|
|
@@ -0,0 +1,373 @@
|
|
|
+THIS CODE IS DEPRECATED.
|
|
|
+
|
|
|
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
|
|
|
+
|
|
|
+--mb
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+---
|
|
|
+ drivers/spi/Kconfig | 9 +
|
|
|
+ drivers/spi/Makefile | 1
|
|
|
+ drivers/spi/spi_gpio_old.c | 251 +++++++++++++++++++++++++++++++++++++++
|
|
|
+ include/linux/spi/spi_gpio_old.h | 73 +++++++++++
|
|
|
+ 4 files changed, 334 insertions(+)
|
|
|
+
|
|
|
+--- /dev/null
|
|
|
++++ b/include/linux/spi/spi_gpio_old.h
|
|
|
+@@ -0,0 +1,73 @@
|
|
|
++/*
|
|
|
++ * spi_gpio interface to platform code
|
|
|
++ *
|
|
|
++ * Copyright (c) 2008 Piotr Skamruk
|
|
|
++ * Copyright (c) 2008 Michael Buesch
|
|
|
++ *
|
|
|
++ * This program is free software; you can redistribute it and/or modify
|
|
|
++ * it under the terms of the GNU General Public License version 2 as
|
|
|
++ * published by the Free Software Foundation.
|
|
|
++ */
|
|
|
++#ifndef _LINUX_SPI_SPI_GPIO
|
|
|
++#define _LINUX_SPI_SPI_GPIO
|
|
|
++
|
|
|
++#include <linux/types.h>
|
|
|
++#include <linux/spi/spi.h>
|
|
|
++
|
|
|
++
|
|
|
++/**
|
|
|
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
|
|
|
++ *
|
|
|
++ * This structure holds information about a GPIO-based SPI device.
|
|
|
++ *
|
|
|
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
|
|
|
++ *
|
|
|
++ * @pin_miso: The GPIO pin number of the MISO pin.
|
|
|
++ *
|
|
|
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
|
|
|
++ *
|
|
|
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
|
|
|
++ *
|
|
|
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
|
|
|
++ *
|
|
|
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
|
|
|
++ * Note that doing no delay is not standards compliant,
|
|
|
++ * but it might be needed to speed up transfers on some
|
|
|
++ * slow embedded machines.
|
|
|
++ *
|
|
|
++ * @boardinfo_setup: This callback is called after the
|
|
|
++ * SPI master device was registered, but before the
|
|
|
++ * device is registered.
|
|
|
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
|
|
|
++ */
|
|
|
++struct spi_gpio_platform_data {
|
|
|
++ unsigned int pin_clk;
|
|
|
++ unsigned int pin_miso;
|
|
|
++ unsigned int pin_mosi;
|
|
|
++ unsigned int pin_cs;
|
|
|
++ bool cs_activelow;
|
|
|
++ bool no_spi_delay;
|
|
|
++ int (*boardinfo_setup)(struct spi_board_info *bi,
|
|
|
++ struct spi_master *master,
|
|
|
++ void *data);
|
|
|
++ void *boardinfo_setup_data;
|
|
|
++};
|
|
|
++
|
|
|
++/**
|
|
|
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
|
|
|
++ *
|
|
|
++ * The name string that has to be used for platform_device_alloc
|
|
|
++ * when allocating a spi-gpio device.
|
|
|
++ */
|
|
|
++#define SPI_GPIO_PLATDEV_NAME "spi-gpio"
|
|
|
++
|
|
|
++/**
|
|
|
++ * spi_gpio_next_id - Get another platform device ID number.
|
|
|
++ *
|
|
|
++ * This returns the next platform device ID number that has to be used
|
|
|
++ * for platform_device_alloc. The ID is opaque and should not be used for
|
|
|
++ * anything else.
