atheros: spaces fixes

Add missed spaces and remove odd space as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <[email protected]>

SVN-Revision: 41091

target/linux/atheros/patches-3.10/100-board.patch

@@ -213,7 +213,7 @@
 +		radio_config = 0;
 +	}
 +
-+	return (u8 *) radio_config;
++	return radio_config;
 +}
 +
 +int __init
@@ -248,7 +248,7 @@
 +	}
 +
 +	board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-+	ar231x_board.config = (struct ar231x_boarddata *) board_data;
++	ar231x_board.config = (struct ar231x_boarddata *)board_data;
 +	memcpy(board_data, bcfg, 0x100);
 +	if (broken_boarddata) {
 +		pr_warn("WARNING: broken board data detected\n");
@@ -269,7 +269,7 @@
 +	 * of what the physical layout on the flash chip looks like */
 +
 +	if (ar231x_board.radio)
-+		rcfg = (u8 *) ar231x_board.radio;
++		rcfg = (u8 *)ar231x_board.radio;
 +	else
 +		rcfg = find_radio_config(flash_limit, bcfg);
 +
@@ -1818,13 +1818,13 @@
 +
 +static const struct gpio_led_platform_data ar5312_led_data = {
 +	.num_leds = ARRAY_SIZE(ar5312_leds),
-+	.leds = (void *) ar5312_leds,
++	.leds = (void *)ar5312_leds,
 +};
 +
 +static struct platform_device ar5312_gpio_leds = {
 +	.name = "leds-gpio",
 +	.id = -1,
-+	.dev.platform_data = (void *) &ar5312_led_data,
++	.dev.platform_data = (void *)&ar5312_led_data,
 +};
 +#endif
 +
@@ -1857,7 +1857,7 @@
 +	ar231x_write_reg(AR531X_FLASHCTL2,
 +		ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
 +
-+	return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
++	return (char *)KSEG1ADDR(AR531X_FLASH + 0x800000);
 +}
 +
 +int __init ar5312_init_devices(void)
@@ -1916,7 +1916,7 @@
 +			c--;
 +	}
 +
-+	switch(ar231x_devtype) {
++	switch (ar231x_devtype) {
 +	case DEV_TYPE_AR5312:
 +		ar5312_eth0_data.macaddr = config->enet0_mac;
 +		ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
@@ -2258,7 +2258,7 @@
 +	unsigned int imr;
 +
 +	imr = ar231x_read_reg(AR2315_IMR);
-+	switch(d->irq) {
++	switch (d->irq) {
 +	case AR531X_MISC_IRQ_SPI:
 +		imr |= AR2315_ISR_SPI;
 +		break;
@@ -2289,7 +2289,7 @@
 +	unsigned int imr;
 +
 +	imr = ar231x_read_reg(AR2315_IMR);
-+	switch(d->irq) {
++	switch (d->irq) {
 +	case AR531X_MISC_IRQ_SPI:
 +		imr &= ~AR2315_ISR_SPI;
 +		break;
@@ -2581,20 +2581,20 @@
 +
 +	ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
 +		flash_size - 1;
-+	return (u8 *) ar2315_spiflash_res[0].end + 1;
++	return (u8 *)ar2315_spiflash_res[0].end + 1;
 +}
 +
 +#ifdef CONFIG_LEDS_GPIO
 +static struct gpio_led ar2315_leds[6];
 +static struct gpio_led_platform_data ar2315_led_data = {
-+	.leds = (void *) ar2315_leds,
++	.leds = (void *)ar2315_leds,
 +};
 +
 +static struct platform_device ar2315_gpio_leds = {
 +	.name = "leds-gpio",
 +	.id = -1,
 +	.dev = {
-+		.platform_data = (void *) &ar2315_led_data,
++		.platform_data = (void *)&ar2315_led_data,
 +	}
 +};
 +
@@ -2606,8 +2606,8 @@
 +
 +	ar2315_led_data.num_leds = 0;
 +	for (i = 1; i < 8; i++) {
-+		if((i == AR2315_RESET_GPIO) ||
-+		   (i == ar231x_board.config->reset_config_gpio))
++		if ((i == AR2315_RESET_GPIO) ||
++		    (i == ar231x_board.config->reset_config_gpio))
 +			continue;
 +
 +		if (i == ar231x_board.config->sys_led_gpio)
@@ -2652,12 +2652,12 @@
 +static void
 +ar2315_restart(char *command)
 +{
-+	void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
++	void (*mips_reset_vec)(void) = (void *)0xbfc00000;
 +
 +	local_irq_disable();
 +
 +	/* try reset the system via reset control */
-+	ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
++	ar231x_write_reg(AR2315_COLD_RESET, AR2317_RESET_SYSTEM);
 +
 +	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
 +	 * give it some time to attempt a gpio based hardware reset
@@ -2797,7 +2797,7 @@
 +	/* Clear any lingering AHB errors */
 +	config = read_c0_config();
 +	write_c0_config(config & ~0x3);
-+	ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
++	ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
 +	ar231x_read_reg(AR2315_AHB_ERR1);
 +	ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
 +
@@ -2922,13 +2922,13 @@
 +static inline u32
 +ar231x_read_reg(u32 reg)
 +{
-+	return __raw_readl((u32 *) KSEG1ADDR(reg));
++	return __raw_readl((u32 *)KSEG1ADDR(reg));
 +}
 +
 +static inline void
 +ar231x_write_reg(u32 reg, u32 val)
 +{
-+	__raw_writel(val, (u32 *) KSEG1ADDR(reg));
++	__raw_writel(val, (u32 *)KSEG1ADDR(reg));
 +}
 +
 +static inline u32

