ath79: add support for the TP-LINK WBS510 V1

This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <[email protected]>

target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts

@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpexxx-v1.dtsi"
+
+/ {
+	compatible = "tplink,wbs510-v1", "qca,ar9344";
+	model = "TP-Link WBS510 v1";
+};
+
+&led_link4 {
+	gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};

target/linux/ath79/generic/base-files/etc/board.d/01_leds

@@ -176,6 +176,7 @@ tplink,cpe220-v2|\
 tplink,cpe220-v3|\
 tplink,cpe510-v1|\
 tplink,wbs210-v2|\
+tplink,wbs510-v1|\
 tplink,wbs510-v2)
 	ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
 	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"

target/linux/ath79/generic/base-files/etc/board.d/02_network

@@ -92,6 +92,7 @@ ath79_setup_interfaces()
 	tplink,cpe220-v3|\
 	tplink,cpe510-v1|\
 	tplink,wbs210-v2|\
+	tplink,wbs510-v1|\
 	tplink,wbs510-v2|\
 	ubnt,nanostation-m|\
 	ubnt,routerstation)

target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches

@@ -47,6 +47,7 @@ tplink,cpe220-v2|\
 tplink,cpe220-v3|\
 tplink,cpe510-v1|\
 tplink,wbs210-v2|\
+tplink,wbs510-v1|\
 tplink,wbs510-v2)
 	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
 	;;

target/linux/ath79/image/generic-tp-link.mk

@@ -549,6 +549,18 @@ define Device/tplink_wbs210-v2
 endef
 TARGET_DEVICES += tplink_wbs210-v2
 
+define Device/tplink_wbs510-v1
+  $(Device/tplink-loader-okli)
+  ATH_SOC := ar9344
+  IMAGE_SIZE := 7680k
+  DEVICE_MODEL := WBS510
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := rssileds
+  TPLINK_BOARD_ID := WBS510
+  SUPPORTED_DEVICES += wbs510
+endef
+TARGET_DEVICES += tplink_wbs510-v1
+
 define Device/tplink_wbs510-v2
   $(Device/tplink-loader-okli)
   ATH_SOC := ar9344

tools/firmware-utils/src/tplink-safeloader.c

@@ -545,7 +545,8 @@ static struct device_info boards[] = {
 			"SupportList:\r\n"
 			"WBS510(TP-LINK|UN|N300-5):1.20\r\n"
 			"WBS510(TP-LINK|US|N300-5):1.20\r\n"
-			"WBS510(TP-LINK|EU|N300-5):1.20\r\n",
+			"WBS510(TP-LINK|EU|N300-5):1.20\r\n"
+			"WBS510(TP-LINK|CA|N300-5):1.20\r\n",
 		.support_trail = '\xff',
 		.soft_ver = NULL,