Reinstate rdc bootability and force it to use init=/etc/preinit, thus the remove the hackish SetInitramfs actions

SVN-Revision: 12136

package/kernel/modules/network.mk

@@ -558,6 +558,7 @@ define KernelPackage/r6040
   DEPENDS:=@TARGET_rdc
   KCONFIG:=CONFIG_R6040
   FILES:=$(LINUX_DIR)/drivers/net/r6040.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,99,r6040)
 endef
 
 define KernelPackage/r6040/description

target/linux/rdc/Makefile

@@ -20,16 +20,4 @@ define Target/Description
         (e.g. Airlink101 AR525W, Linksys WRT54R, Sitecom WL-153)
 endef
 
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-  define Kernel/SetInitramfs
-	echo "r6040 parent=wlan0" > $(TARGET_DIR)/etc/modules.d/99-r6040
-	$(RM) $(TARGET_DIR)/sbin/init
-	ln -s /etc/preinit $(TARGET_DIR)/sbin/init
-	sed -i 's,exec /sbin/init,exec /bin/busybox init,g' $(TARGET_DIR)/etc/preinit
-	sed -i 's,/sbin/init,/bin/busybox init,g' $(TARGET_DIR)/init
-	mv $(TARGET_DIR)/init $(TARGET_DIR)/linuxrc
-	sed -i 's,eth0,eth1,g' $(TARGET_DIR)/etc/config/network
-  endef
-endif
-
 $(eval $(call BuildTarget))

target/linux/rdc/base-files/etc/config/network

@@ -0,0 +1,19 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth1
+	option type	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	eth0
+	option proto	dhcp
+

target/linux/rdc/config-2.6.24

@@ -23,10 +23,12 @@ CONFIG_BITREVERSE=y
 CONFIG_BLK_DEV_IDE=m
 CONFIG_BLK_DEV_IDEDISK=m
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BOUNCE=y
 # CONFIG_BROADCOM_PHY is not set
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_CLOCKSOURCE_WATCHDOG=y
 # CONFIG_COMPAT_VDSO is not set
 # CONFIG_CPU5_WDT is not set
@@ -70,7 +72,6 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_HID=m
-# CONFIG_HIDRAW is not set
 CONFIG_HID_SUPPORT=y
 # CONFIG_HIGHMEM4G is not set
 # CONFIG_HIGHMEM64G is not set
@@ -107,6 +108,7 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_IDE_PROC_FS is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_INPUT=m
+# CONFIG_INPUT_GPIO_BUTTONS is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_YEALINK=m
 CONFIG_INSTRUMENTATION=y
@@ -121,7 +123,6 @@ CONFIG_KEXEC=y
 CONFIG_KTIME_SCALAR=y
 # CONFIG_KVM is not set
 CONFIG_LBD=y
-# CONFIG_LEDS_ALIX is not set
 CONFIG_LEDS_GPIO=y
 # CONFIG_LGUEST is not set
 CONFIG_LSF=y
@@ -216,7 +217,7 @@ CONFIG_MTD_RDC3210_SIZE=0x400000
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NOHIGHMEM=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_NR_QUICK=1
 # CONFIG_NSC_GPIO is not set
 CONFIG_NVRAM=y
@@ -224,14 +225,13 @@ CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PARAVIRT_GUEST is not set
 CONFIG_PATA_ARTOP=m
 # CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_NS87415 is not set
 # CONFIG_PC8736x_GPIO is not set
 # CONFIG_PC87413_WDT is not set
 CONFIG_PCCARD=m
 CONFIG_PCCARD_NONSTATIC=m
+CONFIG_PCI=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI=y
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_DOMAINS=y
@@ -257,19 +257,16 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_SC1200_WDT is not set
 # CONFIG_SC520_WDT is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCx200 is not set
 # CONFIG_SCx200_ACB is not set
 CONFIG_SEMAPHORE_SLEEPERS=y
-# CONFIG_SENSORS_FSCHMD is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SLABINFO=y
 # CONFIG_SMP is not set
 # CONFIG_SMSC37B787_WDT is not set
 # CONFIG_SMSC_PHY is not set
-# CONFIG_SND_CS5530 is not set
 CONFIG_SOFT_WATCHDOG=m
 # CONFIG_SONYPI is not set
 # CONFIG_SPARSEMEM_STATIC is not set
@@ -277,18 +274,17 @@ CONFIG_SOFT_WATCHDOG=m
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TELCLOCK is not set
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
 # CONFIG_TOSHIBA is not set
 CONFIG_UID16=y
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_USB=m
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
-# CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
 # CONFIG_USB_UHCI_HCD is not set
@@ -298,9 +294,7 @@ CONFIG_V4L_USB_DRIVERS=y
 # CONFIG_VIA_RHINE is not set
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 CONFIG_VIDEO_CPIA2=m
-# CONFIG_VIDEO_TCM825X is not set
 CONFIG_VIDEO_V4L1=y
-# CONFIG_VIDEO_VP27SMPX is not set
 CONFIG_VIRTUALIZATION=y
 # CONFIG_VM86 is not set
 # CONFIG_VMSPLIT_1G is not set

target/linux/rdc/files/drivers/net/r6040.c

@@ -243,7 +243,7 @@ struct r6040_private {
 };
 
 struct net_device *parent_dev;
-static char *parent;
+static char *parent = "wlan0";
 module_param(parent, charp, 0444);
 MODULE_PARM_DESC(parent, "Parent network device name to get the MAC address from");
 

target/linux/rdc/patches-2.6.24/005-cmdline_setup.patch

@@ -0,0 +1,10 @@
+--- linux-2.6.24.7/arch/x86/kernel/setup_32.c	2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/arch/x86/kernel/setup_32.c	2008-08-05 14:54:58.000000000 +0200
+@@ -609,6 +609,7 @@
+ 		print_memory_map("user");
+ 	}
+ 
++	strcat(boot_command_line, " init=/etc/preinit");
+ 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+ 	*cmdline_p = command_line;
+