layerscape: harmonize device strings

OpenWrt lately has harmonized device (definition) names to the
pattern vendor_model to improve overall consistency, also with
other values like the DTS compatible.

This patch applies that scheme to the layerscape target.

Since this (intentionally) creates a bigger overlap between DTS names,
compatible, and device definition name, it also moves DEVICE_DTS and
SUPPORTED_DEVICES definitions to the Device/Default blocks.

Apart from that, it also modifies several packages to use consistent
naming in order to keep the $(1) file references working.

While at it, remove one layer of complexity for the setup in
tfa-layerscape package.

Signed-off-by: Adrian Schmutzler <[email protected]>

package/boot/tfa-layerscape/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=tfa-layerscape
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/atf
@@ -37,130 +37,115 @@ define Host/Install
 	$(INSTALL_BIN) $(HOST_BUILD_DIR)/plat/nxp/tools/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef
 
-define Package/tfa-layerscape/ls1012afrdm
+define Package/tfa-generic
+  SECTION:=boot
+  CATEGORY:=Boot Loaders
+  DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-fsl_$(subst tfa-,,$(1))
+  VARIANT:=$(subst tfa-,,$(1))
+endef
+
+define Package/tfa-ls1012a-frdm
+  $(Package/tfa-generic)
   TITLE:=NXP LS1012AFRDM Trusted Firmware
   PLAT:=ls1012afrdm
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012afrdm/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012afrdm/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1012ardb
+define Package/tfa-ls1012a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1012ARDB Trusted Firmware
   PLAT:=ls1012ardb
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1012afrwy
+define Package/tfa-ls1012a-frwy-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1012AFRWY Trusted Firmware
   PLAT:=ls1012afrwy
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012afrwy/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012afrwy/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1043ardb
+define Package/tfa-ls1043a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1043ARDB Trusted Firmware
   PLAT:=ls1043ardb
   BOOT_MODE:=nor
-  BIN_BL2:=build/ls1043ardb/release/bl2_nor.pbl
-  BIN_FIP:=build/ls1043ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1043ardb-sdboot
+define Package/tfa-ls1043a-rdb-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1043ARDB SD Boot Trusted Firmware
   PLAT:=ls1043ardb
   BOOT_MODE:=sd
-  BIN_BL2:=build/ls1043ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1043ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1046ardb
+define Package/tfa-ls1046a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1046ARDB Trusted Firmware
   PLAT:=ls1046ardb
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1046ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1046ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1046ardb-sdboot
+define Package/tfa-ls1046a-rdb-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1046ARDB SD Boot Trusted Firmware
   PLAT:=ls1046ardb
   BOOT_MODE:=sd
-  BIN_BL2:=build/ls1046ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1046ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1088ardb
+define Package/tfa-ls1088a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1088ARDB Trusted Firmware
   PLAT:=ls1088ardb
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1088ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1088ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1088ardb-sdboot
+define Package/tfa-ls1088a-rdb-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1088ARDB SD Boot Trusted Firmware
   PLAT:=ls1088ardb
   BOOT_MODE:=sd
-  BIN_BL2:=build/ls1088ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1088ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls2088ardb
+define Package/tfa-ls2088a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS2088ARDB Trusted Firmware
   PLAT:=ls2088ardb
   BOOT_MODE:=nor
-  BIN_BL2:=build/ls2088ardb/release/bl2_nor.pbl
-  BIN_FIP:=build/ls2088ardb/release/fip.bin
-endef
-
-define Package/tfa-layerscape/Config
-  define Package/tfa-$(1)
-    SECTION:=boot
-    CATEGORY:=Boot Loaders
-    TITLE:=$(2)
-    DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-$(1)
-    VARIANT:=$(1)
-    BIN_BL2:=$(3)
-    BIN_FIP:=$(4)
-  endef
 endef
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
-	$(CP) $(PKG_BUILD_DIR)/$(BIN_BL2) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-bl2.pbl
-	$(CP) $(PKG_BUILD_DIR)/$(BIN_FIP) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-fip.bin
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/bl2_$(BOOT_MODE).pbl \
+		$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-bl2.pbl
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/fip.bin \
+		$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-fip.bin
 endef
 
 define Build/Compile
-	$(eval $(Package/tfa-layerscape/$(BUILD_VARIANT))) \
+	$(eval $(Package/tfa-$(BUILD_VARIANT))) \
 	$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE=$(TARGET_CROSS) \
 		fip pbl PLAT=$(PLAT) BOOT_MODE=$(BOOT_MODE) \
-		RCW=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-rcw.bin \
-		BL33=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin \
+		RCW=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-rcw.bin \
+		BL33=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-uboot.bin \
 		FIPTOOL=$(STAGING_DIR_HOST)/bin/tfa-fiptool \
 		CREATE_PBL=$(STAGING_DIR_HOST)/bin/tfa-create-pbl \
 		BYTE_SWAP=$(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef
 