target/linux/atheros/patches-3.10/105-ar2315_pci.patch

@@ -7,7 +7,7 @@
 +obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
 --- /dev/null
 +++ b/arch/mips/ar231x/pci.c
-@@ -0,0 +1,228 @@
+@@ -0,0 +1,229 @@
 +/*
 + * This program is free software; you can redistribute it and/or
 + * modify it under the terms of the GNU General Public License
@@ -71,18 +71,18 @@
 +	if (write) {
 +		value = *ptr;
 +		if (size == 1)
-+			err = put_dbe(value, (u8 *) addr);
++			err = put_dbe(value, (u8 *)addr);
 +		else if (size == 2)
-+			err = put_dbe(value, (u16 *) addr);
++			err = put_dbe(value, (u16 *)addr);
 +		else if (size == 4)
-+			err = put_dbe(value, (u32 *) addr);
++			err = put_dbe(value, (u32 *)addr);
 +	} else {
 +		if (size == 1)
-+			err = get_dbe(value, (u8 *) addr);
++			err = get_dbe(value, (u8 *)addr);
 +		else if (size == 2)
-+			err = get_dbe(value, (u16 *) addr);
++			err = get_dbe(value, (u16 *)addr);
 +		else if (size == 4)
-+			err = get_dbe(value, (u32 *) addr);
++			err = get_dbe(value, (u32 *)addr);
 +		if (err)
 +			*ptr = 0xffffffff;
 +		else
@@ -96,7 +96,8 @@
 +	return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
 +}
 +
-+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
++static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
++			   int size, u32 *value)
 +{
 +	return config_access(devfn, where, size, value, 0);
 +}