|
|
|
++ */
|
|
|
++int spi_gpio_next_id(void);
|
|
|
++
|
|
|
++#endif /* _LINUX_SPI_SPI_GPIO */
|
|
|
+--- /dev/null
|
|
|
++++ b/drivers/spi/spi_gpio_old.c
|
|
|
+@@ -0,0 +1,251 @@
|
|
|
++/*
|
|
|
++ * Bitbanging SPI bus driver using GPIO API
|
|
|
++ *
|
|
|
++ * Copyright (c) 2008 Piotr Skamruk
|
|
|
++ * Copyright (c) 2008 Michael Buesch
|
|
|
++ *
|
|
|
++ * based on spi_s3c2410_gpio.c
|
|
|
++ * Copyright (c) 2006 Ben Dooks
|
|
|
++ * Copyright (c) 2006 Simtec Electronics
|
|
|
++ * and on i2c-gpio.c
|
|
|
++ * Copyright (C) 2007 Atmel Corporation
|
|
|
++ *
|
|
|
++ * This program is free software; you can redistribute it and/or modify
|
|
|
++ * it under the terms of the GNU General Public License version 2 as
|
|
|
++ * published by the Free Software Foundation.
|
|
|
++ */
|
|
|
++
|
|
|
++#include <linux/kernel.h>
|
|
|
++#include <linux/init.h>
|
|
|
++#include <linux/delay.h>
|
|
|
++#include <linux/spinlock.h>
|
|
|
++#include <linux/workqueue.h>
|
|
|
++#include <linux/module.h>
|
|
|
++#include <linux/platform_device.h>
|
|
|
++#include <linux/spi/spi.h>
|
|
|
++#include <linux/spi/spi_bitbang.h>
|
|
|
++#include <linux/spi/spi_gpio_old.h>
|
|
|
++#include <linux/gpio.h>
|
|
|
++#include <asm/atomic.h>
|
|
|
++
|
|
|
++
|
|
|
++struct spi_gpio {
|
|
|
++ struct spi_bitbang bitbang;
|
|
|
++ struct spi_gpio_platform_data *info;
|
|
|
++ struct platform_device *pdev;
|
|
|
++ struct spi_board_info bi;
|
|
|
++};
|
|
|
++
|
|
|
++
|
|
|
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
|
|
|
++{
|
|
|
++ return dev->controller_data;
|
|
|
++}
|
|
|
++
|
|
|
++static inline void setsck(struct spi_device *dev, int val)
|
|
|
++{
|
|
|
++ struct spi_gpio *sp = spidev_to_sg(dev);
|
|
|
++ gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
|
|
|
++}
|
|
|
++
|
|
|
++static inline void setmosi(struct spi_device *dev, int val)
|
|
|
++{
|
|
|
++ struct spi_gpio *sp = spidev_to_sg(dev);
|
|
|
++ gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
|
|
|
++}
|
|
|
++
|
|
|
++static inline u32 getmiso(struct spi_device *dev)
|
|
|
++{
|
|
|
++ struct spi_gpio *sp = spidev_to_sg(dev);
|
|
|
++ return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
|
|
|
++}
|
|
|
++
|
|
|
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
|
|
|
++{
|
|
|
++ struct spi_gpio *sp = spidev_to_sg(dev);
|
|
|
++
|
|
|
++ if (!sp->info->no_spi_delay)
|
|
|
++ ndelay(nsecs);
|
|
|
++}
|
|
|
++
|
|
|
++#define spidelay(nsecs) do { \
|
|
|
++ /* Steal the spi_device pointer from our caller. \
|
|
|
++ * The bitbang-API should probably get fixed here... */ \
|
|
|
++ do_spidelay(spi, nsecs); \
|
|
|
++ } while (0)
|
|
|
++
|
|
|
++#define EXPAND_BITBANG_TXRX
|
|
|
++#include "spi-bitbang-txrx.h"
|
|
|
++
|
|
|
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
|
|
|
++ unsigned nsecs, u32 word, u8 bits)
|
|
|
++{
|
|
|
++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
|
|
|
++}
|
|
|
++
|
|
|
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
|
|
|
++ unsigned nsecs, u32 word, u8 bits)
|
|
|
++{
|
|
|
++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
|
|
|
++}
|