 TFAS := \
-  ls1012afrdm \
-  ls1012ardb \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb
+  ls1012a-frdm \
+  ls1012a-rdb \
+  ls1012a-frwy-sdboot \
+  ls1043a-rdb \
+  ls1043a-rdb-sdboot \
+  ls1046a-rdb \
+  ls1046a-rdb-sdboot \
+  ls1088a-rdb \
+  ls1088a-rdb-sdboot \
+  ls2088a-rdb
 
 $(eval $(call HostBuild))
 $(foreach tfa,$(TFAS), \
-  $(eval $(Package/tfa-layerscape/$(tfa))) \
-  $(eval $(call Package/tfa-layerscape/Config,$(tfa),$(TITLE),$(BIN_BL2),$(BIN_FIP))) \
   $(eval $(call BuildPackage,tfa-$(tfa))) \
 )

package/boot/uboot-layerscape/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uboot-layerscape
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot
@@ -27,67 +27,67 @@ define U-Boot/Default
   ENV_SIZE:=0x2000
 endef
 
-define U-Boot/ls1012afrdm
+define U-Boot/fsl_ls1012a-frdm
   NAME:=NXP LS1012AFRDM
   UBOOT_CONFIG:=ls1012afrdm_tfa
   ENV_SIZE:=0x40000
 endef
 
-define U-Boot/ls1012ardb
+define U-Boot/fsl_ls1012a-rdb
   NAME:=NXP LS1012ARDB
   UBOOT_CONFIG:=ls1012ardb_tfa
   ENV_SIZE:=0x40000
 endef
 
-define U-Boot/ls1012afrwy
+define U-Boot/fsl_ls1012a-frwy-sdboot
   NAME:=NXP LS1012AFRWY
   UBOOT_CONFIG:=ls1012afrwy_tfa
   ENV_SIZE:=0x10000
 endef
 
-define U-Boot/ls1043ardb
+define U-Boot/fsl_ls1043a-rdb
   NAME:=NXP LS1043ARDB
   UBOOT_CONFIG:=ls1043ardb_tfa
 endef
 
-define U-Boot/ls1043ardb-sdboot
+define U-Boot/fsl_ls1043a-rdb-sdboot
   NAME:=NXP LS1043ARDB SD Card Boot
   UBOOT_CONFIG:=ls1043ardb_tfa
 endef
 
-define U-Boot/ls1046ardb
+define U-Boot/fsl_ls1046a-rdb
   NAME:=NXP LS1046ARDB
   UBOOT_CONFIG:=ls1046ardb_tfa
 endef
 
-define U-Boot/ls1046ardb-sdboot
+define U-Boot/fsl_ls1046a-rdb-sdboot
   NAME:=NXP LS1046ARDB SD Card Boot
   UBOOT_CONFIG:=ls1046ardb_tfa
 endef
 
-define U-Boot/ls1088ardb
+define U-Boot/fsl_ls1088a-rdb
   NAME:=NXP LS1088ARDB
   UBOOT_CONFIG:=ls1088ardb_tfa
 endef
 
-define U-Boot/ls1088ardb-sdboot
+define U-Boot/fsl_ls1088a-rdb-sdboot
   NAME:=NXP LS1088ARDB SD Card Boot
   UBOOT_CONFIG:=ls1088ardb_tfa
 endef
 
-define U-Boot/ls2088ardb
+define U-Boot/fsl_ls2088a-rdb
   NAME:=NXP LS2088ARDB
   UBOOT_CONFIG:=ls2088ardb_tfa
 endef
 
-define U-Boot/ls1021atwr
+define U-Boot/fsl_ls1021a-twr
   NAME:=NXP LS1021ATWR
   BUILD_SUBTARGET:=armv7
   UBOOT_CONFIG:=ls1021atwr_nor
   ENV_SIZE:=0x20000
 endef
 
-define U-Boot/ls1021atwr-sdboot
+define U-Boot/fsl_ls1021a-twr-sdboot
   NAME:=NXP LS1021ATWR SD Card Boot
   BUILD_SUBTARGET:=armv7
   UBOOT_CONFIG:=ls1021atwr_sdcard_ifc
@@ -95,7 +95,7 @@ define U-Boot/ls1021atwr-sdboot
   ENV_SIZE:=0x20000
 endef
 
