kernel: bump 5.15 to 5.15.156

No manual changes needed.

Signed-off-by: Hauke Mehrtens <[email protected]>

include/kernel-5.15

@@ -1,2 +1,2 @@
-LINUX_VERSION-5.15 = .155
-LINUX_KERNEL_HASH-5.15.155 = c85859b86d2e6d1fc91ca1be8b44f24a9b5bb9f86869b04a8665a3a6559126e4
+LINUX_VERSION-5.15 = .156
+LINUX_KERNEL_HASH-5.15.156 = 9f0465d14c93691056f5f94de647601f94f083ad8ce2e5d306564394b13e7778

target/linux/generic/backport-5.15/705-01-v5.17-net-dsa-mt7530-iterate-using-dsa_switch_for_each_use.patch

@@ -21,7 +21,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -1243,27 +1243,31 @@ static int
+@@ -1404,27 +1404,31 @@ static int
  mt7530_port_bridge_join(struct dsa_switch *ds, int port,
  			struct net_device *bridge)
  {
@@ -65,7 +65,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	}
  
  	/* Add the all other ports to this port matrix. */
-@@ -1368,24 +1372,28 @@ static void
+@@ -1529,24 +1533,28 @@ static void
  mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
  			 struct net_device *bridge)
  {

target/linux/generic/backport-5.15/705-02-v5.19-net-dsa-mt7530-populate-supported_interfaces-and-mac.patch

@@ -23,7 +23,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2499,6 +2499,32 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2660,6 +2660,32 @@ mt7531_setup(struct dsa_switch *ds)
  	return 0;
  }
  
@@ -56,7 +56,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static bool
  mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
  			  const struct phylink_link_state *state)
-@@ -2535,6 +2561,37 @@ static bool mt7531_is_rgmii_port(struct
+@@ -2696,6 +2722,37 @@ static bool mt7531_is_rgmii_port(struct
  	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
  }
  
@@ -94,7 +94,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static bool
  mt7531_phy_mode_supported(struct dsa_switch *ds, int port,
  			  const struct phylink_link_state *state)
-@@ -3011,6 +3068,18 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3172,6 +3229,18 @@ mt7531_cpu_port_config(struct dsa_switch
  	return 0;
  }
  
@@ -113,7 +113,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static void
  mt7530_mac_port_validate(struct dsa_switch *ds, int port,
  			 unsigned long *supported)
-@@ -3246,6 +3315,7 @@ static const struct dsa_switch_ops mt753
+@@ -3407,6 +3476,7 @@ static const struct dsa_switch_ops mt753
  	.port_vlan_del		= mt7530_port_vlan_del,
  	.port_mirror_add	= mt753x_port_mirror_add,
  	.port_mirror_del	= mt753x_port_mirror_del,
@@ -121,7 +121,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	.phylink_validate	= mt753x_phylink_validate,
  	.phylink_mac_link_state	= mt753x_phylink_mac_link_state,
  	.phylink_mac_config	= mt753x_phylink_mac_config,
-@@ -3263,6 +3333,7 @@ static const struct mt753x_info mt753x_t
+@@ -3424,6 +3494,7 @@ static const struct mt753x_info mt753x_t
  		.phy_read = mt7530_phy_read,
  		.phy_write = mt7530_phy_write,
  		.pad_setup = mt7530_pad_clk_setup,
@@ -129,7 +129,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.phy_mode_supported = mt7530_phy_mode_supported,
  		.mac_port_validate = mt7530_mac_port_validate,
  		.mac_port_get_state = mt7530_phylink_mac_link_state,
-@@ -3274,6 +3345,7 @@ static const struct mt753x_info mt753x_t
+@@ -3435,6 +3506,7 @@ static const struct mt753x_info mt753x_t
  		.phy_read = mt7530_phy_read,
  		.phy_write = mt7530_phy_write,
  		.pad_setup = mt7530_pad_clk_setup,
@@ -137,7 +137,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.phy_mode_supported = mt7530_phy_mode_supported,
  		.mac_port_validate = mt7530_mac_port_validate,
  		.mac_port_get_state = mt7530_phylink_mac_link_state,
-@@ -3286,6 +3358,7 @@ static const struct mt753x_info mt753x_t
+@@ -3447,6 +3519,7 @@ static const struct mt753x_info mt753x_t
  		.phy_write = mt7531_ind_phy_write,
  		.pad_setup = mt7531_pad_setup,
  		.cpu_port_config = mt7531_cpu_port_config,
@@ -145,7 +145,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.phy_mode_supported = mt7531_phy_mode_supported,
  		.mac_port_validate = mt7531_mac_port_validate,
  		.mac_port_get_state = mt7531_phylink_mac_link_state,
-@@ -3348,6 +3421,7 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3509,6 +3582,7 @@ mt7530_probe(struct mdio_device *mdiodev
  	 */
  	if (!priv->info->sw_setup || !priv->info->pad_setup ||
  	    !priv->info->phy_read || !priv->info->phy_write ||
@@ -155,7 +155,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	    !priv->info->mac_port_get_state || !priv->info->mac_port_config)
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -796,6 +796,8 @@ struct mt753x_info {
+@@ -801,6 +801,8 @@ struct mt753x_info {
  	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
  	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
  	int (*cpu_port_config)(struct dsa_switch *ds, int port);

target/linux/generic/backport-5.15/705-03-v5.19-net-dsa-mt7530-remove-interface-checks.patch

@@ -21,7 +21,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2525,37 +2525,6 @@ static void mt7530_mac_port_get_caps(str
+@@ -2686,37 +2686,6 @@ static void mt7530_mac_port_get_caps(str
  	}
  }
  
@@ -59,7 +59,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
  {
  	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
-@@ -2592,44 +2561,6 @@ static void mt7531_mac_port_get_caps(str
+@@ -2753,44 +2722,6 @@ static void mt7531_mac_port_get_caps(str
  	}
  }
  
@@ -104,7 +104,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static int
  mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
  {
-@@ -2884,9 +2815,6 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -3045,9 +2976,6 @@ mt753x_phylink_mac_config(struct dsa_swi
  	struct mt7530_priv *priv = ds->priv;
  	u32 mcr_cur, mcr_new;
  
@@ -114,7 +114,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	switch (port) {
  	case 0 ... 4: /* Internal phy */
  		if (state->interface != PHY_INTERFACE_MODE_GMII)
-@@ -3102,12 +3030,6 @@ mt753x_phylink_validate(struct dsa_switc
+@@ -3263,12 +3191,6 @@ mt753x_phylink_validate(struct dsa_switc
  	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
  	struct mt7530_priv *priv = ds->priv;
  
