avr32: update to latest atmel sources

SVN-Revision: 11665

target/linux/avr32/Makefile

@@ -10,7 +10,7 @@ ARCH:=avr32
 BOARD:=avr32
 BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
-LINUX_VERSION:=2.6.25.9
+LINUX_VERSION:=2.6.25.10
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/avr32/config-default

@@ -128,12 +128,14 @@ CONFIG_MTD_PHYSMAP_START=0x80000000
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
 # CONFIG_NMI_DEBUGGING is not set
 CONFIG_NO_HZ=y
+CONFIG_NR_QUICK=2
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PHYLIB=y
 CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PLATFORM_AT32AP=y
 # CONFIG_QSEMI_PHY is not set
+CONFIG_QUICKLIST=y
 # CONFIG_REALTEK_PHY is not set
 CONFIG_RTC_CLASS=m
 CONFIG_RTC_DRV_AT32AP700X=m

target/linux/avr32/patches/120-fast_sd_cards_fix.patch

@@ -1,43 +0,0 @@
---- a/drivers/mmc/host/atmel-mci.c
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -77,6 +77,7 @@ struct atmel_mci {
- 	struct clk		*mck;
- 	struct platform_device	*pdev;
- 
-+	int pending_stop;
- #ifdef CONFIG_DEBUG_FS
- 	struct dentry		*debugfs_root;
- 	struct dentry		*debugfs_regs;
-@@ -866,6 +867,12 @@ static void atmci_tasklet_func(unsigned long priv)
- 		data->bytes_xfered = data->blocks * data->blksz;
- 		atmci_data_complete(host, data);
- 	}
-+	/* See if there is a pending STOP which can be sent */
-+	if (host->pending_stop && mci_cmd_is_complete(host)) {
-+		host->pending_stop = 0;
-+		if (mrq->stop && !mci_set_stop_sent_is_completed(host))
-+			send_stop_cmd(host->mmc, mrq->data, 0);
-+	}
- }
- 
- static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-@@ -918,9 +925,16 @@ static void atmci_xfer_complete(struct dma_request *_req)
- 	 * drivers) or when interrupts are disabled for a long time.
- 	 */
- 	mci_set_dma_complete(host);
--	if (data->stop && mci_cmd_is_complete(host)
--			&& !mci_set_stop_sent_is_completed(host))
--		send_stop_cmd(host->mmc, data, 0);
-+
-+	if (data->stop) {
-+		if (!mci_cmd_is_complete(host)) {
-+			/* Just remember a STOP must be sent */
-+			host->pending_stop = 1;
-+		} else if (!mci_set_stop_sent_is_completed(host)) {
-+			send_stop_cmd(host->mmc, data, 0);
-+			host->pending_stop = 0;
-+		}
-+	}
- 
- 	/*
- 	 * Regardless of what the documentation says, we have to wait