kernel: update 3.10 to 3.10.26

Signed-off-by: Gabor Juhos <[email protected]>

SVN-Revision: 39220

include/kernel-version.mk

@@ -17,8 +17,8 @@ endif
 ifeq ($(LINUX_VERSION),3.9.11)
   LINUX_KERNEL_MD5SUM:=edbf88eb7f7d34dbd5d3887726790755
 endif
-ifeq ($(LINUX_VERSION),3.10.24)
-  LINUX_KERNEL_MD5SUM:=4b1270dda167a0ee8bead2681e0a9965
+ifeq ($(LINUX_VERSION),3.10.26)
+  LINUX_KERNEL_MD5SUM:=9cdbcb3463b9753fafd97cddb38d1211
 endif
 ifeq ($(LINUX_VERSION),3.12.5)
   LINUX_KERNEL_MD5SUM:=5b5330f657f562f7bef6da100a7133b1

target/linux/ar7/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs atm
 MAINTAINER:=Florian Fainelli <[email protected]>
 SUBTARGETS:=generic ac49x
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ar71xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=mips16
 CPU_TYPE=34kc
 SUBTARGETS:=generic nand mikrotik
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/avr32/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/bcm53xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs usb pci pcie gpio
 MAINTAINER:=Hauke Mehrtens <[email protected]>
 CPU_TYPE:=cortex-a9
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/brcm2708/Makefile

@@ -15,7 +15,7 @@ MAINTAINER:=Florian Fainelli <[email protected]>
 CPU_TYPE:=arm1176jzf-s
 CPU_SUBTYPE:=vfp
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += brcm2708-gpu-fw kmod-usb-hid kmod-sound-core kmod-sound-arm-bcm2835

target/linux/brcm47xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Broadcom BCM947xx/953xx
 FEATURES:=squashfs usb pcmcia
 MAINTAINER:=Hauke Mehrtens <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += swconfig kmod-diag wpad-mini nvram

target/linux/brcm63xx/Makefile

@@ -11,7 +11,7 @@ BOARD:=brcm63xx
 BOARDNAME:=Broadcom BCM63xx
 SUBTARGETS:=generic smp
 FEATURES:=squashfs usb atm pci pcmcia
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 MAINTAINER:=Florian Fainelli <[email protected]>
 
 include $(INCLUDE_DIR)/target.mk

target/linux/brcm63xx/patches-3.10/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch

@@ -11,7 +11,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
 
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -1091,7 +1091,8 @@ static int m25p_probe(struct spi_device
+@@ -1092,7 +1092,8 @@ static int m25p_probe(struct spi_device
  	/* partitions should match sector boundaries; and it may be good to
  	 * use readonly partitions for writeprotected sectors (BP2..BP0).
  	 */

target/linux/brcm63xx/patches-3.10/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch

@@ -60,7 +60,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  /*
   * Write an address range to the flash chip.  Data must be written in
   * FLASH_PAGESIZE chunks.  The address range may be any size provided
-@@ -986,6 +1008,9 @@ static int m25p_probe(struct spi_device
+@@ -987,6 +1009,9 @@ static int m25p_probe(struct spi_device
  		return -ENOMEM;
  	}
  

target/linux/brcm63xx/patches-3.10/414-MTD-m25p80-allow-passing-pp_data.patch

@@ -10,7 +10,7 @@ Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
 
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -975,6 +975,9 @@ static int m25p_probe(struct spi_device
+@@ -976,6 +976,9 @@ static int m25p_probe(struct spi_device
  			dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
  	}
  

target/linux/cns21xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Econa CNS21xx
 FEATURES:=squashfs
 CPU_TYPE:=fa526
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/generic/patches-3.10/130-mips_remove_plat_dma_functions.patch

@@ -157,7 +157,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	return 0;
 --- a/arch/mips/mm/dma-default.c
 +++ b/arch/mips/mm/dma-default.c
-@@ -289,7 +289,6 @@ static void mips_dma_sync_single_for_cpu
+@@ -293,7 +293,6 @@ static void mips_dma_sync_single_for_cpu
  static void mips_dma_sync_single_for_device(struct device *dev,
  	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
  {
@@ -165,7 +165,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!plat_device_is_coherent(dev))
  		__dma_sync(dma_addr_to_page(dev, dma_handle),
  			   dma_handle & ~PAGE_MASK, size, direction);
-@@ -323,7 +322,7 @@ static void mips_dma_sync_sg_for_device(
+@@ -327,7 +326,7 @@ static void mips_dma_sync_sg_for_device(
  
  int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
  {
@@ -174,7 +174,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  }
  
  int mips_dma_supported(struct device *dev, u64 mask)
-@@ -336,7 +335,6 @@ void dma_cache_sync(struct device *dev,
+@@ -340,7 +339,6 @@ void dma_cache_sync(struct device *dev,
  {
  	BUG_ON(direction == DMA_NONE);
  

target/linux/generic/patches-3.10/132-mips_inline_dma_ops.patch

@@ -459,7 +459,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
  
  static int __init setcoherentio(char *str)
-@@ -44,26 +44,6 @@ static int __init setnocoherentio(char *
+@@ -44,13 +44,6 @@ static int __init setnocoherentio(char *
  early_param("nocoherentio", setnocoherentio);
  #endif
  
@@ -470,23 +470,10 @@ Signed-off-by: Felix Fietkau <[email protected]>
 -		plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
 -}
 -
--/*
-- * Warning on the terminology - Linux calls an uncached area coherent;
-- * MIPS terminology calls memory areas with hardware maintained coherency
-- * coherent.
-- */
--
--static inline int cpu_is_noncoherent_r10000(struct device *dev)
--{
--	return !plat_device_is_coherent(dev) &&
--	       (current_cpu_type() == CPU_R10000 ||
--	       current_cpu_type() == CPU_R12000);
--}
--
- static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
- {
- 	gfp_t dma_flag;
-@@ -119,8 +99,9 @@ void *dma_alloc_noncoherent(struct devic
+ /*
+  * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
+  * speculatively fill random cachelines with stale data at any time,
+@@ -123,8 +116,9 @@ void *dma_alloc_noncoherent(struct devic
  }
  EXPORT_SYMBOL(dma_alloc_noncoherent);
  
@@ -498,7 +485,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  {
  	void *ret;
  
-@@ -144,6 +125,7 @@ static void *mips_dma_alloc_coherent(str
+@@ -148,6 +142,7 @@ static void *mips_dma_alloc_coherent(str
  
  	return ret;
  }
@@ -506,7 +493,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  
  void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
-@@ -154,8 +136,8 @@ void dma_free_noncoherent(struct device
+@@ -158,8 +153,8 @@ void dma_free_noncoherent(struct device
  }
  EXPORT_SYMBOL(dma_free_noncoherent);
  
@@ -517,7 +504,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  {
  	unsigned long addr = (unsigned long) vaddr;
  	int order = get_order(size);
-@@ -170,6 +152,7 @@ static void mips_dma_free_coherent(struc
+@@ -174,6 +169,7 @@ static void mips_dma_free_coherent(struc
  
  	free_pages(addr, get_order(size));
  }
@@ -525,7 +512,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  static inline void __dma_sync_virtual(void *addr, size_t size,
  	enum dma_data_direction direction)
-@@ -198,8 +181,8 @@ static inline void __dma_sync_virtual(vo
+@@ -202,8 +198,8 @@ static inline void __dma_sync_virtual(vo
   * If highmem is not configured then the bulk of this loop gets
   * optimized out.
   */
@@ -536,15 +523,14 @@ Signed-off-by: Felix Fietkau <[email protected]>
  {
  	size_t left = size;
  
