ar71xx: reorganize target patches/files to make it possible to add boards without adding patch files

Signed-off-by: Felix Fietkau <[email protected]>

SVN-Revision: 47874

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -0,0 +1,1388 @@
+config ATH79_MACH_ALFA_AP96
+	bool "ALFA Network AP96 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_HORNET_UB
+	bool "ALFA Network Hornet-UB board support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_ALFA_NX
+	bool "ALFA Network N2/N5 board support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_TUBE2H
+	bool "ALFA Network Tube2H board support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_ALL0258N
+	bool "Allnet ALL0258N support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_ALL0315N
+	bool "Allnet ALL0315N support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_ANTMINER_S1
+	bool "Bitmain Antminer S1 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_ANTMINER_S3
+	bool "Bitmain Antminer S3 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARDUINO_YUN
+	bool "Arduino Yun"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Arduino Yun.
+
+config ATH79_MACH_AP113
+	bool "Atheros AP113 board support"
+	select SOC_AR724X
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_PB9X_PCI if PCI
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_USB
+	select ATH79_DEV_ETH
+
+config ATH79_MACH_AP132
+	bool "Atheros AP132 reference board"
+	select SOC_QCA955X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Atheros AP132 reference boards.
+
+config ATH79_MACH_AP143
+	bool "Atheros AP143 reference board"
+	select SOC_QCA953X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_ETH
+	select ATH79_DEV_M25P80
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Atheros AP143 reference board.
+
+config ATH79_MACH_AP147
+	bool "Atheros AP147 reference board"
+	select SOC_QCA953X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_AP9X_PCI if PCI
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QCA AP147 reference boards.
+
+config ATH79_MACH_AP152
+	bool "Atheros AP152 reference board"
+	select SOC_QCA956X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_AP9X_PCI if PCI
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QCA AP152 reference boards.
+
+
+config ATH79_MACH_AP83
+	bool "Atheros AP83 board support"
+	select SOC_AR913X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_AP96
+	bool "Atheros AP96 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_PB42
+	bool "Atheros PB42 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_PB92
+	bool "Atheros PB92 board support"
+	select SOC_AR724X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_PB9X_PCI if PCI
+	select ATH79_DEV_USB
+
+config ATH79_MACH_AW_NR580
+	bool "AzureWave AW-NR580 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_F9K1115V2
+	bool "Belkin AC1750DB board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_EPG5000
+	bool "EnGenius EPG5000 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_ESR1750
+	bool "EnGenius ESR1750 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_WHR_HP_G300N
+	bool "Buffalo WHR-HP-G300N board support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_WLAE_AG300N
+	bool "Buffalo WLAE-AG300N board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_WLR8100
+	bool "Sitecom WLR-8100 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_WZR_HP_AG300H
+	bool "Buffalo WZR-HP-AG300H board support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_HP_G300NH
+	bool "Buffalo WZR-HP-G300NH board support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	select RTL8366_SMI
+
+config ATH79_MACH_WZR_HP_G300NH2
+	bool "Buffalo WZR-HP-G300NH2 board support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_HP_G450H
+	bool "Buffalo WZR-HP-G450H board support"
+	select SOC_AR724X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_450HP2
+	bool "Buffalo WZR-450HP2 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_WP543
+	bool "Compex WP543/WPJ543 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select MYLOADER
+
+config ATH79_MACH_WPE72
+	bool "Compex WPE72/WPE72NX board support"
+	select SOC_AR724X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select MYLOADER
+
+config ATH79_MACH_WPJ344
+	bool "Compex WPJ344 board support"
+	select SOC_AS934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_WPJ531
+       bool "Compex WPJ531 board support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_WPJ558
+	bool "Compex WPJ558 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_DGL_5500_A1
+	bool "D-Link DGL-5500 A1 support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_USB
+
+config ATH79_MACH_DHP_1565_A1
+	bool "D-Link DHP-1565 rev. A1 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_DIR_505_A1
+	bool "D-Link DIR-505-A1 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_DIR_600_A1
+	bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_NVRAM
+
+config ATH79_MACH_DIR_615_C1
+	bool "D-Link DIR-615 rev. C1 support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_DIR_615_I1
+	bool "D-Link DIR-615 rev. I1 support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_DIR_825_B1
+	bool "D-Link DIR-825 rev. B1 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_DIR_825_C1
+	bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_DLAN_HOTSPOT
+	bool "devolo dLAN Hotspot support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_DLAN_PRO_500_WP
+	bool "devolo dLAN pro 500 Wireless+ support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_USB
+
+config ATH79_MACH_DLAN_PRO_1200_AC
+	bool "devolo dLAN pro 1200+ WiFi ac support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_NFC
+	select ATH79_DEV_USB
+
+config ATH79_MACH_DR344
+	bool "Wallys DR344 board support"
+	select SOC_AS934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_DRAGINO2
+	bool "DRAGINO V2 support"
+	select SOC_AR933X
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_ETH
+	select ATH79_DEV_USB
+
+config ATH79_MACH_ESR900
+	bool "EnGenius ESR900 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_EW_DORIN
+	bool "embedded wireless Dorin Platform support"
+	select SOC_AR933X
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_ETH
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Dorin Platform from www.80211.de .
+
+config ATH79_MACH_EL_M150
+	bool "EasyLink EL-M150 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_EL_MINI
+	bool "EasyLink EL-MINI support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_GL_AR150
+	bool "GL AR150 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_GL_AR300
+	bool "GL_AR300 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_GL_DOMINO
+	bool "DOMINO support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_GL_INET
+	bool "GL-INET support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_EAP300V2
+	bool "EnGenius EAP300 v2 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_GS_MINIBOX_V1
+	bool "Gainstrong MiniBox V1.0 support"
+	select SOC_AR933X
+	select ARH79_DEV_ETH
+	select ARH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_GS_OOLITE
+       bool "GS Oolite V1 support"
+       select SOC_AR933X
+       select ARH79_DEV_ETH
+       select ARH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_HIWIFI_HC6361
+	bool "HiWiFi HC6361 board support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_JA76PF
+	bool "jjPlus JA76PF board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_JWAP003
+	bool "jjPlus JWAP003 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_WRT160NL
+	bool "Linksys WRT160NL board support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_WRT400N
+	bool "Linksys WRT400N board support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_R6100
+	bool "NETGEAR R6100 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_NFC
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MC_MAC1200R
+	bool "MERCURY MAC1200R board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_RB4XX
+	bool "MikroTik RouterBOARD 4xx series support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_USB
+
+config ATH79_MACH_RB750
+	bool "MikroTik RouterBOARD 750 support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_USB
+	select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RB91X
+	bool "MikroTik RouterBOARD 91X support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_SPI
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_USB
+	select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RB922
+	bool "MikroTik RouterBOARD 922 support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_NFC
+	select ATH79_DEV_USB
+	select ATH79_ROUTERBOOT
+	select RLE_DECOMPRESS
+
+config ATH79_MACH_RB95X
+       bool "MikroTik RouterBOARD 95X support"
+       select SOC_AR934X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_NFC
+       select ATH79_DEV_WMAC
+       select ATH79_DEV_USB
+       select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RB2011
+	bool "MikroTik RouterBOARD 2011 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_NFC
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RBSXTLITE
+	bool "MikroTik RouterBOARD SXT Lite"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_NFC
+	select ATH79_DEV_WMAC
+	select ATH79_ROUTERBOOT
+
+config ATH79_MACH_SMART_300
+	bool "NC-LINK SMART-300 board support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_WNDAP360
+	bool "NETGEAR WNDAP360 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_WNDR3700
+	bool "NETGEAR WNDR3700 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_WNDR4300
+	bool "NETGEAR WNDR3700v4/WNDR4300 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_NFC
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_WNR2000
+	bool "NETGEAR WNR2000 board support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_WNR2000_V3
+	bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+	config ATH79_MACH_WNR2200
+	bool "NETGEAR WNR2200 board support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_WNR2000_V4
+	bool "NETGEAR WNR2000 V4"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_OM2P
+	bool "OpenMesh OM2P board support"
+	select SOC_AR724X
+	select SOC_AR933X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_OM5P
+	bool "OpenMesh OM5P board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_ONION_OMEGA
+	bool "ONION OMEGA support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR12
+	bool "Meraki MR12 board support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR16
+	bool "Meraki MR16 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR600
+	bool "OpenMesh MR600 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MZK_W04NU
+	bool "Planex MZK-W04NU board support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MZK_W300NH
+	bool "Planex MZK-W300NH board support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_RW2458N
+	bool "Redwave RW2458N board support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_CAP4200AG
+	bool "Senao CAP4200AG support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR1750
+	bool "OpenMesh MR1750 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR900
+	bool "OpenMesh MR900 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_EAP7660D
+	bool "Senao EAP7660D support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_BSB
+	bool "Smart Electronics Black Swift board"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARCHER_C7
+	bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CPE510
+	bool "TP-LINK CPE510 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR11U
+	bool "TP-LINK TL-MR11U/TL-MR3040 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR13U
+	bool "TP-LINK TL-MR13U support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR3020
+	bool "TP-LINK TL-MR3020 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR3X20
+	bool "TP-LINK TL-MR3220/3420 support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_TL_WAX50RE
+	bool "TP-LINK TL-WA750/850RE support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WA701ND_V2
+	bool "TP-LINK TL-WA701ND v2 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WA7210N_V2
+       bool "TP-LINK TL-WA7210N v2 support"
+       select SOC_AR724X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WA830RE_V2
+	bool "TP-LINK TL-WA830RE v2 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WA901ND
+	bool "TP-LINK TL-WA901ND/TL-WA7510N support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WA901ND_V2
+	bool "TP-LINK TL-WA901ND v2 support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR3320_V2
+	bool "TP-LINK TL-WDR3320 v2 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR3500
+	bool "TP-LINK TL-WDR3500 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR4300
+	bool "TP-LINK TL-WDR3600/4300/4310 board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR6500_V2
+	bool "TP-LINK TL-WDR6500 v2 board support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR703N
+	bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR720N_V3
+	bool "TP-LINK TL-WR720N v3/v4 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR741ND
+	bool "TP-LINK TL-WR741ND support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR741ND_V4
+	bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR841N_V1
+	bool "TP-LINK TL-WR841N v1 support"
+	select SOC_AR71XX
+	select ATH79_DEV_DSA
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR841N_V8
+	bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR841N_V9
+       bool "TP-LINK TL-WR841N/ND v9 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR941ND
+	bool "TP-LINK TL-WR941ND support"
+	select SOC_AR913X
+	select ATH79_DEV_DSA
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR941ND_V6
+	bool "TP-LINK TL-WR941ND v6 support"
+	select SOC_QCA956X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1041N_V2
+	bool "TP-LINK TL-WR1041N v2 support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1043ND
+	bool "TP-LINK TL-WR1043ND support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1043ND_V2
+	bool "TP-LINK TL-WR1043ND v2 support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR2543N
+	bool "TP-LINK TL-WR2543N/ND support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_TEW_632BRP
+	bool "TRENDnet TEW-632BRP support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_TEW_673GRU
+	bool "TRENDnet TEW-673GRU support"
+	select SOC_AR71XX
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_NVRAM
+
+config ATH79_MACH_TEW_712BR
+	bool "TRENDnet TEW-712BR support"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_TEW_732BR
+	bool "TRENDnet TEW-732BR support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_UBNT
+	bool "Ubiquiti AR71xx based boards support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_WEIO
+	bool "WeIO board"
+	select SOC_AR933X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_MYNET_N600
+	bool "WD My Net N600 board support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_MYNET_N750
+	bool "WD My Net N750 board support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_MYNET_REXT
+	bool "WD My Net Wi-Fi Range Extender board support"
+	select SOC_AR934X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_NVRAM
+
+config ATH79_MACH_ZCN_1523H
+	bool "Zcomax ZCN-1523H support"
+	select SOC_AR724X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+
+config ATH79_MACH_NBG460N
+	bool "Zyxel NBG460N/550N/550NH board support"
+	select SOC_AR913X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_NBG6716
+	bool "Zyxel NBG6616/NBG6716 board support"
+	select SOC_QCA955X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_NFC
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CARAMBOLA2
+	bool "8devices Carambola2 board"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E316N_V2
+	bool "COMFAST CF-E316N v2 board"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_BHU_BXU2000N2_A
+	bool "BHU BXU2000n-2 rev. A support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_QIHOO_C301
+	bool "Qihoo 360 C301 board support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_USB
+	select ATH79_NVRAM

