kernel: bump 5.4 to 5.4.71

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              lantiq/Easybox 904 xDSL
Run-tested:   ipq806x/R7800, lantiq/Easybox 904 xDSL

No dmesg regressions, everything functional

Signed-off-by: John Audia <[email protected]>
[add lantiq test reports]
Signed-off-by: Adrian Schmutzler <[email protected]>

include/kernel-version.mk

@@ -7,10 +7,10 @@ ifdef CONFIG_TESTING_KERNEL
 endif
 
 LINUX_VERSION-4.19 = .138
-LINUX_VERSION-5.4 = .70
+LINUX_VERSION-5.4 = .71
 
 LINUX_KERNEL_HASH-4.19.138 = d15c27d05f6c527269b75b30cc72972748e55720e7e00ad8abbaa4fe3b1d5e02
-LINUX_KERNEL_HASH-5.4.70 = c0b3d8085c5ba235df38b00b740e053659709e8a5ca21957a239f6bc22c45007
+LINUX_KERNEL_HASH-5.4.71 = 737049ef3cf38d46ee3b377354336cdbc1c4dd95b4e54975a70716f96c8d6cc7
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch

@@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt <[email protected]>
 
 --- a/mm/page_alloc.c
 +++ b/mm/page_alloc.c
-@@ -8486,8 +8486,6 @@ int alloc_contig_range(unsigned long sta
+@@ -8489,8 +8489,6 @@ int alloc_contig_range(unsigned long sta
  
  	/* Make sure the range is really isolated. */
  	if (test_pages_isolated(outer_start, end, false)) {

target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch

@@ -12,7 +12,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -249,6 +249,89 @@ config LED_TRIGGER_PHY
+@@ -250,6 +250,89 @@ config LED_TRIGGER_PHY
  		for any speed known to the PHY.
  
  

target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch

@@ -71,7 +71,7 @@ Signed-off-by: Tobias Wolf <[email protected]>
 
 --- a/mm/page_alloc.c
 +++ b/mm/page_alloc.c
-@@ -6860,7 +6860,7 @@ static void __ref alloc_node_mem_map(str
+@@ -6861,7 +6861,7 @@ static void __ref alloc_node_mem_map(str
  		mem_map = NODE_DATA(0)->node_mem_map;
  #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
  		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)

target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch

@@ -18,7 +18,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -329,6 +329,12 @@ config BROADCOM_PHY
+@@ -330,6 +330,12 @@ config BROADCOM_PHY
  	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
  	  BCM5481, BCM54810 and BCM5482 PHYs.
  

target/linux/ipq40xx/patches-5.4/700-net-add-qualcomm-mdio.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -580,6 +580,13 @@ config XILINX_GMII2RGMII
+@@ -581,6 +581,13 @@ config XILINX_GMII2RGMII
  	  the Reduced Gigabit Media Independent Interface(RGMII) between
  	  Ethernet physical media devices and the Gigabit Ethernet controller.
  

target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -587,6 +587,13 @@ config MDIO_IPQ40XX
+@@ -588,6 +588,13 @@ config MDIO_IPQ40XX
  	  This driver supports the MDIO interface found in Qualcomm
  	  Atheros ipq40xx Soc chip.
  

target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch

@@ -22,7 +22,7 @@ Signed-off-by: Vladimir Oltean <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -370,6 +370,16 @@ config AT803X_PHY
+@@ -371,6 +371,16 @@ config AT803X_PHY
  	---help---
  	  Currently supports the AT8030 and AT8035 model
  

target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch

@@ -15,7 +15,7 @@ Signed-off-by: Florin Chiculita <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -478,6 +478,11 @@ config ICPLUS_PHY
+@@ -479,6 +479,11 @@ config ICPLUS_PHY
  	---help---
  	  Currently supports the IP175C and IP1001 PHYs.
  

target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -332,6 +332,8 @@ config RTL8367B_PHY
+@@ -333,6 +333,8 @@ config RTL8367B_PHY
  
  endif # RTL8366_SMI
  

target/linux/uml/patches-5.4/101-mconsole-exec.patch

@@ -153,7 +153,7 @@
  	pid_t pid;
 --- a/kernel/umh.c
 +++ b/kernel/umh.c
-@@ -75,6 +75,28 @@ static int call_usermodehelper_exec_asyn
+@@ -76,6 +76,28 @@ static int call_usermodehelper_exec_asyn
  	flush_signal_handlers(current, 1);
  	spin_unlock_irq(&current->sighand->siglock);
  
@@ -180,9 +180,9 @@
 +	}
 +
  	/*
- 	 * Our parent (unbound workqueue) runs with elevated scheduling
- 	 * priority. Avoid propagating that into the userspace child.
-@@ -353,6 +375,20 @@ static void helper_unlock(void)
+ 	 * Initial kernel threads share ther FS with init, in order to
+ 	 * get the init root directory. But we've now created a new
+@@ -362,6 +384,20 @@ static void helper_unlock(void)
  		wake_up(&running_helpers_waitq);
  }