target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch

@@ -49,8 +49,8 @@
 + * (at your option) any later version.
 + *
 + * Additional credits:
-+ * 	This code is taken from John Taylor's Sibyte driver and then
-+ * 	modified for the AR2313.
++ * This code is taken from John Taylor's Sibyte driver and then
++ * modified for the AR2313.
 + */
 +
 +#include <linux/module.h>
@@ -88,7 +88,7 @@
 +
 +
 +#ifndef min
-+#define min(a,b)	(((a)<(b))?(a):(b))
++#define min(a, b)	(((a) < (b)) ? (a) : (b))
 +#endif
 +
 +#ifndef SMP_CACHE_BYTES
@@ -179,7 +179,7 @@
 +static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
 +static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
 +static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe (struct net_device *dev);
++static int ar231x_mdiobus_probe(struct net_device *dev);
 +static void ar231x_adjust_link(struct net_device *dev);
 +
 +#ifndef ERR
@@ -423,7 +423,7 @@
 +{
 +	struct ar231x_private *sp = netdev_priv(dev);
 +	if (sp->rx_ring != NULL) {
-+		kfree((void *) KSEG0ADDR(sp->rx_ring));
++		kfree((void *)KSEG0ADDR(sp->rx_ring));
 +		sp->rx_ring = NULL;
 +		sp->tx_ring = NULL;
 +	}
@@ -452,9 +452,9 @@
 +	dma_cache_inv((unsigned int) space, size);
 +
 +	/* now convert pointer to KSEG1 */
-+	space = (ar231x_descr_t *) KSEG1ADDR(space);
++	space = (ar231x_descr_t *)KSEG1ADDR(space);
 +
-+	memset((void *) space, 0, size);
++	memset((void *)space, 0, size);
 +
 +	sp->rx_ring = space;
 +	space += AR2313_DESCR_ENTRIES;
@@ -490,9 +490,9 @@
 +	ar231x_free_descriptors(dev);
 +
 +	if (sp->eth_regs)
-+		iounmap((void *) sp->eth_regs);
++		iounmap((void *)sp->eth_regs);
 +	if (sp->dma_regs)
-+		iounmap((void *) sp->dma_regs);
++		iounmap((void *)sp->dma_regs);
 +
 +	if (sp->rx_skb) {
 +		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
@@ -535,7 +535,7 @@
 +
 +static void ar231x_link_timer_fn(unsigned long data)
 +{
-+	struct net_device *dev = (struct net_device *) data;
++	struct net_device *dev = (struct net_device *)data;
 +	struct ar231x_private *sp = netdev_priv(dev);
 +
 +	/**
@@ -781,7 +781,7 @@
 +		skb->dev = dev;
 +		sp->rx_skb[idx] = skb;
 +
-+		rd = (ar231x_descr_t *) & sp->rx_ring[idx];
++		rd = (ar231x_descr_t *)&sp->rx_ring[idx];
 +
 +		/* initialize dma descriptor */
 +		rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
@@ -942,7 +942,7 @@
 +
 +static void rx_tasklet_func(unsigned long data)
 +{
-+	struct net_device *dev = (struct net_device *) data;
++	struct net_device *dev = (struct net_device *)data;
 +	struct ar231x_private *sp = netdev_priv(dev);
 +
 +	if (sp->unloading)
@@ -969,7 +969,7 @@
 +
 +static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
 +{
-+	struct net_device *dev = (struct net_device *) dev_id;
++	struct net_device *dev = (struct net_device *)dev_id;
 +	struct ar231x_private *sp = netdev_priv(dev);
 +	unsigned int status, enabled;
 +
@@ -1149,7 +1149,7 @@
 +	switch (cmd) {
 +	case SIOCETHTOOL:
 +		spin_lock_irq(&sp->lock);
-+		ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
++		ret = phy_ethtool_ioctl(sp->phy_dev, (void *)ifr->ifr_data);
 +		spin_unlock_irq(&sp->lock);
 +		return ret;
 +
@@ -1235,7 +1235,7 @@
 +	return 0;
 +}
 +
-+static int ar231x_mdiobus_probe (struct net_device *dev)
++static int ar231x_mdiobus_probe(struct net_device *dev)
 +{
 +	struct ar231x_private *const sp = netdev_priv(dev);
 +	struct phy_device *phydev = NULL;
@@ -1250,7 +1250,7 @@
 +		}
 +
 +	if (!phydev) {
-+		printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
++		printk(KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
 +		return -1;
 +	}
 +

