kernel: update kernel 4.4 to version 4.4.13

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

include/kernel-version.mk

@@ -4,11 +4,11 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .29
 LINUX_VERSION-4.1 = .20
-LINUX_VERSION-4.4 = .12
+LINUX_VERSION-4.4 = .13
 
 LINUX_KERNEL_MD5SUM-3.18.29 = b25737a0bc98e80d12200de93f239c28
 LINUX_KERNEL_MD5SUM-4.1.20 = 075c38a3a23ca5bc80437b13606df00a
-LINUX_KERNEL_MD5SUM-4.4.12 = eed37d7fa5c2095f42f62803fa077c33
+LINUX_KERNEL_MD5SUM-4.4.13 = d70b6959d8db61bcea7070c089aace9b
 
 ifdef KERNEL_PATCHVER
   LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))

target/linux/ar71xx/patches-4.4/003-MIPS-ath79-make-bootconsole-wait-for-both-THRE-and-T.patch

@@ -1,49 +0,0 @@
-From f1ba020af5076172c9d29006a747ccf40027fedc Mon Sep 17 00:00:00 2001
-Message-Id: <f1ba020af5076172c9d29006a747ccf40027fedc.1458840219.git.mschiffer@universe-factory.net>
-From: Matthias Schiffer <[email protected]>
-Date: Thu, 24 Mar 2016 15:34:05 +0100
-Subject: [PATCH] MIPS: ath79: make bootconsole wait for both THRE and TEMT
-
-This makes the ath79 bootconsole behave the same way as the generic 8250
-bootconsole.
-
-Also waiting for TEMT (transmit buffer is empty) instead of just THRE
-(transmit buffer is not full) ensures that all characters have been
-transmitted before the real serial driver starts reconfiguring the serial
-controller (which would sometimes result in garbage being transmitted.)
-This change does not cause a visible performance loss.
-
-In addition, this seems to fix a hang observed in certain configurations on
-many AR7xxx/AR9xxx SoCs during autoconfig of the real serial driver.
-
-A more complete follow-up patch will disable 8250 autoconfig for ath79
-altogether (the serial controller is detected as a 16550A, which is not
-fully compatible with the ath79 serial, and the autoconfig may lead to
-undefined behavior on ath79.)
-
-Cc: <[email protected]>
-Signed-off-by: Matthias Schiffer <[email protected]>
----
- arch/mips/ath79/early_printk.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -31,13 +31,15 @@ static inline void prom_putchar_wait(voi
- 	} while (1);
- }
- 
-+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-+
- static void prom_putchar_ar71xx(unsigned char ch)
- {
- 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
- 
--	prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
-+	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
- 	__raw_writel(ch, base + UART_TX * 4);
--	prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
-+	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
- }
- 
- static void prom_putchar_ar933x(unsigned char ch)

target/linux/ath25/patches-4.4/210-reset_button.patch

@@ -1,7 +1,7 @@
 --- a/arch/mips/ath25/Makefile
 +++ b/arch/mips/ath25/Makefile
 @@ -8,7 +8,7 @@
- # Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
+ # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
  #
  
 -obj-y += board.o prom.o devices.o

target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch

@@ -17,7 +17,7 @@ Signed-off-by: Michael Turquette <[email protected]>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1154,22 +1154,24 @@ static int bcm2835_clock_is_on(struct cl
+@@ -1164,22 +1164,24 @@ static int bcm2835_clock_is_on(struct cl
  
  static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
  				    unsigned long rate,
@@ -48,9 +48,9 @@ Signed-off-by: Michael Turquette <[email protected]>
 +		div += unused_frac_mask + 1;
 +	div &= ~unused_frac_mask;
  
