Move mvswitch 88E6060 driver to the ath25

ath25 requires a 88E6060 driver to support boards such as Fonera 2.0g
(FON2202). The swconfig based mvswitch driver has not yet been ported to
the 5.10 kernel as the only user is the ath25 target while all other
targets have been switched to the upstream DSA implementation.

Switching ath25 to the DSA implementation is a complex task, since we
need either per-board platform data or DTS support. ath25 lacks both of
them and builds only a single generic image. So we need to keep the
swconfig driver implementation to easly and quickly port ath25 to the
5.10 kernel.

Since porting the mvswitch driver to 5.10 as a generic driver is not an
option, and since the ath25 is its only user, make mvswitch a target
specific driver to be able to port it to the 5.10 kernel as part of the
kernel version update of the target. This will allow us quickly migrate
to the next kernel version and not delay the next firmware release.

Suggested-by: Felix Fietkau <[email protected]>
Signed-off-by: Sergey Ryazanov <[email protected]>

target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch

@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -284,6 +284,10 @@ config IP17XX_PHY
+ 	tristate "Driver for IC+ IP17xx switches"
+ 	select SWCONFIG
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++	select ETHERNET_PACKET_MANGLE
++
+ config PSB6970_PHY
+ 	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
+ 	select SWCONFIG
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
+ obj-$(CONFIG_SWCONFIG_B53)	+= b53/
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o

target/linux/generic/config-5.10

@@ -3675,7 +3675,6 @@ CONFIG_MULTIUSER=y
 # CONFIG_MVMDIO is not set
 # CONFIG_MVNETA_BM is not set
 # CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MVSWITCH_PHY is not set
 # CONFIG_MV_XOR_V2 is not set
 # CONFIG_MWAVE is not set
 # CONFIG_MWL8K is not set

target/linux/generic/config-5.4

@@ -3343,7 +3343,6 @@ CONFIG_MULTIUSER=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_MVMDIO is not set
 # CONFIG_MVNETA_BM is not set
-# CONFIG_MVSWITCH_PHY is not set
 # CONFIG_MV_XOR_V2 is not set
 # CONFIG_MWAVE is not set
 # CONFIG_MWL8K is not set

target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch

@@ -12,7 +12,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -250,6 +250,85 @@ config LED_TRIGGER_PHY
+@@ -250,6 +250,81 @@ config LED_TRIGGER_PHY
  		for any speed known to the PHY.
  
  
@@ -50,10 +50,6 @@ Signed-off-by: Felix Fietkau <[email protected]>
 +	tristate "Driver for IC+ IP17xx switches"
 +	select SWCONFIG
 +
-+config MVSWITCH_PHY
-+	tristate "Driver for Marvell 88E6060 switches"
-+	select ETHERNET_PACKET_MANGLE
-+
 +config PSB6970_PHY
 +	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
 +	select SWCONFIG
@@ -100,7 +96,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  config SFP
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -22,6 +22,20 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
+@@ -22,6 +22,19 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
  obj-$(CONFIG_PHYLINK)		+= phylink.o
  obj-$(CONFIG_PHYLIB)		+= libphy.o
  
@@ -109,7 +105,6 @@ Signed-off-by: Felix Fietkau <[email protected]>
 +obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
 +obj-$(CONFIG_SWCONFIG_B53)	+= b53/
 +obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
 +obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
 +obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
 +obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o