-@@ -228,109 +211,7 @@ static inline void __dma_sync(struct pag
- 		left -= len;
+@@ -233,108 +229,7 @@ static inline void __dma_sync(struct pag
  	} while (left);
  }
--
+ 
 -static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
 -	size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
 -{
--	if (cpu_is_noncoherent_r10000(dev))
+-	if (cpu_needs_post_dma_flush(dev))
 -		__dma_sync(dma_addr_to_page(dev, dma_addr),
 -			   dma_addr & ~PAGE_MASK, size, direction);
 -
@@ -595,7 +581,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 -static void mips_dma_sync_single_for_cpu(struct device *dev,
 -	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
 -{
--	if (cpu_is_noncoherent_r10000(dev))
+-	if (cpu_needs_post_dma_flush(dev))
 -		__dma_sync(dma_addr_to_page(dev, dma_handle),
 -			   dma_handle & ~PAGE_MASK, size, direction);
 -}
@@ -615,7 +601,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 -
 -	/* Make sure that gcc doesn't leave the empty loop body.  */
 -	for (i = 0; i < nelems; i++, sg++) {
--		if (cpu_is_noncoherent_r10000(dev))
+-		if (cpu_needs_post_dma_flush(dev))
 -			__dma_sync(sg_page(sg), sg->offset, sg->length,
 -				   direction);
 -	}
@@ -647,7 +633,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
  			 enum dma_data_direction direction)
-@@ -343,23 +224,10 @@ void dma_cache_sync(struct device *dev,
+@@ -347,23 +242,10 @@ void dma_cache_sync(struct device *dev,
  
  EXPORT_SYMBOL(dma_cache_sync);
  

target/linux/generic/patches-3.10/950-vm_exports.patch

@@ -52,7 +52,7 @@
   * When we die, we re-parent all our children, and try to:
 --- a/kernel/sched/core.c
 +++ b/kernel/sched/core.c
-@@ -3707,6 +3707,7 @@ int can_nice(const struct task_struct *p
+@@ -3719,6 +3719,7 @@ int can_nice(const struct task_struct *p
  	return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
  		capable(CAP_SYS_NICE));
  }

target/linux/imx6/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=cortex-a9
 CPU_SUBTYPE:=vfpv3
 MAINTAINER:=Luka Perkov <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch

@@ -47,7 +47,7 @@ Signed-off-by: Jason Cooper <[email protected]>
 
 --- a/drivers/of/address.c
 +++ b/drivers/of/address.c
-@@ -231,6 +231,73 @@ int of_pci_address_to_resource(struct de
+@@ -223,6 +223,73 @@ int of_pci_address_to_resource(struct de
  	return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
  }
  EXPORT_SYMBOL_GPL(of_pci_address_to_resource);

target/linux/ixp4xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 SUBTARGETS=generic harddisk
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch

@@ -10,7 +10,7 @@
  
  	/* Get the HEAD */
  	skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
-@@ -1085,6 +1088,10 @@ int pskb_expand_head(struct sk_buff *skb
+@@ -1082,6 +1085,10 @@ int pskb_expand_head(struct sk_buff *skb
  	if (skb_shared(skb))
  		BUG();
  

target/linux/kirkwood/Makefile

@@ -13,7 +13,7 @@ FEATURES:=targz usb jffs2_nand ubifs
 CPU_TYPE:=xscale
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/kirkwood/patches-3.10/0001-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch

@@ -50,7 +50,7 @@ Signed-off-by: Jason Cooper <[email protected]>
 
 --- a/drivers/of/address.c
 +++ b/drivers/of/address.c
-@@ -231,6 +231,73 @@ int of_pci_address_to_resource(struct de
+@@ -223,6 +223,73 @@ int of_pci_address_to_resource(struct de
  	return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
  }
  EXPORT_SYMBOL_GPL(of_pci_address_to_resource);

target/linux/lantiq/Makefile

@@ -11,7 +11,7 @@ BOARDNAME:=Lantiq GPON/XWAY/SVIP
 FEATURES:=squashfs
 SUBTARGETS=xway xrx200 ase falcon
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 CPU_TYPE:=mips32r2
 

target/linux/lantiq/patches-3.10/0012-MTD-m25p80-allow-loading-mtd-name-from-OF.patch

@@ -14,7 +14,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -925,10 +925,13 @@ static int m25p_probe(struct spi_device
+@@ -926,10 +926,13 @@ static int m25p_probe(struct spi_device
  	unsigned			i;
  	struct mtd_part_parser_data	ppdata;
  	struct device_node __maybe_unused *np = spi->dev.of_node;
@@ -28,7 +28,7 @@ Signed-off-by: John Crispin <[email protected]>
  #endif
  
  	/* Platform data helps sort out which chip type we have, as
-@@ -1004,6 +1007,8 @@ static int m25p_probe(struct spi_device
+@@ -1005,6 +1008,8 @@ static int m25p_probe(struct spi_device
  
  	if (data && data->name)
  		flash->mtd.name = data->name;

target/linux/malta/Makefile

@@ -12,7 +12,7 @@ SUBTARGETS:=le be le64 be64
 INITRAMFS_EXTRA_FILES:=
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 DEVICE_TYPE:=developerboard
 

target/linux/mpc85xx/Makefile

@@ -14,7 +14,7 @@ FEATURES:=spe_fpu squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 SUBTARGETS=generic p1020
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mvebu/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=cortex-a9
 CPU_SUBTYPE:=vfpv3
 MAINTAINER:=Luka Perkov <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/octeon/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=octeon
 CPU_CFLAGS_octeon:=-march=octeon
 MAINTAINER:=John Crispin <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc40x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs
 CPU_TYPE:=405
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc44x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs broken
 CPU_TYPE:=440
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ramips/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Ralink RT288x/RT3xxx
 SUBTARGETS:=rt305x mt7620a mt7620n mt7621 rt3883 rt288x
 FEATURES:=squashfs gpio
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=\

target/linux/ramips/patches-3.10/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch

@@ -14,7 +14,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -925,10 +925,13 @@ static int m25p_probe(struct spi_device
+@@ -926,10 +926,13 @@ static int m25p_probe(struct spi_device
  	unsigned			i;
  	struct mtd_part_parser_data	ppdata;
  	struct device_node __maybe_unused *np = spi->dev.of_node;
@@ -28,7 +28,7 @@ Signed-off-by: John Crispin <[email protected]>
  #endif
  
  	/* Platform data helps sort out which chip type we have, as
-@@ -1004,6 +1007,8 @@ static int m25p_probe(struct spi_device
+@@ -1005,6 +1008,8 @@ static int m25p_probe(struct spi_device
  
  	if (data && data->name)
  		flash->mtd.name = data->name;

target/linux/ramips/patches-3.10/0111-NET-MIPS-add-ralink-SoC-ethernet-driver.patch