|
|
++
|
|
|
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
|
|
|
++ unsigned nsecs, u32 word, u8 bits)
|
|
|
++{
|
|
|
++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
|
|
|
++}
|
|
|
++
|
|
|
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
|
|
|
++ unsigned nsecs, u32 word, u8 bits)
|
|
|
++{
|
|
|
++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
|
|
|
++}
|
|
|
++
|
|
|
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
|
|
|
++{
|
|
|
++ struct spi_gpio *sp = spidev_to_sg(dev);
|
|
|
++
|
|
|
++ if (sp->info->cs_activelow)
|
|
|
++ on = !on;
|
|
|
++ gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
|
|
|
++}
|
|
|
++
|
|
|
++static int spi_gpio_probe(struct platform_device *pdev)
|
|
|
++{
|
|
|
++ struct spi_master *master;
|
|
|
++ struct spi_gpio_platform_data *pdata;
|
|
|
++ struct spi_gpio *sp;
|
|
|
++ struct spi_device *spidev;
|
|
|
++ int err;
|
|
|
++
|
|
|
++ pdata = pdev->dev.platform_data;
|
|
|
++ if (!pdata)
|
|
|
++ return -ENXIO;
|
|
|
++
|
|
|
++ err = -ENOMEM;
|
|
|
++ master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
|
|
|
++ if (!master)
|
|
|
++ goto err_alloc_master;
|
|
|
++
|
|
|
++ sp = spi_master_get_devdata(master);
|
|
|
++ platform_set_drvdata(pdev, sp);
|
|
|
++ sp->info = pdata;
|
|
|
++
|
|
|
++ err = gpio_request(pdata->pin_clk, "spi_clock");
|
|
|
++ if (err)
|
|
|
++ goto err_request_clk;
|
|
|
++ err = gpio_request(pdata->pin_mosi, "spi_mosi");
|
|
|
++ if (err)
|
|
|
++ goto err_request_mosi;
|
|
|
++ err = gpio_request(pdata->pin_miso, "spi_miso");
|
|
|
++ if (err)
|
|
|
++ goto err_request_miso;
|
|
|
++ err = gpio_request(pdata->pin_cs, "spi_cs");
|
|
|
++ if (err)
|
|
|
++ goto err_request_cs;
|
|
|
++
|
|
|
++ sp->bitbang.master = spi_master_get(master);
|
|
|
++ sp->bitbang.master->bus_num = -1;
|
|
|
++ sp->bitbang.master->num_chipselect = 1;
|
|
|
++ sp->bitbang.chipselect = spi_gpio_chipselect;
|
|
|
++ sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
|
|
|
++ sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
|
|
|
++ sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
|
|
|
++ sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
|
|
|
++
|
|
|
++ gpio_direction_output(pdata->pin_clk, 0);
|
|
|
++ gpio_direction_output(pdata->pin_mosi, 0);
|
|
|
++ gpio_direction_output(pdata->pin_cs,
|
|
|
++ pdata->cs_activelow ? 1 : 0);
|
|
|
++ gpio_direction_input(pdata->pin_miso);
|
|
|
++
|
|
|
++ err = spi_bitbang_start(&sp->bitbang);
|
|
|
++ if (err)
|
|
|
++ goto err_no_bitbang;
|
|
|
++ err = pdata->boardinfo_setup(&sp->bi, master,
|
|
|
++ pdata->boardinfo_setup_data);
|
|
|
++ if (err)
|
|
|
++ goto err_bi_setup;
|
|
|
++ sp->bi.controller_data = sp;
|
|
|
++ spidev = spi_new_device(master, &sp->bi);
|
|
|
++ if (!spidev)
|
|
|
++ goto err_new_dev;
|
|
|
++
|
|
|
++ return 0;
|
|
|
++
|
|
|
++err_new_dev:
|
|
|
++err_bi_setup:
|
|
|
++ spi_bitbang_stop(&sp->bitbang);
|
|
|
++err_no_bitbang:
|
|
|
++ spi_master_put(sp->bitbang.master);
|
|
|
++ gpio_free(pdata->pin_cs);
|
|
|
++err_request_cs:
|
|
|
++ gpio_free(pdata->pin_miso);
|
|
|
++err_request_miso:
|
|
|
