|
|
@@ -17,29 +17,16 @@ CONFIG_DRIVER_WIRED=y
|
|
|
|
|
|
# Driver interface for madwifi driver
|
|
|
CONFIG_DRIVER_MADWIFI=y
|
|
|
-#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src
|
|
|
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
|
|
|
|
|
|
# Driver interface for Prism54 driver
|
|
|
#CONFIG_DRIVER_PRISM54=y
|
|
|
|
|
|
# Driver interface for drivers using the nl80211 kernel interface
|
|
|
CONFIG_DRIVER_NL80211=y
|
|
|
-# driver_nl80211.c requires a rather new libnl, probably not
|
|
|
-# shipped with your distribution yet
|
|
|
-#LIBNL=/usr/src/libnl
|
|
|
-#CFLAGS += -I$(LIBNL)/include
|
|
|
-#LIBS += -L$(LIBNL)/lib
|
|
|
-
|
|
|
-# Driver interface for drivers using Devicescape IEEE 802.11 stack
|
|
|
-#CONFIG_DRIVER_DEVICESCAPE=y
|
|
|
-# Currently, driver_devicescape.c build requires some additional parameters
|
|
|
-# to be able to include some of the kernel header files. Following lines can
|
|
|
-# be used to set these (WIRELESS_DEV must point to the root directory of the
|
|
|
-# wireless-dev.git tree).
|
|
|
-#WIRELESS_DEV=/usr/src/wireless-dev
|
|
|
-#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
|
|
|
-# driver_devicescape.c requires a rather new libnl, probably not
|
|
|
-# shipped with your distribution yet
|
|
|
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
|
|
|
+# shipped with your distribution yet. If that is the case, you need to build
|
|
|
+# newer libnl version and point the hostapd build to use it.
|
|
|
#LIBNL=/usr/src/libnl
|
|
|
#CFLAGS += -I$(LIBNL)/include
|
|
|
#LIBS += -L$(LIBNL)/lib
|
|
|
@@ -49,6 +36,9 @@ CONFIG_DRIVER_NL80211=y
|
|
|
#CFLAGS += -I/usr/local/include
|
|
|
#LIBS += -L/usr/local/lib
|
|
|
|
|
|
+# Driver interface for no driver (e.g., RADIUS server only)
|
|
|
+#CONFIG_DRIVER_NONE=y
|
|
|
+
|
|
|
# IEEE 802.11F/IAPP
|
|
|
CONFIG_IAPP=y
|
|
|
|
|
|
@@ -91,6 +81,10 @@ CONFIG_EAP_TTLS=y
|
|
|
# EAP-AKA for the integrated EAP server
|
|
|
#CONFIG_EAP_AKA=y
|
|
|
|
|
|
+# EAP-AKA' for the integrated EAP server
|
|
|
+# This requires CONFIG_EAP_AKA to be enabled, too.
|
|
|
+#CONFIG_EAP_AKA_PRIME=y
|
|
|
+
|
|
|
# EAP-PAX for the integrated EAP server
|
|
|
#CONFIG_EAP_PAX=y
|
|
|
|
|
|
@@ -112,6 +106,17 @@ CONFIG_EAP_TTLS=y
|
|
|
# to add the needed functions.
|
|
|
#CONFIG_EAP_FAST=y
|
|
|
|
|
|
+# Wi-Fi Protected Setup (WPS)
|
|
|
+#CONFIG_WPS=y
|
|
|
+# Enable UPnP support for external WPS Registrars
|
|
|
+#CONFIG_WPS_UPNP=y
|
|
|
+
|
|
|
+# EAP-IKEv2
|
|
|
+#CONFIG_EAP_IKEV2=y
|
|
|
+
|
|
|
+# Trusted Network Connect (EAP-TNC)
|
|
|
+#CONFIG_EAP_TNC=y
|
|
|
+
|
|
|
# PKCS#12 (PFX) support (used to read private key and certificate file from
|
|
|
# a file that usually has extension .p12 or .pfx)
|
|
|
CONFIG_PKCS12=y
|
|
|
@@ -123,11 +128,17 @@ CONFIG_PKCS12=y
|
|
|
# Build IPv6 support for RADIUS operations
|
|
|
CONFIG_IPV6=y
|
|
|
|
|
|
-# IEEE 802.11r/D4.1 (Fast BSS Transition)
|
|
|
-# This enables an experimental implementation of a draft version of
|
|
|
-# IEEE 802.11r. This draft is still subject to change, so it should be noted
|
|
|
-# that this version may not comply with the final standard.
|
|
|
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
|
|
|
#CONFIG_IEEE80211R=y
|
|
|
|
|
|
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
|
|
|
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
|
|
|
+#CONFIG_DRIVER_RADIUS_ACL=y
|
|
|
+
|
|
|
# IEEE 802.11n (High Throughput) support
|
|
|
CONFIG_IEEE80211N=y
|
|
|
+
|
|
|
+# Remove debugging code that is printing out debug messages to stdout.
|
|
|
+# This can be used to reduce the size of the hostapd considerably if debugging
|
|
|
+# code is not needed.
|
|
|
+#CONFIG_NO_STDOUT_DEBUG=y
|
Hauke Mehrtens