|
|
@@ -0,0 +1,381 @@
|
|
|
+This patch adds support for the Gateworks Avila Network Platform in
|
|
|
+a separate set of setup files to the IXDP425. This is necessary now
|
|
|
+that a driver for the Avila CF card slot is available. It also adds
|
|
|
+support for a minor variant on the Avila board known as the Loft,
|
|
|
+which has a different number of maximum PCI devices.
|
|
|
+
|
|
|
+Signed-off-by: Michael-Luke Jones <mlj28 <at> cam.ac.uk>
|
|
|
+
|
|
|
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/Kconfig
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/Kconfig
|
|
|
++++ linux-2.6.19/arch/arm/mach-ixp4xx/Kconfig
|
|
|
+@@ -17,7 +17,7 @@ config MACH_NSLU2
|
|
|
+ NSLU2 NAS device. For more information on this platform,
|
|
|
+ see http://www.nslu2-linux.org
|
|
|
+
|
|
|
+-config ARCH_AVILA
|
|
|
++config MACH_AVILA
|
|
|
+ bool "Avila"
|
|
|
+ select PCI
|
|
|
+ help
|
|
|
+@@ -25,6 +25,14 @@ config ARCH_AVILA
|
|
|
+ Avila Network Platform. For more information on this platform,
|
|
|
+ see <file:Documentation/arm/IXP4xx>.
|
|
|
+
|
|
|
++config MACH_LOFT
|
|
|
++ bool "Loft"
|
|
|
++ depends on MACH_AVILA
|
|
|
++ help
|
|
|
++ Say 'Y' here if you want your kernel to support the Giant
|
|
|
++ Shoulder Inc Loft board (a minor variation on the standard
|
|
|
++ Gateworks Avila Network Platform).
|
|
|
++
|
|
|
+ config ARCH_ADI_COYOTE
|
|
|
+ bool "Coyote"
|
|
|
+ select PCI
|
|
|
+@@ -86,7 +94,7 @@ config MACH_NAS100D
|
|
|
+ #
|
|
|
+ config ARCH_IXDP4XX
|
|
|
+ bool
|
|
|
+- depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
|
|
|
++ depends on ARCH_IXDP425 || MACH_IXDP465
|
|
|
+ default y
|
|
|
+
|
|
|
+ #
|
|
|
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/Makefile
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/Makefile
|
|
|
++++ linux-2.6.19/arch/arm/mach-ixp4xx/Makefile
|
|
|
+@@ -6,6 +6,7 @@ obj-pci-y :=
|
|
|
+ obj-pci-n :=
|
|
|
+
|
|
|
+ obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
|
|
|
++obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
|
|
|
+ obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
|
|
|
+ obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
|
|
|
+ obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
|
|
|
+@@ -15,6 +16,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10
|
|
|
+ obj-y += common.o
|
|
|
+
|
|
|
+ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
|
|
|
++obj-$(CONFIG_MACH_AVILA) += avila-setup.o
|
|
|
+ obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
|
|
|
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
|
|
|
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
|
|
|
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-pci.c
|
|
|
+===================================================================
|
|
|
+--- /dev/null
|
|
|
++++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-pci.c
|
|
|
+@@ -0,0 +1,78 @@
|
|
|
++/*
|
|
|
++ * arch/arm/mach-ixp4xx/avila-pci.c
|
|
|
++ *
|
|
|
++ * Gateworks Avila board-level PCI initialization
|
|
|
++ *
|
|
|
++ * Author: Michael-Luke Jones <[email protected]>
|
|
|
++ *
|
|
|
++ * Based on ixdp-pci.c
|
|
|
++ * Copyright (C) 2002 Intel Corporation.
|
|
|
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
|
|
|
++ *
|
|
|
++ * Maintainer: Deepak Saxena <[email protected]>
|
|
|
++ *
|
|
|
++ * This program is free software; you can redistribute it and/or modify
|
|
|
++ * it under the terms of the GNU General Public License version 2 as
|
|
|
++ * published by the Free Software Foundation.