@@ -127,7 +127,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	phylink_set_port_modes(mask);
  
  	if (state->interface != PHY_INTERFACE_MODE_TRGMII &&
-@@ -3334,7 +3256,6 @@ static const struct mt753x_info mt753x_t
+@@ -3495,7 +3417,6 @@ static const struct mt753x_info mt753x_t
  		.phy_write = mt7530_phy_write,
  		.pad_setup = mt7530_pad_clk_setup,
  		.mac_port_get_caps = mt7530_mac_port_get_caps,
@@ -135,7 +135,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.mac_port_validate = mt7530_mac_port_validate,
  		.mac_port_get_state = mt7530_phylink_mac_link_state,
  		.mac_port_config = mt7530_mac_config,
-@@ -3346,7 +3267,6 @@ static const struct mt753x_info mt753x_t
+@@ -3507,7 +3428,6 @@ static const struct mt753x_info mt753x_t
  		.phy_write = mt7530_phy_write,
  		.pad_setup = mt7530_pad_clk_setup,
  		.mac_port_get_caps = mt7530_mac_port_get_caps,
@@ -143,7 +143,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.mac_port_validate = mt7530_mac_port_validate,
  		.mac_port_get_state = mt7530_phylink_mac_link_state,
  		.mac_port_config = mt7530_mac_config,
-@@ -3359,7 +3279,6 @@ static const struct mt753x_info mt753x_t
+@@ -3520,7 +3440,6 @@ static const struct mt753x_info mt753x_t
  		.pad_setup = mt7531_pad_setup,
  		.cpu_port_config = mt7531_cpu_port_config,
  		.mac_port_get_caps = mt7531_mac_port_get_caps,
@@ -151,7 +151,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.mac_port_validate = mt7531_mac_port_validate,
  		.mac_port_get_state = mt7531_phylink_mac_link_state,
  		.mac_port_config = mt7531_mac_config,
-@@ -3422,7 +3341,6 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3583,7 +3502,6 @@ mt7530_probe(struct mdio_device *mdiodev
  	if (!priv->info->sw_setup || !priv->info->pad_setup ||
  	    !priv->info->phy_read || !priv->info->phy_write ||
  	    !priv->info->mac_port_get_caps ||
@@ -161,7 +161,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		return -EINVAL;
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -798,8 +798,6 @@ struct mt753x_info {
+@@ -803,8 +803,6 @@ struct mt753x_info {
  	int (*cpu_port_config)(struct dsa_switch *ds, int port);
  	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
  				  struct phylink_config *config);

target/linux/generic/backport-5.15/705-04-v5.19-net-dsa-mt7530-drop-use-of-phylink_helper_basex_spee.patch

@@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3054,11 +3054,6 @@ mt753x_phylink_validate(struct dsa_switc
+@@ -3215,11 +3215,6 @@ mt753x_phylink_validate(struct dsa_switc
  
  	linkmode_and(supported, supported, mask);
  	linkmode_and(state->advertising, state->advertising, mask);

target/linux/generic/backport-5.15/705-05-v5.19-net-dsa-mt7530-only-indicate-linkmodes-that-can-be-s.patch

@@ -23,7 +23,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2632,12 +2632,13 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2793,12 +2793,13 @@ static int mt7531_rgmii_setup(struct mt7
  }
  
  static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
@@ -38,7 +38,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		phylink_set(supported, 2500baseX_Full);
  		phylink_set(supported, 2500baseT_Full);
  	}
-@@ -3010,16 +3011,18 @@ static void mt753x_phylink_get_caps(stru
+@@ -3171,16 +3172,18 @@ static void mt753x_phylink_get_caps(stru
  
  static void
  mt7530_mac_port_validate(struct dsa_switch *ds, int port,
@@ -58,7 +58,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  }
  
  static void
-@@ -3042,12 +3045,13 @@ mt753x_phylink_validate(struct dsa_switc
+@@ -3203,12 +3206,13 @@ mt753x_phylink_validate(struct dsa_switc
  	}
  
  	/* This switch only supports 1G full-duplex. */
@@ -76,7 +76,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	phylink_set(mask, Asym_Pause);
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -799,6 +799,7 @@ struct mt753x_info {
+@@ -804,6 +804,7 @@ struct mt753x_info {
  	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
  				  struct phylink_config *config);
  	void (*mac_port_validate)(struct dsa_switch *ds, int port,

target/linux/generic/backport-5.15/705-06-v5.19-net-dsa-mt7530-switch-to-use-phylink_get_linkmodes.patch

@@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2631,19 +2631,6 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2792,19 +2792,6 @@ static int mt7531_rgmii_setup(struct mt7
  	return 0;
  }
  
@@ -40,7 +40,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static void
  mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port,
  			   unsigned int mode, phy_interface_t interface,
-@@ -3010,51 +2997,21 @@ static void mt753x_phylink_get_caps(stru
+@@ -3171,51 +3158,21 @@ static void mt753x_phylink_get_caps(stru
  }
  
  static void
@@ -97,7 +97,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  
  	linkmode_and(supported, supported, mask);
  	linkmode_and(state->advertising, state->advertising, mask);
-@@ -3255,7 +3212,6 @@ static const struct mt753x_info mt753x_t
+@@ -3416,7 +3373,6 @@ static const struct mt753x_info mt753x_t
  		.phy_write = mt7530_phy_write,
  		.pad_setup = mt7530_pad_clk_setup,
  		.mac_port_get_caps = mt7530_mac_port_get_caps,
@@ -105,7 +105,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.mac_port_get_state = mt7530_phylink_mac_link_state,
  		.mac_port_config = mt7530_mac_config,
  	},
-@@ -3266,7 +3222,6 @@ static const struct mt753x_info mt753x_t
+@@ -3427,7 +3383,6 @@ static const struct mt753x_info mt753x_t
  		.phy_write = mt7530_phy_write,
  		.pad_setup = mt7530_pad_clk_setup,
  		.mac_port_get_caps = mt7530_mac_port_get_caps,
@@ -113,7 +113,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.mac_port_get_state = mt7530_phylink_mac_link_state,
  		.mac_port_config = mt7530_mac_config,
  	},
-@@ -3278,7 +3233,6 @@ static const struct mt753x_info mt753x_t
+@@ -3439,7 +3394,6 @@ static const struct mt753x_info mt753x_t
  		.pad_setup = mt7531_pad_setup,
  		.cpu_port_config = mt7531_cpu_port_config,
  		.mac_port_get_caps = mt7531_mac_port_get_caps,
@@ -121,7 +121,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.mac_port_get_state = mt7531_phylink_mac_link_state,
  		.mac_port_config = mt7531_mac_config,
  		.mac_pcs_an_restart = mt7531_sgmii_restart_an,
-@@ -3340,7 +3294,6 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3501,7 +3455,6 @@ mt7530_probe(struct mdio_device *mdiodev
  	if (!priv->info->sw_setup || !priv->info->pad_setup ||
  	    !priv->info->phy_read || !priv->info->phy_write ||
  	    !priv->info->mac_port_get_caps ||

target/linux/generic/backport-5.15/705-07-v5.19-net-dsa-mt7530-partially-convert-to-phylink_pcs.patch

