apm821xx: WNDR4700: delete wndr4700 board file

Thanks to the PCIE OF enumeration patch, this is technically
no longer needed.

Signed-off-by: Christian Lamparter <[email protected]>

target/linux/apm821xx/config-5.4

@@ -334,7 +334,6 @@ CONFIG_VDSO32=y
 # CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
 # CONFIG_WARP is not set
 CONFIG_WATCHDOG_CORE=y
-# CONFIG_WNDR4700 is not set
 # CONFIG_XILINX_SYSACE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_XZ_DEC_BCJ=y

target/linux/apm821xx/dts/netgear-wndr4700.dts

@@ -15,7 +15,7 @@
 
 / {
 	model = "Netgear WNDR4700/WNDR4720 Series";
-	compatible = "netgear,wndr4700";
+	compatible = "netgear,wndr4700", "apm,bluestone";
 
 	aliases {
 		serial0 = &UART0;

target/linux/apm821xx/files/arch/powerpc/platforms/44x/wndr4700.c

@@ -1,80 +0,0 @@
-/*
- * Netgear Centria N900 WNDR4700/WNDR4720 platform support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; version 2 of the License.
- *
- * This implemention is based on the simple platform support for the
- * PowerPC 44x chips.
- */
-
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-#include <asm/udbg.h>
-#include <asm/uic.h>
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <asm/unaligned.h>
-
-static const struct of_device_id ppc44x_of_bus[] __initconst = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-static int __init ppc44x_device_probe(void)
-{
-	of_platform_bus_probe(NULL, ppc44x_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(wndr4700, ppc44x_device_probe);
-
-static char *board[] __initdata = {
-	"netgear,wndr4700",
-};
-
-static int __init ppc44x_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-	int i = 0;
-
-	pcie_bus_config = PCIE_BUS_PEER2PEER; /* force 128 Byte MPS */
-
-	for (i = 0; i < ARRAY_SIZE(board); i++) {
-		if (of_flat_dt_is_compatible(root, board[i])) {
-			pci_set_flags(PCI_REASSIGN_ALL_RSRC); /* PCI_PROBE_ONLY */
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-define_machine(wndr4700) {
-	.name = "WNDR4700 Platform",
-	.probe = ppc44x_probe,
-	.progress = udbg_progress,
-	.init_IRQ = uic_init_tree,
-	.get_irq = uic_get_irq,
-	.restart = ppc4xx_reset_system,
-	.calibrate_decr = generic_calibrate_decr,
-};
-
-static int __init wndr4700_ath9k_eeprom_load(void)
-{
-	return 0;
-}
-machine_device_initcall(wndr4700, wndr4700_ath9k_eeprom_load);

target/linux/apm821xx/nand/config-default

@@ -48,5 +48,4 @@ CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_TC654=y
 CONFIG_SWCONFIG=y
 CONFIG_SWCONFIG_LEDS=y
-CONFIG_WNDR4700=y
 

target/linux/apm821xx/patches-5.4/202-add-netgear-wndr4700-support.patch

@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Makefile
-+++ b/arch/powerpc/platforms/44x/Makefile
-@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
- obj-y	+= idle.o
- endif
- obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
-+obj-$(CONFIG_WNDR4700) += wndr4700.o
- obj-$(CONFIG_EBONY)	+= ebony.o
- obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
- obj-$(CONFIG_WARP)	+= warp.o
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -243,6 +243,19 @@ config ICON
- 	help
- 	  This option enables support for the AMCC PPC440SPe evaluation board.
- 
-+config WNDR4700
-+	bool "WNDR4700"
-+	depends on 44x
-+	default n
-+	select APM821xx
-+	select PCI_MSI
-+	select PPC4xx_MSI
-+	select PPC4xx_PCI_EXPRESS
-+	select IBM_EMAC_RGMII
-+	select 460EX
-+	help
-+	  This option enables support for the Netgear WNDR4700/WNDR4720 board.
-+
- config XILINX_VIRTEX440_GENERIC_BOARD
- 	bool "Generic Xilinx Virtex 5 FXT board support"
- 	depends on 44x