|
|
|
++ *
|
|
|
++ */
|
|
|
++
|
|
|
++#include <linux/kernel.h>
|
|
|
++#include <linux/pci.h>
|
|
|
++#include <linux/init.h>
|
|
|
++#include <linux/irq.h>
|
|
|
++#include <linux/delay.h>
|
|
|
++
|
|
|
++#include <asm/mach/pci.h>
|
|
|
++#include <asm/irq.h>
|
|
|
++#include <asm/hardware.h>
|
|
|
++#include <asm/mach-types.h>
|
|
|
++
|
|
|
++void __init avila_pci_preinit(void)
|
|
|
++{
|
|
|
++ set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
|
|
|
++ set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
|
|
|
++ set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
|
|
|
++ set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
|
|
|
++
|
|
|
++ ixp4xx_pci_preinit();
|
|
|
++}
|
|
|
++
|
|
|
++static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
|
++{
|
|
|
++ static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
|
|
|
++ IRQ_AVILA_PCI_INTA,
|
|
|
++ IRQ_AVILA_PCI_INTB,
|
|
|
++ IRQ_AVILA_PCI_INTC,
|
|
|
++ IRQ_AVILA_PCI_INTD
|
|
|
++ };
|
|
|
++
|
|
|
++ int irq = -1;
|
|
|
++
|
|
|
++ if (slot >= 1 &&
|
|
|
++ slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
|
|
|
++ pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
|
|
|
++ irq = pci_irq_table[(slot + pin - 2) % 4];
|
|
|
++ }
|
|
|
++
|
|
|
++ return irq;
|
|
|
++}
|
|
|
++
|
|
|
++struct hw_pci avila_pci __initdata = {
|
|
|
++ .nr_controllers = 1,
|
|
|
++ .preinit = avila_pci_preinit,
|
|
|
++ .swizzle = pci_std_swizzle,
|
|
|
++ .setup = ixp4xx_setup,
|
|
|
++ .scan = ixp4xx_scan_bus,
|
|
|
++ .map_irq = avila_map_irq,
|
|
|
++};
|
|
|
++
|
|
|
++int __init avila_pci_init(void)
|
|
|
++{
|
|
|
++ if (machine_is_avila() || machine_is_loft())
|
|
|
++ pci_common_init(&avila_pci);
|
|
|
++ return 0;
|
|
|
++}
|
|
|
++
|
|
|
++subsys_initcall(avila_pci_init);
|
|
|
++
|
|
|
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
|
|
|
+===================================================================
|
|
|
+--- /dev/null
|
|
|
++++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c
|
|
|
+@@ -0,0 +1,152 @@
|
|
|
++/*
|
|
|
++ * arch/arm/mach-ixp4xx/avila-setup.c
|
|
|
++ *
|
|
|
++ * Gateworks Avila board-setup
|
|
|
++ *
|
|
|
++ * Author: Michael-Luke Jones <[email protected]>
|
|
|
++ *
|
|
|
++ * Based on ixdp-setup.c
|
|
|
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
|
|
++ *
|
|
|
++ * Author: Deepak Saxena <[email protected]>
|
|
|
++ */
|
|
|
++
|
|
|
++#include <linux/kernel.h>
|
|
|
++#include <linux/init.h>
|
|
|
++#include <linux/device.h>
|
|
|
++#include <linux/serial.h>
|
|
|
++#include <linux/tty.h>
|
|
|
++#include <linux/serial_8250.h>
|
|
|
++#include <linux/slab.h>
|
|
|
++
|
|
|
++#include <asm/types.h>
|
|
|
++#include <asm/setup.h>
|
|
|
++#include <asm/memory.h>
|
|
|
++#include <asm/hardware.h>
|
|
|
++#include <asm/mach-types.h>
|
|
|
++#include <asm/irq.h>
|
|
|
++#include <asm/mach/arch.h>
|
|
|
++#include <asm/mach/flash.h>
|
|
|
++
|
|
|
++static struct flash_platform_data avila_flash_data = {
|
|
|
++ .map_name = "cfi_probe",
|
|
|
++ .width = 2,
|
|
|
++};
|
|
|
++
|
|
|
++static struct resource avila_flash_resource = {
|
|
|
++ .flags = IORESOURCE_MEM,
|
|
|
++};
|
|
|
++
|
|
|