@@ -46,10 +46,8 @@ Signed-off-by: John Crispin <[email protected]>
  create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
  create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
 
-Index: linux-3.10.21/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h	2013-12-09 13:26:42.320125202 +0100
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
 @@ -0,0 +1,27 @@
 +/*
 + *  Ralink RT305x SoC platform device registration
@@ -78,11 +76,9 @@ Index: linux-3.10.21/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
 +};
 +
 +#endif /* _RT305X_ESW_PLATFORM_H */
-Index: linux-3.10.21/arch/mips/ralink/rt305x.c
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/rt305x.c	2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/arch/mips/ralink/rt305x.c	2013-12-09 14:04:34.200179338 +0100
-@@ -221,6 +221,7 @@
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -221,6 +221,7 @@ void __init ralink_clk_init(void)
  	}
  
  	ralink_clk_add("cpu", cpu_rate);
@@ -90,11 +86,9 @@ Index: linux-3.10.21/arch/mips/ralink/rt305x.c
  	ralink_clk_add("10000b00.spi", sys_rate);
  	ralink_clk_add("10000100.timer", wdt_rate);
  	ralink_clk_add("10000120.watchdog", wdt_rate);
-Index: linux-3.10.21/drivers/net/ethernet/Kconfig
-===================================================================
---- linux-3.10.21.orig/drivers/net/ethernet/Kconfig	2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/drivers/net/ethernet/Kconfig	2013-12-09 13:26:42.324125203 +0100
-@@ -135,6 +135,7 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -135,6 +135,7 @@ config ETHOC
  source "drivers/net/ethernet/packetengines/Kconfig"
  source "drivers/net/ethernet/pasemi/Kconfig"
  source "drivers/net/ethernet/qlogic/Kconfig"
@@ -102,11 +96,9 @@ Index: linux-3.10.21/drivers/net/ethernet/Kconfig
  source "drivers/net/ethernet/realtek/Kconfig"
  source "drivers/net/ethernet/renesas/Kconfig"
  source "drivers/net/ethernet/rdc/Kconfig"
-Index: linux-3.10.21/drivers/net/ethernet/Makefile
-===================================================================
---- linux-3.10.21.orig/drivers/net/ethernet/Makefile	2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/drivers/net/ethernet/Makefile	2013-12-09 13:26:42.324125203 +0100
-@@ -53,6 +53,7 @@
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -53,6 +53,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
  obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
  obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
  obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
@@ -114,10 +106,8 @@ Index: linux-3.10.21/drivers/net/ethernet/Makefile
  obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
  obj-$(CONFIG_SH_ETH) += renesas/
  obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
-Index: linux-3.10.21/drivers/net/ethernet/ralink/Kconfig
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/Kconfig	2013-12-09 13:26:42.324125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Kconfig
 @@ -0,0 +1,32 @@
 +config NET_RALINK
 +	tristate "Ralink RT288X/RT3X5X/RT3662/RT3883/MT7620 ethernet driver"
@@ -151,10 +141,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/Kconfig
 +	select PHYLIB
 +	select SWCONFIG
 +endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/Makefile	2013-12-09 13:26:42.324125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Makefile
 @@ -0,0 +1,18 @@
 +#
 +# Makefile for the Ralink SoCs built-in ethernet macs
@@ -174,10 +162,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/Makefile
 +ralink-eth-$(CONFIG_SOC_MT7620)			+= soc_mt7620.o
 +
 +obj-$(CONFIG_NET_RALINK)			+= ralink-eth.o
-Index: linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.c	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.c
 @@ -0,0 +1,1463 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -1642,10 +1628,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.c
 +{
 +	platform_driver_unregister(&esw_driver);
 +}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.h	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.h
 @@ -0,0 +1,32 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -1679,10 +1663,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.h
 +
 +#endif
 +#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.c	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
 @@ -0,0 +1,566 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -2250,10 +2232,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.c
 +
 +	return 0;
 +}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.h	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
 @@ -0,0 +1,30 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -2285,10 +2265,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.h
 +extern int mt7620a_has_carrier(struct fe_priv *priv);
 +
 +#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio.c	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.c
 @@ -0,0 +1,244 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -2534,10 +2512,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio.c
 +	of_node_put(priv->mii_bus->dev.of_node);
 +	kfree(priv->mii_bus);
 +}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio.h	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.h
 @@ -0,0 +1,29 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -2568,10 +2544,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio.h
 +static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
 +#endif
 +#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.c	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
 @@ -0,0 +1,232 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -2805,10 +2779,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.c
 +
 +	return;
 +}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.h	2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
 @@ -0,0 +1,26 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -2836,10 +2808,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.h
 +void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
 +
 +#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.c	2013-12-09 14:01:00.060174130 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
 @@ -0,0 +1,846 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -3687,10 +3657,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.c
 +MODULE_LICENSE("GPL");
 +MODULE_AUTHOR("John Crispin <[email protected]>");
 +MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
-Index: linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.h	2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
 @@ -0,0 +1,384 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -4076,10 +4044,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.h
 +u32 fe_r32(unsigned reg);
 +
 +#endif /* FE_ETH_H */
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_mt7620.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_mt7620.c	2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_mt7620.c
 @@ -0,0 +1,172 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -4253,10 +4219,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_mt7620.c
 +};
 +
 +MODULE_DEVICE_TABLE(of, of_fe_match);
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt2880.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_rt2880.c	2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt2880.c
 @@ -0,0 +1,51 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -4309,10 +4273,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt2880.c
 +};
 +
 +MODULE_DEVICE_TABLE(of, of_fe_match);
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt305x.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_rt305x.c	2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt305x.c
 @@ -0,0 +1,113 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -4427,10 +4389,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt305x.c
 +};
 +
 +MODULE_DEVICE_TABLE(of, of_fe_match);
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt3883.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_rt3883.c	2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt3883.c
 @@ -0,0 +1,60 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -4492,10 +4452,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt3883.c
 +
 +MODULE_DEVICE_TABLE(of, of_fe_match);
 +
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mt7530.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mt7530.c	2013-12-09 13:26:42.336125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mt7530.c
 @@ -0,0 +1,467 @@
 +/*
 + * This program is free software; you can redistribute it and/or
@@ -4964,10 +4922,8 @@ Index: linux-3.10.21/drivers/net/ethernet/ralink/mt7530.c
 +
 +	return 0;
 +}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mt7530.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mt7530.h	2013-12-09 13:26:42.336125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mt7530.h
 @@ -0,0 +1,20 @@
 +/*
 + * This program is free software; you can redistribute it and/or

target/linux/ramips/patches-3.10/0206-MTD-add-chunked-read-io-to-m25p80.patch

@@ -8,11 +8,9 @@ Signed-off-by: John Crispin <[email protected]>
  drivers/mtd/devices/m25p80.c |  127 ++++++++++++++++++++++++++++++++++++++++++
  1 file changed, 127 insertions(+)
 
-Index: linux-3.10.21/drivers/mtd/devices/m25p80.c
-===================================================================
---- linux-3.10.21.orig/drivers/mtd/devices/m25p80.c	2013-12-09 19:34:40.828651303 +0100
-+++ linux-3.10.21/drivers/mtd/devices/m25p80.c	2013-12-09 19:40:37.636659793 +0100
-@@ -392,6 +392,57 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -392,6 +392,57 @@ static int m25p80_read(struct mtd_info *
  	return 0;
  }
  