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -0,0 +1,186 @@
+#
+# Makefile for the Atheros AR71XX/AR724X/AR913X specific parts of the kernel
+#
+# Copyright (C) 2008-2011 Gabor Juhos <[email protected]>
+# Copyright (C) 2008 Imre Kaloz <[email protected]>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+
+obj-y	:= prom.o setup.o irq.o common.o clock.o gpio.o
+
+obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
+obj-$(CONFIG_PCI)			+= pci.o
+
+#
+# Devices
+#
+obj-y					+= dev-common.o
+obj-$(CONFIG_ATH79_DEV_AP9X_PCI)	+= dev-ap9x-pci.o
+obj-$(CONFIG_ATH79_DEV_DSA)		+= dev-dsa.o
+obj-$(CONFIG_ATH79_DEV_ETH)		+= dev-eth.o
+obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
+obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
+obj-$(CONFIG_ATH79_DEV_M25P80)		+= dev-m25p80.o
+obj-$(CONFIG_ATH79_DEV_NFC)		+= dev-nfc.o
+obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
+obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
+obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
+
+#
+# Miscellaneous objects
+#
+obj-$(CONFIG_ATH79_NVRAM)		+= nvram.o
+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= pci-ath9k-fixup.o
+obj-$(CONFIG_ATH79_ROUTERBOOT)		+= routerboot.o
+
+#
+# Machines
+#
+obj-$(CONFIG_ATH79_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
+obj-$(CONFIG_ATH79_MACH_ALFA_NX)	+= mach-alfa-nx.o
+obj-$(CONFIG_ATH79_MACH_ALL0258N)	+= mach-all0258n.o
+obj-$(CONFIG_ATH79_MACH_ALL0315N)	+= mach-all0315n.o
+obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
+obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
+obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN)	+= mach-arduino-yun.o
+obj-$(CONFIG_ATH79_MACH_AP113)		+= mach-ap113.o
+obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
+obj-$(CONFIG_ATH79_MACH_AP132)		+= mach-ap132.o
+obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
+obj-$(CONFIG_ATH79_MACH_AP143)		+= mach-ap143.o
+obj-$(CONFIG_ATH79_MACH_AP147)		+= mach-ap147.o
+obj-$(CONFIG_ATH79_MACH_AP152)		+= mach-ap152.o
+obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
+obj-$(CONFIG_ATH79_MACH_AP83)		+= mach-ap83.o
+obj-$(CONFIG_ATH79_MACH_AP96)		+= mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C7)	+= mach-archer-c7.o
+obj-$(CONFIG_ATH79_MACH_AW_NR580)	+= mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_BSB)		+= mach-bsb.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
+obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)	+= mach-cf-e316n-v2.o
+obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
+obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT)	+= mach-dlan-hotspot.o
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)	+= mach-dlan-pro-500-wp.o
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC)	+= mach-dlan-pro-1200-ac.o
+obj-$(CONFIG_ATH79_MACH_DGL_5500_A1)	+= mach-dgl-5500-a1.o
+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)	+= mach-dhp-1565-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_505_A1)	+= mach-dir-505-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_I1)	+= mach-dir-615-i1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_C1)	+= mach-dir-825-c1.o
+obj-$(CONFIG_ATH79_MACH_DR344)	+= mach-dr344.o
+obj-$(CONFIG_ATH79_MACH_DRAGINO2)	+= mach-dragino2.o
+obj-$(CONFIG_ATH79_MACH_ESR900)	+= mach-esr900.o
+obj-$(CONFIG_ATH79_MACH_EW_DORIN)	+= mach-ew-dorin.o
+obj-$(CONFIG_ATH79_MACH_EAP300V2)	+= mach-eap300v2.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D)	+= mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_EL_M150)	+= mach-el-m150.o
+obj-$(CONFIG_ATH79_MACH_EL_MINI)	+= mach-el-mini.o
+obj-$(CONFIG_ATH79_MACH_EPG5000)	+= mach-epg5000.o
+obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
+obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
+obj-$(CONFIG_ATH79_MACH_GL_AR150)   += mach-gl-ar150.o
+obj-$(CONFIG_ATH79_MACH_GL_AR300)	+= mach-gl-ar300.o
+obj-$(CONFIG_ATH79_MACH_GL_DOMINO)		+= mach-gl-domino.o
+obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
+obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)	+= mach-gs-minibox-v1.o
+obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
+obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)	+= mach-hiwifi-hc6361.o
+obj-$(CONFIG_ATH79_MACH_JA76PF)		+= mach-ja76pf.o
+obj-$(CONFIG_ATH79_MACH_JWAP003)	+= mach-jwap003.o
+obj-$(CONFIG_ATH79_MACH_HORNET_UB)	+= mach-hornet-ub.o
+obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)     += mach-mc-mac1200r.o
+obj-$(CONFIG_ATH79_MACH_MR12)		+= mach-mr12.o
+obj-$(CONFIG_ATH79_MACH_MR16)		+= mach-mr16.o
+obj-$(CONFIG_ATH79_MACH_MR1750)		+= mach-mr1750.o
+obj-$(CONFIG_ATH79_MACH_MR600)		+= mach-mr600.o
+obj-$(CONFIG_ATH79_MACH_MR900)		+= mach-mr900.o
+obj-$(CONFIG_ATH79_MACH_MYNET_N600)	+= mach-mynet-n600.o
+obj-$(CONFIG_ATH79_MACH_MYNET_N750)	+= mach-mynet-n750.o
+obj-$(CONFIG_ATH79_MACH_MYNET_REXT)	+= mach-mynet-rext.o
+obj-$(CONFIG_ATH79_MACH_MZK_W04NU)	+= mach-mzk-w04nu.o
+obj-$(CONFIG_ATH79_MACH_MZK_W300NH)	+= mach-mzk-w300nh.o
+obj-$(CONFIG_ATH79_MACH_NBG460N)	+= mach-nbg460n.o
+obj-$(CONFIG_ATH79_MACH_OM2P)		+= mach-om2p.o
+obj-$(CONFIG_ATH79_MACH_OM5P)		+= mach-om5p.o
+obj-$(CONFIG_ATH79_MACH_ONION_OMEGA)  += mach-onion-omega.o
+obj-$(CONFIG_ATH79_MACH_PB42)		+= mach-pb42.o
+obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_PB92)		+= mach-pb92.o
+obj-$(CONFIG_ATH79_MACH_QIHOO_C301)	+= mach-qihoo-c301.o
+obj-$(CONFIG_ATH79_MACH_R6100)		+= mach-r6100.o
+obj-$(CONFIG_ATH79_MACH_RB4XX)		+= mach-rb4xx.o
+obj-$(CONFIG_ATH79_MACH_RB750)		+= mach-rb750.o
+obj-$(CONFIG_ATH79_MACH_RB91X)		+= mach-rb91x.o
+obj-$(CONFIG_ATH79_MACH_RB922)		+= mach-rb922.o
+obj-$(CONFIG_ATH79_MACH_RB95X)		+= mach-rb95x.o
+obj-$(CONFIG_ATH79_MACH_RB2011)		+= mach-rb2011.o
+obj-$(CONFIG_ATH79_MACH_RBSXTLITE)	+= mach-rbsxtlite.o
+obj-$(CONFIG_ATH79_MACH_RW2458N)	+= mach-rw2458n.o
+obj-$(CONFIG_ATH79_MACH_SMART_300)	+= mach-smart-300.o
+obj-$(CONFIG_ATH79_MACH_TEW_632BRP)	+= mach-tew-632brp.o
+obj-$(CONFIG_ATH79_MACH_TEW_673GRU)	+= mach-tew-673gru.o
+obj-$(CONFIG_ATH79_MACH_TEW_712BR)	+= mach-tew-712br.o
+obj-$(CONFIG_ATH79_MACH_TEW_732BR)	+= mach-tew-732br.o
+obj-$(CONFIG_ATH79_MACH_TL_MR11U)	+= mach-tl-mr11u.o
+obj-$(CONFIG_ATH79_MACH_TL_MR13U)	+= mach-tl-mr13u.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3020)	+= mach-tl-mr3020.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3X20)	+= mach-tl-mr3x20.o
+obj-$(CONFIG_ATH79_MACH_TL_WAX50RE)     += mach-tl-wax50re.o
+obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2)	+= mach-tl-wa701nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2)	+= mach-tl-wa7210n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2)	+= mach-tl-wa830re-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2)  += mach-tl-wdr3320-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2)  += mach-tl-wdr6500-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)	+= mach-tl-wr741nd-v4.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8)	+= mach-tl-wr841n-v8.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9)	+= mach-tl-wr841n-v9.o
+obj-$(CONFIG_ATH79_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6)	+= mach-tl-wr941nd-v6.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2)	+= mach-tl-wr1041n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)	+= mach-tl-wr1043nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2)	+= mach-tl-wr1043nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR2543N)	+= mach-tl-wr2543n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR703N)	+= mach-tl-wr703n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3)	+= mach-tl-wr720n-v3.o
+obj-$(CONFIG_ATH79_MACH_TUBE2H)		+= mach-tube2h.o
+obj-$(CONFIG_ATH79_MACH_UBNT)		+= mach-ubnt.o
+obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o
+obj-$(CONFIG_ATH79_MACH_WEIO)		+= mach-weio.o
+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N)	+= mach-whr-hp-g300n.o
+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N)	+= mach-wlae-ag300n.o
+obj-$(CONFIG_ATH79_MACH_WLR8100)	+= mach-wlr8100.o
+obj-$(CONFIG_ATH79_MACH_WNDAP360)	+= mach-wndap360.o
+obj-$(CONFIG_ATH79_MACH_WNDR3700)	+= mach-wndr3700.o
+obj-$(CONFIG_ATH79_MACH_WNDR4300)	+= mach-wndr4300.o
+obj-$(CONFIG_ATH79_MACH_WNR2000)	+= mach-wnr2000.o
+obj-$(CONFIG_ATH79_MACH_WNR2000_V3)	+= mach-wnr2000-v3.o
+obj-$(CONFIG_ATH79_MACH_WNR2000_V4)	+= mach-wnr2000-v4.o
+obj-$(CONFIG_ATH79_MACH_WNR2200)	+= mach-wnr2200.o
+obj-$(CONFIG_ATH79_MACH_WP543)		+= mach-wp543.o
+obj-$(CONFIG_ATH79_MACH_WPE72)		+= mach-wpe72.o
+obj-$(CONFIG_ATH79_MACH_WPJ344)	+= mach-wpj344.o
+obj-$(CONFIG_ATH79_MACH_WPJ531)	+= mach-wpj531.o
+obj-$(CONFIG_ATH79_MACH_WPJ558)	+= mach-wpj558.o
+obj-$(CONFIG_ATH79_MACH_WRT160NL)	+= mach-wrt160nl.o
+obj-$(CONFIG_ATH79_MACH_WRT400N)	+= mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)	+= mach-wzr-hp-g300nh.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)	+= mach-wzr-hp-g300nh2.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)	+= mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H)	+= mach-wzr-hp-g450h.o
+obj-$(CONFIG_ATH79_MACH_WZR_450HP2)	+= mach-wzr-450hp2.o
+obj-$(CONFIG_ATH79_MACH_ZCN_1523H)	+= mach-zcn-1523h.o
+obj-$(CONFIG_ATH79_MACH_CARAMBOLA2)	+= mach-carambola2.o
+obj-$(CONFIG_ATH79_MACH_NBG6716)	+= mach-nbg6716.o

