|
@@ -0,0 +1,109 @@
|
|
|
+From 531ef5ebea96394ddb7f554d4d88e017dde30a59 Mon Sep 17 00:00:00 2001
|
|
|
+From: Amelie Delaunay <[email protected]>
|
|
|
+Date: Tue, 13 Feb 2018 09:28:12 +0100
|
|
|
+Subject: [PATCH] usb: dwc2: add support for host mode external vbus supply
|
|
|
+
|
|
|
+This patch adds a way to enable an external vbus supply in host mode,
|
|
|
+when dwc2 drvvbus signal is not used.
|
|
|
+
|
|
|
+This patch is very similar to the one done in U-Boot dwc2 driver [1]. It
|
|
|
+also adds dynamic vbus supply management depending on the role and state
|
|
|
+of the core.
|
|
|
+
|
|
|
+[1] https://lists.denx.de/pipermail/u-boot/2017-March/283434.html
|
|
|
+
|
|
|
+Signed-off-by: Amelie Delaunay <[email protected]>
|
|
|
+Signed-off-by: Felipe Balbi <[email protected]>
|
|
|
+---
|
|
|
+ drivers/usb/dwc2/core.h | 2 ++
|
|
|
+ drivers/usb/dwc2/hcd.c | 26 ++++++++++++++++++++++++++
|
|
|
+ 2 files changed, 28 insertions(+)
|
|
|
+
|
|
|
+--- a/drivers/usb/dwc2/core.h
|
|
|
++++ b/drivers/usb/dwc2/core.h
|
|
|
+@@ -777,6 +777,7 @@ struct dwc2_hregs_backup {
|
|
|
+ * @plat: The platform specific configuration data. This can be
|
|
|
+ * removed once all SoCs support usb transceiver.
|
|
|
+ * @supplies: Definition of USB power supplies
|
|
|
++ * @vbus_supply: Regulator supplying vbus.
|
|
|
+ * @phyif: PHY interface width
|
|
|
+ * @lock: Spinlock that protects all the driver data structures
|
|
|
+ * @priv: Stores a pointer to the struct usb_hcd
|
|
|
+@@ -913,6 +914,7 @@ struct dwc2_hsotg {
|
|
|
+ struct usb_phy *uphy;
|
|
|
+ struct dwc2_hsotg_plat *plat;
|
|
|
+ struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
|
|
|
++ struct regulator *vbus_supply;
|
|
|
+ u32 phyif;
|
|
|
+
|
|
|
+ spinlock_t lock;
|
|
|
+--- a/drivers/usb/dwc2/hcd.c
|
|
|
++++ b/drivers/usb/dwc2/hcd.c
|
|
|
+@@ -359,6 +359,23 @@ static void dwc2_gusbcfg_init(struct dwc
|
|
|
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
|
|
|
+ }
|
|
|
+
|
|
|
++static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg)
|
|
|
++{
|
|
|
++ hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
|
|
|
++ if (IS_ERR(hsotg->vbus_supply))
|
|
|
++ return 0;
|
|
|
++
|
|
|
++ return regulator_enable(hsotg->vbus_supply);
|
|
|
++}
|
|
|
++
|
|
|
++static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg)
|
|
|
++{
|
|
|
++ if (hsotg->vbus_supply)
|
|
|
++ return regulator_disable(hsotg->vbus_supply);
|
|
|
++
|
|
|
++ return 0;
|
|
|
++}
|
|
|
++
|
|
|
+ /**
|
|
|
+ * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
|
|
|
+ *
|
|
|
+@@ -3246,6 +3263,7 @@ static void dwc2_conn_id_status_change(s
|
|
|
+
|
|
|
+ /* B-Device connector (Device Mode) */
|
|
|
+ if (gotgctl & GOTGCTL_CONID_B) {
|
|
|
++ dwc2_vbus_supply_exit(hsotg);
|
|
|
+ /* Wait for switch to device mode */
|
|
|
+ dev_dbg(hsotg->dev, "connId B\n");
|
|
|
+ if (hsotg->bus_suspended) {
|
|
|
+@@ -4352,6 +4370,9 @@ static int _dwc2_hcd_start(struct usb_hc
|
|
|
+ }
|
|
|
+
|
|
|
+ spin_unlock_irqrestore(&hsotg->lock, flags);
|
|
|
++
|
|
|
++ dwc2_vbus_supply_init(hsotg);
|
|
|
++
|
|
|
+ return 0;
|
|
|
+ }
|
|
|
+
|
|
|
+@@ -4379,6 +4400,8 @@ static void _dwc2_hcd_stop(struct usb_hc
|
|
|
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
|
+ spin_unlock_irqrestore(&hsotg->lock, flags);
|
|
|
+
|
|
|
++ dwc2_vbus_supply_exit(hsotg);
|
|
|
++
|
|
|
+ usleep_range(1000, 3000);
|
|
|
+ }
|
|
|
+
|
|
|
+@@ -4415,6 +4438,7 @@ static int _dwc2_hcd_suspend(struct usb_
|
|
|
+ hprt0 |= HPRT0_SUSP;
|
|
|
+ hprt0 &= ~HPRT0_PWR;
|
|
|
+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
|
|
|
++ dwc2_vbus_supply_exit(hsotg);
|
|
|
+ }
|
|
|
+
|
|
|
+ /* Enter hibernation */
|
|
|
+@@ -4495,6 +4519,8 @@ static int _dwc2_hcd_resume(struct usb_h
|
|
|
+ spin_unlock_irqrestore(&hsotg->lock, flags);
|
|
|
+ dwc2_port_resume(hsotg);
|
|
|
+ } else {
|
|
|
++ dwc2_vbus_supply_init(hsotg);
|
|
|
++
|
|
|
+ /* Wait for controller to correctly update D+/D- level */
|
|
|
+ usleep_range(3000, 5000);
|
|
|
+
|