ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x

SVN-Revision: 33318

target/linux/ar71xx/patches-3.3/136-MIPS-ath79-use-correct-fractional-dividers-for-CPU-D.patch

@@ -0,0 +1,49 @@
+From 7328ff547389ee0b455cbf98bdfc819731d9f7b9 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <[email protected]>
+Date: Fri, 31 Aug 2012 14:22:35 +0200
+Subject: [PATCH] MIPS: ath79: use correct fractional dividers for
+ {CPU,DDR}_PLL on AR934x
+
+The current dividers in the code are wrong and this
+leads to broken CPU frequency calculation on boards
+where the fractional part is used.
+
+For example, if the SoC is running from a 40MHz
+reference clock, refdiv=1, nint=14, outdiv=0 and
+nfrac=31 the real frequency is 579.375MHz but the
+current code calculates 569.687MHz instead.
+
+Because the system time is indirectly related to
+the CPU frequency the broken computation causes
+drift in the system time.
+
+The correct divider is 2^6 for the CPU PLL and 2^10
+for the DDR PLL. Use the correct values to fix the
+issue.
+
+Cc: <[email protected]>  [3.5+]
+Signed-off-by: Gabor Juhos <[email protected]>
+---
+ arch/mips/ath79/clock.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -189,7 +189,7 @@ static void __init ar934x_clocks_init(vo
+ 	       AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+ 
+ 	cpu_pll = nint * ath79_ref_clk.rate / ref_div;
+-	cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
++	cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
+ 	cpu_pll /= (1 << out_div);
+ 
+ 	pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+@@ -203,7 +203,7 @@ static void __init ar934x_clocks_init(vo
+ 	       AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+ 
+ 	ddr_pll = nint * ath79_ref_clk.rate / ref_div;
+-	ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
++	ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
+ 	ddr_pll /= (1 << out_div);
+ 
+ 	clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);