target/linux/atheros/patches-3.10/120-spiflash.patch

@@ -23,7 +23,7 @@
  
 --- /dev/null
 +++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,515 @@
+@@ -0,0 +1,517 @@
 +
 +/*
 + * MTD driver for the SPI Flash Memory support on Atheros AR2315
@@ -177,7 +177,7 @@
 +}
 +
 +static u32
-+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
++spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr)
 +{
 +	const struct opcodes *op;
 +	u32 reg, mask;
@@ -224,7 +224,7 @@
 + * and flashconfig_tbl array index for success.
 + */
 +static int
-+spiflash_probe_chip (struct spiflash_priv *priv)
++spiflash_probe_chip(struct spiflash_priv *priv)
 +{
 +	u32 sig;
 +	int flash_size;
@@ -273,7 +273,7 @@
 +		schedule();
 +		remove_wait_queue(&priv->wq, &wait);
 +
-+		if(signal_pending(current))
++		if (signal_pending(current))
 +			return 0;
 +
 +		goto retry;
@@ -301,7 +301,7 @@
 +
 +
 +static int
-+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
++spiflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 +{
 +	struct spiflash_priv *priv = to_spiflash(mtd);
 +	const struct opcodes *op;
@@ -333,7 +333,8 @@
 +}
 +
 +static int
-+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
++	      u_char *buf)
 +{
 +	struct spiflash_priv *priv = to_spiflash(mtd);
 +	u8 *read_addr;
@@ -357,7 +358,8 @@
 +}
 +
 +static int
-+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
++spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
++	       const u8 *buf)
 +{
 +	struct spiflash_priv *priv = to_spiflash(mtd);
 +	u32 opcode, bytes_left;
@@ -501,7 +503,7 @@
 +}
 +
 +static int
-+spiflash_remove (struct platform_device *pdev)
++spiflash_remove(struct platform_device *pdev)
 +{
 +	struct spiflash_priv *priv = platform_get_drvdata(pdev);
 +	struct mtd_info *mtd = &priv->mtd;
@@ -521,19 +523,19 @@
 +};
 +
 +int __init
-+spiflash_init (void)
++spiflash_init(void)
 +{
 +	return platform_driver_register(&spiflash_driver);
 +}
 +
 +void __exit
-+spiflash_exit (void)
++spiflash_exit(void)
 +{
 +	return platform_driver_unregister(&spiflash_driver);
 +}
 +
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
++module_init(spiflash_init);
++module_exit(spiflash_exit);
 +
 +MODULE_LICENSE("GPL");
 +MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");

target/linux/atheros/patches-3.10/130-watchdog.patch

@@ -56,7 +56,7 @@
 +static ssize_t
 +ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
 +{
-+	if(len)
++	if (len)
 +		ar2315_wdt_enable();
 +	return len;
 +}
@@ -64,7 +64,7 @@
 +static int
 +ar2315_wdt_open(struct inode *inode, struct file *file)
 +{
-+	if(in_use)
++	if (in_use)
 +		return -EBUSY;
 +	ar2315_wdt_enable();
 +	in_use = started = 1;
@@ -157,7 +157,7 @@
 +	}
 +
 +	ret = misc_register(&ar2315_wdt_miscdev);
-+	if(ret)
++	if (ret)
 +		dev_err(&dev->dev, "failed to register miscdev\n");
 +
 +out:
@@ -185,7 +185,7 @@
 +init_ar2315_wdt(void)
 +{
 +	int ret = platform_driver_register(&ar2315_wdt_driver);
-+	if(ret)
++	if (ret)
 +		pr_err("ar2315_wdt: error registering platfom driver!\n");
 +	return ret;
 +}

target/linux/atheros/patches-3.10/140-redboot_boardconfig.patch

@@ -38,7 +38,7 @@
  	}
  #endif
  	for ( ; i<nrparts; i++) {
-+		if(max_offset < buf[i].flash_base + buf[i].size)
++		if (max_offset < buf[i].flash_base + buf[i].size)
 +			max_offset = buf[i].flash_base + buf[i].size;
  		parts[i].size = fl->img->size;
  		parts[i].offset = fl->img->flash_base;

target/linux/atheros/patches-3.10/142-redboot_various_erase_size_fix.patch

@@ -47,7 +47,7 @@
  	}
  #endif
  	for ( ; i<nrparts; i++) {
--		if(max_offset < buf[i].flash_base + buf[i].size)
+-		if (max_offset < buf[i].flash_base + buf[i].size)
 -			max_offset = buf[i].flash_base + buf[i].size;
  		parts[i].size = fl->img->size;
  		parts[i].offset = fl->img->flash_base;

target/linux/atheros/patches-3.10/220-enet_micrel_workaround.patch

@@ -2,7 +2,7 @@
 +++ b/drivers/net/ethernet/ar231x/ar231x.c
 @@ -146,6 +146,7 @@ static int ar231x_mdiobus_write(struct m
  static int ar231x_mdiobus_reset(struct mii_bus *bus);
- static int ar231x_mdiobus_probe (struct net_device *dev);
+ static int ar231x_mdiobus_probe(struct net_device *dev);
  static void ar231x_adjust_link(struct net_device *dev);
 +static bool no_phy;
  

target/linux/atheros/patches-3.10/230-3_10-updates.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/ethernet/ar231x/ar231x.c
 +++ b/drivers/net/ethernet/ar231x/ar231x.c
-@@ -1272,7 +1272,7 @@ static int ar231x_mdiobus_probe (struct
+@@ -1272,7 +1272,7 @@ static int ar231x_mdiobus_probe(struct n
  	BUG_ON(!phydev);
  	BUG_ON(phydev->attached_dev);