@@ -70,7 +68,7 @@ Index: linux-3.10.21/drivers/mtd/devices/m25p80.c
  /*
   * Write an address range to the flash chip.  Data must be written in
   * FLASH_PAGESIZE chunks.  The address range may be any size provided
-@@ -479,6 +530,76 @@
+@@ -479,6 +530,76 @@ static int m25p80_write(struct mtd_info
  	return 0;
  }
  
@@ -147,7 +145,7 @@ Index: linux-3.10.21/drivers/mtd/devices/m25p80.c
  static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
  		size_t *retlen, const u_char *buf)
  {
-@@ -1057,6 +1178,12 @@
+@@ -1058,6 +1179,12 @@ static int m25p_probe(struct spi_device
  		flash->fast_read = true;
  #endif
  

target/linux/ramips/patches-3.10/0300-DMA-add-rt2880-dma-engine.patch

@@ -11,11 +11,9 @@ Signed-off-by: John Crispin <[email protected]>
  3 files changed, 603 insertions(+)
  create mode 100644 drivers/dma/ralink-gdma.c
 
-Index: linux-3.10.18/drivers/dma/Kconfig
-===================================================================
---- linux-3.10.18.orig/drivers/dma/Kconfig	2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/drivers/dma/Kconfig	2013-12-04 17:52:32.852756567 +0100
-@@ -312,6 +312,12 @@
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -312,6 +312,12 @@ config MMP_PDMA
  	help
  	  Support the MMP PDMA engine for PXA and MMP platfrom.
  
@@ -28,10 +26,8 @@ Index: linux-3.10.18/drivers/dma/Kconfig
  config DMA_ENGINE
  	bool
  
-Index: linux-3.10.18/drivers/dma/ralink-gdma.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/drivers/dma/ralink-gdma.c	2013-12-05 21:17:22.245128605 +0100
+--- /dev/null
++++ b/drivers/dma/ralink-gdma.c
 @@ -0,0 +1,577 @@
 +/*
 + *  Copyright (C) 2013, Lars-Peter Clausen <[email protected]>
@@ -610,11 +606,9 @@ Index: linux-3.10.18/drivers/dma/ralink-gdma.c
 +MODULE_AUTHOR("Lars-Peter Clausen <[email protected]>");
 +MODULE_DESCRIPTION("GDMA4740 DMA driver");
 +MODULE_LICENSE("GPLv2");
-Index: linux-3.10.18/drivers/dma/dmaengine.c
-===================================================================
---- linux-3.10.18.orig/drivers/dma/dmaengine.c	2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/drivers/dma/dmaengine.c	2013-12-04 17:52:32.856756568 +0100
-@@ -504,6 +504,32 @@
+--- a/drivers/dma/dmaengine.c
++++ b/drivers/dma/dmaengine.c
+@@ -504,6 +504,32 @@ static struct dma_chan *private_candidat
  }
  
  /**
@@ -647,11 +641,9 @@ Index: linux-3.10.18/drivers/dma/dmaengine.c
   * dma_request_channel - try to allocate an exclusive channel
   * @mask: capabilities that the channel must satisfy
   * @fn: optional callback to disposition available channels
-Index: linux-3.10.18/include/linux/dmaengine.h
-===================================================================
---- linux-3.10.18.orig/include/linux/dmaengine.h	2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/include/linux/dmaengine.h	2013-12-04 17:52:32.856756568 +0100
-@@ -999,6 +999,7 @@
+--- a/include/linux/dmaengine.h
++++ b/include/linux/dmaengine.h
+@@ -999,6 +999,7 @@ static inline void dma_release_channel(s
  int dma_async_device_register(struct dma_device *device);
  void dma_async_device_unregister(struct dma_device *device);
  void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
@@ -659,11 +651,9 @@ Index: linux-3.10.18/include/linux/dmaengine.h
  struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
  struct dma_chan *net_dma_find_channel(void);
  #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
-Index: linux-3.10.18/drivers/dma/Makefile
-===================================================================
---- linux-3.10.18.orig/drivers/dma/Makefile	2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/drivers/dma/Makefile	2013-12-04 17:52:32.856756568 +0100
-@@ -38,3 +38,4 @@
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
  obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
  obj-$(CONFIG_DMA_OMAP) += omap-dma.o
  obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o

target/linux/ramips/patches-3.10/0301-asoc-add-mt7620-support.patch

@@ -19,11 +19,9 @@ Signed-off-by: John Crispin <[email protected]>
  create mode 100644 sound/soc/ralink/mt7620-pcm.c
  create mode 100644 sound/soc/ralink/mt7620-wm8960.c
 
-Index: linux-3.10.18/sound/soc/Kconfig
-===================================================================
---- linux-3.10.18.orig/sound/soc/Kconfig	2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/sound/soc/Kconfig	2013-12-04 17:52:32.884756569 +0100
-@@ -48,6 +48,7 @@
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -48,6 +48,7 @@ source "sound/soc/kirkwood/Kconfig"
  source "sound/soc/mid-x86/Kconfig"
  source "sound/soc/mxs/Kconfig"
  source "sound/soc/pxa/Kconfig"
@@ -31,11 +29,9 @@ Index: linux-3.10.18/sound/soc/Kconfig
  source "sound/soc/samsung/Kconfig"
  source "sound/soc/s6000/Kconfig"
  source "sound/soc/sh/Kconfig"
-Index: linux-3.10.18/sound/soc/Makefile
-===================================================================
---- linux-3.10.18.orig/sound/soc/Makefile	2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/sound/soc/Makefile	2013-12-04 17:52:32.884756569 +0100
-@@ -26,6 +26,7 @@
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_SND_SOC)	+= nuc900/
  obj-$(CONFIG_SND_SOC)	+= omap/
  obj-$(CONFIG_SND_SOC)	+= kirkwood/
  obj-$(CONFIG_SND_SOC)	+= pxa/
@@ -43,10 +39,8 @@ Index: linux-3.10.18/sound/soc/Makefile
  obj-$(CONFIG_SND_SOC)	+= samsung/
  obj-$(CONFIG_SND_SOC)	+= s6000/
  obj-$(CONFIG_SND_SOC)	+= sh/
-Index: linux-3.10.18/sound/soc/ralink/Kconfig
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/Kconfig	2013-12-04 17:52:32.884756569 +0100
+--- /dev/null
++++ b/sound/soc/ralink/Kconfig
 @@ -0,0 +1,15 @@
 +config SND_MT7620_SOC_I2S
 +	depends on SOC_MT7620 && SND_SOC
@@ -63,10 +57,8 @@ Index: linux-3.10.18/sound/soc/ralink/Kconfig
 +	help
 +	  Say Y if you want to add support for ASoC audio on the Qi LB60 board
 +	  a.k.a Qi Ben NanoNote.
-Index: linux-3.10.18/sound/soc/ralink/Makefile
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/Makefile	2013-12-04 17:52:32.884756569 +0100
+--- /dev/null
++++ b/sound/soc/ralink/Makefile
 @@ -0,0 +1,11 @@
 +#
 +# Jz4740 Platform Support
@@ -79,10 +71,8 @@ Index: linux-3.10.18/sound/soc/ralink/Makefile
 +snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
 +
 +obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
-Index: linux-3.10.18/sound/soc/ralink/mt7620-i2s.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/mt7620-i2s.c	2013-12-05 21:18:46.913130624 +0100
+--- /dev/null
++++ b/sound/soc/ralink/mt7620-i2s.c
 @@ -0,0 +1,466 @@
 +/*
 + *  Copyright (C) 2010, Lars-Peter Clausen <[email protected]>
@@ -550,10 +540,8 @@ Index: linux-3.10.18/sound/soc/ralink/mt7620-i2s.c
 +MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
 +MODULE_LICENSE("GPL");
 +MODULE_ALIAS("platform:mt7620-i2s");
-Index: linux-3.10.18/sound/soc/ralink/mt7620-wm8960.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/mt7620-wm8960.c	2013-12-04 17:52:32.884756569 +0100
+--- /dev/null
++++ b/sound/soc/ralink/mt7620-wm8960.c
 @@ -0,0 +1,125 @@
 +/*
 + * Copyright (C) 2009, Lars-Peter Clausen <[email protected]>
@@ -680,10 +668,8 @@ Index: linux-3.10.18/sound/soc/ralink/mt7620-wm8960.c
 +MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
 +MODULE_LICENSE("GPL v2");
 +MODULE_ALIAS("platform:qi-lb60-audio");
-Index: linux-3.10.18/arch/mips/ralink/of.c
-===================================================================
---- linux-3.10.18.orig/arch/mips/ralink/of.c	2013-12-04 17:52:32.736756565 +0100
-+++ linux-3.10.18/arch/mips/ralink/of.c	2013-12-04 17:52:32.884756569 +0100
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
 @@ -15,6 +15,7 @@
  #include <linux/of_fdt.h>
  #include <linux/kernel.h>
@@ -700,10 +686,8 @@ Index: linux-3.10.18/arch/mips/ralink/of.c
  __iomem void *rt_memc_membase;
  
