ipq807x: 6.1: fix remoteproc booting

In 6.1 booting the remoteprocessor that is actually running the WLAN
unfortunatelly broke, so after a long time bisecting we managed to track it
down to commit ("soc: qcom: mdt_loader: Always invoke PAS mem_setup").

Luckily adding back the relocation check and not making an SCM call
qcom_scm_pas_mem_setup() restored the functionality.

Ansuel has sent the patch upstream.

Signed-off-by: Robert Marko <[email protected]>

target/linux/ipq807x/patches-6.1/0131-soc-qcom-mdt_loader-Fix-unconditional-call-to-scm_pa.patch

@@ -0,0 +1,77 @@
+From b8295c6eb276b60f7b75c53a9703ca8fee01eba2 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <[email protected]>
+Date: Fri, 26 May 2023 13:09:17 +0200
+Subject: [PATCH] soc: qcom: mdt_loader: Fix unconditional call to
+ scm_pas_mem_setup
+
+Commit ebeb20a9cd3f ("soc: qcom: mdt_loader: Always invoke PAS
+mem_setup") dropped the relocate check and made pas_mem_setup run
+unconditionally. The code was later moved with commit f4e526ff7e38
+("soc: qcom: mdt_loader: Extract PAS operations") to
+qcom_mdt_pas_init() effectively losing track of what was actually
+done.
+
+The assumption that PAS mem_setup can be done anytime was effectively
+wrong, with no good reason and this caused regression on some SoC
+that use remoteproc to bringup ath11k. One example is IPQ8074 SoC that
+effectively broke resulting in remoteproc silently die and ath11k not
+working.
+
+On this SoC FW relocate is not enabled and PAS mem_setup was correctly
+skipped in previous kernel version resulting in correct bringup and
+function of remoteproc and ath11k.
+
+To fix the regression, reintroduce the relocate check in
+qcom_mdt_pas_init() and correctly skip PAS mem_setup where relocate is
+not enabled.
+
+Fixes: ebeb20a9cd3f ("soc: qcom: mdt_loader: Always invoke PAS mem_setup")
+Reported-by: Robert Marko <[email protected]>
+Tested-by: Robert Marko <[email protected]>
+Co-developed-by: Robert Marko <[email protected]>
+Signed-off-by: Robert Marko <[email protected]>
+Signed-off-by: Christian Marangi <[email protected]>
+Cc: [email protected]
+---
+ drivers/soc/qcom/mdt_loader.c | 16 +++++++++++-----
+ 1 file changed, 11 insertions(+), 5 deletions(-)
+
+--- a/drivers/soc/qcom/mdt_loader.c
++++ b/drivers/soc/qcom/mdt_loader.c
+@@ -210,6 +210,7 @@ int qcom_mdt_pas_init(struct device *dev
+ 	const struct elf32_hdr *ehdr;
+ 	phys_addr_t min_addr = PHYS_ADDR_MAX;
+ 	phys_addr_t max_addr = 0;
++	bool relocate = false;
+ 	size_t metadata_len;
+ 	void *metadata;
+ 	int ret;
+@@ -224,6 +225,9 @@ int qcom_mdt_pas_init(struct device *dev
+ 		if (!mdt_phdr_valid(phdr))
+ 			continue;
+ 
++		if (phdr->p_flags & QCOM_MDT_RELOCATABLE)
++			relocate = true;
++
+ 		if (phdr->p_paddr < min_addr)
+ 			min_addr = phdr->p_paddr;
+ 
+@@ -246,11 +250,13 @@ int qcom_mdt_pas_init(struct device *dev
+ 		goto out;
+ 	}
+ 
+-	ret = qcom_scm_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr);
+-	if (ret) {
+-		/* Unable to set up relocation */
+-		dev_err(dev, "error %d setting up firmware %s\n", ret, fw_name);
+-		goto out;
++	if (relocate) {
++		ret = qcom_scm_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr);
++		if (ret) {
++			/* Unable to set up relocation */
++			dev_err(dev, "error %d setting up firmware %s\n", ret, fw_name);
++			goto out;
++		}
+ 	}
+ 
+ out: