realtek: refactor net rx interrupt handler rtl83xx_net_irq()

Cleanup the code of the RTL83xx packet receive interrupt handler. Not
only for better readability but to avoid inconsistencies and stalls on
the RTL839x targets.

The current implementation seems to come from the GPL source code.
Calling the existing cleanup() function inside the interrupt context
without any locks conflicts with SMP & NAPI polling and makes things
worse instead of giving any benefit. Simply ignore RX buffer overruns
and let the device handle packet dropping itself.

Signed-off-by: Markus Stockhausen <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/18855
Signed-off-by: Robert Marko <[email protected]>
(cherry picked from commit 8dde1e463884b3ac84d7ba9ca7ce557c4f6e117d)
Link: https://github.com/openwrt/openwrt/pull/18755
Signed-off-by: Hauke Mehrtens <[email protected]>

target/linux/realtek/files-6.6/drivers/net/ethernet/rtl838x_eth.c

@@ -433,23 +433,19 @@ static void rtl839x_l2_notification_handler(struct rtl838x_eth_priv *priv)
 
 static irqreturn_t rtl83xx_net_irq(int irq, void *dev_id)
 {
-	struct net_device *dev = dev_id;
-	struct rtl838x_eth_priv *priv = netdev_priv(dev);
+	struct net_device *ndev = dev_id;
+	struct rtl838x_eth_priv *priv = netdev_priv(ndev);
 	u32 status = sw_r32(priv->r->dma_if_intr_sts);
 
-	pr_debug("IRQ: %08x\n", status);
+	netdev_dbg(ndev, "RX IRQ received: %08x\n", status);
 
-	/*  Ignore TX interrupt */
-	if ((status & 0xf0000)) {
-		/* Clear ISR */
-		sw_w32(0x000f0000, priv->r->dma_if_intr_sts);
-	}
+	if ((status & RTL83XX_DMA_IF_INTR_STS_RX_RUN_OUT_MASK) && net_ratelimit())
+		netdev_warn(ndev, "RX buffer overrun: status 0x%x, mask: 0x%x\n",
+			   status, sw_r32(priv->r->dma_if_intr_msk));
 
-	/* RX interrupt */
-	if (status & 0x0ff00) {
-		/* ACK and disable RX interrupt for this ring */
+	if (status & RTL83XX_DMA_IF_INTR_STS_RX_DONE_MASK) {
+		/* Disable rx interrupts */
 		sw_w32_mask(0xff00 & status, 0, priv->r->dma_if_intr_msk);
-		sw_w32(0x0000ff00 & status, priv->r->dma_if_intr_sts);
 		for (int i = 0; i < priv->rxrings; i++) {
 			if (status & BIT(i + 8)) {
 				pr_debug("Scheduling queue: %d\n", i);
@@ -458,28 +454,11 @@ static irqreturn_t rtl83xx_net_irq(int irq, void *dev_id)
 		}
 	}
 
-	/* RX buffer overrun */
-	if (status & 0x000ff) {
-		pr_debug("RX buffer overrun: status %x, mask: %x\n",
-			 status, sw_r32(priv->r->dma_if_intr_msk));
-		sw_w32(status, priv->r->dma_if_intr_sts);
-		rtl838x_rb_cleanup(priv, status & 0xff);
-	}
-
-	if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00100000) {
-		sw_w32(0x00100000, priv->r->dma_if_intr_sts);
-		rtl839x_l2_notification_handler(priv);
-	}
-
-	if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00200000) {
-		sw_w32(0x00200000, priv->r->dma_if_intr_sts);
+	if ((status & RTL83XX_DMA_IF_INTR_STS_NOTIFY_MASK) && priv->family_id == RTL8390_FAMILY_ID)
 		rtl839x_l2_notification_handler(priv);
-	}
 
-	if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00400000) {
-		sw_w32(0x00400000, priv->r->dma_if_intr_sts);
-		rtl839x_l2_notification_handler(priv);
-	}
+	/* Acknowledge all interrupts */
+	sw_w32(status, priv->r->dma_if_intr_sts);
 
 	return IRQ_HANDLED;
 }

target/linux/realtek/files-6.6/drivers/net/ethernet/rtl838x_eth.h

@@ -48,6 +48,10 @@
 #define RTL930X_MAC_FORCE_MODE_CTRL		(0xCA1C)
 #define RTL931X_MAC_FORCE_MODE_CTRL		(0x0ddc)
 
+#define RTL83XX_DMA_IF_INTR_STS_NOTIFY_MASK	GENMASK(22, 20)
+#define RTL83XX_DMA_IF_INTR_STS_RX_DONE_MASK	GENMASK(15, 8)
+#define RTL83XX_DMA_IF_INTR_STS_RX_RUN_OUT_MASK	GENMASK(7, 0)
+
 /* MAC address settings */
 #define RTL838X_MAC				(0xa9ec)
 #define RTL839X_MAC				(0x02b4)