Parcourir la source

Revert "qualcommax: ipq50xx: fix GE_PHY and Uniphy resets"

This reverts commit 34e5bc4af54d366147a83904c094d54fec7fb025.

While fixing support for 2.5Gbps mode on uniphy in phy to phy link
setups, it inadvertently broke fixed link scenario. So let's revert this
commit until there's a fix that doesn't impact fixed links.

Signed-off-by: George Moussalem <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/18668
Signed-off-by: Robert Marko <[email protected]>
George Moussalem il y a 8 mois
Parent
commit
2259807d81

+ 0 - 0
target/linux/qualcommax/patches-6.6/0712-net-phy-qcom-Introduce-IPQ5018-internal-PHY-driver.patch → target/linux/qualcommax/patches-6.6/0711-net-phy-qcom-Introduce-IPQ5018-internal-PHY-driver.patch


+ 0 - 0
target/linux/qualcommax/patches-6.6/0711-arm64-dts-qcom-ipq5018-add-mdio-node.patch → target/linux/qualcommax/patches-6.6/0712-arm64-dts-qcom-ipq5018-add-mdio-node.patch


+ 6 - 4
target/linux/qualcommax/patches-6.6/0718-arm64-dts-qcom-ipq5018-add-ge_phy-node.patch → target/linux/qualcommax/patches-6.6/0713-arm64-dts-qcom-ipq5018-add-ge_phy-node.patch

@@ -13,7 +13,7 @@ Signed-off-by: George Moussalem <[email protected]>
 
 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
 +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
-@@ -202,6 +202,19 @@
+@@ -202,6 +202,21 @@
  			clock-names = "gcc_mdio_ahb_clk";
  
  			status = "disabled";
@@ -21,19 +21,21 @@ Signed-off-by: George Moussalem <[email protected]>
 +			ge_phy: ethernet-phy@7 {
 +				compatible = "ethernet-phy-id004d.d0c0";
 +				reg = <7>;
-+
 +				clocks = <&gcc GCC_GEPHY_RX_CLK>,
 +					 <&gcc GCC_GEPHY_TX_CLK>;
 +
 +				resets = <&gcc GCC_GEPHY_BCR>,
-+					 <&gcc GCC_GEPHY_MISC_ARES>;
++					 <&gcc GCC_GEPHY_MDC_SW_ARES>,
++					 <&gcc GCC_GEPHY_DSP_HW_ARES>,
++					 <&gcc GCC_GEPHY_RX_ARES>,
++					 <&gcc GCC_GEPHY_TX_ARES>;
 +
 +				#clock-cells = <1>;
 +			};
  		};
  
  		mdio1: mdio@90000 {
-@@ -398,8 +411,8 @@
+@@ -398,8 +413,8 @@
  				 <&pcie0_phy>,
  				 <&pcie1_phy>,
  				 <0>,

+ 0 - 0
target/linux/qualcommax/patches-6.6/0713-net-phy-qcom-ipq5018-enable-configuration-of-DAC-settings.patch → target/linux/qualcommax/patches-6.6/0714-net-phy-qcom-IPQ5018-enable-configuration-of-DAC-settings.patch


+ 0 - 0
target/linux/qualcommax/patches-6.6/0714-net-phy-qcom-add-ipq5018-initvals-and-CDT-feature.patch → target/linux/qualcommax/patches-6.6/0715-net-phy-qcom-add-IPQ5018-initvals-and-CDT-feature.patch


+ 0 - 45
target/linux/qualcommax/patches-6.6/0717-clk-qcom-gcc-ipq5018-fix-ge_phy-and-uniphy-resets.patch

