add support for Allnet ALL5002 to kernel

support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <[email protected]>

SVN-Revision: 32813

target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

@@ -58,6 +58,9 @@ enum ramips_mach_type {
 	RAMIPS_MACH_WR6202,		/* Accton WR6202 */
 	RAMIPS_MACH_XDXRN502J,          /* unknown XDX-RN502J */
 	RAMIPS_MACH_UR_336UN,		/* UPVEL ROUTER */
+	
+	/* RT3352 based machines */
+	RAMIPS_MACH_ALL5002,		/* Allnet ALL5002 */
 
 	/* RT3662 based machines */
 	RAMIPS_MACH_RT_N56U,		/* Asus RT-N56U */

target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

@@ -16,6 +16,11 @@ config RT305X_MACH_ALL0256N
 	bool "Allnet ALL0256N support"
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
+	
+config RT305X_MACH_ALL5002
+	bool "Allnet ALL5002 support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_W502U
 	bool "ALFA Networks W502U board support"

target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_RT305X_MACH_3G_6200N)	+= mach-3g-6200n.o
 obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B)	+= mach-argus-atp52b.o
 obj-$(CONFIG_RT305X_MACH_BC2)		+= mach-bc2.o
 obj-$(CONFIG_RT305X_MACH_ALL0256N)	+= mach-all0256n.o
+obj-$(CONFIG_RT305X_MACH_ALL5002)	+= mach-all5002.o
 obj-$(CONFIG_RT305X_MACH_DIR_300_REVB)	+= mach-dir-300-revb.o
 obj-$(CONFIG_RT305X_MACH_ESR_9753)	+= mach-esr-9753.o
 obj-$(CONFIG_RT305X_MACH_F5D8235_V2)    += mach-f5d8235-v2.o

target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c

@@ -0,0 +1,61 @@
+/*
+ *  Allnet ALL5002
+ *
+ *  Copyright (C) 2012 Daniel Golle <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+// #define ALL5002_GPIO_BUTTON_RESET 0
+// #define ALL5002_GPIO_LED_RSSI_LOW 14
+// #define ALL5002_GPIO_LED_RSSI_MED 12
+// #define ALL5002_GPIO_LED_RSSI_HIGH 13
+// #define ALL5002_BUTTONS_POLL_INTERVAL 20
+
+const struct flash_platform_data all5002_flash = {
+	.type		= "mx25l25635e",
+};
+
+struct spi_board_info all5002_spi_slave_info[] __initdata = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &all5002_flash,
+		.irq		= -1,
+		.max_speed_hz	= 10000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static void __init all5002_init(void)
+{
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+	rt305x_register_spi(all5002_spi_slave_info,
+			    ARRAY_SIZE(all5002_spi_slave_info));
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+	rt305x_register_ethernet();
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+	rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_ALL5002, "ALL5002", "Allnet ALL5002",
+	     all5002_init);

target/linux/ramips/rt305x/config-3.3

@@ -89,6 +89,7 @@ CONFIG_RALINK_RT305X=y
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT305X_MACH_3G_6200N=y
 CONFIG_RT305X_MACH_ALL0256N=y
+CONFIG_RT305X_MACH_ALL5002=y
 CONFIG_RT305X_MACH_ARGUS_ATP52B=y
 CONFIG_RT305X_MACH_BC2=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y