ssb: Fix serial console on new 47xx devices.

SVN-Revision: 10485

target/linux/brcm47xx/patches-2.6.23/220-bcm5354.patch

@@ -18,22 +18,6 @@
  	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
  	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
  	switch (*plltype) {
-@@ -387,7 +376,14 @@
- 						chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
- 		div = 1;
- 	} else {
--		if (cc->dev->id.revision >= 11) {
-+		if (cc->dev->id.revision == 20) {
-+			/* BCM5354 uses constant 25MHz clock */
-+			baud_base = 25000000;
-+			div = 48;
-+			/* Set the override bit so we don't divide it */
-+			chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+				       SSB_CHIPCO_CORECTL_UARTCLK0);
-+		} else if (cc->dev->id.revision >= 11) {
- 			/* Fixed ALP clock */
- 			baud_base = 20000000;
- 			div = 1;
 --- files/drivers/ssb/driver_mipscore.c	2007-10-24 16:57:38.000000000 -0700
 +++ linux-2.6.23.1/drivers/ssb/driver_mipscore.c	2007-10-27 13:29:36.000000000 -0700
 @@ -160,6 +160,8 @@

target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch

@@ -0,0 +1,90 @@
+Index: linux-2.6.23.16/drivers/ssb/driver_chipcommon.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/driver_chipcommon.c	2008-02-18 21:38:58.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/driver_chipcommon.c	2008-02-18 21:39:00.000000000 +0100
+@@ -365,6 +365,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+ 	unsigned int irq;
+ 	u32 baud_base, div;
+ 	u32 i, n;
++	unsigned int ccrev = cc->dev->id.revision;
+ 
+ 	plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ 	irq = ssb_mips_irq(cc->dev);
+@@ -376,14 +377,39 @@ int ssb_chipco_serial_init(struct ssb_ch
+ 						chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
+ 		div = 1;
+ 	} else {
+-		if (cc->dev->id.revision >= 11) {
++		if (ccrev == 20) {
++			/* BCM5354 uses constant 25MHz clock */
++			baud_base = 25000000;
++			div = 48;
++			/* Set the override bit so we don't divide it */
++			chipco_write32(cc, SSB_CHIPCO_CORECTL,
++				       chipco_read32(cc, SSB_CHIPCO_CORECTL)
++				       | SSB_CHIPCO_CORECTL_UARTCLK0);
++		} else if ((ccrev >= 11) && (ccrev != 15)) {
+ 			/* Fixed ALP clock */
+ 			baud_base = 20000000;
++			if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++				/* FIXME: baud_base is different for devices with a PMU */
++				SSB_WARN_ON(1);
++			}
+ 			div = 1;
++			if (ccrev >= 21) {
++				/* Turn off UART clock before switching clocksource. */
++				chipco_write32(cc, SSB_CHIPCO_CORECTL,
++					       chipco_read32(cc, SSB_CHIPCO_CORECTL)
++					       & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
++			}
+ 			/* Set the override bit so we don't divide it */
+ 			chipco_write32(cc, SSB_CHIPCO_CORECTL,
+-				       SSB_CHIPCO_CORECTL_UARTCLK0);
+-		} else if (cc->dev->id.revision >= 3) {
++				       chipco_read32(cc, SSB_CHIPCO_CORECTL)
++				       | SSB_CHIPCO_CORECTL_UARTCLK0);
++			if (ccrev >= 21) {
++				/* Re-enable the UART clock. */
++				chipco_write32(cc, SSB_CHIPCO_CORECTL,
++					       chipco_read32(cc, SSB_CHIPCO_CORECTL)
++					       | SSB_CHIPCO_CORECTL_UARTCLKEN);
++			}
++		} else if (ccrev >= 3) {
+ 			/* Internal backplane clock */
+ 			baud_base = ssb_clockspeed(bus);
+ 			div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
+@@ -395,7 +421,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+ 		}
+ 
+ 		/* Clock source depends on strapping if UartClkOverride is unset */
+-		if ((cc->dev->id.revision > 0) &&
++		if ((ccrev > 0) &&
+ 		    !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
+ 			if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
+ 			    SSB_CHIPCO_CAP_UARTCLK_INT) {
+@@ -417,7 +443,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+ 		cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
+ 		uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
+ 		/* Offset changed at after rev 0 */
+-		if (cc->dev->id.revision == 0)
++		if (ccrev == 0)
+ 			uart_regs += (i * 8);
+ 		else
+ 			uart_regs += (i * 256);
+Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_chipcommon.h	2008-02-18 21:38:58.000000000 +0100
++++ linux-2.6.23.16/include/linux/ssb/ssb_driver_chipcommon.h	2008-02-18 21:39:00.000000000 +0100
+@@ -51,9 +51,12 @@
+ #define  SSB_CHIPCO_CAP_JTAGM		0x00400000	/* JTAG master present */
+ #define  SSB_CHIPCO_CAP_BROM		0x00800000	/* Internal boot ROM active */
+ #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
++#define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
++#define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+ #define SSB_CHIPCO_CORECTL		0x0008
+ #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+ #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
++#define  SSB_CHIPCO_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+ #define SSB_CHIPCO_BIST			0x000C
+ #define SSB_CHIPCO_OTPS			0x0010		/* OTP status */
+ #define	 SSB_CHIPCO_OTPS_PROGFAIL	0x80000000