@@ -1,45 +0,0 @@
-From: George Moussalem <[email protected]>
-Date: Tue, 29 Apr 2025 17:16:31 +0400
-Subject: [PATCH] clk: qcom: gcc-ipq5018: fix GE_PHY and Uniphy resets
-
-The resets for the GE PHY and Uniphy use bitmasks to assert multiple
-resets simultaneously. These bitmasks are missing and the reset is only
-performed partially against BIT(x) where x is the bit set in the GCC.
-So let's remove the single bit and replace them by the bitmasks as
-intended.
-
-Link: https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/commit/00743c3e82fa87cba4460e7a2ba32f473a9ce932
-Link: https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/commit/036bdc62aca561e8ff94a29c447fc400de2b7304
-
-Signed-off-by: zhongjia <[email protected]>
-Signed-off-by: George Moussalem <[email protected]>
----
---- a/drivers/clk/qcom/gcc-ipq5018.c
-+++ b/drivers/clk/qcom/gcc-ipq5018.c
-@@ -3566,7 +3566,7 @@ static const struct qcom_reset_map gcc_i
- 	[GCC_DDRSS_BCR] = { 0x1e000, 0 },
- 	[GCC_EDPD_BCR] = { 0x3a000, 0 },
- 	[GCC_GEPHY_BCR] = { 0x56000, 0 },
--	[GCC_GEPHY_MDC_SW_ARES] = { 0x56004, 0 },
-+	[GCC_GEPHY_MDC_SW_ARES] = { 0x56004, .bitmask = 0x3 },
- 	[GCC_GEPHY_DSP_HW_ARES] = { 0x56004, 1 },
- 	[GCC_GEPHY_RX_ARES] = { 0x56004, 2 },
- 	[GCC_GEPHY_TX_ARES] = { 0x56004, 3 },
-@@ -3646,7 +3646,7 @@ static const struct qcom_reset_map gcc_i
- 	[GCC_UNIPHY_SYS_ARES] = { 0x56104, 1 },
- 	[GCC_UNIPHY_RX_ARES] = { 0x56104, 4 },
- 	[GCC_UNIPHY_TX_ARES] = { 0x56104, 5 },
--	[GCC_UNIPHY_SOFT_RESET] = {0x56104, 0 },
-+	[GCC_UNIPHY_SOFT_RESET] = {0x56104, .bitmask = 0x32 },
- 	[GCC_USB0_BCR] = { 0x3e070, 0 },
- 	[GCC_USB0_PHY_BCR] = { 0x3e034, 0 },
- 	[GCC_WCSS_BCR] = { 0x18000, 0 },
-@@ -3659,7 +3659,7 @@ static const struct qcom_reset_map gcc_i
- 	[GCC_WCSS_AXI_S_ARES] = { 0x59008, 6 },
- 	[GCC_WCSS_Q6_BCR] = { 0x18004, 0 },
- 	[GCC_WCSSAON_RESET] = { 0x59010, 0},
--	[GCC_GEPHY_MISC_ARES] = { 0x56004, 0 },
-+	[GCC_GEPHY_MISC_ARES] = { 0x56004, .bitmask = 0xf },
- };
- 
- static const struct of_device_id gcc_ipq5018_match_table[] = {

+ 1 - 1
target/linux/qualcommax/patches-6.6/0715-clk-qcom-gcc-ipq5018-remove-the-unsupported-clk-combinati.patch → target/linux/qualcommax/patches-6.6/0721-clk-gcc-ipq5018-remove-the-unsupported-clk-combinati.patch

@@ -1,7 +1,7 @@
 From f71366e0530db2c5cecbbbb6edfbf7344bd6f83b Mon Sep 17 00:00:00 2001
 From: Ziyang Huang <[email protected]>
 Date: Sun, 8 Sep 2024 16:40:12 +0800
-Subject: [PATCH] clk: gcc-ipq5018: remove the unsupported clk
+Subject: [PATCH 1/2] clk: gcc-ipq5018: remove the unsupported clk
  combination for gmac
 
 Comment out the unsupported clock combination in the frequency table 

+ 0 - 0
target/linux/qualcommax/patches-6.6/0716-clk-qcom-gcc-ipq5018-refer-to-ge-phy-rx-and-tx-clk-providers-by-name.patch → target/linux/qualcommax/patches-6.6/0722-clk-gcc-ipq5018-refer-to-ge-phy-rx-and-tx-clk-providers-by-name.patch


+ 1 - 1
target/linux/qualcommax/patches-6.6/0816-arm64-dts-qcom-ipq5018-add-wifi-support.patch

@@ -13,7 +13,7 @@ Signed-off-by: George Moussalem <[email protected]>
 ---
 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
 +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
-@@ -697,6 +697,225 @@
+@@ -699,6 +699,225 @@
  			};
  		};