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -0,0 +1,240 @@
+/*
+ *  Atheros AR71XX/AR724X/AR913X machine type definitions
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <[email protected]>
+ *  Copyright (C) 2008 Imre Kaloz <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_MACHTYPE_H
+#define _ATH79_MACHTYPE_H
+
+#include <asm/mips_machine.h>
+
+enum ath79_mach_type {
+	ATH79_MACH_GENERIC = 0,
+	ATH79_MACH_ALFA_AP96,		/* ALFA Network AP96 board */
+	ATH79_MACH_ALFA_NX,		/* ALFA Network N2/N5 board */
+	ATH79_MACH_ALL0258N,		/* Allnet ALL0258N */
+	ATH79_MACH_ALL0305,		/* Allnet ALL0305 */
+	ATH79_MACH_ALL0315N,		/* Allnet ALL0315N */
+	ATH79_MACH_ANTMINER_S1,	/* Antminer S1 */
+	ATH79_MACH_ANTMINER_S3,	/* Antminer S3 */
+	ATH79_MACH_ARDUINO_YUN,		/* Yun */
+	ATH79_MACH_AP113,		/* Atheros AP113 reference board */
+	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
+	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
+	ATH79_MACH_AP132,		/* Atheros AP132 reference board */
+	ATH79_MACH_AP135_020,		/* Atheros AP135-020 reference board */
+	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
+	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
+	ATH79_MACH_AP143,		/* Atheros AP143 reference board */
+	ATH79_MACH_AP147_010,		/* Atheros AP147-010 reference board */
+	ATH79_MACH_AP152,		/* Atheros AP152 reference board */
+	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
+	ATH79_MACH_AP83,		/* Atheros AP83 */
+	ATH79_MACH_AP96,		/* Atheros AP96 */
+	ATH79_MACH_ARCHER_C5,		/* TP-LINK Archer C5 board */
+	ATH79_MACH_ARCHER_C7,		/* TP-LINK Archer C7 board */
+	ATH79_MACH_AW_NR580,		/* AzureWave AW-NR580 */
+	ATH79_MACH_BHU_BXU2000N2_A1,	/* BHU BXU2000n-2 A1 */
+	ATH79_MACH_BSB,			/* Smart Electronics Black Swift board */
+	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
+	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
+	ATH79_MACH_CF_E316N_V2,		/* COMFAST CF-E316N v2 */
+	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
+	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
+	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
+	ATH79_MACH_DGL_5500_A1,		/* D-link DGL-5500 rev. A1 */
+	ATH79_MACH_DHP_1565_A1,		/* D-Link DHP-1565 rev. A1 */
+	ATH79_MACH_DIR_505_A1,		/* D-Link DIR-505 rev. A1 */
+	ATH79_MACH_DIR_600_A1,		/* D-Link DIR-600 rev. A1 */
+	ATH79_MACH_DIR_615_C1,		/* D-Link DIR-615 rev. C1 */
+	ATH79_MACH_DIR_615_E1,		/* D-Link DIR-615 rev. E1 */
+	ATH79_MACH_DIR_615_E4,		/* D-Link DIR-615 rev. E4 */
+	ATH79_MACH_DIR_615_I1,		/* D-Link DIR-615 rev. I1 */
+	ATH79_MACH_DIR_825_B1,		/* D-Link DIR-825 rev. B1 */
+	ATH79_MACH_DIR_825_C1,		/* D-Link DIR-825 rev. C1 */
+	ATH79_MACH_DIR_835_A1,		/* D-Link DIR-835 rev. A1 */
+	ATH79_MACH_DLAN_HOTSPOT,	/* devolo dLAN Hotspot */
+	ATH79_MACH_DLAN_PRO_500_WP,	/* devolo dLAN pro 500 Wireless+ */
+	ATH79_MACH_DLAN_PRO_1200_AC,	/* devolo dLAN pro 1200+ WiFi ac*/
+	ATH79_MACH_DR344,		/* Wallys DR344 */
+	ATH79_MACH_DRAGINO2,		/* Dragino Version 2 */
+	ATH79_MACH_ESR900,		/* EnGenius ESR900 */
+	ATH79_MACH_EW_DORIN,		/* embedded wireless Dorin Platform */
+	ATH79_MACH_EW_DORIN_ROUTER,	/* embedded wireless Dorin Router Platform */
+	ATH79_MACH_EAP300V2,		/* EnGenius EAP300 v2 */
+	ATH79_MACH_EAP7660D,		/* Senao EAP7660D */
+	ATH79_MACH_EL_M150,		/* EasyLink EL-M150 */
+	ATH79_MACH_EL_MINI,		/* EasyLink EL-MINI */
+	ATH79_MACH_ESR1750,		/* EnGenius ESR1750 */
+	ATH79_MACH_EPG5000,		/* EnGenius EPG5000 */
+	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
+	ATH79_MACH_GL_AR150,    /* GL-AR150 support */
+	ATH79_MACH_GL_AR300,		/* GL-AR300 */
+	ATH79_MACH_GL_DOMINO,		/* Domino */
+	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
+	ATH79_MACH_GS_MINIBOX_V1,	/* Gainstrong MiniBox V1.0 */
+	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
+	ATH79_MACH_HIWIFI_HC6361,	/* HiWiFi HC6361 */
+	ATH79_MACH_JA76PF,		/* jjPlus JA76PF */
+	ATH79_MACH_JA76PF2,		/* jjPlus JA76PF2 */
+	ATH79_MACH_JWAP003,		/* jjPlus JWAP003 */
+	ATH79_MACH_HORNET_UB,		/* ALFA Networks Hornet-UB */
+	ATH79_MACH_MR12,		/* Cisco Meraki MR12 */
+	ATH79_MACH_MR16,		/* Cisco Meraki MR16 */
+	ATH79_MACH_MR1750,		/* OpenMesh MR1750 */
+	ATH79_MACH_MR600V2,		/* OpenMesh MR600v2 */
+	ATH79_MACH_MR600,		/* OpenMesh MR600 */
+	ATH79_MACH_MR900,		/* OpenMesh MR900 */
+	ATH79_MACH_MR900v2,		/* OpenMesh MR900v2 */
+	ATH79_MACH_MYNET_N600,		/* WD My Net N600 */
+	ATH79_MACH_MYNET_N750,		/* WD My Net N750 */
+	ATH79_MACH_MYNET_REXT,		/* WD My Net Wi-Fi Range Extender */
+	ATH79_MACH_MZK_W04NU,		/* Planex MZK-W04NU */
+	ATH79_MACH_MZK_W300NH,		/* Planex MZK-W300NH */
+	ATH79_MACH_NBG460N,		/* Zyxel NBG460N/550N/550NH */
+	ATH79_MACH_NBG6616,		/* Zyxel NBG6616 */
+	ATH79_MACH_NBG6716,		/* Zyxel NBG6716 */
+	ATH79_MACH_OM2P_HSv2,		/* OpenMesh OM2P-HSv2 */
+	ATH79_MACH_OM2P_HS,		/* OpenMesh OM2P-HS */
+	ATH79_MACH_OM2P_LC,		/* OpenMesh OM2P-LC */
+	ATH79_MACH_OM2Pv2,		/* OpenMesh OM2Pv2 */
+	ATH79_MACH_OM2P,		/* OpenMesh OM2P */
+	ATH79_MACH_OM5P_AN,		/* OpenMesh OM5P-AN */
+	ATH79_MACH_OM5P,		/* OpenMesh OM5P */
+	ATH79_MACH_ONION_OMEGA,		/* ONION OMEGA */
+	ATH79_MACH_PB42,		/* Atheros PB42 */
+	ATH79_MACH_PB92,		/* Atheros PB92 */
+	ATH79_MACH_QIHOO_C301,		/* Qihoo 360 C301 */
+	ATH79_MACH_R6100,		/* NETGEAR R6100 */
+	ATH79_MACH_RB_411,		/* MikroTik RouterBOARD 411/411A/411AH */
+	ATH79_MACH_RB_411U,		/* MikroTik RouterBOARD 411U */
+	ATH79_MACH_RB_433,		/* MikroTik RouterBOARD 433/433AH */
+	ATH79_MACH_RB_433U,		/* MikroTik RouterBOARD 433UAH */
+	ATH79_MACH_RB_435G,		/* MikroTik RouterBOARD 435G */
+	ATH79_MACH_RB_450G,		/* MikroTik RouterBOARD 450G */
+	ATH79_MACH_RB_450,		/* MikroTik RouterBOARD 450 */
+	ATH79_MACH_RB_493,		/* Mikrotik RouterBOARD 493/493AH */
+	ATH79_MACH_RB_493G,		/* Mikrotik RouterBOARD 493G */
+	ATH79_MACH_RB_711GR100,		/* Mikrotik RouterBOARD 911/912 boards */
+	ATH79_MACH_RB_750,		/* MikroTik RouterBOARD 750 */
+	ATH79_MACH_RB_750G_R3,		/* MikroTik RouterBOARD 750GL */
+	ATH79_MACH_RB_751,		/* MikroTik RouterBOARD 751 */
+	ATH79_MACH_RB_751G,		/* Mikrotik RouterBOARD 751G */
+	ATH79_MACH_RB_922GS,		/* Mikrotik RouterBOARD 911/922GS boards */
+	ATH79_MACH_RB_951G,		/* Mikrotik RouterBOARD 951G */
+	ATH79_MACH_RB_951U,		/* Mikrotik RouterBOARD 951Ui-2HnD */
+	ATH79_MACH_RB_2011G,		/* Mikrotik RouterBOARD 2011UAS-2HnD */
+	ATH79_MACH_RB_2011L,		/* Mikrotik RouterBOARD 2011L */
+	ATH79_MACH_RB_2011US,		/* Mikrotik RouterBOARD 2011UAS */
+	ATH79_MACH_RB_2011R5,		/* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
+	ATH79_MACH_RB_SXTLITE2ND,	/* Mikrotik RouterBOARD SXT Lite 2nD */
+	ATH79_MACH_RB_SXTLITE5ND,	/* Mikrotik RouterBOARD SXT Lite 5nD */
+	ATH79_MACH_RW2458N,		/* Redwave RW2458N */
+	ATH79_MACH_SMART_300,		/* NC-LINK SMART-300 */
+	ATH79_MACH_TEW_632BRP,		/* TRENDnet TEW-632BRP */
+	ATH79_MACH_TEW_673GRU,		/* TRENDnet TEW-673GRU */
+	ATH79_MACH_TEW_712BR,		/* TRENDnet TEW-712BR */
+	ATH79_MACH_TEW_732BR,		/* TRENDnet TEW-732BR */
+	ATH79_MACH_MC_MAC1200R,		/* MERCURY MAC1200R*/
+	ATH79_MACH_TL_MR10U,		/* TP-LINK TL-MR10U */
+	ATH79_MACH_TL_MR11U,		/* TP-LINK TL-MR11U */
+	ATH79_MACH_TL_MR13U,		/* TP-LINK TL-MR13U */
+	ATH79_MACH_TL_MR3020,		/* TP-LINK TL-MR3020 */
+	ATH79_MACH_TL_MR3040,		/* TP-LINK TL-MR3040 */
+	ATH79_MACH_TL_MR3040_V2,	/* TP-LINK TL-MR3040 v2 */
+	ATH79_MACH_TL_MR3220,		/* TP-LINK TL-MR3220 */
+	ATH79_MACH_TL_MR3220_V2,	/* TP-LINK TL-MR3220 v2 */
+	ATH79_MACH_TL_MR3420,		/* TP-LINK TL-MR3420 */
+	ATH79_MACH_TL_MR3420_V2,	/* TP-LINK TL-MR3420 v2 */
+	ATH79_MACH_TL_WA701ND_V2,       /* TP-LINK TL-WA701ND v2 */
+	ATH79_MACH_TL_WA750RE,		/* TP-LINK TL-WA750RE */
+       ATH79_MACH_TL_WA7210N_V2,       /* TP-LINK TL-WA7210N v2 */
+	ATH79_MACH_TL_WA7510N_V1,	/* TP-LINK TL-WA7510N v1*/
+	ATH79_MACH_TL_WA850RE,		/* TP-LINK TL-WA850RE */
+	ATH79_MACH_TL_WA860RE,		/* TP-LINK TL-WA860RE */
+	ATH79_MACH_TL_WA801ND_V2,	/* TP-LINK TL-WA801ND v2 */
+	ATH79_MACH_TL_WA830RE_V2,	/* TP-LINK TL-WA830RE v2 */
+	ATH79_MACH_TL_WA901ND,		/* TP-LINK TL-WA901ND */
+	ATH79_MACH_TL_WA901ND_V2,	/* TP-LINK TL-WA901ND v2 */
+	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
+	ATH79_MACH_TL_WDR3320_V2,	/* TP-LINK TL-WDR3320 v2 */
+	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
+	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
+	ATH79_MACH_TL_WDR6500_V2,	/* TP-LINK TL-WDR6500 v2 */
+	ATH79_MACH_TL_WDR4900_V2,	/* TP-LINK TL-WDR4900 v2 */
+	ATH79_MACH_TL_WR1041N_V2,	/* TP-LINK TL-WR1041N v2 */
+	ATH79_MACH_TL_WR1043ND,		/* TP-LINK TL-WR1043ND */
+	ATH79_MACH_TL_WR1043ND_V2,	/* TP-LINK TL-WR1043ND v2 */
+	ATH79_MACH_TL_WR2543N,		/* TP-LINK TL-WR2543N/ND */
+	ATH79_MACH_TL_WR703N,		/* TP-LINK TL-WR703N */
+	ATH79_MACH_TL_WR710N,		/* TP-LINK TL-WR710N */
+	ATH79_MACH_TL_WR720N_V3,	/* TP-LINK TL-WR720N v3/v4 */
+	ATH79_MACH_TL_WR741ND,		/* TP-LINK TL-WR741ND */
+	ATH79_MACH_TL_WR741ND_V4,	/* TP-LINK TL-WR741ND  v4*/
+	ATH79_MACH_TL_WR841N_V1,	/* TP-LINK TL-WR841N v1 */
+	ATH79_MACH_TL_WR841N_V7,	/* TP-LINK TL-WR841N/ND v7 */
+	ATH79_MACH_TL_WR841N_V8,	/* TP-LINK TL-WR841N/ND v8 */
+	ATH79_MACH_TL_WR841N_V9,	/* TP-LINK TL-WR841N/ND v9 */
+	ATH79_MACH_TL_WR842N_V2,	/* TP-LINK TL-WR842N/ND v2 */
+	ATH79_MACH_TL_WR941ND,		/* TP-LINK TL-WR941ND */
+	ATH79_MACH_TL_WR941ND_V5,	/* TP-LINK TL-WR941ND v5 */
+	ATH79_MACH_TL_WR941ND_V6,	/* TP-LINK TL-WR941ND v6 */
+	ATH79_MACH_TUBE2H,		/* Alfa Network Tube2H */
+	ATH79_MACH_UBNT_AIRGW,		/* Ubiquiti AirGateway */
+	ATH79_MACH_UBNT_AIRGWP,		/* Ubiquiti AirGateway Pro */
+	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
+	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
+	ATH79_MACH_UBNT_LOCO_M_XW, 	/* Ubiquiti Loco M XW */
+	ATH79_MACH_UBNT_LSSR71,		/* Ubiquiti LS-SR71 */
+	ATH79_MACH_UBNT_LSX,		/* Ubiquiti LSX */
+	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
+	ATH79_MACH_UBNT_NANO_M_XW, 	/* Ubiquiti NanoStation M XW */
+	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
+	ATH79_MACH_UBNT_ROCKET_M_XW,	/* Ubiquiti Rocket M XW*/
+	ATH79_MACH_UBNT_ROCKET_M_TI,	/* Ubiquiti Rocket M TI*/
+	ATH79_MACH_UBNT_RSPRO,		/* Ubiquiti RouterStation Pro */
+	ATH79_MACH_UBNT_RS,		/* Ubiquiti RouterStation */
+	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
+	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
+	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
+	ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
+	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
+	ATH79_MACH_WEIO,			/* WeIO board */
+	ATH79_MACH_WHR_G301N,		/* Buffalo WHR-G301N */
+	ATH79_MACH_WHR_HP_G300N,	/* Buffalo WHR-HP-G300N */
+	ATH79_MACH_WHR_HP_GN,		/* Buffalo WHR-HP-GN */
+	ATH79_MACH_WLAE_AG300N,		/* Buffalo WLAE-AG300N */
+	ATH79_MACH_WLR8100,		/* SITECOM WLR-8100 */
+	ATH79_MACH_WNDAP360,		/* NETGEAR WNDAP360 */
+	ATH79_MACH_WNDR3700,		/* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
+	ATH79_MACH_WNDR3700_V4,		/* NETGEAR WNDR3700v4 */
+	ATH79_MACH_WNDR4300,		/* NETGEAR WNDR4300 */
+	ATH79_MACH_WNR2000,		/* NETGEAR WNR2000 */
+	ATH79_MACH_WNR2000_V3,		/* NETGEAR WNR2000 v3 */
+	ATH79_MACH_WNR2000_V4,		/* NETGEAR WNR2000 v4 */
+	ATH79_MACH_WNR2200,		/* NETGEAR WNR2200 */
+	ATH79_MACH_WNR612_V2,		/* NETGEAR WNR612 v2 */
+	ATH79_MACH_WNR1000_V2,		/* NETGEAR WNR1000 v2 */
+	ATH79_MACH_WP543,		/* Compex WP543 */
+	ATH79_MACH_WPE72,		/* Compex WPE72 */
+	ATH79_MACH_WPJ344,		/* Compex WPJ344 */
+	ATH79_MACH_WPJ531,		/* Compex WPJ531 */
+	ATH79_MACH_WPJ558,		/* Compex WPJ558 */
+	ATH79_MACH_WRT160NL,		/* Linksys WRT160NL */
+	ATH79_MACH_WRT400N,		/* Linksys WRT400N */
+	ATH79_MACH_WZR_HP_AG300H,	/* Buffalo WZR-HP-AG300H */
+	ATH79_MACH_WZR_HP_G300NH,	/* Buffalo WZR-HP-G300NH */
+	ATH79_MACH_WZR_HP_G300NH2,	/* Buffalo WZR-HP-G300NH2 */
+	ATH79_MACH_WZR_HP_G450H,	/* Buffalo WZR-HP-G450H */
+	ATH79_MACH_WZR_450HP2,		/* Buffalo WZR-450HP2 */
+	ATH79_MACH_ZCN_1523H_2,		/* Zcomax ZCN-1523H-2-xx */
+	ATH79_MACH_ZCN_1523H_5,		/* Zcomax ZCN-1523H-5-xx */
+};
+
+#endif /* _ATH79_MACHTYPE_H */