- 	/* Clamp to the limits. */
- 	div = max(div, unused_frac_mask + 1);
-@@ -1208,7 +1210,7 @@ static long bcm2835_clock_round_rate(str
+ 	/* clamp to min divider of 1 */
+ 	div = max_t(u32, div, 1 << CM_DIV_FRAC_BITS);
+@@ -1219,7 +1221,7 @@ static long bcm2835_clock_round_rate(str
  				     unsigned long *parent_rate)
  {
  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
@@ -59,7 +59,7 @@ Signed-off-by: Michael Turquette <[email protected]>
  
  	return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div);
  }
-@@ -1277,7 +1279,7 @@ static int bcm2835_clock_set_rate(struct
+@@ -1288,7 +1290,7 @@ static int bcm2835_clock_set_rate(struct
  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
  	struct bcm2835_cprman *cprman = clock->cprman;
  	const struct bcm2835_clock_data *data = clock->data;

target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch

@@ -24,7 +24,7 @@ Signed-off-by: Michael Turquette <[email protected]>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1205,16 +1205,6 @@ static long bcm2835_clock_rate_from_divi
+@@ -1216,16 +1216,6 @@ static long bcm2835_clock_rate_from_divi
  	return temp;
  }
  
@@ -41,7 +41,7 @@ Signed-off-by: Michael Turquette <[email protected]>
  static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
  					    unsigned long parent_rate)
  {
-@@ -1286,13 +1276,75 @@ static int bcm2835_clock_set_rate(struct
+@@ -1297,13 +1287,75 @@ static int bcm2835_clock_set_rate(struct
  	return 0;
  }
  
@@ -118,7 +118,7 @@ Signed-off-by: Michael Turquette <[email protected]>
  };
  
  static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
-@@ -1308,7 +1360,9 @@ static const struct clk_ops bcm2835_vpu_
+@@ -1319,7 +1371,9 @@ static const struct clk_ops bcm2835_vpu_
  	.is_prepared = bcm2835_vpu_clock_is_on,
  	.recalc_rate = bcm2835_clock_get_rate,
  	.set_rate = bcm2835_clock_set_rate,
@@ -129,7 +129,7 @@ Signed-off-by: Michael Turquette <[email protected]>
  };
  
  static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman,
-@@ -1402,45 +1456,23 @@ static struct clk *bcm2835_register_cloc
+@@ -1413,45 +1467,23 @@ static struct clk *bcm2835_register_cloc
  {
  	struct bcm2835_clock *clock;
  	struct clk_init_data init;

target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch

@@ -33,7 +33,7 @@ Signed-off-by: Michael Turquette <[email protected]>
  struct bcm2835_pll {
  	struct clk_hw hw;
  	struct bcm2835_cprman *cprman;
-@@ -1590,6 +1600,9 @@ static int bcm2835_clk_probe(struct plat
+@@ -1601,6 +1611,9 @@ static int bcm2835_clk_probe(struct plat
  				  cprman->regs + CM_PERIICTL, CM_GATE_BIT,
  				  0, &cprman->regs_lock);
  

target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-pll_off-should-only-update-CM_PLL_ANARST.patch

@@ -1,43 +0,0 @@
-From 4d4b769727386c6a1b7274e3083cc6b24364b4fa Mon Sep 17 00:00:00 2001
-From: Martin Sperl <[email protected]>
-Date: Mon, 29 Feb 2016 11:39:17 +0000
-Subject: [PATCH 256/381] clk: bcm2835: pll_off should only update
- CM_PLL_ANARST
-
-bcm2835_pll_off is currently assigning CM_PLL_ANARST to the control
-register, which may lose the other bits that are currently set by the
-clock dividers.
-
-It also now locks during the read/modify/write cycle of both
-registers.
-
-Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the
-audio domain clocks")
-
-Signed-off-by: Martin Sperl <[email protected]>
-Signed-off-by: Eric Anholt <[email protected]>
-Reviewed-by: Eric Anholt <[email protected]>
-(cherry picked from commit 6727f086cfe4ddcc651eb2bf4301abfcf619be06)
----
- drivers/clk/bcm/clk-bcm2835.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -913,8 +913,14 @@ static void bcm2835_pll_off(struct clk_h
- 	struct bcm2835_cprman *cprman = pll->cprman;
- 	const struct bcm2835_pll_data *data = pll->data;
- 
--	cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
--	cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN);
-+	spin_lock(&cprman->regs_lock);
-+	cprman_write(cprman, data->cm_ctrl_reg,
-+		     cprman_read(cprman, data->cm_ctrl_reg) |
-+		     CM_PLL_ANARST);
-+	cprman_write(cprman, data->a2w_ctrl_reg,
-+		     cprman_read(cprman, data->a2w_ctrl_reg) |
-+		     A2W_PLL_CTRL_PWRDN);
-+	spin_unlock(&cprman->regs_lock);
- }
- 
- static int bcm2835_pll_on(struct clk_hw *hw)

