ipq40xx: cellc_rtl30vw: fix imagebuilder generation

The image build process was modifying the generated IMAGE_KERNEL to
append rootfs information (crc). This caused:
 - sysupgrade & factory images to contain 2 times the root.squashfs
   information due to both modifying the same IMAGE_KERNEL.
 - the generated imagebuilder to contain an erroneous IMAGE_KERNEL that
   contained references to an unexisting root.squashfs (the one from
   previous cause). The RTL30VW wasn't therefore able to boot the
   generated images as they contained checksums from non existing rootfs.

This commit makes sure to use a temporary IMAGE_KERNEL to append the
rootfs information for both factory and sysupgrade images.

Fixes: #10511
Signed-off-by: Gregory Detal <[email protected]>

target/linux/ipq40xx/image/generic.mk

@@ -43,7 +43,8 @@ define Build/append-rootfshdr
 		-O linux -T filesystem \
 		-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
 		-n root.squashfs -d $(IMAGE_ROOTFS) [email protected]
-	dd [email protected] bs=64 count=1 >> $(IMAGE_KERNEL)
+	cat $(IMAGE_KERNEL) > $@.$1
+	dd [email protected] bs=64 count=1 >> $@.$1
 endef
 
 define Build/append-rutx-metadata
@@ -89,7 +90,7 @@ endef
 
 define Build/qsdk-ipq-factory-nand-askey
 	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh [email protected]\
-		askey_kernel $(IMAGE_KERNEL) \
+		askey_kernel $@.$1 \
 		askey_fs $(IMAGE_ROOTFS) \
 		ubifs $@
 	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f [email protected] [email protected]
@@ -313,8 +314,8 @@ define Device/cellc_rtl30vw
 	KERNEL_NAME := zImage
 	KERNEL_IN_UBI :=
 	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
-	IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
+	IMAGE/nand-factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
+	IMAGE/nand-sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar [email protected] | append-metadata
 	DEVICE_VENDOR := Cell C
 	DEVICE_MODEL := RTL30VW
 	SOC := qcom-ipq4019