ath79: enable PCI for whole target

This commit adds PCI support for the whole ath79 target. Previously,
this was only done in the generic and tiny subtargets.

With the introduction of the HiveAP-121, PCI will be a requirement for
all subtargets, thus moving PCI support to the target configuration.

Signed-off-by: David Bauer <[email protected]>

target/linux/ath79/config-4.14

@@ -27,6 +27,7 @@ CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ATH79=y
 CONFIG_ATH79_WDT=y
+CONFIG_BLK_MQ_PCI=y
 CONFIG_CEVT_R4K=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLONE_BACKWARDS=y
@@ -179,12 +180,20 @@ CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 # CONFIG_NO_IOPORT_MAP is not set
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_MDIO=y
 CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PCI=y
+CONFIG_PCI_AR71XX=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_DRIVERS_LEGACY=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2

target/linux/ath79/config-4.19

@@ -20,6 +20,7 @@ CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ATH79=y
 CONFIG_ATH79_WDT=y
+CONFIG_BLK_MQ_PCI=y
 CONFIG_CEVT_R4K=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLONE_BACKWARDS=y
@@ -178,6 +179,7 @@ CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 CONFIG_NVMEM=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y
@@ -185,6 +187,13 @@ CONFIG_OF_IRQ=y
 CONFIG_OF_KOBJ=y
 CONFIG_OF_MDIO=y
 CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PCI=y
+CONFIG_PCI_AR71XX=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_DRIVERS_LEGACY=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2

target/linux/ath79/generic/config-default

@@ -1,5 +1,4 @@
 CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 CONFIG_INTEL_XWAY_PHY=y
@@ -10,14 +9,6 @@ CONFIG_MICREL_PHY=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
 CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_AR71XX=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
 CONFIG_PHY_AR7100_USB=y
 CONFIG_PHY_AR7200_USB=y
 CONFIG_REGULATOR=y

target/linux/ath79/tiny/config-default

@@ -1,17 +1,8 @@
-CONFIG_BLK_MQ_PCI=y
 CONFIG_LEDS_RESET=y
 CONFIG_NET_DSA=y
 CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_TAG_TRAILER=y
 CONFIG_NET_SWITCHDEV=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_AR71XX=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
 CONFIG_PHY_AR7100_USB=y
 CONFIG_PHY_AR7200_USB=y
 CONFIG_REGULATOR=y