ar71xx: add correct named default wireless led by using platform leds

Instead of renaming the default wireless led attached to the wireless
chip, add a new led using the platform leds with the phy0tpt trigger
set in userspace.

When switching ar71xx to device tree, the same can be done by using the
build in GPIO controller and without adding new bindings.

Drop the now unused platform code.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -788,7 +788,7 @@ wnr1000-v2|\
 wnr2000-v3)
 	ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
 	ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
-	ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
+	ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
 	ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
 	ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
 	ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
@@ -810,7 +810,7 @@ wnr2000-v4)
 wnr2200)
 	ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
 	ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
-	ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
+	ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
 	ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
 	ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
 	ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
@@ -823,7 +823,7 @@ wnr2200)
 	;;
 wnr612-v2)
 	ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
-	ucidef_set_led_netdev "wlan" "WLAN" "netgear:green:wlan" "wlan0"
+	ucidef_set_led_wlan "wlan" "WLAN" "netgear:green:wlan" "phy0tpt"
 	ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
 	ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
 	;;

target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c

@@ -39,18 +39,6 @@ __init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
 	}
 }
 
-__init void ap9x_pci_setup_wmac_led_name(unsigned wmac, const char *led_name)
-{
-	switch (wmac) {
-	case 0:
-		ap9x_wmac0_data.led_name = led_name;
-		break;
-	case 1:
-		ap9x_wmac1_data.led_name = led_name;
-		break;
-	}
-}
-
 __init struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
 {
 	switch (wmac) {

target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h

@@ -20,7 +20,6 @@ void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
 void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
 void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
 			      int num_leds);
-void ap9x_pci_setup_wmac_led_name(unsigned wmac, const char *led_name);
 void ap9x_pci_setup_wmac_btns(unsigned wmac, struct gpio_keys_button *btns,
 			      unsigned num_btns, unsigned poll_interval);
 struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac);
@@ -37,8 +36,6 @@ static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
 static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
 					    struct gpio_led *leds,
 					    int num_leds) {}
-static inline void ap9x_pci_setup_wmac_led_name(unsigned wmac,
-						const char *led_name) {}
 static inline void ap9x_pci_setup_wmac_btns(unsigned wmac,
 					    struct gpio_keys_button *btns,
 					    unsigned num_btns,

target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c

@@ -170,12 +170,13 @@ static struct gpio_led wnr2000v3_wmac_leds_gpio[] = {
 		.name		= "netgear:amber:test",
 		.gpio		= WNR2000V3_GPIO_WMAC_LED_TEST_AMBER,
 		.active_low	= 1,
+	}, {
+		.name		= "netgear:blue:wlan",
+		.gpio		= WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE,
+		.active_low	= 1,
 	}
 };
 
-/* Blue WLAN LED for: WNR2000v3, WNR1000v2, WPN824N */
-static const char *wnr2000v3_wmac_led_name = "netgear:blue:wlan";
-
 static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
 	{
 		.name		= "netgear:green:power",
@@ -196,7 +197,13 @@ static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
 	}
 };
 
-static const char *wnr612v2_wmac_led_name = "netgear:green:wlan";
+static struct gpio_led wnr612v2_wmac_leds_gpio[] __initdata = {
+	{
+		.name		= "netgear:green:wlan",
+		.gpio		= WNR612V2_GPIO_WMAC_LED_WLAN_GREEN,
+		.active_low	= 1,
+	}
+};
 
 static struct gpio_led wnr1000v2_leds_gpio[] __initdata = {
 	{
@@ -255,6 +262,10 @@ static struct gpio_led wnr1000v2_wmac_leds_gpio[] = {
 		.name		= "netgear:green:wps",
 		.gpio		= WNR1000V2_GPIO_WMAC_LED_WPS_GREEN,
 		.active_low	= 1,
+	}, {
+		.name		= "netgear:blue:wlan",
+		.gpio		= WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE,
+		.active_low	= 1,
 	}
 };
 
@@ -323,6 +334,10 @@ static struct gpio_led wpn824n_wmac_leds_gpio[] = {
 		.name		= "netgear:amber:test",
 		.gpio		= WPN824N_WGPIO_LED_TEST_AMBER,
 		.active_low	= 1,
+	}, {
+		.name		= "netgear:blue:wlan",
+		.gpio		= WPN824N_WGPIO_LED_WLAN_BLUE,
+		.active_low	= 1,
 	}
 };
 