target/linux/ar71xx/patches-4.1/602-MIPS-ath79-add-openwrt-stuff.patch

@@ -46,31 +46,3 @@
 +	def_bool n
 +
  endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI)			+= pci.o
- # Devices
- #
- obj-y					+= dev-common.o
-+obj-$(CONFIG_ATH79_DEV_AP9X_PCI)	+= dev-ap9x-pci.o
-+obj-$(CONFIG_ATH79_DEV_DSA)		+= dev-dsa.o
-+obj-$(CONFIG_ATH79_DEV_ETH)		+= dev-eth.o
- obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
- obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
-+obj-$(CONFIG_ATH79_DEV_M25P80)		+= dev-m25p80.o
-+obj-$(CONFIG_ATH79_DEV_NFC)		+= dev-nfc.o
- obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
- obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
- obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
- 
- #
-+# Miscellaneous objects
-+#
-+obj-$(CONFIG_ATH79_NVRAM)		+= nvram.o
-+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= pci-ath9k-fixup.o
-+obj-$(CONFIG_ATH79_ROUTERBOOT)		+= routerboot.o
-+
-+#
- # Machines
- #
- obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o

target/linux/ar71xx/patches-4.1/603-MIPS-ath79-ap121-fixes.patch

@@ -147,13 +147,3 @@
  	select ATH79_DEV_USB
  	select ATH79_DEV_WMAC
  	help
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -17,6 +17,7 @@
- enum ath79_mach_type {
- 	ATH79_MACH_GENERIC = 0,
- 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
-+	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
- 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
- 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
- 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */

target/linux/ar71xx/patches-4.1/608-MIPS-ath79-ubnt-xm-add-more-boards.patch

@@ -639,21 +639,3 @@
  	help
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -22,6 +22,15 @@ enum ath79_mach_type {
- 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
- 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
- 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
-+	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
-+	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
-+	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
-+	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
-+	ATH79_MACH_UBNT_ROCKET_M_XW,	/* Ubiquiti Rocket M XW*/
-+	ATH79_MACH_UBNT_ROCKET_M_TI,	/* Ubiquiti Rocket M TI*/
-+	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
-+	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
-+	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
- 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
- };
- 

target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch

@@ -276,18 +276,6 @@
 +MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
 +	     "Atheros AP135-020 reference board",
 +	     ap135_020_setup);
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -18,7 +18,9 @@ enum ath79_mach_type {
- 	ATH79_MACH_GENERIC = 0,
- 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
- 	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
-+	ATH79_MACH_AP135_020,		/* Atheros AP135-020 reference board */
- 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
-+	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
- 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
- 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
- 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
 --- a/arch/mips/ath79/Kconfig
 +++ b/arch/mips/ath79/Kconfig
 @@ -16,16 +16,17 @@ config ATH79_MACH_AP121

target/linux/ar71xx/patches-4.1/700-MIPS-ath79-add-openwrt-Kconfig.patch

@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -83,6 +83,8 @@ config ATH79_MACH_UBNT_XM
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Ubiquiti Networks XM (rev 1.0) board.
+ 
++source "arch/mips/ath79/Kconfig.openwrt"
++
+ endmenu
+ 
+ config SOC_AR71XX

