ath79: initial tl-wr1043nd v1 support

Signed-off-by: Lucian Cristian <[email protected]>
Signed-off-by: John Crispin <[email protected]>

target/linux/ath79/dts/ar9132.dtsi

@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/clock/ath79-clk.h>
+#include "ath79.dtsi"
 
 / {
 	compatible = "qca,ar9132";
@@ -160,6 +161,15 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		wmac: gmac@180c0000 {
+			compatible = "qca,ar9130-wmac";
+			reg = <0x180c0000 0x230000>;
+
+			interrupts = <2>;
+
+			status = "disabled";
+		};
 	};
 
 	usb_phy: usb-phy {
@@ -173,3 +183,14 @@
 		status = "disabled";
 	};
 };
+
+&eth0 {
+	compatible = "qca,ar9130-eth", "syscon";
+	reg = <0x19000000 0x200
+		0x18070000 0x4>;
+	pll-data = <0x1a000000 0x13000a44 0x00441099>;
+	pll-reg = <0x4 0x10 17>;
+	pll-handle = <&pll>;
+	resets = <&rst 8>, <&rst 9>;
+	reset-names = "phy", "mac";
+};

target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts → target/linux/ath79/dts/ar9132_tl-wr1043nd-v1.dts

@@ -10,6 +10,10 @@
 	compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
 	model = "TP-Link TL-WR1043ND Version 1";
 
+	aliases {
+		led-status = &system;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x2000000>;
@@ -22,19 +26,18 @@
 	};
 
 	keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		poll-interval = <20>;
-		button@0 {
+		button0 {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <60>;
 		};
 
-		button@1 {
+		button1 {
 			label = "qss";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
@@ -44,27 +47,50 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		usb {
 			label = "tp-link:green:usb";
 			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			trigger-sources = <&hub_port>;
+			linux,default-trigger = "usbport";
 		};
 
-		led@1 {
+		system: system {
 			label = "tp-link:green:system";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		led@2 {
+		qss {
 			label = "tp-link:green:qss";
 			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		led@3 {
+		wlan {
 			label = "tp-link:green:wlan";
 			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tpt";
 		};
 	};
+
+	rtl8366rb {
+		compatible = "realtek,rtl8366rb";
+		gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
+
+		resets = <&rst 8>;
+		reset-names = "switch";
+
+		mdio-bus {
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+        };
+
 };
 
 &uart {
@@ -77,6 +103,16 @@
 
 &usb {
 	status = "okay";
+
+	port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+	};
 };
 
 &usb_phy {
@@ -90,7 +126,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "s25sl064a";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
 
@@ -99,18 +135,18 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			partition@0 {
+			uboot: partition@0 {
 				label = "u-boot";
 				reg = <0x000000 0x020000>;
 				read-only;
 			};
 
-			partition@1 {
+			partition@020000 {
 				label = "firmware";
 				reg = <0x020000 0x7D0000>;
 			};
 
-			partition@2 {
+			art: partition@7F0000 {
 				label = "art";
 				reg = <0x7F0000 0x010000>;
 				read-only;
@@ -118,3 +154,25 @@
 		};
 	};
 };
+
+&eth0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	mtd-mac-address = <&uboot 0x1fc00>;
+
+	resets = <&rst 9>;
+	reset-names = "mac";
+
+	phy-handle = <&phy0>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&uboot 0x1fc00>;
+};

target/linux/ath79/image/generic-tp-link.mk

@@ -78,7 +78,7 @@ $(Device/tplink)
   IMAGE_SIZE := 7936k
 endef
 
-define Device/tl_wr1043nd_v1
+define Device/tl-wr1043nd-v1
   $(Device/tplink-8m)
   ATH_SOC := ar9132
   DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
@@ -86,7 +86,7 @@ define Device/tl_wr1043nd_v1
   TPLINK_HWID := 0x10430001
   SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd
 endef
-#TARGET_DEVICES += tl_wr1043nd_v1
+TARGET_DEVICES += tl-wr1043nd-v1
 
 define Device/tl-wdr3600
   $(Device/tplink-8mlzma)