@@ -33,7 +33,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  /* String, offset, and register size in bytes if different from 4 bytes */
  static const struct mt7530_mib_desc mt7530_mib[] = {
  	MIB_DESC(1, 0x00, "TxDrop"),
-@@ -2631,12 +2636,11 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2792,12 +2797,11 @@ static int mt7531_rgmii_setup(struct mt7
  	return 0;
  }
  
@@ -50,7 +50,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	unsigned int val;
  
  	/* For adjusting speed and duplex of SGMII force mode. */
-@@ -2662,6 +2666,9 @@ mt7531_sgmii_link_up_force(struct dsa_sw
+@@ -2823,6 +2827,9 @@ mt7531_sgmii_link_up_force(struct dsa_sw
  
  	/* MT7531 SGMII 1G force mode can only work in full duplex mode,
  	 * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
@@ -60,7 +60,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	 */
  	if ((speed == SPEED_10 || speed == SPEED_100) &&
  	    duplex != DUPLEX_FULL)
-@@ -2737,9 +2744,10 @@ static int mt7531_sgmii_setup_mode_an(st
+@@ -2898,9 +2905,10 @@ static int mt7531_sgmii_setup_mode_an(st
  	return 0;
  }
  
@@ -73,7 +73,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	u32 val;
  
  	/* Only restart AN when AN is enabled */
-@@ -2796,6 +2804,24 @@ mt753x_mac_config(struct dsa_switch *ds,
+@@ -2957,6 +2965,24 @@ mt753x_mac_config(struct dsa_switch *ds,
  	return priv->info->mac_port_config(ds, port, mode, state->interface);
  }
  
@@ -98,7 +98,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static void
  mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  			  const struct phylink_link_state *state)
-@@ -2857,17 +2883,6 @@ unsupported:
+@@ -3018,17 +3044,6 @@ unsupported:
  		mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
  }
  
@@ -116,7 +116,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
  					 unsigned int mode,
  					 phy_interface_t interface)
-@@ -2877,16 +2892,13 @@ static void mt753x_phylink_mac_link_down
+@@ -3038,16 +3053,13 @@ static void mt753x_phylink_mac_link_down
  	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
  }
  
@@ -139,7 +139,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  }
  
  static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
-@@ -2899,8 +2911,6 @@ static void mt753x_phylink_mac_link_up(s
+@@ -3060,8 +3072,6 @@ static void mt753x_phylink_mac_link_up(s
  	struct mt7530_priv *priv = ds->priv;
  	u32 mcr;
  
@@ -148,7 +148,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
  
  	/* MT753x MAC works in 1G full duplex mode for all up-clocked
-@@ -2978,6 +2988,8 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3139,6 +3149,8 @@ mt7531_cpu_port_config(struct dsa_switch
  		return ret;
  	mt7530_write(priv, MT7530_PMCR_P(port),
  		     PMCR_CPU_PORT_SETTING(priv->id));
@@ -157,7 +157,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
  				   speed, DUPLEX_FULL, true, true);
  
-@@ -3017,16 +3029,13 @@ mt753x_phylink_validate(struct dsa_switc
+@@ -3178,16 +3190,13 @@ mt753x_phylink_validate(struct dsa_switc
  	linkmode_and(state->advertising, state->advertising, mask);
  }
  
@@ -178,7 +178,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
  
  	state->link = (pmsr & PMSR_LINK);
-@@ -3053,8 +3062,6 @@ mt7530_phylink_mac_link_state(struct dsa
+@@ -3214,8 +3223,6 @@ mt7530_phylink_mac_link_state(struct dsa
  		state->pause |= MLO_PAUSE_RX;
  	if (pmsr & PMSR_TX_FC)
  		state->pause |= MLO_PAUSE_TX;
@@ -187,7 +187,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  }
  
  static int
-@@ -3096,32 +3103,49 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
+@@ -3257,32 +3264,49 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
  	return 0;
  }
  
@@ -249,7 +249,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  
  	if (ret)
  		return ret;
-@@ -3134,6 +3158,13 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3295,6 +3319,13 @@ mt753x_setup(struct dsa_switch *ds)
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);
  
@@ -263,7 +263,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	return ret;
  }
  
-@@ -3195,9 +3226,8 @@ static const struct dsa_switch_ops mt753
+@@ -3356,9 +3387,8 @@ static const struct dsa_switch_ops mt753
  	.port_mirror_del	= mt753x_port_mirror_del,
  	.phylink_get_caps	= mt753x_phylink_get_caps,
  	.phylink_validate	= mt753x_phylink_validate,
@@ -274,7 +274,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	.phylink_mac_link_down	= mt753x_phylink_mac_link_down,
  	.phylink_mac_link_up	= mt753x_phylink_mac_link_up,
  	.get_mac_eee		= mt753x_get_mac_eee,
-@@ -3207,36 +3237,34 @@ static const struct dsa_switch_ops mt753
+@@ -3368,36 +3398,34 @@ static const struct dsa_switch_ops mt753
  static const struct mt753x_info mt753x_table[] = {
  	[ID_MT7621] = {
  		.id = ID_MT7621,
@@ -314,7 +314,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	},
  };
  
-@@ -3294,7 +3322,7 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3455,7 +3483,7 @@ mt7530_probe(struct mdio_device *mdiodev
  	if (!priv->info->sw_setup || !priv->info->pad_setup ||
  	    !priv->info->phy_read || !priv->info->phy_write ||
  	    !priv->info->mac_port_get_caps ||
@@ -325,7 +325,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	priv->id = priv->info->id;
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -768,6 +768,12 @@ static const char *p5_intf_modes(unsigne
+@@ -773,6 +773,12 @@ static const char *p5_intf_modes(unsigne
  
  struct mt7530_priv;
  
@@ -338,7 +338,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  /* struct mt753x_info -	This is the main data structure for holding the specific
   *			part for each supported device
   * @sw_setup:		Holding the handler to a device initialization
-@@ -779,18 +785,14 @@ struct mt7530_priv;
+@@ -784,18 +790,14 @@ struct mt7530_priv;
   *			port
   * @mac_port_validate:	Holding the way to set addition validate type for a
   *			certan MAC port
@@ -359,7 +359,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	int (*sw_setup)(struct dsa_switch *ds);
  	int (*phy_read)(struct mt7530_priv *priv, int port, int regnum);
  	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
-@@ -801,15 +803,9 @@ struct mt753x_info {
+@@ -806,15 +808,9 @@ struct mt753x_info {
  	void (*mac_port_validate)(struct dsa_switch *ds, int port,
  				  phy_interface_t interface,
  				  unsigned long *supported);
@@ -375,7 +375,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  };
  