target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch

@@ -1,1761 +0,0 @@
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,213 @@
- 
- enum ath79_mach_type {
- 	ATH79_MACH_GENERIC = 0,
-+	ATH79_MACH_ALFA_AP96,		/* ALFA Network AP96 board */
-+	ATH79_MACH_ALFA_NX,		/* ALFA Network N2/N5 board */
-+	ATH79_MACH_ALL0258N,		/* Allnet ALL0258N */
-+	ATH79_MACH_ALL0305,		/* Allnet ALL0305 */
-+	ATH79_MACH_ALL0315N,		/* Allnet ALL0315N */
-+	ATH79_MACH_ANTMINER_S1,	/* Antminer S1 */
-+	ATH79_MACH_ANTMINER_S3,	/* Antminer S3 */
-+	ATH79_MACH_AP113,		/* Atheros AP113 reference board */
- 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
- 	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
-+	ATH79_MACH_AP132,		/* Atheros AP132 reference board */
- 	ATH79_MACH_AP135_020,		/* Atheros AP135-020 reference board */
- 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
- 	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
-+	ATH79_MACH_AP143,		/* Atheros AP143 reference board */
- 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
-+	ATH79_MACH_AP83,		/* Atheros AP83 */
-+	ATH79_MACH_AP96,		/* Atheros AP96 */
-+	ATH79_MACH_ARCHER_C5,		/* TP-LINK Archer C5 board */
-+	ATH79_MACH_ARCHER_C7,		/* TP-LINK Archer C7 board */
-+	ATH79_MACH_AW_NR580,		/* AzureWave AW-NR580 */
-+	ATH79_MACH_BHU_BXU2000N2_A1,	/* BHU BXU2000n-2 A1 */
-+	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
-+	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
-+	ATH79_MACH_CF_E316N_V2,		/* COMFAST CF-E316N v2 */
-+	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
- 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
- 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
-+	ATH79_MACH_DGL_5500_A1,		/* D-link DGL-5500 rev. A1 */
-+	ATH79_MACH_DHP_1565_A1,		/* D-Link DHP-1565 rev. A1 */
-+	ATH79_MACH_DIR_505_A1,		/* D-Link DIR-505 rev. A1 */
-+	ATH79_MACH_DIR_600_A1,		/* D-Link DIR-600 rev. A1 */
-+	ATH79_MACH_DIR_615_C1,		/* D-Link DIR-615 rev. C1 */
-+	ATH79_MACH_DIR_615_E1,		/* D-Link DIR-615 rev. E1 */
-+	ATH79_MACH_DIR_615_E4,		/* D-Link DIR-615 rev. E4 */
-+	ATH79_MACH_DIR_615_I1,		/* D-Link DIR-615 rev. I1 */
-+	ATH79_MACH_DIR_825_B1,		/* D-Link DIR-825 rev. B1 */
-+	ATH79_MACH_DIR_825_C1,		/* D-Link DIR-825 rev. C1 */
-+	ATH79_MACH_DIR_835_A1,		/* D-Link DIR-835 rev. A1 */
-+	ATH79_MACH_DLAN_HOTSPOT,	/* devolo dLAN Hotspot */
-+	ATH79_MACH_DLAN_PRO_500_WP,	/* devolo dLAN pro 500 Wireless+ */
-+	ATH79_MACH_DLAN_PRO_1200_AC,	/* devolo dLAN pro 1200+ WiFi ac*/
-+	ATH79_MACH_DRAGINO2,		/* Dragino Version 2 */
-+	ATH79_MACH_ESR900,		/* EnGenius ESR900 */
-+	ATH79_MACH_EW_DORIN,		/* embedded wireless Dorin Platform */
-+	ATH79_MACH_EW_DORIN_ROUTER,	/* embedded wireless Dorin Router Platform */
-+	ATH79_MACH_EAP300V2,		/* EnGenius EAP300 v2 */
-+	ATH79_MACH_EAP7660D,		/* Senao EAP7660D */
-+	ATH79_MACH_EL_M150,		/* EasyLink EL-M150 */
-+	ATH79_MACH_EL_MINI,		/* EasyLink EL-MINI */
-+	ATH79_MACH_ESR1750,		/* EnGenius ESR1750 */
-+	ATH79_MACH_EPG5000,		/* EnGenius EPG5000 */
-+	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
-+	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
-+	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
-+	ATH79_MACH_HIWIFI_HC6361,	/* HiWiFi HC6361 */
-+	ATH79_MACH_JA76PF,		/* jjPlus JA76PF */
-+	ATH79_MACH_JA76PF2,		/* jjPlus JA76PF2 */
-+	ATH79_MACH_JWAP003,		/* jjPlus JWAP003 */
-+	ATH79_MACH_HORNET_UB,		/* ALFA Networks Hornet-UB */
-+	ATH79_MACH_MR12,		/* Cisco Meraki MR12 */
-+	ATH79_MACH_MR16,		/* Cisco Meraki MR16 */
-+	ATH79_MACH_MR600V2,		/* OpenMesh MR600v2 */
-+	ATH79_MACH_MR600,		/* OpenMesh MR600 */
-+	ATH79_MACH_MR900,		/* OpenMesh MR900 */
-+	ATH79_MACH_MR900v2,		/* OpenMesh MR900v2 */
-+	ATH79_MACH_MYNET_N600,		/* WD My Net N600 */
-+	ATH79_MACH_MYNET_N750,		/* WD My Net N750 */
-+	ATH79_MACH_MYNET_REXT,		/* WD My Net Wi-Fi Range Extender */
-+	ATH79_MACH_MZK_W04NU,		/* Planex MZK-W04NU */
-+	ATH79_MACH_MZK_W300NH,		/* Planex MZK-W300NH */
-+	ATH79_MACH_NBG460N,		/* Zyxel NBG460N/550N/550NH */
-+	ATH79_MACH_NBG6616,		/* Zyxel NBG6616 */
-+	ATH79_MACH_NBG6716,		/* Zyxel NBG6716 */
-+	ATH79_MACH_OM2P_HSv2,		/* OpenMesh OM2P-HSv2 */
-+	ATH79_MACH_OM2P_HS,		/* OpenMesh OM2P-HS */
-+	ATH79_MACH_OM2P_LC,		/* OpenMesh OM2P-LC */
-+	ATH79_MACH_OM2Pv2,		/* OpenMesh OM2Pv2 */
-+	ATH79_MACH_OM2P,		/* OpenMesh OM2P */
-+	ATH79_MACH_OM5P_AN,		/* OpenMesh OM5P-AN */
-+	ATH79_MACH_OM5P,		/* OpenMesh OM5P */
-+	ATH79_MACH_ONION_OMEGA,		/* ONION OMEGA */
-+	ATH79_MACH_PB42,		/* Atheros PB42 */
-+	ATH79_MACH_PB92,		/* Atheros PB92 */
-+	ATH79_MACH_QIHOO_C301,		/* Qihoo 360 C301 */
-+	ATH79_MACH_R6100,		/* NETGEAR R6100 */
-+	ATH79_MACH_RB_411,		/* MikroTik RouterBOARD 411/411A/411AH */
-+	ATH79_MACH_RB_411U,		/* MikroTik RouterBOARD 411U */
-+	ATH79_MACH_RB_433,		/* MikroTik RouterBOARD 433/433AH */
-+	ATH79_MACH_RB_433U,		/* MikroTik RouterBOARD 433UAH */
-+	ATH79_MACH_RB_435G,		/* MikroTik RouterBOARD 435G */
-+	ATH79_MACH_RB_450G,		/* MikroTik RouterBOARD 450G */
-+	ATH79_MACH_RB_450,		/* MikroTik RouterBOARD 450 */
-+	ATH79_MACH_RB_493,		/* Mikrotik RouterBOARD 493/493AH */
-+	ATH79_MACH_RB_493G,		/* Mikrotik RouterBOARD 493G */
-+	ATH79_MACH_RB_711GR100,		/* Mikrotik RouterBOARD 911/912 boards */
-+	ATH79_MACH_RB_750,		/* MikroTik RouterBOARD 750 */
-+	ATH79_MACH_RB_750G_R3,		/* MikroTik RouterBOARD 750GL */
-+	ATH79_MACH_RB_751,		/* MikroTik RouterBOARD 751 */
-+	ATH79_MACH_RB_751G,		/* Mikrotik RouterBOARD 751G */
-+	ATH79_MACH_RB_922GS,		/* Mikrotik RouterBOARD 911/922GS boards */
-+	ATH79_MACH_RB_951G,		/* Mikrotik RouterBOARD 951G */
-+	ATH79_MACH_RB_951U,		/* Mikrotik RouterBOARD 951Ui-2HnD */
-+	ATH79_MACH_RB_2011G,		/* Mikrotik RouterBOARD 2011UAS-2HnD */
-+	ATH79_MACH_RB_2011L,		/* Mikrotik RouterBOARD 2011L */
-+	ATH79_MACH_RB_2011US,		/* Mikrotik RouterBOARD 2011UAS */
-+	ATH79_MACH_RB_2011R5,		/* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
-+	ATH79_MACH_RB_SXTLITE2ND,	/* Mikrotik RouterBOARD SXT Lite 2nD */
-+	ATH79_MACH_RB_SXTLITE5ND,	/* Mikrotik RouterBOARD SXT Lite 5nD */
-+	ATH79_MACH_RW2458N,		/* Redwave RW2458N */
-+	ATH79_MACH_SMART_300,		/* NC-LINK SMART-300 */
-+	ATH79_MACH_TEW_632BRP,		/* TRENDnet TEW-632BRP */
-+	ATH79_MACH_TEW_673GRU,		/* TRENDnet TEW-673GRU */
-+	ATH79_MACH_TEW_712BR,		/* TRENDnet TEW-712BR */
-+	ATH79_MACH_TEW_732BR,		/* TRENDnet TEW-732BR */
-+	ATH79_MACH_MC_MAC1200R,		/* MERCURY MAC1200R*/
-+	ATH79_MACH_TL_MR10U,		/* TP-LINK TL-MR10U */
-+	ATH79_MACH_TL_MR11U,		/* TP-LINK TL-MR11U */
-+	ATH79_MACH_TL_MR13U,		/* TP-LINK TL-MR13U */
-+	ATH79_MACH_TL_MR3020,		/* TP-LINK TL-MR3020 */
-+	ATH79_MACH_TL_MR3040,		/* TP-LINK TL-MR3040 */
-+	ATH79_MACH_TL_MR3040_V2,	/* TP-LINK TL-MR3040 v2 */
-+	ATH79_MACH_TL_MR3220,		/* TP-LINK TL-MR3220 */
-+	ATH79_MACH_TL_MR3220_V2,	/* TP-LINK TL-MR3220 v2 */
-+	ATH79_MACH_TL_MR3420,		/* TP-LINK TL-MR3420 */
-+	ATH79_MACH_TL_MR3420_V2,	/* TP-LINK TL-MR3420 v2 */
-+	ATH79_MACH_TL_WA701ND_V2,       /* TP-LINK TL-WA701ND v2 */
-+	ATH79_MACH_TL_WA750RE,		/* TP-LINK TL-WA750RE */
-+       ATH79_MACH_TL_WA7210N_V2,       /* TP-LINK TL-WA7210N v2 */
-+	ATH79_MACH_TL_WA7510N_V1,	/* TP-LINK TL-WA7510N v1*/
-+	ATH79_MACH_TL_WA850RE,		/* TP-LINK TL-WA850RE */
-+	ATH79_MACH_TL_WA860RE,		/* TP-LINK TL-WA860RE */
-+	ATH79_MACH_TL_WA801ND_V2,	/* TP-LINK TL-WA801ND v2 */
-+	ATH79_MACH_TL_WA830RE_V2,	/* TP-LINK TL-WA830RE v2 */
-+	ATH79_MACH_TL_WA901ND,		/* TP-LINK TL-WA901ND */
-+	ATH79_MACH_TL_WA901ND_V2,	/* TP-LINK TL-WA901ND v2 */
-+	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
-+	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
-+	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
-+	ATH79_MACH_TL_WDR4900_V2,	/* TP-LINK TL-WDR4900 v2 */
-+	ATH79_MACH_TL_WR1041N_V2,	/* TP-LINK TL-WR1041N v2 */
-+	ATH79_MACH_TL_WR1043ND,		/* TP-LINK TL-WR1043ND */
-+	ATH79_MACH_TL_WR1043ND_V2,	/* TP-LINK TL-WR1043ND v2 */
-+	ATH79_MACH_TL_WR2543N,		/* TP-LINK TL-WR2543N/ND */
-+	ATH79_MACH_TL_WR703N,		/* TP-LINK TL-WR703N */
-+	ATH79_MACH_TL_WR710N,		/* TP-LINK TL-WR710N */
-+	ATH79_MACH_TL_WR720N_V3,	/* TP-LINK TL-WR720N v3/v4 */
-+	ATH79_MACH_TL_WR741ND,		/* TP-LINK TL-WR741ND */
-+	ATH79_MACH_TL_WR741ND_V4,	/* TP-LINK TL-WR741ND  v4*/
-+	ATH79_MACH_TL_WR841N_V1,	/* TP-LINK TL-WR841N v1 */
-+	ATH79_MACH_TL_WR841N_V7,	/* TP-LINK TL-WR841N/ND v7 */
-+	ATH79_MACH_TL_WR841N_V8,	/* TP-LINK TL-WR841N/ND v8 */
-+	ATH79_MACH_TL_WR841N_V9,	/* TP-LINK TL-WR841N/ND v9 */
-+	ATH79_MACH_TL_WR842N_V2,	/* TP-LINK TL-WR842N/ND v2 */
-+	ATH79_MACH_TL_WR941ND,		/* TP-LINK TL-WR941ND */
-+	ATH79_MACH_TL_WR941ND_V5,	/* TP-LINK TL-WR941ND v5 */
-+	ATH79_MACH_TL_WR941ND_V6,	/* TP-LINK TL-WR941ND v6 */
-+	ATH79_MACH_TUBE2H,		/* Alfa Network Tube2H */
-+	ATH79_MACH_UBNT_AIRGW,		/* Ubiquiti AirGateway */
-+	ATH79_MACH_UBNT_AIRGWP,		/* Ubiquiti AirGateway Pro */
- 	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
- 	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
-+	ATH79_MACH_UBNT_LOCO_M_XW, 	/* Ubiquiti Loco M XW */
-+	ATH79_MACH_UBNT_LSSR71,		/* Ubiquiti LS-SR71 */
-+	ATH79_MACH_UBNT_LSX,		/* Ubiquiti LSX */
- 	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
-+	ATH79_MACH_UBNT_NANO_M_XW, 	/* Ubiquiti NanoStation M XW */
- 	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
- 	ATH79_MACH_UBNT_ROCKET_M_XW,	/* Ubiquiti Rocket M XW*/
- 	ATH79_MACH_UBNT_ROCKET_M_TI,	/* Ubiquiti Rocket M TI*/
-+	ATH79_MACH_UBNT_RSPRO,		/* Ubiquiti RouterStation Pro */
-+	ATH79_MACH_UBNT_RS,		/* Ubiquiti RouterStation */
- 	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
- 	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
- 	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
-+	ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
- 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
-+	ATH79_MACH_WEIO,			/* WeIO board */
-+	ATH79_MACH_WHR_G301N,		/* Buffalo WHR-G301N */
-+	ATH79_MACH_WHR_HP_G300N,	/* Buffalo WHR-HP-G300N */
-+	ATH79_MACH_WHR_HP_GN,		/* Buffalo WHR-HP-GN */
-+	ATH79_MACH_WLAE_AG300N,		/* Buffalo WLAE-AG300N */
-+	ATH79_MACH_WLR8100,		/* SITECOM WLR-8100 */
-+	ATH79_MACH_WNDAP360,		/* NETGEAR WNDAP360 */
-+	ATH79_MACH_WNDR3700,		/* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
-+	ATH79_MACH_WNDR3700_V4,		/* NETGEAR WNDR3700v4 */
-+	ATH79_MACH_WNDR4300,		/* NETGEAR WNDR4300 */
-+	ATH79_MACH_WNR2000,		/* NETGEAR WNR2000 */
-+	ATH79_MACH_WNR2000_V3,		/* NETGEAR WNR2000 v3 */
-+	ATH79_MACH_WNR2000_V4,		/* NETGEAR WNR2000 v4 */
-+	ATH79_MACH_WNR2200,		/* NETGEAR WNR2200 */
-+	ATH79_MACH_WNR612_V2,		/* NETGEAR WNR612 v2 */
-+	ATH79_MACH_WNR1000_V2,		/* NETGEAR WNR1000 v2 */
-+	ATH79_MACH_WP543,		/* Compex WP543 */
-+	ATH79_MACH_WPE72,		/* Compex WPE72 */
-+	ATH79_MACH_WPJ344,		/* Compex WPJ344 */
-+	ATH79_MACH_WPJ531,		/* Compex WPJ531 */
-+	ATH79_MACH_WPJ558,		/* Compex WPJ558 */
-+	ATH79_MACH_WRT160NL,		/* Linksys WRT160NL */
-+	ATH79_MACH_WRT400N,		/* Linksys WRT400N */
-+	ATH79_MACH_WZR_HP_AG300H,	/* Buffalo WZR-HP-AG300H */
-+	ATH79_MACH_WZR_HP_G300NH,	/* Buffalo WZR-HP-G300NH */
-+	ATH79_MACH_WZR_HP_G300NH2,	/* Buffalo WZR-HP-G300NH2 */
-+	ATH79_MACH_WZR_HP_G450H,	/* Buffalo WZR-HP-G450H */
-+	ATH79_MACH_WZR_450HP2,		/* Buffalo WZR-450HP2 */
-+	ATH79_MACH_ZCN_1523H_2,		/* Zcomax ZCN-1523H-2-xx */
-+	ATH79_MACH_ZCN_1523H_5,		/* Zcomax ZCN-1523H-5-xx */
- };
- 
- #endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -2,6 +2,90 @@ if ATH79
- 
- menu "Atheros AR71XX/AR724X/AR913X machine selection"
- 
-+config ATH79_MACH_ALFA_AP96
-+	bool "ALFA Network AP96 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_HORNET_UB
-+	bool "ALFA Network Hornet-UB board support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_ALFA_NX
-+	bool "ALFA Network N2/N5 board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TUBE2H
-+	bool "ALFA Network Tube2H board support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_ALL0258N
-+	bool "Allnet ALL0258N support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ALL0315N
-+	bool "Allnet ALL0315N support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ANTMINER_S1
-+	bool "Bitmain Antminer S1 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_ANTMINER_S3
-+	bool "Bitmain Antminer S3 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_AP113
-+	bool "Atheros AP113 board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_PB9X_PCI if PCI
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_ETH
-+
- config ATH79_MACH_AP121
- 	bool "Atheros AP121 reference board"
- 	select SOC_AR933X
-@@ -11,62 +95,1125 @@ config ATH79_MACH_AP121
- 	select ATH79_DEV_M25P80
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP121 reference board.
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Atheros AP121 reference board.
-+
-+config ATH79_MACH_AP132
-+	bool "Atheros AP132 reference board"
-+	select SOC_QCA955X
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Atheros AP132 reference boards.
-+
-+config ATH79_MACH_AP136
-+	bool "Atheros AP136/AP135 reference board"
-+	select SOC_QCA955X
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Atheros AP136 or AP135 reference boards.
-+
-+config ATH79_MACH_AP143
-+	bool "Atheros AP143 reference board"
-+	select SOC_QCA953X
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_SPI
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_M25P80
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Atheros AP143 reference board.
-+
-+config ATH79_MACH_AP81
-+	bool "Atheros AP81 reference board"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Atheros AP81 reference board.
-+
-+config ATH79_MACH_AP83
-+	bool "Atheros AP83 board support"
-+	select SOC_AR913X
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_AP96
-+	bool "Atheros AP96 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_DB120
-+	bool "Atheros DB120 reference board"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Atheros DB120 reference board.
-+
-+config ATH79_MACH_PB42
-+	bool "Atheros PB42 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_PB44
-+	bool "Atheros PB44 reference board"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_SPI
-+	select ATH79_DEV_USB
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Atheros PB44 reference board.
-+
-+config ATH79_MACH_PB92
-+	bool "Atheros PB92 board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_PB9X_PCI if PCI
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_AW_NR580
-+	bool "AzureWave AW-NR580 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_F9K1115V2
-+	bool "Belkin AC1750DB board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_EPG5000
-+	bool "EnGenius EPG5000 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_ESR1750
-+	bool "EnGenius ESR1750 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WHR_HP_G300N
-+	bool "Buffalo WHR-HP-G300N board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WLAE_AG300N
-+	bool "Buffalo WLAE-AG300N board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WLR8100
-+	bool "Sitecom WLR-8100 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WZR_HP_AG300H
-+	bool "Buffalo WZR-HP-AG300H board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_WZR_HP_G300NH
-+	bool "Buffalo WZR-HP-G300NH board support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	select RTL8366_SMI
-+
-+config ATH79_MACH_WZR_HP_G300NH2
-+	bool "Buffalo WZR-HP-G300NH2 board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_WZR_HP_G450H
-+	bool "Buffalo WZR-HP-G450H board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_WZR_450HP2
-+	bool "Buffalo WZR-450HP2 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WP543
-+	bool "Compex WP543/WPJ543 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select MYLOADER
-+
-+config ATH79_MACH_WPE72
-+	bool "Compex WPE72/WPE72NX board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select MYLOADER
-+
-+config ATH79_MACH_WPJ344
-+	bool "Compex WPJ344 board support"
-+	select SOC_AS934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WPJ531
-+       bool "Compex WPJ531 board support"
-+       select SOC_QCA953X
-+       select ATH79_DEV_ETH
-+       select ATH79_DEV_GPIO_BUTTONS
-+       select ATH79_DEV_LEDS_GPIO
-+       select ATH79_DEV_M25P80
-+       select ATH79_DEV_USB
-+       select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WPJ558
-+	bool "Compex WPJ558 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_DGL_5500_A1
-+	bool "D-Link DGL-5500 A1 support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_DHP_1565_A1
-+	bool "D-Link DHP-1565 rev. A1 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_DIR_505_A1
-+	bool "D-Link DIR-505-A1 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_600_A1
-+	bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_615_C1
-+	bool "D-Link DIR-615 rev. C1 support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_615_I1
-+	bool "D-Link DIR-615 rev. I1 support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_825_B1
-+	bool "D-Link DIR-825 rev. B1 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_DIR_825_C1
-+	bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_DLAN_HOTSPOT
-+	bool "devolo dLAN Hotspot support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_DLAN_PRO_500_WP
-+	bool "devolo dLAN pro 500 Wireless+ support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_SPI
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_DLAN_PRO_1200_AC
-+	bool "devolo dLAN pro 1200+ WiFi ac support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_SPI
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_DRAGINO2
-+	bool "DRAGINO V2 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_ESR900
-+	bool "EnGenius ESR900 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_EW_DORIN
-+	bool "embedded wireless Dorin Platform support"
-+	select SOC_AR933X
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_ETH
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Dorin Platform from www.80211.de .
-+
-+config ATH79_MACH_EL_M150
-+	bool "EasyLink EL-M150 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_EL_MINI
-+	bool "EasyLink EL-MINI support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_GL_INET
-+	bool "GL-INET support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_EAP300V2
-+	bool "EnGenius EAP300 v2 support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_GS_OOLITE
-+       bool "GS Oolite V1 support"
-+       select SOC_AR933X
-+       select ARH79_DEV_ETH
-+       select ARH79_DEV_GPIO_BUTTONS
-+       select ATH79_DEV_LEDS_GPIO
-+       select ATH79_DEV_M25P80
-+       select ATH79_DEV_USB
-+       select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_HIWIFI_HC6361
-+	bool "HiWiFi HC6361 board support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_JA76PF