  extern struct boot_param_header __dtb_start;
-Index: linux-3.10.18/sound/soc/soc-io.c
-===================================================================
---- linux-3.10.18.orig/sound/soc/soc-io.c	2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/sound/soc/soc-io.c	2013-12-04 17:52:32.888756569 +0100
+--- a/sound/soc/soc-io.c
++++ b/sound/soc/soc-io.c
 @@ -19,7 +19,6 @@
  
  #include <trace/events/asoc.h>
@@ -712,7 +696,7 @@ Index: linux-3.10.18/sound/soc/soc-io.c
  static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
  		    unsigned int value)
  {
-@@ -161,12 +160,3 @@
+@@ -161,12 +160,3 @@ int snd_soc_codec_set_cache_io(struct sn
  	return PTR_RET(codec->control_data);
  }
  EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);

target/linux/ramips/patches-3.10/0500-spi-mt7621.patch

@@ -1,7 +1,5 @@
-Index: linux-3.10.21/drivers/spi/spi-rt2880.c
-===================================================================
---- linux-3.10.21.orig/drivers/spi/spi-rt2880.c	2013-12-09 20:17:54.380713104 +0100
-+++ linux-3.10.21/drivers/spi/spi-rt2880.c	2013-12-09 20:35:08.004737585 +0100
+--- a/drivers/spi/spi-rt2880.c
++++ b/drivers/spi/spi-rt2880.c
 @@ -21,8 +21,11 @@
  #include <linux/io.h>
  #include <linux/reset.h>
@@ -40,7 +38,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  struct rt2880_spi {
  	struct spi_master	*master;
  	void __iomem		*base;
-@@ -70,6 +92,8 @@
+@@ -70,6 +92,8 @@ struct rt2880_spi {
  	unsigned int		speed;
  	struct clk		*clk;
  	spinlock_t		lock;
@@ -49,7 +47,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  };
  
  static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-@@ -149,6 +173,17 @@
+@@ -149,6 +173,17 @@ static int rt2880_spi_baudrate_set(struc
  	return 0;
  }
  
@@ -67,7 +65,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  /*
   * called only when no transfer is active on the bus
   */
-@@ -164,7 +199,7 @@
+@@ -164,7 +199,7 @@ rt2880_spi_setup_transfer(struct spi_dev
  
  	if (rs->speed != speed) {
  		dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
@@ -76,7 +74,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  		if (rc)
  			return rc;
  	}
-@@ -180,6 +215,17 @@
+@@ -180,6 +215,17 @@ static void rt2880_spi_set_cs(struct rt2
  		rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
  }
  
@@ -94,7 +92,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
  {
  	int i;
-@@ -198,8 +244,26 @@
+@@ -198,8 +244,26 @@ static inline int rt2880_spi_wait_till_r
  	return -ETIMEDOUT;
  }
  
@@ -122,7 +120,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  {
  	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
  	unsigned count = 0;
-@@ -239,6 +303,100 @@
+@@ -239,6 +303,100 @@ out:
  	return count;
  }
  
@@ -223,7 +221,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  static int rt2880_spi_transfer_one_message(struct spi_master *master,
  					   struct spi_message *m)
  {
-@@ -280,25 +438,25 @@
+@@ -280,25 +438,25 @@ static int rt2880_spi_transfer_one_messa
  		}
  
  		if (!cs_active) {
@@ -253,7 +251,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  
  	m->status = status;
  	spi_finalize_current_message(master);
-@@ -334,8 +492,41 @@
+@@ -334,8 +492,41 @@ static void rt2880_spi_reset(struct rt28
  	rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
  }
  
@@ -295,7 +293,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  	struct spi_master *master;
  	struct rt2880_spi *rs;
  	unsigned long flags;
-@@ -344,6 +535,10 @@
+@@ -344,6 +535,10 @@ static int rt2880_spi_probe(struct platf
  	int status = 0;
  	struct clk *clk;
  
@@ -306,7 +304,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  	base = devm_ioremap_resource(&pdev->dev, r);
  	if (IS_ERR(base))
-@@ -382,12 +577,13 @@
+@@ -382,12 +577,13 @@ static int rt2880_spi_probe(struct platf
  	rs->clk = clk;
  	rs->master = master;
  	rs->sys_freq = clk_get_rate(rs->clk);
@@ -321,7 +319,7 @@ Index: linux-3.10.21/drivers/spi/spi-rt2880.c
  
  	return spi_register_master(master);
  }
-@@ -408,12 +604,6 @@
+@@ -408,12 +604,6 @@ static int rt2880_spi_remove(struct plat
  
  MODULE_ALIAS("platform:" DRIVER_NAME);
  

target/linux/ramips/patches-3.10/0501-MIPS-increase-GIC_INTR_MAX.patch

@@ -8,8 +8,6 @@ Signed-off-by: John Crispin <[email protected]>
  arch/mips/include/asm/gic.h |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
-index b2e3e93..2902d93 100644
 --- a/arch/mips/include/asm/gic.h
 +++ b/arch/mips/include/asm/gic.h
 @@ -19,7 +19,7 @@
@@ -21,6 +19,3 @@ index b2e3e93..2902d93 100644
  
  #define MSK(n) ((1 << (n)) - 1)
  #define REG32(addr)		(*(volatile unsigned int *) (addr))
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.10/0502-MIPS-ralink-add-MT7621-support.patch