  /* struct mt7530_priv -	This is the main data structure for holding the state
-@@ -851,6 +847,7 @@ struct mt7530_priv {
+@@ -856,6 +852,7 @@ struct mt7530_priv {
  	u8			mirror_tx;
  
  	struct mt7530_port	ports[MT7530_NUM_PORTS];

target/linux/generic/backport-5.15/705-08-v5.19-net-dsa-mt7530-move-autoneg-handling-to-PCS-validati.patch

@@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3008,25 +3008,16 @@ static void mt753x_phylink_get_caps(stru
+@@ -3169,25 +3169,16 @@ static void mt753x_phylink_get_caps(stru
  	priv->info->mac_port_get_caps(ds, port, config);
  }
  
@@ -55,7 +55,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  }
  
  static void mt7530_pcs_get_state(struct phylink_pcs *pcs,
-@@ -3128,12 +3119,14 @@ static void mt7530_pcs_an_restart(struct
+@@ -3289,12 +3280,14 @@ static void mt7530_pcs_an_restart(struct
  }
  
  static const struct phylink_pcs_ops mt7530_pcs_ops = {
@@ -70,7 +70,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	.pcs_get_state = mt7531_pcs_get_state,
  	.pcs_config = mt753x_pcs_config,
  	.pcs_an_restart = mt7531_pcs_an_restart,
-@@ -3225,7 +3218,6 @@ static const struct dsa_switch_ops mt753
+@@ -3386,7 +3379,6 @@ static const struct dsa_switch_ops mt753
  	.port_mirror_add	= mt753x_port_mirror_add,
  	.port_mirror_del	= mt753x_port_mirror_del,
  	.phylink_get_caps	= mt753x_phylink_get_caps,

target/linux/generic/backport-5.15/705-09-v5.19-net-dsa-mt7530-mark-as-non-legacy.patch

@@ -19,7 +19,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3005,6 +3005,12 @@ static void mt753x_phylink_get_caps(stru
+@@ -3166,6 +3166,12 @@ static void mt753x_phylink_get_caps(stru
  	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
  				   MAC_10 | MAC_100 | MAC_1000FD;
  

target/linux/generic/backport-5.15/705-10-v5.19-net-dsa-mt753x-fix-pcs-conversion-regression.patch

@@ -81,7 +81,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3143,9 +3143,16 @@ static int
+@@ -3304,9 +3304,16 @@ static int
  mt753x_setup(struct dsa_switch *ds)
  {
  	struct mt7530_priv *priv = ds->priv;
@@ -100,7 +100,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	if (ret)
  		return ret;
  
-@@ -3157,13 +3164,6 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3318,13 +3325,6 @@ mt753x_setup(struct dsa_switch *ds)
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);
  

target/linux/generic/backport-5.15/705-11-v6.0-net-dsa-mt7530-rework-mt7530_hw_vlan_-add-del.patch

@@ -26,7 +26,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -1589,11 +1589,11 @@ static void
+@@ -1750,11 +1750,11 @@ static void
  mt7530_hw_vlan_add(struct mt7530_priv *priv,
  		   struct mt7530_hw_vlan_entry *entry)
  {
@@ -40,7 +40,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	/* Validate the entry with independent learning, create egress tag per
  	 * VLAN and joining the port as one of the port members.
-@@ -1604,22 +1604,20 @@ mt7530_hw_vlan_add(struct mt7530_priv *p
+@@ -1765,22 +1765,20 @@ mt7530_hw_vlan_add(struct mt7530_priv *p
  
  	/* Decide whether adding tag or not for those outgoing packets from the
  	 * port inside the VLAN.
@@ -72,7 +72,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  }
  
  static void
-@@ -1638,11 +1636,7 @@ mt7530_hw_vlan_del(struct mt7530_priv *p
+@@ -1799,11 +1797,7 @@ mt7530_hw_vlan_del(struct mt7530_priv *p
  		return;
  	}
  

target/linux/generic/backport-5.15/705-13-v6.0-net-dsa-mt7530-get-cpu-port-via-dp-cpu_dp-instead-of.patch

@@ -21,7 +21,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -1093,6 +1093,7 @@ static int
+@@ -1254,6 +1254,7 @@ static int
  mt7530_port_enable(struct dsa_switch *ds, int port,
  		   struct phy_device *phy)
  {
@@ -29,7 +29,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	struct mt7530_priv *priv = ds->priv;
  
  	mutex_lock(&priv->reg_mutex);
-@@ -1101,7 +1102,11 @@ mt7530_port_enable(struct dsa_switch *ds
+@@ -1262,7 +1263,11 @@ mt7530_port_enable(struct dsa_switch *ds
  	 * restore the port matrix if the port is the member of a certain
  	 * bridge.
  	 */
@@ -42,7 +42,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	priv->ports[port].enable = true;
  	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
  		   priv->ports[port].pm);
-@@ -1249,7 +1254,8 @@ mt7530_port_bridge_join(struct dsa_switc
+@@ -1410,7 +1415,8 @@ mt7530_port_bridge_join(struct dsa_switc
  			struct net_device *bridge)
  {
  	struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
@@ -52,7 +52,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	struct mt7530_priv *priv = ds->priv;
  
  	mutex_lock(&priv->reg_mutex);
-@@ -1326,9 +1332,12 @@ mt7530_port_set_vlan_unaware(struct dsa_
+@@ -1487,9 +1493,12 @@ mt7530_port_set_vlan_unaware(struct dsa_
  	 * the CPU port get out of VLAN filtering mode.
  	 */
  	if (all_user_ports_removed) {
@@ -67,7 +67,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  			     | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
  	}
  }
-@@ -1378,6 +1387,7 @@ mt7530_port_bridge_leave(struct dsa_swit
+@@ -1539,6 +1548,7 @@ mt7530_port_bridge_leave(struct dsa_swit
  			 struct net_device *bridge)
  {
  	struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
@@ -75,7 +75,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	struct mt7530_priv *priv = ds->priv;
  
  	mutex_lock(&priv->reg_mutex);
-@@ -1406,8 +1416,8 @@ mt7530_port_bridge_leave(struct dsa_swit
+@@ -1567,8 +1577,8 @@ mt7530_port_bridge_leave(struct dsa_swit
  	 */
  	if (priv->ports[port].enable)
  		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
@@ -86,7 +86,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	/* When a port is removed from the bridge, the port would be set up
  	 * back to the default as is at initial boot which is a VLAN-unaware
-@@ -1570,6 +1580,9 @@ static int
+@@ -1731,6 +1741,9 @@ static int
  mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
  			   struct netlink_ext_ack *extack)
  {
@@ -96,7 +96,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	if (vlan_filtering) {
  		/* The port is being kept as VLAN-unaware port when bridge is
  		 * set up with vlan_filtering not being set, Otherwise, the
-@@ -1577,7 +1590,7 @@ mt7530_port_vlan_filtering(struct dsa_sw
+@@ -1738,7 +1751,7 @@ mt7530_port_vlan_filtering(struct dsa_sw
  		 * for becoming a VLAN-aware port.
  		 */
  		mt7530_port_set_vlan_aware(ds, port);

target/linux/generic/backport-5.15/782-v6.1-net-dsa-mt7530-add-support-for-in-band-link-status.patch