-+	bool "jjPlus JA76PF board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_JWAP003
-+	bool "jjPlus JWAP003 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_WRT160NL
-+	bool "Linksys WRT160NL board support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_WRT400N
-+	bool "Linksys WRT400N board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_R6100
-+	bool "NETGEAR R6100 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MC_MAC1200R
-+	bool "MERCURY MAC1200R board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_RB4XX
-+	bool "MikroTik RouterBOARD 4xx series support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_RB750
-+	bool "MikroTik RouterBOARD 750 support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_USB
-+	select ATH79_ROUTERBOOT
-+
-+config ATH79_MACH_RB91X
-+	bool "MikroTik RouterBOARD 91X support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_SPI
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_USB
-+	select ATH79_ROUTERBOOT
-+
-+config ATH79_MACH_RB922
-+	bool "MikroTik RouterBOARD 922 support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_USB
-+	select ATH79_ROUTERBOOT
-+	select RLE_DECOMPRESS
-+
-+config ATH79_MACH_RB95X
-+       bool "MikroTik RouterBOARD 95X support"
-+       select SOC_AR934X
-+       select ATH79_DEV_ETH
-+       select ATH79_DEV_NFC
-+       select ATH79_DEV_WMAC
-+       select ATH79_DEV_USB
-+       select ATH79_ROUTERBOOT
-+
-+config ATH79_MACH_RB2011
-+	bool "MikroTik RouterBOARD 2011 support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	select ATH79_ROUTERBOOT
-+
-+config ATH79_MACH_RBSXTLITE
-+	bool "MikroTik RouterBOARD SXT Lite"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_WMAC
-+	select ATH79_ROUTERBOOT
-+
-+config ATH79_MACH_SMART_300
-+	bool "NC-LINK SMART-300 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WNDAP360
-+	bool "NETGEAR WNDAP360 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WNDR3700
-+	bool "NETGEAR WNDR3700 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_WNDR4300
-+	bool "NETGEAR WNDR3700v4/WNDR4300 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WNR2000
-+	bool "NETGEAR WNR2000 board support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WNR2000_V3
-+	bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+	config ATH79_MACH_WNR2200
-+	bool "NETGEAR WNR2200 board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_WNR2000_V4
-+	bool "NETGEAR WNR2000 V4"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_OM2P
-+	bool "OpenMesh OM2P board support"
-+	select SOC_AR724X
-+	select SOC_AR933X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_OM5P
-+	bool "OpenMesh OM5P board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_ONION_OMEGA
-+	bool "ONION OMEGA support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MR12
-+	bool "Meraki MR12 board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MR16
-+	bool "Meraki MR16 board support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MR600
-+	bool "OpenMesh MR600 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MZK_W04NU
-+	bool "Planex MZK-W04NU board support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MZK_W300NH
-+	bool "Planex MZK-W300NH board support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_RW2458N
-+	bool "Redwave RW2458N board support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_CAP4200AG
-+	bool "Senao CAP4200AG support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MR900
-+	bool "OpenMesh MR900 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_EAP7660D
-+	bool "Senao EAP7660D support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ARCHER_C7
-+	bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_CPE510
-+	bool "TP-LINK CPE510 support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR11U
-+	bool "TP-LINK TL-MR11U/TL-MR3040 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR13U
-+	bool "TP-LINK TL-MR13U support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR3020
-+	bool "TP-LINK TL-MR3020 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR3X20
-+	bool "TP-LINK TL-MR3220/3420 support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_TL_WAX50RE
-+	bool "TP-LINK TL-WA750/850RE support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WA701ND_V2
-+	bool "TP-LINK TL-WA701ND v2 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WA7210N_V2
-+       bool "TP-LINK TL-WA7210N v2 support"
-+       select SOC_AR724X
-+       select ATH79_DEV_AP9X_PCI if PCI
-+       select ATH79_DEV_ETH
-+       select ATH79_DEV_LEDS_GPIO
-+       select ATH79_DEV_GPIO_BUTTONS
-+       select ATH79_DEV_M25P80
-+       select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WA830RE_V2
-+	bool "TP-LINK TL-WA830RE v2 support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WA901ND
-+	bool "TP-LINK TL-WA901ND/TL-WA7510N support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WA901ND_V2
-+	bool "TP-LINK TL-WA901ND v2 support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WDR3500
-+	bool "TP-LINK TL-WDR3500 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WDR4300
-+	bool "TP-LINK TL-WDR3600/4300/4310 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR703N
-+	bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
- 
--config ATH79_MACH_AP136
--	bool "Atheros AP136/AP135 reference board"
--	select SOC_QCA955X
-+config ATH79_MACH_TL_WR720N_V3
-+	bool "TP-LINK TL-WR720N v3/v4 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_NFC
--	select ATH79_DEV_SPI
-+	select ATH79_DEV_M25P80
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP136 or AP135 reference boards.
- 
--config ATH79_MACH_AP81
--	bool "Atheros AP81 reference board"
--	select SOC_AR913X
-+config ATH79_MACH_TL_WR741ND
-+	bool "TP-LINK TL-WR741ND support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WR741ND_V4
-+	bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
-+	select SOC_AR933X
- 	select ATH79_DEV_ETH
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
- 	select ATH79_DEV_M25P80
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP81 reference board.
- 
--config ATH79_MACH_DB120
--	bool "Atheros DB120 reference board"
-+config ATH79_MACH_TL_WR841N_V1
-+	bool "TP-LINK TL-WR841N v1 support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_DSA
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WR841N_V8
-+	bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR841N_V9
-+       bool "TP-LINK TL-WR841N/ND v9 support"
-+       select SOC_QCA953X
-+       select ATH79_DEV_ETH
-+       select ATH79_DEV_GPIO_BUTTONS
-+       select ATH79_DEV_LEDS_GPIO
-+       select ATH79_DEV_M25P80
-+       select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR941ND
-+	bool "TP-LINK TL-WR941ND support"
-+	select SOC_AR913X
-+	select ATH79_DEV_DSA
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR941ND_V6
-+	bool "TP-LINK TL-WR941ND v6 support"
-+	select SOC_QCA956X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR1041N_V2
-+	bool "TP-LINK TL-WR1041N v2 support"
- 	select SOC_AR934X
- 	select ATH79_DEV_AP9X_PCI if PCI
- 	select ATH79_DEV_ETH
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
- 	select ATH79_DEV_M25P80
--	select ATH79_DEV_NFC
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros DB120 reference board.
- 
--config ATH79_MACH_PB44
--	bool "Atheros PB44 reference board"
-+config ATH79_MACH_TL_WR1043ND
-+	bool "TP-LINK TL-WR1043ND support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR1043ND_V2
-+	bool "TP-LINK TL-WR1043ND v2 support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR2543N
-+	bool "TP-LINK TL-WR2543N/ND support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+
-+config ATH79_MACH_TEW_632BRP
-+	bool "TRENDnet TEW-632BRP support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_673GRU
-+	bool "TRENDnet TEW-673GRU support"
- 	select SOC_AR71XX
-+	select ATH79_DEV_AP9X_PCI if PCI
- 	select ATH79_DEV_ETH
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_712BR
-+	bool "TRENDnet TEW-712BR support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_732BR
-+	bool "TRENDnet TEW-732BR support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_UBNT
-+	bool "Ubiquiti AR71xx based boards support"
-+	select SOC_AR71XX
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
- 	select ATH79_DEV_USB
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros PB44 reference board.
- 
- config ATH79_MACH_UBNT_XM
- 	bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1230,116 @@ config ATH79_MACH_UBNT_XM
- 	  Say 'Y' here if you want your kernel to support the
- 	  Ubiquiti Networks XM (rev 1.0) board.
- 
-+config ATH79_MACH_WEIO
-+	bool "WeIO board"
-+	select SOC_AR933X
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MYNET_N600
-+	bool "WD My Net N600 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_MYNET_N750
-+	bool "WD My Net N750 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_MYNET_REXT
-+	bool "WD My Net Wi-Fi Range Extender board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_NVRAM
-+
-+config ATH79_MACH_ZCN_1523H
-+	bool "Zcomax ZCN-1523H support"
-+	select SOC_AR724X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_NBG460N
-+	bool "Zyxel NBG460N/550N/550NH board support"
-+	select SOC_AR913X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_NBG6716
-+	bool "Zyxel NBG6616/NBG6716 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_NFC
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_CARAMBOLA2
-+	bool "8devices Carambola2 board"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_CF_E316N_V2
-+	bool "COMFAST CF-E316N v2 board"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_BHU_BXU2000N2_A
-+	bool "BHU BXU2000n-2 rev. A support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_QIHOO_C301
-+	bool "Qihoo 360 C301 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_USB
-+	select ATH79_NVRAM
-+
- endmenu
- 
- config SOC_AR71XX
-@@ -134,7 +1391,10 @@ config ATH79_DEV_DSA
- config ATH79_DEV_ETH
- 	def_bool n
- 
--config PCI_AR724X
-+config ATH79_DEV_DSA
-+	def_bool n
-+
-+config ATH79_DEV_ETH
- 	def_bool n
- 
- config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1424,11 @@ config ATH79_PCI_ATH9K_FIXUP
- 	def_bool n
- 
- config ATH79_ROUTERBOOT
-+	select RLE_DECOMPRESS
-+	select LZO_DECOMPRESS
-+	def_bool n
-+
-+config PCI_AR724X
- 	def_bool n
- 
- endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,137 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= route
- #
- # Machines
- #
-+obj-$(CONFIG_ATH79_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
-+obj-$(CONFIG_ATH79_MACH_ALFA_NX)	+= mach-alfa-nx.o
-+obj-$(CONFIG_ATH79_MACH_ALL0258N)	+= mach-all0258n.o
-+obj-$(CONFIG_ATH79_MACH_ALL0315N)	+= mach-all0315n.o
-+obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
-+obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
-+obj-$(CONFIG_ATH79_MACH_AP113)		+= mach-ap113.o
- obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
-+obj-$(CONFIG_ATH79_MACH_AP132)		+= mach-ap132.o
- obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
-+obj-$(CONFIG_ATH79_MACH_AP143)		+= mach-ap143.o
- obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
-+obj-$(CONFIG_ATH79_MACH_AP83)		+= mach-ap83.o
-+obj-$(CONFIG_ATH79_MACH_AP96)		+= mach-ap96.o
-+obj-$(CONFIG_ATH79_MACH_ARCHER_C7)	+= mach-archer-c7.o
-+obj-$(CONFIG_ATH79_MACH_AW_NR580)	+= mach-aw-nr580.o
-+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
-+obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
-+obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)	+= mach-cf-e316n-v2.o
-+obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
- obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
-+obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT)	+= mach-dlan-hotspot.o
-+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)	+= mach-dlan-pro-500-wp.o
-+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC)	+= mach-dlan-pro-1200-ac.o
-+obj-$(CONFIG_ATH79_MACH_DGL_5500_A1)	+= mach-dgl-5500-a1.o
-+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)	+= mach-dhp-1565-a1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_505_A1)	+= mach-dir-505-a1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_615_I1)	+= mach-dir-615-i1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_825_C1)	+= mach-dir-825-c1.o
-+obj-$(CONFIG_ATH79_MACH_DRAGINO2)	+= mach-dragino2.o
-+obj-$(CONFIG_ATH79_MACH_ESR900)	+= mach-esr900.o
-+obj-$(CONFIG_ATH79_MACH_EW_DORIN)	+= mach-ew-dorin.o
-+obj-$(CONFIG_ATH79_MACH_EAP300V2)	+= mach-eap300v2.o
-+obj-$(CONFIG_ATH79_MACH_EAP7660D)	+= mach-eap7660d.o
-+obj-$(CONFIG_ATH79_MACH_EL_M150)	+= mach-el-m150.o
-+obj-$(CONFIG_ATH79_MACH_EL_MINI)	+= mach-el-mini.o
-+obj-$(CONFIG_ATH79_MACH_EPG5000)	+= mach-epg5000.o
-+obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
-+obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
-+obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
-+obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
-+obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)	+= mach-hiwifi-hc6361.o
-+obj-$(CONFIG_ATH79_MACH_JA76PF)		+= mach-ja76pf.o
-+obj-$(CONFIG_ATH79_MACH_JWAP003)	+= mach-jwap003.o
-+obj-$(CONFIG_ATH79_MACH_HORNET_UB)	+= mach-hornet-ub.o
-+obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)     += mach-mc-mac1200r.o
-+obj-$(CONFIG_ATH79_MACH_MR12)		+= mach-mr12.o
-+obj-$(CONFIG_ATH79_MACH_MR16)		+= mach-mr16.o
-+obj-$(CONFIG_ATH79_MACH_MR600)		+= mach-mr600.o
-+obj-$(CONFIG_ATH79_MACH_MR900)		+= mach-mr900.o
-+obj-$(CONFIG_ATH79_MACH_MYNET_N600)	+= mach-mynet-n600.o
-+obj-$(CONFIG_ATH79_MACH_MYNET_N750)	+= mach-mynet-n750.o
-+obj-$(CONFIG_ATH79_MACH_MYNET_REXT)	+= mach-mynet-rext.o
-+obj-$(CONFIG_ATH79_MACH_MZK_W04NU)	+= mach-mzk-w04nu.o
-+obj-$(CONFIG_ATH79_MACH_MZK_W300NH)	+= mach-mzk-w300nh.o
-+obj-$(CONFIG_ATH79_MACH_NBG460N)	+= mach-nbg460n.o
-+obj-$(CONFIG_ATH79_MACH_OM2P)		+= mach-om2p.o
-+obj-$(CONFIG_ATH79_MACH_OM5P)		+= mach-om5p.o
-+obj-$(CONFIG_ATH79_MACH_ONION_OMEGA)  += mach-onion-omega.o
-+obj-$(CONFIG_ATH79_MACH_PB42)		+= mach-pb42.o
- obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
-+obj-$(CONFIG_ATH79_MACH_PB92)		+= mach-pb92.o
-+obj-$(CONFIG_ATH79_MACH_QIHOO_C301)	+= mach-qihoo-c301.o
-+obj-$(CONFIG_ATH79_MACH_R6100)		+= mach-r6100.o
-+obj-$(CONFIG_ATH79_MACH_RB4XX)		+= mach-rb4xx.o
-+obj-$(CONFIG_ATH79_MACH_RB750)		+= mach-rb750.o
-+obj-$(CONFIG_ATH79_MACH_RB91X)		+= mach-rb91x.o
-+obj-$(CONFIG_ATH79_MACH_RB922)		+= mach-rb922.o
-+obj-$(CONFIG_ATH79_MACH_RB95X)		+= mach-rb95x.o
-+obj-$(CONFIG_ATH79_MACH_RB2011)		+= mach-rb2011.o
-+obj-$(CONFIG_ATH79_MACH_RBSXTLITE)	+= mach-rbsxtlite.o
-+obj-$(CONFIG_ATH79_MACH_RW2458N)	+= mach-rw2458n.o
-+obj-$(CONFIG_ATH79_MACH_SMART_300)	+= mach-smart-300.o
-+obj-$(CONFIG_ATH79_MACH_TEW_632BRP)	+= mach-tew-632brp.o
-+obj-$(CONFIG_ATH79_MACH_TEW_673GRU)	+= mach-tew-673gru.o
-+obj-$(CONFIG_ATH79_MACH_TEW_712BR)	+= mach-tew-712br.o
-+obj-$(CONFIG_ATH79_MACH_TEW_732BR)	+= mach-tew-732br.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR11U)	+= mach-tl-mr11u.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR13U)	+= mach-tl-mr13u.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR3020)	+= mach-tl-mr3020.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR3X20)	+= mach-tl-mr3x20.o
-+obj-$(CONFIG_ATH79_MACH_TL_WAX50RE)     += mach-tl-wax50re.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2)	+= mach-tl-wa701nd-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2)	+= mach-tl-wa7210n-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2)	+= mach-tl-wa830re-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
-+obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)	+= mach-tl-wr741nd-v4.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8)	+= mach-tl-wr841n-v8.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9)	+= mach-tl-wr841n-v9.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6)	+= mach-tl-wr941nd-v6.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2)	+= mach-tl-wr1041n-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)	+= mach-tl-wr1043nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2)	+= mach-tl-wr1043nd-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR2543N)	+= mach-tl-wr2543n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR703N)	+= mach-tl-wr703n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3)	+= mach-tl-wr720n-v3.o
-+obj-$(CONFIG_ATH79_MACH_TUBE2H)		+= mach-tube2h.o
-+obj-$(CONFIG_ATH79_MACH_UBNT)		+= mach-ubnt.o
- obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o
-+obj-$(CONFIG_ATH79_MACH_WEIO)		+= mach-weio.o
-+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N)	+= mach-whr-hp-g300n.o
-+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N)	+= mach-wlae-ag300n.o
-+obj-$(CONFIG_ATH79_MACH_WLR8100)	+= mach-wlr8100.o
-+obj-$(CONFIG_ATH79_MACH_WNDAP360)	+= mach-wndap360.o
-+obj-$(CONFIG_ATH79_MACH_WNDR3700)	+= mach-wndr3700.o
-+obj-$(CONFIG_ATH79_MACH_WNDR4300)	+= mach-wndr4300.o
-+obj-$(CONFIG_ATH79_MACH_WNR2000)	+= mach-wnr2000.o
-+obj-$(CONFIG_ATH79_MACH_WNR2000_V3)	+= mach-wnr2000-v3.o
-+obj-$(CONFIG_ATH79_MACH_WNR2000_V4)	+= mach-wnr2000-v4.o
-+obj-$(CONFIG_ATH79_MACH_WNR2200)	+= mach-wnr2200.o
-+obj-$(CONFIG_ATH79_MACH_WP543)		+= mach-wp543.o
-+obj-$(CONFIG_ATH79_MACH_WPE72)		+= mach-wpe72.o
-+obj-$(CONFIG_ATH79_MACH_WPJ344)	+= mach-wpj344.o
-+obj-$(CONFIG_ATH79_MACH_WPJ531)	+= mach-wpj531.o
-+obj-$(CONFIG_ATH79_MACH_WPJ558)	+= mach-wpj558.o
-+obj-$(CONFIG_ATH79_MACH_WRT160NL)	+= mach-wrt160nl.o
-+obj-$(CONFIG_ATH79_MACH_WRT400N)	+= mach-wrt400n.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)	+= mach-wzr-hp-g300nh.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)	+= mach-wzr-hp-g300nh2.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)	+= mach-wzr-hp-ag300h.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H)	+= mach-wzr-hp-g450h.o
-+obj-$(CONFIG_ATH79_MACH_WZR_450HP2)	+= mach-wzr-450hp2.o
-+obj-$(CONFIG_ATH79_MACH_ZCN_1523H)	+= mach-zcn-1523h.o
-+obj-$(CONFIG_ATH79_MACH_CARAMBOLA2)	+= mach-carambola2.o
-+obj-$(CONFIG_ATH79_MACH_NBG6716)	+= mach-nbg6716.o
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -136,6 +136,13 @@ void __init prom_init(void)
- 		initrd_end = initrd_start + fw_getenvl("initrd_size");
- 	}
- #endif
-+
-+	if (strstr(arcs_cmdline, "board=750Gr3") ||
-+	    strstr(arcs_cmdline, "board=951G") ||
-+	    strstr(arcs_cmdline, "board=2011L") ||
-+	    strstr(arcs_cmdline, "board=711Gr100") ||
-+	    strstr(arcs_cmdline, "board=922gs"))
-+		ath79_prom_append_cmdline("console", "ttyS0,115200");
- }
- 
- void __init prom_free_prom_memory(void)