-define U-Boot/ls1021aiot-sdboot
+define U-Boot/fsl_ls1021a-iot-sdboot
   NAME:=NXP LS1021AIOT SD Card Boot
   BUILD_SUBTARGET:=armv7
   UBOOT_CONFIG:=ls1021aiot_sdcard
@@ -104,19 +104,19 @@ define U-Boot/ls1021aiot-sdboot
 endef
 
 UBOOT_TARGETS := \
-  ls1012afrdm \
-  ls1012ardb \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb \
-  ls1021atwr \
-  ls1021atwr-sdboot \
-  ls1021aiot-sdboot
+  fsl_ls1012a-frdm \
+  fsl_ls1012a-rdb \
+  fsl_ls1012a-frwy-sdboot \
+  fsl_ls1043a-rdb \
+  fsl_ls1043a-rdb-sdboot \
+  fsl_ls1046a-rdb \
+  fsl_ls1046a-rdb-sdboot \
+  fsl_ls1088a-rdb \
+  fsl_ls1088a-rdb-sdboot \
+  fsl_ls2088a-rdb \
+  fsl_ls1021a-twr \
+  fsl_ls1021a-twr-sdboot \
+  fsl_ls1021a-iot-sdboot
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)

package/firmware/layerscape/fman-ucode/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=fman-ucode
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
@@ -31,9 +31,9 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1043_r1.1_106_4_18.bin \
-		$(STAGING_DIR_IMAGE)/ls1043ardb-fman.bin
+		$(STAGING_DIR_IMAGE)/fsl_ls1043a-rdb-fman.bin
 	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin \
-		$(STAGING_DIR_IMAGE)/ls1046ardb-fman.bin
+		$(STAGING_DIR_IMAGE)/fsl_ls1046a-rdb-fman.bin
 endef
 
 $(eval $(call BuildPackage,layerscape-fman))

package/firmware/layerscape/ls-dpl/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-dpl
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc-utils
@@ -33,13 +33,13 @@ MAKE_VARS+= \
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpl-eth.0x1D_0x0D.dtb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-dpl.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpl.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpc.0x1D-0x0D.dtb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-dpc.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpc.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpl-eth.0x2A_0x41.dtb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-dpl.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpl.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpc.0x2A_0x41.dtb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-dpc.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpc.dtb
 endef
 
 $(eval $(call BuildPackage,layerscape-dpl))

package/firmware/layerscape/ls-mc/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-mc
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
@@ -31,9 +31,9 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/ls1088a/mc_10.20.4_ls1088a.itb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-mc.itb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-mc.itb
 	$(CP) $(PKG_BUILD_DIR)/ls2088a/mc_10.20.4_ls2088a.itb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-mc.itb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-mc.itb
 endef
 
 $(eval $(call BuildPackage,layerscape-mc))

package/firmware/layerscape/ls-rcw/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-rcw
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
@@ -26,34 +26,34 @@ define Package/layerscape-rcw
 endef
 
 BOARDS := \
-  ls1012ardb \
-  ls1012afrdm \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb \
-  ls1021atwr
-
-RCW_ls1012ardb        :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
-RCW_ls1012afrdm       :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
-RCW_ls1012afrwy       :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
-RCW_ls1043ardb        :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
-RCW_ls1043ardb-sdboot :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
-RCW_ls1046ardb        :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
-RCW_ls1046ardb-sdboot :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
-RCW_ls1088ardb        :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
-RCW_ls1088ardb-sdboot :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
-RCW_ls2088ardb        :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
-RCW_ls1021atwr        :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
+  ls1012a-rdb \
+  ls1012a-frdm \
+  ls1012a-frwy-sdboot \
+  ls1043a-rdb \
+  ls1043a-rdb-sdboot \
+  ls1046a-rdb \
+  ls1046a-rdb-sdboot \
+  ls1088a-rdb \
+  ls1088a-rdb-sdboot \
+  ls2088a-rdb \
+  ls1021a-twr
+
+RCW_ls1012a-rdb         :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
+RCW_ls1012a-frdm        :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
+RCW_ls1012a-frwy-sdboot :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
+RCW_ls1043a-rdb         :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
+RCW_ls1043a-rdb-sdboot  :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
+RCW_ls1046a-rdb         :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
+RCW_ls1046a-rdb-sdboot  :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
+RCW_ls1088a-rdb         :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
+RCW_ls1088a-rdb-sdboot  :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
+RCW_ls2088a-rdb         :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
+RCW_ls1021a-twr         :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(foreach board,$(BOARDS), \
-		$(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/$(board)-rcw.bin;)
+		$(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/fsl_$(board)-rcw.bin;)
 endef
 