target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-divider-value-has-to-be-1-or-more.patch

@@ -1,36 +0,0 @@
-From 260572944700ab13fa3f7a68a387556220cef277 Mon Sep 17 00:00:00 2001
-From: Martin Sperl <[email protected]>
-Date: Mon, 29 Feb 2016 11:39:20 +0000
-Subject: [PATCH 257/381] clk: bcm2835: divider value has to be 1 or more
-
-Current clamping of a normal divider allows a value < 1 to be valid.
-
-A divider of < 1 would actually only be possible if we had a PLL...
-
-So this patch clamps the divider to 1.
-
-Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the
-audio domain clocks")
-
-Signed-off-by: Martin Sperl <[email protected]>
-Signed-off-by: Eric Anholt <[email protected]>
-Reviewed-by: Eric Anholt <[email protected]>
-(cherry picked from commit 997f16bd5d2e9b3456027f96fcadfe1e2bf12f4e)
----
- drivers/clk/bcm/clk-bcm2835.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1202,8 +1202,9 @@ static u32 bcm2835_clock_choose_div(stru
- 		div += unused_frac_mask + 1;
- 	div &= ~unused_frac_mask;
- 
--	/* Clamp to the limits. */
--	div = max(div, unused_frac_mask + 1);
-+	/* clamp to min divider of 1 */
-+	div = max_t(u32, div, 1 << CM_DIV_FRAC_BITS);
-+	/* clamp to the highest possible fractional divider */
- 	div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
- 				      CM_DIV_FRAC_BITS - data->frac_bits));
- 

target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch

@@ -67,7 +67,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  };
  
  struct bcm2835_pll {
-@@ -1192,7 +1196,7 @@ static u32 bcm2835_clock_choose_div(stru
+@@ -1196,7 +1200,7 @@ static u32 bcm2835_clock_choose_div(stru
  		GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
  	u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
  	u64 rem;
@@ -76,7 +76,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  
  	rem = do_div(temp, rate);
  	div = temp;
-@@ -1202,11 +1206,23 @@ static u32 bcm2835_clock_choose_div(stru
+@@ -1206,11 +1210,23 @@ static u32 bcm2835_clock_choose_div(stru
  		div += unused_frac_mask + 1;
  	div &= ~unused_frac_mask;
  
@@ -105,7 +105,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  
  	return div;
  }
-@@ -1300,9 +1316,26 @@ static int bcm2835_clock_set_rate(struct
+@@ -1304,9 +1320,26 @@ static int bcm2835_clock_set_rate(struct
  	struct bcm2835_cprman *cprman = clock->cprman;
  	const struct bcm2835_clock_data *data = clock->data;
  	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);

target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-clean-up-coding-style-issues.patch