target/linux/ar71xx/patches-4.1/701-MIPS-ath79-add-routerboard-detection.patch

@@ -0,0 +1,16 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -136,6 +136,13 @@ void __init prom_init(void)
+ 		initrd_end = initrd_start + fw_getenvl("initrd_size");
+ 	}
+ #endif
++
++	if (strstr(arcs_cmdline, "board=750Gr3") ||
++	    strstr(arcs_cmdline, "board=951G") ||
++	    strstr(arcs_cmdline, "board=2011L") ||
++	    strstr(arcs_cmdline, "board=711Gr100") ||
++	    strstr(arcs_cmdline, "board=922gs"))
++		ath79_prom_append_cmdline("console", "ttyS0,115200");
+ }
+ 
+ void __init prom_free_prom_memory(void)

target/linux/ar71xx/patches-4.1/702-MIPS-ath79-openwrt-dr344.patch

@@ -1,42 +0,0 @@
-diff -Nru a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
---- a/arch/mips/ath79/Kconfig	2015-10-27 22:09:32.705886861 +0100
-+++ b/arch/mips/ath79/Kconfig	2015-10-27 22:16:08.822566162 +0100
-@@ -512,6 +512,16 @@
- 	select ATH79_DEV_NFC
- 	select ATH79_DEV_USB
- 
-+config ATH79_MACH_DR344
-+	bool "Wallys DR344 board support"
-+	select SOC_AS934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_DRAGINO2
- 	bool "DRAGINO V2 support"
- 	select SOC_AR933X
-diff -Nru a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
---- a/arch/mips/ath79/machtypes.h	2015-10-27 22:09:32.706886873 +0100
-+++ b/arch/mips/ath79/machtypes.h	2015-10-27 22:12:28.011957673 +0100
-@@ -60,6 +60,7 @@
- 	ATH79_MACH_DIR_835_A1,		/* D-Link DIR-835 rev. A1 */
- 	ATH79_MACH_DLAN_PRO_500_WP,	/* devolo dLAN pro 500 Wireless+ */
- 	ATH79_MACH_DLAN_PRO_1200_AC,	/* devolo dLAN pro 1200+ WiFi ac*/
-+	ATH79_MACH_DR344,		/* Wallys DR344 */
- 	ATH79_MACH_DRAGINO2,		/* Dragino Version 2 */
- 	ATH79_MACH_ESR900,		/* EnGenius ESR900 */
- 	ATH79_MACH_EW_DORIN,		/* embedded wireless Dorin Platform */
-diff -Nru a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
---- a/arch/mips/ath79/Makefile	2015-10-27 22:09:32.706886873 +0100
-+++ b/arch/mips/ath79/Makefile	2015-10-27 22:17:18.716391867 +0100
-@@ -72,6 +72,7 @@
- obj-$(CONFIG_ATH79_MACH_DIR_615_I1)	+= mach-dir-615-i1.o
- obj-$(CONFIG_ATH79_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
- obj-$(CONFIG_ATH79_MACH_DIR_825_C1)	+= mach-dir-825-c1.o
-+obj-$(CONFIG_ATH79_MACH_DR344)	+= mach-dr344.o
- obj-$(CONFIG_ATH79_MACH_DRAGINO2)	+= mach-dragino2.o
- obj-$(CONFIG_ATH79_MACH_ESR900)	+= mach-esr900.o
- obj-$(CONFIG_ATH79_MACH_EW_DORIN)	+= mach-ew-dorin.o

