ipq807x: prpl haze & qnap 301w: use the standard eMMC sysupgrade code

Note that the old ad-hoc method did not explicitly align backup data
to 64 KiB boundaries.

Also note that the qnap 301w has a 'rootfs_data' partition in the eMMC
that is being ignored by fstools during boot, presumably due to a bug.
This is why the partition is also ignored in the sysupgrade code and
there is no definition of CI_DATAPART="rootfs_data".

Signed-off-by: Rodrigo Balerdi <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16505
Signed-off-by: Robert Marko <[email protected]>
(cherry picked from commit fe481c9c47d97ebde1bc3c959924f4f9227c6c16)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <[email protected]>

target/linux/qualcommax/image/ipq807x.mk

@@ -308,7 +308,7 @@ define Device/prpl_haze
 	DEVICE_DTS_CONFIG := config@hk09
 	SOC := ipq8072
 	DEVICE_PACKAGES := ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci \
-		mkf2fs f2fsck kmod-fs-f2fs kmod-leds-lp5562
+		kmod-fs-f2fs f2fs-tools kmod-leds-lp5562
 endef
 TARGET_DEVICES += prpl_haze
 
@@ -320,7 +320,7 @@ define Device/qnap_301w
 	DEVICE_DTS_CONFIG := config@hk01
 	KERNEL_SIZE := 16384k
 	SOC := ipq8072
-	DEVICE_PACKAGES := ipq-wifi-qnap_301w
+	DEVICE_PACKAGES := kmod-fs-f2fs f2fs-tools ipq-wifi-qnap_301w
 endef
 TARGET_DEVICES += qnap_301w
 

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

@@ -185,9 +185,9 @@ platform_do_upgrade() {
 		;;
 	prpl,haze|\
 	qnap,301w)
-		kernelname="0:HLOS"
-		rootfsname="rootfs"
-		mmc_do_upgrade "$1"
+		CI_KERNPART="0:HLOS"
+		CI_ROOTPART="rootfs"
+		emmc_do_upgrade "$1"
 		;;
 	tplink,eap660hd-v1)
 		tplink_do_upgrade "$1"
@@ -267,6 +267,8 @@ platform_do_upgrade() {
 
 platform_copy_config() {
 	case "$(board_name)" in
+	prpl,haze|\
+	qnap,301w|\
 	spectrum,sax1v1k|\
 	zyxel,nbg7815)
 		emmc_copy_config