@@ -18,10 +18,8 @@ Signed-off-by: John Crispin <[email protected]>
  create mode 100644 arch/mips/ralink/malta-amon.c
  create mode 100644 arch/mips/ralink/mt7621.c
 
-Index: linux-3.10.21/arch/mips/include/asm/mach-ralink/mt7621.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/include/asm/mach-ralink/mt7621.h	2013-12-09 19:52:51.752677298 +0100
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/mt7621.h
 @@ -0,0 +1,39 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it
@@ -62,10 +60,8 @@ Index: linux-3.10.21/arch/mips/include/asm/mach-ralink/mt7621.h
 +#define MIPS_GIC_IRQ_BASE           (MIPS_CPU_IRQ_BASE + 8)
 +
 +#endif
-Index: linux-3.10.21/arch/mips/ralink/Kconfig
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/Kconfig	2013-12-09 19:51:55.600675960 +0100
-+++ linux-3.10.21/arch/mips/ralink/Kconfig	2013-12-09 19:52:51.756677296 +0100
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
 @@ -1,5 +1,10 @@
  if RALINK
  
@@ -77,7 +73,7 @@ Index: linux-3.10.21/arch/mips/ralink/Kconfig
  config CLKEVT_RT3352
  	bool "Systick Clockevent source"
  	depends on SOC_RT305X || SOC_MT7620
-@@ -35,6 +40,15 @@
+@@ -35,6 +40,15 @@ choice
  		select USB_ARCH_HAS_EHCI
  		select HW_HAS_PCI
  
@@ -93,7 +89,7 @@ Index: linux-3.10.21/arch/mips/ralink/Kconfig
  endchoice
  
  choice
-@@ -62,6 +76,10 @@
+@@ -62,6 +76,10 @@ choice
  		bool "MT7620A eval kit"
  		depends on SOC_MT7620
  
@@ -104,10 +100,8 @@ Index: linux-3.10.21/arch/mips/ralink/Kconfig
  endchoice
  
  endif
-Index: linux-3.10.21/arch/mips/ralink/Makefile
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/Makefile	2013-12-09 19:51:55.600675960 +0100
-+++ linux-3.10.21/arch/mips/ralink/Makefile	2013-12-09 19:52:51.756677296 +0100
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
 @@ -6,7 +6,11 @@
  # Copyright (C) 2009-2011 Gabor Juhos <[email protected]>
  # Copyright (C) 2013 John Crispin <[email protected]>
@@ -121,7 +115,7 @@ Index: linux-3.10.21/arch/mips/ralink/Makefile
  
  obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
  
-@@ -16,6 +20,7 @@
+@@ -16,6 +20,7 @@ obj-$(CONFIG_SOC_RT288X) += rt288x.o
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
  obj-$(CONFIG_SOC_RT3883) += rt3883.o
  obj-$(CONFIG_SOC_MT7620) += mt7620.o
@@ -129,11 +123,9 @@ Index: linux-3.10.21/arch/mips/ralink/Makefile
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
-Index: linux-3.10.21/arch/mips/ralink/Platform
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/Platform	2013-12-09 19:51:55.000000000 +0100
-+++ linux-3.10.21/arch/mips/ralink/Platform	2013-12-09 19:53:54.660678800 +0100
-@@ -26,3 +26,10 @@
+--- a/arch/mips/ralink/Platform
++++ b/arch/mips/ralink/Platform
+@@ -26,3 +26,10 @@ cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctr
  # Ralink MT7620
  #
  load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
@@ -144,10 +136,8 @@ Index: linux-3.10.21/arch/mips/ralink/Platform
 +#
 +load-$(CONFIG_SOC_MT7621)	+= 0xffffffff80001000
 +cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
-Index: linux-3.10.21/arch/mips/ralink/irq-gic.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/ralink/irq-gic.c	2013-12-09 19:52:51.756677296 +0100
+--- /dev/null
++++ b/arch/mips/ralink/irq-gic.c
 @@ -0,0 +1,255 @@
 +#include <linux/init.h>
 +#include <linux/sched.h>
@@ -404,10 +394,8 @@ Index: linux-3.10.21/arch/mips/ralink/irq-gic.c
 +{
 +	of_irq_init(of_irq_ids);
 +}
-Index: linux-3.10.21/arch/mips/ralink/malta-amon.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/ralink/malta-amon.c	2013-12-09 19:52:51.756677296 +0100
+--- /dev/null
++++ b/arch/mips/ralink/malta-amon.c
 @@ -0,0 +1,81 @@
 +/*
 + * Copyright (C) 2007  MIPS Technologies, Inc.
@@ -490,10 +478,8 @@ Index: linux-3.10.21/arch/mips/ralink/malta-amon.c
 +	smp_rmb();	/* Target will be updating flags soon */
 +	pr_debug("launch: cpu%d gone!\n", cpu);
 +}
-Index: linux-3.10.21/arch/mips/ralink/mt7621.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/ralink/mt7621.c	2013-12-09 19:52:51.760677296 +0100
+--- /dev/null
++++ b/arch/mips/ralink/mt7621.c
 @@ -0,0 +1,186 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it

target/linux/ramips/patches-3.10/0503-MIPS-ralink-add-MT7621-early_printk-support.patch

@@ -8,10 +8,8 @@ Signed-off-by: John Crispin <[email protected]>
  arch/mips/ralink/early_printk.c |   10 +++++++---
  1 file changed, 7 insertions(+), 3 deletions(-)
 
-Index: linux-3.10.21/arch/mips/ralink/early_printk.c
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/early_printk.c	2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/arch/mips/ralink/early_printk.c	2013-12-09 20:11:51.600704498 +0100
+--- a/arch/mips/ralink/early_printk.c
++++ b/arch/mips/ralink/early_printk.c
 @@ -13,6 +13,8 @@
  
  #ifdef CONFIG_SOC_RT288X
@@ -21,7 +19,7 @@ Index: linux-3.10.21/arch/mips/ralink/early_printk.c
  #else
  #define EARLY_UART_BASE         0x10000c00
  #endif
-@@ -40,9 +42,13 @@
+@@ -40,9 +42,13 @@ static inline u32 uart_r32(unsigned reg)
  
  void prom_putchar(unsigned char ch)
  {

target/linux/ramips/patches-3.10/0504-MIPS-ralink-add-pcie-driver.patch

@@ -10,21 +10,16 @@ Signed-off-by: John Crispin <[email protected]>
  2 files changed, 798 insertions(+)
  create mode 100644 arch/mips/pci/pci-mt7621.c
 
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 719e455..80886fe 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+@@ -44,6 +44,7 @@ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o
+ obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620a.o
+ obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
  obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
 +obj-$(CONFIG_SOC_MT7621)	+= pci-mt7621.o
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c
-new file mode 100644
-index 0000000..0b58fce
 --- /dev/null
 +++ b/arch/mips/pci/pci-mt7621.c
 @@ -0,0 +1,797 @@
@@ -825,6 +820,3 @@ index 0000000..0b58fce
 +{
 +	return 0;
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.10/0505-watchdog-add-MT7621-support.patch

@@ -11,11 +11,9 @@ Signed-off-by: John Crispin <[email protected]>
  3 files changed, 193 insertions(+)
  create mode 100644 drivers/watchdog/mt7621_wdt.c
 
-Index: linux-3.10.21/drivers/watchdog/Kconfig
-===================================================================
---- linux-3.10.21.orig/drivers/watchdog/Kconfig	2013-12-09 19:56:09.360682007 +0100
-+++ linux-3.10.21/drivers/watchdog/Kconfig	2013-12-09 19:59:20.636686594 +0100
-@@ -1116,7 +1116,14 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1116,7 +1116,14 @@ config LANTIQ_WDT
  config RALINK_WDT
  	tristate "Ralink SoC watchdog"
  	select WATCHDOG_CORE
@@ -31,11 +29,9 @@ Index: linux-3.10.21/drivers/watchdog/Kconfig
  	help
  	  Hardware driver for the Ralink SoC Watchdog Timer.
  