@@ -504,9 +519,6 @@ static void __init wnr2000v3_setup(void)
 					ARRAY_SIZE(wnr2000v3_keys_gpio),
 					wnr2000v3_keys_gpio);
 
-	ap9x_pci_setup_wmac_led_pin(0, WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE);
-	ap9x_pci_setup_wmac_led_name(0, wnr2000v3_wmac_led_name);
-
 	ap9x_pci_setup_wmac_leds(0, wnr2000v3_wmac_leds_gpio,
 				 ARRAY_SIZE(wnr2000v3_wmac_leds_gpio));
 
@@ -548,14 +560,8 @@ static void __init wnr612v2_setup(void)
 	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr612v2_leds_gpio),
 				 wnr612v2_leds_gpio);
 
-	/*
-	 * This device has no buttons on AR7241 GPIO and no extra LEDs
-	 * connected to AR9285 so setup is simpler than for WNR2000v3.
-	 */
-	ap9x_pci_setup_wmac_led_pin(0, WNR612V2_GPIO_WMAC_LED_WLAN_GREEN);
-	ap9x_pci_setup_wmac_led_name(0, wnr612v2_wmac_led_name);
-
-	ap9x_pci_setup_wmac_leds(0, NULL, 0);
+	ap9x_pci_setup_wmac_leds(0, wnr612v2_wmac_leds_gpio,
+				 ARRAY_SIZE(wnr612v2_leds_gpio));
 
 	ap9x_pci_setup_wmac_btns(0, wnr612v2_wmac_keys_gpio,
 				 ARRAY_SIZE(wnr612v2_wmac_keys_gpio),
@@ -595,9 +601,6 @@ static void __init wnr1000v2_setup(void)
 	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr1000v2_leds_gpio),
 				 wnr1000v2_leds_gpio);
 
-	ap9x_pci_setup_wmac_led_pin(0, WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE);
-	ap9x_pci_setup_wmac_led_name(0, wnr2000v3_wmac_led_name);
-
 	ap9x_pci_setup_wmac_leds(0, wnr1000v2_wmac_leds_gpio,
 				 ARRAY_SIZE(wnr1000v2_wmac_leds_gpio));
 
@@ -624,8 +627,6 @@ static void __init wpn824n_setup(void)
 	ath79_register_leds_gpio(-1, ARRAY_SIZE(wpn824n_leds_gpio),
 				 wpn824n_leds_gpio);
 
-	ap9x_pci_setup_wmac_led_pin(0, WPN824N_WGPIO_LED_WLAN_BLUE);
-	ap9x_pci_setup_wmac_led_name(0, wnr2000v3_wmac_led_name);
 	ap9x_pci_setup_wmac_leds(0, wpn824n_wmac_leds_gpio,
 				 ARRAY_SIZE(wpn824n_wmac_leds_gpio));
 	ap9x_pci_setup_wmac_btns(0, wpn824n_wmac_keys_gpio,

target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c

@@ -109,8 +109,6 @@ static struct gpio_led wnr2200_leds_gpio[] __initdata = {
 	}
 };
 
-static const char *wnr2200_wmac_led_name = "netgear:blue:wlan";
-
 static struct gpio_led wnr2200_wmac_leds_gpio[] = {
 	{
 		.name		= "netgear:amber:test",
@@ -121,6 +119,10 @@ static struct gpio_led wnr2200_wmac_leds_gpio[] = {
 		.gpio		= WNR2200_GPIO_WMAC_LED_POWER_GREEN,
 		.active_low	= 1,
 		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}, {
+		.name		= "netgear:blue:wlan",
+		.gpio		= WNR2200_GPIO_WMAC_LED_WLAN_BLUE,
+		.active_low	= 1,
 	}
 };
 
@@ -225,9 +227,6 @@ static void __init wnr2200_setup(void)
 	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
 				 wnr2200_leds_gpio);
 
-	ap9x_pci_setup_wmac_led_pin(0, WNR2200_GPIO_WMAC_LED_WLAN_BLUE);
-	ap9x_pci_setup_wmac_led_name(0, wnr2200_wmac_led_name);
-
 	ap9x_pci_setup_wmac_leds(0, wnr2200_wmac_leds_gpio,
 				 ARRAY_SIZE(wnr2200_wmac_leds_gpio));