airoha: an7581: disable all switch port and phy by default

Some board only use some of them, so enable as necessary in
board-level dts.

Signed-off-by: Ziyang Huang <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/20482
Signed-off-by: Hauke Mehrtens <[email protected]>

target/linux/airoha/dts/an7581-evb-emmc.dts

@@ -253,6 +253,10 @@
 	status = "okay";
 };
 
+&gsw_port1 {
+	status = "okay";
+};
+
 &gsw_phy1 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp1_led0_pins>;
@@ -263,6 +267,10 @@
 	status = "okay";
 };
 
+&gsw_port2 {
+	status = "okay";
+};
+
 &gsw_phy2 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp2_led0_pins>;
@@ -273,6 +281,10 @@
 	status = "okay";
 };
 
+&gsw_port3 {
+	status = "okay";
+};
+
 &gsw_phy3 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp3_led0_pins>;
@@ -283,6 +295,10 @@
 	status = "okay";
 };
 
+&gsw_port4 {
+	status = "okay";
+};
+
 &gsw_phy4 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp4_led0_pins>;

target/linux/airoha/dts/an7581-evb.dts

@@ -218,6 +218,10 @@
 	status = "okay";
 };
 
+&gsw_port1 {
+	status = "okay";
+};
+
 &gsw_phy1 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp1_led0_pins>;
@@ -228,6 +232,10 @@
 	status = "okay";
 };
 
+&gsw_port2 {
+	status = "okay";
+};
+
 &gsw_phy2 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp2_led0_pins>;
@@ -238,6 +246,10 @@
 	status = "okay";
 };
 
+&gsw_port3 {
+	status = "okay";
+};
+
 &gsw_phy3 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp3_led0_pins>;
@@ -248,6 +260,10 @@
 	status = "okay";
 };
 
+&gsw_port4 {
+	status = "okay";
+};
+
 &gsw_phy4 {
 	pinctrl-names = "gbe-led";
 	pinctrl-0 = <&gswp4_led0_pins>;

target/linux/airoha/dts/an7581.dtsi

@@ -945,6 +945,7 @@
 					label = "lan1";
 					phy-mode = "internal";
 					phy-handle = <&gsw_phy1>;
+					status = "disabled";
 				};
 
 				gsw_port2: port@2 {
@@ -952,6 +953,7 @@
 					label = "lan2";
 					phy-mode = "internal";
 					phy-handle = <&gsw_phy2>;
+					status = "disabled";
 				};
 
 				gsw_port3: port@3 {
@@ -959,6 +961,7 @@
 					label = "lan3";
 					phy-mode = "internal";
 					phy-handle = <&gsw_phy3>;
+					status = "disabled";
 				};
 
 				gsw_port4: port@4 {
@@ -966,6 +969,7 @@
 					label = "lan4";
 					phy-mode = "internal";
 					phy-handle = <&gsw_phy4>;
+					status = "disabled";
 				};
 
 				port@6 {
@@ -990,6 +994,7 @@
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <9>;
 					phy-mode = "internal";
+					status = "disabled";
 
 					leds {
 						#address-cells = <1>;
@@ -1013,6 +1018,7 @@
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <10>;
 					phy-mode = "internal";
+					status = "disabled";
 
 					leds {
 						#address-cells = <1>;
@@ -1036,6 +1042,7 @@
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <11>;
 					phy-mode = "internal";
+					status = "disabled";
 
 					leds {
 						#address-cells = <1>;
@@ -1059,6 +1066,7 @@
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <12>;
 					phy-mode = "internal";
+					status = "disabled";
 
 					leds {
 						#address-cells = <1>;