|
|
@@ -1,229 +1,12 @@
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later or MIT
|
|
|
|
|
|
-#include <dt-bindings/input/input.h>
|
|
|
-#include <dt-bindings/leds/common.h>
|
|
|
-#include <dt-bindings/gpio/gpio.h>
|
|
|
-
|
|
|
/include/ "fsl/p1010si-pre.dtsi"
|
|
|
+#include "firebox-t1x.dtsi"
|
|
|
|
|
|
/ {
|
|
|
model = "Watchguard Firebox T10";
|
|
|
compatible = "watchguard,firebox-t10";
|
|
|
|
|
|
- chosen {
|
|
|
- bootargs = "console=ttyS0,115200";
|
|
|
- bootargs-override = "console=ttyS0,115200";
|
|
|
- };
|
|
|
-
|
|
|
- aliases {
|
|
|
- spi0 = &spi0;
|
|
|
- led-boot = &led_mode;
|
|
|
- led-failsafe = &led_failover;
|
|
|
- led-running = &led_mode;
|
|
|
- led-upgrade = &led_attention;
|
|
|
- /delete-property/ ethernet0;
|
|
|
- /delete-property/ ethernet1;
|
|
|
- /delete-property/ ethernet2;
|
|
|
- };
|
|
|
-
|
|
|
- memory {
|
|
|
- device_type = "memory";
|
|
|
- };
|
|
|
-
|
|
|
- leds {
|
|
|
- compatible = "gpio-leds";
|
|
|
-
|
|
|
- led_attention: attention_orange {
|
|
|
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
|
|
- label = "orange:attention";
|
|
|
- };
|
|
|
-
|
|
|
- status_red {
|
|
|
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
|
- function = LED_FUNCTION_STATUS;
|
|
|
- color = <LED_COLOR_ID_RED>;
|
|
|
- };
|
|
|
-
|
|
|
- led_mode: mode_green {
|
|
|
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
|
|
- label = "green:mode";
|
|
|
- };
|
|
|
-
|
|
|
- led_failover: failover_green {
|
|
|
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
|
|
- label = "green:failover";
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- buttons {
|
|
|
- compatible = "gpio-keys";
|
|
|
-
|
|
|
- reset {
|
|
|
- label = "Reset button";
|
|
|
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
|
|
- linux,code = <KEY_RESTART>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
-
|
|
|
- soc: soc@ffe00000 {
|
|
|
- ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
|
-
|
|
|
- i2c@3000 {
|
|
|
- rtc@30 {
|
|
|
- compatible = "sii,s35390a";
|
|
|
- reg = <0x30>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- spi0: spi@7000 {
|
|
|
- flash@0 {
|
|
|
- compatible = "jedec,spi-nor";
|
|
|
- reg = <0>;
|
|
|
- spi-max-frequency = <25000000>;
|
|
|
-
|
|
|
- partitions {
|
|
|
- compatible = "fixed-partitions";
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <1>;
|
|
|
-
|
|
|
- uboot: partition@0 {
|
|
|
- reg = <0x0 0x90000>;
|
|
|
- label = "u-boot";
|
|
|
- read-only;
|
|
|
- };
|
|
|
-
|
|
|
- partition@90000 {
|
|
|
- reg = <0x90000 0x10000>;
|
|
|
- label = "u-boot-env";
|
|
|
- };
|
|
|
-
|
|
|
- partition@a0000 {
|
|
|
- reg = <0xa0000 0x20000>;
|
|
|
- label = "cfgxxx";
|
|
|
- read-only;
|
|
|
- };
|
|
|
-
|
|
|
- partition@c0000 {
|
|
|
- reg = <0xc0000 0x40000>;
|
|
|
- label = "device_id";
|
|
|
- read-only;
|
|
|
-
|
|
|
- nvmem-layout {
|
|
|
- compatible = "fixed-layout";
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <1>;
|
|
|
-
|
|
|
- macaddr_device_id_1830: mac-address@1830 {
|
|
|
- compatible = "mac-base";
|
|
|
- reg = <0x1830 0x11>;
|
|
|
- #nvmem-cell-cells = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- macaddr_device_id_1844: mac-address@1844 {
|
|
|
- compatible = "mac-base";
|
|
|
- reg = <0x1844 0x11>;
|
|
|
- #nvmem-cell-cells = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- macaddr_device_id_1858: mac-address@1858 {
|
|
|
- compatible = "mac-base";
|
|
|
- reg = <0x1858 0x11>;
|
|
|
- #nvmem-cell-cells = <1>;
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- gpio0: gpio-controller@fc00 {
|
|
|
- };
|
|
|
-
|
|
|
- usb@22000 {
|
|
|
- phy_type = "utmi";
|
|
|
- dr_mode = "host";
|
|
|
- };
|
|
|
-
|
|
|
- mdio@24000 {
|
|
|
- phy1: ethernet-phy@1 {
|
|
|
- reg = <0x1>;
|
|
|
- };
|
|
|
-
|
|
|
- phy2: ethernet-phy@2 {
|
|
|
- reg = <0x2>;
|
|
|
- };
|
|
|
-
|
|
|
- phy3: ethernet-phy@3 {
|
|
|
- reg = <0x3>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- mdio@25000 {
|
|
|
- tbi_phy1: tbi-phy@11 {
|
|
|
- reg = <0x11>;
|
|
|
- device_type = "tbi-phy";
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- mdio@26000 {
|
|
|
- tbi_phy2: tbi-phy@11 {
|
|
|
- reg = <0x11>;
|
|
|
- device_type = "tbi-phy";
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- enet0: ethernet@b0000 {
|
|
|
- phy-handle = <&phy1>;
|
|
|
- phy-connection-type = "rgmii-id";
|
|
|
-
|
|
|
- nvmem-cells = <&macaddr_device_id_1830 0>;
|
|
|
- nvmem-cell-names = "mac-address";
|
|
|
- };
|
|
|
-
|
|
|
- enet1: ethernet@b1000 {
|
|
|
- tbi-handle = <&tbi_phy1>;
|
|
|
- phy-handle = <&phy2>;
|
|
|
- phy-connection-type = "sgmii";
|
|
|
-
|
|
|
- nvmem-cells = <&macaddr_device_id_1844 0>;
|
|
|
- nvmem-cell-names = "mac-address";
|
|
|
- };
|
|
|
-
|
|
|
- enet2: ethernet@b2000 {
|
|
|
- tbi-handle = <&tbi_phy2>;
|
|
|
- phy-handle = <&phy3>;
|
|
|
- phy-connection-type = "sgmii";
|
|
|
-
|
|
|
- nvmem-cells = <&macaddr_device_id_1858 0>;
|
|
|
- nvmem-cell-names = "mac-address";
|
|
|
- };
|
|
|
-
|
|
|
- sdhc@2e000 {
|
|
|
- status = "disabled";
|
|
|
- };
|
|
|
-
|
|
|
- serial1: serial@4600 {
|
|
|
- status = "disabled";
|
|
|
- };
|
|
|
-
|
|
|
- can0: can@1c000 {
|
|
|
- status = "disabled";
|
|
|
- };
|
|
|
-
|
|
|
- can1: can@1d000 {
|
|
|
- status = "disabled";
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- pci0: pcie@ffe09000 {
|
|
|
- status = "disabled";
|
|
|
- };
|
|
|
-
|
|
|
- pci1: pcie@ffe0a000 {
|
|
|
- status = "disabled";
|
|
|
- };
|
|
|
-
|
|
|
ifc: ifc@ffe1e000 {
|
|
|
reg = <0x0 0xffe1e000 0 0x2000>;
|
|
|
|