kirkwood: sort occurrences of boardame alphabetically

This restores the alphabetical sort that was present
before the renaming of boardname.

Signed-off-by: Mathias Kresin <[email protected]>

package/boot/uboot-envtools/files/kirkwood

@@ -13,13 +13,13 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
-seagate,dockstar|\
-raidsonic,ib-nas62x0|\
+cloudengines,pogoe02|\
+cloudengines,pogoplugv4|\
 linksys,viper|\
+raidsonic,ib-nas62x0|\
+seagate,dockstar|\
 zyxel,nsa310b|\
-zyxel,nsa325|\
-cloudengines,pogoe02|\
-cloudengines,pogoplugv4)
+zyxel,nsa325)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
 linksys,audi)

target/linux/kirkwood/base-files/etc/board.d/01_leds

@@ -10,9 +10,9 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-"seagate,dockstar")
-	ucidef_set_led_default "health" "health" "status:green:health" "1"
-	ucidef_set_led_default "fault" "fault" "status:orange:fault" "1"
+"cloudengines,pogoe02")
+	ucidef_set_led_default "health" "health" "pogo_e02:green:health" "1"
+	ucidef_set_led_default "fault" "fault" "pogo_e02:orange:fault" "1"
 	;;
 "linksys,audi")
 	ucidef_set_led_default "power" "power" "audi:green:power" "1"
@@ -21,18 +21,18 @@ case "$board" in
 	ucidef_set_led_default "health" "health" "viper:white:health" "1"
 	ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1"
 	;;
-"seagate,goflexhome" | \
-"seagate,goflexnet")
-	ucidef_set_led_default "health" "health" "status:green:health" "1"
-	ucidef_set_led_default "fault" "fault" "status:orange:fault" "0"
-	;;
 "raidsonic,ib-nas62x0")
 	ucidef_set_led_default "health" "health" "ib62x0:green:os" "1"
 	ucidef_set_led_default "fault" "fault" "ib62x0:red:os" "1"
 	;;
-"cloudengines,pogoe02")
-	ucidef_set_led_default "health" "health" "pogo_e02:green:health" "1"
-	ucidef_set_led_default "fault" "fault" "pogo_e02:orange:fault" "1"
+"seagate,dockstar")
+	ucidef_set_led_default "health" "health" "status:green:health" "1"
+	ucidef_set_led_default "fault" "fault" "status:orange:fault" "1"
+	;;
+"seagate,goflexhome"|\
+"seagate,goflexnet")
+	ucidef_set_led_default "health" "health" "status:green:health" "1"
+	ucidef_set_led_default "fault" "fault" "status:orange:fault" "0"
 	;;
 "zyxel,nsa310b")
 	ucidef_set_led_default "health" "health" "nsa310:green:sys" "1"
@@ -46,8 +46,6 @@ case "$board" in
 	ucidef_set_led_ataport "hdd1" "HDD1" "nsa325:green:sata1" "1"
 	ucidef_set_led_ataport "hdd2" "HDD2" "nsa325:green:sata2" "2"
 	;;
-*)
-	;;
 esac
 
 board_config_flush

target/linux/kirkwood/base-files/etc/board.d/02_network

@@ -11,13 +11,16 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+"cisco,on100")
+	ucidef_set_interface_lan "eth0 eth1"
+	;;
+"cloudengines,pogoe02"|\
+"cloudengines,pogoplugv4"|\
+"iom,iconnect-1.1"|\
+"raidsonic,ib-nas62x0"|\
 "seagate,dockstar"|\
 "seagate,goflexhome"|\
-"seagate,goflexnet"|\
-"raidsonic,ib-nas62x0"|\
-"iom,iconnect-1.1"|\
-"cloudengines,pogoe02"|\
-"cloudengines,pogoplugv4")
+"seagate,goflexnet")
 	ucidef_set_interface_lan "eth0" "dhcp"
 	;;
 "linksys,audi"|\
@@ -25,13 +28,11 @@ case "$board" in
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1"
 	;;
-"zyxel,nsa310b"|"zyxel,nsa325")
+"zyxel,nsa310b"|\
+"zyxel,nsa325")
 	ucidef_set_interface_lan "eth0" "dhcp"
 	ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr )
 	;;
-"cisco,on100")
-	ucidef_set_interface_lan "eth0 eth1"
-	;;
 *)
 	ucidef_set_interface_lan "eth0"
 	;;

target/linux/kirkwood/base-files/etc/diag.sh

@@ -6,10 +6,8 @@
 
 get_status_led() {
 	case $(board_name) in
-	seagate,dockstar|\
-	seagate,goflexhome|\
-	seagate,goflexnet)
-		status_led="status:orange:fault"
+	cisco,on100)
+		status_led="on100:green:health"
 		;;
 	cloudengines,pogoe02)
 		status_led="pogo_e02:orange:fault"
@@ -23,12 +21,14 @@ get_status_led() {
 	linksys,viper)
 		status_led="viper:white:health"
 		;;
+	seagate,dockstar|\
+	seagate,goflexhome|\
+	seagate,goflexnet)
+		status_led="status:orange:fault"
+		;;
 	zyxel,nsa310b)
 		status_led="nsa310:green:sys"
 		;;
-	cisco,on100)
-		status_led="on100:green:health"
-		;;
 	esac
 }
 

target/linux/kirkwood/image/Makefile

@@ -27,29 +27,40 @@ define Device/Default
   SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
 endef
 
