sunxi: Nanopi R1S H5: enable LAN LED configuration

This enables the LEDs on the LAN interfaces.

Signed-off-by: Chukun Pan <[email protected]>

target/linux/sunxi/patches-5.10/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch

@@ -0,0 +1,30 @@
+From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <[email protected]>
+Date: Sun, 10 Oct 2021 21:50:17 +0800
+Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5
+
+This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
+NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration
+register to match the blink behavior of the other port on the device.
+
+Signed-off-by: Chukun Pan <[email protected]>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -112,6 +112,13 @@
+ 
+ &ehci1 {
+ 	status = "okay";
++
++	usb-eth@1 {
++		compatible = "realtek,rtl8153";
++		reg = <1>;
++
++		realtek,led-data = <0x78>;
++	};
+ };
+ 
+ &ehci2 {

target/linux/sunxi/patches-5.4/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch

@@ -0,0 +1,30 @@
+From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <[email protected]>
+Date: Sun, 10 Oct 2021 21:50:17 +0800
+Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5
+
+This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
+NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration
+register to match the blink behavior of the other port on the device.
+
+Signed-off-by: Chukun Pan <[email protected]>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -111,6 +111,13 @@
+ 
+ &ehci1 {
+ 	status = "okay";
++
++	usb-eth@1 {
++		compatible = "realtek,rtl8153";
++		reg = <1>;
++
++		realtek,led-data = <0x78>;
++	};
+ };
+ 
+ &ehci2 {