@@ -33,7 +33,7 @@ Signed-off-by: Eric Anholt <[email protected]>
  	const char *osc_name;
  
  	struct clk_onecell_data onecell;
-@@ -1340,7 +1337,7 @@ static int bcm2835_clock_set_rate(struct
+@@ -1344,7 +1341,7 @@ static int bcm2835_clock_set_rate(struct
  }
  
  static int bcm2835_clock_determine_rate(struct clk_hw *hw,
@@ -42,7 +42,7 @@ Signed-off-by: Eric Anholt <[email protected]>
  {
  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
  	struct clk_hw *parent, *best_parent = NULL;
-@@ -1398,7 +1395,6 @@ static u8 bcm2835_clock_get_parent(struc
+@@ -1402,7 +1399,6 @@ static u8 bcm2835_clock_get_parent(struc
  	return (src & CM_SRC_MASK) >> CM_SRC_SHIFT;
  }
  

target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch

@@ -58,7 +58,7 @@ Acked-by: Eric Anholt <[email protected]>
  /*
   * These are fixed clocks. They're probably not all root clocks and it may
   * be possible to turn them on and off but until this is mapped out better
-@@ -1040,6 +1062,36 @@ static int bcm2835_pll_set_rate(struct c
+@@ -1044,6 +1066,36 @@ static int bcm2835_pll_set_rate(struct c
  	return 0;
  }
  
@@ -95,7 +95,7 @@ Acked-by: Eric Anholt <[email protected]>
  static const struct clk_ops bcm2835_pll_clk_ops = {
  	.is_prepared = bcm2835_pll_is_on,
  	.prepare = bcm2835_pll_on,
-@@ -1047,6 +1099,7 @@ static const struct clk_ops bcm2835_pll_
+@@ -1051,6 +1103,7 @@ static const struct clk_ops bcm2835_pll_
  	.recalc_rate = bcm2835_pll_get_rate,
  	.set_rate = bcm2835_pll_set_rate,
  	.round_rate = bcm2835_pll_round_rate,
@@ -103,7 +103,7 @@ Acked-by: Eric Anholt <[email protected]>
  };
  
  struct bcm2835_pll_divider {
-@@ -1147,6 +1200,26 @@ static int bcm2835_pll_divider_set_rate(
+@@ -1151,6 +1204,26 @@ static int bcm2835_pll_divider_set_rate(
  	return 0;
  }
  
@@ -130,7 +130,7 @@ Acked-by: Eric Anholt <[email protected]>
  static const struct clk_ops bcm2835_pll_divider_clk_ops = {
  	.is_prepared = bcm2835_pll_divider_is_on,
  	.prepare = bcm2835_pll_divider_on,
-@@ -1154,6 +1227,7 @@ static const struct clk_ops bcm2835_pll_
+@@ -1158,6 +1231,7 @@ static const struct clk_ops bcm2835_pll_
  	.recalc_rate = bcm2835_pll_divider_get_rate,
  	.set_rate = bcm2835_pll_divider_set_rate,
  	.round_rate = bcm2835_pll_divider_round_rate,
@@ -138,7 +138,7 @@ Acked-by: Eric Anholt <[email protected]>
  };
  
  /*
-@@ -1395,6 +1469,31 @@ static u8 bcm2835_clock_get_parent(struc
+@@ -1399,6 +1473,31 @@ static u8 bcm2835_clock_get_parent(struc
  	return (src & CM_SRC_MASK) >> CM_SRC_SHIFT;
  }
  
@@ -170,7 +170,7 @@ Acked-by: Eric Anholt <[email protected]>
  static const struct clk_ops bcm2835_clock_clk_ops = {
  	.is_prepared = bcm2835_clock_is_on,
  	.prepare = bcm2835_clock_on,
-@@ -1404,6 +1503,7 @@ static const struct clk_ops bcm2835_cloc
+@@ -1408,6 +1507,7 @@ static const struct clk_ops bcm2835_cloc
  	.determine_rate = bcm2835_clock_determine_rate,
  	.set_parent = bcm2835_clock_set_parent,
  	.get_parent = bcm2835_clock_get_parent,
@@ -178,7 +178,7 @@ Acked-by: Eric Anholt <[email protected]>
  };
  
  static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
-@@ -1422,6 +1522,7 @@ static const struct clk_ops bcm2835_vpu_
+@@ -1426,6 +1526,7 @@ static const struct clk_ops bcm2835_vpu_
  	.determine_rate = bcm2835_clock_determine_rate,
  	.set_parent = bcm2835_clock_set_parent,
  	.get_parent = bcm2835_clock_get_parent,

target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch

@@ -57,7 +57,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  struct bcm2835_pll {
  	struct clk_hw hw;
  	struct bcm2835_cprman *cprman;
-@@ -1654,14 +1673,81 @@ static struct clk *bcm2835_register_cloc
+@@ -1658,14 +1677,81 @@ static struct clk *bcm2835_register_cloc
  	return devm_clk_register(cprman->dev, &clock->hw);
  }
  
@@ -140,7 +140,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  	if (!cprman)
  		return -ENOMEM;
  
-@@ -1678,80 +1764,15 @@ static int bcm2835_clk_probe(struct plat
+@@ -1682,80 +1768,15 @@ static int bcm2835_clk_probe(struct plat
  
  	platform_set_drvdata(pdev, cprman);
  

target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch

@@ -474,7 +474,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  struct bcm2835_pll {
  	struct clk_hw hw;
  	struct bcm2835_cprman *cprman;
-@@ -1590,7 +1173,7 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1594,7 +1177,7 @@ bcm2835_register_pll_divider(struct bcm2
  
  	memset(&init, 0, sizeof(init));
  
@@ -483,7 +483,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  	init.num_parents = 1;
  	init.name = divider_name;
  	init.ops = &bcm2835_pll_divider_clk_ops;
-@@ -1689,50 +1272,401 @@ struct bcm2835_clk_desc {
+@@ -1693,50 +1276,401 @@ struct bcm2835_clk_desc {
  	const void *data;
  };
  

target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-enable-management-of-PCM-clock.patch

@@ -17,7 +17,7 @@ Reviewed-by: Eric Anholt <[email protected]>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1634,6 +1634,13 @@ static const struct bcm2835_clk_desc clk
+@@ -1638,6 +1638,13 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_HSMDIV,
  		.int_bits = 4,
  		.frac_bits = 8),

target/linux/brcm2708/patches-4.4/0264-clk-bcm2835-add-missing-PLL-clock-dividers.patch

@@ -14,7 +14,7 @@ Reviewed-by: Eric Anholt <[email protected]>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1383,6 +1383,22 @@ static const struct bcm2835_clk_desc clk
+@@ -1387,6 +1387,22 @@ static const struct bcm2835_clk_desc clk
  		.load_mask = CM_PLLA_LOADPER,
  		.hold_mask = CM_PLLA_HOLDPER,
  		.fixed_divider = 1),
@@ -37,7 +37,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  
  	/* PLLB is used for the ARM's clock. */
  	[BCM2835_PLLB]		= REGISTER_PLL(
-@@ -1497,6 +1513,22 @@ static const struct bcm2835_clk_desc clk
+@@ -1501,6 +1517,22 @@ static const struct bcm2835_clk_desc clk
  		.load_mask = CM_PLLD_LOADPER,
  		.hold_mask = CM_PLLD_HOLDPER,
  		.fixed_divider = 1),

target/linux/brcm2708/patches-4.4/0265-clk-bcm2835-add-missing-osc-and-per-clocks.patch

@@ -26,7 +26,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  #define CM_EMMCCTL		0x1c0
  #define CM_EMMCDIV		0x1c4
  
-@@ -1606,6 +1608,12 @@ static const struct bcm2835_clk_desc clk
+@@ -1610,6 +1612,12 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_TSENSDIV,
  		.int_bits = 5,
  		.frac_bits = 0),
@@ -39,7 +39,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  
  	/* clocks with vpu parent mux */
  	[BCM2835_CLOCK_H264]	= REGISTER_VPU_CLK(
-@@ -1620,6 +1628,7 @@ static const struct bcm2835_clk_desc clk
+@@ -1624,6 +1632,7 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_ISPDIV,
  		.int_bits = 4,
  		.frac_bits = 8),
@@ -47,7 +47,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  	/*
  	 * Secondary SDRAM clock.  Used for low-voltage modes when the PLL
  	 * in the SDRAM controller can't be used.
-@@ -1651,6 +1660,36 @@ static const struct bcm2835_clk_desc clk
+@@ -1655,6 +1664,36 @@ static const struct bcm2835_clk_desc clk
  		.is_vpu_clock = true),
  
  	/* clocks with per parent mux */
@@ -84,7 +84,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  
  	/* Arasan EMMC clock */
  	[BCM2835_CLOCK_EMMC]	= REGISTER_PER_CLK(
-@@ -1659,6 +1698,29 @@ static const struct bcm2835_clk_desc clk
+@@ -1663,6 +1702,29 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_EMMCDIV,
  		.int_bits = 4,
  		.frac_bits = 8),
@@ -114,7 +114,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  	/* HDMI state machine */
  	[BCM2835_CLOCK_HSM]	= REGISTER_PER_CLK(
  		.name = "hsm",
-@@ -1680,12 +1742,26 @@ static const struct bcm2835_clk_desc clk
+@@ -1684,12 +1746,26 @@ static const struct bcm2835_clk_desc clk
  		.int_bits = 12,
  		.frac_bits = 12,
  		.is_mash_clock = true),
@@ -141,7 +141,7 @@ Reviewed-by: Eric Anholt <[email protected]>
  	/* TV encoder clock.  Only operating frequency is 108Mhz.  */
  	[BCM2835_CLOCK_VEC]	= REGISTER_PER_CLK(
  		.name = "vec",
-@@ -1694,6 +1770,20 @@ static const struct bcm2835_clk_desc clk
+@@ -1698,6 +1774,20 @@ static const struct bcm2835_clk_desc clk
  		.int_bits = 4,
  		.frac_bits = 0),
  

target/linux/brcm2708/patches-4.4/0266-clk-bcm2835-Fix-PLL-poweron.patch

@@ -19,9 +19,9 @@ Signed-off-by: Stephen Boyd <[email protected]>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -557,6 +557,10 @@ static int bcm2835_pll_on(struct clk_hw
- 	const struct bcm2835_pll_data *data = pll->data;
- 	ktime_t timeout;
+@@ -561,6 +561,10 @@ static int bcm2835_pll_on(struct clk_hw
+ 		     cprman_read(cprman, data->a2w_ctrl_reg) &
+ 		     ~A2W_PLL_CTRL_PWRDN);
  
 +	cprman_write(cprman, data->a2w_ctrl_reg,
 +		     cprman_read(cprman, data->a2w_ctrl_reg) &

target/linux/brcm2708/patches-4.4/0349-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch

@@ -27,7 +27,7 @@ Signed-off-by: Eric Anholt <[email protected]>
  	bool is_vpu_clock;
  	bool is_mash_clock;
  };
-@@ -1242,7 +1244,7 @@ static struct clk *bcm2835_register_cloc
+@@ -1246,7 +1248,7 @@ static struct clk *bcm2835_register_cloc
  	init.parent_names = parents;
  	init.num_parents = data->num_mux_parents;
  	init.name = data->name;
@@ -36,7 +36,7 @@ Signed-off-by: Eric Anholt <[email protected]>
  
  	if (data->is_vpu_clock) {
  		init.ops = &bcm2835_vpu_clock_clk_ops;
-@@ -1661,6 +1663,7 @@ static const struct bcm2835_clk_desc clk
+@@ -1665,6 +1667,7 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_VPUDIV,
  		.int_bits = 12,
  		.frac_bits = 8,

target/linux/brcm2708/patches-4.4/0350-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch

@@ -20,7 +20,7 @@ Signed-off-by: Eric Anholt <[email protected]>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1246,6 +1246,15 @@ static struct clk *bcm2835_register_cloc
+@@ -1250,6 +1250,15 @@ static struct clk *bcm2835_register_cloc
  	init.name = data->name;
  	init.flags = data->flags | CLK_IGNORE_UNUSED;
  
