brcm47xx: remove patch starting adding brcm4716 to ssb

brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576

target/linux/brcm47xx/patches-3.0/951-brcm4716-defines.patch

@@ -1,104 +0,0 @@
---- a/drivers/ssb/scan.c
-+++ b/drivers/ssb/scan.c
-@@ -90,6 +90,14 @@ const char *ssb_core_name(u16 coreid)
- 		return "ARM 1176";
- 	case SSB_DEV_ARM_7TDMI:
- 		return "ARM 7TDMI";
-+	case SSB_DEV_ETHERNET_GBIT2:
-+		return "Gigabit MAC";
-+	case SSB_DEV_MIPS_74K:
-+		return "MIPS 74k";
-+	case SSB_DEV_DDR_CTRLR:
-+		return "DDR1/2 memory controller";
-+	case SSB_DEV_I2S:
-+		return "I2S";
- 	}
- 	return "UNKNOWN";
- }
-@@ -148,6 +156,7 @@ static u8 chipid_to_nrcores(u16 chipid)
- 	case 0x4710:
- 	case 0x4610:
- 	case 0x4704:
-+	case 0x4716:
- 		return 9;
- 	default:
- 		ssb_printk(KERN_ERR PFX
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -166,9 +166,16 @@ struct ssb_bus_ops {
- #define SSB_DEV_MINI_MACPHY	0x823
- #define SSB_DEV_ARM_1176	0x824
- #define SSB_DEV_ARM_7TDMI	0x825
-+#define SSB_DEV_ETHERNET_GBIT2	0x82d
-+#define SSB_DEV_MIPS_74K	0x82c
-+#define SSB_DEV_DDR_CTRLR	0x82e
-+#define SSB_DEV_I2S			0x834
-+#define SSB_DEV_DEFAULT		0xfff
- 
- /* Vendor-ID values */
- #define SSB_VENDOR_BROADCOM	0x4243
-+#define SSB_VENDOR_BROADCOM2 0x04BF
-+#define SSB_VENDOR_ARM		0x43b
- 
- /* Some kernel subsystems poke with dev->drvdata, so we must use the
-  * following ugly workaround to get from struct device to struct ssb_device */
---- a/include/linux/ssb/ssb_regs.h
-+++ b/include/linux/ssb/ssb_regs.h
-@@ -11,6 +11,7 @@
- #define	SSB_SDRAM_SWAPPED	0x10000000U	/* Byteswapped Physical SDRAM */
- #define SSB_ENUM_BASE    	0x18000000U	/* Enumeration space base */
- #define	SSB_ENUM_LIMIT		0x18010000U	/* Enumeration space limit */
-+#define SSB_AI_BASE		0x18100000		/* base for AI registers */
- 
- #define	SSB_FLASH2		0x1c000000U	/* Flash Region 2 (region 1 shadowed here) */
- #define	SSB_FLASH2_SZ		0x02000000U	/* Size of Flash Region 2 */
-@@ -26,6 +27,7 @@
- #define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
- #define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
- 
-+#define SSB_EROM_ASD_SZ_BASE 0x00001000
- 
- /* Enumeration space constants */
- #define SSB_CORE_SIZE		0x1000	/* Size of a core MMIO area */
-@@ -556,5 +558,41 @@ enum {
- #define SSB_ADM_BASE2			0xFFFF0000	/* Type2 base address for the core */
- #define SSB_ADM_BASE2_SHIFT		16
- 
-+/***** EROM defines for AI type busses *****/
-+#define SSB_EROM_VALID			1
-+#define SSB_EROM_END			0xe
-+#define SSB_EROM_TAG			0xe
-+/* Adress Space Descriptor */
-+#define SSB_EROM_ASD			0x4
-+#define SSB_EROM_ASD_SP_MASK	0x00000f00
-+#define SSB_EROM_ASD_SP_SHIFT	8
-+#define SSB_EROM_ASD_ST_MASK	0x000000c0
-+#define SSB_EROM_ASD_ST_SLAVE	0x00000000
-+#define SSB_EROM_ASD_ST_BRIDGE	0x00000040
-+#define SSB_EROM_ASD_ST_MWRAP	0x000000c0
-+#define SSB_EROM_ASD_ST_SWRAP	0x00000080
-+#define SSB_EROM_ASD_ADDR_MASK	0xfffff000
-+#define SSB_EROM_ASD_AG32		0x00000008
-+#define SSB_EROM_ASD_SZ_MASK	0x00000030
-+#define SSB_EROM_ASD_SZ_SZD		0x00000030
-+#define SSB_EROM_ASD_SZ_SHIFT	4
-+#define SSB_EROM_CI				0
-+#define SSB_EROM_CIA_CID_MASK	0x000fff00
-+#define SSB_EROM_CIA_CID_SHIFT	8
-+#define SSB_EROM_CIA_MFG_MASK	0xfff00000
-+#define SSB_EROM_CIA_MFG_SHIFT	20
-+#define SSB_EROM_CIB_REV_MASK	0xff000000
-+#define SSB_EROM_CIB_REV_SHIFT	24
-+#define SSB_EROM_CIB_NMW_MASK	0x0007c000
-+#define SSB_EROM_CIB_NSW_MASK	0x00f80000
-+#define SSB_EROM_CIB_NSP_MASK	0x00003e00
-+
-+/***** Registers of AI config space *****/
-+#define SSB_AI_RESETCTRL		0x800 /* maybe 0x804 for big endian */
-+#define  SSB_AI_RESETCTRL_RESET	1
-+#define SSB_AI_IOCTRL			0x408 /* maybe 0x40c for big endian */
-+#define SSB_CF_FGC				0x0002
-+#define SSB_CF_CLOCK_EN			0x001
-+#define SSB_AI_oobselouta30		0x100
- 
- #endif /* LINUX_SSB_REGS_H_ */