Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).

SVN-Revision: 24040

target/linux/brcm63xx/image/Makefile

@@ -172,6 +172,9 @@ define Image/Build
 	# RG100A,DB120 etc.
 	$(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
 
+	# Telsey CPVA642-type (e.g. CPA-ZNTE60T)
+	$(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
+
 endef
 
 $(eval $(call BuildImage))

target/linux/brcm63xx/patches-2.6.35/310-CPVA642_board.patch

@@ -0,0 +1,37 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -677,6 +677,26 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_CPVA642 = {
++	.name                           = "CPVA642",
++	.expected_cpu_id                = 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet1                      = 1,
++	.has_pci                        = 1,
++
++	.enet1 = {
++		.force_speed_100        = 1,
++		.force_duplex_full      = 1,
++ 	},
++
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++
++	/* GPIOs not yet known for this device */
++};
++
++
+ static struct board_info __initdata board_AGPFS0 = {
+ 	.name                           = "AGPF-S0",
+ 	.expected_cpu_id                = 0x6358,
+@@ -1339,6 +1359,7 @@ static const struct board_info __initdat
+ 	&board_96358vw,
+ 	&board_96358vw2,
+ 	&board_AGPFS0,
++	&board_CPVA642,
+ 	&board_DWVS0,
+ 	&board_nb4_ser_r0,
+ 	&board_nb4_ser_r1,