@@ -36,7 +36,7 @@ Signed-off-by: Eric Anholt <[email protected]>
  	if (data->is_vpu_clock) {
  		init.ops = &bcm2835_vpu_clock_clk_ops;
  	} else {
-@@ -1720,13 +1729,15 @@ static const struct bcm2835_clk_desc clk
+@@ -1724,13 +1733,15 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_GP1DIV,
  		.int_bits = 12,
  		.frac_bits = 12,

target/linux/brcm2708/patches-4.4/0351-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch

@@ -22,7 +22,7 @@ Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1020,16 +1020,28 @@ static int bcm2835_clock_set_rate(struct
+@@ -1024,16 +1024,28 @@ static int bcm2835_clock_set_rate(struct
  	return 0;
  }
  
@@ -51,7 +51,7 @@ Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain
  	/*
  	 * Select parent clock that results in the closest but lower rate
  	 */
-@@ -1037,6 +1049,17 @@ static int bcm2835_clock_determine_rate(
+@@ -1041,6 +1053,17 @@ static int bcm2835_clock_determine_rate(
  		parent = clk_hw_get_parent_by_index(hw, i);
  		if (!parent)
  			continue;

target/linux/generic/patches-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch

@@ -15,87 +15,17 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
-@@ -14,6 +14,7 @@
- #include <linux/sched.h>
- #include <linux/syscalls.h>
- #include <linux/mm.h>
-+#include <linux/highmem.h>
- 
- #include <asm/cacheflush.h>
- #include <asm/processor.h>
-@@ -78,18 +79,29 @@ SYSCALL_DEFINE3(cacheflush, unsigned lon
- 	return 0;
- }
- 
-+static void
-+flush_highmem_page(struct page *page)
-+{
-+	void *addr = kmap_atomic(page);
-+	flush_data_cache_page((unsigned long)addr);
-+	kunmap_atomic(addr);
-+}
-+
- void __flush_dcache_page(struct page *page)
- {
- 	struct address_space *mapping = page_mapping(page);
- 	unsigned long addr;
- 
--	if (PageHighMem(page))
--		return;
- 	if (mapping && !mapping_mapped(mapping)) {
- 		SetPageDcacheDirty(page);
- 		return;
- 	}
- 
-+	if (PageHighMem(page)) {
-+		flush_highmem_page(page);
-+		return;
-+	}
-+
- 	/*
- 	 * We could delay the flush for the !page_mapping case too.  But that
- 	 * case is for exec env/arg pages and those are %99 certainly going to
-@@ -105,6 +117,11 @@ void __flush_anon_page(struct page *page
+@@ -111,6 +111,13 @@ void __flush_anon_page(struct page *page
  {
  	unsigned long addr = (unsigned long) page_address(page);
  
 +	if (PageHighMem(page)) {
-+		flush_highmem_page(page);
++		addr = (unsigned long)kmap_atomic(page);
++		flush_data_cache_page(addr);
++		__kunmap_atomic((void *)addr);
 +		return;
 +	}
 +
  	if (pages_do_alias(addr, vmaddr)) {
  		if (page_mapped(page) && !Page_dcache_dirty(page)) {
  			void *kaddr;
-@@ -123,8 +140,10 @@ void __flush_icache_page(struct vm_area_
- {
- 	unsigned long addr;
- 
--	if (PageHighMem(page))
-+	if (PageHighMem(page)) {
-+		flush_highmem_page(page);
- 		return;
-+	}
- 
- 	addr = (unsigned long) page_address(page);
- 	flush_data_cache_page(addr);
-@@ -142,12 +161,17 @@ void __update_cache(struct vm_area_struc
- 	if (unlikely(!pfn_valid(pfn)))
- 		return;
- 	page = pfn_to_page(pfn);
--	if (page_mapping(page) && Page_dcache_dirty(page)) {
-+	if (!Page_dcache_dirty(page) || !page_mapping(page))
-+		return;
-+
-+	if (PageHighMem(page)) {
-+		flush_highmem_page(page);
-+	} else {
- 		addr = (unsigned long) page_address(page);
- 		if (exec || pages_do_alias(addr, address & PAGE_MASK))
- 			flush_data_cache_page(addr);
--		ClearPageDcacheDirty(page);
- 	}
-+	ClearPageDcacheDirty(page);
- }
- 
- unsigned long _page_cachable_default;

