ramips : add support for Newifi D1

Signed-off-by: BangLang Huang <[email protected]>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -235,6 +235,9 @@ mzk-ex750np)
 na930)
 	set_usb_led "$board:blue:status"
 	;;
+newifi-d1)
+	set_usb_led "$board:red:status"
+	;;
 nw718)
 	set_usb_led "$board:amber:usb"
 	;;

target/linux/ramips/base-files/etc/board.d/02_network

@@ -208,6 +208,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "4:lan" "6t@eth0"
 		;;
+	newifi-d1)
+		ucidef_set_interface_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6t@eth0" "7t@eth0"
+		ucidef_add_switch "switch1" \
+			"4:lan" "6t@eth0" "7t@eth0"
+		;;
 	rt-n56u)
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
@@ -322,6 +329,10 @@ ramips_setup_macs()
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$lan_mac" -2)
 		;;
+	newifi-d1)
+		lan_mac=$(cat /sys/class/net/eth0/address)
+		lan_mac=$(macaddr_add "$lan_mac" 2)
+		;;
 	oy-0001)
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)

target/linux/ramips/base-files/etc/diag.sh

@@ -152,6 +152,9 @@ get_status_led() {
 	nw718)
 		status_led="$board:amber:cpu"
 		;;
+	newifi-d1)
+		status_led="$board:blue:status"
+		;;
 	oy-0001|\
 	sl-r7205|\
 	zbt-we826)

target/linux/ramips/base-files/lib/ramips.sh

@@ -325,6 +325,9 @@ ramips_board_detect() {
 	*"NBG-419N")
 		name="nbg-419n"
 		;;
+	*"Newifi-D1")
+		name="newifi-d1"
+		;;
 	*"NCS601W")
 		name="ncs601w"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -96,6 +96,7 @@ platform_check_image() {
 	mzk-w300nh2|\
 	mzk-wdpr|\
 	nbg-419n|\
+	newifi-d1|\
 	nixcore|\
 	nw718|\
 	oy-0001|\

target/linux/ramips/dts/Newifi-D1.dts

@@ -0,0 +1,149 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "Newifi-D1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status-red {
+			label = "newifi-d1:red:status";
+			gpios = <&gpio0 14 1>;
+		};
+
+		status-green {
+			label = "newifi-d1:green:status";
+			gpios = <&gpio0 13 1>;
+		};
+
+		statys-blue {
+			label = "newifi-d1:blue:status";
+			gpios = <&gpio0 16 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 15 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb2power {
+			gpio-export,name = "usb2power";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 9 0>;
+		};
+
+		usb3power {
+			gpio-export,name = "usb3power";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 11 0>;
+		};
+	};
+};
+
+&sdhci {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci_pins>;
+};
+
+&xhci {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		linux,modalias = "m25p80";
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x2000000>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	pcie0 {
+		mt76@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&factory 0x8000>;
+			mediatek,2ghz = <0>;
+		};
+	};
+
+	pcie1 {
+		mt76@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&factory 0x0000>;
+			mediatek,5ghz = <0>;
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0xe000>;
+};
+
+
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
+			ralink,function = "gpio";
+		};
+	};
+};

target/linux/ramips/image/mt7621.mk

@@ -83,6 +83,14 @@ define Device/firewrt
 endef
 TARGET_DEVICES += firewrt
 
+define Device/newifi-d1
+  DTS := Newifi-D1
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  DEVICE_TITLE := Newifi D1
+  DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-i2c-mt7621
+endef
+TARGET_DEVICES += newifi-d1
+
 define Device/pbr-m1
   DTS := PBR-M1
   IMAGE_SIZE := $(ralink_default_fw_size_16M)