target/linux/ar71xx/patches-4.1/799-MIPS-ath79-add-minibox-v1-support.patch

@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -70,6 +70,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_EPG5000,		/* EnGenius EPG5000 */
- 	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
- 	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
-+	ATH79_MACH_GS_MINIBOX_V1,	/* Gainstrong MiniBox V1.0 */
- 	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
- 	ATH79_MACH_HIWIFI_HC6361,	/* HiWiFi HC6361 */
- 	ATH79_MACH_JA76PF,		/* jjPlus JA76PF */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -565,6 +565,16 @@ config ATH79_MACH_EAP300V2
- 	select ATH79_DEV_M25P80
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_GS_MINIBOX_V1
-+	bool "Gainstrong MiniBox V1.0 support"
-+	select SOC_AR933X
-+	select ARH79_DEV_ETH
-+	select ARH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GS_OOLITE
-        bool "GS Oolite V1 support"
-        select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -81,6 +81,7 @@ obj-$(CONFIG_ATH79_MACH_EPG5000)	+= mach
- obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
- obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
- obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
-+obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)	+= mach-gs-minibox-v1.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
- obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)	+= mach-hiwifi-hc6361.o
- obj-$(CONFIG_ATH79_MACH_JA76PF)		+= mach-ja76pf.o

target/linux/ar71xx/patches-4.1/813-MIPS-ath79-add-ap147-support.patch

@@ -1,42 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -138,6 +138,19 @@ config ATH79_MACH_AP143
- 	  Say 'Y' here if you want your kernel to support the
- 	  Atheros AP143 reference board.
- 
-+config ATH79_MACH_AP147
-+	bool "Atheros AP147 reference board"
-+	select SOC_QCA953X
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  QCA AP147 reference boards.
-+
- config ATH79_MACH_AP81
- 	bool "Atheros AP81 reference board"
- 	select SOC_AR913X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-
- obj-$(CONFIG_ATH79_MACH_AP132)		+= mach-ap132.o
- obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
- obj-$(CONFIG_ATH79_MACH_AP143)		+= mach-ap143.o
-+obj-$(CONFIG_ATH79_MACH_AP147)		+= mach-ap147.o
- obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
- obj-$(CONFIG_ATH79_MACH_AP83)		+= mach-ap83.o
- obj-$(CONFIG_ATH79_MACH_AP96)		+= mach-ap96.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -31,6 +31,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
- 	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
- 	ATH79_MACH_AP143,		/* Atheros AP143 reference board */
-+	ATH79_MACH_AP147_010,		/* Atheros AP147-010 reference board */
- 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
- 	ATH79_MACH_AP83,		/* Atheros AP83 */
- 	ATH79_MACH_AP96,		/* Atheros AP96 */

target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch

@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -923,6 +923,16 @@ config ATH79_MACH_EAP7660D
- 	select ATH79_DEV_LEDS_GPIO
- 	select ATH79_DEV_M25P80
- 
-+config ATH79_MACH_BSB
-+	bool "Smart Electronics Black Swift board"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_ARCHER_C7
- 	bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
- 	select SOC_QCA955X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP96)		+= mach-a
- obj-$(CONFIG_ATH79_MACH_ARCHER_C7)	+= mach-archer-c7.o
- obj-$(CONFIG_ATH79_MACH_AW_NR580)	+= mach-aw-nr580.o
- obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
-+obj-$(CONFIG_ATH79_MACH_BSB)		+= mach-bsb.o
- obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
- obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)	+= mach-cf-e316n-v2.o
- obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -39,6 +39,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_ARCHER_C7,		/* TP-LINK Archer C7 board */
- 	ATH79_MACH_AW_NR580,		/* AzureWave AW-NR580 */
- 	ATH79_MACH_BHU_BXU2000N2_A1,	/* BHU BXU2000n-2 A1 */
-+	ATH79_MACH_BSB,			/* Smart Electronics Black Swift board */
- 	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
- 	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
- 	ATH79_MACH_CF_E316N_V2,		/* COMFAST CF-E316N v2 */

target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch

@@ -1,40 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1072,6 +1072,17 @@ config ATH79_MACH_TL_WDR4300
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_TL_WDR6500_V2
-+	bool "TP-LINK TL-WDR6500 v2 board support"
-+	select SOC_QCA956X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_TL_WR703N
- 	bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
- 	select SOC_AR933X
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -158,6 +158,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
- 	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
- 	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
-+	ATH79_MACH_TL_WDR6500_V2,	/* TP-LINK TL-WDR6500 v2 */
- 	ATH79_MACH_TL_WDR4900_V2,	/* TP-LINK TL-WDR4900 v2 */
- 	ATH79_MACH_TL_WR1041N_V2,	/* TP-LINK TL-WR1041N v2 */
- 	ATH79_MACH_TL_WR1043ND,		/* TP-LINK TL-WR1043ND */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -133,6 +133,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= m
- obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
- obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
- obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
-+obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2)  += mach-tl-wdr6500-v2.o
- obj-$(CONFIG_ATH79_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
- obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)	+= mach-tl-wr741nd-v4.o
- obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o

target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-ap152-support.patch

@@ -1,43 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -151,6 +151,20 @@ config ATH79_MACH_AP147
- 	  Say 'Y' here if you want your kernel to support the
- 	  QCA AP147 reference boards.
- 
-+config ATH79_MACH_AP152
-+	bool "Atheros AP152 reference board"
-+	select SOC_QCA956X
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  QCA AP152 reference boards.
-+
-+
- config ATH79_MACH_AP81
- 	bool "Atheros AP81 reference board"
- 	select SOC_AR913X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_ATH79_MACH_AP132)		+= mach-
- obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
- obj-$(CONFIG_ATH79_MACH_AP143)		+= mach-ap143.o
- obj-$(CONFIG_ATH79_MACH_AP147)		+= mach-ap147.o
-+obj-$(CONFIG_ATH79_MACH_AP152)		+= mach-ap152.o
- obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
- obj-$(CONFIG_ATH79_MACH_AP83)		+= mach-ap83.o
- obj-$(CONFIG_ATH79_MACH_AP96)		+= mach-ap96.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -32,6 +32,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
- 	ATH79_MACH_AP143,		/* Atheros AP143 reference board */
- 	ATH79_MACH_AP147_010,		/* Atheros AP147-010 reference board */
-+	ATH79_MACH_AP152,		/* Atheros AP152 reference board */
- 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
- 	ATH79_MACH_AP83,		/* Atheros AP83 */
- 	ATH79_MACH_AP96,		/* Atheros AP96 */

target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-mr1750-support.patch

@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -919,6 +919,16 @@ config ATH79_MACH_CAP4200AG
- 	select ATH79_DEV_M25P80
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_MR1750
-+	bool "OpenMesh MR1750 board support"
-+	select SOC_QCA955X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_MR900
- 	bool "OpenMesh MR900 board support"
- 	select SOC_QCA955X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -93,6 +93,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB)	+= ma
- obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)     += mach-mc-mac1200r.o
- obj-$(CONFIG_ATH79_MACH_MR12)		+= mach-mr12.o
- obj-$(CONFIG_ATH79_MACH_MR16)		+= mach-mr16.o
-+obj-$(CONFIG_ATH79_MACH_MR1750)		+= mach-mr1750.o
- obj-$(CONFIG_ATH79_MACH_MR600)		+= mach-mr600.o
- obj-$(CONFIG_ATH79_MACH_MR900)		+= mach-mr900.o
- obj-$(CONFIG_ATH79_MACH_MYNET_N600)	+= mach-mynet-n600.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -82,6 +82,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_HORNET_UB,		/* ALFA Networks Hornet-UB */
- 	ATH79_MACH_MR12,		/* Cisco Meraki MR12 */
- 	ATH79_MACH_MR16,		/* Cisco Meraki MR16 */
-+	ATH79_MACH_MR1750,		/* OpenMesh MR1750 */
- 	ATH79_MACH_MR600V2,		/* OpenMesh MR600v2 */
- 	ATH79_MACH_MR600,		/* OpenMesh MR600 */
- 	ATH79_MACH_MR900,		/* OpenMesh MR900 */

target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-tl-wdr3320-v2-support.patch

@@ -1,40 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1074,6 +1074,17 @@ config ATH79_MACH_TL_WA901ND_V2
- 	select ATH79_DEV_M25P80
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_TL_WDR3320_V2
-+	bool "TP-LINK TL-WDR3320 v2 board support"
-+	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_TL_WDR3500
- 	bool "TP-LINK TL-WDR3500 board support"
- 	select SOC_AR934X
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -158,6 +158,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_TL_WA901ND,		/* TP-LINK TL-WA901ND */
- 	ATH79_MACH_TL_WA901ND_V2,	/* TP-LINK TL-WA901ND v2 */
- 	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
-+	ATH79_MACH_TL_WDR3320_V2,	/* TP-LINK TL-WDR3320 v2 */
- 	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
- 	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
- 	ATH79_MACH_TL_WDR6500_V2,	/* TP-LINK TL-WDR6500 v2 */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -133,6 +133,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2)	+
- obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2)	+= mach-tl-wa830re-v2.o
- obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o
- obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2)  += mach-tl-wdr3320-v2.o
- obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
- obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
- obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2)  += mach-tl-wdr6500-v2.o

target/linux/ar71xx/patches-4.1/818-MIPS-ath79-add-nu801-led-driver.patch

@@ -1,9 +1,9 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
 @@ -500,6 +500,13 @@ config LEDS_MENF21BMC
-
+ 
  comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
-
+ 
 +config LEDS_NU801
 +	tristate "LED driver for NU801 RGB LED"
 +	depends on LEDS_CLASS && ATH79_MACH_MR18

target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch

@@ -1,42 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -76,6 +76,19 @@ config ATH79_MACH_ANTMINER_S3
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_ARDUINO_YUN
-+	bool "Arduino Yun"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Arduino Yun.
-+
- config ATH79_MACH_AP113
- 	bool "Atheros AP113 board support"
- 	select SOC_AR724X
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -23,6 +23,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_ALL0315N,		/* Allnet ALL0315N */
- 	ATH79_MACH_ANTMINER_S1,	/* Antminer S1 */
- 	ATH79_MACH_ANTMINER_S3,	/* Antminer S3 */
-+	ATH79_MACH_ARDUINO_YUN,		/* Yun */
- 	ATH79_MACH_AP113,		/* Atheros AP113 reference board */
- 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
- 	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N)	+= mac
- obj-$(CONFIG_ATH79_MACH_ALL0315N)	+= mach-all0315n.o
- obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
- obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
-+obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN)	+= mach-arduino-yun.o
- obj-$(CONFIG_ATH79_MACH_AP113)		+= mach-ap113.o
- obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
- obj-$(CONFIG_ATH79_MACH_AP132)		+= mach-ap132.o

target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch

@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -586,6 +586,16 @@ config ATH79_MACH_EL_MINI
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_GL_AR150
-+	bool "GL AR150 support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GL_INET
- 	bool "GL-INET support"
- 	select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -84,6 +84,7 @@ obj-$(CONFIG_ATH79_MACH_EL_MINI)	+= mach
- obj-$(CONFIG_ATH79_MACH_EPG5000)	+= mach-epg5000.o
- obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
- obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
-+obj-$(CONFIG_ATH79_MACH_GL_AR150)   += mach-gl-ar150.o
- obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
- obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)	+= mach-gs-minibox-v1.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -73,6 +73,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_ESR1750,		/* EnGenius ESR1750 */
- 	ATH79_MACH_EPG5000,		/* EnGenius EPG5000 */
- 	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
-+	ATH79_MACH_GL_AR150,    /* GL-AR150 support */
- 	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
- 	ATH79_MACH_GS_MINIBOX_V1,	/* Gainstrong MiniBox V1.0 */
- 	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */

target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch

@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -596,6 +596,16 @@ config ATH79_MACH_GL_AR150
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_GL_AR300
-+	bool "GL_AR300 support"
-+	select SOC_AR934X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GL_INET
- 	bool "GL-INET support"
- 	select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_EPG5000)	+= mach
- obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
- obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
- obj-$(CONFIG_ATH79_MACH_GL_AR150)   += mach-gl-ar150.o
-+obj-$(CONFIG_ATH79_MACH_GL_AR300)	+= mach-gl-ar300.o
- obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
- obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)	+= mach-gs-minibox-v1.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -74,6 +74,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_EPG5000,		/* EnGenius EPG5000 */
- 	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
- 	ATH79_MACH_GL_AR150,    /* GL-AR150 support */
-+	ATH79_MACH_GL_AR300,		/* GL-AR300 */
- 	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
- 	ATH79_MACH_GS_MINIBOX_V1,	/* Gainstrong MiniBox V1.0 */
- 	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */

target/linux/ar71xx/patches-4.1/913-MIPS-ath79-add-domino-support.patch

@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -606,6 +606,16 @@ config ATH79_MACH_GL_AR300
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_GL_DOMINO
-+	bool "DOMINO support"
-+	select SOC_AR933X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GL_INET
- 	bool "GL-INET support"
- 	select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -86,6 +86,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach
- obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
- obj-$(CONFIG_ATH79_MACH_GL_AR150)   += mach-gl-ar150.o
- obj-$(CONFIG_ATH79_MACH_GL_AR300)	+= mach-gl-ar300.o
-+obj-$(CONFIG_ATH79_MACH_GL_DOMINO)		+= mach-gl-domino.o
- obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
- obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)	+= mach-gs-minibox-v1.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -75,6 +75,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
- 	ATH79_MACH_GL_AR150,    /* GL-AR150 support */
- 	ATH79_MACH_GL_AR300,		/* GL-AR300 */
-+	ATH79_MACH_GL_DOMINO,		/* Domino */
- 	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
- 	ATH79_MACH_GS_MINIBOX_V1,	/* Gainstrong MiniBox V1.0 */
- 	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */