kernel: bump 4.14 to 4.14.118

Refreshed all patches.

Remove upstreamed:
- 060-v5.1-serial-ar933x_uart-Fix-build-failure-with-disabled-c.patch

Altered:
- 143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <[email protected]>

include/kernel-version.mk

@@ -7,11 +7,11 @@ ifdef CONFIG_TESTING_KERNEL
 endif
 
 LINUX_VERSION-4.9 = .175
-LINUX_VERSION-4.14 = .115
+LINUX_VERSION-4.14 = .118
 LINUX_VERSION-4.19 = .38
 
 LINUX_KERNEL_HASH-4.9.175 = d98434f91f9df2bf36c7896ca747b7cf98be2e3a491073fd26e3f53cda07500c
-LINUX_KERNEL_HASH-4.14.115 = b7ae61711a1323053d68fd47911b92977afd526d302755518e42744251516186
+LINUX_KERNEL_HASH-4.14.118 = 687d73abd4b9af66ec30bdccdf96193e04316f9f5a1c7b8d74732c10b4729a15
 LINUX_KERNEL_HASH-4.19.38 = 6a3fdfa02dbc61ee8120ff0947a6eb0d6595b9bbe27e30a1b6f53b905f0bcd7f
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

target/linux/apm821xx/patches-4.14/140-GPIO-add-named-gpio-exports.patch

@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  #include "gpiolib.h"
  
-@@ -507,3 +509,72 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -513,3 +515,72 @@ void of_gpiochip_remove(struct gpio_chip
  	gpiochip_remove_pin_ranges(chip);
  	of_node_put(chip->of_node);
  }

target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch

@@ -12,7 +12,7 @@
  # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
 --- a/lib/Makefile
 +++ b/lib/Makefile
-@@ -134,6 +134,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
+@@ -135,6 +135,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
  obj-$(CONFIG_RAID6_PQ) += raid6/
  obj-$(CONFIG_LZMA_COMPRESS) += lzma/
  obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/

target/linux/ath79/patches-4.14/0036-GPIO-add-named-gpio-exports.patch

@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  #include "gpiolib.h"
  
-@@ -507,3 +509,68 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -513,3 +515,68 @@ void of_gpiochip_remove(struct gpio_chip
  	gpiochip_remove_pin_ranges(chip);
  	of_node_put(chip->of_node);
  }

target/linux/brcm2708/patches-4.14/950-0037-Add-dwc_otg-driver.patch

@@ -852,7 +852,7 @@ Signed-off-by: Malik Olivier Boussejra <[email protected]>
  		msleep(100);	/* Cool down */
 --- a/drivers/usb/core/message.c
 +++ b/drivers/usb/core/message.c
-@@ -1923,6 +1923,85 @@ free_interfaces:
+@@ -1925,6 +1925,85 @@ free_interfaces:
  	if (cp->string == NULL &&
  			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
  		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);

target/linux/brcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch

@@ -68,18 +68,25 @@ Signed-off-by: Jonas Gorski <[email protected]>
  			ret = gpiod_hog(desc, name, lflags, dflags);
  			if (ret < 0) {
  				of_node_put(np);
-@@ -499,7 +506,10 @@ int of_gpiochip_add(struct gpio_chip *ch
+@@ -499,12 +506,13 @@ int of_gpiochip_add(struct gpio_chip *ch
  
  	of_node_get(chip->of_node);
  
--	return of_gpiochip_scan_gpios(chip);
-+	if (!chip->request)
-+		status = of_gpiochip_scan_gpios(chip, 0, chip->ngpio);
-+
-+	return status;
+-	status = of_gpiochip_scan_gpios(chip);
+-	if (status) {
+-		of_node_put(chip->of_node);
+-		gpiochip_remove_pin_ranges(chip);
++	if (!chip->request) {
++		status = of_gpiochip_scan_gpios(chip);
++		if (status) {
++			of_node_put(chip->of_node);
++			gpiochip_remove_pin_ranges(chip);
++		}
+ 	}
+-
+ 	return status;
  }
  
- void of_gpiochip_remove(struct gpio_chip *chip)
 --- a/drivers/gpio/gpiolib.c
 +++ b/drivers/gpio/gpiolib.c
 @@ -1938,7 +1938,8 @@ int gpiochip_add_pingroup_range(struct g

target/linux/generic/backport-4.14/060-v5.1-serial-ar933x_uart-Fix-build-failure-with-disabled-c.patch

