qualcommax: 301w: populate AQR firmware name

Now that we have support for firmware loading via the kernel driver, it
makes sense to populate the firmware name as well, so if its present the
driver can load it.

In later patches, loading the FW via NVMEM will be added as well.

Signed-off-by: Robert Marko <[email protected]>

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts

@@ -276,12 +276,14 @@
 		compatible ="ethernet-phy-ieee802.3-c45";
 		reg = <0>;
 		reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+		firmware-name = "marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld";
 	};
 
 	aqr113c_8: ethernet-phy@8 {
 		compatible ="ethernet-phy-ieee802.3-c45";
 		reg = <8>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+		firmware-name = "marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld";
 	};
 
 	qca8075_16: ethernet-phy@16 {