@@ -19,7 +19,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2791,9 +2791,6 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2952,9 +2952,6 @@ mt7531_mac_config(struct dsa_switch *ds,
  	case PHY_INTERFACE_MODE_NA:
  	case PHY_INTERFACE_MODE_1000BASEX:
  	case PHY_INTERFACE_MODE_2500BASEX:
@@ -29,7 +29,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		return mt7531_sgmii_setup_mode_force(priv, port, interface);
  	default:
  		return -EINVAL;
-@@ -2869,13 +2866,6 @@ unsupported:
+@@ -3030,13 +3027,6 @@ unsupported:
  		return;
  	}
  
@@ -43,7 +43,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
  	mcr_new = mcr_cur;
  	mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
-@@ -3012,6 +3002,9 @@ static void mt753x_phylink_get_caps(stru
+@@ -3173,6 +3163,9 @@ static void mt753x_phylink_get_caps(stru
  	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
  				   MAC_10 | MAC_100 | MAC_1000FD;
  
@@ -53,7 +53,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	/* This driver does not make use of the speed, duplex, pause or the
  	 * advertisement in its mac_config, so it is safe to mark this driver
  	 * as non-legacy.
-@@ -3077,6 +3070,7 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
+@@ -3238,6 +3231,7 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
  
  	status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
  	state->link = !!(status & MT7531_SGMII_LINK_STATUS);
@@ -61,7 +61,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	if (state->interface == PHY_INTERFACE_MODE_SGMII &&
  	    (status & MT7531_SGMII_AN_ENABLE)) {
  		val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port));
-@@ -3107,16 +3101,44 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
+@@ -3268,16 +3262,44 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
  	return 0;
  }
  
@@ -109,7 +109,7 @@ Signed-off-by: David S. Miller <[email protected]>
  }
  
  static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-@@ -3157,6 +3179,8 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3318,6 +3340,8 @@ mt753x_setup(struct dsa_switch *ds)
  		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
  		priv->pcs[i].priv = priv;
  		priv->pcs[i].port = i;
@@ -120,7 +120,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	ret = priv->info->sw_setup(ds);
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -400,6 +400,7 @@ enum mt7530_vlan_port_acc_frm {
+@@ -405,6 +405,7 @@ enum mt7530_vlan_port_acc_frm {
  #define  MT7531_SGMII_LINK_STATUS	BIT(18)
  #define  MT7531_SGMII_AN_ENABLE		BIT(12)
  #define  MT7531_SGMII_AN_RESTART	BIT(9)

target/linux/generic/backport-5.15/788-v6.3-net-dsa-mt7530-use-external-PCS-driver.patch

@@ -81,7 +81,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  #include <linux/phylink.h>
  #include <linux/regmap.h>
  #include <linux/regulator/consumer.h>
-@@ -2643,128 +2644,11 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2804,128 +2805,11 @@ static int mt7531_rgmii_setup(struct mt7
  	return 0;
  }
  
@@ -210,7 +210,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  static int
  mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  		  phy_interface_t interface)
-@@ -2787,11 +2671,11 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2948,11 +2832,11 @@ mt7531_mac_config(struct dsa_switch *ds,
  		phydev = dp->slave->phydev;
  		return mt7531_rgmii_setup(priv, port, interface, phydev);
  	case PHY_INTERFACE_MODE_SGMII:
@@ -224,7 +224,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  	default:
  		return -EINVAL;
  	}
-@@ -2816,11 +2700,11 @@ mt753x_phylink_mac_select_pcs(struct dsa
+@@ -2977,11 +2861,11 @@ mt753x_phylink_mac_select_pcs(struct dsa
  
  	switch (interface) {
  	case PHY_INTERFACE_MODE_TRGMII:
@@ -238,7 +238,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  	default:
  		return NULL;
  	}
-@@ -3061,86 +2945,6 @@ static void mt7530_pcs_get_state(struct
+@@ -3222,86 +3106,6 @@ static void mt7530_pcs_get_state(struct
  		state->pause |= MLO_PAUSE_TX;
  }
  
@@ -325,7 +325,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
  			     phy_interface_t interface,
  			     const unsigned long *advertising,
-@@ -3160,18 +2964,57 @@ static const struct phylink_pcs_ops mt75
+@@ -3321,18 +3125,57 @@ static const struct phylink_pcs_ops mt75
  	.pcs_an_restart = mt7530_pcs_an_restart,
  };
  
@@ -389,7 +389,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  	int i, ret;
  
  	/* Initialise the PCS devices */
-@@ -3179,8 +3022,6 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3340,8 +3183,6 @@ mt753x_setup(struct dsa_switch *ds)
  		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
  		priv->pcs[i].priv = priv;
  		priv->pcs[i].port = i;
@@ -398,7 +398,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  	}
  
  	ret = priv->info->sw_setup(ds);
-@@ -3195,6 +3036,16 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3356,6 +3197,16 @@ mt753x_setup(struct dsa_switch *ds)
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);
  
@@ -415,7 +415,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  	return ret;
  }
  
-@@ -3286,7 +3137,7 @@ static const struct mt753x_info mt753x_t
+@@ -3447,7 +3298,7 @@ static const struct mt753x_info mt753x_t
  	},
  	[ID_MT7531] = {
  		.id = ID_MT7531,
@@ -424,7 +424,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  		.sw_setup = mt7531_setup,
  		.phy_read = mt7531_ind_phy_read,
  		.phy_write = mt7531_ind_phy_write,
-@@ -3394,7 +3245,7 @@ static void
+@@ -3555,7 +3406,7 @@ static void
  mt7530_remove(struct mdio_device *mdiodev)
  {
  	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
@@ -433,7 +433,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  
  	if (!priv)
  		return;
-@@ -3413,6 +3264,10 @@ mt7530_remove(struct mdio_device *mdiode
+@@ -3574,6 +3425,10 @@ mt7530_remove(struct mdio_device *mdiode
  		mt7530_free_irq(priv);
  
  	dsa_unregister_switch(priv->ds);
@@ -446,7 +446,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  	dev_set_drvdata(&mdiodev->dev, NULL);
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -391,47 +391,8 @@ enum mt7530_vlan_port_acc_frm {
+@@ -396,47 +396,8 @@ enum mt7530_vlan_port_acc_frm {
  					 CCR_TX_OCT_CNT_BAD)
  