target/linux/generic/patches-4.4/206-mips-disable-vdso.patch

@@ -4,7 +4,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/arch/mips/vdso/Makefile
 +++ b/arch/mips/vdso/Makefile
-@@ -26,11 +26,11 @@ aflags-vdso := $(ccflags-vdso) \
+@@ -28,11 +28,11 @@ aflags-vdso := $(ccflags-vdso) \
  # the comments on that file.
  #
  ifndef CONFIG_CPU_MIPSR6

target/linux/generic/patches-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/vdso/Makefile
 +++ b/arch/mips/vdso/Makefile
-@@ -75,7 +75,7 @@ $(obj-vdso): KBUILD_AFLAGS := $(aflags-v
+@@ -77,7 +77,7 @@ $(obj-vdso): KBUILD_AFLAGS := $(aflags-v
  
  $(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi)
  
@@ -9,7 +9,7 @@
  	$(call if_changed,vdsold)
  
  $(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE
-@@ -109,7 +109,7 @@ $(obj)/vdso-o32.lds: KBUILD_CPPFLAGS :=
+@@ -111,7 +111,7 @@ $(obj)/vdso-o32.lds: KBUILD_CPPFLAGS :=
  $(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE
  	$(call if_changed_dep,cpp_lds_S)
  
@@ -18,7 +18,7 @@
  	$(call if_changed,vdsold)
  
  $(obj)/vdso-o32-image.c: VDSO_NAME := o32
-@@ -145,7 +145,7 @@ $(obj)/vdso-n32.lds: KBUILD_CPPFLAGS :=
+@@ -147,7 +147,7 @@ $(obj)/vdso-n32.lds: KBUILD_CPPFLAGS :=
  $(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE
  	$(call if_changed_dep,cpp_lds_S)
  

target/linux/mvebu/patches-4.4/001-fix_gpio_config_on_linksys_boards.patch

@@ -1,58 +0,0 @@
-Some of the GPIO configs were wrong in the submitted DTS files,
-this patch fixes all affected boards.
-
-Signed-off-by: Imre Kaloz <[email protected]>
-
-Cc: <[email protected]> # v4.1 +
----
- arch/arm/boot/dts/armada-385-linksys.dtsi     | 6 +++---
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 4 ++--
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -245,7 +245,7 @@
- 		button@2 {
- 			label = "Factory Reset Button";
- 			linux,code = <KEY_RESTART>;
--			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- 		};
- 	};
- 
-@@ -260,7 +260,7 @@
- 		};
- 
- 		sata {
--			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- 			default-state = "off";
- 		};
- 	};
-@@ -313,7 +313,7 @@
- 
- &pinctrl {
- 	keys_pin: keys-pin {
--		marvell,pins = "mpp24", "mpp47";
-+		marvell,pins = "mpp24", "mpp29";
- 		marvell,function = "gpio";
- 	};
- 
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -304,13 +304,13 @@
- 		button@1 {
- 			label = "WPS";
- 			linux,code = <KEY_WPS_BUTTON>;
--			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		button@2 {
- 			label = "Factory Reset Button";
- 			linux,code = <KEY_RESTART>;
--			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- 		};
- 	};
- 

target/linux/ramips/patches-4.4/0013-owrt-hack-fix-mt7688-cache-issue.patch

@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <[email protected]>
  	sparse_init();
  	plat_swiotlb_setup();
  	paging_init();
-@@ -806,6 +805,7 @@ void __init setup_arch(char **cmdline_p)
+@@ -809,6 +808,7 @@ void __init setup_arch(char **cmdline_p)
  	prefill_possible_map();
  
  	cpu_cache_init();