++ gpio_free(pdata->pin_mosi);
|
|
|
++err_request_mosi:
|
|
|
++ gpio_free(pdata->pin_clk);
|
|
|
++err_request_clk:
|
|
|
++ kfree(master);
|
|
|
++
|
|
|
++err_alloc_master:
|
|
|
++ return err;
|
|
|
++}
|
|
|
++
|
|
|
++static int spi_gpio_remove(struct platform_device *pdev)
|
|
|
++{
|
|
|
++ struct spi_gpio *sp;
|
|
|
++ struct spi_gpio_platform_data *pdata;
|
|
|
++
|
|
|
++ pdata = pdev->dev.platform_data;
|
|
|
++ sp = platform_get_drvdata(pdev);
|
|
|
++
|
|
|
++ gpio_free(pdata->pin_clk);
|
|
|
++ gpio_free(pdata->pin_mosi);
|
|
|
++ gpio_free(pdata->pin_miso);
|
|
|
++ gpio_free(pdata->pin_cs);
|
|
|
++ spi_bitbang_stop(&sp->bitbang);
|
|
|
++ spi_master_put(sp->bitbang.master);
|
|
|
++
|
|
|
++ return 0;
|
|
|
++}
|
|
|
++
|
|
|
++static struct platform_driver spi_gpio_driver = {
|
|
|
++ .driver = {
|
|
|
++ .name = SPI_GPIO_PLATDEV_NAME,
|
|
|
++ .owner = THIS_MODULE,
|
|
|
++ },
|
|
|
++ .probe = spi_gpio_probe,
|
|
|
++ .remove = spi_gpio_remove,
|
|
|
++};
|
|
|
++
|
|
|
++int spi_gpio_next_id(void)
|
|
|
++{
|
|
|
++ static atomic_t counter = ATOMIC_INIT(-1);
|
|
|
++
|
|
|
++ return atomic_inc_return(&counter);
|
|
|
++}
|
|
|
++EXPORT_SYMBOL(spi_gpio_next_id);
|
|
|
++
|
|
|
++static int __init spi_gpio_init(void)
|
|
|
++{
|
|
|
++ int err;
|
|
|
++
|
|
|
++ err = platform_driver_register(&spi_gpio_driver);
|
|
|
++ if (err)
|
|
|
++ printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
|
|
|
++
|
|
|
++ return err;
|
|
|
++}
|
|
|
++module_init(spi_gpio_init);
|
|
|
++
|
|
|
++static void __exit spi_gpio_exit(void)
|
|
|
++{
|
|
|
++ platform_driver_unregister(&spi_gpio_driver);
|
|
|
++}
|
|
|
++module_exit(spi_gpio_exit);
|
|
|
++
|
|
|
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
|
|
|
++MODULE_AUTHOR("Michael Buesch");
|
|
|
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
|
|
|
++MODULE_LICENSE("GPL v2");
|
|
|
+--- a/drivers/spi/Kconfig
|
|
|
++++ b/drivers/spi/Kconfig
|
|
|
+@@ -225,6 +225,15 @@ config SPI_GPIO
|
|
|
+ GPIO operations, you should be able to leverage that for better
|
|
|
+ speed with a custom version of this driver; see the source code.
|
|
|
+
|
|
|
++config SPI_GPIO_OLD
|
|
|
++ tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
|
|
|
++ depends on SPI_MASTER && GPIOLIB
|
|
|
++ select SPI_BITBANG
|
|
|
++ help
|
|
|
++ This code is deprecated. Please use the new mainline SPI-GPIO driver.
|
|
|
++
|
|
|
++ If unsure, say N.
|
|
|
++
|
|
|
+ config SPI_IMX
|
|
|
+ tristate "Freescale i.MX SPI controllers"
|
|
|
+ depends on ARCH_MXC || COMPILE_TEST
|
|
|
+--- a/drivers/spi/Makefile
|
|
|
++++ b/drivers/spi/Makefile
|
|
|
+@@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-li
|
|
|
+ obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
|
|
|
+ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
|
|
|
+ obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
|
|
|
++obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
|
|
|
+ obj-$(CONFIG_SPI_IMX) += spi-imx.o
|
|
|
+ obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
|
|
|
+ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
|
Felix Fietkau