  /* MT7531 SGMII register group */
@@ -496,7 +496,7 @@ Tested-by: Frank Wunderlich <[email protected]>
  
  /* Register for system reset */
  #define MT7530_SYS_CTRL			0x7000
-@@ -730,13 +691,13 @@ struct mt7530_fdb {
+@@ -735,13 +696,13 @@ struct mt7530_fdb {
   * @pm:		The matrix used to show all connections with the port.
   * @pvid:	The VLAN specified is to be considered a PVID at ingress.  Any
   *		untagged frames will be assigned to the related VLAN.

target/linux/generic/backport-5.15/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch

@@ -18,7 +18,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2996,26 +2996,56 @@ static const struct regmap_bus mt7531_re
+@@ -3157,26 +3157,56 @@ static const struct regmap_bus mt7531_re
  	.reg_update_bits = mt7530_regmap_update_bits,
  };
  
@@ -88,7 +88,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	int i, ret;
  
  	/* Initialise the PCS devices */
-@@ -3037,15 +3067,11 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3198,15 +3228,11 @@ mt753x_setup(struct dsa_switch *ds)
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);
  

target/linux/generic/backport-5.15/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch

@@ -19,7 +19,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2969,7 +2969,7 @@ static int mt7530_regmap_read(void *cont
+@@ -3130,7 +3130,7 @@ static int mt7530_regmap_read(void *cont
  {
  	struct mt7530_priv *priv = context;
  
@@ -28,7 +28,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	return 0;
  };
  
-@@ -2977,23 +2977,25 @@ static int mt7530_regmap_write(void *con
+@@ -3138,23 +3138,25 @@ static int mt7530_regmap_write(void *con
  {
  	struct mt7530_priv *priv = context;
  
@@ -62,7 +62,7 @@ Signed-off-by: David S. Miller <[email protected]>
  };
  
  static int
-@@ -3019,6 +3021,9 @@ mt7531_create_sgmii(struct mt7530_priv *
+@@ -3180,6 +3182,9 @@ mt7531_create_sgmii(struct mt7530_priv *
  		mt7531_pcs_config[i]->reg_stride = 4;
  		mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
  		mt7531_pcs_config[i]->max_register = 0x17c;

target/linux/generic/backport-5.15/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch

@@ -133,7 +133,7 @@ Signed-off-by: David S. Miller <[email protected]>
  }
  
  static void
-@@ -2965,22 +2986,6 @@ static const struct phylink_pcs_ops mt75
+@@ -3126,22 +3147,6 @@ static const struct phylink_pcs_ops mt75
  	.pcs_an_restart = mt7530_pcs_an_restart,
  };
  
@@ -156,7 +156,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void
  mt7530_mdio_regmap_lock(void *mdio_lock)
  {
-@@ -2993,7 +2998,7 @@ mt7530_mdio_regmap_unlock(void *mdio_loc
+@@ -3154,7 +3159,7 @@ mt7530_mdio_regmap_unlock(void *mdio_loc
  	mutex_unlock(mdio_lock);
  }
  
@@ -165,7 +165,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	.reg_write = mt7530_regmap_write,
  	.reg_read = mt7530_regmap_read,
  };
-@@ -3026,7 +3031,7 @@ mt7531_create_sgmii(struct mt7530_priv *
+@@ -3187,7 +3192,7 @@ mt7531_create_sgmii(struct mt7530_priv *
  		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
  
  		regmap = devm_regmap_init(priv->dev,
@@ -174,7 +174,7 @@ Signed-off-by: David S. Miller <[email protected]>
  					  mt7531_pcs_config[i]);
  		if (IS_ERR(regmap)) {
  			ret = PTR_ERR(regmap);
-@@ -3191,6 +3196,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match)
+@@ -3352,6 +3357,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match)
  static int
  mt7530_probe(struct mdio_device *mdiodev)
  {
@@ -182,7 +182,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	struct mt7530_priv *priv;
  	struct device_node *dn;
  
-@@ -3270,6 +3276,21 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3431,6 +3437,21 @@ mt7530_probe(struct mdio_device *mdiodev
  	mutex_init(&priv->reg_mutex);
  	dev_set_drvdata(&mdiodev->dev, priv);
  
@@ -206,7 +206,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -774,6 +774,7 @@ struct mt753x_info {
+@@ -779,6 +779,7 @@ struct mt753x_info {
   * @dev:		The device pointer
   * @ds:			The pointer to the dsa core structure
   * @bus:		The bus used for the device and built-in PHY
@@ -214,7 +214,7 @@ Signed-off-by: David S. Miller <[email protected]>
   * @rstc:		The pointer to reset control used by MCM
   * @core_pwr:		The power supplied into the core
   * @io_pwr:		The power supplied into the I/O
-@@ -794,6 +795,7 @@ struct mt7530_priv {
+@@ -799,6 +800,7 @@ struct mt7530_priv {
  	struct device		*dev;
  	struct dsa_switch	*ds;
  	struct mii_bus		*bus;

target/linux/generic/backport-5.15/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch

@@ -18,7 +18,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3077,12 +3077,6 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3238,12 +3238,6 @@ mt753x_setup(struct dsa_switch *ds)
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);
  
@@ -31,7 +31,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	return ret;
  }
  
-@@ -3199,6 +3193,7 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3360,6 +3354,7 @@ mt7530_probe(struct mdio_device *mdiodev
  	static struct regmap_config *regmap_config;
  	struct mt7530_priv *priv;
  	struct device_node *dn;
@@ -39,7 +39,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	dn = mdiodev->dev.of_node;
  
-@@ -3291,6 +3286,12 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3452,6 +3447,12 @@ mt7530_probe(struct mdio_device *mdiodev
  	if (IS_ERR(priv->regmap))
  		return PTR_ERR(priv->regmap);
  

target/linux/generic/backport-5.15/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch

@@ -214,7 +214,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	return ret;
  }
-@@ -1162,7 +1162,6 @@ static int
+@@ -1323,7 +1323,6 @@ static int
  mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
  {
  	struct mt7530_priv *priv = ds->priv;
@@ -222,7 +222,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	int length;
  	u32 val;
  
-@@ -1173,7 +1172,7 @@ mt7530_port_change_mtu(struct dsa_switch
+@@ -1334,7 +1333,7 @@ mt7530_port_change_mtu(struct dsa_switch
  	if (!dsa_is_cpu_port(ds, port))
  		return 0;
  
@@ -231,7 +231,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	val = mt7530_mii_read(priv, MT7530_GMACCR);
  	val &= ~MAX_RX_PKT_LEN_MASK;
-@@ -1194,7 +1193,7 @@ mt7530_port_change_mtu(struct dsa_switch
+@@ -1355,7 +1354,7 @@ mt7530_port_change_mtu(struct dsa_switch
  
  	mt7530_mii_write(priv, MT7530_GMACCR, val);
  