-Index: linux-3.10.21/drivers/watchdog/Makefile
-===================================================================
---- linux-3.10.21.orig/drivers/watchdog/Makefile	2013-12-09 19:56:09.360682007 +0100
-+++ linux-3.10.21/drivers/watchdog/Makefile	2013-12-09 19:56:09.752682016 +0100
-@@ -136,6 +136,7 @@
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -136,6 +136,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
  octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
  obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
  obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
@@ -43,10 +39,8 @@ Index: linux-3.10.21/drivers/watchdog/Makefile
  
  # PARISC Architecture
  
-Index: linux-3.10.21/drivers/watchdog/mt7621_wdt.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/watchdog/mt7621_wdt.c	2013-12-09 19:56:09.752682016 +0100
+--- /dev/null
++++ b/drivers/watchdog/mt7621_wdt.c
 @@ -0,0 +1,185 @@
 +/*
 + * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer

target/linux/ramips/patches-3.10/0506-GPIO-ralink-add-mt7621-gpio-controller.patch

@@ -12,11 +12,9 @@ Signed-off-by: John Crispin <[email protected]>
  4 files changed, 191 insertions(+)
  create mode 100644 drivers/gpio/gpio-mt7621.c
 
-Index: linux-3.10.21/drivers/gpio/Kconfig
-===================================================================
---- linux-3.10.21.orig/drivers/gpio/Kconfig	2013-12-09 19:56:09.376682007 +0100
-+++ linux-3.10.21/drivers/gpio/Kconfig	2013-12-09 19:58:35.372685422 +0100
-@@ -710,6 +710,12 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -710,6 +710,12 @@ config GPIO_MSIC
  	  Enable support for GPIO on intel MSIC controllers found in
  	  intel MID devices
  
@@ -29,19 +27,15 @@ Index: linux-3.10.21/drivers/gpio/Kconfig
  comment "USB GPIO expanders:"
  
  config GPIO_VIPERBOARD
-Index: linux-3.10.21/drivers/gpio/Makefile
-===================================================================
---- linux-3.10.21.orig/drivers/gpio/Makefile	2013-12-09 19:56:09.376682007 +0100
-+++ linux-3.10.21/drivers/gpio/Makefile	2013-12-09 19:56:09.760682017 +0100
-@@ -88,3 +88,4 @@
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -88,3 +88,4 @@ obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x
  obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
  obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
  obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o
 +obj-$(CONFIG_GPIO_MT7621)	+= gpio-mt7621.o
-Index: linux-3.10.21/drivers/gpio/gpio-mt7621.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/gpio/gpio-mt7621.c	2013-12-09 19:56:09.760682017 +0100
+--- /dev/null
++++ b/drivers/gpio/gpio-mt7621.c
 @@ -0,0 +1,183 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it

target/linux/ramips/patches-3.10/0507-MTD-add-mt7621-nand-support.patch

@@ -29,11 +29,9 @@ Signed-off-by: John Crispin <[email protected]>
  create mode 100644 drivers/mtd/nand/nand_device_list.h
  create mode 100644 drivers/mtd/nand/partition.h
 
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index d885298..51ba744 100644
 --- a/drivers/mtd/nand/Kconfig
 +++ b/drivers/mtd/nand/Kconfig
-@@ -538,4 +538,10 @@ config MTD_NAND_XWAY
+@@ -544,4 +544,10 @@ config MTD_NAND_XWAY
  	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
  	  to the External Bus Unit (EBU).
  
@@ -44,20 +42,15 @@ index d885298..51ba744 100644
 +	select MTD_NAND_ECC
 +
  endif # MTD_NAND
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 542b568..c68c96c 100644
 --- a/drivers/mtd/nand/Makefile
 +++ b/drivers/mtd/nand/Makefile
-@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
+@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740
  obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
  obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
  obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
 +obj-$(CONFIG_MTK_MTD_NAND)                      += mtk_nand.o bmt.o
  
  nand-objs := nand_base.o nand_bbt.o
-diff --git a/drivers/mtd/nand/bmt.c b/drivers/mtd/nand/bmt.c
-new file mode 100644
-index 0000000..0462871
 --- /dev/null
 +++ b/drivers/mtd/nand/bmt.c
 @@ -0,0 +1,750 @@
@@ -811,9 +804,6 @@ index 0000000..0462871
 +MODULE_AUTHOR("MediaTek");
 +MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
 +#endif
-diff --git a/drivers/mtd/nand/bmt.h b/drivers/mtd/nand/bmt.h
-new file mode 100644
-index 0000000..2d30ea9
 --- /dev/null
 +++ b/drivers/mtd/nand/bmt.h
 @@ -0,0 +1,80 @@
@@ -897,9 +887,6 @@ index 0000000..2d30ea9
 +unsigned short get_mapping_block_index(int index);
 +
 +#endif                          // #ifndef __BMT_H__
-diff --git a/drivers/mtd/nand/dev-nand.c b/drivers/mtd/nand/dev-nand.c
-new file mode 100644
-index 0000000..9fb5235
 --- /dev/null
 +++ b/drivers/mtd/nand/dev-nand.c
 @@ -0,0 +1,63 @@
@@ -966,9 +953,6 @@ index 0000000..9fb5235
 +	return retval;
 +}
 +arch_initcall(mtk_nand_register);
-diff --git a/drivers/mtd/nand/mt6575_typedefs.h b/drivers/mtd/nand/mt6575_typedefs.h
-new file mode 100644
-index 0000000..a7b9647
 --- /dev/null
 +++ b/drivers/mtd/nand/mt6575_typedefs.h
 @@ -0,0 +1,340 @@
@@ -1312,9 +1296,6 @@ index 0000000..a7b9647
 +
 +#endif  // _MT6575_TYPEDEFS_H
 +
-diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
-new file mode 100644
-index 0000000..00e150c
 --- /dev/null
 +++ b/drivers/mtd/nand/mtk_nand.c
 @@ -0,0 +1,2304 @@
@@ -3622,9 +3603,6 @@ index 0000000..00e150c
 +module_init(mtk_nand_init);
 +module_exit(mtk_nand_exit);
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/mtd/nand/mtk_nand.h b/drivers/mtd/nand/mtk_nand.h
-new file mode 100644
-index 0000000..6db88c4
 --- /dev/null
 +++ b/drivers/mtd/nand/mtk_nand.h
 @@ -0,0 +1,452 @@
@@ -4080,11 +4058,9 @@ index 0000000..6db88c4
 +extern u32	CFG_BLOCKSIZE;
 +#endif
 +#endif
-diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
-index d340b2f..d83655f 100644
 --- a/drivers/mtd/nand/nand_base.c
 +++ b/drivers/mtd/nand/nand_base.c
-@@ -90,7 +90,7 @@ static struct nand_ecclayout nand_oob_128 = {
+@@ -90,7 +90,7 @@ static struct nand_ecclayout nand_oob_12
  		 .length = 78} }
  };
  