 $(eval $(call BuildPackage,layerscape-rcw))

target/linux/layerscape/image/armv7.mk

@@ -13,18 +13,19 @@ define Device/Default
   KERNEL_NAME := zImage
   KERNEL_LOADADDR := 0x80008000
   KERNEL_ENTRY_POINT := 0x80008000
+  DEVICE_DTS = $(lastword $(subst _, ,$(1)))
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
   IMAGE_SIZE := 64m
   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
     append-rootfs | pad-rootfs | \
     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
 endef
 
-define Device/ls1021atwr
+define Device/fsl_ls1021a-twr
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := TWR-LS1021A
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += layerscape-rcw
-  DEVICE_DTS := ls1021a-twr
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-rcw.bin | pad-to 1M | \
@@ -33,11 +34,10 @@ define Device/ls1021atwr
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1021a-twr
 endef
-TARGET_DEVICES += ls1021atwr
+TARGET_DEVICES += fsl_ls1021a-twr
 
-define Device/ls1021atwr-sdboot
+define Device/fsl_ls1021a-twr-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := TWR-LS1021A
   DEVICE_VARIANT := SD Card Boot
@@ -57,16 +57,16 @@ define Device/ls1021atwr-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1021a-twr-sdboot
 endef
-TARGET_DEVICES += ls1021atwr-sdboot
+TARGET_DEVICES += fsl_ls1021a-twr-sdboot
 
-define Device/ls1021aiot-sdboot
+define Device/fsl_ls1021a-iot-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1021A-IoT
   DEVICE_VARIANT := SD Card Boot
   DEVICE_DTS := ls1021a-iot
   FILESYSTEMS := ext4
+  SUPPORTED_DEVICES :=
   IMAGES := sdcard.img
   IMAGE/sdcard.img := \
     ls-clean | \
@@ -77,4 +77,4 @@ define Device/ls1021aiot-sdboot
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 endef
-TARGET_DEVICES += ls1021aiot-sdboot
+TARGET_DEVICES += fsl_ls1021a-iot-sdboot

target/linux/layerscape/image/armv8_64b.mk

@@ -12,20 +12,21 @@ define Device/Default
   KERNEL := kernel-bin | gzip | uImage gzip
   KERNEL_LOADADDR := 0x80080000
   KERNEL_ENTRY_POINT := 0x80080000
+  DEVICE_DTS = freescale/$(subst _,-,$(1))
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
   IMAGE_SIZE := 64m
   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
     append-rootfs | pad-rootfs | \
     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
 endef
 
-define Device/ls1012afrdm
+define Device/fsl_ls1012a-frdm
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := FRDM-LS1012A
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    tfa-ls1012afrdm \
+    tfa-ls1012a-frdm \
     kmod-ppfe
-  DEVICE_DTS := freescale/fsl-ls1012a-frdm
   BLOCKSIZE := 256KiB
   IMAGE/firmware.bin := \
     ls-clean | \
@@ -41,18 +42,16 @@ define Device/ls1012afrdm
     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
   KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
   KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-  SUPPORTED_DEVICES := fsl,ls1012a-frdm
 endef
-TARGET_DEVICES += ls1012afrdm
+TARGET_DEVICES += fsl_ls1012a-frdm
 
-define Device/ls1012ardb
+define Device/fsl_ls1012a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1012A-RDB
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    tfa-ls1012ardb \
+    tfa-ls1012a-rdb \
     kmod-ppfe
-  DEVICE_DTS := freescale/fsl-ls1012a-rdb
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-bl2.pbl | pad-to 1M | \
@@ -62,16 +61,15 @@ define Device/ls1012ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1012a-rdb
 endef
-TARGET_DEVICES += ls1012ardb
+TARGET_DEVICES += fsl_ls1012a-rdb
 
-define Device/ls1012afrwy
+define Device/fsl_ls1012a-frwy-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := FRWY-LS1012A
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    tfa-ls1012afrwy \
+    tfa-ls1012a-frwy-sdboot \
     kmod-ppfe
   DEVICE_DTS := freescale/fsl-ls1012a-frwy
   FILESYSTEMS := ext4
@@ -94,17 +92,16 @@ define Device/ls1012afrwy
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1012a-frwy-sdboot
 endef
-TARGET_DEVICES += ls1012afrwy
+TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
 
