rockchip: fix eth1 irq affinity

NanoPi R2S and some other RK3328 boards use RTL8152 as eth1,
which is connected to xhci-hcd:usb1 but not xhci-hcd:usb3

|:~# cat /proc/interrupts
|           CPU0       CPU1       CPU2       CPU3
| 11:      53449     171813     129595      87823     GICv2  30 Level     arch_timer
| 18:          0          0          0          0     GICv2  94 Level     rockchip_usb2phy
| 19:          0          0          0          0     GICv2  32 Level     ff1f0000.dma-controller
| 20:          0          0          0          0     GICv2  33 Level     ff1f0000.dma-controller
| 21:          4          0          0          0     GICv2  89 Level     ttyS2
| 22:          0          0          0          0     GICv2  43 Level     ff350800.iommu
| 23:          0          0          0          0     GICv2 106 Level     ff360480.iommu
| 24:          0    1417932          0          0     GICv2  56 Level     eth0
| 25:        334          0          0    4422194     GICv2  99 Level     xhci-hcd:usb1
| 26:          0          0          0          0     GICv2  48 Level     ehci_hcd:usb3
| 27:          0          0          0          0     GICv2  49 Level     ohci_hcd:usb2
| 28:       3285          0          0          0     GICv2  69 Level     ff160000.i2c
| 29:          0          0          0          0  rockchip_gpio_irq  24 Level     rk805
| 30:          0          0          0          0     rk805   0 Edge      rk805_pwrkey_fall
| 35:          0          0          0          0     rk805   5 Edge      RTC alarm
| 37:          0          0          0          0     rk805   7 Edge      rk805_pwrkey_rise
| 38:          0          0          0          0     GICv2  90 Level     rockchip_thermal
| 39:          0          0          0          0     GICv2  72 Edge      ff1a0000.watchdog
| 40:       2601          0          0          0     GICv2  44 Level     dw-mci
| 41:          0          0          0          0  rockchip_gpio_irq   0 Edge      keys
|IPI0:      1559       1208        893       1131       Rescheduling interrupts
|[...]

Fix 40-net-smp-affinity to match the correct device irq name.

Signed-off-by: Furong Xu <[email protected]>

target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity

@@ -34,7 +34,7 @@ friendlyarm,nanopi-r2s|\
 xunlong,orangepi-r1-plus|\
 xunlong,orangepi-r1-plus-lts)
 	set_interface_core 2 "eth0"
-	set_interface_core 4 "eth1" "xhci-hcd:usb3"
+	set_interface_core 4 "eth1" "xhci-hcd:usb1"
 	;;
 friendlyarm,nanopi-r4s)
 	set_interface_core 10 "eth0"