ipq40xx: fix pcie msi IRQ trigger level

From: Niklas Cassel <[email protected]>
|The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level
|triggered interrupt.
|
|The msi_ctrl_int will be high for as long as any MSI status bit is set,
|thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the
|IRQ handler to keep getting called, as long as any MSI status bit is set.
|[...]
|Not having the correct IRQ type defined will cause us to lose interrupts,
|which in turn causes timeouts in the PCIe endpoint drivers.
|
|Signed-off-by: Niklas Cassel <[email protected]>
|Reviewed-by: Bjorn Andersson <[email protected]>

Signed-off-by: Christian Lamparter <[email protected]>

target/linux/ipq40xx/patches-4.14/087-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch

@@ -0,0 +1,32 @@
+From: Niklas Cassel <[email protected]>
+Subject: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type
+Date: Thu, 24 Jan 2019 14:00:47 +0100
+
+The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level
+triggered interrupt.
+
+The msi_ctrl_int will be high for as long as any MSI status bit is set,
+thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the
+IRQ handler to keep getting called, as long as any MSI status bit is set.
+
+A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has
+configured this IRQ incorrectly.
+
+Not having the correct IRQ type defined will cause us to lose interrupts,
+which in turn causes timeouts in the PCIe endpoint drivers.
+
+Signed-off-by: Niklas Cassel <[email protected]>
+Reviewed-by: Bjorn Andersson <[email protected]>
+---
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -400,7 +400,7 @@
+ 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
+ 				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+ 
+-			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
++			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ 			interrupt-names = "msi";
+ 			#interrupt-cells = <1>;
+ 			interrupt-map-mask = <0 0 0 0x7>;

target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch

@@ -0,0 +1,32 @@
+From: Niklas Cassel <[email protected]>
+Subject: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type
+Date: Thu, 24 Jan 2019 14:00:47 +0100
+
+The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level
+triggered interrupt.
+
+The msi_ctrl_int will be high for as long as any MSI status bit is set,
+thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the
+IRQ handler to keep getting called, as long as any MSI status bit is set.
+
+A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has
+configured this IRQ incorrectly.
+
+Not having the correct IRQ type defined will cause us to lose interrupts,
+which in turn causes timeouts in the PCIe endpoint drivers.
+
+Signed-off-by: Niklas Cassel <[email protected]>
+Reviewed-by: Bjorn Andersson <[email protected]>
+---
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -404,7 +404,7 @@
+ 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
+ 				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+ 
+-			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
++			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ 			interrupt-names = "msi";
+ 			#interrupt-cells = <1>;
+ 			interrupt-map-mask = <0 0 0 0x7>;