-define Device/ls1043ardb
+define Device/fsl_ls1043a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1043A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1043ardb \
+    tfa-ls1043a-rdb \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
   IMAGE/firmware.bin := \
@@ -116,17 +113,16 @@ define Device/ls1043ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1043a-rdb
 endef
-TARGET_DEVICES += ls1043ardb
+TARGET_DEVICES += fsl_ls1043a-rdb
 
-define Device/ls1043ardb-sdboot
+define Device/fsl_ls1043a-rdb-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1043A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1043ardb-sdboot \
+    tfa-ls1043a-rdb-sdboot \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
   FILESYSTEMS := ext4
@@ -137,7 +133,7 @@ define Device/ls1043ardb-sdboot
     ls-append $(1)-bl2.pbl | pad-to 1M | \
     ls-append $(1)-fip.bin | pad-to 5M | \
     ls-append $(1)-uboot-env.bin | pad-to 9M | \
-    ls-append ls1043ardb-fman.bin | pad-to 15M | \
+    ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@@ -146,17 +142,16 @@ define Device/ls1043ardb-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1043a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1043ardb-sdboot
+TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
 
-define Device/ls1046ardb
+define Device/fsl_ls1046a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1046A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1046ardb \
+    tfa-ls1046a-rdb \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
   IMAGE/firmware.bin := \
@@ -168,17 +163,16 @@ define Device/ls1046ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1046a-rdb
 endef
-TARGET_DEVICES += ls1046ardb
+TARGET_DEVICES += fsl_ls1046a-rdb
 
-define Device/ls1046ardb-sdboot
+define Device/fsl_ls1046a-rdb-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1046A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1046ardb-sdboot \
+    tfa-ls1046a-rdb-sdboot \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
   FILESYSTEMS := ext4
@@ -189,7 +183,7 @@ define Device/ls1046ardb-sdboot
     ls-append $(1)-bl2.pbl | pad-to 1M | \
     ls-append $(1)-fip.bin | pad-to 5M | \
     ls-append $(1)-uboot-env.bin | pad-to 9M | \
-    ls-append ls1046ardb-fman.bin | pad-to 15M | \
+    ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@@ -198,20 +192,18 @@ define Device/ls1046ardb-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1046a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1046ardb-sdboot
+TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
 
-define Device/ls1088ardb
+define Device/fsl_ls1088a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1088A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
     layerscape-mc \
     layerscape-dpl \
-    tfa-ls1088ardb \
+    tfa-ls1088a-rdb \
     restool
-  DEVICE_DTS := freescale/fsl-ls1088a-rdb
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-bl2.pbl | pad-to 1M | \
@@ -223,18 +215,17 @@ define Device/ls1088ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1088a-rdb
 endef
-TARGET_DEVICES += ls1088ardb
+TARGET_DEVICES += fsl_ls1088a-rdb
 
-define Device/ls1088ardb-sdboot
+define Device/fsl_ls1088a-rdb-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1088A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
     layerscape-mc \
     layerscape-dpl \
-    tfa-ls1088ardb-sdboot \
+    tfa-ls1088a-rdb-sdboot \
     restool
   DEVICE_DTS := freescale/fsl-ls1088a-rdb
   FILESYSTEMS := ext4
@@ -245,9 +236,9 @@ define Device/ls1088ardb-sdboot
     ls-append $(1)-bl2.pbl | pad-to 1M | \
     ls-append $(1)-fip.bin | pad-to 5M | \
     ls-append $(1)-uboot-env.bin | pad-to 10M | \
-    ls-append ls1088ardb-mc.itb | pad-to 13M | \
-    ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
-    ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
+    ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
+    ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
+    ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@@ -256,19 +247,17 @@ define Device/ls1088ardb-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1088a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1088ardb-sdboot
+TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
 
-define Device/ls2088ardb
+define Device/fsl_ls2088a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS2088ARDB
   DEVICE_PACKAGES += \
     layerscape-mc \
     layerscape-dpl \
-    tfa-ls2088ardb \
+    tfa-ls2088a-rdb \
     restool
-  DEVICE_DTS := freescale/fsl-ls2088a-rdb
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-bl2.pbl | pad-to 1M | \
@@ -280,11 +269,10 @@ define Device/ls2088ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls2088a-rdb
 endef
-TARGET_DEVICES += ls2088ardb
+TARGET_DEVICES += fsl_ls2088a-rdb
 
-define Device/traverse-ls1043
+define Device/traverse_ls1043
   DEVICE_VENDOR := Traverse
   DEVICE_MODEL := LS1043 Boards
   KERNEL_NAME := Image
@@ -314,4 +302,4 @@ define Device/traverse-ls1043
   MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
   SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 endef
-TARGET_DEVICES += traverse-ls1043
+TARGET_DEVICES += traverse_ls1043