@@ -240,7 +240,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	return 0;
  }
-@@ -1990,10 +1989,10 @@ mt7530_irq_thread_fn(int irq, void *dev_
+@@ -2151,10 +2150,10 @@ mt7530_irq_thread_fn(int irq, void *dev_
  	u32 val;
  	int p;
  
@@ -253,7 +253,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	for (p = 0; p < MT7530_NUM_PHYS; p++) {
  		if (BIT(p) & val) {
-@@ -2029,7 +2028,7 @@ mt7530_irq_bus_lock(struct irq_data *d)
+@@ -2190,7 +2189,7 @@ mt7530_irq_bus_lock(struct irq_data *d)
  {
  	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
  
@@ -262,7 +262,7 @@ Signed-off-by: David S. Miller <[email protected]>
  }
  
  static void
-@@ -2038,7 +2037,7 @@ mt7530_irq_bus_sync_unlock(struct irq_da
+@@ -2199,7 +2198,7 @@ mt7530_irq_bus_sync_unlock(struct irq_da
  	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
  
  	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);

target/linux/generic/backport-5.15/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch

@@ -48,7 +48,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	struct mt7530_priv *priv = ds->priv;
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -709,24 +709,6 @@ enum p5_interface_select {
+@@ -714,24 +714,6 @@ enum p5_interface_select {
  	P5_INTF_SEL_GMAC5_SGMII,
  };
  

target/linux/generic/backport-5.15/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch

@@ -17,7 +17,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3205,44 +3205,21 @@ static const struct of_device_id mt7530_
+@@ -3366,44 +3366,21 @@ static const struct of_device_id mt7530_
  MODULE_DEVICE_TABLE(of, mt7530_of_match);
  
  static int
@@ -67,7 +67,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	if (!priv->info)
  		return -EINVAL;
  
-@@ -3256,23 +3233,53 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3417,23 +3394,53 @@ mt7530_probe(struct mdio_device *mdiodev
  		return -EINVAL;
  
  	priv->id = priv->info->id;
@@ -131,7 +131,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
  						      GPIOD_OUT_LOW);
  		if (IS_ERR(priv->reset)) {
-@@ -3281,12 +3288,15 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3442,12 +3449,15 @@ mt7530_probe(struct mdio_device *mdiodev
  		}
  	}
  

target/linux/generic/backport-5.15/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch

@@ -17,7 +17,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3323,6 +3323,17 @@ mt7530_probe(struct mdio_device *mdiodev
+@@ -3484,6 +3484,17 @@ mt7530_probe(struct mdio_device *mdiodev
  }
  
  static void
@@ -35,7 +35,7 @@ Signed-off-by: David S. Miller <[email protected]>
  mt7530_remove(struct mdio_device *mdiodev)
  {
  	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-@@ -3341,16 +3352,11 @@ mt7530_remove(struct mdio_device *mdiode
+@@ -3502,16 +3513,11 @@ mt7530_remove(struct mdio_device *mdiode
  		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
  			ret);
  

target/linux/generic/backport-5.15/790-v6.4-0011-net-dsa-mt7530-introduce-separate-MDIO-driver.patch

@@ -416,7 +416,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static u32
  mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
  {
-@@ -3003,72 +2954,6 @@ static const struct phylink_pcs_ops mt75
+@@ -3164,72 +3115,6 @@ static const struct phylink_pcs_ops mt75
  	.pcs_an_restart = mt7530_pcs_an_restart,
  };
  
@@ -489,7 +489,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static int
  mt753x_setup(struct dsa_switch *ds)
  {
-@@ -3127,7 +3012,7 @@ static int mt753x_set_mac_eee(struct dsa
+@@ -3288,7 +3173,7 @@ static int mt753x_set_mac_eee(struct dsa
  	return 0;
  }
  
@@ -498,7 +498,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	.get_tag_protocol	= mtk_get_tag_protocol,
  	.setup			= mt753x_setup,
  	.get_strings		= mt7530_get_strings,
-@@ -3161,8 +3046,9 @@ static const struct dsa_switch_ops mt753
+@@ -3322,8 +3207,9 @@ static const struct dsa_switch_ops mt753
  	.get_mac_eee		= mt753x_get_mac_eee,
  	.set_mac_eee		= mt753x_set_mac_eee,
  };
@@ -509,7 +509,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	[ID_MT7621] = {
  		.id = ID_MT7621,
  		.pcs_ops = &mt7530_pcs_ops,
-@@ -3195,16 +3081,9 @@ static const struct mt753x_info mt753x_t
+@@ -3356,16 +3242,9 @@ static const struct mt753x_info mt753x_t
  		.mac_port_config = mt7531_mac_config,
  	},
  };
@@ -528,7 +528,7 @@ Signed-off-by: David S. Miller <[email protected]>
  mt7530_probe_common(struct mt7530_priv *priv)
  {
  	struct device *dev = priv->dev;
-@@ -3241,88 +3120,9 @@ mt7530_probe_common(struct mt7530_priv *
+@@ -3402,88 +3281,9 @@ mt7530_probe_common(struct mt7530_priv *
  
  	return 0;
  }
@@ -619,7 +619,7 @@ Signed-off-by: David S. Miller <[email protected]>
  mt7530_remove_common(struct mt7530_priv *priv)
  {
  	if (priv->irq)
-@@ -3333,57 +3133,6 @@ mt7530_remove_common(struct mt7530_priv
+@@ -3494,57 +3294,6 @@ mt7530_remove_common(struct mt7530_priv
  	mutex_destroy(&priv->reg_mutex);
  }
  
@@ -679,7 +679,7 @@ Signed-off-by: David S. Miller <[email protected]>
  MODULE_LICENSE("GPL");
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -834,4 +834,10 @@ static inline void INIT_MT7530_DUMMY_POL
+@@ -839,4 +839,10 @@ static inline void INIT_MT7530_DUMMY_POL
  	p->reg = reg;
  }
  

target/linux/generic/backport-5.15/790-v6.4-0013-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch

@@ -184,7 +184,7 @@ Signed-off-by: David S. Miller <[email protected]>
 +MODULE_LICENSE("GPL");
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2037,6 +2037,47 @@ static const struct irq_domain_ops mt753
+@@ -2198,6 +2198,47 @@ static const struct irq_domain_ops mt753
  };
  
  static void
@@ -232,7 +232,7 @@ Signed-off-by: David S. Miller <[email protected]>
  mt7530_setup_mdio_irq(struct mt7530_priv *priv)
  {
  	struct dsa_switch *ds = priv->ds;
-@@ -2070,8 +2111,15 @@ mt7530_setup_irq(struct mt7530_priv *pri
+@@ -2231,8 +2272,15 @@ mt7530_setup_irq(struct mt7530_priv *pri
  		return priv->irq ? : -EINVAL;
  	}
  