@@ -1,94 +0,0 @@
-From 72ff51d8dd262d1fef25baedc2ac35116435be47 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <[email protected]>
-Date: Wed, 6 Mar 2019 17:54:03 +0100
-Subject: [PATCH] serial: ar933x_uart: Fix build failure with disabled console
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Andrey has reported on OpenWrt's bug tracking system[1], that he
-currently can't use ar93xx_uart as pure serial UART without console
-(CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined),
-because compilation ends with following error:
-
- ar933x_uart.c: In function 'ar933x_uart_console_write':
- ar933x_uart.c:550:14: error: 'struct uart_port' has no
-                               member named 'sysrq'
-
-So this patch moves all the code related to console handling behind
-series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs.
-
-1. https://bugs.openwrt.org/index.php?do=details&task_id=2152
-
-Cc: Greg Kroah-Hartman <[email protected]>
-Cc: Jiri Slaby <[email protected]>
-Cc: Andrey Batyiev <[email protected]>
-Reported-by: Andrey Batyiev <[email protected]>
-Tested-by: Andrey Batyiev <[email protected]>
-Signed-off-by: Petr Štetiar <[email protected]>
-Signed-off-by: Greg Kroah-Hartman <[email protected]>
----
- drivers/tty/serial/ar933x_uart.c | 24 ++++++++----------------
- 1 file changed, 8 insertions(+), 16 deletions(-)
-
---- a/drivers/tty/serial/ar933x_uart.c
-+++ b/drivers/tty/serial/ar933x_uart.c
-@@ -52,11 +52,6 @@ struct ar933x_uart_port {
- 	struct clk		*clk;
- };
- 
--static inline bool ar933x_uart_console_enabled(void)
--{
--	return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE);
--}
--
- static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
- 					    int offset)
- {
-@@ -511,6 +506,7 @@ static const struct uart_ops ar933x_uart
- 	.verify_port	= ar933x_uart_verify_port,
- };
- 
-+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
- static struct ar933x_uart_port *
- ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
- 
-@@ -607,14 +603,7 @@ static struct console ar933x_uart_consol
- 	.index		= -1,
- 	.data		= &ar933x_uart_driver,
- };
--
--static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
--{
--	if (!ar933x_uart_console_enabled())
--		return;
--
--	ar933x_console_ports[up->port.line] = up;
--}
-+#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
- 
- static struct uart_driver ar933x_uart_driver = {
- 	.owner		= THIS_MODULE,
-@@ -703,7 +692,9 @@ static int ar933x_uart_probe(struct plat
- 	baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
- 	up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
- 
--	ar933x_uart_add_console_port(up);
-+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
-+	ar933x_console_ports[up->port.line] = up;
-+#endif
- 
- 	ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
- 	if (ret)
-@@ -752,8 +743,9 @@ static int __init ar933x_uart_init(void)
- {
- 	int ret;
- 
--	if (ar933x_uart_console_enabled())
--		ar933x_uart_driver.cons = &ar933x_uart_console;
-+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
-+	ar933x_uart_driver.cons = &ar933x_uart_console;
-+#endif
- 
- 	ret = uart_register_driver(&ar933x_uart_driver);
- 	if (ret)

target/linux/generic/backport-4.14/293-v4.16-netfilter-reduce-size-of-hook-entry-point-locations.patch

@@ -92,7 +92,7 @@ Signed-off-by: Pablo Neira Ayuso <[email protected]>
  #endif
 --- a/net/bridge/br_netfilter_hooks.c
 +++ b/net/bridge/br_netfilter_hooks.c
-@@ -987,7 +987,7 @@ int br_nf_hook_thresh(unsigned int hook,
+@@ -988,7 +988,7 @@ int br_nf_hook_thresh(unsigned int hook,
  	unsigned int i;
  	int ret;
  

target/linux/generic/pending-4.14/530-jffs2_make_lzma_available.patch

@@ -244,7 +244,7 @@ Signed-off-by: Alexandros C. Couloumbis <[email protected]>
 +}
 --- a/fs/jffs2/super.c
 +++ b/fs/jffs2/super.c
-@@ -371,14 +371,41 @@ static int __init init_jffs2_fs(void)
+@@ -374,14 +374,41 @@ static int __init init_jffs2_fs(void)
  	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
  	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
  
@@ -1119,7 +1119,7 @@ Signed-off-by: Alexandros C. Couloumbis <[email protected]>
  ifdef CONFIG_FUNCTION_TRACER
  ORIG_CFLAGS := $(KBUILD_CFLAGS)
  KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
-@@ -122,6 +132,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
+@@ -123,6 +133,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
  obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
  obj-$(CONFIG_XZ_DEC) += xz/
  obj-$(CONFIG_RAID6_PQ) += raid6/

target/linux/generic/pending-4.14/630-packet_socket_type.patch

@@ -87,7 +87,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!net_eq(dev_net(dev), sock_net(sk)))
  		goto drop;
  
-@@ -3269,6 +3271,7 @@ static int packet_create(struct net *net
+@@ -3273,6 +3275,7 @@ static int packet_create(struct net *net
  	mutex_init(&po->pg_vec_lock);
  	po->rollover = NULL;
  	po->prot_hook.func = packet_rcv;
@@ -95,7 +95,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	if (sock->type == SOCK_PACKET)
  		po->prot_hook.func = packet_rcv_spkt;
-@@ -3882,6 +3885,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3886,6 +3889,16 @@ packet_setsockopt(struct socket *sock, i
  		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
  		return 0;
  	}
@@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	default:
  		return -ENOPROTOOPT;
  	}
-@@ -3934,6 +3947,13 @@ static int packet_getsockopt(struct sock
+@@ -3938,6 +3951,13 @@ static int packet_getsockopt(struct sock
  	case PACKET_VNET_HDR:
  		val = po->has_vnet_hdr;
  		break;

target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch

@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  #include "gpiolib.h"
  
-@@ -507,3 +509,72 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -513,3 +515,72 @@ void of_gpiochip_remove(struct gpio_chip
  	gpiochip_remove_pin_ranges(chip);
  	of_node_put(chip->of_node);
  }

target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch

@@ -1485,7 +1485,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
  #define BCSR5_INT_USB			(0x02)
 --- a/include/linux/usb.h
 +++ b/include/linux/usb.h
-@@ -434,6 +434,7 @@ struct usb_bus {
+@@ -432,6 +432,7 @@ struct usb_bus {
  					 * for control transfers?
  					 */
  	u8 otg_port;			/* 0, or number of OTG/HNP port */

target/linux/ramips/patches-4.14/0024-GPIO-add-named-gpio-exports.patch

@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  #include "gpiolib.h"
  
-@@ -507,3 +509,68 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -513,3 +515,68 @@ void of_gpiochip_remove(struct gpio_chip
  	gpiochip_remove_pin_ranges(chip);
  	of_node_put(chip->of_node);
  }