
 	zbtlink,zbt-we1026-5g-16m)
 		label_mac=$(mtd_get_mac_binary factory 0x4)
 		;;
diff --git a/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
index 9f71dc918e50..5519312289fa 100755
--- a/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
@@ -30,6 +30,11 @@ platform_do_upgrade() {
 		}
 		default_do_upgrade "$1"
 		;;
+	xiaomi,miwifi-r3)
+		# this make it compatible with breed
+		dd if=/dev/mtd0 bs=64 count=1 2>/dev/null | grep -qi breed && CI_KERNPART_EXT="kernel_stock"
+		nand_do_upgrade "$1"
+		;;
 	*)
 		default_do_upgrade "$1"
 		;;