@@ -250,7 +250,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	if (!priv->irq_domain) {
  		dev_err(dev, "failed to create IRQ domain\n");
  		return -ENOMEM;
-@@ -2566,6 +2614,25 @@ static void mt7531_mac_port_get_caps(str
+@@ -2727,6 +2775,25 @@ static void mt7531_mac_port_get_caps(str
  	}
  }
  
@@ -276,7 +276,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static int
  mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
  {
-@@ -2642,6 +2709,17 @@ static bool mt753x_is_mac_port(u32 port)
+@@ -2803,6 +2870,17 @@ static bool mt753x_is_mac_port(u32 port)
  }
  
  static int
@@ -294,7 +294,7 @@ Signed-off-by: David S. Miller <[email protected]>
  mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  		  phy_interface_t interface)
  {
-@@ -2711,7 +2789,8 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2872,7 +2950,8 @@ mt753x_phylink_mac_config(struct dsa_swi
  
  	switch (port) {
  	case 0 ... 4: /* Internal phy */
@@ -304,7 +304,7 @@ Signed-off-by: David S. Miller <[email protected]>
  			goto unsupported;
  		break;
  	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-@@ -2789,7 +2868,8 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2950,7 +3029,8 @@ static void mt753x_phylink_mac_link_up(s
  	/* MT753x MAC works in 1G full duplex mode for all up-clocked
  	 * variants.
  	 */
@@ -314,7 +314,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	    (phy_interface_mode_is_8023z(interface))) {
  		speed = SPEED_1000;
  		duplex = DUPLEX_FULL;
-@@ -2869,6 +2949,21 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3030,6 +3110,21 @@ mt7531_cpu_port_config(struct dsa_switch
  	return 0;
  }
  
@@ -336,7 +336,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
  				    struct phylink_config *config)
  {
-@@ -3014,6 +3109,27 @@ static int mt753x_set_mac_eee(struct dsa
+@@ -3175,6 +3270,27 @@ static int mt753x_set_mac_eee(struct dsa
  	return 0;
  }
  
@@ -364,7 +364,7 @@ Signed-off-by: David S. Miller <[email protected]>
  const struct dsa_switch_ops mt7530_switch_ops = {
  	.get_tag_protocol	= mtk_get_tag_protocol,
  	.setup			= mt753x_setup,
-@@ -3082,6 +3198,17 @@ const struct mt753x_info mt753x_table[]
+@@ -3243,6 +3359,17 @@ const struct mt753x_info mt753x_table[]
  		.mac_port_get_caps = mt7531_mac_port_get_caps,
  		.mac_port_config = mt7531_mac_config,
  	},
@@ -407,7 +407,7 @@ Signed-off-by: David S. Miller <[email protected]>
  					 MT7531_MIRROR_MASK : MIRROR_MASK)
  
  /* Registers for BPDU and PAE frame control*/
-@@ -322,9 +323,8 @@ enum mt7530_vlan_port_acc_frm {
+@@ -327,9 +328,8 @@ enum mt7530_vlan_port_acc_frm {
  					 MT7531_FORCE_DPX | \
  					 MT7531_FORCE_RX_FC | \
  					 MT7531_FORCE_TX_FC)

target/linux/generic/backport-5.15/790-v6.4-0014-net-dsa-mt7530-fix-support-for-MT7531BE.patch

@@ -73,7 +73,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  }
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3076,6 +3076,12 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3237,6 +3237,12 @@ mt753x_setup(struct dsa_switch *ds)
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);
  
@@ -88,7 +88,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -768,10 +768,10 @@ struct mt753x_info {
+@@ -773,10 +773,10 @@ struct mt753x_info {
   *			registers
   * @p6_interface	Holding the current port 6 interface
   * @p5_intf_sel:	Holding the current port 5 interface select
@@ -100,7 +100,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
   */
  struct mt7530_priv {
  	struct device		*dev;
-@@ -790,7 +790,6 @@ struct mt7530_priv {
+@@ -795,7 +795,6 @@ struct mt7530_priv {
  	unsigned int		p5_intf_sel;
  	u8			mirror_rx;
  	u8			mirror_tx;
@@ -108,7 +108,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	struct mt7530_port	ports[MT7530_NUM_PORTS];
  	struct mt753x_pcs	pcs[MT7530_NUM_PORTS];
  	/* protect among processes for registers access*/
-@@ -798,6 +797,7 @@ struct mt7530_priv {
+@@ -803,6 +802,7 @@ struct mt7530_priv {
  	int irq;
  	struct irq_domain *irq_domain;
  	u32 irq_enable;

target/linux/generic/pending-5.15/610-netfilter_match_bypass_default_checks.patch

@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  		for (i = sizeof(struct ipt_entry);
  		     i < e->target_offset;
  		     i += m->u.match_size) {
-@@ -1224,12 +1261,15 @@ compat_copy_entry_to_user(struct ipt_ent
+@@ -1226,12 +1263,15 @@ compat_copy_entry_to_user(struct ipt_ent
  	compat_uint_t origsize;
  	const struct xt_entry_match *ematch;
  	int ret = 0;

target/linux/generic/pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch

@@ -15,7 +15,7 @@ Signed-off-by: Alexander Couzens <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2467,7 +2467,7 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2628,7 +2628,7 @@ mt7531_setup(struct dsa_switch *ds)
  	struct mt7530_priv *priv = ds->priv;
  	struct mt7530_dummy_poll p;
  	u32 val, id;
@@ -24,7 +24,7 @@ Signed-off-by: Alexander Couzens <[email protected]>
  
  	/* Reset whole chip through gpio pin or memory-mapped registers for
  	 * different type of hardware
-@@ -2499,6 +2499,10 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2660,6 +2660,10 @@ mt7531_setup(struct dsa_switch *ds)
  		return -ENODEV;
  	}
  

target/linux/generic/pending-5.15/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch

@@ -16,7 +16,7 @@ Signed-off-by: David Bauer <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2174,10 +2174,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr
+@@ -2335,10 +2335,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr
  {
  	struct dsa_switch *ds = priv->ds;
  	struct device *dev = priv->dev;
@@ -30,7 +30,7 @@ Signed-off-by: David Bauer <[email protected]>
  	bus = devm_mdiobus_alloc(dev);
  	if (!bus)
  		return -ENOMEM;
-@@ -2194,7 +2197,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr
+@@ -2355,7 +2358,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr
  	if (priv->irq)
  		mt7530_setup_mdio_irq(priv);
  

target/linux/generic/pending-5.15/796-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch

@@ -33,7 +33,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2877,8 +2877,7 @@ static void mt753x_phylink_mac_link_up(s
+@@ -3038,8 +3038,7 @@ static void mt753x_phylink_mac_link_up(s
  	/* MT753x MAC works in 1G full duplex mode for all up-clocked
  	 * variants.
  	 */