@@ -4093,7 +4069,7 @@ index d340b2f..d83655f 100644
  
  static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
  			     struct mtd_oob_ops *ops);
-@@ -128,7 +128,7 @@ static int check_offs_len(struct mtd_info *mtd,
+@@ -128,7 +128,7 @@ static int check_offs_len(struct mtd_inf
   *
   * Release chip lock and wake up anyone waiting on the device.
   */
@@ -4102,7 +4078,7 @@ index d340b2f..d83655f 100644
  {
  	struct nand_chip *chip = mtd->priv;
  
-@@ -736,7 +736,7 @@ static void panic_nand_get_device(struct nand_chip *chip,
+@@ -739,7 +739,7 @@ static void panic_nand_get_device(struct
   *
   * Get the device and lock it for exclusive access
   */
@@ -4111,12 +4087,10 @@ index d340b2f..d83655f 100644
  nand_get_device(struct mtd_info *mtd, int new_state)
  {
  	struct nand_chip *chip = mtd->priv;
-diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
-index bc06196..da93baf 100644
 --- a/drivers/mtd/nand/nand_bbt.c
 +++ b/drivers/mtd/nand/nand_bbt.c
-@@ -1391,5 +1391,24 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
- 	return ret;
+@@ -1378,6 +1378,25 @@ int nand_isbad_bbt(struct mtd_info *mtd,
+ 	return 1;
  }
  
 +void nand_bbt_set(struct mtd_info *mtd, int page, int flag)
@@ -4140,9 +4114,7 @@ index bc06196..da93baf 100644
 +
  EXPORT_SYMBOL(nand_scan_bbt);
  EXPORT_SYMBOL(nand_default_bbt);
-diff --git a/drivers/mtd/nand/nand_def.h b/drivers/mtd/nand/nand_def.h
-new file mode 100644
-index 0000000..82e957d
+ EXPORT_SYMBOL_GPL(nand_update_bbt);
 --- /dev/null
 +++ b/drivers/mtd/nand/nand_def.h
 @@ -0,0 +1,123 @@
@@ -4269,9 +4241,6 @@ index 0000000..82e957d
 +#include "mt6575_typedefs.h"
 +
 +#endif /* __NAND_DEF_H__ */
-diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
-new file mode 100644
-index 0000000..4c36b3a
 --- /dev/null
 +++ b/drivers/mtd/nand/nand_device_list.h
 @@ -0,0 +1,55 @@
@@ -4330,9 +4299,6 @@ index 0000000..4c36b3a
 +
 +
 +#endif
-diff --git a/drivers/mtd/nand/partition.h b/drivers/mtd/nand/partition.h
-new file mode 100644
-index 0000000..034e1af
 --- /dev/null
 +++ b/drivers/mtd/nand/partition.h
 @@ -0,0 +1,115 @@
@@ -4451,6 +4417,3 @@ index 0000000..034e1af
 +//#endif
 +#undef RECONFIG_PARTITION_SIZE
 +
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.10/800-eco.patch

@@ -1,7 +1,5 @@
-Index: linux-3.10.18/arch/mips/include/asm/mach-ralink/mt7620.h
-===================================================================
---- linux-3.10.18.orig/arch/mips/include/asm/mach-ralink/mt7620.h	2013-12-06 16:20:27.753388970 +0100
-+++ linux-3.10.18/arch/mips/include/asm/mach-ralink/mt7620.h	2013-12-06 16:21:14.021390074 +0100
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
 @@ -101,4 +101,9 @@
  #define MT7620_GPIO_MODE_EPHY		15
  #define MT7620_GPIO_MODE_PA		20

target/linux/ramips/patches-3.10/999-raeth_fixes.patch

@@ -1,8 +1,6 @@
-Index: linux-3.10.24/drivers/net/ethernet/ralink/ralink_soc_eth.c
-===================================================================
---- linux-3.10.24.orig/drivers/net/ethernet/ralink/ralink_soc_eth.c	2013-12-27 20:32:59.004068866 +0100
-+++ linux-3.10.24/drivers/net/ethernet/ralink/ralink_soc_eth.c	2013-12-27 21:16:44.892046631 +0100
-@@ -335,7 +335,7 @@
+--- a/drivers/net/ethernet/ralink/ralink_soc_eth.c
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+@@ -335,7 +335,7 @@ static int fe_start_xmit(struct sk_buff
  	if (priv->soc->tso)
  		fe_start_tso(skb, dev, nr_frags, tx);
  

target/linux/rb532/Makefile

@@ -11,7 +11,7 @@ BOARD:=rb532
 BOARDNAME:=Mikrotik RouterBoard 532
 FEATURES:=pci targz broken
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532

target/linux/realview/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=mpcore
 CPU_SUBTYPE:=vfp
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 DEVICE_TYPE:=developerboard
 

target/linux/sparc/Makefile

@@ -11,7 +11,7 @@ BOARD:=sparc
 BOARDNAME:=Sun UltraSPARC
 FEATURES+=fpu tgz ext4 squashfs broken
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 MAINTAINER:=Imre Kaloz <[email protected]>
 
 include $(INCLUDE_DIR)/target.mk

target/linux/x86/alix2/target.mk

@@ -19,7 +19,7 @@ DEFAULT_PACKAGES += \
 			kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
 			kmod-ledtrig-netdev \
 			kmod-cpu-msr hwclock wpad
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 CS5535_MASK:=0x0b000042
 
 CPU_TYPE := geode

target/linux/x86/generic/target.mk

@@ -1,6 +1,6 @@
 BOARDNAME:=Generic
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 define Target/Description
 	Build firmware images for x86 based boards

target/linux/x86/kvm_guest/target.mk

@@ -2,4 +2,4 @@ BOARDNAME:=KVM Guest
 FEATURES:=ext4 pci usb
 DEFAULT_PACKAGES += kmod-virtio-balloon kmod-virtio-net kmod-virtio-random
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26

target/linux/x86_64/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=x86_64
 FEATURES:=ext4 vdi vmdk targz
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 KERNELNAME:=bzImage
 

target/linux/xburst/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Ingenic XBurst
 FEATURES:=targz ubifs audio
 SUBTARGETS:=qi_lb60 n516 n526 id800wt
 
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
 
 DEVICE_TYPE=other
 

target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch

@@ -106,7 +106,7 @@ Signed-off-by: Lars-Peter Clausen <[email protected]>
  			else
  				ret = chip->ecc.read_page(mtd, chip, bufpoi,
  							  oob_required, page);
-@@ -3477,8 +3546,13 @@ int nand_scan_tail(struct mtd_info *mtd)
+@@ -3488,8 +3557,13 @@ int nand_scan_tail(struct mtd_info *mtd)
  				   "hardware ECC not possible\n");
  			BUG();
  		}