-define Device/seagate_dockstar
-  DEVICE_DTS := kirkwood-dockstar
-  DEVICE_TITLE := Seagate FreeAgent Dockstar
-  BOARD_NAME := dockstar
-  SUPPORTED_DEVICES += dockstar
+define Device/cisco_on100
+  DEVICE_TITLE := Cisco Systems ON100
+  DEVICE_DTS := kirkwood-on100
+  DEVICE_PACKAGES := kmod-i2c-mv64xxx
+  KERNEL_SIZE := 5376k
+  KERNEL_IN_UBI := 0
+  UBINIZE_OPTS := -E 5
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+  BOARD_NAME := on100
 endef
-TARGET_DEVICES += seagate_dockstar
+TARGET_DEVICES += cisco_on100
 
-define Device/seagate_goflexnet
-  DEVICE_TITLE := Seagate GoFlexNet
-  DEVICE_DTS := kirkwood-goflexnet
-  BOARD_NAME := goflexnet
-  SUPPORTED_DEVICES += goflexnet
+define Device/cloudengines_pogoe02
+  DEVICE_TITLE := Cloud Engines Pogoplug E02
+  DEVICE_DTS := kirkwood-pogo_e02
+  BOARD_NAME := pogo_e02
+  SUPPORTED_DEVICES += pogo_e02
 endef
-TARGET_DEVICES += seagate_goflexnet
+TARGET_DEVICES += cloudengines_pogoe02
 
-define Device/seagate_goflexhome
-  DEVICE_TITLE := Seagate GoFlexHome
-  DEVICE_DTS := kirkwood-goflexhome
-  BOARD_NAME := goflexhome
-  SUPPORTED_DEVICES += goflexhome
+define Device/cloudengines_pogoplugv4
+  DEVICE_TITLE := Cloud Engines Pogoplug V4
+  DEVICE_DTS := kirkwood-pogoplug-series-4
+  DEVICE_PACKAGES := kmod-usb3
 endef
-TARGET_DEVICES += seagate_goflexhome
+TARGET_DEVICES += cloudengines_pogoplugv4
+
+define Device/iom_iconnect-1.1
+  DEVICE_TITLE := Iomega Iconnect
+  DEVICE_DTS := kirkwood-iconnect
+  BOARD_NAME := iconnect
+  SUPPORTED_DEVICES += iconnect
+endef
+TARGET_DEVICES += iom_iconnect-1.1
 
 define Device/linksys_audi
   DEVICE_TITLE := Linksys EA3500 (Audi)
@@ -77,13 +88,37 @@ define Device/linksys_viper
 endef
 TARGET_DEVICES += linksys_viper
 
-define Device/iom_iconnect-1.1
-  DEVICE_TITLE := Iomega Iconnect
-  DEVICE_DTS := kirkwood-iconnect
-  BOARD_NAME := iconnect
-  SUPPORTED_DEVICES += iconnect
+define Device/raidsonic_ib-nas62x0
+  DEVICE_TITLE := RaidSonic ICY BOX IB-NAS62x0
+  DEVICE_DTS := kirkwood-ib62x0
+  BOARD_NAME := ib62x0
+  SUPPORTED_DEVICES += ib62x0
 endef
-TARGET_DEVICES += iom_iconnect-1.1
+TARGET_DEVICES += raidsonic_ib-nas62x0
+
+define Device/seagate_dockstar
+  DEVICE_DTS := kirkwood-dockstar
+  DEVICE_TITLE := Seagate FreeAgent Dockstar
+  BOARD_NAME := dockstar
+  SUPPORTED_DEVICES += dockstar
+endef
+TARGET_DEVICES += seagate_dockstar
+
+define Device/seagate_goflexnet
+  DEVICE_TITLE := Seagate GoFlexNet
+  DEVICE_DTS := kirkwood-goflexnet
+  BOARD_NAME := goflexnet
+  SUPPORTED_DEVICES += goflexnet
+endef
+TARGET_DEVICES += seagate_goflexnet
+
+define Device/seagate_goflexhome
+  DEVICE_TITLE := Seagate GoFlexHome
+  DEVICE_DTS := kirkwood-goflexhome
+  BOARD_NAME := goflexhome
+  SUPPORTED_DEVICES += goflexhome
+endef
+TARGET_DEVICES += seagate_goflexhome
 
 define Device/zyxel_nsa310b
   DEVICE_TITLE := ZyXEL NSA310b
@@ -101,39 +136,4 @@ define Device/zyxel_nsa325
 endef
 TARGET_DEVICES += zyxel_nsa325
 
-define Device/cisco_on100
-  DEVICE_TITLE := Cisco Systems ON100
-  DEVICE_DTS := kirkwood-on100
-  DEVICE_PACKAGES := kmod-i2c-mv64xxx
-  KERNEL_SIZE := 5376k
-  KERNEL_IN_UBI := 0
-  UBINIZE_OPTS := -E 5
-  IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
-  BOARD_NAME := on100
-endef
-TARGET_DEVICES += cisco_on100
-
-define Device/cloudengines_pogoe02
-  DEVICE_TITLE := Cloud Engines Pogoplug E02
-  DEVICE_DTS := kirkwood-pogo_e02
-  BOARD_NAME := pogo_e02
-  SUPPORTED_DEVICES += pogo_e02
-endef
-TARGET_DEVICES += cloudengines_pogoe02
-
-define Device/cloudengines_pogoplugv4
-  DEVICE_TITLE := Cloud Engines Pogoplug V4
-  DEVICE_DTS := kirkwood-pogoplug-series-4
-  DEVICE_PACKAGES := kmod-usb3
-endef
-TARGET_DEVICES += cloudengines_pogoplugv4
-
-define Device/raidsonic_ib-nas62x0
-  DEVICE_TITLE := RaidSonic ICY BOX IB-NAS62x0
-  DEVICE_DTS := kirkwood-ib62x0
-  BOARD_NAME := ib62x0
-  SUPPORTED_DEVICES += ib62x0
-endef
-TARGET_DEVICES += raidsonic_ib-nas62x0
-
 $(eval $(call BuildImage))