rockchip: set network IRQ affinity to fast CPU cores

The nanopi R6S, R6C and nanopc T6 platforms are based on rk3588(s) SoC,
which has fast and slow CPU cores. Set up network interrupt affinity to be
on the fast CPU cores by default. This is similar to the way this was
already configured on nanopi R4S.

Signed-off-by: Michel Lespinasse <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/17638
(cherry picked from commit 59215154a0eba77f0a79a6e30069a3037603ebf2)
Link: https://github.com/openwrt/openwrt/pull/18347
Signed-off-by: Hauke Mehrtens <[email protected]>

target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity

@@ -30,10 +30,8 @@ set_interface_core() {
 
 case "$(board_name)" in
 armsom,sige7|\
-friendlyarm,nanopc-t6|\
 friendlyarm,nanopi-r3s|\
 friendlyarm,nanopi-r5c|\
-friendlyarm,nanopi-r6c|\
 radxa,e25|\
 sinovoip,rk3568-bpi-r2pro)
 	set_interface_core 2 "eth0"
@@ -49,15 +47,21 @@ xunlong,orangepi-r1-plus-lts)
 	set_interface_core 4 "eth1" "xhci-hcd:usb[0-9]+"
 	;;
 friendlyarm,nanopi-r4s|\
-friendlyarm,nanopi-r4s-enterprise)
+friendlyarm,nanopi-r4s-enterprise|\
+friendlyarm,nanopi-r6c|\
+friendlyarm,nanopc-t6)
 	set_interface_core 10 "eth0"
 	set_interface_core 20 "eth1"
 	;;
-friendlyarm,nanopi-r5s|\
-friendlyarm,nanopi-r6s)
+friendlyarm,nanopi-r5s)
 	set_interface_core 2 "eth0"
 	set_interface_core 4 "eth1"
 	set_interface_core 8 "eth2"
 	;;
+friendlyarm,nanopi-r6s)
+	set_interface_core 10 "eth0"
+	set_interface_core 20 "eth1"
+	set_interface_core 40 "eth2"
+	;;
 esac