++static struct platform_device avila_flash = {
|
|
|
++ .name = "IXP4XX-Flash",
|
|
|
++ .id = 0,
|
|
|
++ .dev = {
|
|
|
++ .platform_data = &avila_flash_data,
|
|
|
++ },
|
|
|
++ .num_resources = 1,
|
|
|
++ .resource = &avila_flash_resource,
|
|
|
++};
|
|
|
++
|
|
|
++static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
|
|
|
++ .sda_pin = AVILA_SDA_PIN,
|
|
|
++ .scl_pin = AVILA_SCL_PIN,
|
|
|
++};
|
|
|
++
|
|
|
++static struct platform_device avila_i2c_controller = {
|
|
|
++ .name = "IXP4XX-I2C",
|
|
|
++ .id = 0,
|
|
|
++ .dev = {
|
|
|
++ .platform_data = &avila_i2c_gpio_pins,
|
|
|
++ },
|
|
|
++ .num_resources = 0
|
|
|
++};
|
|
|
++
|
|
|
++static struct resource avila_uart_resources[] = {
|
|
|
++ {
|
|
|
++ .start = IXP4XX_UART1_BASE_PHYS,
|
|
|
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
|
++ .flags = IORESOURCE_MEM
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .start = IXP4XX_UART2_BASE_PHYS,
|
|
|
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
|
++ .flags = IORESOURCE_MEM
|
|
|
++ }
|
|
|
++};
|
|
|
++
|
|
|
++static struct plat_serial8250_port avila_uart_data[] = {
|
|
|
++ {
|
|
|
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
|
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
|
|
++ .irq = IRQ_IXP4XX_UART1,
|
|
|
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
|
++ .iotype = UPIO_MEM,
|
|
|
++ .regshift = 2,
|
|
|
++ .uartclk = IXP4XX_UART_XTAL,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
|
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
|
++ .irq = IRQ_IXP4XX_UART2,
|
|
|
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
|
++ .iotype = UPIO_MEM,
|
|
|
++ .regshift = 2,
|
|
|
++ .uartclk = IXP4XX_UART_XTAL,
|
|
|
++ },
|
|
|
++ { },
|
|
|
++};
|
|
|
++
|
|
|
++static struct platform_device avila_uart = {
|
|
|
++ .name = "serial8250",
|
|
|
++ .id = PLAT8250_DEV_PLATFORM,
|
|
|
++ .dev.platform_data = avila_uart_data,
|
|
|
++ .num_resources = 2,
|
|
|
++ .resource = avila_uart_resources
|
|
|
++};
|
|
|
++
|
|
|
++static struct platform_device *avila_devices[] __initdata = {
|
|
|
++ &avila_i2c_controller,
|
|
|
++ &avila_flash,
|
|
|
++ &avila_uart
|
|
|
++};
|
|
|
++
|
|
|
++static void __init avila_init(void)
|
|
|
++{
|
|
|
++ ixp4xx_sys_init();
|
|
|
++
|
|
|
++ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
|
++ avila_flash_resource.end =
|
|
|
++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
|
|
++
|
|
|
++ platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
|
|
|
++}
|
|
|
++
|
|
|
++MACHINE_START(AVILA, "Gateworks Avila Network Platform")
|
|
|
++ /* Maintainer: Deepak Saxena <[email protected]> */
|
|
|
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
|
|
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
|
|
++ .map_io = ixp4xx_map_io,
|
|
|
++ .init_irq = ixp4xx_init_irq,
|
|
|
++ .timer = &ixp4xx_timer,
|
|
|
++ .boot_params = 0x0100,
|
|
|
++ .init_machine = avila_init,
|
|
|
++MACHINE_END
|
|
|
++
|
|
|
++ /*
|
|
|
++ * Loft is functionally equivalent to Avila except that it has a
|
|
|
++ * different number for the maximum PCI devices. The MACHINE
|
|
|
++ * structure below is identical to Avila except for the comment.
|
|
|
++ */
|
|
|
++#ifdef CONFIG_MACH_LOFT
|
|
|
++MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
|
|
|
++ /* Maintainer: Tom Billman <[email protected]> */
|
|
|
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
|
|
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
|
|
++ .map_io = ixp4xx_map_io,
|
|
|
++ .init_irq = ixp4xx_init_irq,
|
|
|
++ .timer = &ixp4xx_timer,
|
|
|
++ .boot_params = 0x0100,
|
|
|
++ .init_machine = avila_init,
|
|
|
++MACHINE_END
|
|
|
++#endif
|
|
|
++
|
|
|
+Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/avila.h
|
|
|
+===================================================================
|
|
|
+--- /dev/null
|
|
|
++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/avila.h
|
|
|
+@@ -0,0 +1,39 @@
|
|
|
++/*
|
|
|
++ * include/asm-arm/arch-ixp4xx/avila.h
|
|
|
++ *
|
|
|
++ * Gateworks Avila platform specific definitions
|
|
|
++ *
|
|
|
++ * Author: Michael-Luke Jones <[email protected]>
|
|
|
++ *
|
|
|
++ * Based on ixdp425.h
|
|
|
++ * Author: Deepak Saxena <[email protected]>
|
|
|
++ *
|
|
|
++ * Copyright 2004 (c) MontaVista, Software, Inc.
|
|
|
++ *
|
|
|
++ * This file is licensed under the terms of the GNU General Public
|
|
|
++ * License version 2. This program is licensed "as is" without any
|
|
|
++ * warranty of any kind, whether express or implied.
|
|
|
++ */
|
|
|
++
|
|
|
++#ifndef __ASM_ARCH_HARDWARE_H__
|
|
|
++#error "Do not include this directly, instead #include <asm/hardware.h>"
|
|
|
++#endif
|
|
|
++
|
|
|
++#define AVILA_SDA_PIN 7
|
|
|
++#define AVILA_SCL_PIN 6
|
|
|
++
|
|
|
++/*
|
|
|
++ * AVILA PCI IRQs
|
|
|
++ */
|
|
|
++#define AVILA_PCI_MAX_DEV 4
|
|
|
++#define LOFT_PCI_MAX_DEV 6
|
|
|
++#define AVILA_PCI_IRQ_LINES 4
|
|
|
++
|
|
|
++
|
|
|
++/* PCI controller GPIO to IRQ pin mappings */
|
|
|
++#define AVILA_PCI_INTA_PIN 11
|
|
|
++#define AVILA_PCI_INTB_PIN 10
|
|
|
++#define AVILA_PCI_INTC_PIN 9
|
|
|
++#define AVILA_PCI_INTD_PIN 8
|
|
|
++
|
|
|
++
|
|
|
+Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/hardware.h
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/hardware.h
|
|
|
++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/hardware.h
|
|
|
+@@ -42,6 +42,7 @@ extern unsigned int processor_id;
|
|
|
+
|
|
|
+ /* Platform specific details */
|
|
|
+ #include "ixdp425.h"
|
|
|
++#include "avila.h"
|
|
|
+ #include "coyote.h"
|
|
|
+ #include "prpmc1100.h"
|
|
|
+ #include "nslu2.h"
|
|
|
+Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/irqs.h
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/irqs.h
|
|
|
++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/irqs.h
|
|
|
+@@ -79,6 +79,15 @@
|
|
|
+ #define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
|
|
|
+
|
|
|
+ /*
|
|
|
++ * Gateworks Avila board IRQs
|
|
|
++ */
|
|
|
++#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
|
|
|
++#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
|
|
|
++#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
|
|
|
++#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
|
|
|
++
|
|
|
++
|
|
|
++/*
|
|
|
+ * PrPMC1100 Board IRQs
|
|
|
+ */
|
|
|
+ #define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11
|
Imre Kaloz